* 'x86-v28-for-linus-phase4-D' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (186 commits)
x86, debug: print more information about unknown CPUs
x86 setup: handle more than 8 CPU flag words
x86: cpuid, fix typo
x86: move transmeta cap read to early_init_transmeta()
x86: identify_cpu_without_cpuid v2
x86: extended "flags" to show virtualization HW feature in /proc/cpuinfo
x86: move VMX MSRs to msr-index.h
x86: centaur_64.c remove duplicated setting of CONSTANT_TSC
x86: intel.c put workaround for old cpus together
x86: let intel 64-bit use intel.c
x86: make intel_64.c the same as intel.c
x86: make intel.c have 64-bit support code
x86: little clean up of intel.c/intel_64.c
x86: make 64 bit to use amd.c
x86: make amd_64 have 32 bit code
x86: make amd.c have 64bit support code
x86: merge header in amd_64.c
x86: add srat_detect_node for amd64
x86: remove duplicated force_mwait
x86: cpu make amd.c more like amd_64.c v2
...
nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
+ nox2apic [X86-64,APIC] Do not enable x2APIC mode.
+
+ x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
+ default x2apic cluster mode on platforms
+ supporting x2apic.
+
noltlbs [PPC] Do not use large page/tlb entries for kernel
lowmem mapping on PPC40x.
#define stub_rt_sigreturn sys_rt_sigreturn
#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
#include <asm-x86/unistd_64.h>
#undef __SYSCALL
#define __SYSCALL(nr, sym) [ nr ] = sym,
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
typedef void (*sys_call_ptr_t)(void);
workaround will setup a 1:1 mapping for the first
16M to make floppy (an ISA device) work.
+config INTR_REMAP
+ bool "Support for Interrupt Remapping (EXPERIMENTAL)"
+ depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
+ help
+ Supports Interrupt remapping for IO-APIC and MSI devices.
+ To use x2apic mode in the CPU's which support x2APIC enhancements or
+ to support platforms with CPU's having > 8 bit APIC ID, say Y.
+
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
def_bool y
depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
+menuconfig PROCESSOR_SELECT
+ default y
+ bool "Supported processor vendors" if EMBEDDED
+ help
+ This lets you choose what x86 vendor support code your kernel
+ will include.
+
+config CPU_SUP_INTEL
+ default y
+ bool "Support Intel processors" if PROCESSOR_SELECT
+ help
+ This enables extended support for Intel processors
+
+config CPU_SUP_CYRIX_32
+ default y
+ bool "Support Cyrix processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for Cyrix processors
+
+config CPU_SUP_AMD
+ default y
+ bool "Support AMD processors" if PROCESSOR_SELECT
+ help
+ This enables extended support for AMD processors
+
+config CPU_SUP_CENTAUR_32
+ default y
+ bool "Support Centaur processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for Centaur processors
+
+config CPU_SUP_CENTAUR_64
+ default y
+ bool "Support Centaur processors" if PROCESSOR_SELECT
+ depends on 64BIT
+ help
+ This enables extended support for Centaur processors
+
+config CPU_SUP_TRANSMETA_32
+ default y
+ bool "Support Transmeta processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for Transmeta processors
+
+config CPU_SUP_UMC_32
+ default y
+ bool "Support UMC processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for UMC processors
+
config X86_DS
bool "Debug Store support"
default y
u32 e = err_flags[i];
for (j = 0; j < 32; j++) {
- int n = (i << 5)+j;
- if (*msg_strs < n) {
+ if (msg_strs[0] < i ||
+ (msg_strs[0] == i && msg_strs[1] < j)) {
/* Skip to the next string */
- do {
- msg_strs++;
- } while (*msg_strs);
- msg_strs++;
+ msg_strs += 2;
+ while (*msg_strs++)
+ ;
}
if (e & 1) {
- if (*msg_strs == n && msg_strs[1])
- printf("%s ", msg_strs+1);
+ if (msg_strs[0] == i &&
+ msg_strs[1] == j &&
+ msg_strs[2])
+ printf("%s ", msg_strs+2);
else
printf("%d:%d ", i, j);
}
#include <stdio.h>
-#include "../kernel/cpu/feature_names.c"
-
-#if NCAPFLAGS > 8
-# error "Need to adjust the boot code handling of CPUID strings"
-#endif
+#include "../kernel/cpu/capflags.c"
int main(void)
{
- int i;
+ int i, j;
const char *str;
printf("static const char x86_cap_strs[] = \n");
- for (i = 0; i < NCAPINTS*32; i++) {
- str = x86_cap_flags[i];
-
- if (i == NCAPINTS*32-1) {
- /* The last entry must be unconditional; this
- also consumes the compiler-added null character */
- if (!str)
- str = "";
- printf("\t\"\\x%02x\"\"%s\"\n", i, str);
- } else if (str) {
- printf("#if REQUIRED_MASK%d & (1 << %d)\n"
- "\t\"\\x%02x\"\"%s\\0\"\n"
- "#endif\n",
- i >> 5, i & 31, i, str);
+ for (i = 0; i < NCAPINTS; i++) {
+ for (j = 0; j < 32; j++) {
+ str = x86_cap_flags[i*32+j];
+
+ if (i == NCAPINTS-1 && j == 31) {
+ /* The last entry must be unconditional; this
+ also consumes the compiler-added null
+ character */
+ if (!str)
+ str = "";
+ printf("\t\"\\x%02x\\x%02x\"\"%s\"\n",
+ i, j, str);
+ } else if (str) {
+ printf("#if REQUIRED_MASK%d & (1 << %d)\n"
+ "\t\"\\x%02x\\x%02x\"\"%s\\0\"\n"
+ "#endif\n",
+ i, j, i, j, str);
+ }
}
}
printf("\t;\n");
u32 pretcode;
int sig;
struct sigcontext_ia32 sc;
- struct _fpstate_ia32 fpstate;
+ struct _fpstate_ia32 fpstate_unused; /* look at kernel/sigframe.h */
unsigned int extramask[_COMPAT_NSIG_WORDS-1];
char retcode[8];
+ /* fp state follows here */
};
struct rt_sigframe
u32 puc;
compat_siginfo_t info;
struct ucontext_ia32 uc;
- struct _fpstate_ia32 fpstate;
char retcode[8];
+ /* fp state follows here */
};
#define COPY(x) { \
unsigned int *peax)
{
unsigned int tmpflags, gs, oldgs, err = 0;
- struct _fpstate_ia32 __user *buf;
+ void __user *buf;
u32 tmp;
/* Always make any pending restarted system calls return -EINTR */
err |= __get_user(tmp, &sc->fpstate);
buf = compat_ptr(tmp);
- if (buf) {
- if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
- goto badframe;
- err |= restore_i387_ia32(buf);
- } else {
- struct task_struct *me = current;
-
- if (used_math()) {
- clear_fpu(me);
- clear_used_math();
- }
- }
+ err |= restore_i387_xstate_ia32(buf);
err |= __get_user(tmp, &sc->ax);
*peax = tmp;
return err;
-
-badframe:
- return 1;
}
asmlinkage long sys32_sigreturn(struct pt_regs *regs)
*/
static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
- struct _fpstate_ia32 __user *fpstate,
+ void __user *fpstate,
struct pt_regs *regs, unsigned int mask)
{
int tmp, err = 0;
err |= __put_user((u32)regs->flags, &sc->flags);
err |= __put_user((u32)regs->sp, &sc->sp_at_signal);
- tmp = save_i387_ia32(fpstate);
+ tmp = save_i387_xstate_ia32(fpstate);
if (tmp < 0)
err = -EFAULT;
else {
* Determine which stack to use..
*/
static void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
- size_t frame_size)
+ size_t frame_size,
+ void **fpstate)
{
unsigned long sp;
ka->sa.sa_restorer)
sp = (unsigned long) ka->sa.sa_restorer;
+ if (used_math()) {
+ sp = sp - sig_xstate_ia32_size;
+ *fpstate = (struct _fpstate_ia32 *) sp;
+ }
+
sp -= frame_size;
/* Align the stack pointer according to the i386 ABI,
* i.e. so that on function entry ((sp + 4) & 15) == 0. */
struct sigframe __user *frame;
void __user *restorer;
int err = 0;
+ void __user *fpstate = NULL;
/* copy_to_user optimizes that into a single 8 byte store */
static const struct {
0,
};
- frame = get_sigframe(ka, regs, sizeof(*frame));
+ frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
if (err)
goto give_sigsegv;
- err |= ia32_setup_sigcontext(&frame->sc, &frame->fpstate, regs,
- set->sig[0]);
+ err |= ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]);
if (err)
goto give_sigsegv;
struct rt_sigframe __user *frame;
void __user *restorer;
int err = 0;
+ void __user *fpstate = NULL;
/* __copy_to_user optimizes that into a single 8 byte store */
static const struct {
0,
};
- frame = get_sigframe(ka, regs, sizeof(*frame));
+ frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
goto give_sigsegv;
/* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
+ if (cpu_has_xsave)
+ err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+ else
+ err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->sp),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+ err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += process.o
-obj-y += i387.o
+obj-y += i387.o xsave.o
obj-y += ptrace.o
obj-y += ds.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
+obj-$(CONFIG_X86_ES7000) += es7000_32.o
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o
obj-y += vsmp_64.o
obj-$(CONFIG_KPROBES) += kprobes.o
ifeq ($(CONFIG_X86_64),y)
obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
obj-y += bios_uv.o
+ obj-y += genx2apic_cluster.o
+ obj-y += genx2apic_phys.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
obj-$(CONFIG_AUDIT) += audit_64.o
return;
}
-#ifdef CONFIG_X86_32
if (boot_cpu_physical_apicid != -1U)
ver = apic_version[boot_cpu_physical_apicid];
-#endif
generic_processor_info(id, ver);
}
set_fixmap_nocache(FIX_APIC_BASE, address);
if (boot_cpu_physical_apicid == -1U) {
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
-#ifdef CONFIG_X86_32
+ boot_cpu_physical_apicid = read_apic_id();
apic_version[boot_cpu_physical_apicid] =
GET_APIC_VERSION(apic_read(APIC_LVR));
-#endif
}
}
acpi_ioapic = 1;
smp_found_config = 1;
+#ifdef CONFIG_X86_32
setup_apic_routing();
+#endif
}
}
if (error == -EINVAL) {
static int force_enable_local_apic;
int disable_apic;
-/* Local APIC timer verification ok */
-static int local_apic_timer_verify_ok;
/* Disable local APIC timer from the kernel commandline or via dmi quirk */
-static int local_apic_timer_disabled;
+static int disable_apic_timer __cpuinitdata;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
*/
static inline int lapic_is_integrated(void)
{
+#ifdef CONFIG_X86_64
+ return 1;
+#else
return APIC_INTEGRATED(lapic_get_version());
+#endif
}
/*
return lapic_get_version() >= 0x14;
}
-void apic_wait_icr_idle(void)
+/*
+ * Paravirt kernels also might be using these below ops. So we still
+ * use generic apic_read()/apic_write(), which might be pointing to different
+ * ops in PARAVIRT case.
+ */
+void xapic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
-u32 safe_apic_wait_icr_idle(void)
+u32 safe_xapic_wait_icr_idle(void)
{
u32 send_status;
int timeout;
return send_status;
}
+void xapic_icr_write(u32 low, u32 id)
+{
+ apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+ apic_write(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+ u32 icr1, icr2;
+
+ icr2 = apic_read(APIC_ICR2);
+ icr1 = apic_read(APIC_ICR);
+
+ return icr1 | ((u64)icr2 << 32);
+}
+
+static struct apic_ops xapic_ops = {
+ .read = native_apic_mem_read,
+ .write = native_apic_mem_write,
+ .icr_read = xapic_icr_read,
+ .icr_write = xapic_icr_write,
+ .wait_icr_idle = xapic_wait_icr_idle,
+ .safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+EXPORT_SYMBOL_GPL(apic_ops);
+
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
void __cpuinit enable_NMI_through_LVT0(void)
{
- unsigned int v = APIC_DM_NMI;
+ unsigned int v;
- /* Level triggered for 82489DX */
+ /* unmask and set to NMI */
+ v = APIC_DM_NMI;
+
+ /* Level triggered for 82489DX (32bit mode) */
if (!lapic_is_integrated())
v |= APIC_LVT_LEVEL_TRIGGER;
+
apic_write(APIC_LVT0, v);
}
*/
int lapic_get_maxlvt(void)
{
- unsigned int v = apic_read(APIC_LVR);
+ unsigned int v;
- /* 82489DXs do not report # of LVT entries. */
+ v = apic_read(APIC_LVR);
+ /*
+ * - we always have APIC integrated on 64bit mode
+ * - 82489DXs do not report # of LVT entries
+ */
return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
}
* Local APIC timer
*/
-/* Clock divisor is set to 16 */
+/* Clock divisor */
+#ifdef CONFG_X86_64
+#define APIC_DIVISOR 1
+#else
#define APIC_DIVISOR 16
+#endif
/*
* This function sets up the local APIC timer, with a timeout of
* this function twice on the boot CPU, once with a bogus timeout
* value, second time for real. The other (noncalibrating) CPUs
* call this function only once, with the real, calibrated value.
+ *
+ * We do reads before writes even if unnecessary, to get around the
+ * P5 APIC double write bug.
*/
static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
{
*/
tmp_value = apic_read(APIC_TDCR);
apic_write(APIC_TDCR,
- (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
- APIC_TDR_DIV_16);
+ (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+ APIC_TDR_DIV_16);
if (!oneshot)
apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
}
+/*
+ * Setup extended LVT, AMD specific (K8, family 10h)
+ *
+ * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
+ * MCE interrupts are supported. Thus MCE offset must be set to 0.
+ */
+
+#define APIC_EILVT_LVTOFF_MCE 0
+#define APIC_EILVT_LVTOFF_IBS 1
+
+static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
+{
+ unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+ unsigned int v = (mask << 16) | (msg_type << 8) | vector;
+
+ apic_write(reg, v);
+}
+
+u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
+{
+ setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
+ return APIC_EILVT_LVTOFF_MCE;
+}
+
+u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
+{
+ setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
+ return APIC_EILVT_LVTOFF_IBS;
+}
+
/*
* Program the next event, relative to now
*/
unsigned long flags;
unsigned int v;
- /* Lapic used for broadcast ? */
- if (!local_apic_timer_verify_ok)
+ /* Lapic used as dummy for broadcast ? */
+ if (evt->features & CLOCK_EVT_FEAT_DUMMY)
return;
local_irq_save(flags);
return -1;
}
- local_apic_timer_verify_ok = 1;
+ levt->features &= ~CLOCK_EVT_FEAT_DUMMY;
/* We trust the pm timer based calibration */
if (!pm_referenced) {
if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
else
- local_apic_timer_verify_ok = 0;
+ levt->features |= CLOCK_EVT_FEAT_DUMMY;
} else
local_irq_enable();
- if (!local_apic_timer_verify_ok) {
+ if (levt->features & CLOCK_EVT_FEAT_DUMMY) {
printk(KERN_WARNING
"APIC timer disabled due to verification failure.\n");
return -1;
* timer as a dummy clock event source on SMP systems, so the
* broadcast mechanism is used. On UP systems simply ignore it.
*/
- if (local_apic_timer_disabled) {
+ if (disable_apic_timer) {
+ printk(KERN_INFO "Disabling APIC timer\n");
/* No broadcast on UP ! */
if (num_possible_cpus() > 1) {
lapic_clockevent.mult = 1;
/*
* the NMI deadlock-detector uses this.
*/
+#ifdef CONFIG_X86_64
+ add_pda(apic_timer_irqs, 1);
+#else
per_cpu(irq_stat, cpu).apic_timer_irqs++;
+#endif
evt->event_handler(evt);
}
return -EINVAL;
}
-/*
- * Setup extended LVT, AMD specific (K8, family 10h)
- *
- * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
- * MCE interrupts are supported. Thus MCE offset must be set to 0.
- */
-
-#define APIC_EILVT_LVTOFF_MCE 0
-#define APIC_EILVT_LVTOFF_IBS 1
-
-static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
-{
- unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
- unsigned int v = (mask << 16) | (msg_type << 8) | vector;
- apic_write(reg, v);
-}
-
-u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
-{
- setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
- return APIC_EILVT_LVTOFF_MCE;
-}
-
-u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
-{
- setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
- return APIC_EILVT_LVTOFF_IBS;
-}
-
/*
* Local APIC start and shutdown
*/
}
/* lets not touch this if we didn't frob it */
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
if (maxlvt >= 4)
apic_write(APIC_LVTPC, APIC_LVT_MASKED);
-#ifdef CONFIG_X86_MCE_P4THERMAL
- if (maxlvt >= 5)
- apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
-#endif
/* Integrated APIC (!82489DX) ? */
if (lapic_is_integrated()) {
if (maxlvt > 3)
*/
void disable_local_APIC(void)
{
- unsigned long value;
+ unsigned int value;
clear_local_APIC();
value &= ~APIC_SPIV_APIC_ENABLED;
apic_write(APIC_SPIV, value);
+#ifdef CONFIG_X86_32
/*
* When LAPIC was disabled by the BIOS and enabled by the kernel,
* restore the disabled state.
l &= ~MSR_IA32_APICBASE_ENABLE;
wrmsr(MSR_IA32_APICBASE, l, h);
}
+#endif
}
/*
return;
local_irq_save(flags);
- clear_local_APIC();
- if (enabled_via_apicbase)
+#ifdef CONFIG_X86_32
+ if (!enabled_via_apicbase)
+ clear_local_APIC();
+ else
+#endif
disable_local_APIC();
+
local_irq_restore(flags);
}
*/
reg0 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
+ apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
+ reg1 = apic_read(APIC_ID);
+ apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
+ apic_write(APIC_ID, reg0);
+ if (reg1 != (reg0 ^ APIC_ID_MASK))
+ return 0;
/*
* The next two are just to see if we have sane values.
*/
if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
return;
+
/*
* Wait for idle.
*/
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write(APIC_ICR,
- APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
+ apic_write(APIC_ICR, APIC_DEST_ALLINC |
+ APIC_INT_LEVELTRIG | APIC_DM_INIT);
}
/*
*/
void __init init_bsp_APIC(void)
{
- unsigned long value;
+ unsigned int value;
/*
* Don't do the setup now if we have a SMP BIOS as the
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
+#ifdef CONFIG_X86_32
/* This bit is reserved on P4/Xeon and should be cleared */
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
(boot_cpu_data.x86 == 15))
value &= ~APIC_SPIV_FOCUS_DISABLED;
else
+#endif
value |= APIC_SPIV_FOCUS_DISABLED;
value |= SPURIOUS_APIC_VECTOR;
apic_write(APIC_SPIV, value);
{
unsigned long oldvalue, value, maxlvt;
if (lapic_is_integrated() && !esr_disable) {
+ if (esr_disable) {
+ /*
+ * Something untraceable is creating bad interrupts on
+ * secondary quads ... for the moment, just leave the
+ * ESR disabled - we can't do anything useful with the
+ * errors anyway - mbligh
+ */
+ printk(KERN_INFO "Leaving ESR disabled.\n");
+ return;
+ }
/* !82489DX */
maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
"vector: 0x%08lx after: 0x%08lx\n",
oldvalue, value);
} else {
- if (esr_disable)
- /*
- * Something untraceable is creating bad interrupts on
- * secondary quads ... for the moment, just leave the
- * ESR disabled - we can't do anything useful with the
- * errors anyway - mbligh
- */
- printk(KERN_INFO "Leaving ESR disabled.\n");
- else
- printk(KERN_INFO "No ESR for 82489DX.\n");
+ printk(KERN_INFO "No ESR for 82489DX.\n");
}
}
void __cpuinit end_local_APIC_setup(void)
{
- unsigned long value;
-
lapic_setup_esr();
- /* Disable the local apic timer */
- value = apic_read(APIC_LVTT);
- value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
- apic_write(APIC_LVTT, value);
+
+#ifdef CONFIG_X86_32
+ {
+ unsigned int value;
+ /* Disable the local apic timer */
+ value = apic_read(APIC_LVTT);
+ value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+ apic_write(APIC_LVTT, value);
+ }
+#endif
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
* default configuration (or the MP table is broken).
*/
if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+ boot_cpu_physical_apicid = read_apic_id();
}
* might be zero if read from MP tables. Get it from LAPIC.
*/
#ifdef CONFIG_CRASH_DUMP
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+ boot_cpu_physical_apicid = read_apic_id();
#endif
physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
irq_exit();
}
-#ifdef CONFIG_SMP
-void __init smp_intr_init(void)
-{
- /*
- * IRQ0 must be given a fixed assignment and initialized,
- * because it's used before the IO-APIC is set up.
- */
- set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
-
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPI for invalidation */
- alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
-
- /* IPI for generic function call */
- alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* IPI for single call function */
- set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
- call_function_single_interrupt);
-}
-#endif
-
-/*
- * Initialize APIC interrupts
- */
-void __init apic_intr_init(void)
-{
-#ifdef CONFIG_SMP
- smp_intr_init();
-#endif
- /* self generated IPI for local APIC timer */
- alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
- /* thermal monitor LVT interrupt */
-#ifdef CONFIG_X86_MCE_P4THERMAL
- alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-}
-
/**
* connect_bsp_APIC - attach the APIC to the interrupt system
*/
void __init connect_bsp_APIC(void)
{
+#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Do not trust the local APIC being empty at bootup.
outb(0x70, 0x22);
outb(0x01, 0x23);
}
+#endif
enable_apic_mode();
}
*/
void disconnect_bsp_APIC(int virt_wire_setup)
{
+ unsigned int value;
+
+#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Put the board back into PIC mode (has an effect only on
"entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
- } else {
- /* Go back to Virtual Wire compatibility mode */
- unsigned long value;
+ return;
+ }
+#endif
- /* For the spurious interrupt use vector F, and enable it */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
- value |= 0xf;
- apic_write(APIC_SPIV, value);
+ /* Go back to Virtual Wire compatibility mode */
- if (!virt_wire_setup) {
- /*
- * For LVT0 make it edge triggered, active high,
- * external and enabled
- */
- value = apic_read(APIC_LVT0);
- value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
- apic_write(APIC_LVT0, value);
- } else {
- /* Disable LVT0 */
- apic_write(APIC_LVT0, APIC_LVT_MASKED);
- }
+ /* For the spurious interrupt use vector F, and enable it */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_VECTOR_MASK;
+ value |= APIC_SPIV_APIC_ENABLED;
+ value |= 0xf;
+ apic_write(APIC_SPIV, value);
+ if (!virt_wire_setup) {
/*
- * For LVT1 make it edge triggered, active high, nmi and
- * enabled
+ * For LVT0 make it edge triggered, active high,
+ * external and enabled
*/
- value = apic_read(APIC_LVT1);
- value &= ~(
- APIC_MODE_MASK | APIC_SEND_PENDING |
+ value = apic_read(APIC_LVT0);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
- apic_write(APIC_LVT1, value);
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+ apic_write(APIC_LVT0, value);
+ } else {
+ /* Disable LVT0 */
+ apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
+
+ /*
+ * For LVT1 make it edge triggered, active high,
+ * nmi and enabled
+ */
+ value = apic_read(APIC_LVT1);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+ APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+ value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+ apic_write(APIC_LVT1, value);
}
void __cpuinit generic_processor_info(int apicid, int version)
{
int cpu;
cpumask_t tmp_map;
- physid_mask_t phys_cpu;
/*
* Validate version
}
apic_version[apicid] = version;
- phys_cpu = apicid_to_cpu_present(apicid);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
" Processor ignored.\n", NR_CPUS);
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
- if (apicid == boot_cpu_physical_apicid)
+ physid_set(apicid, phys_cpu_present_map);
+ if (apicid == boot_cpu_physical_apicid) {
/*
* x86_bios_cpu_apicid is required to have processors listed
* in same order as logical cpu numbers. Hence the first
* entry is BSP, and so on.
*/
cpu = 0;
-
+ }
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
+#ifdef CONFIG_X86_32
/*
* Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
* but we need to work other dependencies like SMP_SUSPEND etc
def_to_bigsmp = 1;
}
}
-#ifdef CONFIG_SMP
+#endif
+
+#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
/* are we being called early in kernel startup? */
if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
}
#endif
+
cpu_set(cpu, cpu_possible_map);
cpu_set(cpu, cpu_present_map);
}
#ifdef CONFIG_PM
static struct {
+ /*
+ * 'active' is true if the local APIC was enabled by us and
+ * not the BIOS; this signifies that we are also responsible
+ * for disabling it before entering apm/acpi suspend
+ */
int active;
/* r/w apic fields */
unsigned int apic_id;
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif
local_irq_save(flags);
- /*
- * Make sure the APICBASE points to the right address
- *
- * FIXME! This will be wrong if we ever support suspend on
- * SMP! We'll need to do this as part of the CPU restore!
- */
- rdmsr(MSR_IA32_APICBASE, l, h);
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
- wrmsr(MSR_IA32_APICBASE, l, h);
+#ifdef CONFIG_X86_64
+ if (x2apic)
+ enable_x2apic();
+ else
+#endif
+ {
+ /*
+ * Make sure the APICBASE points to the right address
+ *
+ * FIXME! This will be wrong if we ever support suspend on
+ * SMP! We'll need to do this as part of the CPU restore!
+ */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ l &= ~MSR_IA32_APICBASE_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ }
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
apic_write(APIC_ID, apic_pm_state.apic_id);
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
#endif
apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
+
local_irq_restore(flags);
+
return 0;
}
}
early_param("lapic", parse_lapic);
-static int __init parse_nolapic(char *arg)
+static int __init setup_disableapic(char *arg)
{
disable_apic = 1;
setup_clear_cpu_cap(X86_FEATURE_APIC);
return 0;
}
-early_param("nolapic", parse_nolapic);
+early_param("disableapic", setup_disableapic);
-static int __init parse_disable_lapic_timer(char *arg)
+/* same as disableapic, for compatibility */
+static int __init setup_nolapic(char *arg)
{
- local_apic_timer_disabled = 1;
- return 0;
+ return setup_disableapic(arg);
}
-early_param("nolapic_timer", parse_disable_lapic_timer);
+early_param("nolapic", setup_nolapic);
static int __init parse_lapic_timer_c2_ok(char *arg)
{
}
early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+static int __init parse_disable_apic_timer(char *arg)
+{
+ disable_apic_timer = 1;
+ return 0;
+}
+early_param("noapictimer", parse_disable_apic_timer);
+
+static int __init parse_nolapic_timer(char *arg)
+{
+ disable_apic_timer = 1;
+ return 0;
+}
+early_param("nolapic_timer", parse_nolapic_timer);
+
static int __init apic_set_verbosity(char *arg)
{
- if (!arg)
+ if (!arg) {
+#ifdef CONFIG_X86_64
+ skip_ioapic_setup = 0;
+ ioapic_force = 1;
+ return 0;
+#endif
return -EINVAL;
+ }
- if (strcmp(arg, "debug") == 0)
+ if (strcmp("debug", arg) == 0)
apic_verbosity = APIC_DEBUG;
- else if (strcmp(arg, "verbose") == 0)
+ else if (strcmp("verbose", arg) == 0)
apic_verbosity = APIC_VERBOSE;
+ else {
+ printk(KERN_WARNING "APIC Verbosity level %s not recognised"
+ " use apic=verbose or apic=debug\n", arg);
+ return -EINVAL;
+ }
return 0;
}
#include <linux/clockchips.h>
#include <linux/acpi_pmtmr.h>
#include <linux/module.h>
+#include <linux/dmar.h>
#include <asm/atomic.h>
#include <asm/smp.h>
#include <asm/proto.h>
#include <asm/timex.h>
#include <asm/apic.h>
+#include <asm/i8259.h>
#include <mach_ipi.h>
#include <mach_apic.h>
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
static int disable_apic_timer __cpuinitdata;
static int apic_calibrate_pmtmr __initdata;
int disable_apic;
+int disable_x2apic;
+int x2apic;
+
+/* x2apic enabled before OS handover */
+int x2apic_preenabled;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
static void lapic_timer_broadcast(cpumask_t mask);
static void apic_pm_activate(void);
+/*
+ * The local apic timer can be used for any function which is CPU local.
