config COLDFIRE
bool "Coldfire CPU family support"
select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_HAVE_CUSTOM_GPIO_H
select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_MULDIV64
#define coldfire_gpio_h
#include <linux/io.h>
-#include <asm-generic/gpio.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-
-/*
- * The Freescale Coldfire family is quite varied in how they implement GPIO.
- * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
- * only one port, others have multiple ports; some have a single data latch
- * for both input and output, others have a separate pin data register to read
- * input; some require a read-modify-write access to change an output, others
- * have set and clear registers for some of the outputs; Some have all the
- * GPIOs in a single control area, others have some GPIOs implemented in
- * different modules.
- *
- * This implementation attempts accommodate the differences while presenting
- * a generic interface that will optimize to as few instructions as possible.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M532x) || defined(CONFIG_M54xx)
-
-/* These parts have GPIO organized by 8 bit ports */
-
-#define MCFGPIO_PORTTYPE u8
-#define MCFGPIO_PORTSIZE 8
-#define mcfgpio_read(port) __raw_readb(port)
-#define mcfgpio_write(data, port) __raw_writeb(data, port)
-
-#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
-
-/* These parts have GPIO organized by 16 bit ports */
-
-#define MCFGPIO_PORTTYPE u16
-#define MCFGPIO_PORTSIZE 16
-#define mcfgpio_read(port) __raw_readw(port)
-#define mcfgpio_write(data, port) __raw_writew(data, port)
-
-#elif defined(CONFIG_M5249)
-
-/* These parts have GPIO organized by 32 bit ports */
-
-#define MCFGPIO_PORTTYPE u32
-#define MCFGPIO_PORTSIZE 32
-#define mcfgpio_read(port) __raw_readl(port)
-#define mcfgpio_write(data, port) __raw_writel(data, port)
-
-#endif
-
-#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE))
-#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE)
-
-#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
-/*
- * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
- * read-modify-write to change an output and a GPIO module which has separate
- * set/clr registers to directly change outputs with a single write access.
- */
-#if defined(CONFIG_M528x)
-/*
- * The 528x also has GPIOs in other modules (GPT, QADC) which use
- * read-modify-write as well as those controlled by the EPORT and GPIO modules.
- */
-#define MCFGPIO_SCR_START 40
-#else
-#define MCFGPIO_SCR_START 8
-#endif
-
-#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \
- mcfgpio_port(gpio - MCFGPIO_SCR_START))
-
-#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \
- mcfgpio_port(gpio - MCFGPIO_SCR_START))
-#else
-
-#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX
-/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
-#define MCFGPIO_SETR_PORT(gpio) 0
-#define MCFGPIO_CLRR_PORT(gpio) 0
-
-#endif
-/*
- * Coldfire specific helper functions
- */
-
-/* return the port pin data register for a gpio */
-static inline u32 __mcf_gpio_ppdr(unsigned gpio)
-{
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M5307) || defined(CONFIG_M5407)
- return MCFSIM_PADAT;
-#elif defined(CONFIG_M5272)
- if (gpio < 16)
- return MCFSIM_PADAT;
- else if (gpio < 32)
- return MCFSIM_PBDAT;
- else
- return MCFSIM_PCDAT;
-#elif defined(CONFIG_M5249)
- if (gpio < 32)
- return MCFSIM2_GPIOREAD;
- else
- return MCFSIM2_GPIO1READ;
-#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
- if (gpio < 8)
- return MCFEPORT_EPPDR;
-#if defined(CONFIG_M528x)
- else if (gpio < 16)
- return MCFGPTA_GPTPORT;
- else if (gpio < 24)
- return MCFGPTB_GPTPORT;
- else if (gpio < 32)
- return MCFQADC_PORTQA;
- else if (gpio < 40)
- return MCFQADC_PORTQB;
-#endif
- else
- return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
-#else
- return 0;
-#endif
-}
-
-/* return the port output data register for a gpio */
