See also Documentation/power/runtime_pm.txt, pci=noacpi
- acpi_rsdp= [ACPI,EFI,KEXEC]
- Pass the RSDP address to the kernel, mostly used
- on machines running EFI runtime service to boot the
- second kernel for kdump.
-
acpi_apic_instance= [ACPI, IOAPIC]
Format: <int>
2: use 2nd APIC table, if available
(e.g. thinkpad_acpi, sony_acpi, etc.) instead
of the ACPI video.ko driver.
+ acpica_no_return_repair [HW, ACPI]
+ Disable AML predefined validation mechanism
+ This mechanism can repair the evaluation result to make
+ the return objects more ACPI specification compliant.
+ This option is useful for developers to identify the
+ root cause of an AML interpreter issue when the issue
+ has something to do with the repair mechanism.
+
acpi.debug_layer= [HW,ACPI,ACPI_DEBUG]
acpi.debug_level= [HW,ACPI,ACPI_DEBUG]
Format: <int>
unusable. The "log_buf_len" parameter may be useful
if you need to capture more output.
+ acpi_enforce_resources= [ACPI]
+ { strict | lax | no }
+ Check for resource conflicts between native drivers
+ and ACPI OperationRegions (SystemIO and SystemMemory
+ only). IO ports and memory declared in ACPI might be
+ used by the ACPI subsystem in arbitrary AML code and
+ can interfere with legacy drivers.
+ strict (default): access to resources claimed by ACPI
+ is denied; legacy drivers trying to access reserved
+ resources will fail to bind to device using them.
+ lax: access to resources claimed by ACPI is allowed;
+ legacy drivers trying to access reserved resources
+ will bind successfully but a warning message is logged.
+ no: ACPI OperationRegions are not marked as reserved,
+ no further checks are performed.
+
acpi_force_table_verification [HW,ACPI]
Enable table checksum verification during early stage.
By default, this is disabled due to x86 early mapping
This feature is enabled by default.
This option allows to turn off the feature.
+ acpi_no_memhotplug [ACPI] Disable memory hotplug. Useful for kdump
+ kernels.
+
acpi_no_static_ssdt [HW,ACPI]
Disable installation of static SSDTs at early boot time
By default, SSDTs contained in the RSDT/XSDT will be
dynamic table installation which will install SSDT
tables to /sys/firmware/acpi/tables/dynamic.
- acpica_no_return_repair [HW, ACPI]
- Disable AML predefined validation mechanism
- This mechanism can repair the evaluation result to make
- the return objects more ACPI specification compliant.
- This option is useful for developers to identify the
- root cause of an AML interpreter issue when the issue
- has something to do with the repair mechanism.
+ acpi_rsdp= [ACPI,EFI,KEXEC]
+ Pass the RSDP address to the kernel, mostly used
+ on machines running EFI runtime service to boot the
+ second kernel for kdump.
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
Format: To spoof as Windows 98: ="Microsoft Windows"
Use timer override. For some broken Nvidia NF5 boards
that require a timer override, but don't have HPET
- acpi_enforce_resources= [ACPI]
- { strict | lax | no }
- Check for resource conflicts between native drivers
- and ACPI OperationRegions (SystemIO and SystemMemory
- only). IO ports and memory declared in ACPI might be
- used by the ACPI subsystem in arbitrary AML code and
- can interfere with legacy drivers.
- strict (default): access to resources claimed by ACPI
- is denied; legacy drivers trying to access reserved
- resources will fail to bind to device using them.
- lax: access to resources claimed by ACPI is allowed;
- legacy drivers trying to access reserved resources
- will bind successfully but a warning message is logged.
- no: ACPI OperationRegions are not marked as reserved,
- no further checks are performed.
-
- acpi_no_memhotplug [ACPI] Disable memory hotplug. Useful for kdump
- kernels.
-
add_efi_memmap [EFI; X86] Include EFI memory map in
kernel's map of available physical RAM.
cpuidle.off=1 [CPU_IDLE]
disable the cpuidle sub-system
+ cpu_init_udelay=N
+ [X86] Delay for N microsec between assert and de-assert
+ of APIC INIT to start processors. This delay occurs
+ on every CPU online, such as boot, and resume from suspend.
+ Default: 10000
+
cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
Format:
<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
Enable debug messages at boot time. See
Documentation/dynamic-debug-howto.txt for details.
+ nompx [X86] Disables Intel Memory Protection Extensions.
+ See Documentation/x86/intel_mpx.txt for more
+ information about the feature.
+
eagerfpu= [X86]
on enable eager fpu restore
off disable eager fpu restore
auto selects the default scheme, which automatically
enables eagerfpu restore for xsaveopt.
+ module.async_probe [KNL]
+ Enable asynchronous probe on this module.
+
early_ioremap_debug [KNL]
Enable debug messages in early_ioremap support. This
is useful for tracking down temporary early mappings
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
uart[8250],mmio32,<addr>[,options]
+ uart[8250],mmio32be,<addr>[,options]
uart[8250],0x<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
MMIO inter-register address stride is either 8-bit
- (mmio) or 32-bit (mmio32).
- If none of [io|mmio|mmio32], <addr> is assumed to be
- equivalent to 'mmio'. 'options' are specified in the
- same format described for "console=ttyS<n>"; if
+ (mmio) or 32-bit (mmio32 or mmio32be).
+ If none of [io|mmio|mmio32|mmio32be], <addr> is assumed
+ to be equivalent to 'mmio'. 'options' are specified
+ in the same format described for "console=ttyS<n>"; if
unspecified, the h/w is not initialized.
pl011,<addr>
earlyprintk=serial[,0x...[,baudrate]]
earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
+ earlyprintk=pciserial,bus:device.function[,baudrate]
earlyprintk is useful when the kernel crashes before
the normal console is initialized. It is not enabled by
The list of supported hash algorithms is defined
in crypto/hash_info.h.
- ima_tcb [IMA]
+ ima_policy= [IMA]
+ The builtin measurement policy to load during IMA
+ setup. Specyfing "tcb" as the value, measures all
+ programs exec'd, files mmap'd for exec, and all files
+ opened with the read mode bit set by either the
+ effective uid (euid=0) or uid=0.
+ Format: "tcb"
+
+ ima_tcb [IMA] Deprecated. Use ima_policy= instead.
Load a policy which meets the needs of the Trusted
Computing Base. This means IMA will measure all
programs exec'd, files mmap'd for exec, and all files
ima_template= [IMA]
Select one of defined IMA measurements template formats.
- Formats: { "ima" | "ima-ng" }
+ Formats: { "ima" | "ima-ng" | "ima-sig" }
Default: "ima-ng"
ima_template_fmt=
By default, super page will be supported if Intel IOMMU
has the capability. With this option, super page will
not be supported.
+ ecs_off [Default Off]
+ By default, extended context tables will be supported if
+ the hardware advertises that it has support both for the
+ extended tables themselves, and also PASID support. With
+ this option set, extended tables will not be used even
+ on hardware which claims to support them.
intel_idle.max_cstate= [KNL,HW,ACPI,X86]
0 disables intel_idle and fall back on acpi_idle.
* [no]ncq: Turn on or off NCQ.
+ * [no]ncqtrim: Turn off queued DSM TRIM.
+
* nohrst, nosrst, norst: suppress hard, soft
and both resets.
nomca [IA-64] Disable machine check abort handling
- nomce [X86-32] Machine Check Exception
+ nomce [X86-32] Disable Machine Check Exception
nomfgpt [X86-32] Disable Multi-Function General Purpose
Timer usage (for AMD Geode machines).
Set maximum number of finished RCU callbacks to
process in one batch.
+ rcutree.dump_tree= [KNL]
+ Dump the structure of the rcu_node combining tree
+ out at early boot. This is used for diagnostic
+ purposes, to verify correct tree setup.
+
+ rcutree.gp_cleanup_delay= [KNL]
+ Set the number of jiffies to delay each step of
+ RCU grace-period cleanup. This only has effect
+ when CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is set.
+
rcutree.gp_init_delay= [KNL]
Set the number of jiffies to delay each step of
RCU grace-period initialization. This only has
- effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT is
- set.
+ effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT
+ is set.
+
+ rcutree.gp_preinit_delay= [KNL]
+ Set the number of jiffies to delay each step of
+ RCU grace-period pre-initialization, that is,
+ the propagation of recent CPU-hotplug changes up
+ the rcu_node combining tree. This only has effect
+ when CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is set.
+
+ rcutree.rcu_fanout_exact= [KNL]
+ Disable autobalancing of the rcu_node combining
+ tree. This is used by rcutorture, and might
+ possibly be useful for architectures having high
+ cache-to-cache transfer latencies.
rcutree.rcu_fanout_leaf= [KNL]
Increase the number of CPUs assigned to each
test, hence the "fake".
rcutorture.nreaders= [KNL]
- Set number of RCU readers.
+ Set number of RCU readers. The value -1 selects
+ N-1, where N is the number of CPUs. A value
+ "n" less than -1 selects N-n-2, where N is again
+ the number of CPUs. For example, -2 selects N
+ (the number of CPUs), -3 selects N+1, and so on.
rcutorture.object_debug= [KNL]
Enable debug-object double-call_rcu() testing.
READ_CAPACITY_16 command);
f = NO_REPORT_OPCODES (don't use report opcodes
command, uas only);
+ g = MAX_SECTORS_240 (don't transfer more than
+ 240 sectors at a time, uas only);
h = CAPACITY_HEURISTICS (decrease the
reported device capacity by one
sector if the number is odd);
--- /dev/null
- * @nd contains the nameidata structure for the parent directory.
+ /*
+ * Linux Security Module interfaces
+ *
+ * Copyright (C) 2001 WireX Communications, Inc <chris@wirex.com>
+ * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2001 Networks Associates Technology, Inc <ssmalley@nai.com>
+ * Copyright (C) 2001 James Morris <jmorris@intercode.com.au>
+ * Copyright (C) 2001 Silicon Graphics, Inc. (Trust Technology Group)
+ * Copyright (C) 2015 Intel Corporation.
+ * Copyright (C) 2015 Casey Schaufler <casey@schaufler-ca.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Due to this file being licensed under the GPL there is controversy over
+ * whether this permits you to write a module that #includes this file
+ * without placing your module under the GPL. Please consult a lawyer for
+ * advice before doing this.
+ *
+ */
+
+ #ifndef __LINUX_LSM_HOOKS_H
+ #define __LINUX_LSM_HOOKS_H
+
+ #include <linux/security.h>
+ #include <linux/init.h>
+ #include <linux/rculist.h>
+
+ /**
+ * Security hooks for program execution operations.
+ *
+ * @bprm_set_creds:
+ * Save security information in the bprm->security field, typically based
+ * on information about the bprm->file, for later use by the apply_creds
+ * hook. This hook may also optionally check permissions (e.g. for
+ * transitions between security domains).
+ * This hook may be called multiple times during a single execve, e.g. for
+ * interpreters. The hook can tell whether it has already been called by
+ * checking to see if @bprm->security is non-NULL. If so, then the hook
+ * may decide either to retain the security information saved earlier or
+ * to replace it.
+ * @bprm contains the linux_binprm structure.
+ * Return 0 if the hook is successful and permission is granted.
+ * @bprm_check_security:
+ * This hook mediates the point when a search for a binary handler will
+ * begin. It allows a check the @bprm->security value which is set in the
+ * preceding set_creds call. The primary difference from set_creds is
+ * that the argv list and envp list are reliably available in @bprm. This
+ * hook may be called multiple times during a single execve; and in each
+ * pass set_creds is called first.
+ * @bprm contains the linux_binprm structure.
+ * Return 0 if the hook is successful and permission is granted.
+ * @bprm_committing_creds:
+ * Prepare to install the new security attributes of a process being
+ * transformed by an execve operation, based on the old credentials
+ * pointed to by @current->cred and the information set in @bprm->cred by
+ * the bprm_set_creds hook. @bprm points to the linux_binprm structure.
+ * This hook is a good place to perform state changes on the process such
+ * as closing open file descriptors to which access will no longer be
+ * granted when the attributes are changed. This is called immediately
+ * before commit_creds().
+ * @bprm_committed_creds:
+ * Tidy up after the installation of the new security attributes of a
+ * process being transformed by an execve operation. The new credentials
+ * have, by this point, been set to @current->cred. @bprm points to the
+ * linux_binprm structure. This hook is a good place to perform state
+ * changes on the process such as clearing out non-inheritable signal
+ * state. This is called immediately after commit_creds().
+ * @bprm_secureexec:
+ * Return a boolean value (0 or 1) indicating whether a "secure exec"
+ * is required. The flag is passed in the auxiliary table
+ * on the initial stack to the ELF interpreter to indicate whether libc
+ * should enable secure mode.
+ * @bprm contains the linux_binprm structure.
+ *
+ * Security hooks for filesystem operations.
+ *
+ * @sb_alloc_security:
+ * Allocate and attach a security structure to the sb->s_security field.
+ * The s_security field is initialized to NULL when the structure is
+ * allocated.
+ * @sb contains the super_block structure to be modified.
+ * Return 0 if operation was successful.
+ * @sb_free_security:
+ * Deallocate and clear the sb->s_security field.
+ * @sb contains the super_block structure to be modified.
+ * @sb_statfs:
+ * Check permission before obtaining filesystem statistics for the @mnt
+ * mountpoint.
+ * @dentry is a handle on the superblock for the filesystem.
+ * Return 0 if permission is granted.
+ * @sb_mount:
+ * Check permission before an object specified by @dev_name is mounted on
+ * the mount point named by @nd. For an ordinary mount, @dev_name
+ * identifies a device if the file system type requires a device. For a
+ * remount (@flags & MS_REMOUNT), @dev_name is irrelevant. For a
+ * loopback/bind mount (@flags & MS_BIND), @dev_name identifies the
+ * pathname of the object being mounted.
+ * @dev_name contains the name for object being mounted.
+ * @path contains the path for mount point object.
+ * @type contains the filesystem type.
+ * @flags contains the mount flags.
+ * @data contains the filesystem-specific data.
+ * Return 0 if permission is granted.
+ * @sb_copy_data:
+ * Allow mount option data to be copied prior to parsing by the filesystem,
+ * so that the security module can extract security-specific mount
+ * options cleanly (a filesystem may modify the data e.g. with strsep()).
+ * This also allows the original mount data to be stripped of security-
+ * specific options to avoid having to make filesystems aware of them.
+ * @type the type of filesystem being mounted.
+ * @orig the original mount data copied from userspace.
+ * @copy copied data which will be passed to the security module.
+ * Returns 0 if the copy was successful.
+ * @sb_remount:
+ * Extracts security system specific mount options and verifies no changes
+ * are being made to those options.
+ * @sb superblock being remounted
+ * @data contains the filesystem-specific data.
+ * Return 0 if permission is granted.
+ * @sb_umount:
+ * Check permission before the @mnt file system is unmounted.
+ * @mnt contains the mounted file system.
+ * @flags contains the unmount flags, e.g. MNT_FORCE.
+ * Return 0 if permission is granted.
+ * @sb_pivotroot:
+ * Check permission before pivoting the root filesystem.
+ * @old_path contains the path for the new location of the
+ * current root (put_old).
+ * @new_path contains the path for the new root (new_root).
+ * Return 0 if permission is granted.
+ * @sb_set_mnt_opts:
+ * Set the security relevant mount options used for a superblock
+ * @sb the superblock to set security mount options for
+ * @opts binary data structure containing all lsm mount data
+ * @sb_clone_mnt_opts:
+ * Copy all security options from a given superblock to another
+ * @oldsb old superblock which contain information to clone
+ * @newsb new superblock which needs filled in
+ * @sb_parse_opts_str:
+ * Parse a string of security data filling in the opts structure
+ * @options string containing all mount options known by the LSM
+ * @opts binary data structure usable by the LSM
+ * @dentry_init_security:
+ * Compute a context for a dentry as the inode is not yet available
+ * since NFSv4 has no label backed by an EA anyway.
+ * @dentry dentry to use in calculating the context.
+ * @mode mode used to determine resource type.
+ * @name name of the last path component used to create file
+ * @ctx pointer to place the pointer to the resulting context in.
+ * @ctxlen point to place the length of the resulting context.
+ *
+ *
+ * Security hooks for inode operations.
+ *
+ * @inode_alloc_security:
+ * Allocate and attach a security structure to @inode->i_security. The
+ * i_security field is initialized to NULL when the inode structure is
+ * allocated.
+ * @inode contains the inode structure.
+ * Return 0 if operation was successful.
+ * @inode_free_security:
+ * @inode contains the inode structure.
+ * Deallocate the inode security structure and set @inode->i_security to
+ * NULL.
+ * @inode_init_security:
+ * Obtain the security attribute name suffix and value to set on a newly
+ * created inode and set up the incore security field for the new inode.
+ * This hook is called by the fs code as part of the inode creation
+ * transaction and provides for atomic labeling of the inode, unlike
+ * the post_create/mkdir/... hooks called by the VFS. The hook function
+ * is expected to allocate the name and value via kmalloc, with the caller
+ * being responsible for calling kfree after using them.
+ * If the security module does not use security attributes or does
+ * not wish to put a security attribute on this particular inode,
+ * then it should return -EOPNOTSUPP to skip this processing.
+ * @inode contains the inode structure of the newly created inode.
+ * @dir contains the inode structure of the parent directory.
+ * @qstr contains the last path component of the new object
+ * @name will be set to the allocated name suffix (e.g. selinux).
+ * @value will be set to the allocated attribute value.
+ * @len will be set to the length of the value.
+ * Returns 0 if @name and @value have been successfully set,
+ * -EOPNOTSUPP if no security attribute is needed, or
+ * -ENOMEM on memory allocation failure.
+ * @inode_create:
+ * Check permission to create a regular file.
+ * @dir contains inode structure of the parent of the new file.
+ * @dentry contains the dentry structure for the file to be created.
+ * @mode contains the file mode of the file to be created.
+ * Return 0 if permission is granted.
+ * @inode_link:
+ * Check permission before creating a new hard link to a file.
+ * @old_dentry contains the dentry structure for an existing
+ * link to the file.
+ * @dir contains the inode structure of the parent directory
+ * of the new link.
+ * @new_dentry contains the dentry structure for the new link.
+ * Return 0 if permission is granted.
+ * @path_link:
+ * Check permission before creating a new hard link to a file.
+ * @old_dentry contains the dentry structure for an existing link
+ * to the file.
+ * @new_dir contains the path structure of the parent directory of
+ * the new link.
+ * @new_dentry contains the dentry structure for the new link.
+ * Return 0 if permission is granted.
+ * @inode_unlink:
+ * Check the permission to remove a hard link to a file.
+ * @dir contains the inode structure of parent directory of the file.
+ * @dentry contains the dentry structure for file to be unlinked.
+ * Return 0 if permission is granted.
+ * @path_unlink:
+ * Check the permission to remove a hard link to a file.
+ * @dir contains the path structure of parent directory of the file.
+ * @dentry contains the dentry structure for file to be unlinked.
+ * Return 0 if permission is granted.
+ * @inode_symlink:
+ * Check the permission to create a symbolic link to a file.
+ * @dir contains the inode structure of parent directory of
+ * the symbolic link.
+ * @dentry contains the dentry structure of the symbolic link.
+ * @old_name contains the pathname of file.
+ * Return 0 if permission is granted.
+ * @path_symlink:
+ * Check the permission to create a symbolic link to a file.
+ * @dir contains the path structure of parent directory of
+ * the symbolic link.
+ * @dentry contains the dentry structure of the symbolic link.
+ * @old_name contains the pathname of file.
+ * Return 0 if permission is granted.
+ * @inode_mkdir:
+ * Check permissions to create a new directory in the existing directory
+ * associated with inode structure @dir.
+ * @dir contains the inode structure of parent of the directory
+ * to be created.
+ * @dentry contains the dentry structure of new directory.
+ * @mode contains the mode of new directory.
+ * Return 0 if permission is granted.
+ * @path_mkdir:
+ * Check permissions to create a new directory in the existing directory
+ * associated with path structure @path.
+ * @dir contains the path structure of parent of the directory
+ * to be created.
+ * @dentry contains the dentry structure of new directory.
+ * @mode contains the mode of new directory.
+ * Return 0 if permission is granted.
+ * @inode_rmdir:
+ * Check the permission to remove a directory.
+ * @dir contains the inode structure of parent of the directory
+ * to be removed.
+ * @dentry contains the dentry structure of directory to be removed.
+ * Return 0 if permission is granted.
+ * @path_rmdir:
+ * Check the permission to remove a directory.
+ * @dir contains the path structure of parent of the directory to be
+ * removed.
+ * @dentry contains the dentry structure of directory to be removed.
+ * Return 0 if permission is granted.
+ * @inode_mknod:
+ * Check permissions when creating a special file (or a socket or a fifo
+ * file created via the mknod system call). Note that if mknod operation
+ * is being done for a regular file, then the create hook will be called
+ * and not this hook.
+ * @dir contains the inode structure of parent of the new file.
+ * @dentry contains the dentry structure of the new file.
+ * @mode contains the mode of the new file.
+ * @dev contains the device number.
+ * Return 0 if permission is granted.
+ * @path_mknod:
+ * Check permissions when creating a file. Note that this hook is called
+ * even if mknod operation is being done for a regular file.
+ * @dir contains the path structure of parent of the new file.
+ * @dentry contains the dentry structure of the new file.
+ * @mode contains the mode of the new file.
+ * @dev contains the undecoded device number. Use new_decode_dev() to get
+ * the decoded device number.
+ * Return 0 if permission is granted.
+ * @inode_rename:
+ * Check for permission to rename a file or directory.
+ * @old_dir contains the inode structure for parent of the old link.
+ * @old_dentry contains the dentry structure of the old link.
+ * @new_dir contains the inode structure for parent of the new link.
+ * @new_dentry contains the dentry structure of the new link.
+ * Return 0 if permission is granted.
+ * @path_rename:
+ * Check for permission to rename a file or directory.
+ * @old_dir contains the path structure for parent of the old link.
+ * @old_dentry contains the dentry structure of the old link.
+ * @new_dir contains the path structure for parent of the new link.
+ * @new_dentry contains the dentry structure of the new link.
+ * Return 0 if permission is granted.
+ * @path_chmod:
+ * Check for permission to change DAC's permission of a file or directory.
+ * @dentry contains the dentry structure.
+ * @mnt contains the vfsmnt structure.
+ * @mode contains DAC's mode.
+ * Return 0 if permission is granted.
+ * @path_chown:
+ * Check for permission to change owner/group of a file or directory.
+ * @path contains the path structure.
+ * @uid contains new owner's ID.
+ * @gid contains new group's ID.
+ * Return 0 if permission is granted.
+ * @path_chroot:
+ * Check for permission to change root directory.
+ * @path contains the path structure.
+ * Return 0 if permission is granted.
+ * @inode_readlink:
+ * Check the permission to read the symbolic link.
+ * @dentry contains the dentry structure for the file link.
+ * Return 0 if permission is granted.
+ * @inode_follow_link:
+ * Check permission to follow a symbolic link when looking up a pathname.
+ * @dentry contains the dentry structure for the link.
- int (*inode_follow_link)(struct dentry *dentry, struct nameidata *nd);
++ * @inode contains the inode, which itself is not stable in RCU-walk
++ * @rcu indicates whether we are in RCU-walk mode.
+ * Return 0 if permission is granted.
+ * @inode_permission:
+ * Check permission before accessing an inode. This hook is called by the
+ * existing Linux permission function, so a security module can use it to
+ * provide additional checking for existing Linux permission checks.
+ * Notice that this hook is called when a file is opened (as well as many
+ * other operations), whereas the file_security_ops permission hook is
+ * called when the actual read/write operations are performed.
+ * @inode contains the inode structure to check.
+ * @mask contains the permission mask.
+ * Return 0 if permission is granted.
+ * @inode_setattr:
+ * Check permission before setting file attributes. Note that the kernel
+ * call to notify_change is performed from several locations, whenever
+ * file attributes change (such as when a file is truncated, chown/chmod
+ * operations, transferring disk quotas, etc).
+ * @dentry contains the dentry structure for the file.
+ * @attr is the iattr structure containing the new file attributes.
+ * Return 0 if permission is granted.
+ * @path_truncate:
+ * Check permission before truncating a file.
+ * @path contains the path structure for the file.
+ * Return 0 if permission is granted.
+ * @inode_getattr:
+ * Check permission before obtaining file attributes.
+ * @mnt is the vfsmount where the dentry was looked up
+ * @dentry contains the dentry structure for the file.
+ * Return 0 if permission is granted.
+ * @inode_setxattr:
+ * Check permission before setting the extended attributes
+ * @value identified by @name for @dentry.
+ * Return 0 if permission is granted.
+ * @inode_post_setxattr:
+ * Update inode security field after successful setxattr operation.
+ * @value identified by @name for @dentry.
+ * @inode_getxattr:
+ * Check permission before obtaining the extended attributes
+ * identified by @name for @dentry.
+ * Return 0 if permission is granted.
+ * @inode_listxattr:
+ * Check permission before obtaining the list of extended attribute
+ * names for @dentry.
+ * Return 0 if permission is granted.
+ * @inode_removexattr:
+ * Check permission before removing the extended attribute
+ * identified by @name for @dentry.
+ * Return 0 if permission is granted.
+ * @inode_getsecurity:
+ * Retrieve a copy of the extended attribute representation of the
+ * security label associated with @name for @inode via @buffer. Note that
+ * @name is the remainder of the attribute name after the security prefix
+ * has been removed. @alloc is used to specify of the call should return a
+ * value via the buffer or just the value length Return size of buffer on
+ * success.
+ * @inode_setsecurity:
+ * Set the security label associated with @name for @inode from the
+ * extended attribute value @value. @size indicates the size of the
+ * @value in bytes. @flags may be XATTR_CREATE, XATTR_REPLACE, or 0.
+ * Note that @name is the remainder of the attribute name after the
+ * security. prefix has been removed.
+ * Return 0 on success.
+ * @inode_listsecurity:
+ * Copy the extended attribute names for the security labels
+ * associated with @inode into @buffer. The maximum size of @buffer
+ * is specified by @buffer_size. @buffer may be NULL to request
+ * the size of the buffer required.
+ * Returns number of bytes used/required on success.
+ * @inode_need_killpriv:
+ * Called when an inode has been changed.
+ * @dentry is the dentry being changed.
+ * Return <0 on error to abort the inode change operation.
+ * Return 0 if inode_killpriv does not need to be called.
+ * Return >0 if inode_killpriv does need to be called.
+ * @inode_killpriv:
+ * The setuid bit is being removed. Remove similar security labels.
+ * Called with the dentry->d_inode->i_mutex held.
+ * @dentry is the dentry being changed.
+ * Return 0 on success. If error is returned, then the operation
+ * causing setuid bit removal is failed.
+ * @inode_getsecid:
+ * Get the secid associated with the node.
+ * @inode contains a pointer to the inode.
+ * @secid contains a pointer to the location where result will be saved.
+ * In case of failure, @secid will be set to zero.
+ *
+ * Security hooks for file operations
+ *
+ * @file_permission:
+ * Check file permissions before accessing an open file. This hook is
+ * called by various operations that read or write files. A security
+ * module can use this hook to perform additional checking on these
+ * operations, e.g. to revalidate permissions on use to support privilege
+ * bracketing or policy changes. Notice that this hook is used when the
+ * actual read/write operations are performed, whereas the
+ * inode_security_ops hook is called when a file is opened (as well as
+ * many other operations).
+ * Caveat: Although this hook can be used to revalidate permissions for
+ * various system call operations that read or write files, it does not
+ * address the revalidation of permissions for memory-mapped files.
+ * Security modules must handle this separately if they need such
+ * revalidation.
+ * @file contains the file structure being accessed.
+ * @mask contains the requested permissions.
+ * Return 0 if permission is granted.
+ * @file_alloc_security:
+ * Allocate and attach a security structure to the file->f_security field.
+ * The security field is initialized to NULL when the structure is first
+ * created.
+ * @file contains the file structure to secure.
+ * Return 0 if the hook is successful and permission is granted.
+ * @file_free_security:
+ * Deallocate and free any security structures stored in file->f_security.
+ * @file contains the file structure being modified.
+ * @file_ioctl:
+ * @file contains the file structure.
+ * @cmd contains the operation to perform.
+ * @arg contains the operational arguments.
+ * Check permission for an ioctl operation on @file. Note that @arg
+ * sometimes represents a user space pointer; in other cases, it may be a
+ * simple integer value. When @arg represents a user space pointer, it
+ * should never be used by the security module.
+ * Return 0 if permission is granted.
+ * @mmap_addr :
+ * Check permissions for a mmap operation at @addr.
+ * @addr contains virtual address that will be used for the operation.
+ * Return 0 if permission is granted.
+ * @mmap_file :
+ * Check permissions for a mmap operation. The @file may be NULL, e.g.
+ * if mapping anonymous memory.
+ * @file contains the file structure for file to map (may be NULL).
+ * @reqprot contains the protection requested by the application.
+ * @prot contains the protection that will be applied by the kernel.
+ * @flags contains the operational flags.
+ * Return 0 if permission is granted.
+ * @file_mprotect:
+ * Check permissions before changing memory access permissions.
+ * @vma contains the memory region to modify.
+ * @reqprot contains the protection requested by the application.
+ * @prot contains the protection that will be applied by the kernel.
+ * Return 0 if permission is granted.
+ * @file_lock:
+ * Check permission before performing file locking operations.
+ * Note: this hook mediates both flock and fcntl style locks.
+ * @file contains the file structure.
+ * @cmd contains the posix-translated lock operation to perform
+ * (e.g. F_RDLCK, F_WRLCK).
+ * Return 0 if permission is granted.
+ * @file_fcntl:
+ * Check permission before allowing the file operation specified by @cmd
+ * from being performed on the file @file. Note that @arg sometimes
+ * represents a user space pointer; in other cases, it may be a simple
+ * integer value. When @arg represents a user space pointer, it should
+ * never be used by the security module.
+ * @file contains the file structure.
+ * @cmd contains the operation to be performed.
+ * @arg contains the operational arguments.
+ * Return 0 if permission is granted.
+ * @file_set_fowner:
+ * Save owner security information (typically from current->security) in
+ * file->f_security for later use by the send_sigiotask hook.
+ * @file contains the file structure to update.
+ * Return 0 on success.
+ * @file_send_sigiotask:
+ * Check permission for the file owner @fown to send SIGIO or SIGURG to the
+ * process @tsk. Note that this hook is sometimes called from interrupt.
+ * Note that the fown_struct, @fown, is never outside the context of a
+ * struct file, so the file structure (and associated security information)
+ * can always be obtained:
+ * container_of(fown, struct file, f_owner)
+ * @tsk contains the structure of task receiving signal.
+ * @fown contains the file owner information.
+ * @sig is the signal that will be sent. When 0, kernel sends SIGIO.
+ * Return 0 if permission is granted.
+ * @file_receive:
+ * This hook allows security modules to control the ability of a process
+ * to receive an open file descriptor via socket IPC.
+ * @file contains the file structure being received.
+ * Return 0 if permission is granted.
+ * @file_open
+ * Save open-time permission checking state for later use upon
+ * file_permission, and recheck access if anything has changed
+ * since inode_permission.
+ *
+ * Security hooks for task operations.
+ *
+ * @task_create:
+ * Check permission before creating a child process. See the clone(2)
+ * manual page for definitions of the @clone_flags.
+ * @clone_flags contains the flags indicating what should be shared.
+ * Return 0 if permission is granted.
+ * @task_free:
+ * @task task being freed
+ * Handle release of task-related resources. (Note that this can be called
+ * from interrupt context.)
+ * @cred_alloc_blank:
+ * @cred points to the credentials.
+ * @gfp indicates the atomicity of any memory allocations.
+ * Only allocate sufficient memory and attach to @cred such that
+ * cred_transfer() will not get ENOMEM.
+ * @cred_free:
+ * @cred points to the credentials.
+ * Deallocate and clear the cred->security field in a set of credentials.
+ * @cred_prepare:
+ * @new points to the new credentials.
+ * @old points to the original credentials.
+ * @gfp indicates the atomicity of any memory allocations.
+ * Prepare a new set of credentials by copying the data from the old set.
+ * @cred_transfer:
+ * @new points to the new credentials.
+ * @old points to the original credentials.
+ * Transfer data from original creds to new creds
+ * @kernel_act_as:
+ * Set the credentials for a kernel service to act as (subjective context).
+ * @new points to the credentials to be modified.
+ * @secid specifies the security ID to be set
+ * The current task must be the one that nominated @secid.
+ * Return 0 if successful.
+ * @kernel_create_files_as:
+ * Set the file creation context in a set of credentials to be the same as
+ * the objective context of the specified inode.
+ * @new points to the credentials to be modified.
+ * @inode points to the inode to use as a reference.
+ * The current task must be the one that nominated @inode.
+ * Return 0 if successful.
+ * @kernel_fw_from_file:
+ * Load firmware from userspace (not called for built-in firmware).
+ * @file contains the file structure pointing to the file containing
+ * the firmware to load. This argument will be NULL if the firmware
+ * was loaded via the uevent-triggered blob-based interface exposed
+ * by CONFIG_FW_LOADER_USER_HELPER.
+ * @buf pointer to buffer containing firmware contents.
+ * @size length of the firmware contents.
+ * Return 0 if permission is granted.
+ * @kernel_module_request:
+ * Ability to trigger the kernel to automatically upcall to userspace for
+ * userspace to load a kernel module with the given name.
+ * @kmod_name name of the module requested by the kernel
+ * Return 0 if successful.
+ * @kernel_module_from_file:
+ * Load a kernel module from userspace.
+ * @file contains the file structure pointing to the file containing
+ * the kernel module to load. If the module is being loaded from a blob,
+ * this argument will be NULL.
+ * Return 0 if permission is granted.
+ * @task_fix_setuid:
+ * Update the module's state after setting one or more of the user
+ * identity attributes of the current process. The @flags parameter
+ * indicates which of the set*uid system calls invoked this hook. If
+ * @new is the set of credentials that will be installed. Modifications
+ * should be made to this rather than to @current->cred.
+ * @old is the set of credentials that are being replaces
+ * @flags contains one of the LSM_SETID_* values.
+ * Return 0 on success.
+ * @task_setpgid:
+ * Check permission before setting the process group identifier of the
+ * process @p to @pgid.
+ * @p contains the task_struct for process being modified.
+ * @pgid contains the new pgid.
+ * Return 0 if permission is granted.
+ * @task_getpgid:
+ * Check permission before getting the process group identifier of the
+ * process @p.
+ * @p contains the task_struct for the process.
+ * Return 0 if permission is granted.
+ * @task_getsid:
+ * Check permission before getting the session identifier of the process
+ * @p.
+ * @p contains the task_struct for the process.
+ * Return 0 if permission is granted.
+ * @task_getsecid:
+ * Retrieve the security identifier of the process @p.
+ * @p contains the task_struct for the process and place is into @secid.
+ * In case of failure, @secid will be set to zero.
+ *
+ * @task_setnice:
+ * Check permission before setting the nice value of @p to @nice.
+ * @p contains the task_struct of process.
+ * @nice contains the new nice value.
+ * Return 0 if permission is granted.
+ * @task_setioprio
+ * Check permission before setting the ioprio value of @p to @ioprio.
+ * @p contains the task_struct of process.
+ * @ioprio contains the new ioprio value
+ * Return 0 if permission is granted.
+ * @task_getioprio
+ * Check permission before getting the ioprio value of @p.
+ * @p contains the task_struct of process.
+ * Return 0 if permission is granted.
+ * @task_setrlimit:
+ * Check permission before setting the resource limits of the current
+ * process for @resource to @new_rlim. The old resource limit values can
+ * be examined by dereferencing (current->signal->rlim + resource).
+ * @resource contains the resource whose limit is being set.
+ * @new_rlim contains the new limits for @resource.
+ * Return 0 if permission is granted.
+ * @task_setscheduler:
+ * Check permission before setting scheduling policy and/or parameters of
+ * process @p based on @policy and @lp.
+ * @p contains the task_struct for process.
+ * @policy contains the scheduling policy.
+ * @lp contains the scheduling parameters.
+ * Return 0 if permission is granted.
+ * @task_getscheduler:
+ * Check permission before obtaining scheduling information for process
+ * @p.
+ * @p contains the task_struct for process.
+ * Return 0 if permission is granted.
+ * @task_movememory
+ * Check permission before moving memory owned by process @p.
+ * @p contains the task_struct for process.
+ * Return 0 if permission is granted.