+ */
static struct clock_event_device lapic_clockevent = {
.name = "lapic",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
}
/*
- * Check, if the APIC is integrated or a seperate chip
+ * Check, if the APIC is integrated or a separate chip
*/
static inline int lapic_is_integrated(void)
{
+#ifdef CONFIG_X86_64
return 1;
+#else
+ return APIC_INTEGRATED(lapic_get_version());
+#endif
}
/*
return lapic_get_version() >= 0x14;
}
-void apic_wait_icr_idle(void)
+/*
+ * Paravirt kernels also might be using these below ops. So we still
+ * use generic apic_read()/apic_write(), which might be pointing to different
+ * ops in PARAVIRT case.
+ */
+void xapic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
-u32 safe_apic_wait_icr_idle(void)
+u32 safe_xapic_wait_icr_idle(void)
{
u32 send_status;
int timeout;
return send_status;
}
+void xapic_icr_write(u32 low, u32 id)
+{
+ apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+ apic_write(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+ u32 icr1, icr2;
+
+ icr2 = apic_read(APIC_ICR2);
+ icr1 = apic_read(APIC_ICR);
+
+ return icr1 | ((u64)icr2 << 32);
+}
+
+static struct apic_ops xapic_ops = {
+ .read = native_apic_mem_read,
+ .write = native_apic_mem_write,
+ .icr_read = xapic_icr_read,
+ .icr_write = xapic_icr_write,
+ .wait_icr_idle = xapic_wait_icr_idle,
+ .safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+EXPORT_SYMBOL_GPL(apic_ops);
+
+static void x2apic_wait_icr_idle(void)
+{
+ /* no need to wait for icr idle in x2apic */
+ return;
+}
+
+static u32 safe_x2apic_wait_icr_idle(void)
+{
+ /* no need to wait for icr idle in x2apic */
+ return 0;
+}
+
+void x2apic_icr_write(u32 low, u32 id)
+{
+ wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
+}
+
+u64 x2apic_icr_read(void)
+{
+ unsigned long val;
+
+ rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
+ return val;
+}
+
+static struct apic_ops x2apic_ops = {
+ .read = native_apic_msr_read,
+ .write = native_apic_msr_write,
+ .icr_read = x2apic_icr_read,
+ .icr_write = x2apic_icr_write,
+ .wait_icr_idle = x2apic_wait_icr_idle,
+ .safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
+};
+
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
/* unmask and set to NMI */
v = APIC_DM_NMI;
+
+ /* Level triggered for 82489DX (32bit mode) */
+ if (!lapic_is_integrated())
+ v |= APIC_LVT_LEVEL_TRIGGER;
+
apic_write(APIC_LVT0, v);
}
*/
int lapic_get_maxlvt(void)
{
- unsigned int v, maxlvt;
+ unsigned int v;
v = apic_read(APIC_LVR);
- maxlvt = GET_APIC_MAXLVT(v);
- return maxlvt;
+ /*
+ * - we always have APIC integrated on 64bit mode
+ * - 82489DXs do not report # of LVT entries
+ */
+ return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
}
+/*
+ * Local APIC timer
+ */
+
+/* Clock divisor */
+#ifdef CONFG_X86_64
+#define APIC_DIVISOR 1
+#else
+#define APIC_DIVISOR 16
+#endif
+
/*
* This function sets up the local APIC timer, with a timeout of
* 'clocks' APIC bus clock. During calibration we actually call
* We do reads before writes even if unnecessary, to get around the
* P5 APIC double write bug.
*/
-
static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
{
unsigned int lvtt_value, tmp_value;
lvtt_value = LOCAL_TIMER_VECTOR;
if (!oneshot)
lvtt_value |= APIC_LVT_TIMER_PERIODIC;
+ if (!lapic_is_integrated())
+ lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
+
if (!irqen)
lvtt_value |= APIC_LVT_MASKED;
* Divide PICLK by 16
*/
tmp_value = apic_read(APIC_TDCR);
- apic_write(APIC_TDCR, (tmp_value
- & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
- | APIC_TDR_DIV_16);
+ apic_write(APIC_TDCR,
+ (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+ APIC_TDR_DIV_16);
if (!oneshot)
- apic_write(APIC_TMICT, clocks);
+ apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
}
/*
lapic_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &lapic_clockevent);
- calibration_result = result / HZ;
+ calibration_result = (result * APIC_DIVISOR) / HZ;
/*
* Do a sanity check on the APIC calibration result
void __init setup_boot_APIC_clock(void)
{
/*
- * The local apic timer can be disabled via the kernel commandline.
- * Register the lapic timer as a dummy clock event source on SMP
- * systems, so the broadcast mechanism is used. On UP systems simply
- * ignore it.
+ * The local apic timer can be disabled via the kernel
+ * commandline or from the CPU detection code. Register the lapic
+ * timer as a dummy clock event source on SMP systems, so the
+ * broadcast mechanism is used. On UP systems simply ignore it.
*/
if (disable_apic_timer) {
printk(KERN_INFO "Disabling APIC timer\n");
return;
}
- printk(KERN_INFO "Using local APIC timer interrupts.\n");
+ apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+ "calibrating APIC timer ...\n");
+
if (calibrate_APIC_clock()) {
/* No broadcast on UP ! */
if (num_possible_cpus() > 1)
printk(KERN_WARNING "APIC timer registered as dummy,"
" due to nmi_watchdog=%d!\n", nmi_watchdog);
+ /* Setup the lapic or request the broadcast */
setup_APIC_timer();
}
/*
* the NMI deadlock-detector uses this.
*/
+#ifdef CONFIG_X86_64
add_pda(apic_timer_irqs, 1);
+#else
+ per_cpu(irq_stat, cpu).apic_timer_irqs++;
+#endif
evt->event_handler(evt);
}
irq_enter();
local_apic_timer_interrupt();
irq_exit();
+
set_irq_regs(old_regs);
}
apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
}
+ /* lets not touch this if we didn't frob it */
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
+ if (maxlvt >= 5) {
+ v = apic_read(APIC_LVTTHMR);
+ apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+ }
+#endif
/*
* Clean APIC state for other OSs:
*/
apic_write(APIC_LVTERR, APIC_LVT_MASKED);
if (maxlvt >= 4)
apic_write(APIC_LVTPC, APIC_LVT_MASKED);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
+
+ /* Integrated APIC (!82489DX) ? */
+ if (lapic_is_integrated()) {
+ if (maxlvt > 3)
+ /* Clear ESR due to Pentium errata 3AP and 11AP */
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ }
}
/**
value = apic_read(APIC_SPIV);
value &= ~APIC_SPIV_APIC_ENABLED;
apic_write(APIC_SPIV, value);
+
+#ifdef CONFIG_X86_32
+ /*
+ * When LAPIC was disabled by the BIOS and enabled by the kernel,
+ * restore the disabled state.
+ */
+ if (enabled_via_apicbase) {
+ unsigned int l, h;
+
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ l &= ~MSR_IA32_APICBASE_ENABLE;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ }
+#endif
}
+/*
+ * If Linux enabled the LAPIC against the BIOS default disable it down before
+ * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and
+ * not power-off. Additionally clear all LVT entries before disable_local_APIC
+ * for the case where Linux didn't enable the LAPIC.
+ */
void lapic_shutdown(void)
{
unsigned long flags;
local_irq_save(flags);
- disable_local_APIC();
+#ifdef CONFIG_X86_32
+ if (!enabled_via_apicbase)
+ clear_local_APIC();
+ else
+#endif
+ disable_local_APIC();
+
local_irq_restore(flags);
}
/*
* The ID register is read/write in a real APIC.
*/
- reg0 = read_apic_id();
+ reg0 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
- reg1 = read_apic_id();
+ reg1 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
apic_write(APIC_ID, reg0);
if (reg1 != (reg0 ^ APIC_ID_MASK))
*/
void __init sync_Arb_IDs(void)
{
- /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
- if (modern_apic())
+ /*
+ * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
+ * needed on AMD.
+ */
+ if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
return;
/*
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
- | APIC_DM_INIT);
+ apic_write(APIC_ICR, APIC_DEST_ALLINC |
+ APIC_INT_LEVELTRIG | APIC_DM_INIT);
}
/*
if (smp_found_config || !cpu_has_apic)
return;
- value = apic_read(APIC_LVR);
-
/*
* Do not trust the local APIC being empty at bootup.
*/
value = apic_read(APIC_SPIV);
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
- value |= APIC_SPIV_FOCUS_DISABLED;
+
+#ifdef CONFIG_X86_32
+ /* This bit is reserved on P4/Xeon and should be cleared */
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ (boot_cpu_data.x86 == 15))
+ value &= ~APIC_SPIV_FOCUS_DISABLED;
+ else
+#endif
+ value |= APIC_SPIV_FOCUS_DISABLED;
value |= SPURIOUS_APIC_VECTOR;
apic_write(APIC_SPIV, value);
*/
apic_write(APIC_LVT0, APIC_DM_EXTINT);
value = APIC_DM_NMI;
+ if (!lapic_is_integrated()) /* 82489DX */
+ value |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT1, value);
}
+static void __cpuinit lapic_setup_esr(void)
+{
+ unsigned long oldvalue, value, maxlvt;
+ if (lapic_is_integrated() && !esr_disable) {
+ if (esr_disable) {
+ /*
+ * Something untraceable is creating bad interrupts on
+ * secondary quads ... for the moment, just leave the
+ * ESR disabled - we can't do anything useful with the
+ * errors anyway - mbligh
+ */
+ printk(KERN_INFO "Leaving ESR disabled.\n");
+ return;
+ }
+ /* !82489DX */
+ maxlvt = lapic_get_maxlvt();
+ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
+ apic_write(APIC_ESR, 0);
+ oldvalue = apic_read(APIC_ESR);
+
+ /* enables sending errors */
+ value = ERROR_APIC_VECTOR;
+ apic_write(APIC_LVTERR, value);
+ /*
+ * spec says clear errors after enabling vector.
+ */
+ if (maxlvt > 3)
+ apic_write(APIC_ESR, 0);
+ value = apic_read(APIC_ESR);
+ if (value != oldvalue)
+ apic_printk(APIC_VERBOSE, "ESR value before enabling "
+ "vector: 0x%08lx after: 0x%08lx\n",
+ oldvalue, value);
+ } else {
+ printk(KERN_INFO "No ESR for 82489DX.\n");
+ }
+}
+
+
/**
* setup_local_APIC - setup the local APIC
*/
preempt_enable();
}
-static void __cpuinit lapic_setup_esr(void)
-{
- unsigned maxlvt = lapic_get_maxlvt();
-
- apic_write(APIC_LVTERR, ERROR_APIC_VECTOR);
- /*
- * spec says clear errors after enabling vector.
- */
- if (maxlvt > 3)
- apic_write(APIC_ESR, 0);
-}
-
void __cpuinit end_local_APIC_setup(void)
{
lapic_setup_esr();
+
+#ifdef CONFIG_X86_32
+ {
+ unsigned int value;
+ /* Disable the local apic timer */
+ value = apic_read(APIC_LVTT);
+ value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+ apic_write(APIC_LVTT, value);
+ }
+#endif
+
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
}
+void check_x2apic(void)
+{
+ int msr, msr2;
+
+ rdmsr(MSR_IA32_APICBASE, msr, msr2);
+
+ if (msr & X2APIC_ENABLE) {
+ printk("x2apic enabled by BIOS, switching to x2apic ops\n");
+ x2apic_preenabled = x2apic = 1;
+ apic_ops = &x2apic_ops;
+ }
+}
+
+void enable_x2apic(void)
+{
+ int msr, msr2;
+
+ rdmsr(MSR_IA32_APICBASE, msr, msr2);
+ if (!(msr & X2APIC_ENABLE)) {
+ printk("Enabling x2apic\n");
+ wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
+ }
+}
+
+void enable_IR_x2apic(void)
+{
+#ifdef CONFIG_INTR_REMAP
+ int ret;
+ unsigned long flags;
+
+ if (!cpu_has_x2apic)
+ return;
+
+ if (!x2apic_preenabled && disable_x2apic) {
+ printk(KERN_INFO
+ "Skipped enabling x2apic and Interrupt-remapping "
+ "because of nox2apic\n");
+ return;
+ }
+
+ if (x2apic_preenabled && disable_x2apic)
+ panic("Bios already enabled x2apic, can't enforce nox2apic");
+
+ if (!x2apic_preenabled && skip_ioapic_setup) {
+ printk(KERN_INFO
+ "Skipped enabling x2apic and Interrupt-remapping "
+ "because of skipping io-apic setup\n");
+ return;
+ }
+
+ ret = dmar_table_init();
+ if (ret) {
+ printk(KERN_INFO
+ "dmar_table_init() failed with %d:\n", ret);
+
+ if (x2apic_preenabled)
+ panic("x2apic enabled by bios. But IR enabling failed");
+ else
+ printk(KERN_INFO
+ "Not enabling x2apic,Intr-remapping\n");
+ return;
+ }
+
+ local_irq_save(flags);
+ mask_8259A();
+ save_mask_IO_APIC_setup();
+
+ ret = enable_intr_remapping(1);
+
+ if (ret && x2apic_preenabled) {
+ local_irq_restore(flags);
+ panic("x2apic enabled by bios. But IR enabling failed");
+ }
+
+ if (ret)
+ goto end;
+
+ if (!x2apic) {
+ x2apic = 1;
+ apic_ops = &x2apic_ops;
+ enable_x2apic();
+ }
+end:
+ if (ret)
+ /*
+ * IR enabling failed
+ */
+ restore_IO_APIC_setup();
+ else
+ reinit_intr_remapped_IO_APIC(x2apic_preenabled);
+
+ unmask_8259A();
+ local_irq_restore(flags);
+
+ if (!ret) {
+ if (!x2apic_preenabled)
+ printk(KERN_INFO
+ "Enabled x2apic and interrupt-remapping\n");
+ else
+ printk(KERN_INFO
+ "Enabled Interrupt-remapping\n");
+ } else
+ printk(KERN_ERR
+ "Failed to enable Interrupt-remapping and x2apic\n");
+#else
+ if (!cpu_has_x2apic)
+ return;
+
+ if (x2apic_preenabled)
+ panic("x2apic enabled prior OS handover,"
+ " enable CONFIG_INTR_REMAP");
+
+ printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping "
+ " and x2apic\n");
+#endif
+
+ return;
+}
+
/*
* Detect and enable local APICs on non-SMP boards.
* Original code written by Keir Fraser.
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+ boot_cpu_physical_apicid = read_apic_id();
}
/**
*/
void __init init_apic_mappings(void)
{
+ if (x2apic) {
+ boot_cpu_physical_apicid = read_apic_id();
+ return;
+ }
+
/*
* If no local APIC can be found then set up a fake all
* zeroes page to simulate the local APIC and another
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+ boot_cpu_physical_apicid = read_apic_id();
}
/*
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
+int apic_version[MAX_APICS];
+
int __init APIC_init_uniprocessor(void)
{
if (disable_apic) {
return -1;
}
+ enable_IR_x2apic();
+ setup_apic_routing();
+
verify_local_APIC();
connect_bsp_APIC();
}
/**
- * * connect_bsp_APIC - attach the APIC to the interrupt system
- * */
+ * connect_bsp_APIC - attach the APIC to the interrupt system
+ */
void __init connect_bsp_APIC(void)
{
+#ifdef CONFIG_X86_32
+ if (pic_mode) {
+ /*
+ * Do not trust the local APIC being empty at bootup.
+ */
+ clear_local_APIC();
+ /*
+ * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's
+ * local APIC to INT and NMI lines.
+ */
+ apic_printk(APIC_VERBOSE, "leaving PIC mode, "
+ "enabling APIC mode.\n");
+ outb(0x70, 0x22);
+ outb(0x01, 0x23);
+ }
+#endif
enable_apic_mode();
}
+/**
+ * disconnect_bsp_APIC - detach the APIC from the interrupt system
+ * @virt_wire_setup: indicates, whether virtual wire mode is selected
+ *
+ * Virtual wire mode is necessary to deliver legacy interrupts even when the
+ * APIC is disabled.
+ */
void disconnect_bsp_APIC(int virt_wire_setup)
{
+ unsigned int value;
+
+#ifdef CONFIG_X86_32
+ if (pic_mode) {
+ /*
+ * Put the board back into PIC mode (has an effect only on
+ * certain older boards). Note that APIC interrupts, including
+ * IPIs, won't work beyond this point! The only exception are
+ * INIT IPIs.
+ */
+ apic_printk(APIC_VERBOSE, "disabling APIC mode, "
+ "entering PIC mode.\n");
+ outb(0x70, 0x22);
+ outb(0x00, 0x23);
+ return;
+ }
+#endif
+
/* Go back to Virtual Wire compatibility mode */
- unsigned long value;
/* For the spurious interrupt use vector F, and enable it */
value = apic_read(APIC_SPIV);
apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
- /* For LVT1 make it edge triggered, active high, nmi and enabled */
+ /*
+ * For LVT1 make it edge triggered, active high,
+ * nmi and enabled
+ */
value = apic_read(APIC_LVT1);
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
int cpu;
cpumask_t tmp_map;
+ /*
+ * Validate version
+ */
+ if (version == 0x0) {
+ printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+ "fixing up to 0x10. (tell your hw vendor)\n",
+ version);
+ version = 0x10;
+ }
+ apic_version[apicid] = version;
+
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
- " Processor ignored.\n", NR_CPUS);
+ " Processor ignored.\n", NR_CPUS);
return;
}
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
+#ifdef CONFIG_X86_32
+ /*
+ * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+ * but we need to work other dependencies like SMP_SUSPEND etc
+ * before this can be done without some confusion.
+ * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+ * - Ashok Raj <ashok.raj@intel.com>
+ */
+ if (max_physical_apicid >= 8) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (!APIC_XAPIC(version)) {
+ def_to_bigsmp = 0;
+ break;
+ }
+ /* If P4 and above fall through */
+ case X86_VENDOR_AMD:
+ def_to_bigsmp = 1;
+ }
+ }
+#endif
+
+#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
/* are we being called early in kernel startup? */
if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
per_cpu(x86_cpu_to_apicid, cpu) = apicid;
per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
}
+#endif
cpu_set(cpu, cpu_possible_map);
cpu_set(cpu, cpu_present_map);
}
+int hard_smp_processor_id(void)
+{
+ return read_apic_id();
+}
+
/*
* Power management
*/
#ifdef CONFIG_PM
static struct {
- /* 'active' is true if the local APIC was enabled by us and
- not the BIOS; this signifies that we are also responsible
- for disabling it before entering apm/acpi suspend */
+ /*
+ * 'active' is true if the local APIC was enabled by us and
+ * not the BIOS; this signifies that we are also responsible
+ * for disabling it before entering apm/acpi suspend
+ */
int active;
/* r/w apic fields */
unsigned int apic_id;
maxlvt = lapic_get_maxlvt();
- apic_pm_state.apic_id = read_apic_id();
+ apic_pm_state.apic_id = apic_read(APIC_ID);
apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
apic_pm_state.apic_ldr = apic_read(APIC_LDR);
apic_pm_state.apic_dfr = apic_read(APIC_DFR);
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_INTEL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif
+
local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
maxlvt = lapic_get_maxlvt();
local_irq_save(flags);
- rdmsr(MSR_IA32_APICBASE, l, h);
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
- wrmsr(MSR_IA32_APICBASE, l, h);
+
+#ifdef CONFIG_X86_64
+ if (x2apic)
+ enable_x2apic();
+ else
+#endif
+ {
+ /*
+ * Make sure the APICBASE points to the right address
+ *
+ * FIXME! This will be wrong if we ever support suspend on
+ * SMP! We'll need to do this as part of the CPU restore!
+ */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ l &= ~MSR_IA32_APICBASE_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ }
+
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
apic_write(APIC_ID, apic_pm_state.apic_id);
apic_write(APIC_DFR, apic_pm_state.apic_dfr);
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_INTEL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
#endif
apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
+
local_irq_restore(flags);
+
return 0;
}
+/*
+ * This device has no shutdown method - fully functioning local APICs
+ * are needed on every CPU up until machine_halt/restart/poweroff.
+ */
+
static struct sysdev_class lapic_sysclass = {
.name = "lapic",
.resume = lapic_resume,
return (clusters > 2);
}
-/*
- * APIC command line parameters
- */
-static int __init apic_set_verbosity(char *str)
+static __init int setup_nox2apic(char *str)
{
- if (str == NULL) {
- skip_ioapic_setup = 0;
- ioapic_force = 1;
- return 0;
- }
- if (strcmp("debug", str) == 0)
- apic_verbosity = APIC_DEBUG;
- else if (strcmp("verbose", str) == 0)
- apic_verbosity = APIC_VERBOSE;
- else {
- printk(KERN_WARNING "APIC Verbosity level %s not recognised"
- " use apic=verbose or apic=debug\n", str);
- return -EINVAL;
- }
-
+ disable_x2apic = 1;
+ clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC);
return 0;
}
-early_param("apic", apic_set_verbosity);
+early_param("nox2apic", setup_nox2apic);
+
-static __init int setup_disableapic(char *str)
+/*
+ * APIC command line parameters
+ */
+static int __init setup_disableapic(char *arg)
{
disable_apic = 1;
setup_clear_cpu_cap(X86_FEATURE_APIC);
early_param("disableapic", setup_disableapic);
/* same as disableapic, for compatibility */
-static __init int setup_nolapic(char *str)
+static int __init setup_nolapic(char *arg)
{
- return setup_disableapic(str);
+ return setup_disableapic(arg);
}
early_param("nolapic", setup_nolapic);
}
early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-static __init int setup_noapictimer(char *str)
+static int __init parse_disable_apic_timer(char *arg)
{
- if (str[0] != ' ' && str[0] != 0)
- return 0;
disable_apic_timer = 1;
- return 1;
+ return 0;
}
-__setup("noapictimer", setup_noapictimer);
+early_param("noapictimer", parse_disable_apic_timer);
+
+static int __init parse_nolapic_timer(char *arg)
+{
+ disable_apic_timer = 1;
+ return 0;
+}
+early_param("nolapic_timer", parse_nolapic_timer);
static __init int setup_apicpmtimer(char *s)
{
}
__setup("apicpmtimer", setup_apicpmtimer);
+static int __init apic_set_verbosity(char *arg)
+{
+ if (!arg) {
+#ifdef CONFIG_X86_64
+ skip_ioapic_setup = 0;
+ ioapic_force = 1;
+ return 0;
+#endif
+ return -EINVAL;
+ }
+
+ if (strcmp("debug", arg) == 0)
+ apic_verbosity = APIC_DEBUG;
+ else if (strcmp("verbose", arg) == 0)
+ apic_verbosity = APIC_VERBOSE;
+ else {
+ printk(KERN_WARNING "APIC Verbosity level %s not recognised"
+ " use apic=verbose or apic=debug\n", arg);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+early_param("apic", apic_set_verbosity);
+
static int __init lapic_insert_resource(void)
{
if (!apic_phys)
#
obj-y := intel_cacheinfo.o addon_cpuid_features.o
-obj-y += proc.o feature_names.o
-
-obj-$(CONFIG_X86_32) += common.o bugs.o
-obj-$(CONFIG_X86_64) += common_64.o bugs_64.o
-obj-$(CONFIG_X86_32) += amd.o
-obj-$(CONFIG_X86_64) += amd_64.o
-obj-$(CONFIG_X86_32) += cyrix.o
-obj-$(CONFIG_X86_32) += centaur.o
-obj-$(CONFIG_X86_64) += centaur_64.o
-obj-$(CONFIG_X86_32) += transmeta.o
-obj-$(CONFIG_X86_32) += intel.o
-obj-$(CONFIG_X86_64) += intel_64.o
-obj-$(CONFIG_X86_32) += umc.o
+obj-y += proc.o capflags.o powerflags.o common.o
+
+obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o
+obj-$(CONFIG_X86_64) += bugs_64.o
+
+obj-$(CONFIG_CPU_SUP_INTEL) += intel.o
+obj-$(CONFIG_CPU_SUP_AMD) += amd.o
+obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_32) += centaur.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_64) += centaur_64.o
+obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o
+obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o
obj-$(CONFIG_X86_MCE) += mcheck/
obj-$(CONFIG_MTRR) += mtrr/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o
+
+quiet_cmd_mkcapflags = MKCAP $@
+ cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@
+
+cpufeature = $(src)/../../../../include/asm-x86/cpufeature.h
+
+targets += capflags.c
+$(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.pl FORCE
+ $(call if_changed,mkcapflags)
#include <asm/pat.h>
#include <asm/processor.h>
+#include <mach_apic.h>
+
struct cpuid_bit {
u16 feature;
u8 reg;
}
}
+/* leaf 0xb SMT level */
+#define SMT_LEVEL 0
+
+/* leaf 0xb sub-leaf types */
+#define INVALID_TYPE 0
+#define SMT_TYPE 1
+#define CORE_TYPE 2
+
+#define LEAFB_SUBTYPE(ecx) (((ecx) >> 8) & 0xff)
+#define BITS_SHIFT_NEXT_LEVEL(eax) ((eax) & 0x1f)
+#define LEVEL_MAX_SIBLINGS(ebx) ((ebx) & 0xffff)
+
+/*
+ * Check for extended topology enumeration cpuid leaf 0xb and if it
+ * exists, use it for populating initial_apicid and cpu topology
+ * detection.
+ */
+void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+ unsigned int eax, ebx, ecx, edx, sub_index;
+ unsigned int ht_mask_width, core_plus_mask_width;
+ unsigned int core_select_mask, core_level_siblings;
+
+ if (c->cpuid_level < 0xb)
+ return;
+
+ cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx);
+
+ /*
+ * check if the cpuid leaf 0xb is actually implemented.
+ */
+ if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE))
+ return;
+
+ set_cpu_cap(c, X86_FEATURE_XTOPOLOGY);
+
+ /*
+ * initial apic id, which also represents 32-bit extended x2apic id.
+ */
+ c->initial_apicid = edx;
+
+ /*
+ * Populate HT related information from sub-leaf level 0.
+ */
+ core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx);
+ core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+
+ sub_index = 1;
+ do {
+ cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx);
+
+ /*
+ * Check for the Core type in the implemented sub leaves.
+ */
+ if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) {
+ core_level_siblings = LEVEL_MAX_SIBLINGS(ebx);
+ core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax);
+ break;
+ }
+
+ sub_index++;
+ } while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE);
+
+ core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width;
+
+#ifdef CONFIG_X86_32
+ c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width)
+ & core_select_mask;
+ c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width);
+#else
+ c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask;
+ c->phys_proc_id = phys_pkg_id(core_plus_mask_width);
+#endif
+ c->x86_max_cores = (core_level_siblings / smp_num_siblings);
+
+
+ printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
+ c->phys_proc_id);
+ if (c->x86_max_cores > 1)
+ printk(KERN_INFO "CPU: Processor Core ID: %d\n",
+ c->cpu_core_id);
+ return;
+#endif
+}
+
#ifdef CONFIG_X86_PAT
void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
{
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/mm.h>
+
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/apic.h>
+#ifdef CONFIG_X86_64
+# include <asm/numa_64.h>
+# include <asm/mmconfig.h>
+# include <asm/cacheflush.h>
+#endif
+
#include <mach_apic.h>
+
#include "cpu.h"
+#ifdef CONFIG_X86_32
/*
* B step AMD K6 before B 9730xxxx have hardware bugs that can cause
* misexecution of code under Linux. Owners of such processors should
extern void vide(void);
__asm__(".align 4\nvide: ret");
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
{
- if (cpuid_eax(0x80000000) >= 0x80000007) {
- c->x86_power = cpuid_edx(0x80000007);
- if (c->x86_power & (1<<8))
- set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+/*
+ * General Systems BIOSen alias the cpu frequency registers
+ * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+ * drivers subsequently pokes it, and changes the CPU speed.
+ * Workaround : Remove the unneeded alias.
