toshiba_acpi: Cleanup comment blocks and capitalization

Ensure multiline comments start with /* and */ each on its own line.
Capitalize the first word of comments.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 1cfc443..07be889 100644 (file)
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -71,7 +71,8 @@ MODULE_LICENSE("GPL");
 /* Toshiba ACPI method paths */
 #define METHOD_VIDEO_OUT       "\\_SB_.VALX.DSSX"
 
-/* The Toshiba configuration interface is composed of the HCI and the SCI,
+/*
+ * The Toshiba configuration interface is composed of the HCI and the SCI,
  * which are defined as follows:
  *
  * HCI is Toshiba's "Hardware Control Interface" which is supposed to
@@ -286,7 +287,8 @@ static const struct key_entry toshiba_acpi_alt_keymap[] = {
        { KE_END, 0 },
 };
 
-/* utility
+/*
+ * Utility
  */
 
 static inline void _set_bit(u32 *word, u32 mask, int value)
@@ -294,7 +296,8 @@ static inline void _set_bit(u32 *word, u32 mask, int value)
        *word = (*word & ~mask) | (mask * value);
 }
 
-/* acpi interface wrappers
+/*
+ * ACPI interface wrappers
  */
 
 static int write_acpi_int(const char *methodName, int val)
@@ -305,7 +308,8 @@ static int write_acpi_int(const char *methodName, int val)
        return (status == AE_OK) ? 0 : -EIO;
 }
 
-/* Perform a raw configuration call.  Here we don't care about input or output
+/*
+ * Perform a raw configuration call.  Here we don't care about input or output
  * buffer format.
  */
 static acpi_status tci_raw(struct toshiba_acpi_dev *dev,
@@ -339,7 +343,8 @@ static acpi_status tci_raw(struct toshiba_acpi_dev *dev,
        return status;
 }
 
-/* common hci tasks (get or set one or two value)
+/*
+ * Common hci tasks (get or set one or two value)
  *
  * In addition to the ACPI status, the HCI system returns a result which
  * may be useful (such as "not supported").
@@ -393,7 +398,8 @@ static u32 hci_read2(struct toshiba_acpi_dev *dev,
        return out[0];
 }
 
-/* common sci tasks
+/*
+ * Common sci tasks
  */
 
 static int sci_open(struct toshiba_acpi_dev *dev)
@@ -414,7 +420,8 @@ static int sci_open(struct toshiba_acpi_dev *dev)
                pr_info("Toshiba SCI already opened\n");
                return 1;
        } else if (out[0] == TOS_NOT_SUPPORTED) {
-               /* Some BIOSes do not have the SCI open/close functions
+               /*
+                * Some BIOSes do not have the SCI open/close functions
                 * implemented and return 0x8000 (Not Supported), failing to
                 * register some supported features.
                 *
@@ -567,10 +574,11 @@ static int toshiba_kbd_illum_available(struct toshiba_acpi_dev *dev)
                return 0;
        }
 
-       /* Check for keyboard backlight timeout max value,
+       /*
+        * Check for keyboard backlight timeout max value,
         * previous kbd backlight implementation set this to
         * 0x3c0003, and now the new implementation set this
-        * to 0x3c001a, use this to distinguish between them
+        * to 0x3c001a, use this to distinguish between them.
         */
        if (out[3] == SCI_KBD_TIME_MAX)
                dev->kbd_type = 2;
@@ -714,7 +722,8 @@ static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
        } else if (out[0] == TOS_NOT_INSTALLED) {
                pr_info("ECO led not installed");
        } else if (out[0] == TOS_INPUT_DATA_ERROR) {
-               /* If we receive 0x8300 (Input Data Error), it means that the
+               /*
+                * If we receive 0x8300 (Input Data Error), it means that the
                 * LED device is present, but that we just screwed the input
                 * parameters.
                 *
@@ -776,7 +785,8 @@ static int toshiba_accelerometer_supported(struct toshiba_acpi_dev *dev)
        u32 out[TCI_WORDS];
        acpi_status status;
 
-       /* Check if the accelerometer call exists,
+       /*
+        * Check if the accelerometer call exists,
         * this call also serves as initialization
         */
        status = tci_raw(dev, in, out);
@@ -1433,9 +1443,9 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
 
        buffer = cmd;
 
