* if it can determine the exact PrPMC type.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
PowerPC,7447 {
device_type = "cpu";
reg = <0>;
- clock-frequency = <2bb0b140>; /* Default (733 MHz) */
- bus-frequency = <7f28155>; /* 133.333333 MHz */
- timebase-frequency = <1fca055>; /* 33.333333 MHz */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ clock-frequency = <733000000>; /* Default */
+ bus-frequency = <133333333>;
+ timebase-frequency = <33333333>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
};
};
memory {
device_type = "memory";
- reg = <00000000 20000000>; /* Default (512MB) */
+ reg = <0x0 0x20000000>; /* Default (512MB) */
};
mv64x60@f1000000 { /* Marvell Discovery */
#size-cells = <1>;
model = "mv64360"; /* Default */
compatible = "marvell,mv64x60";
- clock-frequency = <7f28155>; /* 133.333333 MHz */
- reg = <f1000000 00010000>;
- virtual-reg = <f1000000>;
- ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */
- 80000000 80000000 08000000 /* PCI 0 MEM Space */
- a0000000 a0000000 04000000 /* User FLASH */
- 00000000 f1000000 00010000 /* Bridge's regs */
- f2000000 f2000000 00040000>; /* Integrated SRAM */
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
flash@a0000000 {
device_type = "rom";
compatible = "direct-mapped";
- reg = <a0000000 4000000>; /* Default (64MB) */
+ reg = <0xa0000000 0x4000000>; /* Default (64MB) */
probe-type = "CFI";
bank-width = <4>;
- partitions = <00000000 00100000 /* RO */
- 00100000 00040001 /* RW */
- 00140000 00400000 /* RO */
- 00540000 039c0000 /* RO */
- 03f00000 00100000>; /* RO */
+ partitions = <0x00000000 0x00100000 /* RO */
+ 0x00100000 0x00040001 /* RW */
+ 0x00140000 0x00400000 /* RO */
+ 0x00540000 0x039c0000 /* RO */
+ 0x03f00000 0x00100000>; /* RO */
partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
};
#size-cells = <0>;
device_type = "mdio";
compatible = "marvell,mv64x60-mdio";
- ethernet-phy@1 {
+ PHY0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
- interrupts = <4c>; /* GPP 12 */
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
reg = <1>;
};
- ethernet-phy@3 {
+ PHY1: ethernet-phy@3 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
- interrupts = <4c>; /* GPP 12 */
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
reg = <3>;
};
};
ethernet@2000 {
- reg = <2000 2000>;
+ reg = <0x2000 0x2000>;
eth0 {
device_type = "network";
compatible = "marvell,mv64x60-eth";
block-index = <0>;
- interrupts = <20>;
- interrupt-parent = <&/mv64x60/pic>;
- phy = <&/mv64x60/mdio/ethernet-phy@1>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
eth1 {
device_type = "network";
compatible = "marvell,mv64x60-eth";
block-index = <1>;
- interrupts = <21>;
- interrupt-parent = <&/mv64x60/pic>;
- phy = <&/mv64x60/mdio/ethernet-phy@3>;
+ interrupts = <33>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY1>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
};
- sdma@4000 {
+ SDMA0: sdma@4000 {
device_type = "dma";
compatible = "marvell,mv64x60-sdma";
- reg = <4000 c18>;
- virtual-reg = <f1004000>;
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
interrupt-base = <0>;
- interrupts = <24>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
};
- sdma@6000 {
+ SDMA1: sdma@6000 {
device_type = "dma";
compatible = "marvell,mv64x60-sdma";
- reg = <6000 c18>;
- virtual-reg = <f1006000>;
+ reg = <0x6000 0xc18>;
+ virtual-reg = <0xf1006000>;
interrupt-base = <0>;
- interrupts = <26>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <38>;
+ interrupt-parent = <&PIC>;
};
- brg@b200 {
+ BRG0: brg@b200 {
compatible = "marvell,mv64x60-brg";
- reg = <b200 8>;
+ reg = <0xb200 0x8>;
clock-src = <8>;
- clock-frequency = <7ed6b40>;
- current-speed = <2580>;
+ clock-frequency = <133000000>;
+ current-speed = <9600>;
bcr = <0>;
};
- brg@b208 {
+ BRG1: brg@b208 {
compatible = "marvell,mv64x60-brg";
- reg = <b208 8>;
+ reg = <0xb208 0x8>;
clock-src = <8>;
- clock-frequency = <7ed6b40>;
- current-speed = <2580>;
+ clock-frequency = <133000000>;
+ current-speed = <9600>;
bcr = <0>;
};
- cunit@f200 {
- reg = <f200 200>;
+ CUNIT: cunit@f200 {
+ reg = <0xf200 0x200>;
};
- mpscrouting@b400 {
- reg = <b400 c>;
+ MPSCROUTING: mpscrouting@b400 {
+ reg = <0xb400 0xc>;
};
- mpscintr@b800 {
- reg = <b800 100>;
- virtual-reg = <f100b800>;
+ MPSCINTR: mpscintr@b800 {
+ reg = <0xb800 0x100>;
+ virtual-reg = <0xf100b800>;
};