+ * @task_kill:
+ * Check permission before sending signal @sig to @p. @info can be NULL,
+ * the constant 1, or a pointer to a siginfo structure. If @info is 1 or
+ * SI_FROMKERNEL(info) is true, then the signal should be viewed as coming
+ * from the kernel and should typically be permitted.
+ * SIGIO signals are handled separately by the send_sigiotask hook in
+ * file_security_ops.
+ * @p contains the task_struct for process.
+ * @info contains the signal information.
+ * @sig contains the signal value.
+ * @secid contains the sid of the process where the signal originated
+ * Return 0 if permission is granted.
+ * @task_wait:
+ * Check permission before allowing a process to reap a child process @p
+ * and collect its status information.
+ * @p contains the task_struct for process.
+ * Return 0 if permission is granted.
+ * @task_prctl:
+ * Check permission before performing a process control operation on the
+ * current process.
+ * @option contains the operation.
+ * @arg2 contains a argument.
+ * @arg3 contains a argument.
+ * @arg4 contains a argument.
+ * @arg5 contains a argument.
+ * Return -ENOSYS if no-one wanted to handle this op, any other value to
+ * cause prctl() to return immediately with that value.
+ * @task_to_inode:
+ * Set the security attributes for an inode based on an associated task's
+ * security attributes, e.g. for /proc/pid inodes.
+ * @p contains the task_struct for the task.
+ * @inode contains the inode structure for the inode.
+ *
+ * Security hooks for Netlink messaging.
+ *
+ * @netlink_send:
+ * Save security information for a netlink message so that permission
+ * checking can be performed when the message is processed. The security
+ * information can be saved using the eff_cap field of the
+ * netlink_skb_parms structure. Also may be used to provide fine
+ * grained control over message transmission.
+ * @sk associated sock of task sending the message.
+ * @skb contains the sk_buff structure for the netlink message.
+ * Return 0 if the information was successfully saved and message
+ * is allowed to be transmitted.
+ *
+ * Security hooks for Unix domain networking.
+ *
+ * @unix_stream_connect:
+ * Check permissions before establishing a Unix domain stream connection
+ * between @sock and @other.
+ * @sock contains the sock structure.
+ * @other contains the peer sock structure.
+ * @newsk contains the new sock structure.
+ * Return 0 if permission is granted.
+ * @unix_may_send:
+ * Check permissions before connecting or sending datagrams from @sock to
+ * @other.
+ * @sock contains the socket structure.
+ * @other contains the peer socket structure.
+ * Return 0 if permission is granted.
+ *
+ * The @unix_stream_connect and @unix_may_send hooks were necessary because
+ * Linux provides an alternative to the conventional file name space for Unix
+ * domain sockets. Whereas binding and connecting to sockets in the file name
+ * space is mediated by the typical file permissions (and caught by the mknod
+ * and permission hooks in inode_security_ops), binding and connecting to
+ * sockets in the abstract name space is completely unmediated. Sufficient
+ * control of Unix domain sockets in the abstract name space isn't possible
+ * using only the socket layer hooks, since we need to know the actual target
+ * socket, which is not looked up until we are inside the af_unix code.
+ *
+ * Security hooks for socket operations.
+ *
+ * @socket_create:
+ * Check permissions prior to creating a new socket.
+ * @family contains the requested protocol family.
+ * @type contains the requested communications type.
+ * @protocol contains the requested protocol.
+ * @kern set to 1 if a kernel socket.
+ * Return 0 if permission is granted.
+ * @socket_post_create:
+ * This hook allows a module to update or allocate a per-socket security
+ * structure. Note that the security field was not added directly to the
+ * socket structure, but rather, the socket security information is stored
+ * in the associated inode. Typically, the inode alloc_security hook will
+ * allocate and and attach security information to
+ * sock->inode->i_security. This hook may be used to update the
+ * sock->inode->i_security field with additional information that wasn't
+ * available when the inode was allocated.
+ * @sock contains the newly created socket structure.
+ * @family contains the requested protocol family.
+ * @type contains the requested communications type.
+ * @protocol contains the requested protocol.
+ * @kern set to 1 if a kernel socket.
+ * @socket_bind:
+ * Check permission before socket protocol layer bind operation is
+ * performed and the socket @sock is bound to the address specified in the
+ * @address parameter.
+ * @sock contains the socket structure.
+ * @address contains the address to bind to.
+ * @addrlen contains the length of address.
+ * Return 0 if permission is granted.
+ * @socket_connect:
+ * Check permission before socket protocol layer connect operation
+ * attempts to connect socket @sock to a remote address, @address.
+ * @sock contains the socket structure.
+ * @address contains the address of remote endpoint.
+ * @addrlen contains the length of address.
+ * Return 0 if permission is granted.
+ * @socket_listen:
+ * Check permission before socket protocol layer listen operation.
+ * @sock contains the socket structure.
+ * @backlog contains the maximum length for the pending connection queue.
+ * Return 0 if permission is granted.
+ * @socket_accept:
+ * Check permission before accepting a new connection. Note that the new
+ * socket, @newsock, has been created and some information copied to it,
+ * but the accept operation has not actually been performed.
+ * @sock contains the listening socket structure.
+ * @newsock contains the newly created server socket for connection.
+ * Return 0 if permission is granted.
+ * @socket_sendmsg:
+ * Check permission before transmitting a message to another socket.
+ * @sock contains the socket structure.
+ * @msg contains the message to be transmitted.
+ * @size contains the size of message.
+ * Return 0 if permission is granted.
+ * @socket_recvmsg:
+ * Check permission before receiving a message from a socket.
+ * @sock contains the socket structure.
+ * @msg contains the message structure.
+ * @size contains the size of message structure.
+ * @flags contains the operational flags.
+ * Return 0 if permission is granted.
+ * @socket_getsockname:
+ * Check permission before the local address (name) of the socket object
+ * @sock is retrieved.
+ * @sock contains the socket structure.
+ * Return 0 if permission is granted.
+ * @socket_getpeername:
+ * Check permission before the remote address (name) of a socket object
+ * @sock is retrieved.
+ * @sock contains the socket structure.
+ * Return 0 if permission is granted.
+ * @socket_getsockopt:
+ * Check permissions before retrieving the options associated with socket
+ * @sock.
+ * @sock contains the socket structure.
+ * @level contains the protocol level to retrieve option from.
+ * @optname contains the name of option to retrieve.
+ * Return 0 if permission is granted.
+ * @socket_setsockopt:
+ * Check permissions before setting the options associated with socket
+ * @sock.
+ * @sock contains the socket structure.
+ * @level contains the protocol level to set options for.
+ * @optname contains the name of the option to set.
+ * Return 0 if permission is granted.
+ * @socket_shutdown:
+ * Checks permission before all or part of a connection on the socket
+ * @sock is shut down.
+ * @sock contains the socket structure.
+ * @how contains the flag indicating how future sends and receives
+ * are handled.
+ * Return 0 if permission is granted.
+ * @socket_sock_rcv_skb:
+ * Check permissions on incoming network packets. This hook is distinct
+ * from Netfilter's IP input hooks since it is the first time that the
+ * incoming sk_buff @skb has been associated with a particular socket, @sk.
+ * Must not sleep inside this hook because some callers hold spinlocks.
+ * @sk contains the sock (not socket) associated with the incoming sk_buff.
+ * @skb contains the incoming network data.
+ * @socket_getpeersec_stream:
+ * This hook allows the security module to provide peer socket security
+ * state for unix or connected tcp sockets to userspace via getsockopt
+ * SO_GETPEERSEC. For tcp sockets this can be meaningful if the
+ * socket is associated with an ipsec SA.
+ * @sock is the local socket.
+ * @optval userspace memory where the security state is to be copied.
+ * @optlen userspace int where the module should copy the actual length
+ * of the security state.
+ * @len as input is the maximum length to copy to userspace provided
+ * by the caller.
+ * Return 0 if all is well, otherwise, typical getsockopt return
+ * values.
+ * @socket_getpeersec_dgram:
+ * This hook allows the security module to provide peer socket security
+ * state for udp sockets on a per-packet basis to userspace via
+ * getsockopt SO_GETPEERSEC. The application must first have indicated
+ * the IP_PASSSEC option via getsockopt. It can then retrieve the
+ * security state returned by this hook for a packet via the SCM_SECURITY
+ * ancillary message type.
+ * @skb is the skbuff for the packet being queried
+ * @secdata is a pointer to a buffer in which to copy the security data
+ * @seclen is the maximum length for @secdata
+ * Return 0 on success, error on failure.
+ * @sk_alloc_security:
+ * Allocate and attach a security structure to the sk->sk_security field,
+ * which is used to copy security attributes between local stream sockets.
+ * @sk_free_security:
+ * Deallocate security structure.
+ * @sk_clone_security:
+ * Clone/copy security structure.
+ * @sk_getsecid:
+ * Retrieve the LSM-specific secid for the sock to enable caching
+ * of network authorizations.
+ * @sock_graft:
+ * Sets the socket's isec sid to the sock's sid.
+ * @inet_conn_request:
+ * Sets the openreq's sid to socket's sid with MLS portion taken
+ * from peer sid.
+ * @inet_csk_clone:
+ * Sets the new child socket's sid to the openreq sid.
+ * @inet_conn_established:
+ * Sets the connection's peersid to the secmark on skb.
+ * @secmark_relabel_packet:
+ * check if the process should be allowed to relabel packets to
+ * the given secid
+ * @security_secmark_refcount_inc
+ * tells the LSM to increment the number of secmark labeling rules loaded
+ * @security_secmark_refcount_dec
+ * tells the LSM to decrement the number of secmark labeling rules loaded
+ * @req_classify_flow:
+ * Sets the flow's sid to the openreq sid.
+ * @tun_dev_alloc_security:
+ * This hook allows a module to allocate a security structure for a TUN
+ * device.
+ * @security pointer to a security structure pointer.
+ * Returns a zero on success, negative values on failure.
+ * @tun_dev_free_security:
+ * This hook allows a module to free the security structure for a TUN
+ * device.
+ * @security pointer to the TUN device's security structure
+ * @tun_dev_create:
+ * Check permissions prior to creating a new TUN device.
+ * @tun_dev_attach_queue:
+ * Check permissions prior to attaching to a TUN device queue.
+ * @security pointer to the TUN device's security structure.
+ * @tun_dev_attach:
+ * This hook can be used by the module to update any security state
+ * associated with the TUN device's sock structure.
+ * @sk contains the existing sock structure.
+ * @security pointer to the TUN device's security structure.
+ * @tun_dev_open:
+ * This hook can be used by the module to update any security state
+ * associated with the TUN device's security structure.
+ * @security pointer to the TUN devices's security structure.
+ *
+ * Security hooks for XFRM operations.
+ *
+ * @xfrm_policy_alloc_security:
+ * @ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy
+ * Database used by the XFRM system.
+ * @sec_ctx contains the security context information being provided by
+ * the user-level policy update program (e.g., setkey).
+ * Allocate a security structure to the xp->security field; the security
+ * field is initialized to NULL when the xfrm_policy is allocated.
+ * Return 0 if operation was successful (memory to allocate, legal context)
+ * @gfp is to specify the context for the allocation
+ * @xfrm_policy_clone_security:
+ * @old_ctx contains an existing xfrm_sec_ctx.
+ * @new_ctxp contains a new xfrm_sec_ctx being cloned from old.
+ * Allocate a security structure in new_ctxp that contains the
+ * information from the old_ctx structure.
+ * Return 0 if operation was successful (memory to allocate).
+ * @xfrm_policy_free_security:
+ * @ctx contains the xfrm_sec_ctx
+ * Deallocate xp->security.
+ * @xfrm_policy_delete_security:
+ * @ctx contains the xfrm_sec_ctx.
+ * Authorize deletion of xp->security.
+ * @xfrm_state_alloc:
+ * @x contains the xfrm_state being added to the Security Association
+ * Database by the XFRM system.
+ * @sec_ctx contains the security context information being provided by
+ * the user-level SA generation program (e.g., setkey or racoon).
+ * Allocate a security structure to the x->security field; the security
+ * field is initialized to NULL when the xfrm_state is allocated. Set the
+ * context to correspond to sec_ctx. Return 0 if operation was successful
+ * (memory to allocate, legal context).
+ * @xfrm_state_alloc_acquire:
+ * @x contains the xfrm_state being added to the Security Association
+ * Database by the XFRM system.
+ * @polsec contains the policy's security context.
+ * @secid contains the secid from which to take the mls portion of the
+ * context.
+ * Allocate a security structure to the x->security field; the security
+ * field is initialized to NULL when the xfrm_state is allocated. Set the
+ * context to correspond to secid. Return 0 if operation was successful
+ * (memory to allocate, legal context).
+ * @xfrm_state_free_security:
+ * @x contains the xfrm_state.
+ * Deallocate x->security.
+ * @xfrm_state_delete_security:
+ * @x contains the xfrm_state.
+ * Authorize deletion of x->security.
+ * @xfrm_policy_lookup:
+ * @ctx contains the xfrm_sec_ctx for which the access control is being
+ * checked.
+ * @fl_secid contains the flow security label that is used to authorize
+ * access to the policy xp.
+ * @dir contains the direction of the flow (input or output).
+ * Check permission when a flow selects a xfrm_policy for processing
+ * XFRMs on a packet. The hook is called when selecting either a
+ * per-socket policy or a generic xfrm policy.
+ * Return 0 if permission is granted, -ESRCH otherwise, or -errno
+ * on other errors.
+ * @xfrm_state_pol_flow_match:
+ * @x contains the state to match.
+ * @xp contains the policy to check for a match.
+ * @fl contains the flow to check for a match.
+ * Return 1 if there is a match.
+ * @xfrm_decode_session:
+ * @skb points to skb to decode.
+ * @secid points to the flow key secid to set.
+ * @ckall says if all xfrms used should be checked for same secid.
+ * Return 0 if ckall is zero or all xfrms used have the same secid.
+ *
+ * Security hooks affecting all Key Management operations
+ *
+ * @key_alloc:
+ * Permit allocation of a key and assign security data. Note that key does
+ * not have a serial number assigned at this point.
+ * @key points to the key.
+ * @flags is the allocation flags
+ * Return 0 if permission is granted, -ve error otherwise.
+ * @key_free:
+ * Notification of destruction; free security data.
+ * @key points to the key.
+ * No return value.
+ * @key_permission:
+ * See whether a specific operational right is granted to a process on a
+ * key.
+ * @key_ref refers to the key (key pointer + possession attribute bit).
+ * @cred points to the credentials to provide the context against which to
+ * evaluate the security data on the key.
+ * @perm describes the combination of permissions required of this key.
+ * Return 0 if permission is granted, -ve error otherwise.
+ * @key_getsecurity:
+ * Get a textual representation of the security context attached to a key
+ * for the purposes of honouring KEYCTL_GETSECURITY. This function
+ * allocates the storage for the NUL-terminated string and the caller
+ * should free it.
+ * @key points to the key to be queried.
+ * @_buffer points to a pointer that should be set to point to the
+ * resulting string (if no label or an error occurs).
+ * Return the length of the string (including terminating NUL) or -ve if
+ * an error.
+ * May also return 0 (and a NULL buffer pointer) if there is no label.
+ *
+ * Security hooks affecting all System V IPC operations.
+ *
+ * @ipc_permission:
+ * Check permissions for access to IPC
+ * @ipcp contains the kernel IPC permission structure
+ * @flag contains the desired (requested) permission set
+ * Return 0 if permission is granted.
+ * @ipc_getsecid:
+ * Get the secid associated with the ipc object.
+ * @ipcp contains the kernel IPC permission structure.
+ * @secid contains a pointer to the location where result will be saved.
+ * In case of failure, @secid will be set to zero.
+ *
+ * Security hooks for individual messages held in System V IPC message queues
+ * @msg_msg_alloc_security:
+ * Allocate and attach a security structure to the msg->security field.
+ * The security field is initialized to NULL when the structure is first
+ * created.
+ * @msg contains the message structure to be modified.
+ * Return 0 if operation was successful and permission is granted.
+ * @msg_msg_free_security:
+ * Deallocate the security structure for this message.
+ * @msg contains the message structure to be modified.
+ *
+ * Security hooks for System V IPC Message Queues
+ *
+ * @msg_queue_alloc_security:
+ * Allocate and attach a security structure to the
+ * msq->q_perm.security field. The security field is initialized to
+ * NULL when the structure is first created.
+ * @msq contains the message queue structure to be modified.
+ * Return 0 if operation was successful and permission is granted.
+ * @msg_queue_free_security:
+ * Deallocate security structure for this message queue.
+ * @msq contains the message queue structure to be modified.
+ * @msg_queue_associate:
+ * Check permission when a message queue is requested through the
+ * msgget system call. This hook is only called when returning the
+ * message queue identifier for an existing message queue, not when a
+ * new message queue is created.
+ * @msq contains the message queue to act upon.
+ * @msqflg contains the operation control flags.
+ * Return 0 if permission is granted.
+ * @msg_queue_msgctl:
+ * Check permission when a message control operation specified by @cmd
+ * is to be performed on the message queue @msq.
+ * The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO.
+ * @msq contains the message queue to act upon. May be NULL.
+ * @cmd contains the operation to be performed.
+ * Return 0 if permission is granted.
+ * @msg_queue_msgsnd:
+ * Check permission before a message, @msg, is enqueued on the message
+ * queue, @msq.
+ * @msq contains the message queue to send message to.
+ * @msg contains the message to be enqueued.
+ * @msqflg contains operational flags.
+ * Return 0 if permission is granted.
+ * @msg_queue_msgrcv:
+ * Check permission before a message, @msg, is removed from the message
+ * queue, @msq. The @target task structure contains a pointer to the
+ * process that will be receiving the message (not equal to the current
+ * process when inline receives are being performed).
+ * @msq contains the message queue to retrieve message from.
+ * @msg contains the message destination.
+ * @target contains the task structure for recipient process.
+ * @type contains the type of message requested.
+ * @mode contains the operational flags.
+ * Return 0 if permission is granted.
+ *
+ * Security hooks for System V Shared Memory Segments
+ *
+ * @shm_alloc_security:
+ * Allocate and attach a security structure to the shp->shm_perm.security
+ * field. The security field is initialized to NULL when the structure is
+ * first created.
+ * @shp contains the shared memory structure to be modified.
+ * Return 0 if operation was successful and permission is granted.
+ * @shm_free_security:
+ * Deallocate the security struct for this memory segment.
+ * @shp contains the shared memory structure to be modified.
+ * @shm_associate:
+ * Check permission when a shared memory region is requested through the
+ * shmget system call. This hook is only called when returning the shared
+ * memory region identifier for an existing region, not when a new shared
+ * memory region is created.
+ * @shp contains the shared memory structure to be modified.
+ * @shmflg contains the operation control flags.
+ * Return 0 if permission is granted.
+ * @shm_shmctl:
+ * Check permission when a shared memory control operation specified by
+ * @cmd is to be performed on the shared memory region @shp.
+ * The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO.
+ * @shp contains shared memory structure to be modified.
+ * @cmd contains the operation to be performed.
+ * Return 0 if permission is granted.
+ * @shm_shmat:
+ * Check permissions prior to allowing the shmat system call to attach the
+ * shared memory segment @shp to the data segment of the calling process.
+ * The attaching address is specified by @shmaddr.
+ * @shp contains the shared memory structure to be modified.
+ * @shmaddr contains the address to attach memory region to.
+ * @shmflg contains the operational flags.
+ * Return 0 if permission is granted.
+ *
+ * Security hooks for System V Semaphores
+ *
+ * @sem_alloc_security:
+ * Allocate and attach a security structure to the sma->sem_perm.security
+ * field. The security field is initialized to NULL when the structure is
+ * first created.
+ * @sma contains the semaphore structure
+ * Return 0 if operation was successful and permission is granted.
+ * @sem_free_security:
+ * deallocate security struct for this semaphore
+ * @sma contains the semaphore structure.
+ * @sem_associate:
+ * Check permission when a semaphore is requested through the semget
+ * system call. This hook is only called when returning the semaphore
+ * identifier for an existing semaphore, not when a new one must be
+ * created.
+ * @sma contains the semaphore structure.
+ * @semflg contains the operation control flags.
+ * Return 0 if permission is granted.
+ * @sem_semctl:
+ * Check permission when a semaphore operation specified by @cmd is to be
+ * performed on the semaphore @sma. The @sma may be NULL, e.g. for
+ * IPC_INFO or SEM_INFO.
+ * @sma contains the semaphore structure. May be NULL.
+ * @cmd contains the operation to be performed.
+ * Return 0 if permission is granted.
+ * @sem_semop
+ * Check permissions before performing operations on members of the
+ * semaphore set @sma. If the @alter flag is nonzero, the semaphore set
+ * may be modified.
+ * @sma contains the semaphore structure.
+ * @sops contains the operations to perform.
+ * @nsops contains the number of operations to perform.
+ * @alter contains the flag indicating whether changes are to be made.
+ * Return 0 if permission is granted.
+ *
+ * @binder_set_context_mgr
+ * Check whether @mgr is allowed to be the binder context manager.
+ * @mgr contains the task_struct for the task being registered.
+ * Return 0 if permission is granted.
+ * @binder_transaction
+ * Check whether @from is allowed to invoke a binder transaction call
+ * to @to.
+ * @from contains the task_struct for the sending task.
+ * @to contains the task_struct for the receiving task.
+ * @binder_transfer_binder
+ * Check whether @from is allowed to transfer a binder reference to @to.
+ * @from contains the task_struct for the sending task.
+ * @to contains the task_struct for the receiving task.
+ * @binder_transfer_file
+ * Check whether @from is allowed to transfer @file to @to.
+ * @from contains the task_struct for the sending task.
+ * @file contains the struct file being transferred.
+ * @to contains the task_struct for the receiving task.
+ *
+ * @ptrace_access_check:
+ * Check permission before allowing the current process to trace the
+ * @child process.
+ * Security modules may also want to perform a process tracing check
+ * during an execve in the set_security or apply_creds hooks of
+ * tracing check during an execve in the bprm_set_creds hook of
+ * binprm_security_ops if the process is being traced and its security
+ * attributes would be changed by the execve.
+ * @child contains the task_struct structure for the target process.
+ * @mode contains the PTRACE_MODE flags indicating the form of access.
+ * Return 0 if permission is granted.
+ * @ptrace_traceme:
+ * Check that the @parent process has sufficient permission to trace the
+ * current process before allowing the current process to present itself
+ * to the @parent process for tracing.
+ * @parent contains the task_struct structure for debugger process.
+ * Return 0 if permission is granted.
+ * @capget:
+ * Get the @effective, @inheritable, and @permitted capability sets for
+ * the @target process. The hook may also perform permission checking to
+ * determine if the current process is allowed to see the capability sets
+ * of the @target process.
+ * @target contains the task_struct structure for target process.
+ * @effective contains the effective capability set.
+ * @inheritable contains the inheritable capability set.
+ * @permitted contains the permitted capability set.
+ * Return 0 if the capability sets were successfully obtained.
+ * @capset:
+ * Set the @effective, @inheritable, and @permitted capability sets for
+ * the current process.
+ * @new contains the new credentials structure for target process.
+ * @old contains the current credentials structure for target process.
+ * @effective contains the effective capability set.
+ * @inheritable contains the inheritable capability set.
+ * @permitted contains the permitted capability set.
+ * Return 0 and update @new if permission is granted.
+ * @capable:
+ * Check whether the @tsk process has the @cap capability in the indicated
+ * credentials.
+ * @cred contains the credentials to use.
+ * @ns contains the user namespace we want the capability in
+ * @cap contains the capability <include/linux/capability.h>.
+ * @audit: Whether to write an audit message or not
+ * Return 0 if the capability is granted for @tsk.
+ * @syslog:
+ * Check permission before accessing the kernel message ring or changing
+ * logging to the console.
+ * See the syslog(2) manual page for an explanation of the @type values.
+ * @type contains the type of action.
+ * @from_file indicates the context of action (if it came from /proc).
+ * Return 0 if permission is granted.
+ * @settime:
+ * Check permission to change the system time.
+ * struct timespec and timezone are defined in include/linux/time.h
+ * @ts contains new time
+ * @tz contains new timezone
+ * Return 0 if permission is granted.
+ * @vm_enough_memory:
+ * Check permissions for allocating a new virtual mapping.
+ * @mm contains the mm struct it is being added to.
+ * @pages contains the number of pages.
+ * Return 0 if permission is granted.
+ *
+ * @ismaclabel:
+ * Check if the extended attribute specified by @name
+ * represents a MAC label. Returns 1 if name is a MAC
+ * attribute otherwise returns 0.
+ * @name full extended attribute name to check against
+ * LSM as a MAC label.
+ *
+ * @secid_to_secctx:
+ * Convert secid to security context. If secdata is NULL the length of
+ * the result will be returned in seclen, but no secdata will be returned.
+ * This does mean that the length could change between calls to check the
+ * length and the next call which actually allocates and returns the
+ * secdata.
+ * @secid contains the security ID.
+ * @secdata contains the pointer that stores the converted security
+ * context.
+ * @seclen pointer which contains the length of the data
+ * @secctx_to_secid:
+ * Convert security context to secid.
+ * @secid contains the pointer to the generated security ID.
+ * @secdata contains the security context.
+ *
+ * @release_secctx:
+ * Release the security context.
+ * @secdata contains the security context.
+ * @seclen contains the length of the security context.
+ *
+ * Security hooks for Audit
+ *
+ * @audit_rule_init:
+ * Allocate and initialize an LSM audit rule structure.
+ * @field contains the required Audit action.
+ * Fields flags are defined in include/linux/audit.h
+ * @op contains the operator the rule uses.
+ * @rulestr contains the context where the rule will be applied to.
+ * @lsmrule contains a pointer to receive the result.
+ * Return 0 if @lsmrule has been successfully set,
+ * -EINVAL in case of an invalid rule.
+ *
+ * @audit_rule_known:
+ * Specifies whether given @rule contains any fields related to
+ * current LSM.
+ * @rule contains the audit rule of interest.
+ * Return 1 in case of relation found, 0 otherwise.
+ *
+ * @audit_rule_match:
+ * Determine if given @secid matches a rule previously approved
+ * by @audit_rule_known.
+ * @secid contains the security id in question.
+ * @field contains the field which relates to current LSM.
+ * @op contains the operator that will be used for matching.
+ * @rule points to the audit rule that will be checked against.
+ * @actx points to the audit context associated with the check.
+ * Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure.
+ *
+ * @audit_rule_free:
+ * Deallocate the LSM audit rule structure previously allocated by
+ * audit_rule_init.
+ * @rule contains the allocated rule
+ *
+ * @inode_notifysecctx:
+ * Notify the security module of what the security context of an inode
+ * should be. Initializes the incore security context managed by the
+ * security module for this inode. Example usage: NFS client invokes
+ * this hook to initialize the security context in its incore inode to the
+ * value provided by the server for the file when the server returned the
+ * file's attributes to the client.
+ *
+ * Must be called with inode->i_mutex locked.
+ *
+ * @inode we wish to set the security context of.
+ * @ctx contains the string which we wish to set in the inode.
+ * @ctxlen contains the length of @ctx.
+ *
+ * @inode_setsecctx:
+ * Change the security context of an inode. Updates the
+ * incore security context managed by the security module and invokes the
+ * fs code as needed (via __vfs_setxattr_noperm) to update any backing
+ * xattrs that represent the context. Example usage: NFS server invokes
+ * this hook to change the security context in its incore inode and on the
+ * backing filesystem to a value provided by the client on a SETATTR
+ * operation.
+ *
+ * Must be called with inode->i_mutex locked.
+ *
+ * @dentry contains the inode we wish to set the security context of.
+ * @ctx contains the string which we wish to set in the inode.
+ * @ctxlen contains the length of @ctx.
+ *
+ * @inode_getsecctx:
+ * On success, returns 0 and fills out @ctx and @ctxlen with the security
+ * context for the given @inode.
+ *
+ * @inode we wish to get the security context of.
+ * @ctx is a pointer in which to place the allocated security context.
+ * @ctxlen points to the place to put the length of @ctx.
+ * This is the main security structure.
