static void i830_cleanup(void)
{
- kunmap(intel_private.i8xx_page);
- intel_private.i8xx_flush_page = NULL;
+ if (intel_private.i8xx_flush_page) {
+ kunmap(intel_private.i8xx_flush_page);
+ intel_private.i8xx_flush_page = NULL;
+ }
__free_page(intel_private.i8xx_page);
intel_private.i8xx_page = NULL;
case I915_PARAM_HAS_BLT:
value = HAS_BLT(dev);
break;
+ case I915_PARAM_HAS_COHERENT_RINGS:
+ value = 1;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
* use this buffer rather sooner than later, so issuing the required
* flush earlier is beneficial.
*/
- if (obj->write_domain & I915_GEM_GPU_DOMAINS)
+ if (obj->write_domain & I915_GEM_GPU_DOMAINS) {
i915_gem_flush_ring(dev, file_priv,
obj_priv->ring,
0, obj->write_domain);
+ } else if (obj_priv->ring->outstanding_lazy_request) {
+ /* This ring is not being cleared by active usage,
+ * so emit a request to do so.
+ */
+ u32 seqno = i915_add_request(dev,
+ NULL, NULL,
+ obj_priv->ring);
+ if (seqno == 0)
+ ret = -ENOMEM;
+ }
/* Update the active list for the hardware's current position.
* Otherwise this only updates on a delayed timer or when irqs
#define TRANS_DP_10BPC (1<<9)
#define TRANS_DP_6BPC (2<<9)
#define TRANS_DP_12BPC (3<<9)
+#define TRANS_DP_BPC_MASK (3<<9)
#define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4)
#define TRANS_DP_VSYNC_ACTIVE_LOW 0
#define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3)
reg = TRANS_DP_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(TRANS_DP_PORT_SEL_MASK |
- TRANS_DP_SYNC_MASK);
+ TRANS_DP_SYNC_MASK |
+ TRANS_DP_BPC_MASK);
temp |= (TRANS_DP_OUTPUT_ENABLE |
TRANS_DP_ENH_FRAMING);
+ temp |= TRANS_DP_8BPC;
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
}
}
-#define DATA_N 0x800000
-#define LINK_N 0x80000
-
static void
ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
int link_clock, struct fdi_m_n *m_n)
{
- u64 temp;
-
m_n->tu = 64; /* default size */
- temp = (u64) DATA_N * pixel_clock;
- temp = div_u64(temp, link_clock);
- m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
- m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
- m_n->gmch_n = DATA_N;
+ /* BUG_ON(pixel_clock > INT_MAX / 36); */
+ m_n->gmch_m = bits_per_pixel * pixel_clock;
+ m_n->gmch_n = link_clock * nlanes * 8;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- temp = (u64) LINK_N * pixel_clock;
- m_n->link_m = div_u64(temp, link_clock);
- m_n->link_n = LINK_N;
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
}
/* FDI link */
if (HAS_PCH_SPLIT(dev)) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
int lane = 0, link_bw, bpp;
/* CPU eDP doesn't require FDI link, so just set DP M/N
according to current link config */
intel_crtc->fdi_lanes = lane;
+ if (pixel_multiplier > 1)
+ link_bw *= pixel_multiplier;
ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
}
.page_flip = intel_crtc_page_flip,
};
+static void intel_sanitize_modesetting(struct drm_device *dev,
+ int pipe, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg, val;
+
+ if (HAS_PCH_SPLIT(dev))
+ return;
+
+ /* Who knows what state these registers were left in by the BIOS or
+ * grub?
+ *
+ * If we leave the registers in a conflicting state (e.g. with the
+ * display plane reading from the other pipe than the one we intend
+ * to use) then when we attempt to teardown the active mode, we will
+ * not disable the pipes and planes in the correct order -- leaving
+ * a plane reading from a disabled pipe and possibly leading to
+ * undefined behaviour.
+ */
+
+ reg = DSPCNTR(plane);
+ val = I915_READ(reg);
+
+ if ((val & DISPLAY_PLANE_ENABLE) == 0)
+ return;
+ if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
+ return;
+
+ /* This display plane is active and attached to the other CPU pipe. */
+ pipe = !pipe;
+
+ /* Disable the plane and wait for it to stop reading from the pipe. */
+ I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
+ intel_flush_display_plane(dev, plane);
+
+ if (IS_GEN2(dev))
+ intel_wait_for_vblank(dev, pipe);
+
+ if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ return;
+
+ /* Switch off the pipe. */
+ reg = PIPECONF(pipe);
+ val = I915_READ(reg);
+ if (val & PIPECONF_ENABLE) {
+ I915_WRITE(reg, val & ~PIPECONF_ENABLE);
+ intel_wait_for_pipe_off(dev, pipe);
+ }
+}
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
(unsigned long)intel_crtc);
+
+ intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
}
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t DP = intel_dp->DP;
+ if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+ return;
+
DRM_DEBUG_KMS("\n");
if (is_edp(intel_dp)) {
if (is_edp(intel_dp))
DP |= DP_LINK_TRAIN_OFF;
+
+ if (!HAS_PCH_CPT(dev) &&
+ I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+ /* Hardware workaround: leaving our transcoder select
+ * set to transcoder B while it's off will prevent the
+ * corresponding HDMI output on transcoder A.
