ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces
authorGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Fri, 27 Sep 2013 08:02:57 +0000 (10:02 +0200)
committerSimon Horman <horms+renesas@verge.net.au>
Tue, 8 Oct 2013 00:25:14 +0000 (09:25 +0900)
Add SDHI0 and MMCIF interfaces to armadillo800eva-reference with
regulators and pin configurations. SDHI1 is not added yet, because the
switch, that connects the interface either to an SD slot or to a WiFi
SDIO card cannot be described in DT yet.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
arch/arm/boot/dts/r8a7740.dtsi

index 8b2aab5..1c56c5e 100644 (file)
                regulator-boot-on;
        };
 
+       vcc_sdhi0: regulator@1 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "SDHI0 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       vccq_sdhi0: regulator@2 {
+               compatible = "regulator-gpio";
+
+               regulator-name = "SDHI0 VccQ";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&vcc_sdhi0>;
+
+               enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+               gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+               states = <3300000 0
+                         1800000 1>;
+
+               enable-active-high;
+       };
+
        leds {
                compatible = "gpio-leds";
                led1 {
                renesas,groups = "tpu0_to2_1";
                renesas,function = "tpu0";
        };
+
+       mmc0_pins: mmc0 {
+               renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+               renesas,function = "mmc0";
+       };
+
+       sdhi0_pins: sdhi0 {
+               renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+               renesas,function = "sdhi0";
+       };
 };
 
 &tpu {
        status = "okay";
 };
+
+&mmcif0 {
+       pinctrl-0 = <&mmc0_pins>;
+       pinctrl-names = "default";
+
+       vmmc-supply = <&reg_3p3v>;
+       bus-width = <8>;
+       non-removable;
+       status = "okay";
+};
+
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_pins>;
+       pinctrl-names = "default";
+
+       vmmc-supply = <&vcc_sdhi0>;
+       vqmmc-supply = <&vccq_sdhi0>;
+       bus-width = <4>;
+       cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
index 868bdde..ae1e230 100644 (file)
                status = "disabled";
                #pwm-cells = <3>;
        };
+
+       mmcif0: mmcif@e6bd0000 {
+               compatible = "renesas,sh-mmcif";
+               reg = <0xe6bd0000 0x100>;
+               interrupt-parent = <&gic>;
+               interrupts = <0 56 4
+                               0 57 4>;
+               status = "disabled";
+       };
+
+       sdhi0: sdhi@e6850000 {
+               compatible = "renesas,sdhi-r8a7740";
+               reg = <0xe6850000 0x100>;
+               interrupt-parent = <&gic>;
+               interrupts = <0 117 4
+                               0 118 4
+                               0 119 4>;
+               cap-sd-highspeed;
+               cap-sdio-irq;
+               status = "disabled";
+       };
+
+       sdhi1: sdhi@e6860000 {
+               compatible = "renesas,sdhi-r8a7740";
+               reg = <0xe6860000 0x100>;
+               interrupt-parent = <&gic>;
+               interrupts = <0 121 4
+                               0 122 4
+                               0 123 4>;
+               cap-sd-highspeed;
+               cap-sdio-irq;
+               status = "disabled";
+       };
 };