+ */
+
+ union security_list_options {
+ int (*binder_set_context_mgr)(struct task_struct *mgr);
+ int (*binder_transaction)(struct task_struct *from,
+ struct task_struct *to);
+ int (*binder_transfer_binder)(struct task_struct *from,
+ struct task_struct *to);
+ int (*binder_transfer_file)(struct task_struct *from,
+ struct task_struct *to,
+ struct file *file);
+
+ int (*ptrace_access_check)(struct task_struct *child,
+ unsigned int mode);
+ int (*ptrace_traceme)(struct task_struct *parent);
+ int (*capget)(struct task_struct *target, kernel_cap_t *effective,
+ kernel_cap_t *inheritable, kernel_cap_t *permitted);
+ int (*capset)(struct cred *new, const struct cred *old,
+ const kernel_cap_t *effective,
+ const kernel_cap_t *inheritable,
+ const kernel_cap_t *permitted);
+ int (*capable)(const struct cred *cred, struct user_namespace *ns,
+ int cap, int audit);
+ int (*quotactl)(int cmds, int type, int id, struct super_block *sb);
+ int (*quota_on)(struct dentry *dentry);
+ int (*syslog)(int type);
+ int (*settime)(const struct timespec *ts, const struct timezone *tz);
+ int (*vm_enough_memory)(struct mm_struct *mm, long pages);
+
+ int (*bprm_set_creds)(struct linux_binprm *bprm);
+ int (*bprm_check_security)(struct linux_binprm *bprm);
+ int (*bprm_secureexec)(struct linux_binprm *bprm);
+ void (*bprm_committing_creds)(struct linux_binprm *bprm);
+ void (*bprm_committed_creds)(struct linux_binprm *bprm);
+
+ int (*sb_alloc_security)(struct super_block *sb);
+ void (*sb_free_security)(struct super_block *sb);
+ int (*sb_copy_data)(char *orig, char *copy);
+ int (*sb_remount)(struct super_block *sb, void *data);
+ int (*sb_kern_mount)(struct super_block *sb, int flags, void *data);
+ int (*sb_show_options)(struct seq_file *m, struct super_block *sb);
+ int (*sb_statfs)(struct dentry *dentry);
+ int (*sb_mount)(const char *dev_name, struct path *path,
+ const char *type, unsigned long flags, void *data);
+ int (*sb_umount)(struct vfsmount *mnt, int flags);
+ int (*sb_pivotroot)(struct path *old_path, struct path *new_path);
+ int (*sb_set_mnt_opts)(struct super_block *sb,
+ struct security_mnt_opts *opts,
+ unsigned long kern_flags,
+ unsigned long *set_kern_flags);
+ int (*sb_clone_mnt_opts)(const struct super_block *oldsb,
+ struct super_block *newsb);
+ int (*sb_parse_opts_str)(char *options, struct security_mnt_opts *opts);
+ int (*dentry_init_security)(struct dentry *dentry, int mode,
+ struct qstr *name, void **ctx,
+ u32 *ctxlen);
+
+
+ #ifdef CONFIG_SECURITY_PATH
+ int (*path_unlink)(struct path *dir, struct dentry *dentry);
+ int (*path_mkdir)(struct path *dir, struct dentry *dentry,
+ umode_t mode);
+ int (*path_rmdir)(struct path *dir, struct dentry *dentry);
+ int (*path_mknod)(struct path *dir, struct dentry *dentry,
+ umode_t mode, unsigned int dev);
+ int (*path_truncate)(struct path *path);
+ int (*path_symlink)(struct path *dir, struct dentry *dentry,
+ const char *old_name);
+ int (*path_link)(struct dentry *old_dentry, struct path *new_dir,
+ struct dentry *new_dentry);
+ int (*path_rename)(struct path *old_dir, struct dentry *old_dentry,
+ struct path *new_dir,
+ struct dentry *new_dentry);
+ int (*path_chmod)(struct path *path, umode_t mode);
+ int (*path_chown)(struct path *path, kuid_t uid, kgid_t gid);
+ int (*path_chroot)(struct path *path);
+ #endif
+
+ int (*inode_alloc_security)(struct inode *inode);
+ void (*inode_free_security)(struct inode *inode);
+ int (*inode_init_security)(struct inode *inode, struct inode *dir,
+ const struct qstr *qstr,
+ const char **name, void **value,
+ size_t *len);
+ int (*inode_create)(struct inode *dir, struct dentry *dentry,
+ umode_t mode);
+ int (*inode_link)(struct dentry *old_dentry, struct inode *dir,
+ struct dentry *new_dentry);
+ int (*inode_unlink)(struct inode *dir, struct dentry *dentry);
+ int (*inode_symlink)(struct inode *dir, struct dentry *dentry,
+ const char *old_name);
+ int (*inode_mkdir)(struct inode *dir, struct dentry *dentry,
+ umode_t mode);
+ int (*inode_rmdir)(struct inode *dir, struct dentry *dentry);
+ int (*inode_mknod)(struct inode *dir, struct dentry *dentry,
+ umode_t mode, dev_t dev);
+ int (*inode_rename)(struct inode *old_dir, struct dentry *old_dentry,
+ struct inode *new_dir,
+ struct dentry *new_dentry);
+ int (*inode_readlink)(struct dentry *dentry);
++ int (*inode_follow_link)(struct dentry *dentry, struct inode *inode,
++ bool rcu);
+ int (*inode_permission)(struct inode *inode, int mask);
+ int (*inode_setattr)(struct dentry *dentry, struct iattr *attr);
+ int (*inode_getattr)(const struct path *path);
+ int (*inode_setxattr)(struct dentry *dentry, const char *name,
+ const void *value, size_t size, int flags);
+ void (*inode_post_setxattr)(struct dentry *dentry, const char *name,
+ const void *value, size_t size,
+ int flags);
+ int (*inode_getxattr)(struct dentry *dentry, const char *name);
+ int (*inode_listxattr)(struct dentry *dentry);
+ int (*inode_removexattr)(struct dentry *dentry, const char *name);
+ int (*inode_need_killpriv)(struct dentry *dentry);
+ int (*inode_killpriv)(struct dentry *dentry);
+ int (*inode_getsecurity)(const struct inode *inode, const char *name,
+ void **buffer, bool alloc);
+ int (*inode_setsecurity)(struct inode *inode, const char *name,
+ const void *value, size_t size,
+ int flags);
+ int (*inode_listsecurity)(struct inode *inode, char *buffer,
+ size_t buffer_size);
+ void (*inode_getsecid)(const struct inode *inode, u32 *secid);
+
+ int (*file_permission)(struct file *file, int mask);
+ int (*file_alloc_security)(struct file *file);
+ void (*file_free_security)(struct file *file);
+ int (*file_ioctl)(struct file *file, unsigned int cmd,
+ unsigned long arg);
+ int (*mmap_addr)(unsigned long addr);
+ int (*mmap_file)(struct file *file, unsigned long reqprot,
+ unsigned long prot, unsigned long flags);
+ int (*file_mprotect)(struct vm_area_struct *vma, unsigned long reqprot,
+ unsigned long prot);
+ int (*file_lock)(struct file *file, unsigned int cmd);
+ int (*file_fcntl)(struct file *file, unsigned int cmd,
+ unsigned long arg);
+ void (*file_set_fowner)(struct file *file);
+ int (*file_send_sigiotask)(struct task_struct *tsk,
+ struct fown_struct *fown, int sig);
+ int (*file_receive)(struct file *file);
+ int (*file_open)(struct file *file, const struct cred *cred);
+
+ int (*task_create)(unsigned long clone_flags);
+ void (*task_free)(struct task_struct *task);
+ int (*cred_alloc_blank)(struct cred *cred, gfp_t gfp);
+ void (*cred_free)(struct cred *cred);
+ int (*cred_prepare)(struct cred *new, const struct cred *old,
+ gfp_t gfp);
+ void (*cred_transfer)(struct cred *new, const struct cred *old);
+ int (*kernel_act_as)(struct cred *new, u32 secid);
+ int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
+ int (*kernel_fw_from_file)(struct file *file, char *buf, size_t size);
+ int (*kernel_module_request)(char *kmod_name);
+ int (*kernel_module_from_file)(struct file *file);
+ int (*task_fix_setuid)(struct cred *new, const struct cred *old,
+ int flags);
+ int (*task_setpgid)(struct task_struct *p, pid_t pgid);
+ int (*task_getpgid)(struct task_struct *p);
+ int (*task_getsid)(struct task_struct *p);
+ void (*task_getsecid)(struct task_struct *p, u32 *secid);
+ int (*task_setnice)(struct task_struct *p, int nice);
+ int (*task_setioprio)(struct task_struct *p, int ioprio);
+ int (*task_getioprio)(struct task_struct *p);
+ int (*task_setrlimit)(struct task_struct *p, unsigned int resource,
+ struct rlimit *new_rlim);
+ int (*task_setscheduler)(struct task_struct *p);
+ int (*task_getscheduler)(struct task_struct *p);
+ int (*task_movememory)(struct task_struct *p);
+ int (*task_kill)(struct task_struct *p, struct siginfo *info,
+ int sig, u32 secid);
+ int (*task_wait)(struct task_struct *p);
+ int (*task_prctl)(int option, unsigned long arg2, unsigned long arg3,
+ unsigned long arg4, unsigned long arg5);
+ void (*task_to_inode)(struct task_struct *p, struct inode *inode);
+
+ int (*ipc_permission)(struct kern_ipc_perm *ipcp, short flag);
+ void (*ipc_getsecid)(struct kern_ipc_perm *ipcp, u32 *secid);
+
+ int (*msg_msg_alloc_security)(struct msg_msg *msg);
+ void (*msg_msg_free_security)(struct msg_msg *msg);
+
+ int (*msg_queue_alloc_security)(struct msg_queue *msq);
+ void (*msg_queue_free_security)(struct msg_queue *msq);
+ int (*msg_queue_associate)(struct msg_queue *msq, int msqflg);
+ int (*msg_queue_msgctl)(struct msg_queue *msq, int cmd);
+ int (*msg_queue_msgsnd)(struct msg_queue *msq, struct msg_msg *msg,
+ int msqflg);
+ int (*msg_queue_msgrcv)(struct msg_queue *msq, struct msg_msg *msg,
+ struct task_struct *target, long type,
+ int mode);
+
+ int (*shm_alloc_security)(struct shmid_kernel *shp);
+ void (*shm_free_security)(struct shmid_kernel *shp);
+ int (*shm_associate)(struct shmid_kernel *shp, int shmflg);
+ int (*shm_shmctl)(struct shmid_kernel *shp, int cmd);
+ int (*shm_shmat)(struct shmid_kernel *shp, char __user *shmaddr,
+ int shmflg);
+
+ int (*sem_alloc_security)(struct sem_array *sma);
+ void (*sem_free_security)(struct sem_array *sma);
+ int (*sem_associate)(struct sem_array *sma, int semflg);
+ int (*sem_semctl)(struct sem_array *sma, int cmd);
+ int (*sem_semop)(struct sem_array *sma, struct sembuf *sops,
+ unsigned nsops, int alter);
+
+ int (*netlink_send)(struct sock *sk, struct sk_buff *skb);
+
+ void (*d_instantiate)(struct dentry *dentry, struct inode *inode);
+
+ int (*getprocattr)(struct task_struct *p, char *name, char **value);
+ int (*setprocattr)(struct task_struct *p, char *name, void *value,
+ size_t size);
+ int (*ismaclabel)(const char *name);
+ int (*secid_to_secctx)(u32 secid, char **secdata, u32 *seclen);
+ int (*secctx_to_secid)(const char *secdata, u32 seclen, u32 *secid);
+ void (*release_secctx)(char *secdata, u32 seclen);
+
+ int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen);
+ int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen);
+ int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen);
+
+ #ifdef CONFIG_SECURITY_NETWORK
+ int (*unix_stream_connect)(struct sock *sock, struct sock *other,
+ struct sock *newsk);
+ int (*unix_may_send)(struct socket *sock, struct socket *other);
+
+ int (*socket_create)(int family, int type, int protocol, int kern);
+ int (*socket_post_create)(struct socket *sock, int family, int type,
+ int protocol, int kern);
+ int (*socket_bind)(struct socket *sock, struct sockaddr *address,
+ int addrlen);
+ int (*socket_connect)(struct socket *sock, struct sockaddr *address,
+ int addrlen);
+ int (*socket_listen)(struct socket *sock, int backlog);
+ int (*socket_accept)(struct socket *sock, struct socket *newsock);
+ int (*socket_sendmsg)(struct socket *sock, struct msghdr *msg,
+ int size);
+ int (*socket_recvmsg)(struct socket *sock, struct msghdr *msg,
+ int size, int flags);
+ int (*socket_getsockname)(struct socket *sock);
+ int (*socket_getpeername)(struct socket *sock);
+ int (*socket_getsockopt)(struct socket *sock, int level, int optname);
+ int (*socket_setsockopt)(struct socket *sock, int level, int optname);
+ int (*socket_shutdown)(struct socket *sock, int how);
+ int (*socket_sock_rcv_skb)(struct sock *sk, struct sk_buff *skb);
+ int (*socket_getpeersec_stream)(struct socket *sock,
+ char __user *optval,
+ int __user *optlen, unsigned len);
+ int (*socket_getpeersec_dgram)(struct socket *sock,
+ struct sk_buff *skb, u32 *secid);
+ int (*sk_alloc_security)(struct sock *sk, int family, gfp_t priority);
+ void (*sk_free_security)(struct sock *sk);
+ void (*sk_clone_security)(const struct sock *sk, struct sock *newsk);
+ void (*sk_getsecid)(struct sock *sk, u32 *secid);
+ void (*sock_graft)(struct sock *sk, struct socket *parent);
+ int (*inet_conn_request)(struct sock *sk, struct sk_buff *skb,
+ struct request_sock *req);
+ void (*inet_csk_clone)(struct sock *newsk,
+ const struct request_sock *req);
+ void (*inet_conn_established)(struct sock *sk, struct sk_buff *skb);
+ int (*secmark_relabel_packet)(u32 secid);
+ void (*secmark_refcount_inc)(void);
+ void (*secmark_refcount_dec)(void);
+ void (*req_classify_flow)(const struct request_sock *req,
+ struct flowi *fl);
+ int (*tun_dev_alloc_security)(void **security);
+ void (*tun_dev_free_security)(void *security);
+ int (*tun_dev_create)(void);
+ int (*tun_dev_attach_queue)(void *security);
+ int (*tun_dev_attach)(struct sock *sk, void *security);
+ int (*tun_dev_open)(void *security);
+ #endif /* CONFIG_SECURITY_NETWORK */
+
+ #ifdef CONFIG_SECURITY_NETWORK_XFRM
+ int (*xfrm_policy_alloc_security)(struct xfrm_sec_ctx **ctxp,
+ struct xfrm_user_sec_ctx *sec_ctx,
+ gfp_t gfp);
+ int (*xfrm_policy_clone_security)(struct xfrm_sec_ctx *old_ctx,
+ struct xfrm_sec_ctx **new_ctx);
+ void (*xfrm_policy_free_security)(struct xfrm_sec_ctx *ctx);
+ int (*xfrm_policy_delete_security)(struct xfrm_sec_ctx *ctx);
+ int (*xfrm_state_alloc)(struct xfrm_state *x,
+ struct xfrm_user_sec_ctx *sec_ctx);
+ int (*xfrm_state_alloc_acquire)(struct xfrm_state *x,
+ struct xfrm_sec_ctx *polsec,
+ u32 secid);
+ void (*xfrm_state_free_security)(struct xfrm_state *x);
+ int (*xfrm_state_delete_security)(struct xfrm_state *x);
+ int (*xfrm_policy_lookup)(struct xfrm_sec_ctx *ctx, u32 fl_secid,
+ u8 dir);
+ int (*xfrm_state_pol_flow_match)(struct xfrm_state *x,
+ struct xfrm_policy *xp,
+ const struct flowi *fl);
+ int (*xfrm_decode_session)(struct sk_buff *skb, u32 *secid, int ckall);
+ #endif /* CONFIG_SECURITY_NETWORK_XFRM */
+
+ /* key management security hooks */
+ #ifdef CONFIG_KEYS
+ int (*key_alloc)(struct key *key, const struct cred *cred,
+ unsigned long flags);
+ void (*key_free)(struct key *key);
+ int (*key_permission)(key_ref_t key_ref, const struct cred *cred,
+ unsigned perm);
+ int (*key_getsecurity)(struct key *key, char **_buffer);
+ #endif /* CONFIG_KEYS */
+
+ #ifdef CONFIG_AUDIT
+ int (*audit_rule_init)(u32 field, u32 op, char *rulestr,
+ void **lsmrule);
+ int (*audit_rule_known)(struct audit_krule *krule);
+ int (*audit_rule_match)(u32 secid, u32 field, u32 op, void *lsmrule,
+ struct audit_context *actx);
+ void (*audit_rule_free)(void *lsmrule);
+ #endif /* CONFIG_AUDIT */
+ };
+
+ struct security_hook_heads {
+ struct list_head binder_set_context_mgr;
+ struct list_head binder_transaction;
+ struct list_head binder_transfer_binder;
+ struct list_head binder_transfer_file;
+ struct list_head ptrace_access_check;
+ struct list_head ptrace_traceme;
+ struct list_head capget;
+ struct list_head capset;
+ struct list_head capable;
+ struct list_head quotactl;
+ struct list_head quota_on;
+ struct list_head syslog;
+ struct list_head settime;
+ struct list_head vm_enough_memory;
+ struct list_head bprm_set_creds;
+ struct list_head bprm_check_security;
+ struct list_head bprm_secureexec;
+ struct list_head bprm_committing_creds;
+ struct list_head bprm_committed_creds;
+ struct list_head sb_alloc_security;
+ struct list_head sb_free_security;
+ struct list_head sb_copy_data;
+ struct list_head sb_remount;
+ struct list_head sb_kern_mount;
+ struct list_head sb_show_options;
+ struct list_head sb_statfs;
+ struct list_head sb_mount;
+ struct list_head sb_umount;
+ struct list_head sb_pivotroot;
+ struct list_head sb_set_mnt_opts;
+ struct list_head sb_clone_mnt_opts;
+ struct list_head sb_parse_opts_str;
+ struct list_head dentry_init_security;
+ #ifdef CONFIG_SECURITY_PATH
+ struct list_head path_unlink;
+ struct list_head path_mkdir;
+ struct list_head path_rmdir;
+ struct list_head path_mknod;
+ struct list_head path_truncate;
+ struct list_head path_symlink;
+ struct list_head path_link;
+ struct list_head path_rename;
+ struct list_head path_chmod;
+ struct list_head path_chown;
+ struct list_head path_chroot;
+ #endif
+ struct list_head inode_alloc_security;
+ struct list_head inode_free_security;
+ struct list_head inode_init_security;
+ struct list_head inode_create;
+ struct list_head inode_link;
+ struct list_head inode_unlink;
+ struct list_head inode_symlink;
+ struct list_head inode_mkdir;
+ struct list_head inode_rmdir;
+ struct list_head inode_mknod;
+ struct list_head inode_rename;
+ struct list_head inode_readlink;
+ struct list_head inode_follow_link;
+ struct list_head inode_permission;
+ struct list_head inode_setattr;
+ struct list_head inode_getattr;
+ struct list_head inode_setxattr;
+ struct list_head inode_post_setxattr;
+ struct list_head inode_getxattr;
+ struct list_head inode_listxattr;
+ struct list_head inode_removexattr;
+ struct list_head inode_need_killpriv;
+ struct list_head inode_killpriv;
+ struct list_head inode_getsecurity;
+ struct list_head inode_setsecurity;
+ struct list_head inode_listsecurity;
+ struct list_head inode_getsecid;
+ struct list_head file_permission;
+ struct list_head file_alloc_security;
+ struct list_head file_free_security;
+ struct list_head file_ioctl;
+ struct list_head mmap_addr;
+ struct list_head mmap_file;
+ struct list_head file_mprotect;
+ struct list_head file_lock;
+ struct list_head file_fcntl;
+ struct list_head file_set_fowner;
+ struct list_head file_send_sigiotask;
+ struct list_head file_receive;
+ struct list_head file_open;
+ struct list_head task_create;
+ struct list_head task_free;
+ struct list_head cred_alloc_blank;
+ struct list_head cred_free;
+ struct list_head cred_prepare;
+ struct list_head cred_transfer;
+ struct list_head kernel_act_as;
+ struct list_head kernel_create_files_as;
+ struct list_head kernel_fw_from_file;
+ struct list_head kernel_module_request;
+ struct list_head kernel_module_from_file;
+ struct list_head task_fix_setuid;
+ struct list_head task_setpgid;
+ struct list_head task_getpgid;
+ struct list_head task_getsid;
+ struct list_head task_getsecid;
+ struct list_head task_setnice;
+ struct list_head task_setioprio;
+ struct list_head task_getioprio;
+ struct list_head task_setrlimit;
+ struct list_head task_setscheduler;
+ struct list_head task_getscheduler;
+ struct list_head task_movememory;
+ struct list_head task_kill;
+ struct list_head task_wait;
+ struct list_head task_prctl;
+ struct list_head task_to_inode;
+ struct list_head ipc_permission;
+ struct list_head ipc_getsecid;
+ struct list_head msg_msg_alloc_security;
+ struct list_head msg_msg_free_security;
+ struct list_head msg_queue_alloc_security;
+ struct list_head msg_queue_free_security;
+ struct list_head msg_queue_associate;
+ struct list_head msg_queue_msgctl;
+ struct list_head msg_queue_msgsnd;
+ struct list_head msg_queue_msgrcv;
+ struct list_head shm_alloc_security;
+ struct list_head shm_free_security;
+ struct list_head shm_associate;
+ struct list_head shm_shmctl;
+ struct list_head shm_shmat;
+ struct list_head sem_alloc_security;
+ struct list_head sem_free_security;
+ struct list_head sem_associate;
+ struct list_head sem_semctl;
+ struct list_head sem_semop;
+ struct list_head netlink_send;
+ struct list_head d_instantiate;
+ struct list_head getprocattr;
+ struct list_head setprocattr;
+ struct list_head ismaclabel;
+ struct list_head secid_to_secctx;
+ struct list_head secctx_to_secid;
+ struct list_head release_secctx;
+ struct list_head inode_notifysecctx;
+ struct list_head inode_setsecctx;
+ struct list_head inode_getsecctx;
+ #ifdef CONFIG_SECURITY_NETWORK
+ struct list_head unix_stream_connect;
+ struct list_head unix_may_send;
+ struct list_head socket_create;
+ struct list_head socket_post_create;
+ struct list_head socket_bind;
+ struct list_head socket_connect;
+ struct list_head socket_listen;
+ struct list_head socket_accept;
+ struct list_head socket_sendmsg;
+ struct list_head socket_recvmsg;
+ struct list_head socket_getsockname;
+ struct list_head socket_getpeername;
+ struct list_head socket_getsockopt;
+ struct list_head socket_setsockopt;
+ struct list_head socket_shutdown;
+ struct list_head socket_sock_rcv_skb;
+ struct list_head socket_getpeersec_stream;
+ struct list_head socket_getpeersec_dgram;
+ struct list_head sk_alloc_security;
+ struct list_head sk_free_security;
+ struct list_head sk_clone_security;
+ struct list_head sk_getsecid;
+ struct list_head sock_graft;
+ struct list_head inet_conn_request;
+ struct list_head inet_csk_clone;
+ struct list_head inet_conn_established;
+ struct list_head secmark_relabel_packet;
+ struct list_head secmark_refcount_inc;
+ struct list_head secmark_refcount_dec;
+ struct list_head req_classify_flow;
+ struct list_head tun_dev_alloc_security;
+ struct list_head tun_dev_free_security;
+ struct list_head tun_dev_create;
+ struct list_head tun_dev_attach_queue;
+ struct list_head tun_dev_attach;
+ struct list_head tun_dev_open;
+ struct list_head skb_owned_by;
+ #endif /* CONFIG_SECURITY_NETWORK */
+ #ifdef CONFIG_SECURITY_NETWORK_XFRM
+ struct list_head xfrm_policy_alloc_security;
+ struct list_head xfrm_policy_clone_security;
+ struct list_head xfrm_policy_free_security;
+ struct list_head xfrm_policy_delete_security;
+ struct list_head xfrm_state_alloc;
+ struct list_head xfrm_state_alloc_acquire;
+ struct list_head xfrm_state_free_security;
+ struct list_head xfrm_state_delete_security;
+ struct list_head xfrm_policy_lookup;
+ struct list_head xfrm_state_pol_flow_match;
+ struct list_head xfrm_decode_session;
+ #endif /* CONFIG_SECURITY_NETWORK_XFRM */
+ #ifdef CONFIG_KEYS
+ struct list_head key_alloc;
+ struct list_head key_free;
+ struct list_head key_permission;
+ struct list_head key_getsecurity;
+ #endif /* CONFIG_KEYS */
+ #ifdef CONFIG_AUDIT
+ struct list_head audit_rule_init;
+ struct list_head audit_rule_known;
+ struct list_head audit_rule_match;
+ struct list_head audit_rule_free;
+ #endif /* CONFIG_AUDIT */
+ };
+
+ /*
+ * Security module hook list structure.
+ * For use with generic list macros for common operations.
+ */
+ struct security_hook_list {
+ struct list_head list;
+ struct list_head *head;
+ union security_list_options hook;
+ };
+
+ /*
+ * Initializing a security_hook_list structure takes
+ * up a lot of space in a source file. This macro takes
+ * care of the common case and reduces the amount of
+ * text involved.
+ */
+ #define LSM_HOOK_INIT(HEAD, HOOK) \
+ { .head = &security_hook_heads.HEAD, .hook = { .HEAD = HOOK } }
+
+ extern struct security_hook_heads security_hook_heads;
+
+ static inline void security_add_hooks(struct security_hook_list *hooks,
+ int count)
+ {
+ int i;
+
+ for (i = 0; i < count; i++)
+ list_add_tail_rcu(&hooks[i].list, hooks[i].head);
+ }
+
+ #ifdef CONFIG_SECURITY_SELINUX_DISABLE
+ /*
+ * Assuring the safety of deleting a security module is up to
+ * the security module involved. This may entail ordering the
+ * module's hook list in a particular way, refusing to disable
+ * the module once a policy is loaded or any number of other
+ * actions better imagined than described.
+ *
+ * The name of the configuration option reflects the only module
+ * that currently uses the mechanism. Any developer who thinks
+ * disabling their module is a good idea needs to be at least as
+ * careful as the SELinux team.
+ */
+ static inline void security_delete_hooks(struct security_hook_list *hooks,
+ int count)
+ {
+ int i;
+
+ for (i = 0; i < count; i++)
+ list_del_rcu(&hooks[i].list);
+ }
+ #endif /* CONFIG_SECURITY_SELINUX_DISABLE */
+
+ extern int __init security_module_enable(const char *module);
+ extern void __init capability_add_hooks(void);
+ #ifdef CONFIG_SECURITY_YAMA_STACKED
+ void __init yama_add_hooks(void);
+ #endif
+
+ #endif /* ! __LINUX_LSM_HOOKS_H */
#include <linux/errno.h>
#include <linux/nodemask.h>
#include <linux/mm_types.h>
-#include <linux/preempt_mask.h>
+#include <linux/preempt.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <linux/uidgid.h>
#include <linux/gfp.h>
#include <linux/magic.h>
+#include <linux/cgroup-defs.h>
#include <asm/processor.h>
struct perf_event_context;
struct blk_plug;
struct filename;
+struct nameidata;
#define VMACACHE_BITS 2
#define VMACACHE_SIZE (1U << VMACACHE_BITS)
extern void get_iowait_load(unsigned long *nr_waiters, unsigned long *load);
extern void calc_global_load(unsigned long ticks);
-extern void update_cpu_load_nohz(void);
-/* Notifier for when a task gets migrated to a new CPU */
-struct task_migration_notifier {
- struct task_struct *task;
- int from_cpu;
- int to_cpu;
-};
-extern void register_task_migration_notifier(struct notifier_block *n);
+#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
+extern void update_cpu_load_nohz(void);
+#else
+static inline void update_cpu_load_nohz(void) { }
+#endif
extern unsigned long get_parent_ip(unsigned long addr);
#define TASK_WAKEKILL 128
#define TASK_WAKING 256
#define TASK_PARKED 512
-#define TASK_STATE_MAX 1024
+#define TASK_NOLOAD 1024
+#define TASK_STATE_MAX 2048
-#define TASK_STATE_TO_CHAR_STR "RSDTtXZxKWP"
+#define TASK_STATE_TO_CHAR_STR "RSDTtXZxKWPN"
extern char ___assert_task_state[1 - 2*!!(
sizeof(TASK_STATE_TO_CHAR_STR)-1 != ilog2(TASK_STATE_MAX)+1)];
#define TASK_STOPPED (TASK_WAKEKILL | __TASK_STOPPED)
#define TASK_TRACED (TASK_WAKEKILL | __TASK_TRACED)
+#define TASK_IDLE (TASK_UNINTERRUPTIBLE | TASK_NOLOAD)
+
/* Convenience macros for the sake of wake_up */
#define TASK_NORMAL (TASK_INTERRUPTIBLE | TASK_UNINTERRUPTIBLE)
#define TASK_ALL (TASK_NORMAL | __TASK_STOPPED | __TASK_TRACED)
((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
#define task_contributes_to_load(task) \
((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
- (task->flags & PF_FROZEN) == 0)
+ (task->flags & PF_FROZEN) == 0 && \
+ (task->state & TASK_NOLOAD) == 0)
#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
#define set_task_state(tsk, state_value) \
do { \
(tsk)->task_state_change = _THIS_IP_; \
- set_mb((tsk)->state, (state_value)); \
+ smp_store_mb((tsk)->state, (state_value)); \
} while (0)
/*
#define set_current_state(state_value) \
do { \
current->task_state_change = _THIS_IP_; \
- set_mb(current->state, (state_value)); \
+ smp_store_mb(current->state, (state_value)); \
} while (0)
#else
#define __set_task_state(tsk, state_value) \
do { (tsk)->state = (state_value); } while (0)
#define set_task_state(tsk, state_value) \
- set_mb((tsk)->state, (state_value))
+ smp_store_mb((tsk)->state, (state_value))
/*
* set_current_state() includes a barrier so that the write of current->state
#define __set_current_state(state_value) \
do { current->state = (state_value); } while (0)
#define set_current_state(state_value) \
- set_mb(current->state, (state_value))
+ smp_store_mb(current->state, (state_value))
#endif
#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
extern void nohz_balance_enter_idle(int cpu);
extern void set_cpu_sd_state_idle(void);
-extern int get_nohz_timer_target(int pinned);
+extern int get_nohz_timer_target(void);
#else
static inline void nohz_balance_enter_idle(int cpu) { }
static inline void set_cpu_sd_state_idle(void) { }
-static inline int get_nohz_timer_target(int pinned)
-{
- return smp_processor_id();
-}
#endif
/*
.sum_exec_runtime = 0, \
}
+/*
+ * This is the atomic variant of task_cputime, which can be used for
+ * storing and updating task_cputime statistics without locking.
+ */
+struct task_cputime_atomic {
+ atomic64_t utime;
+ atomic64_t stime;
+ atomic64_t sum_exec_runtime;
+};
+
+#define INIT_CPUTIME_ATOMIC \
+ (struct task_cputime_atomic) { \
+ .utime = ATOMIC64_INIT(0), \
+ .stime = ATOMIC64_INIT(0), \
+ .sum_exec_runtime = ATOMIC64_INIT(0), \
+ }
+
#ifdef CONFIG_PREEMPT_COUNT
#define PREEMPT_DISABLED (1 + PREEMPT_ENABLED)
#else
/**
* struct thread_group_cputimer - thread group interval timer counts
- * @cputime: thread group interval timers.
+ * @cputime_atomic: atomic thread group interval timers.
* @running: non-zero when there are timers running and
* @cputime receives updates.
- * @lock: lock for fields in this struct.
*
* This structure contains the version of task_cputime, above, that is
* used for thread group CPU timer calculations.
*/
struct thread_group_cputimer {
- struct task_cputime cputime;
+ struct task_cputime_atomic cputime_atomic;
int running;
- raw_spinlock_t lock;
};
#include <linux/rwsem.h>
unsigned audit_tty_log_passwd;
struct tty_audit_buf *tty_audit_buf;
#endif
-#ifdef CONFIG_CGROUPS
- /*
- * group_rwsem prevents new tasks from entering the threadgroup and
- * member tasks from exiting,a more specifically, setting of
- * PF_EXITING. fork and exit paths are protected with this rwsem
- * using threadgroup_change_begin/end(). Users which require
- * threadgroup to remain stable should use threadgroup_[un]lock()
- * which also takes care of exec path. Currently, cgroup is the
- * only user.
- */
- struct rw_semaphore group_rwsem;
-#endif
oom_flags_t oom_flags;
short oom_score_adj; /* OOM kill score adjustment */
#define SCHED_CAPACITY_SHIFT 10
#define SCHED_CAPACITY_SCALE (1L << SCHED_CAPACITY_SHIFT)
+/*
+ * Wake-queues are lists of tasks with a pending wakeup, whose
+ * callers have already marked the task as woken internally,
+ * and can thus carry on. A common use case is being able to
+ * do the wakeups once the corresponding user lock as been
+ * released.
+ *
+ * We hold reference to each task in the list across the wakeup,
+ * thus guaranteeing that the memory is still valid by the time
+ * the actual wakeups are performed in wake_up_q().
+ *
+ * One per task suffices, because there's never a need for a task to be
+ * in two wake queues simultaneously; it is forbidden to abandon a task
+ * in a wake queue (a call to wake_up_q() _must_ follow), so if a task is
+ * already in a wake queue, the wakeup will happen soon and the second
+ * waker can just skip it.
+ *
+ * The WAKE_Q macro declares and initializes the list head.
+ * wake_up_q() does NOT reinitialize the list; it's expected to be
+ * called near the end of a function, where the fact that the queue is
+ * not used again will be easy to see by inspection.
+ *
+ * Note that this can cause spurious wakeups. schedule() callers
+ * must ensure the call is done inside a loop, confirming that the
+ * wakeup condition has in fact occurred.
+ */
+struct wake_q_node {
+ struct wake_q_node *next;
+};
+
+struct wake_q_head {
+ struct wake_q_node *first;
+ struct wake_q_node **lastp;
+};
+
+#define WAKE_Q_TAIL ((struct wake_q_node *) 0x01)
+
+#define WAKE_Q(name) \
+ struct wake_q_head name = { WAKE_Q_TAIL, &name.first }
+
+extern void wake_q_add(struct wake_q_head *head,
+ struct task_struct *task);
+extern void wake_up_q(struct wake_q_head *head);
+
/*
* sched-domains (multiprocessor balancing) declarations:
*/
int rcu_read_lock_nesting;
union rcu_special rcu_read_unlock_special;
struct list_head rcu_node_entry;
-#endif /* #ifdef CONFIG_PREEMPT_RCU */
-#ifdef CONFIG_PREEMPT_RCU
struct rcu_node *rcu_blocked_node;
#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_TASKS_RCU
#endif
struct mm_struct *mm, *active_mm;
-#ifdef CONFIG_COMPAT_BRK
- unsigned brk_randomized:1;
-#endif
/* per-thread vma caching */
u32 vmacache_seqnum;
struct vm_area_struct *vmacache[VMACACHE_SIZE];
int exit_state;
int exit_code, exit_signal;
int pdeath_signal; /* The signal sent when the parent dies */
- unsigned int jobctl; /* JOBCTL_*, siglock protected */
+ unsigned long jobctl; /* JOBCTL_*, siglock protected */
/* Used for emulating ABI behavior of previous Linux versions */
unsigned int personality;
/* Revert to default priority/policy when forking */
unsigned sched_reset_on_fork:1;
unsigned sched_contributes_to_load:1;
+ unsigned sched_migrated:1;
#ifdef CONFIG_MEMCG_KMEM
unsigned memcg_kmem_skip_account:1;
#endif
+#ifdef CONFIG_COMPAT_BRK
+ unsigned brk_randomized:1;
+#endif
unsigned long atomic_flags; /* Flags needing atomic access. */
it with task_lock())
- initialized normally by setup_new_exec */
/* file system info */
- int link_count, total_link_count;
+ struct nameidata *nameidata;
#ifdef CONFIG_SYSVIPC
/* ipc stuff */
struct sysv_sem sysvsem;
/* Protection of the PI data structures: */
raw_spinlock_t pi_lock;
+ struct wake_q_node wake_q;
+
#ifdef CONFIG_RT_MUTEXES
/* PI waiters blocked on a rt_mutex held by this task */
struct rb_root pi_waiters;
#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
unsigned long task_state_change;
#endif
+ int pagefault_disabled;
};
/* Future-safe accessor for struct task_struct's cpus_allowed. */
#define JOBCTL_TRAPPING_BIT 21 /* switching to TRACED */
#define JOBCTL_LISTENING_BIT 22 /* ptracer is listening for events */
-#define JOBCTL_STOP_DEQUEUED (1 << JOBCTL_STOP_DEQUEUED_BIT)
-#define JOBCTL_STOP_PENDING (1 << JOBCTL_STOP_PENDING_BIT)
-#define JOBCTL_STOP_CONSUME (1 << JOBCTL_STOP_CONSUME_BIT)
-#define JOBCTL_TRAP_STOP (1 << JOBCTL_TRAP_STOP_BIT)
-#define JOBCTL_TRAP_NOTIFY (1 << JOBCTL_TRAP_NOTIFY_BIT)
-#define JOBCTL_TRAPPING (1 << JOBCTL_TRAPPING_BIT)
-#define JOBCTL_LISTENING (1 << JOBCTL_LISTENING_BIT)
+#define JOBCTL_STOP_DEQUEUED (1UL << JOBCTL_STOP_DEQUEUED_BIT)
+#define JOBCTL_STOP_PENDING (1UL << JOBCTL_STOP_PENDING_BIT)
+#define JOBCTL_STOP_CONSUME (1UL << JOBCTL_STOP_CONSUME_BIT)
+#define JOBCTL_TRAP_STOP (1UL << JOBCTL_TRAP_STOP_BIT)
+#define JOBCTL_TRAP_NOTIFY (1UL << JOBCTL_TRAP_NOTIFY_BIT)
+#define JOBCTL_TRAPPING (1UL << JOBCTL_TRAPPING_BIT)
+#define JOBCTL_LISTENING (1UL << JOBCTL_LISTENING_BIT)
#define JOBCTL_TRAP_MASK (JOBCTL_TRAP_STOP | JOBCTL_TRAP_NOTIFY)
#define JOBCTL_PENDING_MASK (JOBCTL_STOP_PENDING | JOBCTL_TRAP_MASK)
extern bool task_set_jobctl_pending(struct task_struct *task,
- unsigned int mask);
+ unsigned long mask);
extern void task_clear_jobctl_trapping(struct task_struct *task);
extern void task_clear_jobctl_pending(struct task_struct *task,
- unsigned int mask);
+ unsigned long mask);
static inline void rcu_copy_process(struct task_struct *p)
{
extern void proc_caches_init(void);
extern void flush_signals(struct task_struct *);
- extern void __flush_signals(struct task_struct *);
extern void ignore_signals(struct task_struct *);
extern void flush_signal_handlers(struct task_struct *, int force_default);
extern int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info);
/* Remove the current tasks stale references to the old mm_struct */
extern void mm_release(struct task_struct *, struct mm_struct *);
+#ifdef CONFIG_HAVE_COPY_THREAD_TLS
+extern int copy_thread_tls(unsigned long, unsigned long, unsigned long,
+ struct task_struct *, unsigned long);
+#else
extern int copy_thread(unsigned long, unsigned long, unsigned long,
struct task_struct *);
+
+/* Architectures that haven't opted into copy_thread_tls get the tls argument
+ * via pt_regs, so ignore the tls argument passed via C. */
+static inline int copy_thread_tls(
+ unsigned long clone_flags, unsigned long sp, unsigned long arg,
+ struct task_struct *p, unsigned long tls)
+{
+ return copy_thread(clone_flags, sp, arg, p);
+}
+#endif
extern void flush_thread(void);
extern void exit_thread(void);
const char __user * const __user *,
const char __user * const __user *,
int);
+extern long _do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *, unsigned long);
extern long do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *);
struct task_struct *fork_idle(int);
extern pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
}
#endif
+#define tasklist_empty() \
+ list_empty(&init_task.tasks)
+
#define next_task(p) \
list_entry_rcu((p)->tasks.next, struct task_struct, tasks)
spin_unlock_irqrestore(&tsk->sighand->siglock, *flags);
}
-#ifdef CONFIG_CGROUPS
-static inline void threadgroup_change_begin(struct task_struct *tsk)
-{
- down_read(&tsk->signal->group_rwsem);
-}
-static inline void threadgroup_change_end(struct task_struct *tsk)
-{
- up_read(&tsk->signal->group_rwsem);
-}
-
/**
- * threadgroup_lock - lock threadgroup
- * @tsk: member task of the threadgroup to lock
- *
- * Lock the threadgroup @tsk belongs to. No new task is allowed to enter
- * and member tasks aren't allowed to exit (as indicated by PF_EXITING) or
- * change ->group_leader/pid. This is useful for cases where the threadgroup
- * needs to stay stable across blockable operations.
+ * threadgroup_change_begin - mark the beginning of changes to a threadgroup
+ * @tsk: task causing the changes
*
- * fork and exit paths explicitly call threadgroup_change_{begin|end}() for
- * synchronization. While held, no new task will be added to threadgroup
- * and no existing live task will have its PF_EXITING set.
- *
- * de_thread() does threadgroup_change_{begin|end}() when a non-leader
- * sub-thread becomes a new leader.
+ * All operations which modify a threadgroup - a new thread joining the
+ * group, death of a member thread (the assertion of PF_EXITING) and
+ * exec(2) dethreading the process and replacing the leader - are wrapped
+ * by threadgroup_change_{begin|end}(). This is to provide a place which
+ * subsystems needing threadgroup stability can hook into for
+ * synchronization.
*/
-static inline void threadgroup_lock(struct task_struct *tsk)
+static inline void threadgroup_change_begin(struct task_struct *tsk)
{
- down_write(&tsk->signal->group_rwsem);
+ might_sleep();
+ cgroup_threadgroup_change_begin(tsk);
}
/**
- * threadgroup_unlock - unlock threadgroup
- * @tsk: member task of the threadgroup to unlock
+ * threadgroup_change_end - mark the end of changes to a threadgroup
+ * @tsk: task causing the changes
*
- * Reverse threadgroup_lock().
+ * See threadgroup_change_begin().
*/
-static inline void threadgroup_unlock(struct task_struct *tsk)
+static inline void threadgroup_change_end(struct task_struct *tsk)
{
- up_write(&tsk->signal->group_rwsem);
+ cgroup_threadgroup_change_end(tsk);
}
-#else
-static inline void threadgroup_change_begin(struct task_struct *tsk) {}
-static inline void threadgroup_change_end(struct task_struct *tsk) {}
-static inline void threadgroup_lock(struct task_struct *tsk) {}
-static inline void threadgroup_unlock(struct task_struct *tsk) {}
-#endif
#ifndef __HAVE_THREAD_FUNCTIONS
void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times);
void thread_group_cputimer(struct task_struct *tsk, struct task_cputime *times);
-static inline void thread_group_cputime_init(struct signal_struct *sig)
-{
- raw_spin_lock_init(&sig->cputimer.lock);
-}
-
/*
* Reevaluate whether the task has signals pending delivery.
* Wake the task if so.
static inline unsigned long task_rlimit(const struct task_struct *tsk,
unsigned int limit)
{
- return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_cur);
+ return READ_ONCE(tsk->signal->rlim[limit].rlim_cur);
}
static inline unsigned long task_rlimit_max(const struct task_struct *tsk,
unsigned int limit)
{
- return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_max);
+ return READ_ONCE(tsk->signal->rlim[limit].rlim_max);
}
static inline unsigned long rlimit(unsigned int limit)
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/string.h>
+ #include <linux/mm.h>
struct linux_binprm;
struct cred;
struct vfsmount;
struct path;
struct qstr;
-struct nameidata;
struct iattr;
struct fown_struct;
struct file_operations;
struct xfrm_sec_ctx;
struct mm_struct;
- /* Maximum number of letters for an LSM name string */
- #define SECURITY_NAME_MAX 10
-
/* If capable should audit the security request */
#define SECURITY_CAP_NOAUDIT 0
#define SECURITY_CAP_AUDIT 1
struct user_namespace;
struct timezone;
- /*
- * These functions are in security/capability.c and are used
- * as the default capabilities functions
- */
+ /* These functions are in security/commoncap.c */
extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
int cap, int audit);
extern int cap_settime(const struct timespec *ts, const struct timezone *tz);
struct xfrm_user_sec_ctx;
struct seq_file;
- extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb);
-
- void reset_security_ops(void);
-
#ifdef CONFIG_MMU
extern unsigned long mmap_min_addr;
extern unsigned long dac_mmap_min_addr;
opts->num_mnt_opts = 0;
}
- /**
- * struct security_operations - main security structure
- *
- * Security module identifier.