-       /* scan expression.  Multiple expressions may be delimited with ;
-        *
-        *  NOTE: to keep scanning simple, invalid fields are ignored
+       /*
+        * Scan expression.  Multiple expressions may be delimited with ;
+        * NOTE: To keep scanning simple, invalid fields are ignored.
         */
        while (remain) {
                if (sscanf(buffer, " lcd_out : %i", &value) == 1)
@@ -1444,7 +1454,7 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
                        crt_out = value & 1;
                else if (sscanf(buffer, " tv_out : %i", &value) == 1)
                        tv_out = value & 1;
-               /* advance to one character past the next ; */
+               /* Advance to one character past the next ; */
                do {
                        ++buffer;
                        --remain;
@@ -1463,7 +1473,8 @@ static ssize_t video_proc_write(struct file *file, const char __user *buf,
                        _set_bit(&new_video_out, HCI_VIDEO_OUT_CRT, crt_out);
                if (tv_out != -1)
                        _set_bit(&new_video_out, HCI_VIDEO_OUT_TV, tv_out);
-               /* To avoid unnecessary video disruption, only write the new
+               /*
+                * To avoid unnecessary video disruption, only write the new
                 * video setting if something changed. */
                if (new_video_out != video_out)
                        ret = write_acpi_int(METHOD_VIDEO_OUT, new_video_out);
@@ -1558,11 +1569,13 @@ static int keys_proc_show(struct seq_file *m, void *v)
                        dev->key_event_valid = 1;
                        dev->last_key_event = value;
                } else if (hci_result == TOS_FIFO_EMPTY) {
-                       /* better luck next time */
+                       /* Better luck next time */
                } else if (hci_result == TOS_NOT_SUPPORTED) {
-                       /* This is a workaround for an unresolved issue on
+                       /*
+                        * This is a workaround for an unresolved issue on
                         * some machines where system events sporadically
-                        * become disabled. */
+                        * become disabled.
+                        */
                        hci_result = hci_write1(dev, HCI_SYSTEM_EVENT, 1);
                        pr_notice("Re-enabled hotkeys\n");
                } else {
@@ -1631,7 +1644,8 @@ static const struct file_operations version_proc_fops = {
        .release        = single_release,
 };
 
-/* proc and module init
+/*
+ * Proc and module init
  */
 
 #define PROC_TOSHIBA           "toshiba"
@@ -1749,7 +1763,8 @@ static ssize_t kbd_backlight_mode_store(struct device *dev,
                        return -EINVAL;
        }
 
-       /* Set the Keyboard Backlight Mode where:
+       /*
+        * Set the Keyboard Backlight Mode where:
         *      Auto - KBD backlight turns off automatically in given time
         *      FN-Z - KBD backlight "toggles" when hotkey pressed
         *      ON   - KBD backlight is always on
@@ -1960,7 +1975,8 @@ static ssize_t usb_sleep_charge_store(struct device *dev,
        ret = kstrtoint(buf, 0, &state);
        if (ret)
                return ret;
-       /* Check for supported values, where:
+       /*
+        * Check for supported values, where:
         * 0 - Disabled
         * 1 - Alternate (Non USB conformant devices that require more power)
         * 2 - Auto (USB conformant devices)
@@ -2022,7 +2038,8 @@ static ssize_t sleep_functions_on_battery_store(struct device *dev,
        if (ret)
                return ret;
 
-       /* Set the status of the function:
+       /*
+        * Set the status of the function:
         * 0 - Disabled
         * 1-100 - Enabled
         */
@@ -2143,7 +2160,8 @@ static ssize_t kbd_function_keys_store(struct device *dev,
        ret = kstrtoint(buf, 0, &mode);
        if (ret)
                return ret;
-       /* Check for the function keys mode where:
+       /*
+        * Check for the function keys mode where:
         * 0 - Normal operation (F{1-12} as usual and hotkeys via FN-F{1-12})
         * 1 - Special functions (Opposite of the above setting)
         */
@@ -2223,7 +2241,8 @@ static ssize_t usb_three_store(struct device *dev,
        ret = kstrtoint(buf, 0, &state);
        if (ret)
                return ret;
-       /* Check for USB 3 mode where:
+       /*
+        * Check for USB 3 mode where:
         * 0 - Disabled (Acts like a USB 2 port, saving power)
         * 1 - Enabled
         */
@@ -2375,7 +2394,7 @@ static void toshiba_acpi_report_hotkey(struct toshiba_acpi_dev *dev,
        if (scancode == 0x100)
                return;
 
-       /* act on key press; ignore key release */
+       /* Act on key press; ignore key release */
        if (scancode & 0x80)
                return;
 
@@ -2411,7 +2430,7 @@ static void toshiba_acpi_process_hotkeys(struct toshiba_acpi_dev *dev)
                                hci_result =
                                        hci_write1(dev, HCI_SYSTEM_EVENT, 1);
                                pr_notice("Re-enabled hotkeys\n");
-                               /* fall through */
+                               /* Fall through */
                        default:
                                retries--;
                                break;
@@ -2533,7 +2552,7 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
        props.type = BACKLIGHT_PLATFORM;
        props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
 
-       /* adding an extra level and having 0 change to transflective mode */
+       /* Adding an extra level and having 0 change to transflective mode */
        if (dev->tr_backlight_supported)
                props.max_brightness++;