+ */
+#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
+#define CBAR_ENB (0x80000000)
+#define CBAR_KEY (0X000000CB)
+ if (c->x86_model == 9 || c->x86_model == 10) {
+ if (inl (CBAR) & CBAR_ENB)
+ outl (0 | CBAR_KEY, CBAR);
}
-
- /* Set MTRR capability flag if appropriate */
- if (c->x86_model == 13 || c->x86_model == 9 ||
- (c->x86_model == 8 && c->x86_mask >= 8))
- set_cpu_cap(c, X86_FEATURE_K6_MTRR);
}
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+
+static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
{
u32 l, h;
int mbytes = num_physpages >> (20-PAGE_SHIFT);
- int r;
+ if (c->x86_model < 6) {
+ /* Based on AMD doc 20734R - June 2000 */
+ if (c->x86_model == 0) {
+ clear_cpu_cap(c, X86_FEATURE_APIC);
+ set_cpu_cap(c, X86_FEATURE_PGE);
+ }
+ return;
+ }
+
+ if (c->x86_model == 6 && c->x86_mask == 1) {
+ const int K6_BUG_LOOP = 1000000;
+ int n;
+ void (*f_vide)(void);
+ unsigned long d, d2;
+
+ printk(KERN_INFO "AMD K6 stepping B detected - ");
+
+ /*
+ * It looks like AMD fixed the 2.6.2 bug and improved indirect
+ * calls at the same time.
+ */
+
+ n = K6_BUG_LOOP;
+ f_vide = vide;
+ rdtscl(d);
+ while (n--)
+ f_vide();
+ rdtscl(d2);
+ d = d2-d;
+
+ if (d > 20*K6_BUG_LOOP)
+ printk("system stability may be impaired when more than 32 MB are used.\n");
+ else
+ printk("probably OK (after B9730xxxx).\n");
+ printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
+ }
+
+ /* K6 with old style WHCR */
+ if (c->x86_model < 8 ||
+ (c->x86_model == 8 && c->x86_mask < 8)) {
+ /* We can only write allocate on the low 508Mb */
+ if (mbytes > 508)
+ mbytes = 508;
+
+ rdmsr(MSR_K6_WHCR, l, h);
+ if ((l&0x0000FFFF) == 0) {
+ unsigned long flags;
+ l = (1<<0)|((mbytes/4)<<1);
+ local_irq_save(flags);
+ wbinvd();
+ wrmsr(MSR_K6_WHCR, l, h);
+ local_irq_restore(flags);
+ printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+ mbytes);
+ }
+ return;
+ }
+
+ if ((c->x86_model == 8 && c->x86_mask > 7) ||
+ c->x86_model == 9 || c->x86_model == 13) {
+ /* The more serious chips .. */
+
+ if (mbytes > 4092)
+ mbytes = 4092;
+
+ rdmsr(MSR_K6_WHCR, l, h);
+ if ((l&0xFFFF0000) == 0) {
+ unsigned long flags;
+ l = ((mbytes>>2)<<22)|(1<<16);
+ local_irq_save(flags);
+ wbinvd();
+ wrmsr(MSR_K6_WHCR, l, h);
+ local_irq_restore(flags);
+ printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+ mbytes);
+ }
+
+ return;
+ }
+
+ if (c->x86_model == 10) {
+ /* AMD Geode LX is model 10 */
+ /* placeholder for any needed mods */
+ return;
+ }
+}
+
+static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
+{
+ u32 l, h;
+
+ /*
+ * Bit 15 of Athlon specific MSR 15, needs to be 0
+ * to enable SSE on Palomino/Morgan/Barton CPU's.
+ * If the BIOS didn't enable it already, enable it here.
+ */
+ if (c->x86_model >= 6 && c->x86_model <= 10) {
+ if (!cpu_has(c, X86_FEATURE_XMM)) {
+ printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+ rdmsr(MSR_K7_HWCR, l, h);
+ l &= ~0x00008000;
+ wrmsr(MSR_K7_HWCR, l, h);
+ set_cpu_cap(c, X86_FEATURE_XMM);
+ }
+ }
+
+ /*
+ * It's been determined by AMD that Athlons since model 8 stepping 1
+ * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
+ * As per AMD technical note 27212 0.2
+ */
+ if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
+ rdmsr(MSR_K7_CLK_CTL, l, h);
+ if ((l & 0xfff00000) != 0x20000000) {
+ printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
+ ((l & 0x000fffff)|0x20000000));
+ wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
+ }
+ }
+
+ set_cpu_cap(c, X86_FEATURE_K7);
+}
+#endif
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+static int __cpuinit nearby_node(int apicid)
+{
+ int i, node;
+
+ for (i = apicid - 1; i >= 0; i--) {
+ node = apicid_to_node[i];
+ if (node != NUMA_NO_NODE && node_online(node))
+ return node;
+ }
+ for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
+ node = apicid_to_node[i];
+ if (node != NUMA_NO_NODE && node_online(node))
+ return node;
+ }
+ return first_node(node_online_map); /* Shouldn't happen */
+}
+#endif
+
+/*
+ * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
+ * Assumes number of cores is a power of two.
+ */
+static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_HT
+ unsigned bits;
+
+ bits = c->x86_coreid_bits;
+
+ /* Low order bits define the core id (index of core in socket) */
+ c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
+ /* Convert the initial APIC ID into the socket ID */
+ c->phys_proc_id = c->initial_apicid >> bits;
+#endif
+}
+
+static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
+{
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+ int cpu = smp_processor_id();
+ int node;
+ unsigned apicid = hard_smp_processor_id();
+
+ node = c->phys_proc_id;
+ if (apicid_to_node[apicid] != NUMA_NO_NODE)
+ node = apicid_to_node[apicid];
+ if (!node_online(node)) {
+ /* Two possibilities here:
+ - The CPU is missing memory and no node was created.
+ In that case try picking one from a nearby CPU
+ - The APIC IDs differ from the HyperTransport node IDs
+ which the K8 northbridge parsing fills in.
+ Assume they are all increased by a constant offset,
+ but in the same order as the HT nodeids.
+ If that doesn't result in a usable node fall back to the
+ path for the previous case. */
+
+ int ht_nodeid = c->initial_apicid;
+
+ if (ht_nodeid >= 0 &&
+ apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+ node = apicid_to_node[ht_nodeid];
+ /* Pick a nearby node */
+ if (!node_online(node))
+ node = nearby_node(apicid);
+ }
+ numa_set_node(cpu, node);
+
+ printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
+
+static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_HT
+ unsigned bits, ecx;
+
+ /* Multi core CPU? */
+ if (c->extended_cpuid_level < 0x80000008)
+ return;
+
+ ecx = cpuid_ecx(0x80000008);
+
+ c->x86_max_cores = (ecx & 0xff) + 1;
+
+ /* CPU telling us the core id bits shift? */
+ bits = (ecx >> 12) & 0xF;
+
+ /* Otherwise recompute */
+ if (bits == 0) {
+ while ((1 << bits) < c->x86_max_cores)
+ bits++;
+ }
+
+ c->x86_coreid_bits = bits;
+#endif
+}
+
+static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+{
+ early_init_amd_mc(c);
+
+ /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
+ if (c->x86_power & (1<<8))
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+#ifdef CONFIG_X86_64
+ set_cpu_cap(c, X86_FEATURE_SYSCALL32);
+#else
+ /* Set MTRR capability flag if appropriate */
+ if (c->x86 == 5)
+ if (c->x86_model == 13 || c->x86_model == 9 ||
+ (c->x86_model == 8 && c->x86_mask >= 8))
+ set_cpu_cap(c, X86_FEATURE_K6_MTRR);
+#endif
+}
+
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
+{
#ifdef CONFIG_SMP
unsigned long long value;
* Errata 63 for SH-B3 steppings
* Errata 122 for all steppings (F+ have it disabled by default)
*/
- if (c->x86 == 15) {
+ if (c->x86 == 0xf) {
rdmsrl(MSR_K7_HWCR, value);
value |= 1 << 6;
wrmsrl(MSR_K7_HWCR, value);
early_init_amd(c);
- /*
- * FIXME: We should handle the K5 here. Set up the write
- * range and also turn on MSR 83 bits 4 and 31 (write alloc,
- * no bus pipeline)
- */
-
/*
* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
* 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
*/
clear_cpu_cap(c, 0*32+31);
- r = get_model_name(c);
+#ifdef CONFIG_X86_64
+ /* On C+ stepping K8 rep microcode works well for copy/memset */
+ if (c->x86 == 0xf) {
+ u32 level;
- switch (c->x86) {
- case 4:
- /*
- * General Systems BIOSen alias the cpu frequency registers
- * of the Elan at 0x000df000. Unfortuantly, one of the Linux
- * drivers subsequently pokes it, and changes the CPU speed.
- * Workaround : Remove the unneeded alias.
- */
-#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
-#define CBAR_ENB (0x80000000)
-#define CBAR_KEY (0X000000CB)
- if (c->x86_model == 9 || c->x86_model == 10) {
- if (inl (CBAR) & CBAR_ENB)
- outl (0 | CBAR_KEY, CBAR);
- }
- break;
- case 5:
- if (c->x86_model < 6) {
- /* Based on AMD doc 20734R - June 2000 */
- if (c->x86_model == 0) {
- clear_cpu_cap(c, X86_FEATURE_APIC);
- set_cpu_cap(c, X86_FEATURE_PGE);
- }
- break;
- }
-
- if (c->x86_model == 6 && c->x86_mask == 1) {
- const int K6_BUG_LOOP = 1000000;
- int n;
- void (*f_vide)(void);
- unsigned long d, d2;
-
- printk(KERN_INFO "AMD K6 stepping B detected - ");
-
- /*
- * It looks like AMD fixed the 2.6.2 bug and improved indirect
- * calls at the same time.
- */
-
- n = K6_BUG_LOOP;
- f_vide = vide;
- rdtscl(d);
- while (n--)
- f_vide();
- rdtscl(d2);
- d = d2-d;
-
- if (d > 20*K6_BUG_LOOP)
- printk("system stability may be impaired when more than 32 MB are used.\n");
- else
- printk("probably OK (after B9730xxxx).\n");
- printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
- }
-
- /* K6 with old style WHCR */
- if (c->x86_model < 8 ||
- (c->x86_model == 8 && c->x86_mask < 8)) {
- /* We can only write allocate on the low 508Mb */
- if (mbytes > 508)
- mbytes = 508;
-
- rdmsr(MSR_K6_WHCR, l, h);
- if ((l&0x0000FFFF) == 0) {
- unsigned long flags;
- l = (1<<0)|((mbytes/4)<<1);
- local_irq_save(flags);
- wbinvd();
- wrmsr(MSR_K6_WHCR, l, h);
- local_irq_restore(flags);
- printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
- mbytes);
- }
- break;
- }
-
- if ((c->x86_model == 8 && c->x86_mask > 7) ||
- c->x86_model == 9 || c->x86_model == 13) {
- /* The more serious chips .. */
-
- if (mbytes > 4092)
- mbytes = 4092;
-
- rdmsr(MSR_K6_WHCR, l, h);
- if ((l&0xFFFF0000) == 0) {
- unsigned long flags;
- l = ((mbytes>>2)<<22)|(1<<16);
- local_irq_save(flags);
- wbinvd();
- wrmsr(MSR_K6_WHCR, l, h);
- local_irq_restore(flags);
- printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
- mbytes);
- }
-
- break;
- }
-
- if (c->x86_model == 10) {
- /* AMD Geode LX is model 10 */
- /* placeholder for any needed mods */
- break;
- }
- break;
- case 6: /* An Athlon/Duron */
-
- /*
- * Bit 15 of Athlon specific MSR 15, needs to be 0
- * to enable SSE on Palomino/Morgan/Barton CPU's.
- * If the BIOS didn't enable it already, enable it here.
- */
- if (c->x86_model >= 6 && c->x86_model <= 10) {
- if (!cpu_has(c, X86_FEATURE_XMM)) {
- printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
- rdmsr(MSR_K7_HWCR, l, h);
- l &= ~0x00008000;
- wrmsr(MSR_K7_HWCR, l, h);
- set_cpu_cap(c, X86_FEATURE_XMM);
- }
- }
-
- /*
- * It's been determined by AMD that Athlons since model 8 stepping 1
- * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
- * As per AMD technical note 27212 0.2
- */
- if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
- rdmsr(MSR_K7_CLK_CTL, l, h);
- if ((l & 0xfff00000) != 0x20000000) {
- printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
- ((l & 0x000fffff)|0x20000000));
- wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
- }
- }
- break;
+ level = cpuid_eax(1);
+ if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+ set_cpu_cap(c, X86_FEATURE_REP_GOOD);
}
+ if (c->x86 == 0x10 || c->x86 == 0x11)
+ set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+#else
+
+ /*
+ * FIXME: We should handle the K5 here. Set up the write
+ * range and also turn on MSR 83 bits 4 and 31 (write alloc,
+ * no bus pipeline)
+ */
switch (c->x86) {
- case 15:
- /* Use K8 tuning for Fam10h and Fam11h */
- case 0x10:
- case 0x11:
- set_cpu_cap(c, X86_FEATURE_K8);
+ case 4:
+ init_amd_k5(c);
break;
- case 6:
- set_cpu_cap(c, X86_FEATURE_K7);
+ case 5:
+ init_amd_k6(c);
+ break;
+ case 6: /* An Athlon/Duron */
+ init_amd_k7(c);
break;
}
+
+ /* K6s reports MCEs but don't actually have all the MSRs */
+ if (c->x86 < 6)
+ clear_cpu_cap(c, X86_FEATURE_MCE);
+#endif
+
+ /* Enable workaround for FXSAVE leak */
if (c->x86 >= 6)
set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
- display_cacheinfo(c);
-
- if (cpuid_eax(0x80000000) >= 0x80000008)
- c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
+ if (!c->x86_model_id[0]) {
+ switch (c->x86) {
+ case 0xf:
+ /* Should distinguish Models here, but this is only
+ a fallback anyways. */
+ strcpy(c->x86_model_id, "Hammer");
+ break;
+ }
+ }
-#ifdef CONFIG_X86_HT
- /*
- * On a AMD multi core setup the lower bits of the APIC id
- * distinguish the cores.
- */
- if (c->x86_max_cores > 1) {
- int cpu = smp_processor_id();
- unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf;
+ display_cacheinfo(c);
- if (bits == 0) {
- while ((1 << bits) < c->x86_max_cores)
- bits++;
- }
- c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1);
- c->phys_proc_id >>= bits;
- printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
- cpu, c->x86_max_cores, c->cpu_core_id);
+ /* Multi core CPU? */
+ if (c->extended_cpuid_level >= 0x80000008) {
+ amd_detect_cmp(c);
+ srat_detect_node(c);
}
+
+#ifdef CONFIG_X86_32
+ detect_ht(c);
#endif
- if (cpuid_eax(0x80000000) >= 0x80000006) {
- if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000))
+ if (c->extended_cpuid_level >= 0x80000006) {
+ if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000))
num_cache_leaves = 4;
else
num_cache_leaves = 3;
}
- /* K6s reports MCEs but don't actually have all the MSRs */
- if (c->x86 < 6)
- clear_cpu_cap(c, X86_FEATURE_MCE);
+ if (c->x86 >= 0xf && c->x86 <= 0x11)
+ set_cpu_cap(c, X86_FEATURE_K8);
- if (cpu_has_xmm2)
+ if (cpu_has_xmm2) {
+ /* MFENCE stops RDTSC speculation */
set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
+ }
+
+#ifdef CONFIG_X86_64
+ if (c->x86 == 0x10) {
+ /* do this for boot cpu */
+ if (c == &boot_cpu_data)
+ check_enable_amd_mmconf_dmi();
+
+ fam10h_check_enable_mmcfg();
+ }
+
+ if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+ unsigned long long tseg;
+
+ /*
+ * Split up direct mapping around the TSEG SMM area.
+ * Don't do it for gbpages because there seems very little
+ * benefit in doing so.
+ */
+ if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
+ printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+ if ((tseg>>PMD_SHIFT) <
+ (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
+ ((tseg>>PMD_SHIFT) <
+ (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
+ (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+ set_memory_4k((unsigned long)__va(tseg), 1);
+ }
+ }
+#endif
}
+#ifdef CONFIG_X86_32
static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
/* AMD errata T13 (order #21922) */
}
return size;
}
+#endif
static struct cpu_dev amd_cpu_dev __cpuinitdata = {
.c_vendor = "AMD",
.c_ident = { "AuthenticAMD" },
+#ifdef CONFIG_X86_32
.c_models = {
{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
{
}
},
},
+ .c_size_cache = amd_size_cache,
+#endif
.c_early_init = early_init_amd,
.c_init = init_amd,
- .c_size_cache = amd_size_cache,
+ .c_x86_vendor = X86_VENDOR_AMD,
};
-cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
+cpu_dev_register(amd_cpu_dev);
+++ /dev/null
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/numa_64.h>
-#include <asm/mmconfig.h>
-#include <asm/cacheflush.h>
-
-#include <mach_apic.h>
-
-#include "cpu.h"
-
-int force_mwait __cpuinitdata;
-
-#ifdef CONFIG_NUMA
-static int __cpuinit nearby_node(int apicid)
-{
- int i, node;
-
- for (i = apicid - 1; i >= 0; i--) {
- node = apicid_to_node[i];
- if (node != NUMA_NO_NODE && node_online(node))
- return node;
- }
- for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
- node = apicid_to_node[i];
- if (node != NUMA_NO_NODE && node_online(node))
- return node;
- }
- return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned bits;
-#ifdef CONFIG_NUMA
- int cpu = smp_processor_id();
- int node = 0;
- unsigned apicid = hard_smp_processor_id();
-#endif
- bits = c->x86_coreid_bits;
-
- /* Low order bits define the core id (index of core in socket) */
- c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
- /* Convert the initial APIC ID into the socket ID */
- c->phys_proc_id = c->initial_apicid >> bits;
-
-#ifdef CONFIG_NUMA
- node = c->phys_proc_id;
- if (apicid_to_node[apicid] != NUMA_NO_NODE)
- node = apicid_to_node[apicid];
- if (!node_online(node)) {
- /* Two possibilities here:
- - The CPU is missing memory and no node was created.
- In that case try picking one from a nearby CPU
- - The APIC IDs differ from the HyperTransport node IDs
- which the K8 northbridge parsing fills in.
- Assume they are all increased by a constant offset,
- but in the same order as the HT nodeids.
- If that doesn't result in a usable node fall back to the
- path for the previous case. */
-
- int ht_nodeid = c->initial_apicid;
-
- if (ht_nodeid >= 0 &&
- apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
- node = apicid_to_node[ht_nodeid];
- /* Pick a nearby node */
- if (!node_online(node))
- node = nearby_node(apicid);
- }
- numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned bits, ecx;
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level < 0x80000008)
- return;
-
- ecx = cpuid_ecx(0x80000008);
-
- c->x86_max_cores = (ecx & 0xff) + 1;
-
- /* CPU telling us the core id bits shift? */
- bits = (ecx >> 12) & 0xF;
-
- /* Otherwise recompute */
- if (bits == 0) {
- while ((1 << bits) < c->x86_max_cores)
- bits++;
- }
-
- c->x86_coreid_bits = bits;
-
-#endif
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
- early_init_amd_mc(c);
-
- /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
- if (c->x86_power & (1<<8))
- set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
- set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
- unsigned level;
-
-#ifdef CONFIG_SMP
- unsigned long value;
-
- /*
- * Disable TLB flush filter by setting HWCR.FFDIS on K8
- * bit 6 of msr C001_0015
- *
- * Errata 63 for SH-B3 steppings
- * Errata 122 for all steppings (F+ have it disabled by default)
- */
- if (c->x86 == 0xf) {
- rdmsrl(MSR_K8_HWCR, value);
- value |= 1 << 6;
- wrmsrl(MSR_K8_HWCR, value);
- }
-#endif
-
- /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
- clear_cpu_cap(c, 0*32+31);
-
- /* On C+ stepping K8 rep microcode works well for copy/memset */
- if (c->x86 == 0xf) {
- level = cpuid_eax(1);
- if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
- set_cpu_cap(c, X86_FEATURE_REP_GOOD);
- }
- if (c->x86 == 0x10 || c->x86 == 0x11)
- set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-
- /* Enable workaround for FXSAVE leak */
- if (c->x86 >= 6)
- set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
- level = get_model_name(c);
- if (!level) {
- switch (c->x86) {
- case 0xf:
- /* Should distinguish Models here, but this is only
- a fallback anyways. */
- strcpy(c->x86_model_id, "Hammer");
- break;
- }
- }
- display_cacheinfo(c);
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level >= 0x80000008)
- amd_detect_cmp(c);
-
- if (c->extended_cpuid_level >= 0x80000006 &&
- (cpuid_edx(0x80000006) & 0xf000))
- num_cache_leaves = 4;
- else
- num_cache_leaves = 3;
-
- if (c->x86 >= 0xf && c->x86 <= 0x11)
- set_cpu_cap(c, X86_FEATURE_K8);
-
- /* MFENCE stops RDTSC speculation */
- set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-
- if (c->x86 == 0x10) {
- /* do this for boot cpu */
- if (c == &boot_cpu_data)
- check_enable_amd_mmconf_dmi();
-
- fam10h_check_enable_mmcfg();
- }
-
- if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
- unsigned long long tseg;
-
- /*
- * Split up direct mapping around the TSEG SMM area.
- * Don't do it for gbpages because there seems very little
- * benefit in doing so.
- */
- if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
- printk(KERN_DEBUG "tseg: %010llx\n", tseg);
- if ((tseg>>PMD_SHIFT) <
- (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
- ((tseg>>PMD_SHIFT) <
- (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
- (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
- set_memory_4k((unsigned long)__va(tseg), 1);
- }
- }
-}
-
-static struct cpu_dev amd_cpu_dev __cpuinitdata = {
- .c_vendor = "AMD",
- .c_ident = { "AuthenticAMD" },
- .c_early_init = early_init_amd,
- .c_init = init_amd,
-};
-
-cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
-
if (c->x86_model >= 6 && c->x86_model < 9)
set_cpu_cap(c, X86_FEATURE_3DNOW);
- get_model_name(c);
display_cacheinfo(c);
}
.c_early_init = early_init_centaur,
.c_init = init_centaur,
.c_size_cache = centaur_size_cache,
+ .c_x86_vendor = X86_VENDOR_CENTAUR,
};
-cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev);
+cpu_dev_register(centaur_cpu_dev);
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
{
+ early_init_centaur(c);
+
if (c->x86 == 0x6 && c->x86_model >= 0xf) {
c->x86_cache_alignment = c->x86_clflush_size * 2;
- set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
}
set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
.c_ident = { "CentaurHauls" },
.c_early_init = early_init_centaur,
.c_init = init_centaur,
+ .c_x86_vendor = X86_VENDOR_CENTAUR,
};
-cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev);
+cpu_dev_register(centaur_cpu_dev);
--- /dev/null
+/*
+ * cmpxchg*() fallbacks for CPU not supporting these instructions
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#ifndef CONFIG_X86_CMPXCHG
+unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
+{
+ u8 prev;
+ unsigned long flags;
+
+ /* Poor man's cmpxchg for 386. Unsuitable for SMP */
+ local_irq_save(flags);
+ prev = *(u8 *)ptr;
+ if (prev == old)
+ *(u8 *)ptr = new;
+ local_irq_restore(flags);
+ return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u8);
+
+unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
+{
+ u16 prev;
+ unsigned long flags;
+
+ /* Poor man's cmpxchg for 386. Unsuitable for SMP */
+ local_irq_save(flags);
+ prev = *(u16 *)ptr;
+ if (prev == old)
+ *(u16 *)ptr = new;
+ local_irq_restore(flags);
+ return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u16);
+
+unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
+{
+ u32 prev;
+ unsigned long flags;
+
+ /* Poor man's cmpxchg for 386. Unsuitable for SMP */
+ local_irq_save(flags);
+ prev = *(u32 *)ptr;
+ if (prev == old)
+ *(u32 *)ptr = new;
+ local_irq_restore(flags);
+ return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u32);
+#endif
+
+#ifndef CONFIG_X86_CMPXCHG64
+unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
+{
+ u64 prev;
+ unsigned long flags;
+
+ /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
+ local_irq_save(flags);
+ prev = *(u64 *)ptr;
+ if (prev == old)
+ *(u64 *)ptr = new;
+ local_irq_restore(flags);
+ return prev;
+}
+EXPORT_SYMBOL(cmpxchg_486_u64);
+#endif
+
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kgdb.h>
+#include <linux/topology.h>
#include <linux/delay.h>
#include <linux/smp.h>
-#include <linux/module.h>
#include <linux/percpu.h>
-#include <linux/bootmem.h>
-#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/msr.h>
#include <asm/io.h>
+#include <asm/linkage.h>
#include <asm/mmu_context.h>
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
#include <asm/asm.h>
+#include <asm/numa.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
#include <mach_apic.h>
+#include <asm/genapic.h>
#endif
+#include <asm/pda.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/desc.h>
+#include <asm/atomic.h>
+#include <asm/proto.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
#include "cpu.h"
+static struct cpu_dev *this_cpu __cpuinitdata;
+
+#ifdef CONFIG_X86_64
+/* We need valid kernel segments for data and code in long mode too
+ * IRET will check the segment types kkeil 2000/10/28
+ * Also sysret mandates a special GDT layout
+ */
+/* The TLS descriptors are currently at a different place compared to i386.