- *
- * @name:
- * A string that acts as a unique identifier for the LSM with max number
- * of characters = SECURITY_NAME_MAX.
- *
- * Security hooks for program execution operations.
- *
- * @bprm_set_creds:
- * Save security information in the bprm->security field, typically based
- * on information about the bprm->file, for later use by the apply_creds
- * hook. This hook may also optionally check permissions (e.g. for
- * transitions between security domains).
- * This hook may be called multiple times during a single execve, e.g. for
- * interpreters. The hook can tell whether it has already been called by
- * checking to see if @bprm->security is non-NULL. If so, then the hook
- * may decide either to retain the security information saved earlier or
- * to replace it.
- * @bprm contains the linux_binprm structure.
- * Return 0 if the hook is successful and permission is granted.
- * @bprm_check_security:
- * This hook mediates the point when a search for a binary handler will
- * begin. It allows a check the @bprm->security value which is set in the
- * preceding set_creds call. The primary difference from set_creds is
- * that the argv list and envp list are reliably available in @bprm. This
- * hook may be called multiple times during a single execve; and in each
- * pass set_creds is called first.
- * @bprm contains the linux_binprm structure.
- * Return 0 if the hook is successful and permission is granted.
- * @bprm_committing_creds:
- * Prepare to install the new security attributes of a process being
- * transformed by an execve operation, based on the old credentials
- * pointed to by @current->cred and the information set in @bprm->cred by
- * the bprm_set_creds hook. @bprm points to the linux_binprm structure.
- * This hook is a good place to perform state changes on the process such
- * as closing open file descriptors to which access will no longer be
- * granted when the attributes are changed. This is called immediately
- * before commit_creds().
- * @bprm_committed_creds:
- * Tidy up after the installation of the new security attributes of a
- * process being transformed by an execve operation. The new credentials
- * have, by this point, been set to @current->cred. @bprm points to the
- * linux_binprm structure. This hook is a good place to perform state
- * changes on the process such as clearing out non-inheritable signal
- * state. This is called immediately after commit_creds().
- * @bprm_secureexec:
- * Return a boolean value (0 or 1) indicating whether a "secure exec"
- * is required. The flag is passed in the auxiliary table
- * on the initial stack to the ELF interpreter to indicate whether libc
- * should enable secure mode.
- * @bprm contains the linux_binprm structure.
- *
- * Security hooks for filesystem operations.
- *
- * @sb_alloc_security:
- * Allocate and attach a security structure to the sb->s_security field.
- * The s_security field is initialized to NULL when the structure is
- * allocated.
- * @sb contains the super_block structure to be modified.
- * Return 0 if operation was successful.
- * @sb_free_security:
- * Deallocate and clear the sb->s_security field.
- * @sb contains the super_block structure to be modified.
- * @sb_statfs:
- * Check permission before obtaining filesystem statistics for the @mnt
- * mountpoint.
- * @dentry is a handle on the superblock for the filesystem.
- * Return 0 if permission is granted.
- * @sb_mount:
- * Check permission before an object specified by @dev_name is mounted on
- * the mount point named by @nd. For an ordinary mount, @dev_name
- * identifies a device if the file system type requires a device. For a
- * remount (@flags & MS_REMOUNT), @dev_name is irrelevant. For a
- * loopback/bind mount (@flags & MS_BIND), @dev_name identifies the
- * pathname of the object being mounted.
- * @dev_name contains the name for object being mounted.
- * @path contains the path for mount point object.
- * @type contains the filesystem type.
- * @flags contains the mount flags.
- * @data contains the filesystem-specific data.
- * Return 0 if permission is granted.
- * @sb_copy_data:
- * Allow mount option data to be copied prior to parsing by the filesystem,
- * so that the security module can extract security-specific mount
- * options cleanly (a filesystem may modify the data e.g. with strsep()).
- * This also allows the original mount data to be stripped of security-
- * specific options to avoid having to make filesystems aware of them.
- * @type the type of filesystem being mounted.
- * @orig the original mount data copied from userspace.
- * @copy copied data which will be passed to the security module.
- * Returns 0 if the copy was successful.
- * @sb_remount:
- * Extracts security system specific mount options and verifies no changes
- * are being made to those options.
- * @sb superblock being remounted
- * @data contains the filesystem-specific data.
- * Return 0 if permission is granted.
- * @sb_umount:
- * Check permission before the @mnt file system is unmounted.
- * @mnt contains the mounted file system.
- * @flags contains the unmount flags, e.g. MNT_FORCE.
- * Return 0 if permission is granted.
- * @sb_pivotroot:
- * Check permission before pivoting the root filesystem.
- * @old_path contains the path for the new location of the current root (put_old).
- * @new_path contains the path for the new root (new_root).
- * Return 0 if permission is granted.
- * @sb_set_mnt_opts:
- * Set the security relevant mount options used for a superblock
- * @sb the superblock to set security mount options for
- * @opts binary data structure containing all lsm mount data
- * @sb_clone_mnt_opts:
- * Copy all security options from a given superblock to another
- * @oldsb old superblock which contain information to clone
- * @newsb new superblock which needs filled in
- * @sb_parse_opts_str:
- * Parse a string of security data filling in the opts structure
- * @options string containing all mount options known by the LSM
- * @opts binary data structure usable by the LSM
- * @dentry_init_security:
- * Compute a context for a dentry as the inode is not yet available
- * since NFSv4 has no label backed by an EA anyway.
- * @dentry dentry to use in calculating the context.
- * @mode mode used to determine resource type.
- * @name name of the last path component used to create file
- * @ctx pointer to place the pointer to the resulting context in.
- * @ctxlen point to place the length of the resulting context.
- *
- *
- * Security hooks for inode operations.
- *
- * @inode_alloc_security:
- * Allocate and attach a security structure to @inode->i_security. The
- * i_security field is initialized to NULL when the inode structure is
- * allocated.
- * @inode contains the inode structure.
- * Return 0 if operation was successful.
- * @inode_free_security:
- * @inode contains the inode structure.
- * Deallocate the inode security structure and set @inode->i_security to
- * NULL.
- * @inode_init_security:
- * Obtain the security attribute name suffix and value to set on a newly
- * created inode and set up the incore security field for the new inode.
- * This hook is called by the fs code as part of the inode creation
- * transaction and provides for atomic labeling of the inode, unlike
- * the post_create/mkdir/... hooks called by the VFS. The hook function
- * is expected to allocate the name and value via kmalloc, with the caller
- * being responsible for calling kfree after using them.
- * If the security module does not use security attributes or does
- * not wish to put a security attribute on this particular inode,
- * then it should return -EOPNOTSUPP to skip this processing.
- * @inode contains the inode structure of the newly created inode.
- * @dir contains the inode structure of the parent directory.
- * @qstr contains the last path component of the new object
- * @name will be set to the allocated name suffix (e.g. selinux).
- * @value will be set to the allocated attribute value.
- * @len will be set to the length of the value.
- * Returns 0 if @name and @value have been successfully set,
- * -EOPNOTSUPP if no security attribute is needed, or
- * -ENOMEM on memory allocation failure.
- * @inode_create:
- * Check permission to create a regular file.
- * @dir contains inode structure of the parent of the new file.
- * @dentry contains the dentry structure for the file to be created.
- * @mode contains the file mode of the file to be created.
- * Return 0 if permission is granted.
- * @inode_link:
- * Check permission before creating a new hard link to a file.
- * @old_dentry contains the dentry structure for an existing link to the file.
- * @dir contains the inode structure of the parent directory of the new link.
- * @new_dentry contains the dentry structure for the new link.
- * Return 0 if permission is granted.
- * @path_link:
- * Check permission before creating a new hard link to a file.
- * @old_dentry contains the dentry structure for an existing link
- * to the file.
- * @new_dir contains the path structure of the parent directory of
- * the new link.
- * @new_dentry contains the dentry structure for the new link.
- * Return 0 if permission is granted.
- * @inode_unlink:
- * Check the permission to remove a hard link to a file.
- * @dir contains the inode structure of parent directory of the file.
- * @dentry contains the dentry structure for file to be unlinked.
- * Return 0 if permission is granted.
- * @path_unlink:
- * Check the permission to remove a hard link to a file.
- * @dir contains the path structure of parent directory of the file.
- * @dentry contains the dentry structure for file to be unlinked.
- * Return 0 if permission is granted.
- * @inode_symlink:
- * Check the permission to create a symbolic link to a file.
- * @dir contains the inode structure of parent directory of the symbolic link.
- * @dentry contains the dentry structure of the symbolic link.
- * @old_name contains the pathname of file.
- * Return 0 if permission is granted.
- * @path_symlink:
- * Check the permission to create a symbolic link to a file.
- * @dir contains the path structure of parent directory of
- * the symbolic link.
- * @dentry contains the dentry structure of the symbolic link.
- * @old_name contains the pathname of file.
- * Return 0 if permission is granted.
- * @inode_mkdir:
- * Check permissions to create a new directory in the existing directory
- * associated with inode structure @dir.
- * @dir contains the inode structure of parent of the directory to be created.
- * @dentry contains the dentry structure of new directory.
- * @mode contains the mode of new directory.
- * Return 0 if permission is granted.
- * @path_mkdir:
- * Check permissions to create a new directory in the existing directory
- * associated with path structure @path.
- * @dir contains the path structure of parent of the directory
- * to be created.
- * @dentry contains the dentry structure of new directory.
- * @mode contains the mode of new directory.
- * Return 0 if permission is granted.
- * @inode_rmdir:
- * Check the permission to remove a directory.
- * @dir contains the inode structure of parent of the directory to be removed.
- * @dentry contains the dentry structure of directory to be removed.
- * Return 0 if permission is granted.
- * @path_rmdir:
- * Check the permission to remove a directory.
- * @dir contains the path structure of parent of the directory to be
- * removed.
- * @dentry contains the dentry structure of directory to be removed.
- * Return 0 if permission is granted.
- * @inode_mknod:
- * Check permissions when creating a special file (or a socket or a fifo
- * file created via the mknod system call). Note that if mknod operation
- * is being done for a regular file, then the create hook will be called
- * and not this hook.
- * @dir contains the inode structure of parent of the new file.
- * @dentry contains the dentry structure of the new file.
- * @mode contains the mode of the new file.
- * @dev contains the device number.
- * Return 0 if permission is granted.
- * @path_mknod:
- * Check permissions when creating a file. Note that this hook is called
- * even if mknod operation is being done for a regular file.
- * @dir contains the path structure of parent of the new file.
- * @dentry contains the dentry structure of the new file.
- * @mode contains the mode of the new file.
- * @dev contains the undecoded device number. Use new_decode_dev() to get
- * the decoded device number.
- * Return 0 if permission is granted.
- * @inode_rename:
- * Check for permission to rename a file or directory.
- * @old_dir contains the inode structure for parent of the old link.
- * @old_dentry contains the dentry structure of the old link.
- * @new_dir contains the inode structure for parent of the new link.
- * @new_dentry contains the dentry structure of the new link.
- * Return 0 if permission is granted.
- * @path_rename:
- * Check for permission to rename a file or directory.
- * @old_dir contains the path structure for parent of the old link.
- * @old_dentry contains the dentry structure of the old link.
- * @new_dir contains the path structure for parent of the new link.
- * @new_dentry contains the dentry structure of the new link.
- * Return 0 if permission is granted.
- * @path_chmod:
- * Check for permission to change DAC's permission of a file or directory.
- * @dentry contains the dentry structure.
- * @mnt contains the vfsmnt structure.
- * @mode contains DAC's mode.
- * Return 0 if permission is granted.
- * @path_chown:
- * Check for permission to change owner/group of a file or directory.
- * @path contains the path structure.
- * @uid contains new owner's ID.
- * @gid contains new group's ID.
- * Return 0 if permission is granted.
- * @path_chroot:
- * Check for permission to change root directory.
- * @path contains the path structure.
- * Return 0 if permission is granted.
- * @inode_readlink:
- * Check the permission to read the symbolic link.
- * @dentry contains the dentry structure for the file link.
- * Return 0 if permission is granted.
- * @inode_follow_link:
- * Check permission to follow a symbolic link when looking up a pathname.
- * @dentry contains the dentry structure for the link.
- * @inode contains the inode, which itself is not stable in RCU-walk
- * @rcu indicates whether we are in RCU-walk mode.
- * Return 0 if permission is granted.
- * @inode_permission:
- * Check permission before accessing an inode. This hook is called by the
- * existing Linux permission function, so a security module can use it to
- * provide additional checking for existing Linux permission checks.
- * Notice that this hook is called when a file is opened (as well as many
- * other operations), whereas the file_security_ops permission hook is
- * called when the actual read/write operations are performed.
- * @inode contains the inode structure to check.
- * @mask contains the permission mask.
- * Return 0 if permission is granted.
- * @inode_setattr:
- * Check permission before setting file attributes. Note that the kernel
- * call to notify_change is performed from several locations, whenever
- * file attributes change (such as when a file is truncated, chown/chmod
- * operations, transferring disk quotas, etc).
- * @dentry contains the dentry structure for the file.
- * @attr is the iattr structure containing the new file attributes.
- * Return 0 if permission is granted.
- * @path_truncate:
- * Check permission before truncating a file.
- * @path contains the path structure for the file.
- * Return 0 if permission is granted.
- * @inode_getattr:
- * Check permission before obtaining file attributes.
- * @mnt is the vfsmount where the dentry was looked up
- * @dentry contains the dentry structure for the file.
- * Return 0 if permission is granted.
- * @inode_setxattr:
- * Check permission before setting the extended attributes
- * @value identified by @name for @dentry.
- * Return 0 if permission is granted.
- * @inode_post_setxattr:
- * Update inode security field after successful setxattr operation.
- * @value identified by @name for @dentry.
- * @inode_getxattr:
- * Check permission before obtaining the extended attributes
- * identified by @name for @dentry.
- * Return 0 if permission is granted.
- * @inode_listxattr:
- * Check permission before obtaining the list of extended attribute
- * names for @dentry.
- * Return 0 if permission is granted.
- * @inode_removexattr:
- * Check permission before removing the extended attribute
- * identified by @name for @dentry.
- * Return 0 if permission is granted.
- * @inode_getsecurity:
- * Retrieve a copy of the extended attribute representation of the
- * security label associated with @name for @inode via @buffer. Note that
- * @name is the remainder of the attribute name after the security prefix
- * has been removed. @alloc is used to specify of the call should return a
- * value via the buffer or just the value length Return size of buffer on
- * success.
- * @inode_setsecurity:
- * Set the security label associated with @name for @inode from the
- * extended attribute value @value. @size indicates the size of the
- * @value in bytes. @flags may be XATTR_CREATE, XATTR_REPLACE, or 0.
- * Note that @name is the remainder of the attribute name after the
- * security. prefix has been removed.
- * Return 0 on success.
- * @inode_listsecurity:
- * Copy the extended attribute names for the security labels
- * associated with @inode into @buffer. The maximum size of @buffer
- * is specified by @buffer_size. @buffer may be NULL to request
- * the size of the buffer required.
- * Returns number of bytes used/required on success.
- * @inode_need_killpriv:
- * Called when an inode has been changed.
- * @dentry is the dentry being changed.
- * Return <0 on error to abort the inode change operation.
- * Return 0 if inode_killpriv does not need to be called.
- * Return >0 if inode_killpriv does need to be called.
- * @inode_killpriv:
- * The setuid bit is being removed. Remove similar security labels.
- * Called with the dentry->d_inode->i_mutex held.
- * @dentry is the dentry being changed.
- * Return 0 on success. If error is returned, then the operation
- * causing setuid bit removal is failed.
- * @inode_getsecid:
- * Get the secid associated with the node.
- * @inode contains a pointer to the inode.
- * @secid contains a pointer to the location where result will be saved.
- * In case of failure, @secid will be set to zero.
- *
- * Security hooks for file operations
- *
- * @file_permission:
- * Check file permissions before accessing an open file. This hook is
- * called by various operations that read or write files. A security
- * module can use this hook to perform additional checking on these
- * operations, e.g. to revalidate permissions on use to support privilege
- * bracketing or policy changes. Notice that this hook is used when the
- * actual read/write operations are performed, whereas the
- * inode_security_ops hook is called when a file is opened (as well as
- * many other operations).
- * Caveat: Although this hook can be used to revalidate permissions for
- * various system call operations that read or write files, it does not
- * address the revalidation of permissions for memory-mapped files.
- * Security modules must handle this separately if they need such
- * revalidation.
- * @file contains the file structure being accessed.
- * @mask contains the requested permissions.
- * Return 0 if permission is granted.
- * @file_alloc_security:
- * Allocate and attach a security structure to the file->f_security field.
- * The security field is initialized to NULL when the structure is first
- * created.
- * @file contains the file structure to secure.
- * Return 0 if the hook is successful and permission is granted.
- * @file_free_security:
- * Deallocate and free any security structures stored in file->f_security.
- * @file contains the file structure being modified.
- * @file_ioctl:
- * @file contains the file structure.
- * @cmd contains the operation to perform.
- * @arg contains the operational arguments.
- * Check permission for an ioctl operation on @file. Note that @arg
- * sometimes represents a user space pointer; in other cases, it may be a
- * simple integer value. When @arg represents a user space pointer, it
- * should never be used by the security module.
- * Return 0 if permission is granted.
- * @mmap_addr :
- * Check permissions for a mmap operation at @addr.
- * @addr contains virtual address that will be used for the operation.
- * Return 0 if permission is granted.
- * @mmap_file :
- * Check permissions for a mmap operation. The @file may be NULL, e.g.
- * if mapping anonymous memory.
- * @file contains the file structure for file to map (may be NULL).
- * @reqprot contains the protection requested by the application.
- * @prot contains the protection that will be applied by the kernel.
- * @flags contains the operational flags.
- * Return 0 if permission is granted.
- * @file_mprotect:
- * Check permissions before changing memory access permissions.
- * @vma contains the memory region to modify.
- * @reqprot contains the protection requested by the application.
- * @prot contains the protection that will be applied by the kernel.
- * Return 0 if permission is granted.
- * @file_lock:
- * Check permission before performing file locking operations.
- * Note: this hook mediates both flock and fcntl style locks.
- * @file contains the file structure.
- * @cmd contains the posix-translated lock operation to perform
- * (e.g. F_RDLCK, F_WRLCK).
- * Return 0 if permission is granted.
- * @file_fcntl:
- * Check permission before allowing the file operation specified by @cmd
- * from being performed on the file @file. Note that @arg sometimes
- * represents a user space pointer; in other cases, it may be a simple
- * integer value. When @arg represents a user space pointer, it should
- * never be used by the security module.
- * @file contains the file structure.
- * @cmd contains the operation to be performed.
- * @arg contains the operational arguments.
- * Return 0 if permission is granted.
- * @file_set_fowner:
- * Save owner security information (typically from current->security) in
- * file->f_security for later use by the send_sigiotask hook.
- * @file contains the file structure to update.
- * Return 0 on success.
- * @file_send_sigiotask:
- * Check permission for the file owner @fown to send SIGIO or SIGURG to the
- * process @tsk. Note that this hook is sometimes called from interrupt.
- * Note that the fown_struct, @fown, is never outside the context of a
- * struct file, so the file structure (and associated security information)
- * can always be obtained:
- * container_of(fown, struct file, f_owner)
- * @tsk contains the structure of task receiving signal.
- * @fown contains the file owner information.
- * @sig is the signal that will be sent. When 0, kernel sends SIGIO.
- * Return 0 if permission is granted.
- * @file_receive:
- * This hook allows security modules to control the ability of a process
- * to receive an open file descriptor via socket IPC.
- * @file contains the file structure being received.
- * Return 0 if permission is granted.
- * @file_open
- * Save open-time permission checking state for later use upon
- * file_permission, and recheck access if anything has changed
- * since inode_permission.
- *
- * Security hooks for task operations.
- *
- * @task_create:
- * Check permission before creating a child process. See the clone(2)
- * manual page for definitions of the @clone_flags.
- * @clone_flags contains the flags indicating what should be shared.
- * Return 0 if permission is granted.
- * @task_free:
- * @task task being freed
- * Handle release of task-related resources. (Note that this can be called
- * from interrupt context.)
- * @cred_alloc_blank:
- * @cred points to the credentials.
- * @gfp indicates the atomicity of any memory allocations.
- * Only allocate sufficient memory and attach to @cred such that
- * cred_transfer() will not get ENOMEM.
- * @cred_free:
- * @cred points to the credentials.
- * Deallocate and clear the cred->security field in a set of credentials.
- * @cred_prepare:
- * @new points to the new credentials.
- * @old points to the original credentials.
- * @gfp indicates the atomicity of any memory allocations.
- * Prepare a new set of credentials by copying the data from the old set.
- * @cred_transfer:
- * @new points to the new credentials.
- * @old points to the original credentials.
- * Transfer data from original creds to new creds
- * @kernel_act_as:
- * Set the credentials for a kernel service to act as (subjective context).
- * @new points to the credentials to be modified.
- * @secid specifies the security ID to be set
- * The current task must be the one that nominated @secid.
- * Return 0 if successful.
- * @kernel_create_files_as:
- * Set the file creation context in a set of credentials to be the same as
- * the objective context of the specified inode.
- * @new points to the credentials to be modified.
- * @inode points to the inode to use as a reference.
- * The current task must be the one that nominated @inode.
- * Return 0 if successful.
- * @kernel_fw_from_file:
- * Load firmware from userspace (not called for built-in firmware).
- * @file contains the file structure pointing to the file containing
- * the firmware to load. This argument will be NULL if the firmware
- * was loaded via the uevent-triggered blob-based interface exposed
- * by CONFIG_FW_LOADER_USER_HELPER.
- * @buf pointer to buffer containing firmware contents.
- * @size length of the firmware contents.
- * Return 0 if permission is granted.
- * @kernel_module_request:
- * Ability to trigger the kernel to automatically upcall to userspace for
- * userspace to load a kernel module with the given name.
- * @kmod_name name of the module requested by the kernel
- * Return 0 if successful.
- * @kernel_module_from_file:
- * Load a kernel module from userspace.
- * @file contains the file structure pointing to the file containing
- * the kernel module to load. If the module is being loaded from a blob,
- * this argument will be NULL.
- * Return 0 if permission is granted.
- * @task_fix_setuid:
- * Update the module's state after setting one or more of the user
- * identity attributes of the current process. The @flags parameter
- * indicates which of the set*uid system calls invoked this hook. If
- * @new is the set of credentials that will be installed. Modifications
- * should be made to this rather than to @current->cred.
- * @old is the set of credentials that are being replaces
- * @flags contains one of the LSM_SETID_* values.
- * Return 0 on success.
- * @task_setpgid:
- * Check permission before setting the process group identifier of the
- * process @p to @pgid.
- * @p contains the task_struct for process being modified.
- * @pgid contains the new pgid.
- * Return 0 if permission is granted.
- * @task_getpgid:
- * Check permission before getting the process group identifier of the
- * process @p.
- * @p contains the task_struct for the process.
- * Return 0 if permission is granted.
- * @task_getsid:
- * Check permission before getting the session identifier of the process
- * @p.
- * @p contains the task_struct for the process.
- * Return 0 if permission is granted.
- * @task_getsecid:
- * Retrieve the security identifier of the process @p.
- * @p contains the task_struct for the process and place is into @secid.
- * In case of failure, @secid will be set to zero.
- *
- * @task_setnice:
- * Check permission before setting the nice value of @p to @nice.
- * @p contains the task_struct of process.
- * @nice contains the new nice value.
- * Return 0 if permission is granted.
- * @task_setioprio
- * Check permission before setting the ioprio value of @p to @ioprio.
- * @p contains the task_struct of process.
- * @ioprio contains the new ioprio value
- * Return 0 if permission is granted.
- * @task_getioprio
- * Check permission before getting the ioprio value of @p.
- * @p contains the task_struct of process.
- * Return 0 if permission is granted.
- * @task_setrlimit:
- * Check permission before setting the resource limits of the current
- * process for @resource to @new_rlim. The old resource limit values can
- * be examined by dereferencing (current->signal->rlim + resource).
- * @resource contains the resource whose limit is being set.
- * @new_rlim contains the new limits for @resource.
- * Return 0 if permission is granted.
- * @task_setscheduler:
- * Check permission before setting scheduling policy and/or parameters of
- * process @p based on @policy and @lp.
- * @p contains the task_struct for process.
- * @policy contains the scheduling policy.
- * @lp contains the scheduling parameters.
- * Return 0 if permission is granted.
- * @task_getscheduler:
- * Check permission before obtaining scheduling information for process
- * @p.
- * @p contains the task_struct for process.
- * Return 0 if permission is granted.
- * @task_movememory
- * Check permission before moving memory owned by process @p.
- * @p contains the task_struct for process.
- * Return 0 if permission is granted.
- * @task_kill:
- * Check permission before sending signal @sig to @p. @info can be NULL,
- * the constant 1, or a pointer to a siginfo structure. If @info is 1 or
- * SI_FROMKERNEL(info) is true, then the signal should be viewed as coming
- * from the kernel and should typically be permitted.
- * SIGIO signals are handled separately by the send_sigiotask hook in
- * file_security_ops.
- * @p contains the task_struct for process.
- * @info contains the signal information.
- * @sig contains the signal value.
- * @secid contains the sid of the process where the signal originated
- * Return 0 if permission is granted.
- * @task_wait:
- * Check permission before allowing a process to reap a child process @p
- * and collect its status information.
- * @p contains the task_struct for process.
- * Return 0 if permission is granted.
- * @task_prctl:
- * Check permission before performing a process control operation on the
- * current process.
- * @option contains the operation.
- * @arg2 contains a argument.
- * @arg3 contains a argument.
- * @arg4 contains a argument.
- * @arg5 contains a argument.
- * Return -ENOSYS if no-one wanted to handle this op, any other value to
- * cause prctl() to return immediately with that value.
- * @task_to_inode:
- * Set the security attributes for an inode based on an associated task's
- * security attributes, e.g. for /proc/pid inodes.
- * @p contains the task_struct for the task.
- * @inode contains the inode structure for the inode.
- *
- * Security hooks for Netlink messaging.
- *
- * @netlink_send:
- * Save security information for a netlink message so that permission
- * checking can be performed when the message is processed. The security
- * information can be saved using the eff_cap field of the
- * netlink_skb_parms structure. Also may be used to provide fine
- * grained control over message transmission.
- * @sk associated sock of task sending the message.
- * @skb contains the sk_buff structure for the netlink message.
- * Return 0 if the information was successfully saved and message
- * is allowed to be transmitted.
- *
- * Security hooks for Unix domain networking.
- *
- * @unix_stream_connect:
- * Check permissions before establishing a Unix domain stream connection
- * between @sock and @other.
- * @sock contains the sock structure.
- * @other contains the peer sock structure.
- * @newsk contains the new sock structure.
- * Return 0 if permission is granted.
- * @unix_may_send:
- * Check permissions before connecting or sending datagrams from @sock to
- * @other.
- * @sock contains the socket structure.
- * @other contains the peer socket structure.
- * Return 0 if permission is granted.
- *
- * The @unix_stream_connect and @unix_may_send hooks were necessary because
- * Linux provides an alternative to the conventional file name space for Unix
- * domain sockets. Whereas binding and connecting to sockets in the file name
- * space is mediated by the typical file permissions (and caught by the mknod
- * and permission hooks in inode_security_ops), binding and connecting to
- * sockets in the abstract name space is completely unmediated. Sufficient
- * control of Unix domain sockets in the abstract name space isn't possible
- * using only the socket layer hooks, since we need to know the actual target
- * socket, which is not looked up until we are inside the af_unix code.
- *
- * Security hooks for socket operations.
- *
- * @socket_create:
- * Check permissions prior to creating a new socket.
- * @family contains the requested protocol family.
- * @type contains the requested communications type.
- * @protocol contains the requested protocol.
- * @kern set to 1 if a kernel socket.
- * Return 0 if permission is granted.
- * @socket_post_create:
- * This hook allows a module to update or allocate a per-socket security
- * structure. Note that the security field was not added directly to the
- * socket structure, but rather, the socket security information is stored
- * in the associated inode. Typically, the inode alloc_security hook will
- * allocate and and attach security information to
- * sock->inode->i_security. This hook may be used to update the
- * sock->inode->i_security field with additional information that wasn't
- * available when the inode was allocated.
- * @sock contains the newly created socket structure.
- * @family contains the requested protocol family.
- * @type contains the requested communications type.
- * @protocol contains the requested protocol.
- * @kern set to 1 if a kernel socket.
- * @socket_bind:
- * Check permission before socket protocol layer bind operation is
- * performed and the socket @sock is bound to the address specified in the
- * @address parameter.
- * @sock contains the socket structure.
- * @address contains the address to bind to.
- * @addrlen contains the length of address.
- * Return 0 if permission is granted.
- * @socket_connect:
- * Check permission before socket protocol layer connect operation
- * attempts to connect socket @sock to a remote address, @address.
- * @sock contains the socket structure.
- * @address contains the address of remote endpoint.
- * @addrlen contains the length of address.
- * Return 0 if permission is granted.
- * @socket_listen:
- * Check permission before socket protocol layer listen operation.
- * @sock contains the socket structure.
- * @backlog contains the maximum length for the pending connection queue.
- * Return 0 if permission is granted.
- * @socket_accept:
- * Check permission before accepting a new connection. Note that the new
- * socket, @newsock, has been created and some information copied to it,
- * but the accept operation has not actually been performed.
- * @sock contains the listening socket structure.
- * @newsock contains the newly created server socket for connection.
- * Return 0 if permission is granted.
- * @socket_sendmsg:
- * Check permission before transmitting a message to another socket.
- * @sock contains the socket structure.
- * @msg contains the message to be transmitted.
- * @size contains the size of message.
- * Return 0 if permission is granted.
- * @socket_recvmsg:
- * Check permission before receiving a message from a socket.
- * @sock contains the socket structure.
- * @msg contains the message structure.
- * @size contains the size of message structure.
- * @flags contains the operational flags.
- * Return 0 if permission is granted.
- * @socket_getsockname:
- * Check permission before the local address (name) of the socket object
- * @sock is retrieved.
- * @sock contains the socket structure.
- * Return 0 if permission is granted.
- * @socket_getpeername:
- * Check permission before the remote address (name) of a socket object
- * @sock is retrieved.
- * @sock contains the socket structure.
- * Return 0 if permission is granted.
- * @socket_getsockopt:
- * Check permissions before retrieving the options associated with socket
- * @sock.
- * @sock contains the socket structure.
- * @level contains the protocol level to retrieve option from.
- * @optname contains the name of option to retrieve.
- * Return 0 if permission is granted.
- * @socket_setsockopt:
- * Check permissions before setting the options associated with socket
- * @sock.
- * @sock contains the socket structure.
- * @level contains the protocol level to set options for.
- * @optname contains the name of the option to set.
- * Return 0 if permission is granted.
- * @socket_shutdown:
- * Checks permission before all or part of a connection on the socket
- * @sock is shut down.
- * @sock contains the socket structure.
- * @how contains the flag indicating how future sends and receives are handled.
- * Return 0 if permission is granted.
- * @socket_sock_rcv_skb:
- * Check permissions on incoming network packets. This hook is distinct
- * from Netfilter's IP input hooks since it is the first time that the
- * incoming sk_buff @skb has been associated with a particular socket, @sk.
- * Must not sleep inside this hook because some callers hold spinlocks.
- * @sk contains the sock (not socket) associated with the incoming sk_buff.
- * @skb contains the incoming network data.
- * @socket_getpeersec_stream:
- * This hook allows the security module to provide peer socket security
- * state for unix or connected tcp sockets to userspace via getsockopt
- * SO_GETPEERSEC. For tcp sockets this can be meaningful if the
- * socket is associated with an ipsec SA.
- * @sock is the local socket.
- * @optval userspace memory where the security state is to be copied.
- * @optlen userspace int where the module should copy the actual length
- * of the security state.
- * @len as input is the maximum length to copy to userspace provided
- * by the caller.
- * Return 0 if all is well, otherwise, typical getsockopt return
- * values.
- * @socket_getpeersec_dgram:
- * This hook allows the security module to provide peer socket security
- * state for udp sockets on a per-packet basis to userspace via
- * getsockopt SO_GETPEERSEC. The application must first have indicated
- * the IP_PASSSEC option via getsockopt. It can then retrieve the
- * security state returned by this hook for a packet via the SCM_SECURITY
- * ancillary message type.
- * @skb is the skbuff for the packet being queried
- * @secdata is a pointer to a buffer in which to copy the security data
- * @seclen is the maximum length for @secdata
- * Return 0 on success, error on failure.
- * @sk_alloc_security:
- * Allocate and attach a security structure to the sk->sk_security field,
- * which is used to copy security attributes between local stream sockets.
- * @sk_free_security:
- * Deallocate security structure.
- * @sk_clone_security:
- * Clone/copy security structure.
- * @sk_getsecid:
- * Retrieve the LSM-specific secid for the sock to enable caching of network
- * authorizations.
- * @sock_graft:
- * Sets the socket's isec sid to the sock's sid.
- * @inet_conn_request:
- * Sets the openreq's sid to socket's sid with MLS portion taken from peer sid.
- * @inet_csk_clone:
- * Sets the new child socket's sid to the openreq sid.
- * @inet_conn_established:
- * Sets the connection's peersid to the secmark on skb.
- * @secmark_relabel_packet:
- * check if the process should be allowed to relabel packets to the given secid
- * @security_secmark_refcount_inc
- * tells the LSM to increment the number of secmark labeling rules loaded
- * @security_secmark_refcount_dec
- * tells the LSM to decrement the number of secmark labeling rules loaded
- * @req_classify_flow:
- * Sets the flow's sid to the openreq sid.
- * @tun_dev_alloc_security:
- * This hook allows a module to allocate a security structure for a TUN
- * device.
- * @security pointer to a security structure pointer.
- * Returns a zero on success, negative values on failure.
- * @tun_dev_free_security:
- * This hook allows a module to free the security structure for a TUN
- * device.
- * @security pointer to the TUN device's security structure
- * @tun_dev_create:
- * Check permissions prior to creating a new TUN device.
- * @tun_dev_attach_queue:
- * Check permissions prior to attaching to a TUN device queue.
- * @security pointer to the TUN device's security structure.
- * @tun_dev_attach:
- * This hook can be used by the module to update any security state
- * associated with the TUN device's sock structure.
- * @sk contains the existing sock structure.
- * @security pointer to the TUN device's security structure.
- * @tun_dev_open:
- * This hook can be used by the module to update any security state
- * associated with the TUN device's security structure.
- * @security pointer to the TUN devices's security structure.
- * @skb_owned_by:
- * This hook sets the packet's owning sock.
- * @skb is the packet.
- * @sk the sock which owns the packet.
- *
- * Security hooks for XFRM operations.
- *
- * @xfrm_policy_alloc_security:
- * @ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy
- * Database used by the XFRM system.
- * @sec_ctx contains the security context information being provided by
- * the user-level policy update program (e.g., setkey).
- * Allocate a security structure to the xp->security field; the security
- * field is initialized to NULL when the xfrm_policy is allocated.
- * Return 0 if operation was successful (memory to allocate, legal context)
- * @gfp is to specify the context for the allocation
- * @xfrm_policy_clone_security:
- * @old_ctx contains an existing xfrm_sec_ctx.
- * @new_ctxp contains a new xfrm_sec_ctx being cloned from old.
- * Allocate a security structure in new_ctxp that contains the
- * information from the old_ctx structure.
- * Return 0 if operation was successful (memory to allocate).
- * @xfrm_policy_free_security:
- * @ctx contains the xfrm_sec_ctx
- * Deallocate xp->security.
- * @xfrm_policy_delete_security:
- * @ctx contains the xfrm_sec_ctx.
- * Authorize deletion of xp->security.
- * @xfrm_state_alloc:
- * @x contains the xfrm_state being added to the Security Association
- * Database by the XFRM system.
- * @sec_ctx contains the security context information being provided by
- * the user-level SA generation program (e.g., setkey or racoon).
- * Allocate a security structure to the x->security field; the security
- * field is initialized to NULL when the xfrm_state is allocated. Set the
- * context to correspond to sec_ctx. Return 0 if operation was successful
- * (memory to allocate, legal context).
- * @xfrm_state_alloc_acquire:
- * @x contains the xfrm_state being added to the Security Association
- * Database by the XFRM system.