- mpsc@8000 {
+ MPSC0: mpsc@8000 {
device_type = "serial";
compatible = "marvell,mpsc";
- reg = <8000 38>;
- virtual-reg = <f1008000>;
- sdma = <&/mv64x60/sdma@4000>;
- brg = <&/mv64x60/brg@b200>;
- cunit = <&/mv64x60/cunit@f200>;
- mpscrouting = <&/mv64x60/mpscrouting@b400>;
- mpscintr = <&/mv64x60/mpscintr@b800>;
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
block-index = <0>;
- max_idle = <28>;
+ max_idle = <40>;
chr_1 = <0>;
chr_2 = <0>;
chr_10 = <3>;
mpcr = <0>;
- interrupts = <28>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
};
- mpsc@9000 {
+ MPSC1: mpsc@9000 {
device_type = "serial";
compatible = "marvell,mpsc";
- reg = <9000 38>;
- virtual-reg = <f1009000>;
- sdma = <&/mv64x60/sdma@6000>;
- brg = <&/mv64x60/brg@b208>;
- cunit = <&/mv64x60/cunit@f200>;
- mpscrouting = <&/mv64x60/mpscrouting@b400>;
- mpscintr = <&/mv64x60/mpscintr@b800>;
+ reg = <0x9000 0x38>;
+ virtual-reg = <0xf1009000>;
+ sdma = <&SDMA1>;
+ brg = <&BRG1>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
block-index = <1>;
- max_idle = <28>;
+ max_idle = <40>;
chr_1 = <0>;
chr_2 = <0>;
chr_10 = <3>;
mpcr = <0>;
- interrupts = <2a>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <42>;
+ interrupt-parent = <&PIC>;
};
wdt@b410 { /* watchdog timer */
compatible = "marvell,mv64x60-wdt";
- reg = <b410 8>;
- timeout = <a>; /* wdt timeout in seconds */
+ reg = <0xb410 0x8>;
+ timeout = <10>; /* wdt timeout in seconds */
};
i2c@c000 {
device_type = "i2c";
compatible = "marvell,mv64x60-i2c";
- reg = <c000 20>;
- virtual-reg = <f100c000>;
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
freq_m = <8>;
freq_n = <3>;
- timeout = <3e8>; /* 1000 = 1 second */
+ timeout = <1000>; /* 1000 = 1 second */
retries = <1>;
- interrupts = <25>;
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
};
- pic {
+ PIC: pic {
#interrupt-cells = <1>;
#address-cells = <0>;
compatible = "marvell,mv64x60-pic";
- reg = <0000 88>;
+ reg = <0x0 0x88>;
interrupt-controller;
};
mpp@f000 {
compatible = "marvell,mv64x60-mpp";
- reg = <f000 10>;
+ reg = <0xf000 0x10>;
};
gpp@f100 {
compatible = "marvell,mv64x60-gpp";
- reg = <f100 20>;
+ reg = <0xf100 0x20>;
};
pci@80000000 {
#interrupt-cells = <1>;
device_type = "pci";
compatible = "marvell,mv64x60-pci";
- reg = <0cf8 8>;
- ranges = <01000000 0 0 88000000 0 01000000
- 02000000 0 80000000 80000000 0 08000000>;
- bus-range = <0 ff>;
- clock-frequency = <3EF1480>;
- interrupt-pci-iack = <0c34>;
- interrupt-parent = <&/mv64x60/pic>;
- interrupt-map-mask = <f800 0 0 7>;
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-pci-iack = <0xc34>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0a */
- 5000 0 0 1 &/mv64x60/pic 50
- 5000 0 0 2 &/mv64x60/pic 51
- 5000 0 0 3 &/mv64x60/pic 5b
- 5000 0 0 4 &/mv64x60/pic 5d
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
/* IDSEL 0x0b */
- 5800 0 0 1 &/mv64x60/pic 5b
- 5800 0 0 2 &/mv64x60/pic 5d
- 5800 0 0 3 &/mv64x60/pic 50
- 5800 0 0 4 &/mv64x60/pic 51
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
/* IDSEL 0x0c */
- 6000 0 0 1 &/mv64x60/pic 5b
- 6000 0 0 2 &/mv64x60/pic 5d
- 6000 0 0 3 &/mv64x60/pic 50
- 6000 0 0 4 &/mv64x60/pic 51
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
/* IDSEL 0x0d */
- 6800 0 0 1 &/mv64x60/pic 5d
- 6800 0 0 2 &/mv64x60/pic 50
- 6800 0 0 3 &/mv64x60/pic 51
- 6800 0 0 4 &/mv64x60/pic 5b
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
>;
};
cpu-error@0070 {
compatible = "marvell,mv64x60-cpu-error";
- reg = <0070 10 0128 28>;
- interrupts = <03>;
- interrupt-parent = <&/mv64x60/pic>;
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
};
sram-ctrl@0380 {
compatible = "marvell,mv64x60-sram-ctrl";
- reg = <0380 80>;
- interrupts = <0d>;
- interrupt-parent = <&/mv64x60/pic>;
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
};
pci-error@1d40 {
compatible = "marvell,mv64x60-pci-error";
- reg = <1d40 40 0c28 4>;
- interrupts = <0c>;
- interrupt-parent = <&/mv64x60/pic>;
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
};
mem-ctrl@1400 {
compatible = "marvell,mv64x60-mem-ctrl";
- reg = <1400 60>;
- interrupts = <11>;
- interrupt-parent = <&/mv64x60/pic>;
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
};
};
chosen {
bootargs = "ip=on";
- linux,stdout-path = "/mv64x60@f1000000/mpsc@8000";
+ linux,stdout-path = &MPSC0;
};
};
projects / cascardo / linux.git / commitdiff