+ *
+ * Combine this with another hardware workaround:
+ * transcoder select bit can only be cleared while the
+ * port is enabled.
+ */
+ DP &= ~DP_PIPEB_SELECT;
+ I915_WRITE(intel_dp->output_reg, DP);
+
+ /* Changes to enable or select take place the vblank
+ * after being written.
+ */
+ intel_wait_for_vblank(intel_dp->base.base.dev,
+ intel_crtc->pipe);
+ }
+
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
}
/**
* Sets the power state for the panel.
*/
-static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
+static void intel_lvds_enable(struct intel_lvds *intel_lvds)
{
struct drm_device *dev = intel_lvds->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
lvds_reg = LVDS;
}
- if (on) {
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
- intel_panel_set_backlight(dev, dev_priv->backlight_level);
- } else {
- dev_priv->backlight_level = intel_panel_get_backlight(dev);
-
- intel_panel_set_backlight(dev, 0);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- if (intel_lvds->pfit_control) {
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
- I915_WRITE(PFIT_CONTROL, 0);
- intel_lvds->pfit_control = 0;
+ if (intel_lvds->pfit_dirty) {
+ /*
+ * Enable automatic panel scaling so that non-native modes
+ * fill the screen. The panel fitter should only be
+ * adjusted whilst the pipe is disabled, according to
+ * register description and PRM.
+ */
+ DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+ intel_lvds->pfit_control,
+ intel_lvds->pfit_pgm_ratios);
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) {
+ DRM_ERROR("timed out waiting for panel to power off\n");
+ } else {
+ I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
intel_lvds->pfit_dirty = false;
}
+ }
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+ POSTING_READ(lvds_reg);
+
+ intel_panel_set_backlight(dev, dev_priv->backlight_level);
+}
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
+static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+{
+ struct drm_device *dev = intel_lvds->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 ctl_reg, lvds_reg;
+
+ if (HAS_PCH_SPLIT(dev)) {
+ ctl_reg = PCH_PP_CONTROL;
+ lvds_reg = PCH_LVDS;
+ } else {
+ ctl_reg = PP_CONTROL;
+ lvds_reg = LVDS;
+ }
+
+ dev_priv->backlight_level = intel_panel_get_backlight(dev);
+ intel_panel_set_backlight(dev, 0);
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+
+ if (intel_lvds->pfit_control) {
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
+ DRM_ERROR("timed out waiting for panel to power off\n");
+
+ I915_WRITE(PFIT_CONTROL, 0);
+ intel_lvds->pfit_dirty = true;
}
+
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
POSTING_READ(lvds_reg);
}
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
if (mode == DRM_MODE_DPMS_ON)
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
else
- intel_lvds_set_power(intel_lvds, false);
+ intel_lvds_disable(intel_lvds);
/* XXX: We never power down the LVDS pairs. */
}
/* Always do a full power on as we do not know what state
* we were left in.
*/
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
}
static void intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
/*
* The LVDS pin pair will already have been turned on in the
* intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
-
- if (HAS_PCH_SPLIT(dev))
- return;
-
- if (!intel_lvds->pfit_dirty)
- return;
-
- /*
- * Enable automatic panel scaling so that non-native modes fill the
- * screen. Should be enabled before the pipe is enabled, according to
- * register description and PRM.
- */
- DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
- intel_lvds->pfit_control,
- intel_lvds->pfit_pgm_ratios);
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
-
- I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
- I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
- intel_lvds->pfit_dirty = false;
}
/**
/* G45 ring initialization fails to reset head to zero */
if (head != 0) {
- DRM_ERROR("%s head not reset to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ DRM_DEBUG_KMS("%s head not reset to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
I915_WRITE_HEAD(ring, 0);
- DRM_ERROR("%s head forced to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+ DRM_ERROR("failed to set %s head to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
+ }
}
I915_WRITE_CTL(ring,
#define I915_PARAM_HAS_EXECBUF2 9
#define I915_PARAM_HAS_BSD 10
#define I915_PARAM_HAS_BLT 11
+#define I915_PARAM_HAS_RELAXED_FENCING 12
+#define I915_PARAM_HAS_COHERENT_RINGS 13
typedef struct drm_i915_getparam {
int param;
projects / cascardo / linux.git / commitdiff