- * @polsec contains the policy's security context.
- * @secid contains the secid from which to take the mls portion of the
- * context.
- * Allocate a security structure to the x->security field; the security
- * field is initialized to NULL when the xfrm_state is allocated. Set the
- * context to correspond to secid. Return 0 if operation was successful
- * (memory to allocate, legal context).
- * @xfrm_state_free_security:
- * @x contains the xfrm_state.
- * Deallocate x->security.
- * @xfrm_state_delete_security:
- * @x contains the xfrm_state.
- * Authorize deletion of x->security.
- * @xfrm_policy_lookup:
- * @ctx contains the xfrm_sec_ctx for which the access control is being
- * checked.
- * @fl_secid contains the flow security label that is used to authorize
- * access to the policy xp.
- * @dir contains the direction of the flow (input or output).
- * Check permission when a flow selects a xfrm_policy for processing
- * XFRMs on a packet. The hook is called when selecting either a
- * per-socket policy or a generic xfrm policy.
- * Return 0 if permission is granted, -ESRCH otherwise, or -errno
- * on other errors.
- * @xfrm_state_pol_flow_match:
- * @x contains the state to match.
- * @xp contains the policy to check for a match.
- * @fl contains the flow to check for a match.
- * Return 1 if there is a match.
- * @xfrm_decode_session:
- * @skb points to skb to decode.
- * @secid points to the flow key secid to set.
- * @ckall says if all xfrms used should be checked for same secid.
- * Return 0 if ckall is zero or all xfrms used have the same secid.
- *
- * Security hooks affecting all Key Management operations
- *
- * @key_alloc:
- * Permit allocation of a key and assign security data. Note that key does
- * not have a serial number assigned at this point.
- * @key points to the key.
- * @flags is the allocation flags
- * Return 0 if permission is granted, -ve error otherwise.
- * @key_free:
- * Notification of destruction; free security data.
- * @key points to the key.
- * No return value.
- * @key_permission:
- * See whether a specific operational right is granted to a process on a
- * key.
- * @key_ref refers to the key (key pointer + possession attribute bit).
- * @cred points to the credentials to provide the context against which to
- * evaluate the security data on the key.
- * @perm describes the combination of permissions required of this key.
- * Return 0 if permission is granted, -ve error otherwise.
- * @key_getsecurity:
- * Get a textual representation of the security context attached to a key
- * for the purposes of honouring KEYCTL_GETSECURITY. This function
- * allocates the storage for the NUL-terminated string and the caller
- * should free it.
- * @key points to the key to be queried.
- * @_buffer points to a pointer that should be set to point to the
- * resulting string (if no label or an error occurs).
- * Return the length of the string (including terminating NUL) or -ve if
- * an error.
- * May also return 0 (and a NULL buffer pointer) if there is no label.
- *
- * Security hooks affecting all System V IPC operations.
- *
- * @ipc_permission:
- * Check permissions for access to IPC
- * @ipcp contains the kernel IPC permission structure
- * @flag contains the desired (requested) permission set
- * Return 0 if permission is granted.
- * @ipc_getsecid:
- * Get the secid associated with the ipc object.
- * @ipcp contains the kernel IPC permission structure.
- * @secid contains a pointer to the location where result will be saved.
- * In case of failure, @secid will be set to zero.
- *
- * Security hooks for individual messages held in System V IPC message queues
- * @msg_msg_alloc_security:
- * Allocate and attach a security structure to the msg->security field.
- * The security field is initialized to NULL when the structure is first
- * created.
- * @msg contains the message structure to be modified.
- * Return 0 if operation was successful and permission is granted.
- * @msg_msg_free_security:
- * Deallocate the security structure for this message.
- * @msg contains the message structure to be modified.
- *
- * Security hooks for System V IPC Message Queues
- *
- * @msg_queue_alloc_security:
- * Allocate and attach a security structure to the
- * msq->q_perm.security field. The security field is initialized to
- * NULL when the structure is first created.
- * @msq contains the message queue structure to be modified.
- * Return 0 if operation was successful and permission is granted.
- * @msg_queue_free_security:
- * Deallocate security structure for this message queue.
- * @msq contains the message queue structure to be modified.
- * @msg_queue_associate:
- * Check permission when a message queue is requested through the
- * msgget system call. This hook is only called when returning the
- * message queue identifier for an existing message queue, not when a
- * new message queue is created.
- * @msq contains the message queue to act upon.
- * @msqflg contains the operation control flags.
- * Return 0 if permission is granted.
- * @msg_queue_msgctl:
- * Check permission when a message control operation specified by @cmd
- * is to be performed on the message queue @msq.
- * The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO.
- * @msq contains the message queue to act upon. May be NULL.
- * @cmd contains the operation to be performed.
- * Return 0 if permission is granted.
- * @msg_queue_msgsnd:
- * Check permission before a message, @msg, is enqueued on the message
- * queue, @msq.
- * @msq contains the message queue to send message to.
- * @msg contains the message to be enqueued.
- * @msqflg contains operational flags.
- * Return 0 if permission is granted.
- * @msg_queue_msgrcv:
- * Check permission before a message, @msg, is removed from the message
- * queue, @msq. The @target task structure contains a pointer to the
- * process that will be receiving the message (not equal to the current
- * process when inline receives are being performed).
- * @msq contains the message queue to retrieve message from.
- * @msg contains the message destination.
- * @target contains the task structure for recipient process.
- * @type contains the type of message requested.
- * @mode contains the operational flags.
- * Return 0 if permission is granted.
- *
- * Security hooks for System V Shared Memory Segments
- *
- * @shm_alloc_security:
- * Allocate and attach a security structure to the shp->shm_perm.security
- * field. The security field is initialized to NULL when the structure is
- * first created.
- * @shp contains the shared memory structure to be modified.
- * Return 0 if operation was successful and permission is granted.
- * @shm_free_security:
- * Deallocate the security struct for this memory segment.
- * @shp contains the shared memory structure to be modified.
- * @shm_associate:
- * Check permission when a shared memory region is requested through the
- * shmget system call. This hook is only called when returning the shared
- * memory region identifier for an existing region, not when a new shared
- * memory region is created.
- * @shp contains the shared memory structure to be modified.
- * @shmflg contains the operation control flags.
- * Return 0 if permission is granted.
- * @shm_shmctl:
- * Check permission when a shared memory control operation specified by
- * @cmd is to be performed on the shared memory region @shp.
- * The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO.
- * @shp contains shared memory structure to be modified.
- * @cmd contains the operation to be performed.
- * Return 0 if permission is granted.
- * @shm_shmat:
- * Check permissions prior to allowing the shmat system call to attach the
- * shared memory segment @shp to the data segment of the calling process.
- * The attaching address is specified by @shmaddr.
- * @shp contains the shared memory structure to be modified.
- * @shmaddr contains the address to attach memory region to.
- * @shmflg contains the operational flags.
- * Return 0 if permission is granted.
- *
- * Security hooks for System V Semaphores
- *
- * @sem_alloc_security:
- * Allocate and attach a security structure to the sma->sem_perm.security
- * field. The security field is initialized to NULL when the structure is
- * first created.
- * @sma contains the semaphore structure
- * Return 0 if operation was successful and permission is granted.
- * @sem_free_security:
- * deallocate security struct for this semaphore
- * @sma contains the semaphore structure.
- * @sem_associate:
- * Check permission when a semaphore is requested through the semget
- * system call. This hook is only called when returning the semaphore
- * identifier for an existing semaphore, not when a new one must be
- * created.
- * @sma contains the semaphore structure.
- * @semflg contains the operation control flags.
- * Return 0 if permission is granted.
- * @sem_semctl:
- * Check permission when a semaphore operation specified by @cmd is to be
- * performed on the semaphore @sma. The @sma may be NULL, e.g. for
- * IPC_INFO or SEM_INFO.
- * @sma contains the semaphore structure. May be NULL.
- * @cmd contains the operation to be performed.
- * Return 0 if permission is granted.
- * @sem_semop
- * Check permissions before performing operations on members of the
- * semaphore set @sma. If the @alter flag is nonzero, the semaphore set
- * may be modified.
- * @sma contains the semaphore structure.
- * @sops contains the operations to perform.
- * @nsops contains the number of operations to perform.
- * @alter contains the flag indicating whether changes are to be made.
- * Return 0 if permission is granted.
- *
- * @binder_set_context_mgr
- * Check whether @mgr is allowed to be the binder context manager.
- * @mgr contains the task_struct for the task being registered.
- * Return 0 if permission is granted.
- * @binder_transaction
- * Check whether @from is allowed to invoke a binder transaction call
- * to @to.
- * @from contains the task_struct for the sending task.
- * @to contains the task_struct for the receiving task.
- * @binder_transfer_binder
- * Check whether @from is allowed to transfer a binder reference to @to.
- * @from contains the task_struct for the sending task.
- * @to contains the task_struct for the receiving task.
- * @binder_transfer_file
- * Check whether @from is allowed to transfer @file to @to.
- * @from contains the task_struct for the sending task.
- * @file contains the struct file being transferred.
- * @to contains the task_struct for the receiving task.
- *
- * @ptrace_access_check:
- * Check permission before allowing the current process to trace the
- * @child process.
- * Security modules may also want to perform a process tracing check
- * during an execve in the set_security or apply_creds hooks of
- * tracing check during an execve in the bprm_set_creds hook of
- * binprm_security_ops if the process is being traced and its security
- * attributes would be changed by the execve.
- * @child contains the task_struct structure for the target process.
- * @mode contains the PTRACE_MODE flags indicating the form of access.
- * Return 0 if permission is granted.
- * @ptrace_traceme:
- * Check that the @parent process has sufficient permission to trace the
- * current process before allowing the current process to present itself
- * to the @parent process for tracing.
- * @parent contains the task_struct structure for debugger process.
- * Return 0 if permission is granted.
- * @capget:
- * Get the @effective, @inheritable, and @permitted capability sets for
- * the @target process. The hook may also perform permission checking to
- * determine if the current process is allowed to see the capability sets
- * of the @target process.
- * @target contains the task_struct structure for target process.
- * @effective contains the effective capability set.
- * @inheritable contains the inheritable capability set.
- * @permitted contains the permitted capability set.
- * Return 0 if the capability sets were successfully obtained.
- * @capset:
- * Set the @effective, @inheritable, and @permitted capability sets for
- * the current process.
- * @new contains the new credentials structure for target process.
- * @old contains the current credentials structure for target process.
- * @effective contains the effective capability set.
- * @inheritable contains the inheritable capability set.
- * @permitted contains the permitted capability set.
- * Return 0 and update @new if permission is granted.
- * @capable:
- * Check whether the @tsk process has the @cap capability in the indicated
- * credentials.
- * @cred contains the credentials to use.
- * @ns contains the user namespace we want the capability in
- * @cap contains the capability <include/linux/capability.h>.
- * @audit: Whether to write an audit message or not
- * Return 0 if the capability is granted for @tsk.
- * @syslog:
- * Check permission before accessing the kernel message ring or changing
- * logging to the console.
- * See the syslog(2) manual page for an explanation of the @type values.
- * @type contains the type of action.
- * @from_file indicates the context of action (if it came from /proc).
- * Return 0 if permission is granted.
- * @settime:
- * Check permission to change the system time.
- * struct timespec and timezone are defined in include/linux/time.h
- * @ts contains new time
- * @tz contains new timezone
- * Return 0 if permission is granted.
- * @vm_enough_memory:
- * Check permissions for allocating a new virtual mapping.
- * @mm contains the mm struct it is being added to.
- * @pages contains the number of pages.
- * Return 0 if permission is granted.
- *
- * @ismaclabel:
- * Check if the extended attribute specified by @name
- * represents a MAC label. Returns 1 if name is a MAC
- * attribute otherwise returns 0.
- * @name full extended attribute name to check against
- * LSM as a MAC label.
- *
- * @secid_to_secctx:
- * Convert secid to security context. If secdata is NULL the length of
- * the result will be returned in seclen, but no secdata will be returned.
- * This does mean that the length could change between calls to check the
- * length and the next call which actually allocates and returns the secdata.
- * @secid contains the security ID.
- * @secdata contains the pointer that stores the converted security context.
- * @seclen pointer which contains the length of the data
- * @secctx_to_secid:
- * Convert security context to secid.
- * @secid contains the pointer to the generated security ID.
- * @secdata contains the security context.
- *
- * @release_secctx:
- * Release the security context.
- * @secdata contains the security context.
- * @seclen contains the length of the security context.
- *
- * Security hooks for Audit
- *
- * @audit_rule_init:
- * Allocate and initialize an LSM audit rule structure.
- * @field contains the required Audit action. Fields flags are defined in include/linux/audit.h
- * @op contains the operator the rule uses.
- * @rulestr contains the context where the rule will be applied to.
- * @lsmrule contains a pointer to receive the result.
- * Return 0 if @lsmrule has been successfully set,
- * -EINVAL in case of an invalid rule.
- *
- * @audit_rule_known:
- * Specifies whether given @rule contains any fields related to current LSM.
- * @rule contains the audit rule of interest.
- * Return 1 in case of relation found, 0 otherwise.
- *
- * @audit_rule_match:
- * Determine if given @secid matches a rule previously approved
- * by @audit_rule_known.
- * @secid contains the security id in question.
- * @field contains the field which relates to current LSM.
- * @op contains the operator that will be used for matching.
- * @rule points to the audit rule that will be checked against.
- * @actx points to the audit context associated with the check.
- * Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure.
- *
- * @audit_rule_free:
- * Deallocate the LSM audit rule structure previously allocated by
- * audit_rule_init.
- * @rule contains the allocated rule
- *
- * @inode_notifysecctx:
- * Notify the security module of what the security context of an inode
- * should be. Initializes the incore security context managed by the
- * security module for this inode. Example usage: NFS client invokes
- * this hook to initialize the security context in its incore inode to the
- * value provided by the server for the file when the server returned the
- * file's attributes to the client.
- *
- * Must be called with inode->i_mutex locked.
- *
- * @inode we wish to set the security context of.
- * @ctx contains the string which we wish to set in the inode.
- * @ctxlen contains the length of @ctx.
- *
- * @inode_setsecctx:
- * Change the security context of an inode. Updates the
- * incore security context managed by the security module and invokes the
- * fs code as needed (via __vfs_setxattr_noperm) to update any backing
- * xattrs that represent the context. Example usage: NFS server invokes
- * this hook to change the security context in its incore inode and on the
- * backing filesystem to a value provided by the client on a SETATTR
- * operation.
- *
- * Must be called with inode->i_mutex locked.
- *
- * @dentry contains the inode we wish to set the security context of.
- * @ctx contains the string which we wish to set in the inode.
- * @ctxlen contains the length of @ctx.
- *
- * @inode_getsecctx:
- * On success, returns 0 and fills out @ctx and @ctxlen with the security
- * context for the given @inode.
- *
- * @inode we wish to get the security context of.
- * @ctx is a pointer in which to place the allocated security context.
- * @ctxlen points to the place to put the length of @ctx.
- * This is the main security structure.
- */
- struct security_operations {
- char name[SECURITY_NAME_MAX + 1];
-
- int (*binder_set_context_mgr) (struct task_struct *mgr);
- int (*binder_transaction) (struct task_struct *from,
- struct task_struct *to);
- int (*binder_transfer_binder) (struct task_struct *from,
- struct task_struct *to);
- int (*binder_transfer_file) (struct task_struct *from,
- struct task_struct *to, struct file *file);
-
- int (*ptrace_access_check) (struct task_struct *child, unsigned int mode);
- int (*ptrace_traceme) (struct task_struct *parent);
- int (*capget) (struct task_struct *target,
- kernel_cap_t *effective,
- kernel_cap_t *inheritable, kernel_cap_t *permitted);
- int (*capset) (struct cred *new,
- const struct cred *old,
- const kernel_cap_t *effective,
- const kernel_cap_t *inheritable,
- const kernel_cap_t *permitted);
- int (*capable) (const struct cred *cred, struct user_namespace *ns,
- int cap, int audit);
- int (*quotactl) (int cmds, int type, int id, struct super_block *sb);
- int (*quota_on) (struct dentry *dentry);
- int (*syslog) (int type);
- int (*settime) (const struct timespec *ts, const struct timezone *tz);
- int (*vm_enough_memory) (struct mm_struct *mm, long pages);
-
- int (*bprm_set_creds) (struct linux_binprm *bprm);
- int (*bprm_check_security) (struct linux_binprm *bprm);
- int (*bprm_secureexec) (struct linux_binprm *bprm);
- void (*bprm_committing_creds) (struct linux_binprm *bprm);
- void (*bprm_committed_creds) (struct linux_binprm *bprm);
-
- int (*sb_alloc_security) (struct super_block *sb);
- void (*sb_free_security) (struct super_block *sb);
- int (*sb_copy_data) (char *orig, char *copy);
- int (*sb_remount) (struct super_block *sb, void *data);
- int (*sb_kern_mount) (struct super_block *sb, int flags, void *data);
- int (*sb_show_options) (struct seq_file *m, struct super_block *sb);
- int (*sb_statfs) (struct dentry *dentry);
- int (*sb_mount) (const char *dev_name, struct path *path,
- const char *type, unsigned long flags, void *data);
- int (*sb_umount) (struct vfsmount *mnt, int flags);
- int (*sb_pivotroot) (struct path *old_path,
- struct path *new_path);
- int (*sb_set_mnt_opts) (struct super_block *sb,
- struct security_mnt_opts *opts,
- unsigned long kern_flags,
- unsigned long *set_kern_flags);
- int (*sb_clone_mnt_opts) (const struct super_block *oldsb,
- struct super_block *newsb);
- int (*sb_parse_opts_str) (char *options, struct security_mnt_opts *opts);
- int (*dentry_init_security) (struct dentry *dentry, int mode,
- struct qstr *name, void **ctx,
- u32 *ctxlen);
-
-
- #ifdef CONFIG_SECURITY_PATH
- int (*path_unlink) (struct path *dir, struct dentry *dentry);
- int (*path_mkdir) (struct path *dir, struct dentry *dentry, umode_t mode);
- int (*path_rmdir) (struct path *dir, struct dentry *dentry);
- int (*path_mknod) (struct path *dir, struct dentry *dentry, umode_t mode,
- unsigned int dev);
- int (*path_truncate) (struct path *path);
- int (*path_symlink) (struct path *dir, struct dentry *dentry,
- const char *old_name);
- int (*path_link) (struct dentry *old_dentry, struct path *new_dir,
- struct dentry *new_dentry);
- int (*path_rename) (struct path *old_dir, struct dentry *old_dentry,
- struct path *new_dir, struct dentry *new_dentry);
- int (*path_chmod) (struct path *path, umode_t mode);
- int (*path_chown) (struct path *path, kuid_t uid, kgid_t gid);
- int (*path_chroot) (struct path *path);
- #endif
-
- int (*inode_alloc_security) (struct inode *inode);
- void (*inode_free_security) (struct inode *inode);
- int (*inode_init_security) (struct inode *inode, struct inode *dir,
- const struct qstr *qstr, const char **name,
- void **value, size_t *len);
- int (*inode_create) (struct inode *dir,
- struct dentry *dentry, umode_t mode);
- int (*inode_link) (struct dentry *old_dentry,
- struct inode *dir, struct dentry *new_dentry);
- int (*inode_unlink) (struct inode *dir, struct dentry *dentry);
- int (*inode_symlink) (struct inode *dir,
- struct dentry *dentry, const char *old_name);
- int (*inode_mkdir) (struct inode *dir, struct dentry *dentry, umode_t mode);
- int (*inode_rmdir) (struct inode *dir, struct dentry *dentry);
- int (*inode_mknod) (struct inode *dir, struct dentry *dentry,
- umode_t mode, dev_t dev);
- int (*inode_rename) (struct inode *old_dir, struct dentry *old_dentry,
- struct inode *new_dir, struct dentry *new_dentry);
- int (*inode_readlink) (struct dentry *dentry);
- int (*inode_follow_link) (struct dentry *dentry, struct inode *inode,
- bool rcu);
- int (*inode_permission) (struct inode *inode, int mask);
- int (*inode_setattr) (struct dentry *dentry, struct iattr *attr);
- int (*inode_getattr) (const struct path *path);
- int (*inode_setxattr) (struct dentry *dentry, const char *name,
- const void *value, size_t size, int flags);
- void (*inode_post_setxattr) (struct dentry *dentry, const char *name,
- const void *value, size_t size, int flags);
- int (*inode_getxattr) (struct dentry *dentry, const char *name);
- int (*inode_listxattr) (struct dentry *dentry);
- int (*inode_removexattr) (struct dentry *dentry, const char *name);
- int (*inode_need_killpriv) (struct dentry *dentry);
- int (*inode_killpriv) (struct dentry *dentry);
- int (*inode_getsecurity) (const struct inode *inode, const char *name, void **buffer, bool alloc);
- int (*inode_setsecurity) (struct inode *inode, const char *name, const void *value, size_t size, int flags);
- int (*inode_listsecurity) (struct inode *inode, char *buffer, size_t buffer_size);
- void (*inode_getsecid) (const struct inode *inode, u32 *secid);
-
- int (*file_permission) (struct file *file, int mask);
- int (*file_alloc_security) (struct file *file);
- void (*file_free_security) (struct file *file);
- int (*file_ioctl) (struct file *file, unsigned int cmd,
- unsigned long arg);
- int (*mmap_addr) (unsigned long addr);
- int (*mmap_file) (struct file *file,
- unsigned long reqprot, unsigned long prot,
- unsigned long flags);
- int (*file_mprotect) (struct vm_area_struct *vma,
- unsigned long reqprot,
- unsigned long prot);
- int (*file_lock) (struct file *file, unsigned int cmd);
- int (*file_fcntl) (struct file *file, unsigned int cmd,
- unsigned long arg);
- void (*file_set_fowner) (struct file *file);
- int (*file_send_sigiotask) (struct task_struct *tsk,
- struct fown_struct *fown, int sig);
- int (*file_receive) (struct file *file);
- int (*file_open) (struct file *file, const struct cred *cred);
-
- int (*task_create) (unsigned long clone_flags);
- void (*task_free) (struct task_struct *task);
- int (*cred_alloc_blank) (struct cred *cred, gfp_t gfp);
- void (*cred_free) (struct cred *cred);
- int (*cred_prepare)(struct cred *new, const struct cred *old,
- gfp_t gfp);
- void (*cred_transfer)(struct cred *new, const struct cred *old);
- int (*kernel_act_as)(struct cred *new, u32 secid);
- int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
- int (*kernel_fw_from_file)(struct file *file, char *buf, size_t size);
- int (*kernel_module_request)(char *kmod_name);
- int (*kernel_module_from_file)(struct file *file);
- int (*task_fix_setuid) (struct cred *new, const struct cred *old,
- int flags);
- int (*task_setpgid) (struct task_struct *p, pid_t pgid);
- int (*task_getpgid) (struct task_struct *p);
- int (*task_getsid) (struct task_struct *p);
- void (*task_getsecid) (struct task_struct *p, u32 *secid);
- int (*task_setnice) (struct task_struct *p, int nice);
- int (*task_setioprio) (struct task_struct *p, int ioprio);
- int (*task_getioprio) (struct task_struct *p);
- int (*task_setrlimit) (struct task_struct *p, unsigned int resource,
- struct rlimit *new_rlim);
- int (*task_setscheduler) (struct task_struct *p);
- int (*task_getscheduler) (struct task_struct *p);
- int (*task_movememory) (struct task_struct *p);
- int (*task_kill) (struct task_struct *p,
- struct siginfo *info, int sig, u32 secid);
- int (*task_wait) (struct task_struct *p);
- int (*task_prctl) (int option, unsigned long arg2,
- unsigned long arg3, unsigned long arg4,
- unsigned long arg5);
- void (*task_to_inode) (struct task_struct *p, struct inode *inode);
-
- int (*ipc_permission) (struct kern_ipc_perm *ipcp, short flag);
- void (*ipc_getsecid) (struct kern_ipc_perm *ipcp, u32 *secid);
-
- int (*msg_msg_alloc_security) (struct msg_msg *msg);
- void (*msg_msg_free_security) (struct msg_msg *msg);
-
- int (*msg_queue_alloc_security) (struct msg_queue *msq);
- void (*msg_queue_free_security) (struct msg_queue *msq);
- int (*msg_queue_associate) (struct msg_queue *msq, int msqflg);
- int (*msg_queue_msgctl) (struct msg_queue *msq, int cmd);
- int (*msg_queue_msgsnd) (struct msg_queue *msq,
- struct msg_msg *msg, int msqflg);
- int (*msg_queue_msgrcv) (struct msg_queue *msq,
- struct msg_msg *msg,
- struct task_struct *target,
- long type, int mode);
-
- int (*shm_alloc_security) (struct shmid_kernel *shp);
- void (*shm_free_security) (struct shmid_kernel *shp);
- int (*shm_associate) (struct shmid_kernel *shp, int shmflg);
- int (*shm_shmctl) (struct shmid_kernel *shp, int cmd);
- int (*shm_shmat) (struct shmid_kernel *shp,
- char __user *shmaddr, int shmflg);
-
- int (*sem_alloc_security) (struct sem_array *sma);
- void (*sem_free_security) (struct sem_array *sma);
- int (*sem_associate) (struct sem_array *sma, int semflg);
- int (*sem_semctl) (struct sem_array *sma, int cmd);
- int (*sem_semop) (struct sem_array *sma,
- struct sembuf *sops, unsigned nsops, int alter);
-
- int (*netlink_send) (struct sock *sk, struct sk_buff *skb);
-
- void (*d_instantiate) (struct dentry *dentry, struct inode *inode);
-
- int (*getprocattr) (struct task_struct *p, char *name, char **value);
- int (*setprocattr) (struct task_struct *p, char *name, void *value, size_t size);
- int (*ismaclabel) (const char *name);
- int (*secid_to_secctx) (u32 secid, char **secdata, u32 *seclen);
- int (*secctx_to_secid) (const char *secdata, u32 seclen, u32 *secid);
- void (*release_secctx) (char *secdata, u32 seclen);
-
- int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen);
- int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen);
- int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen);
-
- #ifdef CONFIG_SECURITY_NETWORK
- int (*unix_stream_connect) (struct sock *sock, struct sock *other, struct sock *newsk);
- int (*unix_may_send) (struct socket *sock, struct socket *other);
-
- int (*socket_create) (int family, int type, int protocol, int kern);
- int (*socket_post_create) (struct socket *sock, int family,
- int type, int protocol, int kern);
- int (*socket_bind) (struct socket *sock,
- struct sockaddr *address, int addrlen);
- int (*socket_connect) (struct socket *sock,
- struct sockaddr *address, int addrlen);
- int (*socket_listen) (struct socket *sock, int backlog);
- int (*socket_accept) (struct socket *sock, struct socket *newsock);
- int (*socket_sendmsg) (struct socket *sock,
- struct msghdr *msg, int size);
- int (*socket_recvmsg) (struct socket *sock,
- struct msghdr *msg, int size, int flags);
- int (*socket_getsockname) (struct socket *sock);
- int (*socket_getpeername) (struct socket *sock);
- int (*socket_getsockopt) (struct socket *sock, int level, int optname);
- int (*socket_setsockopt) (struct socket *sock, int level, int optname);
- int (*socket_shutdown) (struct socket *sock, int how);
- int (*socket_sock_rcv_skb) (struct sock *sk, struct sk_buff *skb);
- int (*socket_getpeersec_stream) (struct socket *sock, char __user *optval, int __user *optlen, unsigned len);
- int (*socket_getpeersec_dgram) (struct socket *sock, struct sk_buff *skb, u32 *secid);
- int (*sk_alloc_security) (struct sock *sk, int family, gfp_t priority);
- void (*sk_free_security) (struct sock *sk);
- void (*sk_clone_security) (const struct sock *sk, struct sock *newsk);
- void (*sk_getsecid) (struct sock *sk, u32 *secid);
- void (*sock_graft) (struct sock *sk, struct socket *parent);
- int (*inet_conn_request) (struct sock *sk, struct sk_buff *skb,
- struct request_sock *req);
- void (*inet_csk_clone) (struct sock *newsk, const struct request_sock *req);
- void (*inet_conn_established) (struct sock *sk, struct sk_buff *skb);
- int (*secmark_relabel_packet) (u32 secid);
- void (*secmark_refcount_inc) (void);
- void (*secmark_refcount_dec) (void);
- void (*req_classify_flow) (const struct request_sock *req, struct flowi *fl);
- int (*tun_dev_alloc_security) (void **security);
- void (*tun_dev_free_security) (void *security);
- int (*tun_dev_create) (void);
- int (*tun_dev_attach_queue) (void *security);
- int (*tun_dev_attach) (struct sock *sk, void *security);
- int (*tun_dev_open) (void *security);
- #endif /* CONFIG_SECURITY_NETWORK */
-
- #ifdef CONFIG_SECURITY_NETWORK_XFRM
- int (*xfrm_policy_alloc_security) (struct xfrm_sec_ctx **ctxp,
- struct xfrm_user_sec_ctx *sec_ctx, gfp_t gfp);
- int (*xfrm_policy_clone_security) (struct xfrm_sec_ctx *old_ctx, struct xfrm_sec_ctx **new_ctx);
- void (*xfrm_policy_free_security) (struct xfrm_sec_ctx *ctx);
- int (*xfrm_policy_delete_security) (struct xfrm_sec_ctx *ctx);
- int (*xfrm_state_alloc) (struct xfrm_state *x,
- struct xfrm_user_sec_ctx *sec_ctx);
- int (*xfrm_state_alloc_acquire) (struct xfrm_state *x,
- struct xfrm_sec_ctx *polsec,
- u32 secid);
- void (*xfrm_state_free_security) (struct xfrm_state *x);
- int (*xfrm_state_delete_security) (struct xfrm_state *x);
- int (*xfrm_policy_lookup) (struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir);
- int (*xfrm_state_pol_flow_match) (struct xfrm_state *x,
- struct xfrm_policy *xp,
- const struct flowi *fl);
- int (*xfrm_decode_session) (struct sk_buff *skb, u32 *secid, int ckall);
- #endif /* CONFIG_SECURITY_NETWORK_XFRM */
-
- /* key management security hooks */
- #ifdef CONFIG_KEYS
- int (*key_alloc) (struct key *key, const struct cred *cred, unsigned long flags);
- void (*key_free) (struct key *key);
- int (*key_permission) (key_ref_t key_ref,
- const struct cred *cred,
- unsigned perm);
- int (*key_getsecurity)(struct key *key, char **_buffer);
- #endif /* CONFIG_KEYS */
-
- #ifdef CONFIG_AUDIT
- int (*audit_rule_init) (u32 field, u32 op, char *rulestr, void **lsmrule);
- int (*audit_rule_known) (struct audit_krule *krule);
- int (*audit_rule_match) (u32 secid, u32 field, u32 op, void *lsmrule,
- struct audit_context *actx);
- void (*audit_rule_free) (void *lsmrule);
- #endif /* CONFIG_AUDIT */
- };
-
/* prototypes */
extern int security_init(void);
- extern int security_module_enable(struct security_operations *ops);
- extern int register_security(struct security_operations *ops);
- extern void __init security_fixup_ops(struct security_operations *ops);
-
/* Security operations */
int security_binder_set_context_mgr(struct task_struct *mgr);
struct inode *new_dir, struct dentry *new_dentry,
unsigned int flags);
int security_inode_readlink(struct dentry *dentry);
-int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd);
+int security_inode_follow_link(struct dentry *dentry, struct inode *inode,
+ bool rcu);
int security_inode_permission(struct inode *inode, int mask);
int security_inode_setattr(struct dentry *dentry, struct iattr *attr);
int security_inode_getattr(const struct path *path);
static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
{
- return cap_vm_enough_memory(mm, pages);
+ return __vm_enough_memory(mm, pages, cap_vm_enough_memory(mm, pages));
}
static inline int security_bprm_set_creds(struct linux_binprm *bprm)
}
static inline int security_inode_follow_link(struct dentry *dentry,
- struct nameidata *nd)
+ struct inode *inode,
+ bool rcu)
{
return 0;
}
static inline int security_netlink_send(struct sock *sk, struct sk_buff *skb)
{
- return cap_netlink_send(sk, skb);
+ return 0;
}
static inline int security_ismaclabel(const char *name)
{ }
#endif /* CONFIG_SECURITY */
- #ifdef CONFIG_SECURITY_YAMA
- extern int yama_ptrace_access_check(struct task_struct *child,
- unsigned int mode);
- extern int yama_ptrace_traceme(struct task_struct *parent);
- extern void yama_task_free(struct task_struct *task);
- extern int yama_task_prctl(int option, unsigned long arg2, unsigned long arg3,
- unsigned long arg4, unsigned long arg5);
- #else
- static inline int yama_ptrace_access_check(struct task_struct *child,
- unsigned int mode)
- {
- return 0;
- }
-
- static inline int yama_ptrace_traceme(struct task_struct *parent)
- {
- return 0;
- }
-
- static inline void yama_task_free(struct task_struct *task)
- {
- }
-
- static inline int yama_task_prctl(int option, unsigned long arg2,
- unsigned long arg3, unsigned long arg4,
- unsigned long arg5)
- {
- return -ENOSYS;
- }
- #endif /* CONFIG_SECURITY_YAMA */
-
#endif /* ! __LINUX_SECURITY_H */
* RETURNS:
* %true if @mask is set, %false if made noop because @task was dying.
*/
-bool task_set_jobctl_pending(struct task_struct *task, unsigned int mask)
+bool task_set_jobctl_pending(struct task_struct *task, unsigned long mask)
{
BUG_ON(mask & ~(JOBCTL_PENDING_MASK | JOBCTL_STOP_CONSUME |
JOBCTL_STOP_SIGMASK | JOBCTL_TRAPPING));
* CONTEXT:
* Must be called with @task->sighand->siglock held.
*/
-void task_clear_jobctl_pending(struct task_struct *task, unsigned int mask)
+void task_clear_jobctl_pending(struct task_struct *task, unsigned long mask)
{
BUG_ON(mask & ~JOBCTL_PENDING_MASK);
}
/*
- * Flush all pending signals for a task.
+ * Flush all pending signals for this kthread.
*/
- void __flush_signals(struct task_struct *t)
- {
- clear_tsk_thread_flag(t, TIF_SIGPENDING);
- flush_sigqueue(&t->pending);
- flush_sigqueue(&t->signal->shared_pending);
- }
-
void flush_signals(struct task_struct *t)
{
unsigned long flags;
spin_lock_irqsave(&t->sighand->siglock, flags);
- __flush_signals(t);
+ clear_tsk_thread_flag(t, TIF_SIGPENDING);
+ flush_sigqueue(&t->pending);
+ flush_sigqueue(&t->signal->shared_pending);
spin_unlock_irqrestore(&t->sighand->siglock, flags);
}
struct signal_struct *sig = current->signal;
if (!(current->jobctl & JOBCTL_STOP_PENDING)) {
- unsigned int gstop = JOBCTL_STOP_PENDING | JOBCTL_STOP_CONSUME;
+ unsigned long gstop = JOBCTL_STOP_PENDING | JOBCTL_STOP_CONSUME;
struct task_struct *t;
/* signr will be recorded in task->jobctl for retries */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
- #include <linux/security.h>
+ #include <linux/lsm_hooks.h>
#include <linux/integrity.h>
#include <linux/ima.h>
#include <linux/evm.h>
#define MAX_LSM_EVM_XATTR 2
+ /* Maximum number of letters for an LSM name string */
+ #define SECURITY_NAME_MAX 10
+
/* Boot-time LSM user choice */
static __initdata char chosen_lsm[SECURITY_NAME_MAX + 1] =
CONFIG_DEFAULT_SECURITY;
- static struct security_operations *security_ops;
- static struct security_operations default_security_ops = {
- .name = "default",
- };
-
- static inline int __init verify(struct security_operations *ops)
- {
- /* verify the security_operations structure exists */
- if (!ops)
- return -EINVAL;
- security_fixup_ops(ops);
- return 0;
- }
-
static void __init do_security_initcalls(void)
{
initcall_t *call;
*/
int __init security_init(void)
{
- printk(KERN_INFO "Security Framework initialized\n");
+ pr_info("Security Framework initialized\n");
- security_fixup_ops(&default_security_ops);
- security_ops = &default_security_ops;
+ /*
+ * Always load the capability module.
+ */
+ capability_add_hooks();
+ #ifdef CONFIG_SECURITY_YAMA_STACKED
+ /*
+ * If Yama is configured for stacking load it next.