+ Hopefully nobody expects them at a fixed place (Wine?) */
DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
+ [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
+ [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
+ [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
+ [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
+ [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
+ [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
+} };
+#else
+DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
[GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } },
[GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } },
[GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } },
[GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
[GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } },
} };
+#endif
EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
+#ifdef CONFIG_X86_32
static int cachesize_override __cpuinitdata = -1;
static int disable_x86_serial_nr __cpuinitdata = 1;
-struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
+static int __init cachesize_setup(char *str)
+{
+ get_option(&str, &cachesize_override);
+ return 1;
+}
+__setup("cachesize=", cachesize_setup);
+
+static int __init x86_fxsr_setup(char *s)
+{
+ setup_clear_cpu_cap(X86_FEATURE_FXSR);
+ setup_clear_cpu_cap(X86_FEATURE_XMM);
+ return 1;
+}
+__setup("nofxsr", x86_fxsr_setup);
+
+static int __init x86_sep_setup(char *s)
+{
+ setup_clear_cpu_cap(X86_FEATURE_SEP);
+ return 1;
+}
+__setup("nosep", x86_sep_setup);
+
+/* Standard macro to see if a specific flag is changeable */
+static inline int flag_is_changeable_p(u32 flag)
+{
+ u32 f1, f2;
+
+ asm("pushfl\n\t"
+ "pushfl\n\t"
+ "popl %0\n\t"
+ "movl %0,%1\n\t"
+ "xorl %2,%0\n\t"
+ "pushl %0\n\t"
+ "popfl\n\t"
+ "pushfl\n\t"
+ "popl %0\n\t"
+ "popfl\n\t"
+ : "=&r" (f1), "=&r" (f2)
+ : "ir" (flag));
+
+ return ((f1^f2) & flag) != 0;
+}
+
+/* Probe for the CPUID instruction */
+static int __cpuinit have_cpuid_p(void)
+{
+ return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+ if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
+ /* Disable processor serial number */
+ unsigned long lo, hi;
+ rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
+ lo |= 0x200000;
+ wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
+ printk(KERN_NOTICE "CPU serial number disabled.\n");
+ clear_cpu_cap(c, X86_FEATURE_PN);
+
+ /* Disabling the serial number may affect the cpuid level */
+ c->cpuid_level = cpuid_eax(0);
+ }
+}
+
+static int __init x86_serial_nr_setup(char *s)
+{
+ disable_x86_serial_nr = 0;
+ return 1;
+}
+__setup("serialnumber", x86_serial_nr_setup);
+#else
+static inline int flag_is_changeable_p(u32 flag)
+{
+ return 1;
+}
+/* Probe for the CPUID instruction */
+static inline int have_cpuid_p(void)
+{
+ return 1;
+}
+static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+{
+}
+#endif
+
+/*
+ * Naming convention should be: <Name> [(<Codename>)]
+ * This table only is used unless init_<vendor>() below doesn't set it;
+ * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
+ *
+ */
+
+/* Look up CPU names by table lookup. */
+static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
+{
+ struct cpu_model_info *info;
+
+ if (c->x86_model >= 16)
+ return NULL; /* Range check */
+
+ if (!this_cpu)
+ return NULL;
+
+ info = this_cpu->c_models;
+
+ while (info && info->family) {
+ if (info->family == c->x86)
+ return info->model_names[c->x86_model];
+ info++;
+ }
+ return NULL; /* Not found */
+}
+
+__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+
+/* Current gdt points %fs at the "master" per-cpu area: after this,
+ * it's on the real one. */
+void switch_to_new_gdt(void)
+{
+ struct desc_ptr gdt_descr;
+
+ gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
+ gdt_descr.size = GDT_SIZE - 1;
+ load_gdt(&gdt_descr);
+#ifdef CONFIG_X86_32
+ asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
+#endif
+}
+
+static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
static void __cpuinit default_init(struct cpuinfo_x86 *c)
{
+#ifdef CONFIG_X86_64
+ display_cacheinfo(c);
+#else
/* Not much we can do here... */
/* Check if at least it has cpuid */
if (c->cpuid_level == -1) {
else if (c->x86 == 3)
strcpy(c->x86_model_id, "386");
}
+#endif
}
static struct cpu_dev __cpuinitdata default_cpu = {
.c_init = default_init,
.c_vendor = "Unknown",
+ .c_x86_vendor = X86_VENDOR_UNKNOWN,
};
-static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
-static int __init cachesize_setup(char *str)
-{
- get_option(&str, &cachesize_override);
- return 1;
-}
-__setup("cachesize=", cachesize_setup);
-
-int __cpuinit get_model_name(struct cpuinfo_x86 *c)
+static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
char *p, *q;
- if (cpuid_eax(0x80000000) < 0x80000004)
- return 0;
+ if (c->extended_cpuid_level < 0x80000004)
+ return;
v = (unsigned int *) c->x86_model_id;
cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
while (q <= &c->x86_model_id[48])
*q++ = '\0'; /* Zero-pad the rest */
}
-
- return 1;
}
-
void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
{
- unsigned int n, dummy, ecx, edx, l2size;
+ unsigned int n, dummy, ebx, ecx, edx, l2size;
- n = cpuid_eax(0x80000000);
+ n = c->extended_cpuid_level;
if (n >= 0x80000005) {
- cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
+ cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
- edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
- c->x86_cache_size = (ecx>>24)+(edx>>24);
+ edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+ c->x86_cache_size = (ecx>>24) + (edx>>24);
+#ifdef CONFIG_X86_64
+ /* On K8 L1 TLB is inclusive, so don't count it */
+ c->x86_tlbsize = 0;
+#endif
}
if (n < 0x80000006) /* Some chips just has a large L1. */
return;
- ecx = cpuid_ecx(0x80000006);
+ cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
l2size = ecx >> 16;
+#ifdef CONFIG_X86_64
+ c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
+#else
/* do processor-specific cache resizing */
if (this_cpu->c_size_cache)
l2size = this_cpu->c_size_cache(c, l2size);
if (l2size == 0)
return; /* Again, no L2 cache is possible */
+#endif
c->x86_cache_size = l2size;
printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
- l2size, ecx & 0xFF);
+ l2size, ecx & 0xFF);
}
-/*
- * Naming convention should be: <Name> [(<Codename>)]
- * This table only is used unless init_<vendor>() below doesn't set it;
- * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
- *
- */
-
-/* Look up CPU names by table lookup. */
-static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
+void __cpuinit detect_ht(struct cpuinfo_x86 *c)
{
- struct cpu_model_info *info;
+#ifdef CONFIG_X86_HT
+ u32 eax, ebx, ecx, edx;
+ int index_msb, core_bits;
- if (c->x86_model >= 16)
- return NULL; /* Range check */
+ if (!cpu_has(c, X86_FEATURE_HT))
+ return;
- if (!this_cpu)
- return NULL;
+ if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+ goto out;
- info = this_cpu->c_models;
+ if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
+ return;
- while (info && info->family) {
- if (info->family == c->x86)
- return info->model_names[c->x86_model];
- info++;
+ cpuid(1, &eax, &ebx, &ecx, &edx);
+
+ smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+ if (smp_num_siblings == 1) {
+ printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
+ } else if (smp_num_siblings > 1) {
+
+ if (smp_num_siblings > NR_CPUS) {
+ printk(KERN_WARNING "CPU: Unsupported number of siblings %d",
+ smp_num_siblings);
+ smp_num_siblings = 1;
+ return;
+ }
+
+ index_msb = get_count_order(smp_num_siblings);
+#ifdef CONFIG_X86_64
+ c->phys_proc_id = phys_pkg_id(index_msb);
+#else
+ c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
+#endif
+
+ smp_num_siblings = smp_num_siblings / c->x86_max_cores;
+
+ index_msb = get_count_order(smp_num_siblings);
+
+ core_bits = get_count_order(c->x86_max_cores);
+
+#ifdef CONFIG_X86_64
+ c->cpu_core_id = phys_pkg_id(index_msb) &
+ ((1 << core_bits) - 1);
+#else
+ c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
+ ((1 << core_bits) - 1);
+#endif
}
- return NULL; /* Not found */
-}
+out:
+ if ((c->x86_max_cores * smp_num_siblings) > 1) {
+ printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
+ c->phys_proc_id);
+ printk(KERN_INFO "CPU: Processor Core ID: %d\n",
+ c->cpu_core_id);
+ }
+#endif
+}
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
{
char *v = c->x86_vendor_id;
int i;
static int printed;
for (i = 0; i < X86_VENDOR_NUM; i++) {
- if (cpu_devs[i]) {
- if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
- (cpu_devs[i]->c_ident[1] &&
- !strcmp(v, cpu_devs[i]->c_ident[1]))) {
- c->x86_vendor = i;
- if (!early)
- this_cpu = cpu_devs[i];
- return;
- }
+ if (!cpu_devs[i])
+ break;
+
+ if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
+ (cpu_devs[i]->c_ident[1] &&
+ !strcmp(v, cpu_devs[i]->c_ident[1]))) {
+ this_cpu = cpu_devs[i];
+ c->x86_vendor = this_cpu->c_x86_vendor;
+ return;
}
}
+
if (!printed) {
printed++;
- printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
+ printk(KERN_ERR "CPU: vendor_id '%s' unknown, using generic init.\n", v);
printk(KERN_ERR "CPU: Your system may be unstable.\n");
}
+
c->x86_vendor = X86_VENDOR_UNKNOWN;
this_cpu = &default_cpu;
}
-
-static int __init x86_fxsr_setup(char *s)
-{
- setup_clear_cpu_cap(X86_FEATURE_FXSR);
- setup_clear_cpu_cap(X86_FEATURE_XMM);
- return 1;
-}
-__setup("nofxsr", x86_fxsr_setup);
-
-
-static int __init x86_sep_setup(char *s)
-{
- setup_clear_cpu_cap(X86_FEATURE_SEP);
- return 1;
-}
-__setup("nosep", x86_sep_setup);
-
-
-/* Standard macro to see if a specific flag is changeable */
-static inline int flag_is_changeable_p(u32 flag)
-{
- u32 f1, f2;
-
- asm("pushfl\n\t"
- "pushfl\n\t"
- "popl %0\n\t"
- "movl %0,%1\n\t"
- "xorl %2,%0\n\t"
- "pushl %0\n\t"
- "popfl\n\t"
- "pushfl\n\t"
- "popl %0\n\t"
- "popfl\n\t"
- : "=&r" (f1), "=&r" (f2)
- : "ir" (flag));
-
- return ((f1^f2) & flag) != 0;
-}
-
-
-/* Probe for the CPUID instruction */
-static int __cpuinit have_cpuid_p(void)
-{
- return flag_is_changeable_p(X86_EFLAGS_ID);
-}
-
-void __init cpu_detect(struct cpuinfo_x86 *c)
+void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
{
/* Get vendor name */
cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
(unsigned int *)&c->x86_vendor_id[4]);
c->x86 = 4;
+ /* Intel-defined flags: level 0x00000001 */
if (c->cpuid_level >= 0x00000001) {
u32 junk, tfms, cap0, misc;
cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
- c->x86 = (tfms >> 8) & 15;
- c->x86_model = (tfms >> 4) & 15;
+ c->x86 = (tfms >> 8) & 0xf;
+ c->x86_model = (tfms >> 4) & 0xf;
+ c->x86_mask = tfms & 0xf;
if (c->x86 == 0xf)
c->x86 += (tfms >> 20) & 0xff;
if (c->x86 >= 0x6)
- c->x86_model += ((tfms >> 16) & 0xF) << 4;
- c->x86_mask = tfms & 15;
+ c->x86_model += ((tfms >> 16) & 0xf) << 4;
if (cap0 & (1<<19)) {
- c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8;
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
+ c->x86_cache_alignment = c->x86_clflush_size;
}
}
}
-static void __cpuinit early_get_cap(struct cpuinfo_x86 *c)
+
+static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
{
u32 tfms, xlvl;
- unsigned int ebx;
+ u32 ebx;
- memset(&c->x86_capability, 0, sizeof c->x86_capability);
- if (have_cpuid_p()) {
- /* Intel-defined flags: level 0x00000001 */
- if (c->cpuid_level >= 0x00000001) {
- u32 capability, excap;
- cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
- c->x86_capability[0] = capability;
- c->x86_capability[4] = excap;
- }
+ /* Intel-defined flags: level 0x00000001 */
+ if (c->cpuid_level >= 0x00000001) {
+ u32 capability, excap;
+ cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
+ c->x86_capability[0] = capability;
+ c->x86_capability[4] = excap;
+ }
- /* AMD-defined flags: level 0x80000001 */
- xlvl = cpuid_eax(0x80000000);
- if ((xlvl & 0xffff0000) == 0x80000000) {
- if (xlvl >= 0x80000001) {
- c->x86_capability[1] = cpuid_edx(0x80000001);
- c->x86_capability[6] = cpuid_ecx(0x80000001);
- }
+ /* AMD-defined flags: level 0x80000001 */
+ xlvl = cpuid_eax(0x80000000);
+ c->extended_cpuid_level = xlvl;
+ if ((xlvl & 0xffff0000) == 0x80000000) {
+ if (xlvl >= 0x80000001) {
+ c->x86_capability[1] = cpuid_edx(0x80000001);
+ c->x86_capability[6] = cpuid_ecx(0x80000001);
}
+ }
+#ifdef CONFIG_X86_64
+ if (c->extended_cpuid_level >= 0x80000008) {
+ u32 eax = cpuid_eax(0x80000008);
+
+ c->x86_virt_bits = (eax >> 8) & 0xff;
+ c->x86_phys_bits = eax & 0xff;
}
+#endif
+
+ if (c->extended_cpuid_level >= 0x80000007)
+ c->x86_power = cpuid_edx(0x80000007);
}
+static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_32
+ int i;
+
+ /*
+ * First of all, decide if this is a 486 or higher
+ * It's a 486 if we can modify the AC flag
+ */
+ if (flag_is_changeable_p(X86_EFLAGS_AC))
+ c->x86 = 4;
+ else
+ c->x86 = 3;
+
+ for (i = 0; i < X86_VENDOR_NUM; i++)
+ if (cpu_devs[i] && cpu_devs[i]->c_identify) {
+ c->x86_vendor_id[0] = 0;
+ cpu_devs[i]->c_identify(c);
+ if (c->x86_vendor_id[0]) {
+ get_cpu_vendor(c);
+ break;
+ }
+ }
+#endif
+}
+
/*
* Do minimum CPU detection early.
* Fields really needed: vendor, cpuid_level, family, model, mask,
* WARNING: this function is only called on the BP. Don't add code here
* that is supposed to run on all CPUs.
*/
-static void __init early_cpu_detect(void)
+static void __init early_identify_cpu(struct cpuinfo_x86 *c)
{
- struct cpuinfo_x86 *c = &boot_cpu_data;
-
- c->x86_cache_alignment = 32;
+#ifdef CONFIG_X86_64
+ c->x86_clflush_size = 64;
+#else
c->x86_clflush_size = 32;
+#endif
+ c->x86_cache_alignment = c->x86_clflush_size;
+
+ memset(&c->x86_capability, 0, sizeof c->x86_capability);
+ c->extended_cpuid_level = 0;
+ if (!have_cpuid_p())
+ identify_cpu_without_cpuid(c);
+
+ /* cyrix could have cpuid enabled via c_identify()*/
if (!have_cpuid_p())
return;
cpu_detect(c);
- get_cpu_vendor(c, 1);
+ get_cpu_vendor(c);
- early_get_cap(c);
+ get_cpu_cap(c);
- if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
- cpu_devs[c->x86_vendor]->c_early_init)
- cpu_devs[c->x86_vendor]->c_early_init(c);
+ if (this_cpu->c_early_init)
+ this_cpu->c_early_init(c);
+
+ validate_pat_support(c);
+}
+
+void __init early_cpu_init(void)
+{
+ struct cpu_dev **cdev;
+ int count = 0;
+
+ printk("KERNEL supported cpus:\n");
+ for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
+ struct cpu_dev *cpudev = *cdev;
+ unsigned int j;
+
+ if (count >= X86_VENDOR_NUM)
+ break;
+ cpu_devs[count] = cpudev;
+ count++;
+
+ for (j = 0; j < 2; j++) {
+ if (!cpudev->c_ident[j])
+ continue;
+ printk(" %s %s\n", cpudev->c_vendor,
+ cpudev->c_ident[j]);
+ }
+ }
+
+ early_identify_cpu(&boot_cpu_data);
}
/*
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
{
- u32 tfms, xlvl;
- unsigned int ebx;
-
- if (have_cpuid_p()) {
- /* Get vendor name */
- cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
- (unsigned int *)&c->x86_vendor_id[0],
- (unsigned int *)&c->x86_vendor_id[8],
- (unsigned int *)&c->x86_vendor_id[4]);
-
- get_cpu_vendor(c, 0);
- /* Initialize the standard set of capabilities */
- /* Note that the vendor-specific code below might override */
- /* Intel-defined flags: level 0x00000001 */
- if (c->cpuid_level >= 0x00000001) {
- u32 capability, excap;
- cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
- c->x86_capability[0] = capability;
- c->x86_capability[4] = excap;
- c->x86 = (tfms >> 8) & 15;
- c->x86_model = (tfms >> 4) & 15;
- if (c->x86 == 0xf)
- c->x86 += (tfms >> 20) & 0xff;
- if (c->x86 >= 0x6)
- c->x86_model += ((tfms >> 16) & 0xF) << 4;
- c->x86_mask = tfms & 15;
- c->initial_apicid = (ebx >> 24) & 0xFF;
-#ifdef CONFIG_X86_HT
- c->apicid = phys_pkg_id(c->initial_apicid, 0);
- c->phys_proc_id = c->initial_apicid;
-#else
- c->apicid = c->initial_apicid;
-#endif
- if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
- c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8;
- } else {
- /* Have CPUID level 0 only - unheard of */
- c->x86 = 4;
- }
+ c->extended_cpuid_level = 0;
- /* AMD-defined flags: level 0x80000001 */
- xlvl = cpuid_eax(0x80000000);
- if ((xlvl & 0xffff0000) == 0x80000000) {
- if (xlvl >= 0x80000001) {
- c->x86_capability[1] = cpuid_edx(0x80000001);
- c->x86_capability[6] = cpuid_ecx(0x80000001);
- }
- if (xlvl >= 0x80000004)
- get_model_name(c); /* Default name */
- }
+ if (!have_cpuid_p())
+ identify_cpu_without_cpuid(c);
- init_scattered_cpuid_features(c);
- detect_nopl(c);
- }
-}
+ /* cyrix could have cpuid enabled via c_identify()*/
+ if (!have_cpuid_p())
+ return;
-static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
-{
- if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
- /* Disable processor serial number */
- unsigned long lo, hi;
- rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
- lo |= 0x200000;
- wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
- printk(KERN_NOTICE "CPU serial number disabled.\n");
- clear_cpu_cap(c, X86_FEATURE_PN);
+ cpu_detect(c);
- /* Disabling the serial number may affect the cpuid level */
- c->cpuid_level = cpuid_eax(0);
- }
-}
+ get_cpu_vendor(c);
-static int __init x86_serial_nr_setup(char *s)
-{
- disable_x86_serial_nr = 0;
- return 1;
-}
-__setup("serialnumber", x86_serial_nr_setup);
+ get_cpu_cap(c);
+ if (c->cpuid_level >= 0x00000001) {
+ c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_HT
+ c->apicid = phys_pkg_id(c->initial_apicid, 0);
+# else
+ c->apicid = c->initial_apicid;
+# endif
+#endif
+#ifdef CONFIG_X86_HT
+ c->phys_proc_id = c->initial_apicid;
+#endif
+ }
+
+ get_model_name(c); /* Default name */
+
+ init_scattered_cpuid_features(c);
+ detect_nopl(c);
+}
/*
* This does the hard work of actually picking apart the CPU stuff...
c->loops_per_jiffy = loops_per_jiffy;
c->x86_cache_size = -1;
c->x86_vendor = X86_VENDOR_UNKNOWN;
- c->cpuid_level = -1; /* CPUID not detected */
c->x86_model = c->x86_mask = 0; /* So far unknown... */
c->x86_vendor_id[0] = '\0'; /* Unset */
c->x86_model_id[0] = '\0'; /* Unset */
c->x86_max_cores = 1;
+ c->x86_coreid_bits = 0;
+#ifdef CONFIG_X86_64
+ c->x86_clflush_size = 64;
+#else
+ c->cpuid_level = -1; /* CPUID not detected */
c->x86_clflush_size = 32;
+#endif
+ c->x86_cache_alignment = c->x86_clflush_size;
memset(&c->x86_capability, 0, sizeof c->x86_capability);
- if (!have_cpuid_p()) {
- /*
- * First of all, decide if this is a 486 or higher
- * It's a 486 if we can modify the AC flag
- */
- if (flag_is_changeable_p(X86_EFLAGS_AC))
- c->x86 = 4;
- else
- c->x86 = 3;
- }
-
generic_identify(c);
if (this_cpu->c_identify)
this_cpu->c_identify(c);
+#ifdef CONFIG_X86_64
+ c->apicid = phys_pkg_id(0);
+#endif
+
/*
* Vendor-specific initialization. In this section we
* canonicalize the feature flags, meaning if there are
c->x86, c->x86_model);
}
+#ifdef CONFIG_X86_64
+ detect_ht(c);
+#endif
+
/*
* On SMP, boot_cpu_data holds the common feature set between
* all CPUs; so make sure that we indicate which features are
*/
if (c != &boot_cpu_data) {
/* AND the already accumulated flags with these */
- for (i = 0 ; i < NCAPINTS ; i++)
+ for (i = 0; i < NCAPINTS; i++)
boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
}
for (i = 0; i < NCAPINTS; i++)
c->x86_capability[i] &= ~cleared_cpu_caps[i];
+#ifdef CONFIG_X86_MCE
/* Init Machine Check Exception if available. */
mcheck_init(c);
+#endif
select_idle_routine(c);
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+ numa_add_cpu(smp_processor_id());
+#endif
}
void __init identify_boot_cpu(void)
{
identify_cpu(&boot_cpu_data);
+#ifdef CONFIG_X86_32
sysenter_setup();
enable_sep_cpu();
+#endif
}
void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
{
BUG_ON(c == &boot_cpu_data);
identify_cpu(c);
+#ifdef CONFIG_X86_32
enable_sep_cpu();
+#endif
mtrr_ap_init();
}
-#ifdef CONFIG_X86_HT
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
- u32 eax, ebx, ecx, edx;
- int index_msb, core_bits;
-
- cpuid(1, &eax, &ebx, &ecx, &edx);
-
- if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY))
- return;
-
- smp_num_siblings = (ebx & 0xff0000) >> 16;
+struct msr_range {
+ unsigned min;
+ unsigned max;
+};
- if (smp_num_siblings == 1) {
- printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
- } else if (smp_num_siblings > 1) {
+static struct msr_range msr_range_array[] __cpuinitdata = {
+ { 0x00000000, 0x00000418},
+ { 0xc0000000, 0xc000040b},
+ { 0xc0010000, 0xc0010142},
+ { 0xc0011000, 0xc001103b},
+};
- if (smp_num_siblings > NR_CPUS) {
- printk(KERN_WARNING "CPU: Unsupported number of the "
- "siblings %d", smp_num_siblings);
- smp_num_siblings = 1;
- return;
+static void __cpuinit print_cpu_msr(void)
+{
+ unsigned index;
+ u64 val;
+ int i;
+ unsigned index_min, index_max;
+
+ for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
+ index_min = msr_range_array[i].min;
+ index_max = msr_range_array[i].max;
+ for (index = index_min; index < index_max; index++) {
+ if (rdmsrl_amd_safe(index, &val))
+ continue;
+ printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
}
+ }
+}
- index_msb = get_count_order(smp_num_siblings);
- c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
-
- printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
- c->phys_proc_id);
-
- smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
- index_msb = get_count_order(smp_num_siblings) ;
+static int show_msr __cpuinitdata;
+static __init int setup_show_msr(char *arg)
+{
+ int num;
- core_bits = get_count_order(c->x86_max_cores);
+ get_option(&arg, &num);
- c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
- ((1 << core_bits) - 1);
-
- if (c->x86_max_cores > 1)
- printk(KERN_INFO "CPU: Processor Core ID: %d\n",
- c->cpu_core_id);
- }
+ if (num > 0)
+ show_msr = num;
+ return 1;
}
-#endif
+__setup("show_msr=", setup_show_msr);
static __init int setup_noclflush(char *arg)
{
vendor = c->x86_vendor_id;
if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
- printk("%s ", vendor);
+ printk(KERN_CONT "%s ", vendor);
- if (!c->x86_model_id[0])
- printk("%d86", c->x86);
+ if (c->x86_model_id[0])
+ printk(KERN_CONT "%s", c->x86_model_id);
else
- printk("%s", c->x86_model_id);
+ printk(KERN_CONT "%d86", c->x86);
if (c->x86_mask || c->cpuid_level >= 0)
- printk(" stepping %02x\n", c->x86_mask);
+ printk(KERN_CONT " stepping %02x\n", c->x86_mask);
else
- printk("\n");
+ printk(KERN_CONT "\n");
+
+#ifdef CONFIG_SMP
+ if (c->cpu_index < show_msr)
+ print_cpu_msr();
+#else
+ if (show_msr)
+ print_cpu_msr();
+#endif
}
static __init int setup_disablecpuid(char *arg)
cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-void __init early_cpu_init(void)
+#ifdef CONFIG_X86_64
+struct x8664_pda **_cpu_pda __read_mostly;
+EXPORT_SYMBOL(_cpu_pda);
+
+struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
+
+char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
+
+void __cpuinit pda_init(int cpu)
+{
+ struct x8664_pda *pda = cpu_pda(cpu);
+
+ /* Setup up data that may be needed in __get_free_pages early */
+ loadsegment(fs, 0);
+ loadsegment(gs, 0);
+ /* Memory clobbers used to order PDA accessed */
+ mb();
+ wrmsrl(MSR_GS_BASE, pda);
+ mb();
+
+ pda->cpunumber = cpu;
+ pda->irqcount = -1;
+ pda->kernelstack = (unsigned long)stack_thread_info() -
+ PDA_STACKOFFSET + THREAD_SIZE;
+ pda->active_mm = &init_mm;
+ pda->mmu_state = 0;
+
+ if (cpu == 0) {
+ /* others are initialized in smpboot.c */
+ pda->pcurrent = &init_task;
+ pda->irqstackptr = boot_cpu_stack;
+ pda->irqstackptr += IRQSTACKSIZE - 64;
+ } else {
+ if (!pda->irqstackptr) {
+ pda->irqstackptr = (char *)
+ __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+ if (!pda->irqstackptr)
+ panic("cannot allocate irqstack for cpu %d",
+ cpu);
+ pda->irqstackptr += IRQSTACKSIZE - 64;
+ }
+
+ if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
+ pda->nodenumber = cpu_to_node(cpu);
+ }
+}
+
+char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
+ DEBUG_STKSZ] __page_aligned_bss;
+
+extern asmlinkage void ignore_sysret(void);
+
+/* May not be marked __init: used by software suspend */
+void syscall_init(void)
{
- struct cpu_vendor_dev *cvdev;
+ /*
+ * LSTAR and STAR live in a bit strange symbiosis.
+ * They both write to the same internal register. STAR allows to
+ * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
+ */
+ wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32);
+ wrmsrl(MSR_LSTAR, system_call);
+ wrmsrl(MSR_CSTAR, ignore_sysret);
- for (cvdev = __x86cpuvendor_start ;
- cvdev < __x86cpuvendor_end ;
- cvdev++)
- cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
+#ifdef CONFIG_IA32_EMULATION
+ syscall32_cpu_init();
+#endif
- early_cpu_detect();
- validate_pat_support(&boot_cpu_data);
+ /* Flags to clear on syscall */
+ wrmsrl(MSR_SYSCALL_MASK,
+ X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
}
+unsigned long kernel_eflags;
+
+/*
+ * Copies of the original ist values from the tss are only accessed during
+ * debugging, no special alignment required.
+ */
+DEFINE_PER_CPU(struct orig_ist, orig_ist);
+
+#else
+
/* Make sure %fs is initialized properly in idle threads */
struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
{
regs->fs = __KERNEL_PERCPU;
return regs;
}
-
-/* Current gdt points %fs at the "master" per-cpu area: after this,
- * it's on the real one. */
-void switch_to_new_gdt(void)
-{
- struct desc_ptr gdt_descr;
-
- gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
- gdt_descr.size = GDT_SIZE - 1;
- load_gdt(&gdt_descr);
- asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
-}
+#endif
/*
* cpu_init() initializes state that is per-CPU. Some data is already
* initialized (naturally) in the bootstrap process, such as the GDT
* and IDT. We reload them nevertheless, this function acts as a
* 'CPU state barrier', nothing should get across.
+ * A lot of state is already set up in PDA init for 64 bit
*/
+#ifdef CONFIG_X86_64
+void __cpuinit cpu_init(void)
+{
+ int cpu = stack_smp_processor_id();
+ struct tss_struct *t = &per_cpu(init_tss, cpu);
+ struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
+ unsigned long v;
+ char *estacks = NULL;
+ struct task_struct *me;
+ int i;
+
+ /* CPU 0 is initialised in head64.c */
+ if (cpu != 0)
+ pda_init(cpu);
+ else
+ estacks = boot_exception_stacks;
+
+ me = current;
+
+ if (cpu_test_and_set(cpu, cpu_initialized))
+ panic("CPU#%d already initialized!\n", cpu);
+
+ printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+
+ clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+
+ /*
+ * Initialize the per-CPU GDT with the boot GDT,
+ * and set up the GDT descriptor:
+ */
+
+ switch_to_new_gdt();
+ load_idt((const struct desc_ptr *)&idt_descr);
+
+ memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
+ syscall_init();
+
+ wrmsrl(MSR_FS_BASE, 0);
+ wrmsrl(MSR_KERNEL_GS_BASE, 0);
+ barrier();
+
+ check_efer();
+ if (cpu != 0 && x2apic)
+ enable_x2apic();
+
+ /*
+ * set up and load the per-CPU TSS
+ */
+ if (!orig_ist->ist[0]) {
+ static const unsigned int order[N_EXCEPTION_STACKS] = {
+ [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+ [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+ };
+ for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+ if (cpu) {
+ estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+ if (!estacks)
+ panic("Cannot allocate exception "
+ "stack %ld %d\n", v, cpu);
+ }
+ estacks += PAGE_SIZE << order[v];
+ orig_ist->ist[v] = t->x86_tss.ist[v] =
+ (unsigned long)estacks;
+ }
+ }
+
+ t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+ /*
+ * <= is required because the CPU will access up to
+ * 8 bits beyond the end of the IO permission bitmap.