-static inline u32 __mcf_gpio_podr(unsigned gpio)
-{
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M5307) || defined(CONFIG_M5407)
- return MCFSIM_PADAT;
-#elif defined(CONFIG_M5272)
- if (gpio < 16)
- return MCFSIM_PADAT;
- else if (gpio < 32)
- return MCFSIM_PBDAT;
- else
- return MCFSIM_PCDAT;
-#elif defined(CONFIG_M5249)
- if (gpio < 32)
- return MCFSIM2_GPIOWRITE;
- else
- return MCFSIM2_GPIO1WRITE;
-#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
- if (gpio < 8)
- return MCFEPORT_EPDR;
-#if defined(CONFIG_M528x)
- else if (gpio < 16)
- return MCFGPTA_GPTPORT;
- else if (gpio < 24)
- return MCFGPTB_GPTPORT;
- else if (gpio < 32)
- return MCFQADC_PORTQA;
- else if (gpio < 40)
- return MCFQADC_PORTQB;
-#endif
- else
- return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
-#else
- return 0;
-#endif
-}
-
+#include <asm/mcfgpio.h>
/*
* The Generic GPIO functions
*
static inline int gpio_get_value(unsigned gpio)
{
if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
- return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+ return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
else
return __gpio_get_value(gpio);
}
MCFGPIO_PORTTYPE data;
local_irq_save(flags);
- data = mcfgpio_read(__mcf_gpio_podr(gpio));
+ data = mcfgpio_read(__mcfgpio_podr(gpio));
if (value)
data |= mcfgpio_bit(gpio);
else
data &= ~mcfgpio_bit(gpio);
- mcfgpio_write(data, __mcf_gpio_podr(gpio));
+ mcfgpio_write(data, __mcfgpio_podr(gpio));
local_irq_restore(flags);
} else {
if (value)
#ifndef mcfgpio_h
#define mcfgpio_h
-#include <linux/io.h>
+#ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h>
+#else
+
+int __mcfgpio_get_value(unsigned gpio);
+void __mcfgpio_set_value(unsigned gpio, int value);
+int __mcfgpio_direction_input(unsigned gpio);
+int __mcfgpio_direction_output(unsigned gpio, int value);
+int __mcfgpio_request(unsigned gpio);
+void __mcfgpio_free(unsigned gpio);
+
+/* our alternate 'gpiolib' functions */
+static inline int __gpio_get_value(unsigned gpio)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return __mcfgpio_get_value(gpio);
+ else
+ return -EINVAL;
+}
+
+static inline void __gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ __mcfgpio_set_value(gpio, value);
+}
+
+static inline int __gpio_cansleep(unsigned gpio)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return 0;
+ else
+ return -EINVAL;
+}
+
+static inline int __gpio_to_irq(unsigned gpio)
+{
+ return -EINVAL;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return __mcfgpio_direction_input(gpio);
+ else
+ return -EINVAL;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return __mcfgpio_direction_output(gpio, value);
+ else
+ return -EINVAL;
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return __mcfgpio_request(gpio);
+ else
+ return -EINVAL;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ __mcfgpio_free(gpio);
+}
+
+#endif /* CONFIG_GPIOLIB */
-struct mcf_gpio_chip {
- struct gpio_chip gpio_chip;
- void __iomem *pddr;
- void __iomem *podr;
- void __iomem *ppdr;
- void __iomem *setr;
- void __iomem *clrr;
- const u8 *gpio_to_pinmux;
-};
-
-extern struct mcf_gpio_chip mcf_gpio_chips[];
-extern unsigned int mcf_gpio_chips_size;
-
-int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
-int mcf_gpio_get_value(struct gpio_chip *, unsigned);
-int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
-void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
-void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
-int mcf_gpio_request(struct gpio_chip *, unsigned);
-void mcf_gpio_free(struct gpio_chip *, unsigned);
/*
- * Define macros to ease the pain of setting up the GPIO tables. There
- * are two cases we need to deal with here, they cover all currently
- * available ColdFire GPIO hardware. There are of course minor differences
- * in the layout and number of bits in each ColdFire part, but the macros
- * take all that in.