+ */
+ yama_add_hooks();
+ #endif
+ /*
+ * Load the chosen module if there is one.
+ * This will also find yama if it is stacking
+ */
do_security_initcalls();
return 0;
}
- void reset_security_ops(void)
- {
- security_ops = &default_security_ops;
- }
-
/* Save user chosen LSM */
static int __init choose_lsm(char *str)
{
/**
* security_module_enable - Load given security module on boot ?
- * @ops: a pointer to the struct security_operations that is to be checked.
+ * @module: the name of the module
*
* Each LSM must pass this method before registering its own operations
* to avoid security registration races. This method may also be used
* choose an alternate LSM at boot time.
* Otherwise, return false.
*/
- int __init security_module_enable(struct security_operations *ops)
+ int __init security_module_enable(const char *module)
{
- return !strcmp(ops->name, chosen_lsm);
+ return !strcmp(module, chosen_lsm);
}
- /**
- * register_security - registers a security framework with the kernel
- * @ops: a pointer to the struct security_options that is to be registered
+ /*
+ * Hook list operation macros.
*
- * This function allows a security module to register itself with the
- * kernel security subsystem. Some rudimentary checking is done on the @ops
- * value passed to this function. You'll need to check first if your LSM
- * is allowed to register its @ops by calling security_module_enable(@ops).
+ * call_void_hook:
+ * This is a hook that does not return a value.
*
- * If there is already a security module registered with the kernel,
- * an error will be returned. Otherwise %0 is returned on success.
+ * call_int_hook:
+ * This is a hook that returns a value.
*/
- int __init register_security(struct security_operations *ops)
- {
- if (verify(ops)) {
- printk(KERN_DEBUG "%s could not verify "
- "security_operations structure.\n", __func__);
- return -EINVAL;
- }
-
- if (security_ops != &default_security_ops)
- return -EAGAIN;
- security_ops = ops;
-
- return 0;
- }
+ #define call_void_hook(FUNC, ...) \
+ do { \
+ struct security_hook_list *P; \
+ \
+ list_for_each_entry(P, &security_hook_heads.FUNC, list) \
+ P->hook.FUNC(__VA_ARGS__); \
+ } while (0)
+
+ #define call_int_hook(FUNC, IRC, ...) ({ \
+ int RC = IRC; \
+ do { \
+ struct security_hook_list *P; \
+ \
+ list_for_each_entry(P, &security_hook_heads.FUNC, list) { \
+ RC = P->hook.FUNC(__VA_ARGS__); \
+ if (RC != 0) \
+ break; \
+ } \
+ } while (0); \
+ RC; \
+ })
/* Security operations */
int security_binder_set_context_mgr(struct task_struct *mgr)
{
- return security_ops->binder_set_context_mgr(mgr);
+ return call_int_hook(binder_set_context_mgr, 0, mgr);
}
int security_binder_transaction(struct task_struct *from,
struct task_struct *to)
{
- return security_ops->binder_transaction(from, to);
+ return call_int_hook(binder_transaction, 0, from, to);
}
int security_binder_transfer_binder(struct task_struct *from,
struct task_struct *to)
{
- return security_ops->binder_transfer_binder(from, to);
+ return call_int_hook(binder_transfer_binder, 0, from, to);
}
int security_binder_transfer_file(struct task_struct *from,
struct task_struct *to, struct file *file)
{
- return security_ops->binder_transfer_file(from, to, file);
+ return call_int_hook(binder_transfer_file, 0, from, to, file);
}
int security_ptrace_access_check(struct task_struct *child, unsigned int mode)
{
- #ifdef CONFIG_SECURITY_YAMA_STACKED
- int rc;
- rc = yama_ptrace_access_check(child, mode);
- if (rc)
- return rc;
- #endif
- return security_ops->ptrace_access_check(child, mode);
+ return call_int_hook(ptrace_access_check, 0, child, mode);
}
int security_ptrace_traceme(struct task_struct *parent)
{
- #ifdef CONFIG_SECURITY_YAMA_STACKED
- int rc;
- rc = yama_ptrace_traceme(parent);
- if (rc)
- return rc;
- #endif
- return security_ops->ptrace_traceme(parent);
+ return call_int_hook(ptrace_traceme, 0, parent);
}
int security_capget(struct task_struct *target,
kernel_cap_t *inheritable,
kernel_cap_t *permitted)
{
- return security_ops->capget(target, effective, inheritable, permitted);
+ return call_int_hook(capget, 0, target,
+ effective, inheritable, permitted);
}
int security_capset(struct cred *new, const struct cred *old,
const kernel_cap_t *inheritable,
const kernel_cap_t *permitted)
{
- return security_ops->capset(new, old,
- effective, inheritable, permitted);
+ return call_int_hook(capset, 0, new, old,
+ effective, inheritable, permitted);
}
int security_capable(const struct cred *cred, struct user_namespace *ns,
int cap)
{
- return security_ops->capable(cred, ns, cap, SECURITY_CAP_AUDIT);
+ return call_int_hook(capable, 0, cred, ns, cap, SECURITY_CAP_AUDIT);
}
int security_capable_noaudit(const struct cred *cred, struct user_namespace *ns,
int cap)
{
- return security_ops->capable(cred, ns, cap, SECURITY_CAP_NOAUDIT);
+ return call_int_hook(capable, 0, cred, ns, cap, SECURITY_CAP_NOAUDIT);
}
int security_quotactl(int cmds, int type, int id, struct super_block *sb)
{
- return security_ops->quotactl(cmds, type, id, sb);
+ return call_int_hook(quotactl, 0, cmds, type, id, sb);
}
int security_quota_on(struct dentry *dentry)
{
- return security_ops->quota_on(dentry);
+ return call_int_hook(quota_on, 0, dentry);
}
int security_syslog(int type)
{
- return security_ops->syslog(type);
+ return call_int_hook(syslog, 0, type);
}
int security_settime(const struct timespec *ts, const struct timezone *tz)
{
- return security_ops->settime(ts, tz);
+ return call_int_hook(settime, 0, ts, tz);
}
int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
{
- return security_ops->vm_enough_memory(mm, pages);
+ struct security_hook_list *hp;
+ int cap_sys_admin = 1;
+ int rc;
+
+ /*
+ * The module will respond with a positive value if
+ * it thinks the __vm_enough_memory() call should be
+ * made with the cap_sys_admin set. If all of the modules
+ * agree that it should be set it will. If any module
+ * thinks it should not be set it won't.
+ */
+ list_for_each_entry(hp, &security_hook_heads.vm_enough_memory, list) {
+ rc = hp->hook.vm_enough_memory(mm, pages);
+ if (rc <= 0) {
+ cap_sys_admin = 0;
+ break;
+ }
+ }
+ return __vm_enough_memory(mm, pages, cap_sys_admin);
}
int security_bprm_set_creds(struct linux_binprm *bprm)
{
- return security_ops->bprm_set_creds(bprm);
+ return call_int_hook(bprm_set_creds, 0, bprm);
}
int security_bprm_check(struct linux_binprm *bprm)
{
int ret;
- ret = security_ops->bprm_check_security(bprm);
+ ret = call_int_hook(bprm_check_security, 0, bprm);
if (ret)
return ret;
return ima_bprm_check(bprm);
void security_bprm_committing_creds(struct linux_binprm *bprm)
{
- security_ops->bprm_committing_creds(bprm);
+ call_void_hook(bprm_committing_creds, bprm);
}
void security_bprm_committed_creds(struct linux_binprm *bprm)
{
- security_ops->bprm_committed_creds(bprm);
+ call_void_hook(bprm_committed_creds, bprm);
}
int security_bprm_secureexec(struct linux_binprm *bprm)
{
- return security_ops->bprm_secureexec(bprm);
+ return call_int_hook(bprm_secureexec, 0, bprm);
}
int security_sb_alloc(struct super_block *sb)
{
- return security_ops->sb_alloc_security(sb);
+ return call_int_hook(sb_alloc_security, 0, sb);
}
void security_sb_free(struct super_block *sb)
{
- security_ops->sb_free_security(sb);
+ call_void_hook(sb_free_security, sb);
}
int security_sb_copy_data(char *orig, char *copy)
{
- return security_ops->sb_copy_data(orig, copy);
+ return call_int_hook(sb_copy_data, 0, orig, copy);
}
EXPORT_SYMBOL(security_sb_copy_data);
int security_sb_remount(struct super_block *sb, void *data)
{
- return security_ops->sb_remount(sb, data);
+ return call_int_hook(sb_remount, 0, sb, data);
}
int security_sb_kern_mount(struct super_block *sb, int flags, void *data)
{
- return security_ops->sb_kern_mount(sb, flags, data);
+ return call_int_hook(sb_kern_mount, 0, sb, flags, data);
}
int security_sb_show_options(struct seq_file *m, struct super_block *sb)
{
- return security_ops->sb_show_options(m, sb);
+ return call_int_hook(sb_show_options, 0, m, sb);
}
int security_sb_statfs(struct dentry *dentry)
{
- return security_ops->sb_statfs(dentry);
+ return call_int_hook(sb_statfs, 0, dentry);
}
int security_sb_mount(const char *dev_name, struct path *path,
const char *type, unsigned long flags, void *data)
{
- return security_ops->sb_mount(dev_name, path, type, flags, data);
+ return call_int_hook(sb_mount, 0, dev_name, path, type, flags, data);
}
int security_sb_umount(struct vfsmount *mnt, int flags)
{
- return security_ops->sb_umount(mnt, flags);
+ return call_int_hook(sb_umount, 0, mnt, flags);
}
int security_sb_pivotroot(struct path *old_path, struct path *new_path)
{
- return security_ops->sb_pivotroot(old_path, new_path);
+ return call_int_hook(sb_pivotroot, 0, old_path, new_path);
}
int security_sb_set_mnt_opts(struct super_block *sb,
unsigned long kern_flags,
unsigned long *set_kern_flags)
{
- return security_ops->sb_set_mnt_opts(sb, opts, kern_flags,
- set_kern_flags);
+ return call_int_hook(sb_set_mnt_opts,
+ opts->num_mnt_opts ? -EOPNOTSUPP : 0, sb,
+ opts, kern_flags, set_kern_flags);
}
EXPORT_SYMBOL(security_sb_set_mnt_opts);
int security_sb_clone_mnt_opts(const struct super_block *oldsb,
struct super_block *newsb)
{
- return security_ops->sb_clone_mnt_opts(oldsb, newsb);
+ return call_int_hook(sb_clone_mnt_opts, 0, oldsb, newsb);
}
EXPORT_SYMBOL(security_sb_clone_mnt_opts);
int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
{
- return security_ops->sb_parse_opts_str(options, opts);
+ return call_int_hook(sb_parse_opts_str, 0, options, opts);
}
EXPORT_SYMBOL(security_sb_parse_opts_str);
int security_inode_alloc(struct inode *inode)
{
inode->i_security = NULL;
- return security_ops->inode_alloc_security(inode);
+ return call_int_hook(inode_alloc_security, 0, inode);
}
void security_inode_free(struct inode *inode)
{
integrity_inode_free(inode);
- security_ops->inode_free_security(inode);
+ call_void_hook(inode_free_security, inode);
}
int security_dentry_init_security(struct dentry *dentry, int mode,
struct qstr *name, void **ctx,
u32 *ctxlen)
{
- return security_ops->dentry_init_security(dentry, mode, name,
- ctx, ctxlen);
+ return call_int_hook(dentry_init_security, -EOPNOTSUPP, dentry, mode,
+ name, ctx, ctxlen);
}
EXPORT_SYMBOL(security_dentry_init_security);
return 0;
if (!initxattrs)
- return security_ops->inode_init_security(inode, dir, qstr,
+ return call_int_hook(inode_init_security, 0, inode, dir, qstr,
NULL, NULL, NULL);
memset(new_xattrs, 0, sizeof(new_xattrs));
lsm_xattr = new_xattrs;
- ret = security_ops->inode_init_security(inode, dir, qstr,
+ ret = call_int_hook(inode_init_security, -EOPNOTSUPP, inode, dir, qstr,
&lsm_xattr->name,
&lsm_xattr->value,
&lsm_xattr->value_len);
{
if (unlikely(IS_PRIVATE(inode)))
return -EOPNOTSUPP;
- return security_ops->inode_init_security(inode, dir, qstr, name, value,
- len);
+ return call_int_hook(inode_init_security, 0, inode, dir, qstr,
+ name, value, len);
}
EXPORT_SYMBOL(security_old_inode_init_security);
{
if (unlikely(IS_PRIVATE(d_backing_inode(dir->dentry))))
return 0;
- return security_ops->path_mknod(dir, dentry, mode, dev);
+ return call_int_hook(path_mknod, 0, dir, dentry, mode, dev);
}
EXPORT_SYMBOL(security_path_mknod);
{
if (unlikely(IS_PRIVATE(d_backing_inode(dir->dentry))))
return 0;
- return security_ops->path_mkdir(dir, dentry, mode);
+ return call_int_hook(path_mkdir, 0, dir, dentry, mode);
}
EXPORT_SYMBOL(security_path_mkdir);
{
if (unlikely(IS_PRIVATE(d_backing_inode(dir->dentry))))
return 0;
- return security_ops->path_rmdir(dir, dentry);
+ return call_int_hook(path_rmdir, 0, dir, dentry);
}
int security_path_unlink(struct path *dir, struct dentry *dentry)
{
if (unlikely(IS_PRIVATE(d_backing_inode(dir->dentry))))
return 0;
- return security_ops->path_unlink(dir, dentry);
+ return call_int_hook(path_unlink, 0, dir, dentry);
}
EXPORT_SYMBOL(security_path_unlink);
{
if (unlikely(IS_PRIVATE(d_backing_inode(dir->dentry))))
return 0;
- return security_ops->path_symlink(dir, dentry, old_name);
+ return call_int_hook(path_symlink, 0, dir, dentry, old_name);
}
int security_path_link(struct dentry *old_dentry, struct path *new_dir,
{
if (unlikely(IS_PRIVATE(d_backing_inode(old_dentry))))
return 0;
- return security_ops->path_link(old_dentry, new_dir, new_dentry);
+ return call_int_hook(path_link, 0, old_dentry, new_dir, new_dentry);
}
int security_path_rename(struct path *old_dir, struct dentry *old_dentry,
return 0;
if (flags & RENAME_EXCHANGE) {
- int err = security_ops->path_rename(new_dir, new_dentry,
- old_dir, old_dentry);
+ int err = call_int_hook(path_rename, 0, new_dir, new_dentry,
+ old_dir, old_dentry);
if (err)
return err;
}
- return security_ops->path_rename(old_dir, old_dentry, new_dir,
- new_dentry);
+ return call_int_hook(path_rename, 0, old_dir, old_dentry, new_dir,
+ new_dentry);
}
EXPORT_SYMBOL(security_path_rename);
{
if (unlikely(IS_PRIVATE(d_backing_inode(path->dentry))))
return 0;
- return security_ops->path_truncate(path);
+ return call_int_hook(path_truncate, 0, path);
}
int security_path_chmod(struct path *path, umode_t mode)
{
if (unlikely(IS_PRIVATE(d_backing_inode(path->dentry))))
return 0;
- return security_ops->path_chmod(path, mode);
+ return call_int_hook(path_chmod, 0, path, mode);
}
int security_path_chown(struct path *path, kuid_t uid, kgid_t gid)
{
if (unlikely(IS_PRIVATE(d_backing_inode(path->dentry))))
return 0;
- return security_ops->path_chown(path, uid, gid);
+ return call_int_hook(path_chown, 0, path, uid, gid);
}
int security_path_chroot(struct path *path)
{
- return security_ops->path_chroot(path);
+ return call_int_hook(path_chroot, 0, path);
}
#endif
{
if (unlikely(IS_PRIVATE(dir)))
return 0;
- return security_ops->inode_create(dir, dentry, mode);
+ return call_int_hook(inode_create, 0, dir, dentry, mode);
}
EXPORT_SYMBOL_GPL(security_inode_create);
{
if (unlikely(IS_PRIVATE(d_backing_inode(old_dentry))))
return 0;
- return security_ops->inode_link(old_dentry, dir, new_dentry);
+ return call_int_hook(inode_link, 0, old_dentry, dir, new_dentry);
}
int security_inode_unlink(struct inode *dir, struct dentry *dentry)
{
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return 0;
- return security_ops->inode_unlink(dir, dentry);
+ return call_int_hook(inode_unlink, 0, dir, dentry);
}
int security_inode_symlink(struct inode *dir, struct dentry *dentry,
{
if (unlikely(IS_PRIVATE(dir)))
return 0;
- return security_ops->inode_symlink(dir, dentry, old_name);
+ return call_int_hook(inode_symlink, 0, dir, dentry, old_name);
}
int security_inode_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
{
if (unlikely(IS_PRIVATE(dir)))
return 0;
- return security_ops->inode_mkdir(dir, dentry, mode);
+ return call_int_hook(inode_mkdir, 0, dir, dentry, mode);
}
EXPORT_SYMBOL_GPL(security_inode_mkdir);
{
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return 0;
- return security_ops->inode_rmdir(dir, dentry);
+ return call_int_hook(inode_rmdir, 0, dir, dentry);
}
int security_inode_mknod(struct inode *dir, struct dentry *dentry, umode_t mode, dev_t dev)
{
if (unlikely(IS_PRIVATE(dir)))
return 0;
- return security_ops->inode_mknod(dir, dentry, mode, dev);
+ return call_int_hook(inode_mknod, 0, dir, dentry, mode, dev);
}
int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry,
return 0;
if (flags & RENAME_EXCHANGE) {
- int err = security_ops->inode_rename(new_dir, new_dentry,
+ int err = call_int_hook(inode_rename, 0, new_dir, new_dentry,
old_dir, old_dentry);
if (err)
return err;
}
- return security_ops->inode_rename(old_dir, old_dentry,
+ return call_int_hook(inode_rename, 0, old_dir, old_dentry,
new_dir, new_dentry);
}
{
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return 0;
- return security_ops->inode_readlink(dentry);
+ return call_int_hook(inode_readlink, 0, dentry);
}
-int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd)
+int security_inode_follow_link(struct dentry *dentry, struct inode *inode,
+ bool rcu)
{
- if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
+ if (unlikely(IS_PRIVATE(inode)))
return 0;
- return security_ops->inode_follow_link(dentry, inode, rcu);
- return call_int_hook(inode_follow_link, 0, dentry, nd);
++ return call_int_hook(inode_follow_link, 0, dentry, inode, rcu);
}
int security_inode_permission(struct inode *inode, int mask)
{
if (unlikely(IS_PRIVATE(inode)))
return 0;
- return security_ops->inode_permission(inode, mask);
+ return call_int_hook(inode_permission, 0, inode, mask);
}
int security_inode_setattr(struct dentry *dentry, struct iattr *attr)
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return 0;
- ret = security_ops->inode_setattr(dentry, attr);
+ ret = call_int_hook(inode_setattr, 0, dentry, attr);
if (ret)
return ret;
return evm_inode_setattr(dentry, attr);
{
if (unlikely(IS_PRIVATE(d_backing_inode(path->dentry))))
return 0;
- return security_ops->inode_getattr(path);
+ return call_int_hook(inode_getattr, 0, path);
}
int security_inode_setxattr(struct dentry *dentry, const char *name,
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return 0;
- ret = security_ops->inode_setxattr(dentry, name, value, size, flags);
+ /*
+ * SELinux and Smack integrate the cap call,
+ * so assume that all LSMs supplying this call do so.
+ */
+ ret = call_int_hook(inode_setxattr, 1, dentry, name, value, size,
+ flags);
+
+ if (ret == 1)
+ ret = cap_inode_setxattr(dentry, name, value, size, flags);
if (ret)
return ret;
ret = ima_inode_setxattr(dentry, name, value, size);
{
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return;
- security_ops->inode_post_setxattr(dentry, name, value, size, flags);
+ call_void_hook(inode_post_setxattr, dentry, name, value, size, flags);
evm_inode_post_setxattr(dentry, name, value, size);
}
{
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return 0;
- return security_ops->inode_getxattr(dentry, name);
+ return call_int_hook(inode_getxattr, 0, dentry, name);
}
int security_inode_listxattr(struct dentry *dentry)
{
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return 0;
- return security_ops->inode_listxattr(dentry);
+ return call_int_hook(inode_listxattr, 0, dentry);
}
int security_inode_removexattr(struct dentry *dentry, const char *name)
if (unlikely(IS_PRIVATE(d_backing_inode(dentry))))
return 0;
- ret = security_ops->inode_removexattr(dentry, name);
+ /*
+ * SELinux and Smack integrate the cap call,
+ * so assume that all LSMs supplying this call do so.
+ */
+ ret = call_int_hook(inode_removexattr, 1, dentry, name);
+ if (ret == 1)
+ ret = cap_inode_removexattr(dentry, name);
if (ret)
return ret;
ret = ima_inode_removexattr(dentry, name);
int security_inode_need_killpriv(struct dentry *dentry)
{
- return security_ops->inode_need_killpriv(dentry);
+ return call_int_hook(inode_need_killpriv, 0, dentry);
}
int security_inode_killpriv(struct dentry *dentry)
{
- return security_ops->inode_killpriv(dentry);
+ return call_int_hook(inode_killpriv, 0, dentry);
}
int security_inode_getsecurity(const struct inode *inode, const char *name, void **buffer, bool alloc)
{
if (unlikely(IS_PRIVATE(inode)))
return -EOPNOTSUPP;
- return security_ops->inode_getsecurity(inode, name, buffer, alloc);
+ return call_int_hook(inode_getsecurity, -EOPNOTSUPP, inode, name,
+ buffer, alloc);
}
int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags)
{
if (unlikely(IS_PRIVATE(inode)))
return -EOPNOTSUPP;
- return security_ops->inode_setsecurity(inode, name, value, size, flags);
+ return call_int_hook(inode_setsecurity, -EOPNOTSUPP, inode, name,
+ value, size, flags);
}
int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size)
{
if (unlikely(IS_PRIVATE(inode)))
return 0;
- return security_ops->inode_listsecurity(inode, buffer, buffer_size);
+ return call_int_hook(inode_listsecurity, 0, inode, buffer, buffer_size);
}
EXPORT_SYMBOL(security_inode_listsecurity);
void security_inode_getsecid(const struct inode *inode, u32 *secid)
{
- security_ops->inode_getsecid(inode, secid);
+ call_void_hook(inode_getsecid, inode, secid);
}
int security_file_permission(struct file *file, int mask)
{
int ret;
- ret = security_ops->file_permission(file, mask);
+ ret = call_int_hook(file_permission, 0, file, mask);
if (ret)
return ret;
int security_file_alloc(struct file *file)
{
- return security_ops->file_alloc_security(file);
+ return call_int_hook(file_alloc_security, 0, file);
}
void security_file_free(struct file *file)
{
- security_ops->file_free_security(file);
+ call_void_hook(file_free_security, file);
}
int security_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
- return security_ops->file_ioctl(file, cmd, arg);
+ return call_int_hook(file_ioctl, 0, file, cmd, arg);
}
static inline unsigned long mmap_prot(struct file *file, unsigned long prot)
unsigned long flags)
{
int ret;
- ret = security_ops->mmap_file(file, prot,
+ ret = call_int_hook(mmap_file, 0, file, prot,
mmap_prot(file, prot), flags);
if (ret)
return ret;
int security_mmap_addr(unsigned long addr)
{
- return security_ops->mmap_addr(addr);
+ return call_int_hook(mmap_addr, 0, addr);
}
int security_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
unsigned long prot)
{
- return security_ops->file_mprotect(vma, reqprot, prot);
+ return call_int_hook(file_mprotect, 0, vma, reqprot, prot);
}
int security_file_lock(struct file *file, unsigned int cmd)
{
- return security_ops->file_lock(file, cmd);
+ return call_int_hook(file_lock, 0, file, cmd);
}
int security_file_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
{
- return security_ops->file_fcntl(file, cmd, arg);
+ return call_int_hook(file_fcntl, 0, file, cmd, arg);
}
void security_file_set_fowner(struct file *file)
{
- security_ops->file_set_fowner(file);
+ call_void_hook(file_set_fowner, file);
}
int security_file_send_sigiotask(struct task_struct *tsk,
struct fown_struct *fown, int sig)
{
- return security_ops->file_send_sigiotask(tsk, fown, sig);
+ return call_int_hook(file_send_sigiotask, 0, tsk, fown, sig);
}
int security_file_receive(struct file *file)
{
- return security_ops->file_receive(file);
+ return call_int_hook(file_receive, 0, file);
}
int security_file_open(struct file *file, const struct cred *cred)
{
int ret;
- ret = security_ops->file_open(file, cred);
+ ret = call_int_hook(file_open, 0, file, cred);
if (ret)
return ret;
int security_task_create(unsigned long clone_flags)
{
- return security_ops->task_create(clone_flags);
+ return call_int_hook(task_create, 0, clone_flags);
}
void security_task_free(struct task_struct *task)
{
- #ifdef CONFIG_SECURITY_YAMA_STACKED
- yama_task_free(task);
- #endif
- security_ops->task_free(task);
+ call_void_hook(task_free, task);
}
int security_cred_alloc_blank(struct cred *cred, gfp_t gfp)
{
- return security_ops->cred_alloc_blank(cred, gfp);
+ return call_int_hook(cred_alloc_blank, 0, cred, gfp);
}
void security_cred_free(struct cred *cred)
{
- security_ops->cred_free(cred);
+ call_void_hook(cred_free, cred);
}
int security_prepare_creds(struct cred *new, const struct cred *old, gfp_t gfp)
{
- return security_ops->cred_prepare(new, old, gfp);
+ return call_int_hook(cred_prepare, 0, new, old, gfp);
}
void security_transfer_creds(struct cred *new, const struct cred *old)
{
- security_ops->cred_transfer(new, old);
+ call_void_hook(cred_transfer, new, old);
}
int security_kernel_act_as(struct cred *new, u32 secid)
{
- return security_ops->kernel_act_as(new, secid);
+ return call_int_hook(kernel_act_as, 0, new, secid);
}
int security_kernel_create_files_as(struct cred *new, struct inode *inode)
{
- return security_ops->kernel_create_files_as(new, inode);
+ return call_int_hook(kernel_create_files_as, 0, new, inode);
}
int security_kernel_fw_from_file(struct file *file, char *buf, size_t size)
{
int ret;
- ret = security_ops->kernel_fw_from_file(file, buf, size);
+ ret = call_int_hook(kernel_fw_from_file, 0, file, buf, size);
if (ret)
return ret;
return ima_fw_from_file(file, buf, size);
int security_kernel_module_request(char *kmod_name)
{
- return security_ops->kernel_module_request(kmod_name);
+ return call_int_hook(kernel_module_request, 0, kmod_name);
}
int security_kernel_module_from_file(struct file *file)
{
int ret;
- ret = security_ops->kernel_module_from_file(file);
+ ret = call_int_hook(kernel_module_from_file, 0, file);
if (ret)
return ret;
return ima_module_check(file);
int security_task_fix_setuid(struct cred *new, const struct cred *old,
int flags)
{
- return security_ops->task_fix_setuid(new, old, flags);
+ return call_int_hook(task_fix_setuid, 0, new, old, flags);
}
int security_task_setpgid(struct task_struct *p, pid_t pgid)
{
- return security_ops->task_setpgid(p, pgid);
+ return call_int_hook(task_setpgid, 0, p, pgid);
}
int security_task_getpgid(struct task_struct *p)
{
- return security_ops->task_getpgid(p);
+ return call_int_hook(task_getpgid, 0, p);
}
int security_task_getsid(struct task_struct *p)
{
- return security_ops->task_getsid(p);
+ return call_int_hook(task_getsid, 0, p);
}
void security_task_getsecid(struct task_struct *p, u32 *secid)
{
- security_ops->task_getsecid(p, secid);
+ *secid = 0;
+ call_void_hook(task_getsecid, p, secid);
}
EXPORT_SYMBOL(security_task_getsecid);
int security_task_setnice(struct task_struct *p, int nice)
{
- return security_ops->task_setnice(p, nice);
+ return call_int_hook(task_setnice, 0, p, nice);
}
int security_task_setioprio(struct task_struct *p, int ioprio)
{
- return security_ops->task_setioprio(p, ioprio);
+ return call_int_hook(task_setioprio, 0, p, ioprio);
}
int security_task_getioprio(struct task_struct *p)
{
- return security_ops->task_getioprio(p);
+ return call_int_hook(task_getioprio, 0, p);
}
int security_task_setrlimit(struct task_struct *p, unsigned int resource,
struct rlimit *new_rlim)
{
- return security_ops->task_setrlimit(p, resource, new_rlim);
+ return call_int_hook(task_setrlimit, 0, p, resource, new_rlim);
}
int security_task_setscheduler(struct task_struct *p)
{
- return security_ops->task_setscheduler(p);
+ return call_int_hook(task_setscheduler, 0, p);
}
int security_task_getscheduler(struct task_struct *p)
{
- return security_ops->task_getscheduler(p);
+ return call_int_hook(task_getscheduler, 0, p);
}
int security_task_movememory(struct task_struct *p)
{
- return security_ops->task_movememory(p);
+ return call_int_hook(task_movememory, 0, p);
}
int security_task_kill(struct task_struct *p, struct siginfo *info,
int sig, u32 secid)
{
- return security_ops->task_kill(p, info, sig, secid);
+ return call_int_hook(task_kill, 0, p, info, sig, secid);
}
int security_task_wait(struct task_struct *p)
{
- return security_ops->task_wait(p);
+ return call_int_hook(task_wait, 0, p);
}
int security_task_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5)
{
- #ifdef CONFIG_SECURITY_YAMA_STACKED
- int rc;
- rc = yama_task_prctl(option, arg2, arg3, arg4, arg5);
- if (rc != -ENOSYS)
- return rc;
- #endif
- return security_ops->task_prctl(option, arg2, arg3, arg4, arg5);
+ int thisrc;
+ int rc = -ENOSYS;
+ struct security_hook_list *hp;
+
+ list_for_each_entry(hp, &security_hook_heads.task_prctl, list) {
+ thisrc = hp->hook.task_prctl(option, arg2, arg3, arg4, arg5);
+ if (thisrc != -ENOSYS) {
+ rc = thisrc;
+ if (thisrc != 0)
+ break;
+ }
+ }
+ return rc;
}
void security_task_to_inode(struct task_struct *p, struct inode *inode)
{
- security_ops->task_to_inode(p, inode);
+ call_void_hook(task_to_inode, p, inode);
}
int security_ipc_permission(struct kern_ipc_perm *ipcp, short flag)
{
- return security_ops->ipc_permission(ipcp, flag);
+ return call_int_hook(ipc_permission, 0, ipcp, flag);
}
void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid)
{
- security_ops->ipc_getsecid(ipcp, secid);
+ *secid = 0;
+ call_void_hook(ipc_getsecid, ipcp, secid);
}
int security_msg_msg_alloc(struct msg_msg *msg)
{
- return security_ops->msg_msg_alloc_security(msg);
+ return call_int_hook(msg_msg_alloc_security, 0, msg);
}
void security_msg_msg_free(struct msg_msg *msg)
{
- security_ops->msg_msg_free_security(msg);
+ call_void_hook(msg_msg_free_security, msg);
}
int security_msg_queue_alloc(struct msg_queue *msq)
{
- return security_ops->msg_queue_alloc_security(msq);
+ return call_int_hook(msg_queue_alloc_security, 0, msq);
}
void security_msg_queue_free(struct msg_queue *msq)
{
- security_ops->msg_queue_free_security(msq);
+ call_void_hook(msg_queue_free_security, msq);
}
int security_msg_queue_associate(struct msg_queue *msq, int msqflg)
{
- return security_ops->msg_queue_associate(msq, msqflg);
+ return call_int_hook(msg_queue_associate, 0, msq, msqflg);
}
int security_msg_queue_msgctl(struct msg_queue *msq, int cmd)
{
- return security_ops->msg_queue_msgctl(msq, cmd);
+ return call_int_hook(msg_queue_msgctl, 0, msq, cmd);
}
int security_msg_queue_msgsnd(struct msg_queue *msq,
struct msg_msg *msg, int msqflg)
{
- return security_ops->msg_queue_msgsnd(msq, msg, msqflg);
+ return call_int_hook(msg_queue_msgsnd, 0, msq, msg, msqflg);
}
int security_msg_queue_msgrcv(struct msg_queue *msq, struct msg_msg *msg,
struct task_struct *target, long type, int mode)
{
- return security_ops->msg_queue_msgrcv(msq, msg, target, type, mode);
+ return call_int_hook(msg_queue_msgrcv, 0, msq, msg, target, type, mode);
}
int security_shm_alloc(struct shmid_kernel *shp)
{
- return security_ops->shm_alloc_security(shp);
+ return call_int_hook(shm_alloc_security, 0, shp);
}
void security_shm_free(struct shmid_kernel *shp)
{
- security_ops->shm_free_security(shp);
+ call_void_hook(shm_free_security, shp);
}
int security_shm_associate(struct shmid_kernel *shp, int shmflg)
{
- return security_ops->shm_associate(shp, shmflg);
+ return call_int_hook(shm_associate, 0, shp, shmflg);
}
int security_shm_shmctl(struct shmid_kernel *shp, int cmd)
{
- return security_ops->shm_shmctl(shp, cmd);
+ return call_int_hook(shm_shmctl, 0, shp, cmd);
}
int security_shm_shmat(struct shmid_kernel *shp, char __user *shmaddr, int shmflg)
{
- return security_ops->shm_shmat(shp, shmaddr, shmflg);
+ return call_int_hook(shm_shmat, 0, shp, shmaddr, shmflg);
}
int security_sem_alloc(struct sem_array *sma)
{
- return security_ops->sem_alloc_security(sma);
+ return call_int_hook(sem_alloc_security, 0, sma);
}
void security_sem_free(struct sem_array *sma)
{
- security_ops->sem_free_security(sma);
+ call_void_hook(sem_free_security, sma);
}
int security_sem_associate(struct sem_array *sma, int semflg)
{
- return security_ops->sem_associate(sma, semflg);
+ return call_int_hook(sem_associate, 0, sma, semflg);
}
int security_sem_semctl(struct sem_array *sma, int cmd)
{
- return security_ops->sem_semctl(sma, cmd);
+ return call_int_hook(sem_semctl, 0, sma, cmd);
}
int security_sem_semop(struct sem_array *sma, struct sembuf *sops,
unsigned nsops, int alter)
{
- return security_ops->sem_semop(sma, sops, nsops, alter);
+ return call_int_hook(sem_semop, 0, sma, sops, nsops, alter);
}
void security_d_instantiate(struct dentry *dentry, struct inode *inode)
{
if (unlikely(inode && IS_PRIVATE(inode)))
return;
- security_ops->d_instantiate(dentry, inode);
+ call_void_hook(d_instantiate, dentry, inode);
}
EXPORT_SYMBOL(security_d_instantiate);
int security_getprocattr(struct task_struct *p, char *name, char **value)
{
- return security_ops->getprocattr(p, name, value);
+ return call_int_hook(getprocattr, -EINVAL, p, name, value);
}
int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size)
{
- return security_ops->setprocattr(p, name, value, size);
+ return call_int_hook(setprocattr, -EINVAL, p, name, value, size);
}
int security_netlink_send(struct sock *sk, struct sk_buff *skb)
{