+ */
+ for (i = 0; i <= IO_BITMAP_LONGS; i++)
+ t->io_bitmap[i] = ~0UL;
+
+ atomic_inc(&init_mm.mm_count);
+ me->active_mm = &init_mm;
+ if (me->mm)
+ BUG();
+ enter_lazy_tlb(&init_mm, me);
+
+ load_sp0(t, ¤t->thread);
+ set_tss_desc(cpu, t);
+ load_TR_desc();
+ load_LDT(&init_mm.context);
+
+#ifdef CONFIG_KGDB
+ /*
+ * If the kgdb is connected no debug regs should be altered. This
+ * is only applicable when KGDB and a KGDB I/O module are built
+ * into the kernel and you are using early debugging with
+ * kgdbwait. KGDB will control the kernel HW breakpoint registers.
+ */
+ if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
+ arch_kgdb_ops.correct_hw_break();
+ else {
+#endif
+ /*
+ * Clear all 6 debug registers:
+ */
+
+ set_debugreg(0UL, 0);
+ set_debugreg(0UL, 1);
+ set_debugreg(0UL, 2);
+ set_debugreg(0UL, 3);
+ set_debugreg(0UL, 6);
+ set_debugreg(0UL, 7);
+#ifdef CONFIG_KGDB
+ /* If the kgdb is connected no debug regs should be altered. */
+ }
+#endif
+
+ fpu_init();
+
+ raw_local_save_flags(kernel_eflags);
+
+ if (is_uv_system())
+ uv_cpu_init();
+}
+
+#else
+
void __cpuinit cpu_init(void)
{
int cpu = smp_processor_id();
/*
* Force FPU initialization:
*/
- current_thread_info()->status = 0;
+ if (cpu_has_xsave)
+ current_thread_info()->status = TS_XSAVE;
+ else
+ current_thread_info()->status = 0;
clear_used_math();
mxcsr_feature_mask_init();
+
+ /*
+ * Boot processor to setup the FP and extended state context info.
+ */
+ if (!smp_processor_id())
+ init_thread_xstate();
+
+ xsave_init();
}
#ifdef CONFIG_HOTPLUG_CPU
per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
}
#endif
+
+#endif
+++ /dev/null
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kgdb.h>
-#include <linux/topology.h>
-#include <linux/delay.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#include <asm/i387.h>
-#include <asm/msr.h>
-#include <asm/io.h>
-#include <asm/linkage.h>
-#include <asm/mmu_context.h>
-#include <asm/mtrr.h>
-#include <asm/mce.h>
-#include <asm/pat.h>
-#include <asm/asm.h>
-#include <asm/numa.h>
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <mach_apic.h>
-#endif
-#include <asm/pda.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/proto.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/genapic.h>
-
-#include "cpu.h"
-
-/* We need valid kernel segments for data and code in long mode too
- * IRET will check the segment types kkeil 2000/10/28
- * Also sysret mandates a special GDT layout
- */
-/* The TLS descriptors are currently at a different place compared to i386.
- Hopefully nobody expects them at a fixed place (Wine?) */
-DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
- [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
- [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
- [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
- [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
- [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
- [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
-} };
-EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
-
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
-/* Current gdt points %fs at the "master" per-cpu area: after this,
- * it's on the real one. */
-void switch_to_new_gdt(void)
-{
- struct desc_ptr gdt_descr;
-
- gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
- gdt_descr.size = GDT_SIZE - 1;
- load_gdt(&gdt_descr);
-}
-
-struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
-
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
- display_cacheinfo(c);
-}
-
-static struct cpu_dev __cpuinitdata default_cpu = {
- .c_init = default_init,
- .c_vendor = "Unknown",
-};
-static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
-
-int __cpuinit get_model_name(struct cpuinfo_x86 *c)
-{
- unsigned int *v;
-
- if (c->extended_cpuid_level < 0x80000004)
- return 0;
-
- v = (unsigned int *) c->x86_model_id;
- cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
- cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
- cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
- c->x86_model_id[48] = 0;
- return 1;
-}
-
-
-void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
-{
- unsigned int n, dummy, ebx, ecx, edx;
-
- n = c->extended_cpuid_level;
-
- if (n >= 0x80000005) {
- cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
- printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
- "D cache %dK (%d bytes/line)\n",
- edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
- c->x86_cache_size = (ecx>>24) + (edx>>24);
- /* On K8 L1 TLB is inclusive, so don't count it */
- c->x86_tlbsize = 0;
- }
-
- if (n >= 0x80000006) {
- cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
- ecx = cpuid_ecx(0x80000006);
- c->x86_cache_size = ecx >> 16;
- c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
-
- printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
- c->x86_cache_size, ecx & 0xFF);
- }
-}
-
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- u32 eax, ebx, ecx, edx;
- int index_msb, core_bits;
-
- cpuid(1, &eax, &ebx, &ecx, &edx);
-
-
- if (!cpu_has(c, X86_FEATURE_HT))
- return;
- if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
- goto out;
-
- smp_num_siblings = (ebx & 0xff0000) >> 16;
-
- if (smp_num_siblings == 1) {
- printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
- } else if (smp_num_siblings > 1) {
-
- if (smp_num_siblings > NR_CPUS) {
- printk(KERN_WARNING "CPU: Unsupported number of "
- "siblings %d", smp_num_siblings);
- smp_num_siblings = 1;
- return;
- }
-
- index_msb = get_count_order(smp_num_siblings);
- c->phys_proc_id = phys_pkg_id(index_msb);
-
- smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
- index_msb = get_count_order(smp_num_siblings);
-
- core_bits = get_count_order(c->x86_max_cores);
-
- c->cpu_core_id = phys_pkg_id(index_msb) &
- ((1 << core_bits) - 1);
- }
-out:
- if ((c->x86_max_cores * smp_num_siblings) > 1) {
- printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
- c->phys_proc_id);
- printk(KERN_INFO "CPU: Processor Core ID: %d\n",
- c->cpu_core_id);
- }
-
-#endif
-}
-
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
-{
- char *v = c->x86_vendor_id;
- int i;
- static int printed;
-
- for (i = 0; i < X86_VENDOR_NUM; i++) {
- if (cpu_devs[i]) {
- if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
- (cpu_devs[i]->c_ident[1] &&
- !strcmp(v, cpu_devs[i]->c_ident[1]))) {
- c->x86_vendor = i;
- this_cpu = cpu_devs[i];
- return;
- }
- }
- }
- if (!printed) {
- printed++;
- printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
- printk(KERN_ERR "CPU: Your system may be unstable.\n");
- }
- c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-static void __init early_cpu_support_print(void)
-{
- int i,j;
- struct cpu_dev *cpu_devx;
-
- printk("KERNEL supported cpus:\n");
- for (i = 0; i < X86_VENDOR_NUM; i++) {
- cpu_devx = cpu_devs[i];
- if (!cpu_devx)
- continue;
- for (j = 0; j < 2; j++) {
- if (!cpu_devx->c_ident[j])
- continue;
- printk(" %s %s\n", cpu_devx->c_vendor,
- cpu_devx->c_ident[j]);
- }
- }
-}
-
-/*
- * The NOPL instruction is supposed to exist on all CPUs with
- * family >= 6, unfortunately, that's not true in practice because
- * of early VIA chips and (more importantly) broken virtualizers that
- * are not easy to detect. Hence, probe for it based on first
- * principles.
- *
- * Note: no 64-bit chip is known to lack these, but put the code here
- * for consistency with 32 bits, and to make it utterly trivial to
- * diagnose the problem should it ever surface.
- */
-static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
-{
- const u32 nopl_signature = 0x888c53b1; /* Random number */
- u32 has_nopl = nopl_signature;
-
- clear_cpu_cap(c, X86_FEATURE_NOPL);
- if (c->x86 >= 6) {
- asm volatile("\n"
- "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
- "2:\n"
- " .section .fixup,\"ax\"\n"
- "3: xor %0,%0\n"
- " jmp 2b\n"
- " .previous\n"
- _ASM_EXTABLE(1b,3b)
- : "+a" (has_nopl));
-
- if (has_nopl == nopl_signature)
- set_cpu_cap(c, X86_FEATURE_NOPL);
- }
-}
-
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
-
-void __init early_cpu_init(void)
-{
- struct cpu_vendor_dev *cvdev;
-
- for (cvdev = __x86cpuvendor_start ;
- cvdev < __x86cpuvendor_end ;
- cvdev++)
- cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
- early_cpu_support_print();
- early_identify_cpu(&boot_cpu_data);
-}
-
-/* Do some early cpuid on the boot CPU to get some parameter that are
- needed before check_bugs. Everything advanced is in identify_cpu
- below. */
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
-{
- u32 tfms, xlvl;
-
- c->loops_per_jiffy = loops_per_jiffy;
- c->x86_cache_size = -1;
- c->x86_vendor = X86_VENDOR_UNKNOWN;
- c->x86_model = c->x86_mask = 0; /* So far unknown... */
- c->x86_vendor_id[0] = '\0'; /* Unset */
- c->x86_model_id[0] = '\0'; /* Unset */
- c->x86_clflush_size = 64;
- c->x86_cache_alignment = c->x86_clflush_size;
- c->x86_max_cores = 1;
- c->x86_coreid_bits = 0;
- c->extended_cpuid_level = 0;
- memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
- /* Get vendor name */
- cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
- (unsigned int *)&c->x86_vendor_id[0],
- (unsigned int *)&c->x86_vendor_id[8],
- (unsigned int *)&c->x86_vendor_id[4]);
-
- get_cpu_vendor(c);
-
- /* Initialize the standard set of capabilities */
- /* Note that the vendor-specific code below might override */
-
- /* Intel-defined flags: level 0x00000001 */
- if (c->cpuid_level >= 0x00000001) {
- __u32 misc;
- cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
- &c->x86_capability[0]);
- c->x86 = (tfms >> 8) & 0xf;
- c->x86_model = (tfms >> 4) & 0xf;
- c->x86_mask = tfms & 0xf;
- if (c->x86 == 0xf)
- c->x86 += (tfms >> 20) & 0xff;
- if (c->x86 >= 0x6)
- c->x86_model += ((tfms >> 16) & 0xF) << 4;
- if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
- c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
- } else {
- /* Have CPUID level 0 only - unheard of */
- c->x86 = 4;
- }
-
- c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
-#ifdef CONFIG_SMP
- c->phys_proc_id = c->initial_apicid;
-#endif
- /* AMD-defined flags: level 0x80000001 */
- xlvl = cpuid_eax(0x80000000);
- c->extended_cpuid_level = xlvl;
- if ((xlvl & 0xffff0000) == 0x80000000) {
- if (xlvl >= 0x80000001) {
- c->x86_capability[1] = cpuid_edx(0x80000001);
- c->x86_capability[6] = cpuid_ecx(0x80000001);
- }
- if (xlvl >= 0x80000004)
- get_model_name(c); /* Default name */
- }
-
- /* Transmeta-defined flags: level 0x80860001 */
- xlvl = cpuid_eax(0x80860000);
- if ((xlvl & 0xffff0000) == 0x80860000) {
- /* Don't set x86_cpuid_level here for now to not confuse. */
- if (xlvl >= 0x80860001)
- c->x86_capability[2] = cpuid_edx(0x80860001);
- }
-
- if (c->extended_cpuid_level >= 0x80000007)
- c->x86_power = cpuid_edx(0x80000007);
-
- if (c->extended_cpuid_level >= 0x80000008) {
- u32 eax = cpuid_eax(0x80000008);
-
- c->x86_virt_bits = (eax >> 8) & 0xff;
- c->x86_phys_bits = eax & 0xff;
- }
-
- detect_nopl(c);
-
- if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
- cpu_devs[c->x86_vendor]->c_early_init)
- cpu_devs[c->x86_vendor]->c_early_init(c);
-
- validate_pat_support(c);
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
-{
- int i;
-
- early_identify_cpu(c);
-
- init_scattered_cpuid_features(c);
-
- c->apicid = phys_pkg_id(0);
-
- /*
- * Vendor-specific initialization. In this section we
- * canonicalize the feature flags, meaning if there are
- * features a certain CPU supports which CPUID doesn't
- * tell us, CPUID claiming incorrect flags, or other bugs,
- * we handle them here.
- *
- * At the end of this section, c->x86_capability better
- * indicate the features this CPU genuinely supports!
- */
- if (this_cpu->c_init)
- this_cpu->c_init(c);
-
- detect_ht(c);
-
- /*
- * On SMP, boot_cpu_data holds the common feature set between
- * all CPUs; so make sure that we indicate which features are
- * common between the CPUs. The first time this routine gets
- * executed, c == &boot_cpu_data.
- */
- if (c != &boot_cpu_data) {
- /* AND the already accumulated flags with these */
- for (i = 0; i < NCAPINTS; i++)
- boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
- }
-
- /* Clear all flags overriden by options */
- for (i = 0; i < NCAPINTS; i++)
- c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
-#ifdef CONFIG_X86_MCE
- mcheck_init(c);
-#endif
- select_idle_routine(c);
-
-#ifdef CONFIG_NUMA
- numa_add_cpu(smp_processor_id());
-#endif
-
-}
-
-void __cpuinit identify_boot_cpu(void)
-{
- identify_cpu(&boot_cpu_data);
-}
-
-void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
-{
- BUG_ON(c == &boot_cpu_data);
- identify_cpu(c);
- mtrr_ap_init();
-}
-
-static __init int setup_noclflush(char *arg)
-{
- setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
- return 1;
-}
-__setup("noclflush", setup_noclflush);
-
-struct msr_range {
- unsigned min;
- unsigned max;
-};
-
-static struct msr_range msr_range_array[] __cpuinitdata = {
- { 0x00000000, 0x00000418},
- { 0xc0000000, 0xc000040b},
- { 0xc0010000, 0xc0010142},
- { 0xc0011000, 0xc001103b},
-};
-
-static void __cpuinit print_cpu_msr(void)
-{
- unsigned index;
- u64 val;
- int i;
- unsigned index_min, index_max;
-
- for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
- index_min = msr_range_array[i].min;
- index_max = msr_range_array[i].max;
- for (index = index_min; index < index_max; index++) {
- if (rdmsrl_amd_safe(index, &val))
- continue;
- printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
- }
- }
-}
-
-static int show_msr __cpuinitdata;
-static __init int setup_show_msr(char *arg)
-{
- int num;
-
- get_option(&arg, &num);
-
- if (num > 0)
- show_msr = num;
- return 1;
-}
-__setup("show_msr=", setup_show_msr);
-
-void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
-{
- if (c->x86_model_id[0])
- printk(KERN_CONT "%s", c->x86_model_id);
-
- if (c->x86_mask || c->cpuid_level >= 0)
- printk(KERN_CONT " stepping %02x\n", c->x86_mask);
- else
- printk(KERN_CONT "\n");
-
-#ifdef CONFIG_SMP
- if (c->cpu_index < show_msr)
- print_cpu_msr();
-#else
- if (show_msr)
- print_cpu_msr();
-#endif
-}
-
-static __init int setup_disablecpuid(char *arg)
-{
- int bit;
- if (get_option(&arg, &bit) && bit < NCAPINTS*32)
- setup_clear_cpu_cap(bit);
- else
- return 0;
- return 1;
-}
-__setup("clearcpuid=", setup_disablecpuid);
-
-cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-
-struct x8664_pda **_cpu_pda __read_mostly;
-EXPORT_SYMBOL(_cpu_pda);
-
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
-
-char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
-
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
-EXPORT_SYMBOL_GPL(__supported_pte_mask);
-
-static int do_not_nx __cpuinitdata;
-
-/* noexec=on|off
-Control non executable mappings for 64bit processes.
-
-on Enable(default)
-off Disable
-*/
-static int __init nonx_setup(char *str)
-{
- if (!str)
- return -EINVAL;
- if (!strncmp(str, "on", 2)) {
- __supported_pte_mask |= _PAGE_NX;
- do_not_nx = 0;
- } else if (!strncmp(str, "off", 3)) {
- do_not_nx = 1;
- __supported_pte_mask &= ~_PAGE_NX;
- }
- return 0;
-}
-early_param("noexec", nonx_setup);
-
-int force_personality32;
-
-/* noexec32=on|off
-Control non executable heap for 32bit processes.
-To control the stack too use noexec=off
-
-on PROT_READ does not imply PROT_EXEC for 32bit processes (default)
-off PROT_READ implies PROT_EXEC
-*/
-static int __init nonx32_setup(char *str)
-{
- if (!strcmp(str, "on"))
- force_personality32 &= ~READ_IMPLIES_EXEC;
- else if (!strcmp(str, "off"))
- force_personality32 |= READ_IMPLIES_EXEC;
- return 1;
-}
-__setup("noexec32=", nonx32_setup);
-
-void pda_init(int cpu)
-{
- struct x8664_pda *pda = cpu_pda(cpu);
-
- /* Setup up data that may be needed in __get_free_pages early */
- loadsegment(fs, 0);
- loadsegment(gs, 0);
- /* Memory clobbers used to order PDA accessed */
- mb();
- wrmsrl(MSR_GS_BASE, pda);
- mb();
-
- pda->cpunumber = cpu;
- pda->irqcount = -1;
- pda->kernelstack = (unsigned long)stack_thread_info() -
- PDA_STACKOFFSET + THREAD_SIZE;
- pda->active_mm = &init_mm;
- pda->mmu_state = 0;
-
- if (cpu == 0) {
- /* others are initialized in smpboot.c */
- pda->pcurrent = &init_task;
- pda->irqstackptr = boot_cpu_stack;
- pda->irqstackptr += IRQSTACKSIZE - 64;
- } else {
- if (!pda->irqstackptr) {
- pda->irqstackptr = (char *)
- __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
- if (!pda->irqstackptr)
- panic("cannot allocate irqstack for cpu %d",
- cpu);
- pda->irqstackptr += IRQSTACKSIZE - 64;
- }
-
- if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
- pda->nodenumber = cpu_to_node(cpu);
- }
-}
-
-char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
- DEBUG_STKSZ] __page_aligned_bss;
-
-extern asmlinkage void ignore_sysret(void);
-
-/* May not be marked __init: used by software suspend */
-void syscall_init(void)
-{
- /*
- * LSTAR and STAR live in a bit strange symbiosis.
- * They both write to the same internal register. STAR allows to
- * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
- */
- wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32);
- wrmsrl(MSR_LSTAR, system_call);
- wrmsrl(MSR_CSTAR, ignore_sysret);
-
-#ifdef CONFIG_IA32_EMULATION
- syscall32_cpu_init();
-#endif
-
- /* Flags to clear on syscall */
- wrmsrl(MSR_SYSCALL_MASK,
- X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
-}
-
-void __cpuinit check_efer(void)
-{
- unsigned long efer;
-
- rdmsrl(MSR_EFER, efer);
- if (!(efer & EFER_NX) || do_not_nx)
- __supported_pte_mask &= ~_PAGE_NX;
-}
-
-unsigned long kernel_eflags;
-
-/*
- * Copies of the original ist values from the tss are only accessed during
- * debugging, no special alignment required.
- */
-DEFINE_PER_CPU(struct orig_ist, orig_ist);
-
-/*
- * cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
- * A lot of state is already set up in PDA init.
- */
-void __cpuinit cpu_init(void)
-{
- int cpu = stack_smp_processor_id();
- struct tss_struct *t = &per_cpu(init_tss, cpu);
- struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
- unsigned long v;
- char *estacks = NULL;
- struct task_struct *me;
- int i;
-
- /* CPU 0 is initialised in head64.c */
- if (cpu != 0)
- pda_init(cpu);
- else
- estacks = boot_exception_stacks;
-
- me = current;
-
- if (cpu_test_and_set(cpu, cpu_initialized))
- panic("CPU#%d already initialized!\n", cpu);
-
- printk(KERN_INFO "Initializing CPU#%d\n", cpu);
-
- clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
- /*
- * Initialize the per-CPU GDT with the boot GDT,
- * and set up the GDT descriptor:
- */
-
- switch_to_new_gdt();
- load_idt((const struct desc_ptr *)&idt_descr);
-
- memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
- syscall_init();
-
- wrmsrl(MSR_FS_BASE, 0);
- wrmsrl(MSR_KERNEL_GS_BASE, 0);
- barrier();
-
- check_efer();
-
- /*
- * set up and load the per-CPU TSS
- */
- if (!orig_ist->ist[0]) {
- static const unsigned int order[N_EXCEPTION_STACKS] = {
- [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
- [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
- };
- for (v = 0; v < N_EXCEPTION_STACKS; v++) {
- if (cpu) {
- estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
- if (!estacks)
- panic("Cannot allocate exception "
- "stack %ld %d\n", v, cpu);
- }
- estacks += PAGE_SIZE << order[v];
- orig_ist->ist[v] = t->x86_tss.ist[v] =
- (unsigned long)estacks;
- }
- }
-
- t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
- /*
- * <= is required because the CPU will access up to
- * 8 bits beyond the end of the IO permission bitmap.
- */
- for (i = 0; i <= IO_BITMAP_LONGS; i++)
- t->io_bitmap[i] = ~0UL;
-
- atomic_inc(&init_mm.mm_count);
- me->active_mm = &init_mm;
- if (me->mm)
- BUG();
- enter_lazy_tlb(&init_mm, me);
-
- load_sp0(t, ¤t->thread);
- set_tss_desc(cpu, t);
- load_TR_desc();
- load_LDT(&init_mm.context);
-
-#ifdef CONFIG_KGDB
- /*
- * If the kgdb is connected no debug regs should be altered. This
- * is only applicable when KGDB and a KGDB I/O module are built
- * into the kernel and you are using early debugging with
- * kgdbwait. KGDB will control the kernel HW breakpoint registers.
- */
- if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
- arch_kgdb_ops.correct_hw_break();
- else {
-#endif
- /*
- * Clear all 6 debug registers:
- */
-
- set_debugreg(0UL, 0);
- set_debugreg(0UL, 1);
- set_debugreg(0UL, 2);
- set_debugreg(0UL, 3);
- set_debugreg(0UL, 6);
- set_debugreg(0UL, 7);
-#ifdef CONFIG_KGDB
- /* If the kgdb is connected no debug regs should be altered. */
- }
-#endif
-
- fpu_init();
-
- raw_local_save_flags(kernel_eflags);
-
- if (is_uv_system())
- uv_cpu_init();
-}
void (*c_init)(struct cpuinfo_x86 * c);
void (*c_identify)(struct cpuinfo_x86 * c);
unsigned int (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
+ int c_x86_vendor;
};
-extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+#define cpu_dev_register(cpu_devX) \
+ static struct cpu_dev *__cpu_dev_##cpu_devX __used \
+ __attribute__((__section__(".x86_cpu_dev.init"))) = \
+ &cpu_devX;
-struct cpu_vendor_dev {
- int vendor;
- struct cpu_dev *cpu_dev;
-};
-
-#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \
- static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \
- __attribute__((__section__(".x86cpuvendor.init"))) = \
- { cpu_vendor_id, cpu_dev }
-
-extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[];
+extern struct cpu_dev *__x86_cpu_dev_start[], *__x86_cpu_dev_end[];
-extern int get_model_name(struct cpuinfo_x86 *c);
extern void display_cacheinfo(struct cpuinfo_x86 *c);
#endif
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* Load/Store Serialize to mem access disable (=reorder it) */
- setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+ setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
/* set load/store serialize from 1GB to 4GB */
ccr3 |= 0xe0;
setCx86(CX86_CCR3, ccr3);
printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
/* CCR2 bit 2: unlock NW bit */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
/* set 'Not Write-through' */
write_cr0(read_cr0() | X86_CR0_NW);
/* CCR2 bit 2: lock NW bit and set WT1 */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
}
/*
local_irq_save(flags);
/* Suspend on halt power saving and enable #SUSP pin */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* FPU fast, DTE cache, Mem bypass */
- setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
set_cx86_memwb();
/* GXm supports extended cpuid levels 'ala' AMD */
if (c->cpuid_level == 2) {
/* Enable cxMMX extensions (GX1 Datasheet 54) */
- setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+ setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
/*
* GXm : 0x30 ... 0x5f GXm datasheet 51
*/
if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
geode_configure();
- get_model_name(c); /* get CPU marketing name */
return;
} else { /* MediaGX */
Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
if (dir1 > 7) {
dir0_msn++; /* M II */
/* Enable MMX extensions (App note 108) */
- setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+ setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
} else {
c->coma_bug = 1; /* 6x86MX, it has the bug. */
}
local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); /* enable cpuid */
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
local_irq_restore(flags);
}
.c_early_init = early_init_cyrix,
.c_init = init_cyrix,
.c_identify = cyrix_identify,
+ .c_x86_vendor = X86_VENDOR_CYRIX,
};
-cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev);
+cpu_dev_register(cyrix_cpu_dev);
static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
.c_vendor = "NSC",
.c_ident = { "Geode by NSC" },
.c_init = init_nsc,
+ .c_x86_vendor = X86_VENDOR_NSC,
};
-cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);
+cpu_dev_register(nsc_cpu_dev);
+++ /dev/null
-/*
- * Strings for the various x86 capability flags.
- *
- * This file must not contain any executable code.
- */
-
-#include <asm/cpufeature.h>
-
-/*
- * These flag bits must match the definitions in <asm/cpufeature.h>.
- * NULL means this bit is undefined or reserved; either way it doesn't
- * have meaning as far as Linux is concerned. Note that it's important
- * to realize there is a difference between this table and CPUID -- if
- * applications want to get the raw CPUID data, they should access
- * /dev/cpu/<cpu_nr>/cpuid instead.
- */
-const char * const x86_cap_flags[NCAPINTS*32] = {
- /* Intel-defined */
- "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
- "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
- "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
- "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
-
- /* AMD-defined */
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
- NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
- "3dnowext", "3dnow",
-
- /* Transmeta-defined */
- "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Other (Linux-defined) */
- "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
- NULL, NULL, NULL, NULL,
- "constant_tsc", "up", NULL, "arch_perfmon",
- "pebs", "bts", NULL, NULL,
- "rep_good", NULL, NULL, NULL,
- "nopl", NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Intel-defined (#2) */
- "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
- "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* VIA/Cyrix/Centaur-defined */
- NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
- "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic",
- "cr8_legacy", "abm", "sse4a", "misalignsse",
- "3dnowprefetch", "osvw", "ibs", "sse5",
- "skinit", "wdt", NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Auxiliary (Linux-defined) */
- "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-};
-
-const char *const x86_power_flags[32] = {
- "ts", /* temperature sensor */
- "fid", /* frequency id control */
- "vid", /* voltage id control */
- "ttp", /* thermal trip */
- "tm",
- "stc",
- "100mhzsteps",
- "hwpstate",
- "", /* tsc invariant mapped to constant_tsc */
- /* nothing */
-};
#include <asm/ds.h>
#include <asm/bugs.h>
+#ifdef CONFIG_X86_64
+#include <asm/topology.h>
+#include <asm/numa_64.h>
+#endif
+
#include "cpu.h"
#ifdef CONFIG_X86_LOCAL_APIC
#include <mach_apic.h>
#endif
-#ifdef CONFIG_X86_INTEL_USERCOPY
-/*
- * Alignment at which movsl is preferred for bulk memory copies.
- */
-struct movsl_mask movsl_mask __read_mostly;
-#endif
-
static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
{
- /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
- if (c->x86 == 15 && c->x86_cache_alignment == 64)
- c->x86_cache_alignment = 128;
if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
(c->x86 == 0x6 && c->x86_model >= 0x0e))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+#ifdef CONFIG_X86_64
+ set_cpu_cap(c, X86_FEATURE_SYSENTER32);
+#else
+ /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
+ if (c->x86 == 15 && c->x86_cache_alignment == 64)
+ c->x86_cache_alignment = 128;
+#endif
}
+#ifdef CONFIG_X86_32
/*
* Early probe support logic for ppro memory erratum #50
*
return 0;
}
+#ifdef CONFIG_X86_F00F_BUG
+static void __cpuinit trap_init_f00f_bug(void)
+{
+ __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
-/*
- * P4 Xeon errata 037 workaround.
- * Hardware prefetcher may cause stale data to be loaded into the cache.
- */
-static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
+ /*
+ * Update the IDT descriptor and reload the IDT so that
+ * it uses the read-only mapped virtual address.
+ */
+ idt_descr.address = fix_to_virt(FIX_F00F_IDT);
+ load_idt(&idt_descr);
+}
+#endif
+
+static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
{
unsigned long lo, hi;
+#ifdef CONFIG_X86_F00F_BUG
+ /*
+ * All current models of Pentium and Pentium with MMX technology CPUs
+ * have the F0 0F bug, which lets nonprivileged users lock up the system.