+ * The Freescale Coldfire family is quite varied in how they implement GPIO.
+ * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
+ * only one port, others have multiple ports; some have a single data latch
+ * for both input and output, others have a separate pin data register to read
+ * input; some require a read-modify-write access to change an output, others
+ * have set and clear registers for some of the outputs; Some have all the
+ * GPIOs in a single control area, others have some GPIOs implemented in
+ * different modules.
*
- * Firstly is the conventional GPIO registers where we toggle individual
- * bits in a register, preserving the other bits in the register. For
- * lack of a better term I have called this the slow method.
+ * This implementation attempts accommodate the differences while presenting
+ * a generic interface that will optimize to as few instructions as possible.
*/
-#define MCFGPS(mlabel, mbase, mngpio, mpddr, mpodr, mppdr) \
- { \
- .gpio_chip = { \
- .label = #mlabel, \
- .request = mcf_gpio_request, \
- .free = mcf_gpio_free, \
- .direction_input = mcf_gpio_direction_input, \
- .direction_output = mcf_gpio_direction_output,\
- .get = mcf_gpio_get_value, \
- .set = mcf_gpio_set_value, \
- .base = mbase, \
- .ngpio = mngpio, \
- }, \
- .pddr = (void __iomem *) mpddr, \
- .podr = (void __iomem *) mpodr, \
- .ppdr = (void __iomem *) mppdr, \
- }
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M532x) || defined(CONFIG_M54xx)
+
+/* These parts have GPIO organized by 8 bit ports */
+
+#define MCFGPIO_PORTTYPE u8
+#define MCFGPIO_PORTSIZE 8
+#define mcfgpio_read(port) __raw_readb(port)
+#define mcfgpio_write(data, port) __raw_writeb(data, port)
+
+#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
+
+/* These parts have GPIO organized by 16 bit ports */
+
+#define MCFGPIO_PORTTYPE u16
+#define MCFGPIO_PORTSIZE 16
+#define mcfgpio_read(port) __raw_readw(port)
+#define mcfgpio_write(data, port) __raw_writew(data, port)
+
+#elif defined(CONFIG_M5249)
+
+/* These parts have GPIO organized by 32 bit ports */
+
+#define MCFGPIO_PORTTYPE u32
+#define MCFGPIO_PORTSIZE 32
+#define mcfgpio_read(port) __raw_readl(port)
+#define mcfgpio_write(data, port) __raw_writel(data, port)
+
+#endif
+#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE))
+#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE)
+
+#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+/*
+ * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
+ * read-modify-write to change an output and a GPIO module which has separate
+ * set/clr registers to directly change outputs with a single write access.
+ */
+#if defined(CONFIG_M528x)
/*
- * Secondly is the faster case, where we have set and clear registers
- * that allow us to set or clear a bit with a single write, not having
- * to worry about preserving other bits.
+ * The 528x also has GPIOs in other modules (GPT, QADC) which use
+ * read-modify-write as well as those controlled by the EPORT and GPIO modules.