- return security_ops->netlink_send(sk, skb);
+ return call_int_hook(netlink_send, 0, sk, skb);
}
int security_ismaclabel(const char *name)
{
- return security_ops->ismaclabel(name);
+ return call_int_hook(ismaclabel, 0, name);
}
EXPORT_SYMBOL(security_ismaclabel);
int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
{
- return security_ops->secid_to_secctx(secid, secdata, seclen);
+ return call_int_hook(secid_to_secctx, -EOPNOTSUPP, secid, secdata,
+ seclen);
}
EXPORT_SYMBOL(security_secid_to_secctx);
int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid)
{
- return security_ops->secctx_to_secid(secdata, seclen, secid);
+ *secid = 0;
+ return call_int_hook(secctx_to_secid, 0, secdata, seclen, secid);
}
EXPORT_SYMBOL(security_secctx_to_secid);
void security_release_secctx(char *secdata, u32 seclen)
{
- security_ops->release_secctx(secdata, seclen);
+ call_void_hook(release_secctx, secdata, seclen);
}
EXPORT_SYMBOL(security_release_secctx);
int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
{
- return security_ops->inode_notifysecctx(inode, ctx, ctxlen);
+ return call_int_hook(inode_notifysecctx, 0, inode, ctx, ctxlen);
}
EXPORT_SYMBOL(security_inode_notifysecctx);
int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
{
- return security_ops->inode_setsecctx(dentry, ctx, ctxlen);
+ return call_int_hook(inode_setsecctx, 0, dentry, ctx, ctxlen);
}
EXPORT_SYMBOL(security_inode_setsecctx);
int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
{
- return security_ops->inode_getsecctx(inode, ctx, ctxlen);
+ return call_int_hook(inode_getsecctx, -EOPNOTSUPP, inode, ctx, ctxlen);
}
EXPORT_SYMBOL(security_inode_getsecctx);
int security_unix_stream_connect(struct sock *sock, struct sock *other, struct sock *newsk)
{
- return security_ops->unix_stream_connect(sock, other, newsk);
+ return call_int_hook(unix_stream_connect, 0, sock, other, newsk);
}
EXPORT_SYMBOL(security_unix_stream_connect);
int security_unix_may_send(struct socket *sock, struct socket *other)
{
- return security_ops->unix_may_send(sock, other);
+ return call_int_hook(unix_may_send, 0, sock, other);
}
EXPORT_SYMBOL(security_unix_may_send);
int security_socket_create(int family, int type, int protocol, int kern)
{
- return security_ops->socket_create(family, type, protocol, kern);
+ return call_int_hook(socket_create, 0, family, type, protocol, kern);
}
int security_socket_post_create(struct socket *sock, int family,
int type, int protocol, int kern)
{
- return security_ops->socket_post_create(sock, family, type,
+ return call_int_hook(socket_post_create, 0, sock, family, type,
protocol, kern);
}
int security_socket_bind(struct socket *sock, struct sockaddr *address, int addrlen)
{
- return security_ops->socket_bind(sock, address, addrlen);
+ return call_int_hook(socket_bind, 0, sock, address, addrlen);
}
int security_socket_connect(struct socket *sock, struct sockaddr *address, int addrlen)
{
- return security_ops->socket_connect(sock, address, addrlen);
+ return call_int_hook(socket_connect, 0, sock, address, addrlen);
}
int security_socket_listen(struct socket *sock, int backlog)
{
- return security_ops->socket_listen(sock, backlog);
+ return call_int_hook(socket_listen, 0, sock, backlog);
}
int security_socket_accept(struct socket *sock, struct socket *newsock)
{
- return security_ops->socket_accept(sock, newsock);
+ return call_int_hook(socket_accept, 0, sock, newsock);
}
int security_socket_sendmsg(struct socket *sock, struct msghdr *msg, int size)
{
- return security_ops->socket_sendmsg(sock, msg, size);
+ return call_int_hook(socket_sendmsg, 0, sock, msg, size);
}
int security_socket_recvmsg(struct socket *sock, struct msghdr *msg,
int size, int flags)
{
- return security_ops->socket_recvmsg(sock, msg, size, flags);
+ return call_int_hook(socket_recvmsg, 0, sock, msg, size, flags);
}
int security_socket_getsockname(struct socket *sock)
{
- return security_ops->socket_getsockname(sock);
+ return call_int_hook(socket_getsockname, 0, sock);
}
int security_socket_getpeername(struct socket *sock)
{
- return security_ops->socket_getpeername(sock);
+ return call_int_hook(socket_getpeername, 0, sock);
}
int security_socket_getsockopt(struct socket *sock, int level, int optname)
{
- return security_ops->socket_getsockopt(sock, level, optname);
+ return call_int_hook(socket_getsockopt, 0, sock, level, optname);
}
int security_socket_setsockopt(struct socket *sock, int level, int optname)
{
- return security_ops->socket_setsockopt(sock, level, optname);
+ return call_int_hook(socket_setsockopt, 0, sock, level, optname);
}
int security_socket_shutdown(struct socket *sock, int how)
{
- return security_ops->socket_shutdown(sock, how);
+ return call_int_hook(socket_shutdown, 0, sock, how);
}
int security_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
{
- return security_ops->socket_sock_rcv_skb(sk, skb);
+ return call_int_hook(socket_sock_rcv_skb, 0, sk, skb);
}
EXPORT_SYMBOL(security_sock_rcv_skb);
int security_socket_getpeersec_stream(struct socket *sock, char __user *optval,
int __user *optlen, unsigned len)
{
- return security_ops->socket_getpeersec_stream(sock, optval, optlen, len);
+ return call_int_hook(socket_getpeersec_stream, -ENOPROTOOPT, sock,
+ optval, optlen, len);
}
int security_socket_getpeersec_dgram(struct socket *sock, struct sk_buff *skb, u32 *secid)
{
- return security_ops->socket_getpeersec_dgram(sock, skb, secid);
+ return call_int_hook(socket_getpeersec_dgram, 0, sock, skb, secid);
}
EXPORT_SYMBOL(security_socket_getpeersec_dgram);
int security_sk_alloc(struct sock *sk, int family, gfp_t priority)
{
- return security_ops->sk_alloc_security(sk, family, priority);
+ return call_int_hook(sk_alloc_security, 0, sk, family, priority);
}
void security_sk_free(struct sock *sk)
{
- security_ops->sk_free_security(sk);
+ call_void_hook(sk_free_security, sk);
}
void security_sk_clone(const struct sock *sk, struct sock *newsk)
{
- security_ops->sk_clone_security(sk, newsk);
+ call_void_hook(sk_clone_security, sk, newsk);
}
EXPORT_SYMBOL(security_sk_clone);
void security_sk_classify_flow(struct sock *sk, struct flowi *fl)
{
- security_ops->sk_getsecid(sk, &fl->flowi_secid);
+ call_void_hook(sk_getsecid, sk, &fl->flowi_secid);
}
EXPORT_SYMBOL(security_sk_classify_flow);
void security_req_classify_flow(const struct request_sock *req, struct flowi *fl)
{
- security_ops->req_classify_flow(req, fl);
+ call_void_hook(req_classify_flow, req, fl);
}
EXPORT_SYMBOL(security_req_classify_flow);
void security_sock_graft(struct sock *sk, struct socket *parent)
{
- security_ops->sock_graft(sk, parent);
+ call_void_hook(sock_graft, sk, parent);
}
EXPORT_SYMBOL(security_sock_graft);
int security_inet_conn_request(struct sock *sk,
struct sk_buff *skb, struct request_sock *req)
{
- return security_ops->inet_conn_request(sk, skb, req);
+ return call_int_hook(inet_conn_request, 0, sk, skb, req);
}
EXPORT_SYMBOL(security_inet_conn_request);
void security_inet_csk_clone(struct sock *newsk,
const struct request_sock *req)
{
- security_ops->inet_csk_clone(newsk, req);
+ call_void_hook(inet_csk_clone, newsk, req);
}
void security_inet_conn_established(struct sock *sk,
struct sk_buff *skb)
{
- security_ops->inet_conn_established(sk, skb);
+ call_void_hook(inet_conn_established, sk, skb);
}
int security_secmark_relabel_packet(u32 secid)
{
- return security_ops->secmark_relabel_packet(secid);
+ return call_int_hook(secmark_relabel_packet, 0, secid);
}
EXPORT_SYMBOL(security_secmark_relabel_packet);
void security_secmark_refcount_inc(void)
{
- security_ops->secmark_refcount_inc();
+ call_void_hook(secmark_refcount_inc);
}
EXPORT_SYMBOL(security_secmark_refcount_inc);
void security_secmark_refcount_dec(void)
{
- security_ops->secmark_refcount_dec();
+ call_void_hook(secmark_refcount_dec);
}
EXPORT_SYMBOL(security_secmark_refcount_dec);
int security_tun_dev_alloc_security(void **security)
{
- return security_ops->tun_dev_alloc_security(security);
+ return call_int_hook(tun_dev_alloc_security, 0, security);
}
EXPORT_SYMBOL(security_tun_dev_alloc_security);
void security_tun_dev_free_security(void *security)
{
- security_ops->tun_dev_free_security(security);
+ call_void_hook(tun_dev_free_security, security);
}
EXPORT_SYMBOL(security_tun_dev_free_security);
int security_tun_dev_create(void)
{
- return security_ops->tun_dev_create();
+ return call_int_hook(tun_dev_create, 0);
}
EXPORT_SYMBOL(security_tun_dev_create);
int security_tun_dev_attach_queue(void *security)
{
- return security_ops->tun_dev_attach_queue(security);
+ return call_int_hook(tun_dev_attach_queue, 0, security);
}
EXPORT_SYMBOL(security_tun_dev_attach_queue);
int security_tun_dev_attach(struct sock *sk, void *security)
{
- return security_ops->tun_dev_attach(sk, security);
+ return call_int_hook(tun_dev_attach, 0, sk, security);
}
EXPORT_SYMBOL(security_tun_dev_attach);
int security_tun_dev_open(void *security)
{
- return security_ops->tun_dev_open(security);
+ return call_int_hook(tun_dev_open, 0, security);
}
EXPORT_SYMBOL(security_tun_dev_open);
struct xfrm_user_sec_ctx *sec_ctx,
gfp_t gfp)
{
- return security_ops->xfrm_policy_alloc_security(ctxp, sec_ctx, gfp);
+ return call_int_hook(xfrm_policy_alloc_security, 0, ctxp, sec_ctx, gfp);
}
EXPORT_SYMBOL(security_xfrm_policy_alloc);
int security_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx,
struct xfrm_sec_ctx **new_ctxp)
{
- return security_ops->xfrm_policy_clone_security(old_ctx, new_ctxp);
+ return call_int_hook(xfrm_policy_clone_security, 0, old_ctx, new_ctxp);
}
void security_xfrm_policy_free(struct xfrm_sec_ctx *ctx)
{
- security_ops->xfrm_policy_free_security(ctx);
+ call_void_hook(xfrm_policy_free_security, ctx);
}
EXPORT_SYMBOL(security_xfrm_policy_free);
int security_xfrm_policy_delete(struct xfrm_sec_ctx *ctx)
{
- return security_ops->xfrm_policy_delete_security(ctx);
+ return call_int_hook(xfrm_policy_delete_security, 0, ctx);
}
int security_xfrm_state_alloc(struct xfrm_state *x,
struct xfrm_user_sec_ctx *sec_ctx)
{
- return security_ops->xfrm_state_alloc(x, sec_ctx);
+ return call_int_hook(xfrm_state_alloc, 0, x, sec_ctx);
}
EXPORT_SYMBOL(security_xfrm_state_alloc);
int security_xfrm_state_alloc_acquire(struct xfrm_state *x,
struct xfrm_sec_ctx *polsec, u32 secid)
{
- return security_ops->xfrm_state_alloc_acquire(x, polsec, secid);
+ return call_int_hook(xfrm_state_alloc_acquire, 0, x, polsec, secid);
}
int security_xfrm_state_delete(struct xfrm_state *x)
{
- return security_ops->xfrm_state_delete_security(x);
+ return call_int_hook(xfrm_state_delete_security, 0, x);
}
EXPORT_SYMBOL(security_xfrm_state_delete);
void security_xfrm_state_free(struct xfrm_state *x)
{
- security_ops->xfrm_state_free_security(x);
+ call_void_hook(xfrm_state_free_security, x);
}
int security_xfrm_policy_lookup(struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir)
{
- return security_ops->xfrm_policy_lookup(ctx, fl_secid, dir);
+ return call_int_hook(xfrm_policy_lookup, 0, ctx, fl_secid, dir);
}
int security_xfrm_state_pol_flow_match(struct xfrm_state *x,
struct xfrm_policy *xp,
const struct flowi *fl)
{
- return security_ops->xfrm_state_pol_flow_match(x, xp, fl);
+ struct security_hook_list *hp;
+ int rc = 1;
+
+ /*
+ * Since this function is expected to return 0 or 1, the judgment
+ * becomes difficult if multiple LSMs supply this call. Fortunately,
+ * we can use the first LSM's judgment because currently only SELinux
+ * supplies this call.
+ *
+ * For speed optimization, we explicitly break the loop rather than
+ * using the macro
+ */
+ list_for_each_entry(hp, &security_hook_heads.xfrm_state_pol_flow_match,
+ list) {
+ rc = hp->hook.xfrm_state_pol_flow_match(x, xp, fl);
+ break;
+ }
+ return rc;
}
int security_xfrm_decode_session(struct sk_buff *skb, u32 *secid)
{
- return security_ops->xfrm_decode_session(skb, secid, 1);
+ return call_int_hook(xfrm_decode_session, 0, skb, secid, 1);
}
void security_skb_classify_flow(struct sk_buff *skb, struct flowi *fl)
{
- int rc = security_ops->xfrm_decode_session(skb, &fl->flowi_secid, 0);
+ int rc = call_int_hook(xfrm_decode_session, 0, skb, &fl->flowi_secid,
+ 0);
BUG_ON(rc);
}
int security_key_alloc(struct key *key, const struct cred *cred,
unsigned long flags)
{
- return security_ops->key_alloc(key, cred, flags);
+ return call_int_hook(key_alloc, 0, key, cred, flags);
}
void security_key_free(struct key *key)
{
- security_ops->key_free(key);
+ call_void_hook(key_free, key);
}
int security_key_permission(key_ref_t key_ref,
const struct cred *cred, unsigned perm)
{
- return security_ops->key_permission(key_ref, cred, perm);
+ return call_int_hook(key_permission, 0, key_ref, cred, perm);
}
int security_key_getsecurity(struct key *key, char **_buffer)
{
- return security_ops->key_getsecurity(key, _buffer);
+ *_buffer = NULL;
+ return call_int_hook(key_getsecurity, 0, key, _buffer);
}
#endif /* CONFIG_KEYS */
int security_audit_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule)
{
- return security_ops->audit_rule_init(field, op, rulestr, lsmrule);
+ return call_int_hook(audit_rule_init, 0, field, op, rulestr, lsmrule);
}
int security_audit_rule_known(struct audit_krule *krule)
{
- return security_ops->audit_rule_known(krule);
+ return call_int_hook(audit_rule_known, 0, krule);
}
void security_audit_rule_free(void *lsmrule)
{
- security_ops->audit_rule_free(lsmrule);
+ call_void_hook(audit_rule_free, lsmrule);
}
int security_audit_rule_match(u32 secid, u32 field, u32 op, void *lsmrule,
struct audit_context *actx)
{
- return security_ops->audit_rule_match(secid, field, op, lsmrule, actx);
+ return call_int_hook(audit_rule_match, 0, secid, field, op, lsmrule,
+ actx);
}
+ #endif /* CONFIG_AUDIT */
+ struct security_hook_heads security_hook_heads = {
+ .binder_set_context_mgr =
+ LIST_HEAD_INIT(security_hook_heads.binder_set_context_mgr),
+ .binder_transaction =
+ LIST_HEAD_INIT(security_hook_heads.binder_transaction),
+ .binder_transfer_binder =
+ LIST_HEAD_INIT(security_hook_heads.binder_transfer_binder),
+ .binder_transfer_file =
+ LIST_HEAD_INIT(security_hook_heads.binder_transfer_file),
+
+ .ptrace_access_check =
+ LIST_HEAD_INIT(security_hook_heads.ptrace_access_check),
+ .ptrace_traceme =
+ LIST_HEAD_INIT(security_hook_heads.ptrace_traceme),
+ .capget = LIST_HEAD_INIT(security_hook_heads.capget),
+ .capset = LIST_HEAD_INIT(security_hook_heads.capset),
+ .capable = LIST_HEAD_INIT(security_hook_heads.capable),
+ .quotactl = LIST_HEAD_INIT(security_hook_heads.quotactl),
+ .quota_on = LIST_HEAD_INIT(security_hook_heads.quota_on),
+ .syslog = LIST_HEAD_INIT(security_hook_heads.syslog),
+ .settime = LIST_HEAD_INIT(security_hook_heads.settime),
+ .vm_enough_memory =
+ LIST_HEAD_INIT(security_hook_heads.vm_enough_memory),
+ .bprm_set_creds =
+ LIST_HEAD_INIT(security_hook_heads.bprm_set_creds),
+ .bprm_check_security =
+ LIST_HEAD_INIT(security_hook_heads.bprm_check_security),
+ .bprm_secureexec =
+ LIST_HEAD_INIT(security_hook_heads.bprm_secureexec),
+ .bprm_committing_creds =
+ LIST_HEAD_INIT(security_hook_heads.bprm_committing_creds),
+ .bprm_committed_creds =
+ LIST_HEAD_INIT(security_hook_heads.bprm_committed_creds),
+ .sb_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.sb_alloc_security),
+ .sb_free_security =
+ LIST_HEAD_INIT(security_hook_heads.sb_free_security),
+ .sb_copy_data = LIST_HEAD_INIT(security_hook_heads.sb_copy_data),
+ .sb_remount = LIST_HEAD_INIT(security_hook_heads.sb_remount),
+ .sb_kern_mount =
+ LIST_HEAD_INIT(security_hook_heads.sb_kern_mount),
+ .sb_show_options =
+ LIST_HEAD_INIT(security_hook_heads.sb_show_options),
+ .sb_statfs = LIST_HEAD_INIT(security_hook_heads.sb_statfs),
+ .sb_mount = LIST_HEAD_INIT(security_hook_heads.sb_mount),
+ .sb_umount = LIST_HEAD_INIT(security_hook_heads.sb_umount),
+ .sb_pivotroot = LIST_HEAD_INIT(security_hook_heads.sb_pivotroot),
+ .sb_set_mnt_opts =
+ LIST_HEAD_INIT(security_hook_heads.sb_set_mnt_opts),
+ .sb_clone_mnt_opts =
+ LIST_HEAD_INIT(security_hook_heads.sb_clone_mnt_opts),
+ .sb_parse_opts_str =
+ LIST_HEAD_INIT(security_hook_heads.sb_parse_opts_str),
+ .dentry_init_security =
+ LIST_HEAD_INIT(security_hook_heads.dentry_init_security),
+ #ifdef CONFIG_SECURITY_PATH
+ .path_unlink = LIST_HEAD_INIT(security_hook_heads.path_unlink),
+ .path_mkdir = LIST_HEAD_INIT(security_hook_heads.path_mkdir),
+ .path_rmdir = LIST_HEAD_INIT(security_hook_heads.path_rmdir),
+ .path_mknod = LIST_HEAD_INIT(security_hook_heads.path_mknod),
+ .path_truncate =
+ LIST_HEAD_INIT(security_hook_heads.path_truncate),
+ .path_symlink = LIST_HEAD_INIT(security_hook_heads.path_symlink),
+ .path_link = LIST_HEAD_INIT(security_hook_heads.path_link),
+ .path_rename = LIST_HEAD_INIT(security_hook_heads.path_rename),
+ .path_chmod = LIST_HEAD_INIT(security_hook_heads.path_chmod),
+ .path_chown = LIST_HEAD_INIT(security_hook_heads.path_chown),
+ .path_chroot = LIST_HEAD_INIT(security_hook_heads.path_chroot),
+ #endif
+ .inode_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.inode_alloc_security),
+ .inode_free_security =
+ LIST_HEAD_INIT(security_hook_heads.inode_free_security),
+ .inode_init_security =
+ LIST_HEAD_INIT(security_hook_heads.inode_init_security),
+ .inode_create = LIST_HEAD_INIT(security_hook_heads.inode_create),
+ .inode_link = LIST_HEAD_INIT(security_hook_heads.inode_link),
+ .inode_unlink = LIST_HEAD_INIT(security_hook_heads.inode_unlink),
+ .inode_symlink =
+ LIST_HEAD_INIT(security_hook_heads.inode_symlink),
+ .inode_mkdir = LIST_HEAD_INIT(security_hook_heads.inode_mkdir),
+ .inode_rmdir = LIST_HEAD_INIT(security_hook_heads.inode_rmdir),
+ .inode_mknod = LIST_HEAD_INIT(security_hook_heads.inode_mknod),
+ .inode_rename = LIST_HEAD_INIT(security_hook_heads.inode_rename),
+ .inode_readlink =
+ LIST_HEAD_INIT(security_hook_heads.inode_readlink),
+ .inode_follow_link =
+ LIST_HEAD_INIT(security_hook_heads.inode_follow_link),
+ .inode_permission =
+ LIST_HEAD_INIT(security_hook_heads.inode_permission),
+ .inode_setattr =
+ LIST_HEAD_INIT(security_hook_heads.inode_setattr),
+ .inode_getattr =
+ LIST_HEAD_INIT(security_hook_heads.inode_getattr),
+ .inode_setxattr =
+ LIST_HEAD_INIT(security_hook_heads.inode_setxattr),
+ .inode_post_setxattr =
+ LIST_HEAD_INIT(security_hook_heads.inode_post_setxattr),
+ .inode_getxattr =
+ LIST_HEAD_INIT(security_hook_heads.inode_getxattr),
+ .inode_listxattr =
+ LIST_HEAD_INIT(security_hook_heads.inode_listxattr),
+ .inode_removexattr =
+ LIST_HEAD_INIT(security_hook_heads.inode_removexattr),
+ .inode_need_killpriv =
+ LIST_HEAD_INIT(security_hook_heads.inode_need_killpriv),
+ .inode_killpriv =
+ LIST_HEAD_INIT(security_hook_heads.inode_killpriv),
+ .inode_getsecurity =
+ LIST_HEAD_INIT(security_hook_heads.inode_getsecurity),
+ .inode_setsecurity =
+ LIST_HEAD_INIT(security_hook_heads.inode_setsecurity),
+ .inode_listsecurity =
+ LIST_HEAD_INIT(security_hook_heads.inode_listsecurity),
+ .inode_getsecid =
+ LIST_HEAD_INIT(security_hook_heads.inode_getsecid),
+ .file_permission =
+ LIST_HEAD_INIT(security_hook_heads.file_permission),
+ .file_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.file_alloc_security),
+ .file_free_security =
+ LIST_HEAD_INIT(security_hook_heads.file_free_security),
+ .file_ioctl = LIST_HEAD_INIT(security_hook_heads.file_ioctl),
+ .mmap_addr = LIST_HEAD_INIT(security_hook_heads.mmap_addr),
+ .mmap_file = LIST_HEAD_INIT(security_hook_heads.mmap_file),
+ .file_mprotect =
+ LIST_HEAD_INIT(security_hook_heads.file_mprotect),
+ .file_lock = LIST_HEAD_INIT(security_hook_heads.file_lock),
+ .file_fcntl = LIST_HEAD_INIT(security_hook_heads.file_fcntl),
+ .file_set_fowner =
+ LIST_HEAD_INIT(security_hook_heads.file_set_fowner),
+ .file_send_sigiotask =
+ LIST_HEAD_INIT(security_hook_heads.file_send_sigiotask),
+ .file_receive = LIST_HEAD_INIT(security_hook_heads.file_receive),
+ .file_open = LIST_HEAD_INIT(security_hook_heads.file_open),
+ .task_create = LIST_HEAD_INIT(security_hook_heads.task_create),
+ .task_free = LIST_HEAD_INIT(security_hook_heads.task_free),
+ .cred_alloc_blank =
+ LIST_HEAD_INIT(security_hook_heads.cred_alloc_blank),
+ .cred_free = LIST_HEAD_INIT(security_hook_heads.cred_free),
+ .cred_prepare = LIST_HEAD_INIT(security_hook_heads.cred_prepare),
+ .cred_transfer =
+ LIST_HEAD_INIT(security_hook_heads.cred_transfer),
+ .kernel_act_as =
+ LIST_HEAD_INIT(security_hook_heads.kernel_act_as),
+ .kernel_create_files_as =
+ LIST_HEAD_INIT(security_hook_heads.kernel_create_files_as),
+ .kernel_fw_from_file =
+ LIST_HEAD_INIT(security_hook_heads.kernel_fw_from_file),
+ .kernel_module_request =
+ LIST_HEAD_INIT(security_hook_heads.kernel_module_request),
+ .kernel_module_from_file =
+ LIST_HEAD_INIT(security_hook_heads.kernel_module_from_file),
+ .task_fix_setuid =
+ LIST_HEAD_INIT(security_hook_heads.task_fix_setuid),
+ .task_setpgid = LIST_HEAD_INIT(security_hook_heads.task_setpgid),
+ .task_getpgid = LIST_HEAD_INIT(security_hook_heads.task_getpgid),
+ .task_getsid = LIST_HEAD_INIT(security_hook_heads.task_getsid),
+ .task_getsecid =
+ LIST_HEAD_INIT(security_hook_heads.task_getsecid),
+ .task_setnice = LIST_HEAD_INIT(security_hook_heads.task_setnice),
+ .task_setioprio =
+ LIST_HEAD_INIT(security_hook_heads.task_setioprio),
+ .task_getioprio =
+ LIST_HEAD_INIT(security_hook_heads.task_getioprio),
+ .task_setrlimit =
+ LIST_HEAD_INIT(security_hook_heads.task_setrlimit),
+ .task_setscheduler =
+ LIST_HEAD_INIT(security_hook_heads.task_setscheduler),
+ .task_getscheduler =
+ LIST_HEAD_INIT(security_hook_heads.task_getscheduler),
+ .task_movememory =
+ LIST_HEAD_INIT(security_hook_heads.task_movememory),
+ .task_kill = LIST_HEAD_INIT(security_hook_heads.task_kill),
+ .task_wait = LIST_HEAD_INIT(security_hook_heads.task_wait),
+ .task_prctl = LIST_HEAD_INIT(security_hook_heads.task_prctl),
+ .task_to_inode =
+ LIST_HEAD_INIT(security_hook_heads.task_to_inode),
+ .ipc_permission =
+ LIST_HEAD_INIT(security_hook_heads.ipc_permission),
+ .ipc_getsecid = LIST_HEAD_INIT(security_hook_heads.ipc_getsecid),
+ .msg_msg_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.msg_msg_alloc_security),
+ .msg_msg_free_security =
+ LIST_HEAD_INIT(security_hook_heads.msg_msg_free_security),
+ .msg_queue_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.msg_queue_alloc_security),
+ .msg_queue_free_security =
+ LIST_HEAD_INIT(security_hook_heads.msg_queue_free_security),
+ .msg_queue_associate =
+ LIST_HEAD_INIT(security_hook_heads.msg_queue_associate),
+ .msg_queue_msgctl =
+ LIST_HEAD_INIT(security_hook_heads.msg_queue_msgctl),
+ .msg_queue_msgsnd =
+ LIST_HEAD_INIT(security_hook_heads.msg_queue_msgsnd),
+ .msg_queue_msgrcv =
+ LIST_HEAD_INIT(security_hook_heads.msg_queue_msgrcv),
+ .shm_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.shm_alloc_security),
+ .shm_free_security =
+ LIST_HEAD_INIT(security_hook_heads.shm_free_security),
+ .shm_associate =
+ LIST_HEAD_INIT(security_hook_heads.shm_associate),
+ .shm_shmctl = LIST_HEAD_INIT(security_hook_heads.shm_shmctl),
+ .shm_shmat = LIST_HEAD_INIT(security_hook_heads.shm_shmat),
+ .sem_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.sem_alloc_security),
+ .sem_free_security =
+ LIST_HEAD_INIT(security_hook_heads.sem_free_security),
+ .sem_associate =
+ LIST_HEAD_INIT(security_hook_heads.sem_associate),
+ .sem_semctl = LIST_HEAD_INIT(security_hook_heads.sem_semctl),
+ .sem_semop = LIST_HEAD_INIT(security_hook_heads.sem_semop),
+ .netlink_send = LIST_HEAD_INIT(security_hook_heads.netlink_send),
+ .d_instantiate =
+ LIST_HEAD_INIT(security_hook_heads.d_instantiate),
+ .getprocattr = LIST_HEAD_INIT(security_hook_heads.getprocattr),
+ .setprocattr = LIST_HEAD_INIT(security_hook_heads.setprocattr),
+ .ismaclabel = LIST_HEAD_INIT(security_hook_heads.ismaclabel),
+ .secid_to_secctx =
+ LIST_HEAD_INIT(security_hook_heads.secid_to_secctx),
+ .secctx_to_secid =
+ LIST_HEAD_INIT(security_hook_heads.secctx_to_secid),
+ .release_secctx =
+ LIST_HEAD_INIT(security_hook_heads.release_secctx),
+ .inode_notifysecctx =
+ LIST_HEAD_INIT(security_hook_heads.inode_notifysecctx),
+ .inode_setsecctx =
+ LIST_HEAD_INIT(security_hook_heads.inode_setsecctx),
+ .inode_getsecctx =
+ LIST_HEAD_INIT(security_hook_heads.inode_getsecctx),
+ #ifdef CONFIG_SECURITY_NETWORK
+ .unix_stream_connect =
+ LIST_HEAD_INIT(security_hook_heads.unix_stream_connect),
+ .unix_may_send =
+ LIST_HEAD_INIT(security_hook_heads.unix_may_send),
+ .socket_create =
+ LIST_HEAD_INIT(security_hook_heads.socket_create),
+ .socket_post_create =
+ LIST_HEAD_INIT(security_hook_heads.socket_post_create),
+ .socket_bind = LIST_HEAD_INIT(security_hook_heads.socket_bind),
+ .socket_connect =
+ LIST_HEAD_INIT(security_hook_heads.socket_connect),
+ .socket_listen =
+ LIST_HEAD_INIT(security_hook_heads.socket_listen),
+ .socket_accept =
+ LIST_HEAD_INIT(security_hook_heads.socket_accept),
+ .socket_sendmsg =
+ LIST_HEAD_INIT(security_hook_heads.socket_sendmsg),
+ .socket_recvmsg =
+ LIST_HEAD_INIT(security_hook_heads.socket_recvmsg),
+ .socket_getsockname =
+ LIST_HEAD_INIT(security_hook_heads.socket_getsockname),
+ .socket_getpeername =
+ LIST_HEAD_INIT(security_hook_heads.socket_getpeername),
+ .socket_getsockopt =
+ LIST_HEAD_INIT(security_hook_heads.socket_getsockopt),
+ .socket_setsockopt =
+ LIST_HEAD_INIT(security_hook_heads.socket_setsockopt),
+ .socket_shutdown =
+ LIST_HEAD_INIT(security_hook_heads.socket_shutdown),
+ .socket_sock_rcv_skb =
+ LIST_HEAD_INIT(security_hook_heads.socket_sock_rcv_skb),
+ .socket_getpeersec_stream =
+ LIST_HEAD_INIT(security_hook_heads.socket_getpeersec_stream),
+ .socket_getpeersec_dgram =
+ LIST_HEAD_INIT(security_hook_heads.socket_getpeersec_dgram),
+ .sk_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.sk_alloc_security),
+ .sk_free_security =
+ LIST_HEAD_INIT(security_hook_heads.sk_free_security),
+ .sk_clone_security =
+ LIST_HEAD_INIT(security_hook_heads.sk_clone_security),
+ .sk_getsecid = LIST_HEAD_INIT(security_hook_heads.sk_getsecid),
+ .sock_graft = LIST_HEAD_INIT(security_hook_heads.sock_graft),
+ .inet_conn_request =
+ LIST_HEAD_INIT(security_hook_heads.inet_conn_request),
+ .inet_csk_clone =
+ LIST_HEAD_INIT(security_hook_heads.inet_csk_clone),
+ .inet_conn_established =
+ LIST_HEAD_INIT(security_hook_heads.inet_conn_established),
+ .secmark_relabel_packet =
+ LIST_HEAD_INIT(security_hook_heads.secmark_relabel_packet),
+ .secmark_refcount_inc =
+ LIST_HEAD_INIT(security_hook_heads.secmark_refcount_inc),
+ .secmark_refcount_dec =
+ LIST_HEAD_INIT(security_hook_heads.secmark_refcount_dec),
+ .req_classify_flow =
+ LIST_HEAD_INIT(security_hook_heads.req_classify_flow),
+ .tun_dev_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.tun_dev_alloc_security),
+ .tun_dev_free_security =
+ LIST_HEAD_INIT(security_hook_heads.tun_dev_free_security),
+ .tun_dev_create =
+ LIST_HEAD_INIT(security_hook_heads.tun_dev_create),
+ .tun_dev_attach_queue =
+ LIST_HEAD_INIT(security_hook_heads.tun_dev_attach_queue),
+ .tun_dev_attach =
+ LIST_HEAD_INIT(security_hook_heads.tun_dev_attach),
+ .tun_dev_open = LIST_HEAD_INIT(security_hook_heads.tun_dev_open),
+ .skb_owned_by = LIST_HEAD_INIT(security_hook_heads.skb_owned_by),
+ #endif /* CONFIG_SECURITY_NETWORK */
+ #ifdef CONFIG_SECURITY_NETWORK_XFRM
+ .xfrm_policy_alloc_security =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_policy_alloc_security),
+ .xfrm_policy_clone_security =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_policy_clone_security),
+ .xfrm_policy_free_security =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_policy_free_security),
+ .xfrm_policy_delete_security =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_policy_delete_security),
+ .xfrm_state_alloc =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_state_alloc),
+ .xfrm_state_alloc_acquire =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_state_alloc_acquire),
+ .xfrm_state_free_security =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_state_free_security),
+ .xfrm_state_delete_security =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_state_delete_security),
+ .xfrm_policy_lookup =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_policy_lookup),
+ .xfrm_state_pol_flow_match =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_state_pol_flow_match),
+ .xfrm_decode_session =
+ LIST_HEAD_INIT(security_hook_heads.xfrm_decode_session),
+ #endif /* CONFIG_SECURITY_NETWORK_XFRM */
+ #ifdef CONFIG_KEYS
+ .key_alloc = LIST_HEAD_INIT(security_hook_heads.key_alloc),
+ .key_free = LIST_HEAD_INIT(security_hook_heads.key_free),
+ .key_permission =
+ LIST_HEAD_INIT(security_hook_heads.key_permission),
+ .key_getsecurity =
+ LIST_HEAD_INIT(security_hook_heads.key_getsecurity),
+ #endif /* CONFIG_KEYS */
+ #ifdef CONFIG_AUDIT
+ .audit_rule_init =
+ LIST_HEAD_INIT(security_hook_heads.audit_rule_init),
+ .audit_rule_known =
+ LIST_HEAD_INIT(security_hook_heads.audit_rule_known),
+ .audit_rule_match =
+ LIST_HEAD_INIT(security_hook_heads.audit_rule_match),
+ .audit_rule_free =
+ LIST_HEAD_INIT(security_hook_heads.audit_rule_free),
#endif /* CONFIG_AUDIT */
+ };
#include <linux/tracehook.h>
#include <linux/errno.h>
#include <linux/sched.h>
- #include <linux/security.h>
+ #include <linux/lsm_hooks.h>
#include <linux/xattr.h>
#include <linux/capability.h>
#include <linux/unistd.h>
return sbsec->behavior == SECURITY_FS_USE_XATTR ||
sbsec->behavior == SECURITY_FS_USE_TRANS ||
sbsec->behavior == SECURITY_FS_USE_TASK ||
+ sbsec->behavior == SECURITY_FS_USE_NATIVE ||
/* Special handling. Genfs but also in-core setxattr handler */
!strcmp(sb->s_type->name, "sysfs") ||
!strcmp(sb->s_type->name, "pstore") ||
}
if (strcmp(sb->s_type->name, "proc") == 0)
- sbsec->flags |= SE_SBPROC;
+ sbsec->flags |= SE_SBPROC | SE_SBGENFS;
+
+ if (!strcmp(sb->s_type->name, "debugfs") ||
+ !strcmp(sb->s_type->name, "sysfs") ||
+ !strcmp(sb->s_type->name, "pstore"))
+ sbsec->flags |= SE_SBGENFS;
if (!sbsec->behavior) {
/*
switch (protocol) {
case NETLINK_ROUTE:
return SECCLASS_NETLINK_ROUTE_SOCKET;
- case NETLINK_FIREWALL:
- return SECCLASS_NETLINK_FIREWALL_SOCKET;
case NETLINK_SOCK_DIAG:
return SECCLASS_NETLINK_TCPDIAG_SOCKET;
case NETLINK_NFLOG:
return SECCLASS_NETLINK_XFRM_SOCKET;
case NETLINK_SELINUX:
return SECCLASS_NETLINK_SELINUX_SOCKET;
+ case NETLINK_ISCSI:
+ return SECCLASS_NETLINK_ISCSI_SOCKET;
case NETLINK_AUDIT:
return SECCLASS_NETLINK_AUDIT_SOCKET;
- case NETLINK_IP6_FW:
- return SECCLASS_NETLINK_IP6FW_SOCKET;
+ case NETLINK_FIB_LOOKUP:
+ return SECCLASS_NETLINK_FIB_LOOKUP_SOCKET;
+ case NETLINK_CONNECTOR:
+ return SECCLASS_NETLINK_CONNECTOR_SOCKET;
+ case NETLINK_NETFILTER:
+ return SECCLASS_NETLINK_NETFILTER_SOCKET;
case NETLINK_DNRTMSG:
return SECCLASS_NETLINK_DNRT_SOCKET;
case NETLINK_KOBJECT_UEVENT:
return SECCLASS_NETLINK_KOBJECT_UEVENT_SOCKET;
+ case NETLINK_GENERIC:
+ return SECCLASS_NETLINK_GENERIC_SOCKET;
+ case NETLINK_SCSITRANSPORT:
+ return SECCLASS_NETLINK_SCSITRANSPORT_SOCKET;
+ case NETLINK_RDMA:
+ return SECCLASS_NETLINK_RDMA_SOCKET;
+ case NETLINK_CRYPTO:
+ return SECCLASS_NETLINK_CRYPTO_SOCKET;
default:
return SECCLASS_NETLINK_SOCKET;
}
return SECCLASS_SOCKET;
}
- #ifdef CONFIG_PROC_FS
- static int selinux_proc_get_sid(struct dentry *dentry,
- u16 tclass,
- u32 *sid)
+ static int selinux_genfs_get_sid(struct dentry *dentry,
+ u16 tclass,
+ u16 flags,
+ u32 *sid)
{
int rc;
+ struct super_block *sb = dentry->d_inode->i_sb;
char *buffer, *path;
buffer = (char *)__get_free_page(GFP_KERNEL);
if (IS_ERR(path))
rc = PTR_ERR(path);
else {
- /* each process gets a /proc/PID/ entry. Strip off the
- * PID part to get a valid selinux labeling.