+ * Note that the workaround only should be initialized once...
+ */
+ c->f00f_bug = 0;
+ if (!paravirt_enabled() && c->x86 == 5) {
+ static int f00f_workaround_enabled;
+
+ c->f00f_bug = 1;
+ if (!f00f_workaround_enabled) {
+ trap_init_f00f_bug();
+ printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
+ f00f_workaround_enabled = 1;
+ }
+ }
+#endif
+
+ /*
+ * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until
+ * model 3 mask 3
+ */
+ if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+ clear_cpu_cap(c, X86_FEATURE_SEP);
+
+ /*
+ * P4 Xeon errata 037 workaround.
+ * Hardware prefetcher may cause stale data to be loaded into the cache.
+ */
if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
if ((lo & (1<<9)) == 0) {
wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
}
}
+
+ /*
+ * See if we have a good local APIC by checking for buggy Pentia,
+ * i.e. all B steppings and the C2 stepping of P54C when using their
+ * integrated APIC (see 11AP erratum in "Pentium Processor
+ * Specification Update").
+ */
+ if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
+ (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+ set_cpu_cap(c, X86_FEATURE_11AP);
+
+
+#ifdef CONFIG_X86_INTEL_USERCOPY
+ /*
+ * Set up the preferred alignment for movsl bulk memory moves
+ */
+ switch (c->x86) {
+ case 4: /* 486: untested */
+ break;
+ case 5: /* Old Pentia: untested */
+ break;
+ case 6: /* PII/PIII only like movsl with 8-byte alignment */
+ movsl_mask.mask = 7;
+ break;
+ case 15: /* P4 is OK down to 8-byte alignment */
+ movsl_mask.mask = 7;
+ break;
+ }
+#endif
+
+#ifdef CONFIG_X86_NUMAQ
+ numaq_tsc_disable();
+#endif
}
+#else
+static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
+{
+}
+#endif
+static void __cpuinit srat_detect_node(void)
+{
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
+ unsigned node;
+ int cpu = smp_processor_id();
+ int apicid = hard_smp_processor_id();
+
+ /* Don't do the funky fallback heuristics the AMD version employs
+ for now. */
+ node = apicid_to_node[apicid];
+ if (node == NUMA_NO_NODE || !node_online(node))
+ node = first_node(node_online_map);
+ numa_set_node(cpu, node);
+
+ printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+#endif
+}
/*
* find out the number of processor cores on the die
*/
-static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c)
+static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
{
unsigned int eax, ebx, ecx, edx;
return 1;
}
-#ifdef CONFIG_X86_F00F_BUG
-static void __cpuinit trap_init_f00f_bug(void)
+static void __cpuinit detect_vmx_virtcap(struct cpuinfo_x86 *c)
{
- __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
-
- /*
- * Update the IDT descriptor and reload the IDT so that
- * it uses the read-only mapped virtual address.
- */
- idt_descr.address = fix_to_virt(FIX_F00F_IDT);
- load_idt(&idt_descr);
+ /* Intel VMX MSR indicated features */
+#define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW 0x00200000
+#define X86_VMX_FEATURE_PROC_CTLS_VNMI 0x00400000
+#define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS 0x80000000
+#define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC 0x00000001
+#define X86_VMX_FEATURE_PROC_CTLS2_EPT 0x00000002
+#define X86_VMX_FEATURE_PROC_CTLS2_VPID 0x00000020
+
+ u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2;
+
+ clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
+ clear_cpu_cap(c, X86_FEATURE_VNMI);
+ clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
+ clear_cpu_cap(c, X86_FEATURE_EPT);
+ clear_cpu_cap(c, X86_FEATURE_VPID);
+
+ rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high);
+ msr_ctl = vmx_msr_high | vmx_msr_low;
+ if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)
+ set_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
+ if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI)
+ set_cpu_cap(c, X86_FEATURE_VNMI);
+ if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) {
+ rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2,
+ vmx_msr_low, vmx_msr_high);
+ msr_ctl2 = vmx_msr_high | vmx_msr_low;
+ if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) &&
+ (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW))
+ set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
+ if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT)
+ set_cpu_cap(c, X86_FEATURE_EPT);
+ if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID)
+ set_cpu_cap(c, X86_FEATURE_VPID);
+ }
}
-#endif
static void __cpuinit init_intel(struct cpuinfo_x86 *c)
{
unsigned int l2 = 0;
- char *p = NULL;
early_init_intel(c);
-#ifdef CONFIG_X86_F00F_BUG
- /*
- * All current models of Pentium and Pentium with MMX technology CPUs
- * have the F0 0F bug, which lets nonprivileged users lock up the system.
- * Note that the workaround only should be initialized once...
- */
- c->f00f_bug = 0;
- if (!paravirt_enabled() && c->x86 == 5) {
- static int f00f_workaround_enabled;
-
- c->f00f_bug = 1;
- if (!f00f_workaround_enabled) {
- trap_init_f00f_bug();
- printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
- f00f_workaround_enabled = 1;
- }
- }
-#endif
+ intel_workarounds(c);
l2 = init_intel_cacheinfo(c);
if (c->cpuid_level > 9) {
set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
}
- /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
- if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
- clear_cpu_cap(c, X86_FEATURE_SEP);
+ if (cpu_has_xmm2)
+ set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+ if (cpu_has_ds) {
+ unsigned int l1;
+ rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
+ if (!(l1 & (1<<11)))
+ set_cpu_cap(c, X86_FEATURE_BTS);
+ if (!(l1 & (1<<12)))
+ set_cpu_cap(c, X86_FEATURE_PEBS);
+ ds_init_intel(c);
+ }
+#ifdef CONFIG_X86_64
+ if (c->x86 == 15)
+ c->x86_cache_alignment = c->x86_clflush_size * 2;
+ if (c->x86 == 6)
+ set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+#else
/*
* Names for the Pentium II/Celeron processors
* detectable only by also checking the cache size.
* Dixon is NOT a Celeron.
*/
if (c->x86 == 6) {
+ char *p = NULL;
+
switch (c->x86_model) {
case 5:
if (c->x86_mask == 0) {
p = "Celeron (Coppermine)";
break;
}
- }
-
- if (p)
- strcpy(c->x86_model_id, p);
-
- c->x86_max_cores = num_cpu_cores(c);
-
- detect_ht(c);
- /* Work around errata */
- Intel_errata_workarounds(c);
-
-#ifdef CONFIG_X86_INTEL_USERCOPY
- /*
- * Set up the preferred alignment for movsl bulk memory moves
- */
- switch (c->x86) {
- case 4: /* 486: untested */
- break;
- case 5: /* Old Pentia: untested */
- break;
- case 6: /* PII/PIII only like movsl with 8-byte alignment */
- movsl_mask.mask = 7;
- break;
- case 15: /* P4 is OK down to 8-byte alignment */
- movsl_mask.mask = 7;
- break;
+ if (p)
+ strcpy(c->x86_model_id, p);
}
-#endif
- if (cpu_has_xmm2)
- set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
- if (c->x86 == 15) {
+ if (c->x86 == 15)
set_cpu_cap(c, X86_FEATURE_P4);
- }
if (c->x86 == 6)
set_cpu_cap(c, X86_FEATURE_P3);
- if (cpu_has_ds) {
- unsigned int l1;
- rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
- if (!(l1 & (1<<11)))
- set_cpu_cap(c, X86_FEATURE_BTS);
- if (!(l1 & (1<<12)))
- set_cpu_cap(c, X86_FEATURE_PEBS);
- ds_init_intel(c);
- }
if (cpu_has_bts)
ptrace_bts_init_intel(c);
- /*
- * See if we have a good local APIC by checking for buggy Pentia,
- * i.e. all B steppings and the C2 stepping of P54C when using their
- * integrated APIC (see 11AP erratum in "Pentium Processor
- * Specification Update").
- */
- if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
- (c->x86_mask < 0x6 || c->x86_mask == 0xb))
- set_cpu_cap(c, X86_FEATURE_11AP);
+#endif
-#ifdef CONFIG_X86_NUMAQ
- numaq_tsc_disable();
+ detect_extended_topology(c);
+ if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) {
+ /*
+ * let's use the legacy cpuid vector 0x1 and 0x4 for topology
+ * detection.
+ */
+ c->x86_max_cores = intel_num_cpu_cores(c);
+#ifdef CONFIG_X86_32
+ detect_ht(c);
#endif
+ }
+
+ /* Work around errata */
+ srat_detect_node();
+
+ if (cpu_has(c, X86_FEATURE_VMX))
+ detect_vmx_virtcap(c);
}
+#ifdef CONFIG_X86_32
static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
/*
size = 256;
return size;
}
+#endif
static struct cpu_dev intel_cpu_dev __cpuinitdata = {
.c_vendor = "Intel",
.c_ident = { "GenuineIntel" },
+#ifdef CONFIG_X86_32
.c_models = {
{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
{
}
},
},
+ .c_size_cache = intel_size_cache,
+#endif
.c_early_init = early_init_intel,
.c_init = init_intel,
- .c_size_cache = intel_size_cache,
+ .c_x86_vendor = X86_VENDOR_INTEL,
};
-cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
-
-#ifndef CONFIG_X86_CMPXCHG
-unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
-{
- u8 prev;
- unsigned long flags;
-
- /* Poor man's cmpxchg for 386. Unsuitable for SMP */
- local_irq_save(flags);
- prev = *(u8 *)ptr;
- if (prev == old)
- *(u8 *)ptr = new;
- local_irq_restore(flags);
- return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u8);
-
-unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
-{
- u16 prev;
- unsigned long flags;
-
- /* Poor man's cmpxchg for 386. Unsuitable for SMP */
- local_irq_save(flags);
- prev = *(u16 *)ptr;
- if (prev == old)
- *(u16 *)ptr = new;
- local_irq_restore(flags);
- return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u16);
-
-unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
-{
- u32 prev;
- unsigned long flags;
-
- /* Poor man's cmpxchg for 386. Unsuitable for SMP */
- local_irq_save(flags);
- prev = *(u32 *)ptr;
- if (prev == old)
- *(u32 *)ptr = new;
- local_irq_restore(flags);
- return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u32);
-#endif
-
-#ifndef CONFIG_X86_CMPXCHG64
-unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
-{
- u64 prev;
- unsigned long flags;
-
- /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
- local_irq_save(flags);
- prev = *(u64 *)ptr;
- if (prev == old)
- *(u64 *)ptr = new;
- local_irq_restore(flags);
- return prev;
-}
-EXPORT_SYMBOL(cmpxchg_486_u64);
-#endif
-
-/* arch_initcall(intel_cpu_init); */
+cpu_dev_register(intel_cpu_dev);
+++ /dev/null
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/processor.h>
-#include <asm/ptrace.h>
-#include <asm/topology.h>
-#include <asm/numa_64.h>
-
-#include "cpu.h"
-
-static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
-{
- if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
- (c->x86 == 0x6 && c->x86_model >= 0x0e))
- set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
- set_cpu_cap(c, X86_FEATURE_SYSENTER32);
-}
-
-/*
- * find out the number of processor cores on the die
- */
-static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
-{
- unsigned int eax, t;
-
- if (c->cpuid_level < 4)
- return 1;
-
- cpuid_count(4, 0, &eax, &t, &t, &t);
-
- if (eax & 0x1f)
- return ((eax >> 26) + 1);
- else
- return 1;
-}
-
-static void __cpuinit srat_detect_node(void)
-{
-#ifdef CONFIG_NUMA
- unsigned node;
- int cpu = smp_processor_id();
- int apicid = hard_smp_processor_id();
-
- /* Don't do the funky fallback heuristics the AMD version employs
- for now. */
- node = apicid_to_node[apicid];
- if (node == NUMA_NO_NODE || !node_online(node))
- node = first_node(node_online_map);
- numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-static void __cpuinit init_intel(struct cpuinfo_x86 *c)
-{
- init_intel_cacheinfo(c);
- if (c->cpuid_level > 9) {
- unsigned eax = cpuid_eax(10);
- /* Check for version and the number of counters */
- if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
- set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
- }
-
- if (cpu_has_ds) {
- unsigned int l1, l2;
- rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
- if (!(l1 & (1<<11)))
- set_cpu_cap(c, X86_FEATURE_BTS);
- if (!(l1 & (1<<12)))
- set_cpu_cap(c, X86_FEATURE_PEBS);
- }
-
-
- if (cpu_has_bts)
- ds_init_intel(c);
-
- if (c->x86 == 15)
- c->x86_cache_alignment = c->x86_clflush_size * 2;
- if (c->x86 == 6)
- set_cpu_cap(c, X86_FEATURE_REP_GOOD);
- set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
- c->x86_max_cores = intel_num_cpu_cores(c);
-
- srat_detect_node();
-}
-
-static struct cpu_dev intel_cpu_dev __cpuinitdata = {
- .c_vendor = "Intel",
- .c_ident = { "GenuineIntel" },
- .c_early_init = early_init_intel,
- .c_init = init_intel,
-};
-cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
-
/*
- * Routines to indentify caches on Intel CPU.
+ * Routines to indentify caches on Intel CPU.
*
- * Changes:
- * Venkatesh Pallipadi : Adding cache identification through cpuid(4)
+ * Changes:
+ * Venkatesh Pallipadi : Adding cache identification through cpuid(4)
* Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
* Andi Kleen / Andreas Herrmann : CPUID4 emulation on AMD.
*/
#include <linux/compiler.h>
#include <linux/cpu.h>
#include <linux/sched.h>
+#include <linux/pci.h>
#include <asm/processor.h>
#include <asm/smp.h>
union _cpuid4_leaf_ebx ebx;
union _cpuid4_leaf_ecx ecx;
unsigned long size;
+ unsigned long can_disable;
cpumask_t shared_cpu_map; /* future?: only cpus/node is needed */
};
+#ifdef CONFIG_PCI
+static struct pci_device_id k8_nb_id[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
+ {}
+};
+#endif
+
unsigned short num_cache_leaves;
/* AMD doesn't have CPUID4. Emulate it here to report the same
static unsigned char levels[] __cpuinitdata = { 1, 1, 2, 3 };
static unsigned char types[] __cpuinitdata = { 1, 2, 3, 3 };
-static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
- union _cpuid4_leaf_ebx *ebx,
- union _cpuid4_leaf_ecx *ecx)
+static void __cpuinit
+amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
+ union _cpuid4_leaf_ebx *ebx,
+ union _cpuid4_leaf_ecx *ecx)
{
unsigned dummy;
unsigned line_size, lines_per_tag, assoc, size_in_kb;
(ebx->split.ways_of_associativity + 1) - 1;
}
-static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+static void __cpuinit
+amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf)
+{
+ if (index < 3)
+ return;
+ this_leaf->can_disable = 1;
+}
+
+static int
+__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
{
union _cpuid4_leaf_eax eax;
union _cpuid4_leaf_ebx ebx;
union _cpuid4_leaf_ecx ecx;
unsigned edx;
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
amd_cpuid4(index, &eax, &ebx, &ecx);
- else
- cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
+ if (boot_cpu_data.x86 >= 0x10)
+ amd_check_l3_disable(index, this_leaf);
+ } else {
+ cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
+ }
+
if (eax.split.type == CACHE_TYPE_NULL)
return -EIO; /* better error ? */
this_leaf->eax = eax;
this_leaf->ebx = ebx;
this_leaf->ecx = ecx;
- this_leaf->size = (ecx.split.number_of_sets + 1) *
- (ebx.split.coherency_line_size + 1) *
- (ebx.split.physical_line_partition + 1) *
- (ebx.split.ways_of_associativity + 1);
+ this_leaf->size = (ecx.split.number_of_sets + 1) *
+ (ebx.split.coherency_line_size + 1) *
+ (ebx.split.physical_line_partition + 1) *
+ (ebx.split.ways_of_associativity + 1);
return 0;
}
/* pointer to _cpuid4_info array (for each cache leaf) */
static DEFINE_PER_CPU(struct _cpuid4_info *, cpuid4_info);
-#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y]))
+#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y]))
#ifdef CONFIG_SMP
static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
this_leaf = CPUID4_INFO_IDX(cpu, index);
for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
- sibling_leaf = CPUID4_INFO_IDX(sibling, index);
+ sibling_leaf = CPUID4_INFO_IDX(sibling, index);
cpu_clear(cpu, sibling_leaf->shared_cpu_map);
}
}
/* pointer to array of kobjects for cpuX/cache/indexY */
static DEFINE_PER_CPU(struct _index_kobject *, index_kobject);
-#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y]))
+#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y]))
#define show_one_plus(file_name, object, val) \
static ssize_t show_##file_name \
}
}
+#define to_object(k) container_of(k, struct _index_kobject, kobj)
+#define to_attr(a) container_of(a, struct _cache_attr, attr)
+
+#ifdef CONFIG_PCI
+static struct pci_dev *get_k8_northbridge(int node)
+{
+ struct pci_dev *dev = NULL;
+ int i;
+
+ for (i = 0; i <= node; i++) {
+ do {
+ dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+ if (!dev)
+ break;
+ } while (!pci_match_id(&k8_nb_id[0], dev));
+ if (!dev)
+ break;
+ }
+ return dev;
+}
+#else
+static struct pci_dev *get_k8_northbridge(int node)
+{
+ return NULL;
+}
+#endif
+
+static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf)
+{
+ int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+ struct pci_dev *dev = NULL;
+ ssize_t ret = 0;
+ int i;
+
+ if (!this_leaf->can_disable)
+ return sprintf(buf, "Feature not enabled\n");
+
+ dev = get_k8_northbridge(node);
+ if (!dev) {
+ printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 2; i++) {
+ unsigned int reg;
+
+ pci_read_config_dword(dev, 0x1BC + i * 4, ®);
+
+ ret += sprintf(buf, "%sEntry: %d\n", buf, i);
+ ret += sprintf(buf, "%sReads: %s\tNew Entries: %s\n",
+ buf,
+ reg & 0x80000000 ? "Disabled" : "Allowed",
+ reg & 0x40000000 ? "Disabled" : "Allowed");
+ ret += sprintf(buf, "%sSubCache: %x\tIndex: %x\n",
+ buf, (reg & 0x30000) >> 16, reg & 0xfff);
+ }
+ return ret;
+}
+
+static ssize_t
+store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf,
+ size_t count)
+{
+ int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+ struct pci_dev *dev = NULL;
+ unsigned int ret, index, val;
+
+ if (!this_leaf->can_disable)
+ return 0;
+
+ if (strlen(buf) > 15)
+ return -EINVAL;
+
+ ret = sscanf(buf, "%x %x", &index, &val);
+ if (ret != 2)
+ return -EINVAL;
+ if (index > 1)
+ return -EINVAL;
+
+ val |= 0xc0000000;
+ dev = get_k8_northbridge(node);
+ if (!dev) {
+ printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
+ return -EINVAL;
+ }
+
+ pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000);
+ wbinvd();
+ pci_write_config_dword(dev, 0x1BC + index * 4, val);
+
+ return 1;
+}
+
struct _cache_attr {
struct attribute attr;
ssize_t (*show)(struct _cpuid4_info *, char *);
define_one_ro(shared_cpu_map);
define_one_ro(shared_cpu_list);
+static struct _cache_attr cache_disable = __ATTR(cache_disable, 0644, show_cache_disable, store_cache_disable);
+
static struct attribute * default_attrs[] = {
&type.attr,
&level.attr,
&size.attr,
&shared_cpu_map.attr,
&shared_cpu_list.attr,
+ &cache_disable.attr,
NULL
};
-#define to_object(k) container_of(k, struct _index_kobject, kobj)
-#define to_attr(a) container_of(a, struct _cache_attr, attr)
-
static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
{
struct _cache_attr *fattr = to_attr(attr);
ret = fattr->show ?
fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
buf) :
- 0;
+ 0;
return ret;
}
static ssize_t store(struct kobject * kobj, struct attribute * attr,
const char * buf, size_t count)
{
- return 0;
+ struct _cache_attr *fattr = to_attr(attr);
+ struct _index_kobject *this_leaf = to_object(kobj);
+ ssize_t ret;
+
+ ret = fattr->store ?
+ fattr->store(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
+ buf, count) :
+ 0;
+ return ret;
}
static struct sysfs_ops sysfs_ops = {
return err;
}
-static void mce_remove_device(unsigned int cpu)
+static __cpuinit void mce_remove_device(unsigned int cpu)
{
int i;
--- /dev/null
+#!/usr/bin/perl
+#
+# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
+#
+
+($in, $out) = @ARGV;
+
+open(IN, "< $in\0") or die "$0: cannot open: $in: $!\n";
+open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n";
+
+print OUT "#include <asm/cpufeature.h>\n\n";
+print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
+
+while (defined($line = <IN>)) {
+ if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
+ $macro = $1;
+ $feature = $2;
+ $tail = $3;
+ if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
+ $feature = $1;
+ }
+
+ if ($feature ne '') {
+ printf OUT "\t%-32s = \"%s\",\n",
+ "[$macro]", "\L$feature";
+ }
+ }
+}
+print OUT "};\n";
+
+close(IN);
+close(OUT);
--- /dev/null
+/*
+ * Strings for the various x86 power flags
+ *
+ * This file must not contain any executable code.
+ */
+
+#include <asm/cpufeature.h>
+
+const char *const x86_power_flags[32] = {
+ "ts", /* temperature sensor */
+ "fid", /* frequency id control */
+ "vid", /* voltage id control */
+ "ttp", /* thermal trip */
+ "tm",
+ "stc",
+ "100mhzsteps",
+ "hwpstate",
+ "", /* tsc invariant mapped to constant_tsc */
+ /* nothing */
+};
#include <asm/msr.h>
#include "cpu.h"
+static void __cpuinit early_init_transmeta(struct cpuinfo_x86 *c)
+{
+ u32 xlvl;
+
+ /* Transmeta-defined flags: level 0x80860001 */
+ xlvl = cpuid_eax(0x80860000);
+ if ((xlvl & 0xffff0000) == 0x80860000) {
+ if (xlvl >= 0x80860001)
+ c->x86_capability[2] = cpuid_edx(0x80860001);
+ }
+}
+
static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
{
unsigned int cap_mask, uk, max, dummy;
unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev;
char cpu_info[65];
- get_model_name(c); /* Same as AMD/Cyrix */
+ early_init_transmeta(c);
+
display_cacheinfo(c);
/* Print CMS and CPU revision */
#endif
}
-static void __cpuinit transmeta_identify(struct cpuinfo_x86 *c)
-{
- u32 xlvl;
-
- /* Transmeta-defined flags: level 0x80860001 */
- xlvl = cpuid_eax(0x80860000);
- if ((xlvl & 0xffff0000) == 0x80860000) {
- if (xlvl >= 0x80860001)
- c->x86_capability[2] = cpuid_edx(0x80860001);
- }
-}
-
static struct cpu_dev transmeta_cpu_dev __cpuinitdata = {
.c_vendor = "Transmeta",
.c_ident = { "GenuineTMx86", "TransmetaCPU" },
+ .c_early_init = early_init_transmeta,
.c_init = init_transmeta,
- .c_identify = transmeta_identify,
+ .c_x86_vendor = X86_VENDOR_TRANSMETA,
};
-cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev);
+cpu_dev_register(transmeta_cpu_dev);
}
},
},
+ .c_x86_vendor = X86_VENDOR_UMC,
};
-cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev);
+cpu_dev_register(umc_cpu_dev);
case E820_NVS:
printk(KERN_CONT "(ACPI NVS)\n");
break;
+ case E820_UNUSABLE:
+ printk("(unusable)\n");
+ break;
default:
printk(KERN_CONT "type %u\n", e820.map[i].type);
break;
case E820_RAM: return "System RAM";
case E820_ACPI: return "ACPI Tables";
case E820_NVS: return "ACPI Non-volatile Storage";
+ case E820_UNUSABLE: return "Unusable memory";
default: return "reserved";
}
}
/*
* Mark e820 reserved areas as busy for the resource manager.
*/
+static struct resource __initdata *e820_res;
void __init e820_reserve_resources(void)
{
int i;
u64 end;
res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
+ e820_res = res;
for (i = 0; i < e820.nr_map; i++) {
end = e820.map[i].addr + e820.map[i].size - 1;
#ifndef CONFIG_RESOURCES_64BIT
res->end = end;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- insert_resource(&iomem_resource, res);
+
+ /*
+ * don't register the region that could be conflicted with
+ * pci device BAR resource and insert them later in
+ * pcibios_resource_survey()
+ */
+ if (e820.map[i].type != E820_RESERVED || res->start < (1ULL<<20))
+ insert_resource(&iomem_resource, res);
res++;
}
}
}
+void __init e820_reserve_resources_late(void)
+{
+ int i;
+ struct resource *res;
+
+ res = e820_res;
+ for (i = 0; i < e820.nr_map; i++) {
+ if (!res->parent && res->end)
+ reserve_region_with_split(&iomem_resource, res->start, res->end, res->name);
+ res++;
+ }
+}
+
char *__init default_machine_specific_memory_setup(void)
{
char *who = "BIOS-e820";
--- /dev/null
+/*
+ * Written by: Garry Forsgren, Unisys Corporation
+ * Natalie Protasevich, Unisys Corporation
+ * This file contains the code to configure and interface
+ * with Unisys ES7000 series hardware system manager.
+ *
+ * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Unisys Corporation, Township Line & Union Meeting
+ * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
+ *
+ * http://www.unisys.com
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <asm/io.h>
+#include <asm/nmi.h>
+#include <asm/smp.h>
+#include <asm/apicdef.h>
+#include <mach_mpparse.h>
+
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS 0
+#define ES7000_CLASSIC 1
+#define ES7000_ZORRO 2
+
+
+#define MIP_REG 1
+#define MIP_PSAI_REG 4
+
+#define MIP_BUSY 1
+#define MIP_SPIN 0xf0000
+#define MIP_VALID 0x0100000000000000ULL
+#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff)
+
+#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff)
+
+struct mip_reg_info {
+ unsigned long long mip_info;
+ unsigned long long delivery_info;
+ unsigned long long host_reg;
+ unsigned long long mip_reg;
+};
+
+struct part_info {
+ unsigned char type;
+ unsigned char length;
+ unsigned char part_id;
+ unsigned char apic_mode;
+ unsigned long snum;
+ char ptype[16];
+ char sname[64];
+ char pname[64];
+};
+
+struct psai {
+ unsigned long long entry_type;
+ unsigned long long addr;
+ unsigned long long bep_addr;
+};
+
+struct es7000_mem_info {
+ unsigned char type;
+ unsigned char length;
+ unsigned char resv[6];
+ unsigned long long start;
+ unsigned long long size;
+};
+
+struct es7000_oem_table {
+ unsigned long long hdr;
+ struct mip_reg_info mip;
+ struct part_info pif;
+ struct es7000_mem_info shm;
+ struct psai psai;
+};
+
+#ifdef CONFIG_ACPI
+
+struct oem_table {
+ struct acpi_table_header Header;
+ u32 OEMTableAddr;
+ u32 OEMTableSize;
+};
+
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+#endif
+
+struct mip_reg {
+ unsigned long long off_0;
+ unsigned long long off_8;
+ unsigned long long off_10;
+ unsigned long long off_18;
+ unsigned long long off_20;
+ unsigned long long off_28;
+ unsigned long long off_30;
+ unsigned long long off_38;
+};
+
+#define MIP_SW_APIC 0x1020b
+#define MIP_FUNC(VALUE) (VALUE & 0xff)
+
+/*
+ * ES7000 Globals
+ */
+
+static volatile unsigned long *psai = NULL;
+static struct mip_reg *mip_reg;
+static struct mip_reg *host_reg;
+static int mip_port;
+static unsigned long mip_addr, host_addr;
+
+int es7000_plat;
+
+/*
+ * GSI override for ES7000 platforms.
+ */
+
+static unsigned int base;
+
+static int
+es7000_rename_gsi(int ioapic, int gsi)
+{
+ if (es7000_plat == ES7000_ZORRO)
+ return gsi;
+
+ if (!base) {
+ int i;
+ for (i = 0; i < nr_ioapics; i++)
+ base += nr_ioapic_registers[i];
+ }
+
+ if (!ioapic && (gsi < 16))
+ gsi += base;
+ return gsi;
+}
+
+void __init
+setup_unisys(void)
+{
+ /*
+ * Determine the generation of the ES7000 currently running.