*/
-#define MCFGPF(mlabel, mbase, mngpio) \
- { \
- .gpio_chip = { \
- .label = #mlabel, \
- .request = mcf_gpio_request, \
- .free = mcf_gpio_free, \
- .direction_input = mcf_gpio_direction_input, \
- .direction_output = mcf_gpio_direction_output,\
- .get = mcf_gpio_get_value, \
- .set = mcf_gpio_set_value_fast, \
- .base = mbase, \
- .ngpio = mngpio, \
- }, \
- .pddr = (void __iomem *) MCFGPIO_PDDR_##mlabel, \
- .podr = (void __iomem *) MCFGPIO_PODR_##mlabel, \
- .ppdr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \
- .setr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \
- .clrr = (void __iomem *) MCFGPIO_PCLRR_##mlabel, \
- }
+#define MCFGPIO_SCR_START 40
+#else
+#define MCFGPIO_SCR_START 8
+#endif
+
+#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \
+ mcfgpio_port(gpio - MCFGPIO_SCR_START))
+
+#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \
+ mcfgpio_port(gpio - MCFGPIO_SCR_START))
+#else
+
+#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX
+/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
+#define MCFGPIO_SETR_PORT(gpio) 0
+#define MCFGPIO_CLRR_PORT(gpio) 0
#endif
+/*
+ * Coldfire specific helper functions
+ */
+
+/* return the port pin data register for a gpio */
+static inline u32 __mcfgpio_ppdr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADAT;
+ else if (gpio < 32)
+ return MCFSIM_PBDAT;
+ else
+ return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+ if (gpio < 32)
+ return MCFSIM2_GPIOREAD;
+ else
+ return MCFSIM2_GPIO1READ;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ if (gpio < 8)
+ return MCFEPORT_EPPDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTPORT;
+ else if (gpio < 24)
+ return MCFGPTB_GPTPORT;
+ else if (gpio < 32)
+ return MCFQADC_PORTQA;
+ else if (gpio < 40)
+ return MCFQADC_PORTQB;
+#endif
+ else
+ return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
+#endif
+}
+
+/* return the port output data register for a gpio */
+static inline u32 __mcfgpio_podr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADAT;
+ else if (gpio < 32)
+ return MCFSIM_PBDAT;
+ else
+ return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+ if (gpio < 32)
+ return MCFSIM2_GPIOWRITE;
+ else
+ return MCFSIM2_GPIO1WRITE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ if (gpio < 8)
+ return MCFEPORT_EPDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTPORT;
+ else if (gpio < 24)
+ return MCFGPTB_GPTPORT;
+ else if (gpio < 32)
+ return MCFQADC_PORTQA;
+ else if (gpio < 40)
+ return MCFQADC_PORTQB;
+#endif
+ else
+ return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
+#endif
+}
+
+/* return the port direction data register for a gpio */
+static inline u32 __mcfgpio_pddr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADDR;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADDR;
+ else if (gpio < 32)
+ return MCFSIM_PBDDR;
+ else
+ return MCFSIM_PCDDR;
+#elif defined(CONFIG_M5249)
+ if (gpio < 32)
+ return MCFSIM2_GPIOENABLE;
+ else
+ return MCFSIM2_GPIO1ENABLE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+ if (gpio < 8)
+ return MCFEPORT_EPDDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTDDR;
+ else if (gpio < 24)
+ return MCFGPTB_GPTDDR;
+ else if (gpio < 32)
+ return MCFQADC_DDRQA;
+ else if (gpio < 40)
+ return MCFQADC_DDRQB;
+#endif
+ else
+ return MCFGPIO_PDDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
+#endif
+}
+
+#endif /* mcfgpio_h */
+++ /dev/null
-/*
- * Coldfire generic GPIO pinmux support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef pinmux_h
-#define pinmux_h
-
-#define MCFPINMUX_NONE -1
-
-extern int mcf_pinmux_request(unsigned, unsigned);
-extern void mcf_pinmux_release(unsigned, unsigned);
-
-static inline int mcf_pinmux_is_valid(unsigned pinmux)
-{
- return pinmux != MCFPINMUX_NONE;
-}
-
-#endif
-
obj-$(CONFIG_CLEOPATRA) += nettel.o
obj-$(CONFIG_FIREBEE) += firebee.o
-obj-y += pinmux.o gpio.o
+obj-y += gpio.o
extra-y := head.o
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
-#include <asm/gpio.h>