- * e.g. /proc/1/net/rpc/nfs -> /net/rpc/nfs */
- while (path[1] >= '0' && path[1] <= '9') {
- path[1] = '/';
- path++;
+ if (flags & SE_SBPROC) {
+ /* each process gets a /proc/PID/ entry. Strip off the
+ * PID part to get a valid selinux labeling.
+ * e.g. /proc/1/net/rpc/nfs -> /net/rpc/nfs */
+ while (path[1] >= '0' && path[1] <= '9') {
+ path[1] = '/';
+ path++;
+ }
}
- rc = security_genfs_sid("proc", path, tclass, sid);
+ rc = security_genfs_sid(sb->s_type->name, path, tclass, sid);
}
free_page((unsigned long)buffer);
return rc;
}
- #else
- static int selinux_proc_get_sid(struct dentry *dentry,
- u16 tclass,
- u32 *sid)
- {
- return -EINVAL;
- }
- #endif
/* The inode's security attributes must be initialized before first use. */
static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dentry)
/* Default to the fs superblock SID. */
isec->sid = sbsec->sid;
- if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) {
+ if ((sbsec->flags & SE_SBGENFS) && !S_ISLNK(inode->i_mode)) {
/* We must have a dentry to determine the label on
* procfs inodes */
if (opt_dentry)
if (!dentry)
goto out_unlock;
isec->sclass = inode_mode_to_security_class(inode->i_mode);
- rc = selinux_proc_get_sid(dentry, isec->sclass, &sid);
+ rc = selinux_genfs_get_sid(dentry, isec->sclass,
+ sbsec->flags, &sid);
dput(dentry);
if (rc)
goto out_unlock;
rc = avc_has_perm_noaudit(sid, sid, sclass, av, 0, &avd);
if (audit == SECURITY_CAP_AUDIT) {
- int rc2 = avc_audit(sid, sid, sclass, av, &avd, rc, &ad);
+ int rc2 = avc_audit(sid, sid, sclass, av, &avd, rc, &ad, 0);
if (rc2)
return rc2;
}
static int selinux_ptrace_access_check(struct task_struct *child,
unsigned int mode)
{
- int rc;
-
- rc = cap_ptrace_access_check(child, mode);
- if (rc)
- return rc;
-
if (mode & PTRACE_MODE_READ) {
u32 sid = current_sid();
u32 csid = task_sid(child);
static int selinux_ptrace_traceme(struct task_struct *parent)
{
- int rc;
-
- rc = cap_ptrace_traceme(parent);
- if (rc)
- return rc;
-
return task_has_perm(parent, current, PROCESS__PTRACE);
}
static int selinux_capget(struct task_struct *target, kernel_cap_t *effective,
kernel_cap_t *inheritable, kernel_cap_t *permitted)
{
- int error;
-
- error = current_has_perm(target, PROCESS__GETCAP);
- if (error)
- return error;
-
- return cap_capget(target, effective, inheritable, permitted);
+ return current_has_perm(target, PROCESS__GETCAP);
}
static int selinux_capset(struct cred *new, const struct cred *old,
const kernel_cap_t *inheritable,
const kernel_cap_t *permitted)
{
- int error;
-
- error = cap_capset(new, old,
- effective, inheritable, permitted);
- if (error)
- return error;
-
return cred_has_perm(old, new, PROCESS__SETCAP);
}
static int selinux_capable(const struct cred *cred, struct user_namespace *ns,
int cap, int audit)
{
- int rc;
-
- rc = cap_capable(cred, ns, cap, audit);
- if (rc)
- return rc;
-
return cred_has_capability(cred, cap, audit);
}
{
int rc, cap_sys_admin = 0;
- rc = selinux_capable(current_cred(), &init_user_ns, CAP_SYS_ADMIN,
- SECURITY_CAP_NOAUDIT);
+ rc = cred_has_capability(current_cred(), CAP_SYS_ADMIN,
+ SECURITY_CAP_NOAUDIT);
if (rc == 0)
cap_sys_admin = 1;
- return __vm_enough_memory(mm, pages, cap_sys_admin);
+ return cap_sys_admin;
}
/* binprm security operations */
struct inode *inode = file_inode(bprm->file);
int rc;
- rc = cap_bprm_set_creds(bprm);
- if (rc)
- return rc;
-
/* SELinux context only depends on initial program or script and not
* the script interpreter */
if (bprm->cred_prepared)
PROCESS__NOATSECURE, NULL);
}
- return (atsecure || cap_bprm_secureexec(bprm));
+ return !!atsecure;
}
static int match_file(const void *p, struct file *file, unsigned fd)
for (i = 0; i < 3; i++)
do_setitimer(i, &itimer, NULL);
spin_lock_irq(¤t->sighand->siglock);
- if (!(current->signal->flags & SIGNAL_GROUP_EXIT)) {
- __flush_signals(current);
+ if (!fatal_signal_pending(current)) {
+ flush_sigqueue(¤t->pending);
+ flush_sigqueue(¤t->signal->shared_pending);
flush_signal_handlers(current, 1);
sigemptyset(¤t->blocked);
+ recalc_sigpending();
}
spin_unlock_irq(¤t->sighand->siglock);
}
return dentry_has_perm(cred, dentry, FILE__READ);
}
-static int selinux_inode_follow_link(struct dentry *dentry, struct nameidata *nameidata)
+static int selinux_inode_follow_link(struct dentry *dentry, struct inode *inode,
+ bool rcu)
{
const struct cred *cred = current_cred();
+ struct common_audit_data ad;
+ struct inode_security_struct *isec;
+ u32 sid;
- return dentry_has_perm(cred, dentry, FILE__READ);
+ validate_creds(cred);
+
+ ad.type = LSM_AUDIT_DATA_DENTRY;
+ ad.u.dentry = dentry;
+ sid = cred_sid(cred);
+ isec = inode->i_security;
+
+ return avc_has_perm_flags(sid, isec->sid, isec->sclass, FILE__READ, &ad,
+ rcu ? MAY_NOT_BLOCK : 0);
}
static noinline int audit_inode_permission(struct inode *inode,
* and lack of permission just means that we fall back to the
* in-core context value, not a denial.
*/
- error = selinux_capable(current_cred(), &init_user_ns, CAP_MAC_ADMIN,
- SECURITY_CAP_NOAUDIT);
+ error = cap_capable(current_cred(), &init_user_ns, CAP_MAC_ADMIN,
+ SECURITY_CAP_NOAUDIT);
+ if (!error)
+ error = cred_has_capability(current_cred(), CAP_MAC_ADMIN,
+ SECURITY_CAP_NOAUDIT);
if (!error)
error = security_sid_to_context_force(isec->sid, &context,
&size);
static int selinux_mmap_addr(unsigned long addr)
{
- int rc;
-
- /* do DAC check on address space usage */
- rc = cap_mmap_addr(addr);
- if (rc)
- return rc;
+ int rc = 0;
if (addr < CONFIG_LSM_MMAP_MIN_ADDR) {
u32 sid = current_sid();
static int selinux_task_setnice(struct task_struct *p, int nice)
{
- int rc;
-
- rc = cap_task_setnice(p, nice);
- if (rc)
- return rc;
-
return current_has_perm(p, PROCESS__SETSCHED);
}
static int selinux_task_setioprio(struct task_struct *p, int ioprio)
{
- int rc;
-
- rc = cap_task_setioprio(p, ioprio);
- if (rc)
- return rc;
-
return current_has_perm(p, PROCESS__SETSCHED);
}
static int selinux_task_setscheduler(struct task_struct *p)
{
- int rc;
-
- rc = cap_task_setscheduler(p);
- if (rc)
- return rc;
-
return current_has_perm(p, PROCESS__SETSCHED);
}
if (err == -EINVAL) {
printk(KERN_WARNING
"SELinux: unrecognized netlink message:"
- " protocol=%hu nlmsg_type=%hu sclass=%hu\n",
- sk->sk_protocol, nlh->nlmsg_type, sksec->sclass);
+ " protocol=%hu nlmsg_type=%hu sclass=%s\n",
+ sk->sk_protocol, nlh->nlmsg_type,
+ secclass_map[sksec->sclass - 1].name);
if (!selinux_enforcing || security_get_allow_unknown())
err = 0;
}
static int selinux_netlink_send(struct sock *sk, struct sk_buff *skb)
{
- int err;
-
- err = cap_netlink_send(sk, skb);
- if (err)
- return err;
-
return selinux_nlmsg_perm(sk, skb);
}
#endif
- static struct security_operations selinux_ops = {
- .name = "selinux",
-
- .binder_set_context_mgr = selinux_binder_set_context_mgr,
- .binder_transaction = selinux_binder_transaction,
- .binder_transfer_binder = selinux_binder_transfer_binder,
- .binder_transfer_file = selinux_binder_transfer_file,
-
- .ptrace_access_check = selinux_ptrace_access_check,
- .ptrace_traceme = selinux_ptrace_traceme,
- .capget = selinux_capget,
- .capset = selinux_capset,
- .capable = selinux_capable,
- .quotactl = selinux_quotactl,
- .quota_on = selinux_quota_on,
- .syslog = selinux_syslog,
- .vm_enough_memory = selinux_vm_enough_memory,
-
- .netlink_send = selinux_netlink_send,
-
- .bprm_set_creds = selinux_bprm_set_creds,
- .bprm_committing_creds = selinux_bprm_committing_creds,
- .bprm_committed_creds = selinux_bprm_committed_creds,
- .bprm_secureexec = selinux_bprm_secureexec,
-
- .sb_alloc_security = selinux_sb_alloc_security,
- .sb_free_security = selinux_sb_free_security,
- .sb_copy_data = selinux_sb_copy_data,
- .sb_remount = selinux_sb_remount,
- .sb_kern_mount = selinux_sb_kern_mount,
- .sb_show_options = selinux_sb_show_options,
- .sb_statfs = selinux_sb_statfs,
- .sb_mount = selinux_mount,
- .sb_umount = selinux_umount,
- .sb_set_mnt_opts = selinux_set_mnt_opts,
- .sb_clone_mnt_opts = selinux_sb_clone_mnt_opts,
- .sb_parse_opts_str = selinux_parse_opts_str,
-
- .dentry_init_security = selinux_dentry_init_security,
-
- .inode_alloc_security = selinux_inode_alloc_security,
- .inode_free_security = selinux_inode_free_security,
- .inode_init_security = selinux_inode_init_security,
- .inode_create = selinux_inode_create,
- .inode_link = selinux_inode_link,
- .inode_unlink = selinux_inode_unlink,
- .inode_symlink = selinux_inode_symlink,
- .inode_mkdir = selinux_inode_mkdir,
- .inode_rmdir = selinux_inode_rmdir,
- .inode_mknod = selinux_inode_mknod,
- .inode_rename = selinux_inode_rename,
- .inode_readlink = selinux_inode_readlink,
- .inode_follow_link = selinux_inode_follow_link,
- .inode_permission = selinux_inode_permission,
- .inode_setattr = selinux_inode_setattr,
- .inode_getattr = selinux_inode_getattr,
- .inode_setxattr = selinux_inode_setxattr,
- .inode_post_setxattr = selinux_inode_post_setxattr,
- .inode_getxattr = selinux_inode_getxattr,
- .inode_listxattr = selinux_inode_listxattr,
- .inode_removexattr = selinux_inode_removexattr,
- .inode_getsecurity = selinux_inode_getsecurity,
- .inode_setsecurity = selinux_inode_setsecurity,
- .inode_listsecurity = selinux_inode_listsecurity,
- .inode_getsecid = selinux_inode_getsecid,
-
- .file_permission = selinux_file_permission,
- .file_alloc_security = selinux_file_alloc_security,
- .file_free_security = selinux_file_free_security,
- .file_ioctl = selinux_file_ioctl,
- .mmap_file = selinux_mmap_file,
- .mmap_addr = selinux_mmap_addr,
- .file_mprotect = selinux_file_mprotect,
- .file_lock = selinux_file_lock,
- .file_fcntl = selinux_file_fcntl,
- .file_set_fowner = selinux_file_set_fowner,
- .file_send_sigiotask = selinux_file_send_sigiotask,
- .file_receive = selinux_file_receive,
-
- .file_open = selinux_file_open,
-
- .task_create = selinux_task_create,
- .cred_alloc_blank = selinux_cred_alloc_blank,
- .cred_free = selinux_cred_free,
- .cred_prepare = selinux_cred_prepare,
- .cred_transfer = selinux_cred_transfer,
- .kernel_act_as = selinux_kernel_act_as,
- .kernel_create_files_as = selinux_kernel_create_files_as,
- .kernel_module_request = selinux_kernel_module_request,
- .task_setpgid = selinux_task_setpgid,
- .task_getpgid = selinux_task_getpgid,
- .task_getsid = selinux_task_getsid,
- .task_getsecid = selinux_task_getsecid,
- .task_setnice = selinux_task_setnice,
- .task_setioprio = selinux_task_setioprio,
- .task_getioprio = selinux_task_getioprio,
- .task_setrlimit = selinux_task_setrlimit,
- .task_setscheduler = selinux_task_setscheduler,
- .task_getscheduler = selinux_task_getscheduler,
- .task_movememory = selinux_task_movememory,
- .task_kill = selinux_task_kill,
- .task_wait = selinux_task_wait,
- .task_to_inode = selinux_task_to_inode,
-
- .ipc_permission = selinux_ipc_permission,
- .ipc_getsecid = selinux_ipc_getsecid,
-
- .msg_msg_alloc_security = selinux_msg_msg_alloc_security,
- .msg_msg_free_security = selinux_msg_msg_free_security,
-
- .msg_queue_alloc_security = selinux_msg_queue_alloc_security,
- .msg_queue_free_security = selinux_msg_queue_free_security,
- .msg_queue_associate = selinux_msg_queue_associate,
- .msg_queue_msgctl = selinux_msg_queue_msgctl,
- .msg_queue_msgsnd = selinux_msg_queue_msgsnd,
- .msg_queue_msgrcv = selinux_msg_queue_msgrcv,
-
- .shm_alloc_security = selinux_shm_alloc_security,
- .shm_free_security = selinux_shm_free_security,
- .shm_associate = selinux_shm_associate,
- .shm_shmctl = selinux_shm_shmctl,
- .shm_shmat = selinux_shm_shmat,
-
- .sem_alloc_security = selinux_sem_alloc_security,
- .sem_free_security = selinux_sem_free_security,
- .sem_associate = selinux_sem_associate,
- .sem_semctl = selinux_sem_semctl,
- .sem_semop = selinux_sem_semop,
-
- .d_instantiate = selinux_d_instantiate,
-
- .getprocattr = selinux_getprocattr,
- .setprocattr = selinux_setprocattr,
-
- .ismaclabel = selinux_ismaclabel,
- .secid_to_secctx = selinux_secid_to_secctx,
- .secctx_to_secid = selinux_secctx_to_secid,
- .release_secctx = selinux_release_secctx,
- .inode_notifysecctx = selinux_inode_notifysecctx,
- .inode_setsecctx = selinux_inode_setsecctx,
- .inode_getsecctx = selinux_inode_getsecctx,
-
- .unix_stream_connect = selinux_socket_unix_stream_connect,
- .unix_may_send = selinux_socket_unix_may_send,
-
- .socket_create = selinux_socket_create,
- .socket_post_create = selinux_socket_post_create,
- .socket_bind = selinux_socket_bind,
- .socket_connect = selinux_socket_connect,
- .socket_listen = selinux_socket_listen,
- .socket_accept = selinux_socket_accept,
- .socket_sendmsg = selinux_socket_sendmsg,
- .socket_recvmsg = selinux_socket_recvmsg,
- .socket_getsockname = selinux_socket_getsockname,
- .socket_getpeername = selinux_socket_getpeername,
- .socket_getsockopt = selinux_socket_getsockopt,
- .socket_setsockopt = selinux_socket_setsockopt,
- .socket_shutdown = selinux_socket_shutdown,
- .socket_sock_rcv_skb = selinux_socket_sock_rcv_skb,
- .socket_getpeersec_stream = selinux_socket_getpeersec_stream,
- .socket_getpeersec_dgram = selinux_socket_getpeersec_dgram,
- .sk_alloc_security = selinux_sk_alloc_security,
- .sk_free_security = selinux_sk_free_security,
- .sk_clone_security = selinux_sk_clone_security,
- .sk_getsecid = selinux_sk_getsecid,
- .sock_graft = selinux_sock_graft,
- .inet_conn_request = selinux_inet_conn_request,
- .inet_csk_clone = selinux_inet_csk_clone,
- .inet_conn_established = selinux_inet_conn_established,
- .secmark_relabel_packet = selinux_secmark_relabel_packet,
- .secmark_refcount_inc = selinux_secmark_refcount_inc,
- .secmark_refcount_dec = selinux_secmark_refcount_dec,
- .req_classify_flow = selinux_req_classify_flow,
- .tun_dev_alloc_security = selinux_tun_dev_alloc_security,
- .tun_dev_free_security = selinux_tun_dev_free_security,
- .tun_dev_create = selinux_tun_dev_create,
- .tun_dev_attach_queue = selinux_tun_dev_attach_queue,
- .tun_dev_attach = selinux_tun_dev_attach,
- .tun_dev_open = selinux_tun_dev_open,
+ static struct security_hook_list selinux_hooks[] = {
+ LSM_HOOK_INIT(binder_set_context_mgr, selinux_binder_set_context_mgr),
+ LSM_HOOK_INIT(binder_transaction, selinux_binder_transaction),
+ LSM_HOOK_INIT(binder_transfer_binder, selinux_binder_transfer_binder),
+ LSM_HOOK_INIT(binder_transfer_file, selinux_binder_transfer_file),
+
+ LSM_HOOK_INIT(ptrace_access_check, selinux_ptrace_access_check),
+ LSM_HOOK_INIT(ptrace_traceme, selinux_ptrace_traceme),
+ LSM_HOOK_INIT(capget, selinux_capget),
+ LSM_HOOK_INIT(capset, selinux_capset),
+ LSM_HOOK_INIT(capable, selinux_capable),
+ LSM_HOOK_INIT(quotactl, selinux_quotactl),
+ LSM_HOOK_INIT(quota_on, selinux_quota_on),
+ LSM_HOOK_INIT(syslog, selinux_syslog),
+ LSM_HOOK_INIT(vm_enough_memory, selinux_vm_enough_memory),
+
+ LSM_HOOK_INIT(netlink_send, selinux_netlink_send),
+
+ LSM_HOOK_INIT(bprm_set_creds, selinux_bprm_set_creds),
+ LSM_HOOK_INIT(bprm_committing_creds, selinux_bprm_committing_creds),
+ LSM_HOOK_INIT(bprm_committed_creds, selinux_bprm_committed_creds),
+ LSM_HOOK_INIT(bprm_secureexec, selinux_bprm_secureexec),
+
+ LSM_HOOK_INIT(sb_alloc_security, selinux_sb_alloc_security),
+ LSM_HOOK_INIT(sb_free_security, selinux_sb_free_security),
+ LSM_HOOK_INIT(sb_copy_data, selinux_sb_copy_data),
+ LSM_HOOK_INIT(sb_remount, selinux_sb_remount),
+ LSM_HOOK_INIT(sb_kern_mount, selinux_sb_kern_mount),
+ LSM_HOOK_INIT(sb_show_options, selinux_sb_show_options),
+ LSM_HOOK_INIT(sb_statfs, selinux_sb_statfs),
+ LSM_HOOK_INIT(sb_mount, selinux_mount),
+ LSM_HOOK_INIT(sb_umount, selinux_umount),
+ LSM_HOOK_INIT(sb_set_mnt_opts, selinux_set_mnt_opts),
+ LSM_HOOK_INIT(sb_clone_mnt_opts, selinux_sb_clone_mnt_opts),
+ LSM_HOOK_INIT(sb_parse_opts_str, selinux_parse_opts_str),
+
+ LSM_HOOK_INIT(dentry_init_security, selinux_dentry_init_security),
+
+ LSM_HOOK_INIT(inode_alloc_security, selinux_inode_alloc_security),
+ LSM_HOOK_INIT(inode_free_security, selinux_inode_free_security),
+ LSM_HOOK_INIT(inode_init_security, selinux_inode_init_security),
+ LSM_HOOK_INIT(inode_create, selinux_inode_create),
+ LSM_HOOK_INIT(inode_link, selinux_inode_link),
+ LSM_HOOK_INIT(inode_unlink, selinux_inode_unlink),
+ LSM_HOOK_INIT(inode_symlink, selinux_inode_symlink),
+ LSM_HOOK_INIT(inode_mkdir, selinux_inode_mkdir),
+ LSM_HOOK_INIT(inode_rmdir, selinux_inode_rmdir),
+ LSM_HOOK_INIT(inode_mknod, selinux_inode_mknod),
+ LSM_HOOK_INIT(inode_rename, selinux_inode_rename),
+ LSM_HOOK_INIT(inode_readlink, selinux_inode_readlink),
+ LSM_HOOK_INIT(inode_follow_link, selinux_inode_follow_link),
+ LSM_HOOK_INIT(inode_permission, selinux_inode_permission),
+ LSM_HOOK_INIT(inode_setattr, selinux_inode_setattr),
+ LSM_HOOK_INIT(inode_getattr, selinux_inode_getattr),
+ LSM_HOOK_INIT(inode_setxattr, selinux_inode_setxattr),
+ LSM_HOOK_INIT(inode_post_setxattr, selinux_inode_post_setxattr),
+ LSM_HOOK_INIT(inode_getxattr, selinux_inode_getxattr),
+ LSM_HOOK_INIT(inode_listxattr, selinux_inode_listxattr),
+ LSM_HOOK_INIT(inode_removexattr, selinux_inode_removexattr),
+ LSM_HOOK_INIT(inode_getsecurity, selinux_inode_getsecurity),
+ LSM_HOOK_INIT(inode_setsecurity, selinux_inode_setsecurity),
+ LSM_HOOK_INIT(inode_listsecurity, selinux_inode_listsecurity),
+ LSM_HOOK_INIT(inode_getsecid, selinux_inode_getsecid),
+
+ LSM_HOOK_INIT(file_permission, selinux_file_permission),
+ LSM_HOOK_INIT(file_alloc_security, selinux_file_alloc_security),
+ LSM_HOOK_INIT(file_free_security, selinux_file_free_security),
+ LSM_HOOK_INIT(file_ioctl, selinux_file_ioctl),
+ LSM_HOOK_INIT(mmap_file, selinux_mmap_file),
+ LSM_HOOK_INIT(mmap_addr, selinux_mmap_addr),
+ LSM_HOOK_INIT(file_mprotect, selinux_file_mprotect),
+ LSM_HOOK_INIT(file_lock, selinux_file_lock),
+ LSM_HOOK_INIT(file_fcntl, selinux_file_fcntl),
+ LSM_HOOK_INIT(file_set_fowner, selinux_file_set_fowner),
+ LSM_HOOK_INIT(file_send_sigiotask, selinux_file_send_sigiotask),
+ LSM_HOOK_INIT(file_receive, selinux_file_receive),
+
+ LSM_HOOK_INIT(file_open, selinux_file_open),
+
+ LSM_HOOK_INIT(task_create, selinux_task_create),
+ LSM_HOOK_INIT(cred_alloc_blank, selinux_cred_alloc_blank),
+ LSM_HOOK_INIT(cred_free, selinux_cred_free),
+ LSM_HOOK_INIT(cred_prepare, selinux_cred_prepare),
+ LSM_HOOK_INIT(cred_transfer, selinux_cred_transfer),
+ LSM_HOOK_INIT(kernel_act_as, selinux_kernel_act_as),
+ LSM_HOOK_INIT(kernel_create_files_as, selinux_kernel_create_files_as),
+ LSM_HOOK_INIT(kernel_module_request, selinux_kernel_module_request),
+ LSM_HOOK_INIT(task_setpgid, selinux_task_setpgid),
+ LSM_HOOK_INIT(task_getpgid, selinux_task_getpgid),
+ LSM_HOOK_INIT(task_getsid, selinux_task_getsid),
+ LSM_HOOK_INIT(task_getsecid, selinux_task_getsecid),
+ LSM_HOOK_INIT(task_setnice, selinux_task_setnice),
+ LSM_HOOK_INIT(task_setioprio, selinux_task_setioprio),
+ LSM_HOOK_INIT(task_getioprio, selinux_task_getioprio),
+ LSM_HOOK_INIT(task_setrlimit, selinux_task_setrlimit),
+ LSM_HOOK_INIT(task_setscheduler, selinux_task_setscheduler),
+ LSM_HOOK_INIT(task_getscheduler, selinux_task_getscheduler),
+ LSM_HOOK_INIT(task_movememory, selinux_task_movememory),
+ LSM_HOOK_INIT(task_kill, selinux_task_kill),
+ LSM_HOOK_INIT(task_wait, selinux_task_wait),
+ LSM_HOOK_INIT(task_to_inode, selinux_task_to_inode),
+
+ LSM_HOOK_INIT(ipc_permission, selinux_ipc_permission),
+ LSM_HOOK_INIT(ipc_getsecid, selinux_ipc_getsecid),
+
+ LSM_HOOK_INIT(msg_msg_alloc_security, selinux_msg_msg_alloc_security),
+ LSM_HOOK_INIT(msg_msg_free_security, selinux_msg_msg_free_security),
+
+ LSM_HOOK_INIT(msg_queue_alloc_security,
+ selinux_msg_queue_alloc_security),
+ LSM_HOOK_INIT(msg_queue_free_security, selinux_msg_queue_free_security),
+ LSM_HOOK_INIT(msg_queue_associate, selinux_msg_queue_associate),
+ LSM_HOOK_INIT(msg_queue_msgctl, selinux_msg_queue_msgctl),
+ LSM_HOOK_INIT(msg_queue_msgsnd, selinux_msg_queue_msgsnd),
+ LSM_HOOK_INIT(msg_queue_msgrcv, selinux_msg_queue_msgrcv),
+
+ LSM_HOOK_INIT(shm_alloc_security, selinux_shm_alloc_security),
+ LSM_HOOK_INIT(shm_free_security, selinux_shm_free_security),
+ LSM_HOOK_INIT(shm_associate, selinux_shm_associate),
+ LSM_HOOK_INIT(shm_shmctl, selinux_shm_shmctl),
+ LSM_HOOK_INIT(shm_shmat, selinux_shm_shmat),
+
+ LSM_HOOK_INIT(sem_alloc_security, selinux_sem_alloc_security),
+ LSM_HOOK_INIT(sem_free_security, selinux_sem_free_security),
+ LSM_HOOK_INIT(sem_associate, selinux_sem_associate),
+ LSM_HOOK_INIT(sem_semctl, selinux_sem_semctl),
+ LSM_HOOK_INIT(sem_semop, selinux_sem_semop),
+
+ LSM_HOOK_INIT(d_instantiate, selinux_d_instantiate),
+
+ LSM_HOOK_INIT(getprocattr, selinux_getprocattr),
+ LSM_HOOK_INIT(setprocattr, selinux_setprocattr),
+
+ LSM_HOOK_INIT(ismaclabel, selinux_ismaclabel),
+ LSM_HOOK_INIT(secid_to_secctx, selinux_secid_to_secctx),
+ LSM_HOOK_INIT(secctx_to_secid, selinux_secctx_to_secid),
+ LSM_HOOK_INIT(release_secctx, selinux_release_secctx),
+ LSM_HOOK_INIT(inode_notifysecctx, selinux_inode_notifysecctx),
+ LSM_HOOK_INIT(inode_setsecctx, selinux_inode_setsecctx),
+ LSM_HOOK_INIT(inode_getsecctx, selinux_inode_getsecctx),
+
+ LSM_HOOK_INIT(unix_stream_connect, selinux_socket_unix_stream_connect),
+ LSM_HOOK_INIT(unix_may_send, selinux_socket_unix_may_send),
+
+ LSM_HOOK_INIT(socket_create, selinux_socket_create),
+ LSM_HOOK_INIT(socket_post_create, selinux_socket_post_create),
+ LSM_HOOK_INIT(socket_bind, selinux_socket_bind),
+ LSM_HOOK_INIT(socket_connect, selinux_socket_connect),
+ LSM_HOOK_INIT(socket_listen, selinux_socket_listen),
+ LSM_HOOK_INIT(socket_accept, selinux_socket_accept),
+ LSM_HOOK_INIT(socket_sendmsg, selinux_socket_sendmsg),
+ LSM_HOOK_INIT(socket_recvmsg, selinux_socket_recvmsg),
+ LSM_HOOK_INIT(socket_getsockname, selinux_socket_getsockname),
+ LSM_HOOK_INIT(socket_getpeername, selinux_socket_getpeername),
+ LSM_HOOK_INIT(socket_getsockopt, selinux_socket_getsockopt),
+ LSM_HOOK_INIT(socket_setsockopt, selinux_socket_setsockopt),
+ LSM_HOOK_INIT(socket_shutdown, selinux_socket_shutdown),
+ LSM_HOOK_INIT(socket_sock_rcv_skb, selinux_socket_sock_rcv_skb),
+ LSM_HOOK_INIT(socket_getpeersec_stream,
+ selinux_socket_getpeersec_stream),
+ LSM_HOOK_INIT(socket_getpeersec_dgram, selinux_socket_getpeersec_dgram),
+ LSM_HOOK_INIT(sk_alloc_security, selinux_sk_alloc_security),
+ LSM_HOOK_INIT(sk_free_security, selinux_sk_free_security),
+ LSM_HOOK_INIT(sk_clone_security, selinux_sk_clone_security),
+ LSM_HOOK_INIT(sk_getsecid, selinux_sk_getsecid),
+ LSM_HOOK_INIT(sock_graft, selinux_sock_graft),
+ LSM_HOOK_INIT(inet_conn_request, selinux_inet_conn_request),
+ LSM_HOOK_INIT(inet_csk_clone, selinux_inet_csk_clone),
+ LSM_HOOK_INIT(inet_conn_established, selinux_inet_conn_established),
+ LSM_HOOK_INIT(secmark_relabel_packet, selinux_secmark_relabel_packet),
+ LSM_HOOK_INIT(secmark_refcount_inc, selinux_secmark_refcount_inc),
+ LSM_HOOK_INIT(secmark_refcount_dec, selinux_secmark_refcount_dec),
+ LSM_HOOK_INIT(req_classify_flow, selinux_req_classify_flow),
+ LSM_HOOK_INIT(tun_dev_alloc_security, selinux_tun_dev_alloc_security),
+ LSM_HOOK_INIT(tun_dev_free_security, selinux_tun_dev_free_security),
+ LSM_HOOK_INIT(tun_dev_create, selinux_tun_dev_create),
+ LSM_HOOK_INIT(tun_dev_attach_queue, selinux_tun_dev_attach_queue),
+ LSM_HOOK_INIT(tun_dev_attach, selinux_tun_dev_attach),
+ LSM_HOOK_INIT(tun_dev_open, selinux_tun_dev_open),
#ifdef CONFIG_SECURITY_NETWORK_XFRM
- .xfrm_policy_alloc_security = selinux_xfrm_policy_alloc,
- .xfrm_policy_clone_security = selinux_xfrm_policy_clone,
- .xfrm_policy_free_security = selinux_xfrm_policy_free,
- .xfrm_policy_delete_security = selinux_xfrm_policy_delete,
- .xfrm_state_alloc = selinux_xfrm_state_alloc,
- .xfrm_state_alloc_acquire = selinux_xfrm_state_alloc_acquire,
- .xfrm_state_free_security = selinux_xfrm_state_free,
- .xfrm_state_delete_security = selinux_xfrm_state_delete,
- .xfrm_policy_lookup = selinux_xfrm_policy_lookup,
- .xfrm_state_pol_flow_match = selinux_xfrm_state_pol_flow_match,
- .xfrm_decode_session = selinux_xfrm_decode_session,
+ LSM_HOOK_INIT(xfrm_policy_alloc_security, selinux_xfrm_policy_alloc),
+ LSM_HOOK_INIT(xfrm_policy_clone_security, selinux_xfrm_policy_clone),
+ LSM_HOOK_INIT(xfrm_policy_free_security, selinux_xfrm_policy_free),
+ LSM_HOOK_INIT(xfrm_policy_delete_security, selinux_xfrm_policy_delete),
+ LSM_HOOK_INIT(xfrm_state_alloc, selinux_xfrm_state_alloc),
+ LSM_HOOK_INIT(xfrm_state_alloc_acquire,
+ selinux_xfrm_state_alloc_acquire),
+ LSM_HOOK_INIT(xfrm_state_free_security, selinux_xfrm_state_free),
+ LSM_HOOK_INIT(xfrm_state_delete_security, selinux_xfrm_state_delete),
+ LSM_HOOK_INIT(xfrm_policy_lookup, selinux_xfrm_policy_lookup),
+ LSM_HOOK_INIT(xfrm_state_pol_flow_match,
+ selinux_xfrm_state_pol_flow_match),
+ LSM_HOOK_INIT(xfrm_decode_session, selinux_xfrm_decode_session),
#endif
#ifdef CONFIG_KEYS
- .key_alloc = selinux_key_alloc,
- .key_free = selinux_key_free,
- .key_permission = selinux_key_permission,
- .key_getsecurity = selinux_key_getsecurity,
+ LSM_HOOK_INIT(key_alloc, selinux_key_alloc),
+ LSM_HOOK_INIT(key_free, selinux_key_free),
+ LSM_HOOK_INIT(key_permission, selinux_key_permission),
+ LSM_HOOK_INIT(key_getsecurity, selinux_key_getsecurity),
#endif
#ifdef CONFIG_AUDIT
- .audit_rule_init = selinux_audit_rule_init,
- .audit_rule_known = selinux_audit_rule_known,
- .audit_rule_match = selinux_audit_rule_match,
- .audit_rule_free = selinux_audit_rule_free,
+ LSM_HOOK_INIT(audit_rule_init, selinux_audit_rule_init),
+ LSM_HOOK_INIT(audit_rule_known, selinux_audit_rule_known),
+ LSM_HOOK_INIT(audit_rule_match, selinux_audit_rule_match),
+ LSM_HOOK_INIT(audit_rule_free, selinux_audit_rule_free),
#endif
};
static __init int selinux_init(void)
{
- if (!security_module_enable(&selinux_ops)) {
+ if (!security_module_enable("selinux")) {
selinux_enabled = 0;
return 0;
}
0, SLAB_PANIC, NULL);
avc_init();
- if (register_security(&selinux_ops))
- panic("SELinux: Unable to register with kernel.\n");
+ security_add_hooks(selinux_hooks, ARRAY_SIZE(selinux_hooks));
if (avc_add_callback(selinux_netcache_avc_callback, AVC_CALLBACK_RESET))
panic("SELinux: Unable to register AVC netcache callback\n");
selinux_disabled = 1;
selinux_enabled = 0;
- reset_security_ops();
+ security_delete_hooks(selinux_hooks, ARRAY_SIZE(selinux_hooks));
/* Try to destroy the avc node cache */
avc_disable();
projects / cascardo / linux.git / commitdiff