+ *
+ * es7000_plat = 1 if the machine is a 5xx ES7000 box
+ * es7000_plat = 2 if the machine is a x86_64 ES7000 box
+ *
+ */
+ if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
+ es7000_plat = ES7000_ZORRO;
+ else
+ es7000_plat = ES7000_CLASSIC;
+ ioapic_renumber_irq = es7000_rename_gsi;
+}
+
+/*
+ * Parse the OEM Table
+ */
+
+int __init
+parse_unisys_oem (char *oemptr)
+{
+ int i;
+ int success = 0;
+ unsigned char type, size;
+ unsigned long val;
+ char *tp = NULL;
+ struct psai *psaip = NULL;
+ struct mip_reg_info *mi;
+ struct mip_reg *host, *mip;
+
+ tp = oemptr;
+
+ tp += 8;
+
+ for (i=0; i <= 6; i++) {
+ type = *tp++;
+ size = *tp++;
+ tp -= 2;
+ switch (type) {
+ case MIP_REG:
+ mi = (struct mip_reg_info *)tp;
+ val = MIP_RD_LO(mi->host_reg);
+ host_addr = val;
+ host = (struct mip_reg *)val;
+ host_reg = __va(host);
+ val = MIP_RD_LO(mi->mip_reg);
+ mip_port = MIP_PORT(mi->mip_info);
+ mip_addr = val;
+ mip = (struct mip_reg *)val;
+ mip_reg = __va(mip);
+ pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+ (unsigned long)host_reg);
+ pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+ (unsigned long)mip_reg);
+ success++;
+ break;
+ case MIP_PSAI_REG:
+ psaip = (struct psai *)tp;
+ if (tp != NULL) {
+ if (psaip->addr)
+ psai = __va(psaip->addr);
+ else
+ psai = NULL;
+ success++;
+ }
+ break;
+ default:
+ break;
+ }
+ tp += size;
+ }
+
+ if (success < 2) {
+ es7000_plat = NON_UNISYS;
+ } else
+ setup_unisys();
+ return es7000_plat;
+}
+
+#ifdef CONFIG_ACPI
+int __init
+find_unisys_acpi_oem_table(unsigned long *oem_addr)
+{
+ struct acpi_table_header *header = NULL;
+ int i = 0;
+ while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
+ if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
+ struct oem_table *t = (struct oem_table *)header;
+ *oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
+ t->OEMTableSize);
+ return 0;
+ }
+ }
+ return -1;
+}
+#endif
+
+static void
+es7000_spin(int n)
+{
+ int i = 0;
+
+ while (i++ < n)
+ rep_nop();
+}
+
+static int __init
+es7000_mip_write(struct mip_reg *mip_reg)
+{
+ int status = 0;
+ int spin;
+
+ spin = MIP_SPIN;
+ while (((unsigned long long)host_reg->off_38 &
+ (unsigned long long)MIP_VALID) != 0) {
+ if (--spin <= 0) {
+ printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
+ return -1;
+ }
+ es7000_spin(MIP_SPIN);
+ }
+
+ memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
+ outb(1, mip_port);
+
+ spin = MIP_SPIN;
+
+ while (((unsigned long long)mip_reg->off_38 &
+ (unsigned long long)MIP_VALID) == 0) {
+ if (--spin <= 0) {
+ printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
+ return -1;
+ }
+ es7000_spin(MIP_SPIN);
+ }
+
+ status = ((unsigned long long)mip_reg->off_0 &
+ (unsigned long long)0xffff0000000000ULL) >> 48;
+ mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
+ (unsigned long long)~MIP_VALID);
+ return status;
+}
+
+int
+es7000_start_cpu(int cpu, unsigned long eip)
+{
+ unsigned long vect = 0, psaival = 0;
+
+ if (psai == NULL)
+ return -1;
+
+ vect = ((unsigned long)__pa(eip)/0x1000) << 16;
+ psaival = (0x1000000 | vect | cpu);
+
+ while (*psai & 0x1000000)
+ ;
+
+ *psai = psaival;
+
+ return 0;
+
+}
+
+void __init
+es7000_sw_apic(void)
+{
+ if (es7000_plat) {
+ int mip_status;
+ struct mip_reg es7000_mip_reg;
+
+ printk("ES7000: Enabling APIC mode.\n");
+ memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
+ es7000_mip_reg.off_0 = MIP_SW_APIC;
+ es7000_mip_reg.off_38 = (MIP_VALID);
+ while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
+ printk("es7000_sw_apic: command failed, status = %x\n",
+ mip_status);
+ return;
+ }
+}
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
+#include <linux/dmar.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-
-DEFINE_PER_CPU(int, x2apic_extra_bits);
+extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
+extern struct genapic apic_x2xpic_uv_x;
+extern struct genapic apic_x2apic_phys;
+extern struct genapic apic_x2apic_cluster;
struct genapic __read_mostly *genapic = &apic_flat;
-static enum uv_system_type uv_system_type;
+static struct genapic *apic_probe[] __initdata = {
+ &apic_x2apic_uv_x,
+ &apic_x2apic_phys,
+ &apic_x2apic_cluster,
+ &apic_physflat,
+ NULL,
+};
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
void __init setup_apic_routing(void)
{
- if (uv_system_type == UV_NON_UNIQUE_APIC)
- genapic = &apic_x2apic_uv_x;
- else
-#ifdef CONFIG_ACPI
- /*
- * Quirk: some x86_64 machines can only use physical APIC mode
- * regardless of how many processors are present (x86_64 ES7000
- * is an example).
- */
- if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
- (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
- genapic = &apic_physflat;
- else
-#endif
-
- if (max_physical_apicid < 8)
- genapic = &apic_flat;
- else
- genapic = &apic_physflat;
+ if (genapic == &apic_x2apic_phys || genapic == &apic_x2apic_cluster) {
+ if (!intr_remapping_enabled)
+ genapic = &apic_flat;
+ }
- printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+ if (genapic == &apic_flat) {
+ if (max_physical_apicid >= 8)
+ genapic = &apic_physflat;
+ printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
+ }
}
/* Same for both flat and physical. */
-void send_IPI_self(int vector)
+void apic_send_IPI_self(int vector)
{
__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
}
int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- if (!strcmp(oem_id, "SGI")) {
- if (!strcmp(oem_table_id, "UVL"))
- uv_system_type = UV_LEGACY_APIC;
- else if (!strcmp(oem_table_id, "UVX"))
- uv_system_type = UV_X2APIC;
- else if (!strcmp(oem_table_id, "UVH"))
- uv_system_type = UV_NON_UNIQUE_APIC;
+ int i;
+
+ for (i = 0; apic_probe[i]; ++i) {
+ if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
+ genapic = apic_probe[i];
+ printk(KERN_INFO "Setting APIC routing to %s.\n",
+ genapic->name);
+ return 1;
+ }
}
return 0;
}
-
-unsigned int read_apic_id(void)
-{
- unsigned int id;
-
- WARN_ON(preemptible() && num_online_cpus() > 1);
- id = apic_read(APIC_ID);
- if (uv_system_type >= UV_X2APIC)
- id |= __get_cpu_var(x2apic_extra_bits);
- return id;
-}
-
-enum uv_system_type get_uv_system_type(void)
-{
- return uv_system_type;
-}
-
-int is_uv_system(void)
-{
- return uv_system_type != UV_NONE;
-}
-EXPORT_SYMBOL_GPL(is_uv_system);
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
+#include <linux/hardirq.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
+#include <mach_apicdef.h>
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
+
+static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return 1;
+}
static cpumask_t flat_target_cpus(void)
{
__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
}
+static unsigned int get_apic_id(unsigned long x)
+{
+ unsigned int id;
+
+ id = (((x)>>24) & 0xFFu);
+ return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+ unsigned long x;
+
+ x = ((id & 0xFFu)<<24);
+ return x;
+}
+
+static unsigned int read_xapic_id(void)
+{
+ unsigned int id;
+
+ id = get_apic_id(apic_read(APIC_ID));
+ return id;
+}
+
static int flat_apic_id_registered(void)
{
- return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
+ return physid_isset(read_xapic_id(), phys_cpu_present_map);
}
static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
struct genapic apic_flat = {
.name = "flat",
+ .acpi_madt_oem_check = flat_acpi_madt_oem_check,
.int_delivery_mode = dest_LowestPrio,
.int_dest_mode = (APIC_DEST_LOGICAL != 0),
.target_cpus = flat_target_cpus,
.send_IPI_all = flat_send_IPI_all,
.send_IPI_allbutself = flat_send_IPI_allbutself,
.send_IPI_mask = flat_send_IPI_mask,
+ .send_IPI_self = apic_send_IPI_self,
.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id,
+ .get_apic_id = get_apic_id,
+ .set_apic_id = set_apic_id,
+ .apic_id_mask = (0xFFu<<24),
};
/*
* We cannot use logical delivery in this case because the mask
* overflows, so use physical mode.
*/
+static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+#ifdef CONFIG_ACPI
+ /*
+ * Quirk: some x86_64 machines can only use physical APIC mode
+ * regardless of how many processors are present (x86_64 ES7000
+ * is an example).
+ */
+ if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+ (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
+ return 1;
+#endif
+
+ return 0;
+}
static cpumask_t physflat_target_cpus(void)
{
struct genapic apic_physflat = {
.name = "physical flat",
+ .acpi_madt_oem_check = physflat_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = physflat_target_cpus,
.send_IPI_all = physflat_send_IPI_all,
.send_IPI_allbutself = physflat_send_IPI_allbutself,
.send_IPI_mask = physflat_send_IPI_mask,
+ .send_IPI_self = apic_send_IPI_self,
.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id,
+ .get_apic_id = get_apic_id,
+ .set_apic_id = set_apic_id,
+ .apic_id_mask = (0xFFu<<24),
};
--- /dev/null
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+
+DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
+
+static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (cpu_has_x2apic)
+ return 1;
+
+ return 0;
+}
+
+/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
+
+static cpumask_t x2apic_target_cpus(void)
+{
+ return cpumask_of_cpu(0);
+}
+
+/*
+ * for now each logical cpu is in its own vector allocation domain.
+ */
+static cpumask_t x2apic_vector_allocation_domain(int cpu)
+{
+ cpumask_t domain = CPU_MASK_NONE;
+ cpu_set(cpu, domain);
+ return domain;
+}
+
+static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
+ unsigned int dest)
+{
+ unsigned long cfg;
+
+ cfg = __prepare_ICR(0, vector, dest);
+
+ /*
+ * send the IPI.
+ */
+ x2apic_icr_write(cfg, apicid);
+}
+
+/*
+ * for now, we send the IPI's one by one in the cpumask.
+ * TBD: Based on the cpu mask, we can send the IPI's to the cluster group
+ * at once. We have 16 cpu's in a cluster. This will minimize IPI register
+ * writes.
+ */
+static void x2apic_send_IPI_mask(cpumask_t mask, int vector)
+{
+ unsigned long flags;
+ unsigned long query_cpu;
+
+ local_irq_save(flags);
+ for_each_cpu_mask(query_cpu, mask) {
+ __x2apic_send_IPI_dest(per_cpu(x86_cpu_to_logical_apicid, query_cpu),
+ vector, APIC_DEST_LOGICAL);
+ }
+ local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+
+ cpu_clear(smp_processor_id(), mask);
+
+ if (!cpus_empty(mask))
+ x2apic_send_IPI_mask(mask, vector);
+}
+
+static void x2apic_send_IPI_all(int vector)
+{
+ x2apic_send_IPI_mask(cpu_online_map, vector);
+}
+
+static int x2apic_apic_id_registered(void)
+{
+ return 1;
+}
+
+static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int cpu;
+
+ /*
+ * We're using fixed IRQ delivery, can only return one phys APIC ID.
+ * May as well be the first.
+ */
+ cpu = first_cpu(cpumask);
+ if ((unsigned)cpu < NR_CPUS)
+ return per_cpu(x86_cpu_to_logical_apicid, cpu);
+ else
+ return BAD_APICID;
+}
+
+static unsigned int get_apic_id(unsigned long x)
+{
+ unsigned int id;
+
+ id = x;
+ return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+ unsigned long x;
+
+ x = id;
+ return x;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+ return current_cpu_data.initial_apicid >> index_msb;
+}
+
+static void x2apic_send_IPI_self(int vector)
+{
+ apic_write(APIC_SELF_IPI, vector);
+}
+
+static void init_x2apic_ldr(void)
+{
+ int cpu = smp_processor_id();
+
+ per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR);
+ return;
+}
+
+struct genapic apic_x2apic_cluster = {
+ .name = "cluster x2apic",
+ .acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
+ .int_delivery_mode = dest_LowestPrio,
+ .int_dest_mode = (APIC_DEST_LOGICAL != 0),
+ .target_cpus = x2apic_target_cpus,
+ .vector_allocation_domain = x2apic_vector_allocation_domain,
+ .apic_id_registered = x2apic_apic_id_registered,
+ .init_apic_ldr = init_x2apic_ldr,
+ .send_IPI_all = x2apic_send_IPI_all,
+ .send_IPI_allbutself = x2apic_send_IPI_allbutself,
+ .send_IPI_mask = x2apic_send_IPI_mask,
+ .send_IPI_self = x2apic_send_IPI_self,
+ .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
+ .phys_pkg_id = phys_pkg_id,
+ .get_apic_id = get_apic_id,
+ .set_apic_id = set_apic_id,
+ .apic_id_mask = (0xFFFFFFFFu),
+};
--- /dev/null
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+
+static int x2apic_phys;
+
+static int set_x2apic_phys_mode(char *arg)
+{
+ x2apic_phys = 1;
+ return 0;
+}
+early_param("x2apic_phys", set_x2apic_phys_mode);
+
+static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (cpu_has_x2apic && x2apic_phys)
+ return 1;
+
+ return 0;
+}
+
+/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
+
+static cpumask_t x2apic_target_cpus(void)
+{
+ return cpumask_of_cpu(0);
+}
+
+static cpumask_t x2apic_vector_allocation_domain(int cpu)
+{
+ cpumask_t domain = CPU_MASK_NONE;
+ cpu_set(cpu, domain);
+ return domain;
+}
+
+static void __x2apic_send_IPI_dest(unsigned int apicid, int vector,
+ unsigned int dest)
+{
+ unsigned long cfg;
+
+ cfg = __prepare_ICR(0, vector, dest);
+
+ /*
+ * send the IPI.
+ */
+ x2apic_icr_write(cfg, apicid);
+}
+
+static void x2apic_send_IPI_mask(cpumask_t mask, int vector)
+{
+ unsigned long flags;
+ unsigned long query_cpu;
+
+ local_irq_save(flags);
+ for_each_cpu_mask(query_cpu, mask) {
+ __x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu),
+ vector, APIC_DEST_PHYSICAL);
+ }
+ local_irq_restore(flags);
+}
+
+static void x2apic_send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+
+ cpu_clear(smp_processor_id(), mask);
+
+ if (!cpus_empty(mask))
+ x2apic_send_IPI_mask(mask, vector);
+}
+
+static void x2apic_send_IPI_all(int vector)
+{
+ x2apic_send_IPI_mask(cpu_online_map, vector);
+}
+
+static int x2apic_apic_id_registered(void)
+{
+ return 1;
+}
+
+static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int cpu;
+
+ /*
+ * We're using fixed IRQ delivery, can only return one phys APIC ID.
+ * May as well be the first.
+ */
+ cpu = first_cpu(cpumask);
+ if ((unsigned)cpu < NR_CPUS)
+ return per_cpu(x86_cpu_to_apicid, cpu);
+ else
+ return BAD_APICID;
+}
+
+static unsigned int get_apic_id(unsigned long x)
+{
+ unsigned int id;
+
+ id = x;
+ return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+ unsigned long x;
+
+ x = id;
+ return x;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+ return current_cpu_data.initial_apicid >> index_msb;
+}
+
+void x2apic_send_IPI_self(int vector)
+{
+ apic_write(APIC_SELF_IPI, vector);
+}
+
+void init_x2apic_ldr(void)
+{
+ return;
+}
+
+struct genapic apic_x2apic_phys = {
+ .name = "physical x2apic",
+ .acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
+ .int_delivery_mode = dest_Fixed,
+ .int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+ .target_cpus = x2apic_target_cpus,
+ .vector_allocation_domain = x2apic_vector_allocation_domain,
+ .apic_id_registered = x2apic_apic_id_registered,
+ .init_apic_ldr = init_x2apic_ldr,
+ .send_IPI_all = x2apic_send_IPI_all,
+ .send_IPI_allbutself = x2apic_send_IPI_allbutself,
+ .send_IPI_mask = x2apic_send_IPI_mask,
+ .send_IPI_self = x2apic_send_IPI_self,
+ .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid,
+ .phys_pkg_id = phys_pkg_id,
+ .get_apic_id = get_apic_id,
+ .set_apic_id = set_apic_id,
+ .apic_id_mask = (0xFFFFFFFFu),
+};
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
-#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <linux/module.h>
+#include <linux/hardirq.h>
#include <asm/smp.h>
#include <asm/ipi.h>
#include <asm/genapic.h>
#include <asm/uv/uv_hub.h>
#include <asm/uv/bios.h>
+DEFINE_PER_CPU(int, x2apic_extra_bits);
+
+static enum uv_system_type uv_system_type;
+
+static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (!strcmp(oem_id, "SGI")) {
+ if (!strcmp(oem_table_id, "UVL"))
+ uv_system_type = UV_LEGACY_APIC;
+ else if (!strcmp(oem_table_id, "UVX"))
+ uv_system_type = UV_X2APIC;
+ else if (!strcmp(oem_table_id, "UVH")) {
+ uv_system_type = UV_NON_UNIQUE_APIC;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+enum uv_system_type get_uv_system_type(void)
+{
+ return uv_system_type;
+}
+
+int is_uv_system(void)
+{
+ return uv_system_type != UV_NONE;
+}
+EXPORT_SYMBOL_GPL(is_uv_system);
+
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
return 1;
}
+static void uv_init_apic_ldr(void)
+{
+}
+
static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
{
int cpu;
return BAD_APICID;
}
+static unsigned int get_apic_id(unsigned long x)
+{
+ unsigned int id;
+
+ WARN_ON(preemptible() && num_online_cpus() > 1);
+ id = x | __get_cpu_var(x2apic_extra_bits);
+
+ return id;
+}
+
+static unsigned long set_apic_id(unsigned int id)
+{
+ unsigned long x;
+
+ /* maskout x2apic_extra_bits ? */
+ x = id;
+ return x;
+}
+
+static unsigned int uv_read_apic_id(void)
+{
+
+ return get_apic_id(apic_read(APIC_ID));
+}
+
static unsigned int phys_pkg_id(int index_msb)
{
- return GET_APIC_ID(read_apic_id()) >> index_msb;
+ return uv_read_apic_id() >> index_msb;
}
#ifdef ZZZ /* Needs x2apic patch */
struct genapic apic_x2apic_uv_x = {
.name = "UV large system",
+ .acpi_madt_oem_check = uv_acpi_madt_oem_check,
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
.target_cpus = uv_target_cpus,
.vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */
.apic_id_registered = uv_apic_id_registered,
+ .init_apic_ldr = uv_init_apic_ldr,
.send_IPI_all = uv_send_IPI_all,
.send_IPI_allbutself = uv_send_IPI_allbutself,
.send_IPI_mask = uv_send_IPI_mask,
/* ZZZ.send_IPI_self = uv_send_IPI_self, */
.cpu_mask_to_apicid = uv_cpu_mask_to_apicid,
.phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */
+ .get_apic_id = get_apic_id,
+ .set_apic_id = set_apic_id,
+ .apic_id_mask = (0xFFFFFFFFu),
};
static __cpuinit void set_x2apic_extra_bits(int pnode)
if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
set_x2apic_extra_bits(uv_hub_info->pnode);
}
+
+
# include <asm/sigcontext32.h>
# include <asm/user32.h>
#else
-# define save_i387_ia32 save_i387
-# define restore_i387_ia32 restore_i387
+# define save_i387_xstate_ia32 save_i387_xstate
+# define restore_i387_xstate_ia32 restore_i387_xstate
# define _fpstate_ia32 _fpstate
+# define _xstate_ia32 _xstate
+# define sig_xstate_ia32_size sig_xstate_size
+# define fx_sw_reserved_ia32 fx_sw_reserved
# define user_i387_ia32_struct user_i387_struct
# define user32_fxsr_struct user_fxsr_struct
#endif
static unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
unsigned int xstate_size;
+unsigned int sig_xstate_ia32_size = sizeof(struct _fpstate_ia32);
static struct i387_fxsave_struct fx_scratch __cpuinitdata;
void __cpuinit mxcsr_feature_mask_init(void)
return;
}
+ if (cpu_has_xsave) {
+ xsave_cntxt_init();
+ return;
+ }
+
if (cpu_has_fxsr)
xstate_size = sizeof(struct i387_fxsave_struct);
#ifdef CONFIG_X86_32
write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */
+ /*
+ * Boot processor to setup the FP and extended state context info.
+ */
+ if (!smp_processor_id())
+ init_thread_xstate();
+ xsave_init();
+
mxcsr_feature_mask_init();
/* clean state in init */
- current_thread_info()->status = 0;
+ if (cpu_has_xsave)
+ current_thread_info()->status = TS_XSAVE;
+ else
+ current_thread_info()->status = 0;
clear_used_math();
}
#endif /* CONFIG_X86_64 */
*/
target->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
+ /*
+ * update the header bits in the xsave header, indicating the
+ * presence of FP and SSE state.
+ */
+ if (cpu_has_xsave)
+ target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+
return ret;
}
if (!ret)
convert_to_fxsr(target, &env);
+ /*
+ * update the header bit in the xsave header, indicating the
+ * presence of FP.
+ */
+ if (cpu_has_xsave)
+ target->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FP;
return ret;
}
struct task_struct *tsk = current;
struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave;
- unlazy_fpu(tsk);
fp->status = fp->swd;
if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct)))
return -1;
struct user_i387_ia32_struct env;
int err = 0;
- unlazy_fpu(tsk);
-
convert_from_fxsr(&env, tsk);
if (__copy_to_user(buf, &env, sizeof(env)))
return -1;
if (err)
return -1;
- if (__copy_to_user(&buf->_fxsr_env[0], fx,
- sizeof(struct i387_fxsave_struct)))
+ if (__copy_to_user(&buf->_fxsr_env[0], fx, xstate_size))
return -1;
return 1;
}
-int save_i387_ia32(struct _fpstate_ia32 __user *buf)
+static int save_i387_xsave(void __user *buf)
+{
+ struct _fpstate_ia32 __user *fx = buf;
+ int err = 0;
+
+ if (save_i387_fxsave(fx) < 0)
+ return -1;
+
+ err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved_ia32,
+ sizeof(struct _fpx_sw_bytes));
+ err |= __put_user(FP_XSTATE_MAGIC2,
+ (__u32 __user *) (buf + sig_xstate_ia32_size
+ - FP_XSTATE_MAGIC2_SIZE));
+ if (err)
+ return -1;
+
+ return 1;
+}
+
+int save_i387_xstate_ia32(void __user *buf)
{
+ struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
+ struct task_struct *tsk = current;
+
if (!used_math())
return 0;
+
+ if (!access_ok(VERIFY_WRITE, buf, sig_xstate_ia32_size))
+ return -EACCES;
/*
* This will cause a "finit" to be triggered by the next
* attempted FPU operation by the 'current' process.
if (!HAVE_HWFP) {
return fpregs_soft_get(current, NULL,
0, sizeof(struct user_i387_ia32_struct),
- NULL, buf) ? -1 : 1;
+ NULL, fp) ? -1 : 1;
}
+ unlazy_fpu(tsk);
+
+ if (cpu_has_xsave)
+ return save_i387_xsave(fp);
if (cpu_has_fxsr)
- return save_i387_fxsave(buf);
+ return save_i387_fxsave(fp);
else
- return save_i387_fsave(buf);
+ return save_i387_fsave(fp);
}
static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
sizeof(struct i387_fsave_struct));
}
-static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf)
+static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf,
+ unsigned int size)
{
struct task_struct *tsk = current;
struct user_i387_ia32_struct env;
int err;
err = __copy_from_user(&tsk->thread.xstate->fxsave, &buf->_fxsr_env[0],
- sizeof(struct i387_fxsave_struct));
+ size);
/* mxcsr reserved bits must be masked to zero for security reasons */
tsk->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
if (err || __copy_from_user(&env, buf, sizeof(env)))
return 0;
}
-int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
+static int restore_i387_xsave(void __user *buf)
+{
+ struct _fpx_sw_bytes fx_sw_user;
+ struct _fpstate_ia32 __user *fx_user =
+ ((struct _fpstate_ia32 __user *) buf);
+ struct i387_fxsave_struct __user *fx =
+ (struct i387_fxsave_struct __user *) &fx_user->_fxsr_env[0];
+ struct xsave_hdr_struct *xsave_hdr =
+ ¤t->thread.xstate->xsave.xsave_hdr;
+ u64 mask;
+ int err;
+
+ if (check_for_xstate(fx, buf, &fx_sw_user))
+ goto fx_only;
+
+ mask = fx_sw_user.xstate_bv;
+
+ err = restore_i387_fxsave(buf, fx_sw_user.xstate_size);
+
+ xsave_hdr->xstate_bv &= pcntxt_mask;
+ /*
+ * These bits must be zero.
+ */
+ xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
+
+ /*
+ * Init the state that is not present in the memory layout
+ * and enabled by the OS.
+ */
+ mask = ~(pcntxt_mask & ~mask);
+ xsave_hdr->xstate_bv &= mask;
+
+ return err;
+fx_only:
+ /*
+ * Couldn't find the extended state information in the memory
+ * layout. Restore the FP/SSE and init the other extended state
+ * enabled by the OS.