-#include <asm/pinmux.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
#include <asm/mcfgpio.h>
-#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip)
+int __mcfgpio_get_value(unsigned gpio)
+{
+ return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_get_value);
+
+void __mcfgpio_set_value(unsigned gpio, int value)
+{
+ if (gpio < MCFGPIO_SCR_START) {
+ unsigned long flags;
+ MCFGPIO_PORTTYPE data;
+
+ local_irq_save(flags);
+ data = mcfgpio_read(__mcfgpio_podr(gpio));
+ if (value)
+ data |= mcfgpio_bit(gpio);
+ else
+ data &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_podr(gpio));
+ local_irq_restore(flags);
+ } else {
+ if (value)
+ mcfgpio_write(mcfgpio_bit(gpio),
+ MCFGPIO_SETR_PORT(gpio));
+ else
+ mcfgpio_write(~mcfgpio_bit(gpio),
+ MCFGPIO_CLRR_PORT(gpio));
+ }
+}
+EXPORT_SYMBOL(__mcfgpio_set_value);
-int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+int __mcfgpio_direction_input(unsigned gpio)
{
unsigned long flags;
MCFGPIO_PORTTYPE dir;
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
local_irq_save(flags);
- dir = mcfgpio_read(mcf_chip->pddr);
- dir &= ~mcfgpio_bit(chip->base + offset);
- mcfgpio_write(dir, mcf_chip->pddr);
+ dir = mcfgpio_read(__mcfgpio_pddr(gpio));
+ dir &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(dir, __mcfgpio_pddr(gpio));
local_irq_restore(flags);
return 0;
}
+EXPORT_SYMBOL(__mcfgpio_direction_input);
-int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
- return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
-}
-
-int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
+int __mcfgpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
MCFGPIO_PORTTYPE data;
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
local_irq_save(flags);
- /* write the value to the output latch */
- data = mcfgpio_read(mcf_chip->podr);
+ data = mcfgpio_read(__mcfgpio_pddr(gpio));
if (value)
- data |= mcfgpio_bit(chip->base + offset);
+ data |= mcfgpio_bit(gpio);
else
- data &= ~mcfgpio_bit(chip->base + offset);
- mcfgpio_write(data, mcf_chip->podr);
-
- /* now set the direction to output */
- data = mcfgpio_read(mcf_chip->pddr);
- data |= mcfgpio_bit(chip->base + offset);
- mcfgpio_write(data, mcf_chip->pddr);
+ data &= mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_pddr(gpio));
+
+ /* now set the data to output */
+ if (gpio < MCFGPIO_SCR_START) {
+ data = mcfgpio_read(__mcfgpio_podr(gpio));
+ if (value)
+ data |= mcfgpio_bit(gpio);
+ else
+ data &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_podr(gpio));
+ } else {
+ if (value)
+ mcfgpio_write(mcfgpio_bit(gpio),
+ MCFGPIO_SETR_PORT(gpio));
+ else
+ mcfgpio_write(~mcfgpio_bit(gpio),
+ MCFGPIO_CLRR_PORT(gpio));
+ }
local_irq_restore(flags);
+ return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_direction_output);
+int __mcfgpio_request(unsigned gpio)
+{
return 0;
}
+EXPORT_SYMBOL(__mcfgpio_request);
-void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+void __mcfgpio_free(unsigned gpio)
{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+ __mcfgpio_direction_input(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_free);
- unsigned long flags;
- MCFGPIO_PORTTYPE data;
+#ifdef CONFIG_GPIOLIB
- local_irq_save(flags);
- data = mcfgpio_read(mcf_chip->podr);
- if (value)
- data |= mcfgpio_bit(chip->base + offset);
- else
- data &= ~mcfgpio_bit(chip->base + offset);
- mcfgpio_write(data, mcf_chip->podr);
- local_irq_restore(flags);
+int mcfgpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return __mcfgpio_direction_input(offset);
}
-void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value)
+int mcfgpio_get_value(struct gpio_chip *chip, unsigned offset)
{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
- if (value)
- mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
- else
- mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
+ return __mcfgpio_get_value(offset);
}
-int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
+int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
- return mcf_chip->gpio_to_pinmux ?
- mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
+ return __mcfgpio_direction_output(offset, value);
}
-void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
+void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+ __mcfgpio_set_value(offset, value);
+}
- mcf_gpio_direction_input(chip, offset);
+int mcfgpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return __mcfgpio_request(offset);
+}
- if (mcf_chip->gpio_to_pinmux)
- mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
+void mcfgpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ __mcfgpio_free(offset);
}
-struct bus_type mcf_gpio_subsys = {
+struct bus_type mcfgpio_subsys = {
.name = "gpio",
.dev_name = "gpio",
};
-static int __init mcf_gpio_sysinit(void)
-{
- unsigned int i = 0;
+static struct gpio_chip mcfgpio_chip = {
+ .label = "mcfgpio",
+ .request = mcfgpio_request,
+ .free = mcfgpio_free,
+ .direction_input = mcfgpio_direction_input,
+ .direction_output = mcfgpio_direction_output,
+ .get = mcfgpio_get_value,
+ .set = mcfgpio_set_value,
+ .base = 0,
+ .ngpio = MCFGPIO_PIN_MAX,
+};
- while (i < mcf_gpio_chips_size)
- gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
- return subsys_system_register(&mcf_gpio_subsys, NULL);
+static int __init mcfgpio_sysinit(void)
+{
+ gpiochip_add(&mcfgpio_chip);
+ return subsys_system_register(&mcfgpio_subsys, NULL);
}
-core_initcall(mcf_gpio_sysinit);
+core_initcall(mcfgpio_sysinit);
+#endif
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PP, 0, 8, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(CS, 9, 3),
- MCFGPF(FECI2C, 16, 4),
- MCFGPF(QSPI, 24, 4),
- MCFGPF(TIMER, 32, 4),
- MCFGPF(UART, 40, 8),
- MCFGPF(FECH, 48, 8),
- MCFGPF(FECL, 56, 8),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(ADDR, 13, 3),
- MCFGPF(DATAH, 16, 8),
- MCFGPF(DATAL, 24, 8),
- MCFGPF(BUSCTL, 32, 8),
- MCFGPF(BS, 40, 4),
- MCFGPF(CS, 49, 7),
- MCFGPF(SDRAM, 56, 6),
- MCFGPF(FECI2C, 64, 4),
- MCFGPF(UARTH, 72, 2),
- MCFGPF(UARTL, 80, 8),
- MCFGPF(QSPI, 88, 5),
- MCFGPF(TIMER, 96, 8),
- MCFGPF(ETPU, 104, 3),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(GPIO0, 0, 32, MCFSIM2_GPIOENABLE, MCFSIM2_GPIOWRITE, MCFSIM2_GPIOREAD),
- MCFGPS(GPIO1, 32, 32, MCFSIM2_GPIO1ENABLE, MCFSIM2_GPIO1WRITE, MCFSIM2_GPIO1READ),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
/***************************************************************************/
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PA, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
- MCFGPS(PB, 16, 16, MCFSIM_PBDDR, MCFSIM_PBDAT, MCFSIM_PBDAT),
- MCFGPS(Pc, 32, 16, MCFSIM_PCDDR, MCFSIM_PCDAT, MCFSIM_PCDAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
static void __init m5272_uarts_init(void)
{
u32 v;
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-#if defined(CONFIG_M5271)
- MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(ADDR, 13, 3),
- MCFGPF(DATAH, 16, 8),
- MCFGPF(DATAL, 24, 8),
- MCFGPF(BUSCTL, 32, 8),
- MCFGPF(BS, 40, 4),
- MCFGPF(CS, 49, 7),
- MCFGPF(SDRAM, 56, 6),
- MCFGPF(FECI2C, 64, 4),
- MCFGPF(UARTH, 72, 2),
- MCFGPF(UARTL, 80, 8),
- MCFGPF(QSPI, 88, 5),
- MCFGPF(TIMER, 96, 8),
-#elif defined(CONFIG_M5275)
- MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(BUSCTL, 8, 8),
- MCFGPF(ADDR, 21, 3),
- MCFGPF(CS, 25, 7),
- MCFGPF(FEC0H, 32, 8),
- MCFGPF(FEC0L, 40, 8),
- MCFGPF(FECI2C, 48, 6),
- MCFGPF(QSPI, 56, 7),
- MCFGPF(SDRAM, 64, 8),
- MCFGPF(TIMERH, 72, 4),
- MCFGPF(TIMERL, 80, 4),
- MCFGPF(UARTL, 88, 8),
- MCFGPF(FEC1H, 96, 8),
- MCFGPF(FEC1L, 104, 8),
- MCFGPF(BS, 114, 2),
- MCFGPF(IRQ, 121, 7),
- MCFGPF(USBH, 128, 1),
- MCFGPF(USBL, 136, 8),
- MCFGPF(UARTH, 144, 4),
-#endif
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(NQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPS(TA, 8, 4, MCFGPTA_GPTDDR, MCFGPTA_GPTPORT, MCFGPTB_GPTPORT),
- MCFGPS(TB, 16, 4, MCFGPTB_GPTDDR, MCFGPTB_GPTPORT, MCFGPTB_GPTPORT),
- MCFGPS(QA, 24, 4, MCFQADC_DDRQA, MCFQADC_PORTQA, MCFQADC_PORTQA),
- MCFGPS(QB, 32, 4, MCFQADC_DDRQB, MCFQADC_PORTQB, MCFQADC_PORTQB),
- MCFGPF(A, 40, 8),
- MCFGPF(B, 48, 8),
- MCFGPF(C, 56, 8),
- MCFGPF(D, 64, 8),
- MCFGPF(E, 72, 8),
- MCFGPF(F, 80, 8),
- MCFGPF(G, 88, 8),
- MCFGPF(H, 96, 8),
- MCFGPF(J, 104, 8),
- MCFGPF(DD, 112, 8),
- MCFGPF(EH, 120, 8),
- MCFGPF(EL, 128, 8),
- MCFGPF(AS, 136, 6),
- MCFGPF(QS, 144, 7),
- MCFGPF(SD, 152, 6),
- MCFGPF(TC, 160, 4),
- MCFGPF(TD, 168, 4),
- MCFGPF(UA, 176, 4),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
/* make sure PUAPAR is set for UART0 and UART1 */
port = readb(MCF5282_GPIO_PUAPAR);
port |= 0x03 | (0x03 << 2);
- writeb(port, MCF5282_GPIO_PUAPAR);
+ writeb(port, MCFGPIO_PUAPAR);
}
/***************************************************************************/
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
#include <asm/mcfwdebug.h>
/***************************************************************************/
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
void __init config_BSP(char *commandp, int size)
{
#if defined(CONFIG_NETtel) || \
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfdma.h>
-#include <asm/mcfgpio.h>
#include <asm/mcfwdebug.h>
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(FECH, 8, 8),
- MCFGPF(FECL, 16, 8),
- MCFGPF(SSI, 24, 5),
- MCFGPF(BUSCTL, 32, 4),
- MCFGPF(BE, 40, 4),
- MCFGPF(CS, 49, 5),
- MCFGPF(PWM, 58, 4),
- MCFGPF(FECI2C, 64, 4),
- MCFGPF(UART, 72, 8),
- MCFGPF(QSPI, 80, 6),
- MCFGPF(TIMER, 88, 4),
- MCFGPF(LCDDATAH, 96, 2),
- MCFGPF(LCDDATAM, 104, 8),
- MCFGPF(LCDDATAL, 112, 8),
- MCFGPF(LCDCTLH, 120, 1),
- MCFGPF(LCDCTLL, 128, 8),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m532x_qspi_init(void)
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/m54xxsim.h>
#include <asm/mcfuart.h>
#include <asm/m54xxgpt.h>
-#include <asm/mcfgpio.h>
#ifdef CONFIG_MMU
#include <asm/mmu_context.h>
#endif
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = { };
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
static void __init m54xx_uarts_init(void)
{
/* enable io pins */
+++ /dev/null
-/*
- * Coldfire generic GPIO pinmux support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include <asm/pinmux.h>
-
-int mcf_pinmux_request(unsigned pinmux, unsigned func)
-{
- return 0;
-}
-
-void mcf_pinmux_release(unsigned pinmux, unsigned func)
-{
-}
projects / cascardo / linux.git / commitdiff