+ */
+ xsave_hdr->xstate_bv = XSTATE_FPSSE;
+ return restore_i387_fxsave(buf, sizeof(struct i387_fxsave_struct));
+}
+
+int restore_i387_xstate_ia32(void __user *buf)
{
int err;
struct task_struct *tsk = current;
+ struct _fpstate_ia32 __user *fp = (struct _fpstate_ia32 __user *) buf;
if (HAVE_HWFP)
clear_fpu(tsk);
+ if (!buf) {
+ if (used_math()) {
+ clear_fpu(tsk);
+ clear_used_math();
+ }
+
+ return 0;
+ } else
+ if (!access_ok(VERIFY_READ, buf, sig_xstate_ia32_size))
+ return -EACCES;
+
if (!used_math()) {
err = init_fpu(tsk);
if (err)
}
if (HAVE_HWFP) {
- if (cpu_has_fxsr)
- err = restore_i387_fxsave(buf);
+ if (cpu_has_xsave)
+ err = restore_i387_xsave(buf);
+ else if (cpu_has_fxsr)
+ err = restore_i387_fxsave(fp, sizeof(struct
+ i387_fxsave_struct));
else
- err = restore_i387_fsave(buf);
+ err = restore_i387_fsave(fp);
} else {
err = fpregs_soft_set(current, NULL,
0, sizeof(struct user_i387_ia32_struct),
- NULL, buf) != 0;
+ NULL, fp) != 0;
}
set_used_math();
device_initcall(i8259A_init_sysfs);
+void mask_8259A(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+
+ outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
+ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
+
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
+void unmask_8259A(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8259A_lock, flags);
+
+ outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
+ outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
+
+ spin_unlock_irqrestore(&i8259A_lock, flags);
+}
+
void init_8259A(int auto_eoi)
{
unsigned long flags;
#include <asm/nmi.h>
#include <asm/msidef.h>
#include <asm/hypertransport.h>
+#include <asm/setup.h>
#include <mach_apic.h>
#include <mach_apicdef.h>
+#define __apicdebuginit(type) static type __init
+
int (*ioapic_renumber_irq)(int ioapic, int irq);
atomic_t irq_mis_count;
ioapic_write_entry(apic, pin, entry);
}
-void __init print_IO_APIC(void)
+
+__apicdebuginit(void) print_IO_APIC(void)
{
int apic, i;
union IO_APIC_reg_00 reg_00;
return;
}
-#if 0
-
-static void print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_bitfield(int base)
{
unsigned int v;
int i, j;
}
}
-void /*__init*/ print_local_APIC(void *dummy)
+__apicdebuginit(void) print_local_APIC(void *dummy)
{
unsigned int v, ver, maxlvt;
+ u64 icr;
if (apic_verbosity == APIC_QUIET)
return;
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v,
- GET_APIC_ID(read_apic_id()));
+ GET_APIC_ID(v));
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
}
- v = apic_read(APIC_ICR);
- printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
- v = apic_read(APIC_ICR2);
- printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
+ icr = apic_icr_read();
+ printk(KERN_DEBUG "... APIC ICR: %08x\n", icr);
+ printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32);
v = apic_read(APIC_LVTT);
printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
printk("\n");
}
-void print_all_local_APICs(void)
+__apicdebuginit(void) print_all_local_APICs(void)
{
on_each_cpu(print_local_APIC, NULL, 1);
}
-void /*__init*/ print_PIC(void)
+__apicdebuginit(void) print_PIC(void)
{
unsigned int v;
unsigned long flags;
printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
}
-#endif /* 0 */
+__apicdebuginit(int) print_all_ICs(void)
+{
+ print_PIC();
+ print_all_local_APICs();
+ print_IO_APIC();
+
+ return 0;
+}
+
+fs_initcall(print_all_ICs);
+
static void __init enable_IO_APIC(void)
{
entry.dest_mode = 0; /* Physical */
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
- entry.dest.physical.physical_dest =
- GET_APIC_ID(read_apic_id());
+ entry.dest.physical.physical_dest = read_apic_id();
/*
* Add it to the IO-APIC irq-routing table:
unsigned char old_id;
unsigned long flags;
-#ifdef CONFIG_X86_NUMAQ
- if (found_numaq)
+ if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
return;
-#endif
/*
* Don't check I/O APIC IDs for xAPIC systems. They have
setup_IO_APIC_irqs();
init_IO_APIC_traps();
check_timer();
- if (!acpi_ioapic)
- print_IO_APIC();
}
/*
#include <acpi/acpi_bus.h>
#endif
#include <linux/bootmem.h>
+#include <linux/dmar.h>
#include <asm/idle.h>
#include <asm/io.h>
#include <asm/nmi.h>
#include <asm/msidef.h>
#include <asm/hypertransport.h>
+#include <asm/irq_remapping.h>
#include <mach_ipi.h>
#include <mach_apic.h>
+#define __apicdebuginit(type) static type __init
+
struct irq_cfg {
cpumask_t domain;
cpumask_t old_domain;
char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
-#define __apicdebuginit __init
-
int sis_apic_bug; /* not actually supported, dummy for compile */
static int no_timer_check;
*/
int nr_ioapic_registers[MAX_IO_APICS];
+/* I/O APIC RTE contents at the OS boot up */
+struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS];
+
/* I/O APIC entries */
struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
pin = entry->pin;
if (pin == -1)
break;
- io_apic_write(apic, 0x11 + pin*2, dest);
+ /*
+ * With interrupt-remapping, destination information comes
+ * from interrupt-remapping table entry.
+ */
+ if (!irq_remapped(irq))
+ io_apic_write(apic, 0x11 + pin*2, dest);
reg = io_apic_read(apic, 0x10 + pin*2);
reg &= ~IO_APIC_REDIR_VECTOR_MASK;
reg |= vector;
clear_IO_APIC_pin(apic, pin);
}
+/*
+ * Saves and masks all the unmasked IO-APIC RTE's
+ */
+int save_mask_IO_APIC_setup(void)
+{
+ union IO_APIC_reg_01 reg_01;
+ unsigned long flags;
+ int apic, pin;
+
+ /*
+ * The number of IO-APIC IRQ registers (== #pins):
+ */
+ for (apic = 0; apic < nr_ioapics; apic++) {
+ spin_lock_irqsave(&ioapic_lock, flags);
+ reg_01.raw = io_apic_read(apic, 1);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+ }
+
+ for (apic = 0; apic < nr_ioapics; apic++) {
+ early_ioapic_entries[apic] =
+ kzalloc(sizeof(struct IO_APIC_route_entry) *
+ nr_ioapic_registers[apic], GFP_KERNEL);
+ if (!early_ioapic_entries[apic])
+ return -ENOMEM;
+ }
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+ struct IO_APIC_route_entry entry;
+
+ entry = early_ioapic_entries[apic][pin] =
+ ioapic_read_entry(apic, pin);
+ if (!entry.mask) {
+ entry.mask = 1;
+ ioapic_write_entry(apic, pin, entry);
+ }
+ }
+ return 0;
+}
+
+void restore_IO_APIC_setup(void)
+{
+ int apic, pin;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
+ ioapic_write_entry(apic, pin,
+ early_ioapic_entries[apic][pin]);
+}
+
+void reinit_intr_remapped_IO_APIC(int intr_remapping)
+{
+ /*
+ * for now plain restore of previous settings.
+ * TBD: In the case of OS enabling interrupt-remapping,
+ * IO-APIC RTE's need to be setup to point to interrupt-remapping
+ * table entries. for now, do a plain restore, and wait for
+ * the setup_IO_APIC_irqs() to do proper initialization.
+ */
+ restore_IO_APIC_setup();
+}
+
int skip_ioapic_setup;
int ioapic_force;
}
static struct irq_chip ioapic_chip;
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip;
+#endif
static void ioapic_register_intr(int irq, unsigned long trigger)
{
- if (trigger) {
+ if (trigger)
irq_desc[irq].status |= IRQ_LEVEL;
- set_irq_chip_and_handler_name(irq, &ioapic_chip,
- handle_fasteoi_irq, "fasteoi");
- } else {
+ else
irq_desc[irq].status &= ~IRQ_LEVEL;
+
+#ifdef CONFIG_INTR_REMAP
+ if (irq_remapped(irq)) {
+ irq_desc[irq].status |= IRQ_MOVE_PCNTXT;
+ if (trigger)
+ set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+ handle_fasteoi_irq,
+ "fasteoi");
+ else
+ set_irq_chip_and_handler_name(irq, &ir_ioapic_chip,
+ handle_edge_irq, "edge");
+ return;
+ }
+#endif
+ if (trigger)
+ set_irq_chip_and_handler_name(irq, &ioapic_chip,
+ handle_fasteoi_irq,
+ "fasteoi");
+ else
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_edge_irq, "edge");
+}
+
+static int setup_ioapic_entry(int apic, int irq,
+ struct IO_APIC_route_entry *entry,
+ unsigned int destination, int trigger,
+ int polarity, int vector)
+{
+ /*
+ * add it to the IO-APIC irq-routing table:
+ */
+ memset(entry,0,sizeof(*entry));
+
+#ifdef CONFIG_INTR_REMAP
+ if (intr_remapping_enabled) {
+ struct intel_iommu *iommu = map_ioapic_to_ir(apic);
+ struct irte irte;
+ struct IR_IO_APIC_route_entry *ir_entry =
+ (struct IR_IO_APIC_route_entry *) entry;
+ int index;
+
+ if (!iommu)
+ panic("No mapping iommu for ioapic %d\n", apic);
+
+ index = alloc_irte(iommu, irq, 1);
+ if (index < 0)
+ panic("Failed to allocate IRTE for ioapic %d\n", apic);
+
+ memset(&irte, 0, sizeof(irte));
+
+ irte.present = 1;
+ irte.dst_mode = INT_DEST_MODE;
+ irte.trigger_mode = trigger;
+ irte.dlvry_mode = INT_DELIVERY_MODE;
+ irte.vector = vector;
+ irte.dest_id = IRTE_DEST(destination);
+
+ modify_irte(irq, &irte);
+
+ ir_entry->index2 = (index >> 15) & 0x1;
+ ir_entry->zero = 0;
+ ir_entry->format = 1;
+ ir_entry->index = (index & 0x7fff);
+ } else
+#endif
+ {
+ entry->delivery_mode = INT_DELIVERY_MODE;
+ entry->dest_mode = INT_DEST_MODE;
+ entry->dest = destination;
}
+
+ entry->mask = 0; /* enable IRQ */
+ entry->trigger = trigger;
+ entry->polarity = polarity;
+ entry->vector = vector;
+
+ /* Mask level triggered irqs.
+ * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+ */
+ if (trigger)
+ entry->mask = 1;
+ return 0;
}
static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
irq, trigger, polarity);
- /*
- * add it to the IO-APIC irq-routing table:
- */
- memset(&entry,0,sizeof(entry));
-
- entry.delivery_mode = INT_DELIVERY_MODE;
- entry.dest_mode = INT_DEST_MODE;
- entry.dest = cpu_mask_to_apicid(mask);
- entry.mask = 0; /* enable IRQ */
- entry.trigger = trigger;
- entry.polarity = polarity;
- entry.vector = cfg->vector;
- /* Mask level triggered irqs.
- * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
- */
- if (trigger)
- entry.mask = 1;
+ if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry,
+ cpu_mask_to_apicid(mask), trigger, polarity,
+ cfg->vector)) {
+ printk("Failed to setup ioapic entry for ioapic %d, pin %d\n",
+ mp_ioapics[apic].mp_apicid, pin);
+ __clear_irq_vector(irq);
+ return;
+ }
ioapic_register_intr(irq, trigger);
if (irq < 16)
{
struct IO_APIC_route_entry entry;
+ if (intr_remapping_enabled)
+ return;
+
memset(&entry, 0, sizeof(entry));
/*
ioapic_write_entry(apic, pin, entry);
}
-void __apicdebuginit print_IO_APIC(void)
+
+__apicdebuginit(void) print_IO_APIC(void)
{
int apic, i;
union IO_APIC_reg_00 reg_00;
return;
}
-#if 0
-
-static __apicdebuginit void print_APIC_bitfield (int base)
+__apicdebuginit(void) print_APIC_bitfield(int base)
{
unsigned int v;
int i, j;
}
}
-void __apicdebuginit print_local_APIC(void * dummy)
+__apicdebuginit(void) print_local_APIC(void *dummy)
{
unsigned int v, ver, maxlvt;
+ unsigned long icr;
if (apic_verbosity == APIC_QUIET)
return;
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
v = apic_read(APIC_ID);
- printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
+ printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id());
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
v = apic_read(APIC_ESR);
printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
- v = apic_read(APIC_ICR);
- printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
- v = apic_read(APIC_ICR2);
- printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
+ icr = apic_icr_read();
+ printk(KERN_DEBUG "... APIC ICR: %08x\n", icr);
+ printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32);
v = apic_read(APIC_LVTT);
printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
printk("\n");
}
-void print_all_local_APICs (void)
+__apicdebuginit(void) print_all_local_APICs(void)
{
on_each_cpu(print_local_APIC, NULL, 1);
}
-void __apicdebuginit print_PIC(void)
+__apicdebuginit(void) print_PIC(void)
{
unsigned int v;
unsigned long flags;
printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
}
-#endif /* 0 */
+__apicdebuginit(int) print_all_ICs(void)
+{
+ print_PIC();
+ print_all_local_APICs();
+ print_IO_APIC();
+
+ return 0;
+}
+
+fs_initcall(print_all_ICs);
+
void __init enable_IO_APIC(void)
{
entry.dest_mode = 0; /* Physical */
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
- entry.dest = GET_APIC_ID(read_apic_id());
+ entry.dest = read_apic_id();
/*
* Add it to the IO-APIC irq-routing table:
*/
#ifdef CONFIG_SMP
+
+#ifdef CONFIG_INTR_REMAP
+static void ir_irq_migration(struct work_struct *work);
+
+static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration);
+
+/*
+ * Migrate the IO-APIC irq in the presence of intr-remapping.
+ *
+ * For edge triggered, irq migration is a simple atomic update(of vector
+ * and cpu destination) of IRTE and flush the hardware cache.
+ *
+ * For level triggered, we need to modify the io-apic RTE aswell with the update
+ * vector information, along with modifying IRTE with vector and destination.
+ * So irq migration for level triggered is little bit more complex compared to
+ * edge triggered migration. But the good news is, we use the same algorithm
+ * for level triggered migration as we have today, only difference being,
+ * we now initiate the irq migration from process context instead of the
+ * interrupt context.
+ *
+ * In future, when we do a directed EOI (combined with cpu EOI broadcast
+ * suppression) to the IO-APIC, level triggered irq migration will also be
+ * as simple as edge triggered migration and we can do the irq migration
+ * with a simple atomic update to IO-APIC RTE.
+ */
+static void migrate_ioapic_irq(int irq, cpumask_t mask)
+{
+ struct irq_cfg *cfg = irq_cfg + irq;
+ struct irq_desc *desc = irq_desc + irq;
+ cpumask_t tmp, cleanup_mask;
+ struct irte irte;
+ int modify_ioapic_rte = desc->status & IRQ_LEVEL;
+ unsigned int dest;
+ unsigned long flags;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ return;
+
+ if (get_irte(irq, &irte))
+ return;
+
+ if (assign_irq_vector(irq, mask))
+ return;
+
+ cpus_and(tmp, cfg->domain, mask);
+ dest = cpu_mask_to_apicid(tmp);
+
+ if (modify_ioapic_rte) {
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __target_IO_APIC_irq(irq, dest, cfg->vector);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ }
+
+ irte.vector = cfg->vector;
+ irte.dest_id = IRTE_DEST(dest);
+
+ /*
+ * Modified the IRTE and flushes the Interrupt entry cache.
+ */
+ modify_irte(irq, &irte);
+
+ if (cfg->move_in_progress) {
+ cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+ cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+ send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+ cfg->move_in_progress = 0;
+ }
+
+ irq_desc[irq].affinity = mask;
+}
+
+static int migrate_irq_remapped_level(int irq)
+{
+ int ret = -1;
+
+ mask_IO_APIC_irq(irq);
+
+ if (io_apic_level_ack_pending(irq)) {
+ /*
+ * Interrupt in progress. Migrating irq now will change the
+ * vector information in the IO-APIC RTE and that will confuse
+ * the EOI broadcast performed by cpu.
+ * So, delay the irq migration to the next instance.
+ */
+ schedule_delayed_work(&ir_migration_work, 1);
+ goto unmask;
+ }
+
+ /* everthing is clear. we have right of way */
+ migrate_ioapic_irq(irq, irq_desc[irq].pending_mask);
+
+ ret = 0;
+ irq_desc[irq].status &= ~IRQ_MOVE_PENDING;
+ cpus_clear(irq_desc[irq].pending_mask);
+
+unmask:
+ unmask_IO_APIC_irq(irq);
+ return ret;
+}
+
+static void ir_irq_migration(struct work_struct *work)
+{
+ int irq;
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ struct irq_desc *desc = irq_desc + irq;
+ if (desc->status & IRQ_MOVE_PENDING) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ if (!desc->chip->set_affinity ||
+ !(desc->status & IRQ_MOVE_PENDING)) {
+ desc->status &= ~IRQ_MOVE_PENDING;
+ spin_unlock_irqrestore(&desc->lock, flags);
+ continue;
+ }
+
+ desc->chip->set_affinity(irq,
+ irq_desc[irq].pending_mask);
+ spin_unlock_irqrestore(&desc->lock, flags);
+ }
+ }
+}
+
+/*
+ * Migrates the IRQ destination in the process context.
+ */
+static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
+{
+ if (irq_desc[irq].status & IRQ_LEVEL) {
+ irq_desc[irq].status |= IRQ_MOVE_PENDING;
+ irq_desc[irq].pending_mask = mask;
+ migrate_irq_remapped_level(irq);
+ return;
+ }
+
+ migrate_ioapic_irq(irq, mask);
+}
+#endif
+
asmlinkage void smp_irq_move_cleanup_interrupt(void)
{
unsigned vector, me;
#else
static inline void irq_complete_move(unsigned int irq) {}
#endif
+#ifdef CONFIG_INTR_REMAP
+static void ack_x2apic_level(unsigned int irq)
+{
+ ack_x2APIC_irq();
+}
+
+static void ack_x2apic_edge(unsigned int irq)
+{
+ ack_x2APIC_irq();
+}
+#endif
static void ack_apic_edge(unsigned int irq)
{
.retrigger = ioapic_retrigger_irq,
};
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip ir_ioapic_chip __read_mostly = {
+ .name = "IR-IO-APIC",
+ .startup = startup_ioapic_irq,
+ .mask = mask_IO_APIC_irq,
+ .unmask = unmask_IO_APIC_irq,
+ .ack = ack_x2apic_edge,
+ .eoi = ack_x2apic_level,
+#ifdef CONFIG_SMP
+ .set_affinity = set_ir_ioapic_affinity_irq,
+#endif
+ .retrigger = ioapic_retrigger_irq,
+};
+#endif
+
static inline void init_IO_APIC_traps(void)
{
int irq;
* 8259A.
*/
if (pin1 == -1) {
+ if (intr_remapping_enabled)
+ panic("BIOS bug: timer not connected to IO-APIC");
pin1 = pin2;
apic1 = apic2;
no_pin1 = 1;
clear_IO_APIC_pin(0, pin1);
goto out;
}
+ if (intr_remapping_enabled)
+ panic("timer doesn't work through Interrupt-remapped IO-APIC");
clear_IO_APIC_pin(apic1, pin1);
if (!no_pin1)
apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
setup_IO_APIC_irqs();
init_IO_APIC_traps();
check_timer();
- if (!acpi_ioapic)
- print_IO_APIC();
}
struct sysfs_ioapic_data {
dynamic_irq_cleanup(irq);
+#ifdef CONFIG_INTR_REMAP
+ free_irte(irq);
+#endif
spin_lock_irqsave(&vector_lock, flags);
__clear_irq_vector(irq);
spin_unlock_irqrestore(&vector_lock, flags);
tmp = TARGET_CPUS;
err = assign_irq_vector(irq, tmp);
- if (!err) {
- cpus_and(tmp, cfg->domain, tmp);
- dest = cpu_mask_to_apicid(tmp);
+ if (err)
+ return err;
+
+ cpus_and(tmp, cfg->domain, tmp);
+ dest = cpu_mask_to_apicid(tmp);
+
+#ifdef CONFIG_INTR_REMAP
+ if (irq_remapped(irq)) {
+ struct irte irte;
+ int ir_index;
+ u16 sub_handle;
+
+ ir_index = map_irq_to_irte_handle(irq, &sub_handle);
+ BUG_ON(ir_index == -1);
+
+ memset (&irte, 0, sizeof(irte));
+
+ irte.present = 1;
+ irte.dst_mode = INT_DEST_MODE;
+ irte.trigger_mode = 0; /* edge */
+ irte.dlvry_mode = INT_DELIVERY_MODE;
+ irte.vector = cfg->vector;
+ irte.dest_id = IRTE_DEST(dest);
+
+ modify_irte(irq, &irte);
+ msg->address_hi = MSI_ADDR_BASE_HI;
+ msg->data = sub_handle;
+ msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
+ MSI_ADDR_IR_SHV |
+ MSI_ADDR_IR_INDEX1(ir_index) |
+ MSI_ADDR_IR_INDEX2(ir_index);
+ } else
+#endif
+ {
msg->address_hi = MSI_ADDR_BASE_HI;
msg->address_lo =
MSI_ADDR_BASE_LO |
write_msi_msg(irq, &msg);
irq_desc[irq].affinity = mask;
}
+
+#ifdef CONFIG_INTR_REMAP
+/*
+ * Migrate the MSI irq to another cpumask. This migration is
+ * done in the process context using interrupt-remapping hardware.
+ */
+static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+ struct irq_cfg *cfg = irq_cfg + irq;
+ unsigned int dest;
+ cpumask_t tmp, cleanup_mask;
+ struct irte irte;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ return;
+
+ if (get_irte(irq, &irte))
+ return;
+
+ if (assign_irq_vector(irq, mask))
+ return;
+
+ cpus_and(tmp, cfg->domain, mask);
+ dest = cpu_mask_to_apicid(tmp);
+
+ irte.vector = cfg->vector;
+ irte.dest_id = IRTE_DEST(dest);
+
+ /*
+ * atomically update the IRTE with the new destination and vector.
+ */
+ modify_irte(irq, &irte);
+
+ /*
+ * After this point, all the interrupts will start arriving
+ * at the new destination. So, time to cleanup the previous
+ * vector allocation.
+ */
+ if (cfg->move_in_progress) {
+ cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+ cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+ send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+ cfg->move_in_progress = 0;
+ }
+
+ irq_desc[irq].affinity = mask;
+}
+#endif
#endif /* CONFIG_SMP */
/*
.retrigger = ioapic_retrigger_irq,
};
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+#ifdef CONFIG_INTR_REMAP
+static struct irq_chip msi_ir_chip = {
+ .name = "IR-PCI-MSI",
+ .unmask = unmask_msi_irq,
+ .mask = mask_msi_irq,
+ .ack = ack_x2apic_edge,
+#ifdef CONFIG_SMP
+ .set_affinity = ir_set_msi_irq_affinity,
+#endif
+ .retrigger = ioapic_retrigger_irq,
+};
+
+/*
+ * Map the PCI dev to the corresponding remapping hardware unit
+ * and allocate 'nvec' consecutive interrupt-remapping table entries
+ * in it.
+ */
+static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
{
+ struct intel_iommu *iommu;
+ int index;
+
+ iommu = map_dev_to_ir(dev);
+ if (!iommu) {
+ printk(KERN_ERR
+ "Unable to map PCI %s to iommu\n", pci_name(dev));
+ return -ENOENT;
+ }
+
+ index = alloc_irte(iommu, irq, nvec);
+ if (index < 0) {
+ printk(KERN_ERR
+ "Unable to allocate %d IRTE for PCI %s\n", nvec,
+ pci_name(dev));
+ return -ENOSPC;
+ }
+ return index;
+}
+#endif
+
+static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq)
+{
+ int ret;
struct msi_msg msg;
+
+ ret = msi_compose_msg(dev, irq, &msg);
+ if (ret < 0)
+ return ret;
+
+ set_irq_msi(irq, desc);
+ write_msi_msg(irq, &msg);
+
+#ifdef CONFIG_INTR_REMAP
+ if (irq_remapped(irq)) {
+ struct irq_desc *desc = irq_desc + irq;
+ /*
+ * irq migration in process context
+ */
+ desc->status |= IRQ_MOVE_PCNTXT;
+ set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge");
+ } else
+#endif
+ set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+
+ return 0;
+}
+
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+{
int irq, ret;
+
irq = create_irq();
if (irq < 0)
return irq;
- ret = msi_compose_msg(dev, irq, &msg);
+#ifdef CONFIG_INTR_REMAP
+ if (!intr_remapping_enabled)
+ goto no_ir;
+
+ ret = msi_alloc_irte(dev, irq, 1);
+ if (ret < 0)
+ goto error;
+no_ir:
+#endif
+ ret = setup_msi_irq(dev, desc, irq);
if (ret < 0) {
destroy_irq(irq);
return ret;
}
+ return 0;
- set_irq_msi(irq, desc);
- write_msi_msg(irq, &msg);
+#ifdef CONFIG_INTR_REMAP
+error:
+ destroy_irq(irq);
+ return ret;
+#endif
+}
- set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ int irq, ret, sub_handle;
+ struct msi_desc *desc;
+#ifdef CONFIG_INTR_REMAP
+ struct intel_iommu *iommu = 0;
+ int index = 0;
+#endif
+
+ sub_handle = 0;
+ list_for_each_entry(desc, &dev->msi_list, list) {
+ irq = create_irq();
+ if (irq < 0)
+ return irq;
+#ifdef CONFIG_INTR_REMAP
+ if (!intr_remapping_enabled)
+ goto no_ir;
+ if (!sub_handle) {
+ /*
+ * allocate the consecutive block of IRTE's
+ * for 'nvec'
+ */
+ index = msi_alloc_irte(dev, irq, nvec);
+ if (index < 0) {
+ ret = index;
+ goto error;
+ }
+ } else {
+ iommu = map_dev_to_ir(dev);
+ if (!iommu) {
+ ret = -ENOENT;
+ goto error;
+ }
+ /*
+ * setup the mapping between the irq and the IRTE
+ * base index, the sub_handle pointing to the
+ * appropriate interrupt remap table entry.
+ */
+ set_irte_irq(irq, iommu, index, sub_handle);
+ }
+no_ir:
+#endif
+ ret = setup_msi_irq(dev, desc, irq);
+ if (ret < 0)
+ goto error;
+ sub_handle++;
+ }
return 0;
+
+error:
+ destroy_irq(irq);
+ return ret;
}
void arch_teardown_msi_irq(unsigned int irq)
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
+#ifdef CONFIG_INTR_REMAP
+ else if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
else
set_ioapic_affinity_irq(irq, TARGET_CPUS);
}
}
}
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+ .handler = no_action,
+ .mask = CPU_MASK_NONE,
+ .name = "cascade",
+};
+
/* Overridden in paravirt.c */
void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
set_intr_gate(vector, interrupt[i]);
}
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
+ /*
+ * IRQ0 must be given a fixed assignment and initialized,
+ * because it's used before the IO-APIC is set up.
+ */
+ set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+
+ /*
+ * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+ * IPI, driven by wakeup.
+ */
+ alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+ /* IPI for invalidation */
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+
+ /* IPI for generic function call */
+ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+ /* IPI for single call function */
+ set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt);
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ /* self generated IPI for local APIC timer */
+ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+ /* IPI vectors for APIC spurious and error interrupts */
+ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+ alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+#endif
+
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
+ /* thermal monitor LVT interrupt */
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+
+ if (!acpi_ioapic)
+ setup_irq(2, &irq2);
+
/* setup after call gates are initialised (usually add in
* the architecture specific gates)
*/
generic_bigsmp_probe();
#endif
+#ifdef CONFIG_X86_32
setup_apic_routing();
+#endif
if (!num_processors)
printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;
}
}
+static int __init numaq_setup_ioapic_ids(void)
+{
+ /* so can skip it */
+ return 1;
+}
+
static struct x86_quirks numaq_x86_quirks __initdata = {
.arch_pre_time_init = numaq_pre_time_init,
.arch_time_init = NULL,
.mpc_oem_bus_info = mpc_oem_bus_info,
.mpc_oem_pci_bus = mpc_oem_pci_bus,
.smp_read_mpc_oem = smp_read_mpc_oem,
+ .setup_ioapic_ids = numaq_setup_ioapic_ids,
};
void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
struct pv_apic_ops pv_apic_ops = {
#ifdef CONFIG_X86_LOCAL_APIC
- .apic_write = native_apic_write,
- .apic_read = native_apic_read,
.setup_boot_clock = setup_boot_APIC_clock,
.setup_secondary_clock = setup_secondary_APIC_clock,
.startup_ipi_hook = paravirt_nop,
EXPORT_SYMBOL(idle_nomwait);
struct kmem_cache *task_xstate_cachep;
-static int force_mwait __cpuinitdata;
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
#else
num_physpages = max_pfn;
+ if (cpu_has_x2apic)
+ check_x2apic();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
char __user *pretcode;
int sig;
struct sigcontext sc;
- struct _fpstate fpstate;
+ /*
+ * fpstate is unused. fpstate is moved/allocated after
+ * retcode[] below. This movement allows to have the FP state and the
+ * future state extensions (xsave) stay together.
+ * And at the same time retaining the unused fpstate, prevents changing
+ * the offset of extramask[] in the sigframe and thus prevent any
+ * legacy application accessing/modifying it.
+ */
+ struct _fpstate fpstate_unused;
unsigned long extramask[_NSIG_WORDS-1];
char retcode[8];
+ /* fp state follows here */
};
struct rt_sigframe {
void __user *puc;
struct siginfo info;
struct ucontext uc;
- struct _fpstate fpstate;
char retcode[8];
+ /* fp state follows here */
};
#else
struct rt_sigframe {
char __user *pretcode;
struct ucontext uc;
struct siginfo info;
+ /* fp state follows here */
};
int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
}
{
- struct _fpstate __user *buf;
+ void __user *buf;
err |= __get_user(buf, &sc->fpstate);
- if (buf) {
- if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
- goto badframe;
- err |= restore_i387(buf);
- } else {
- struct task_struct *me = current;
-
- if (used_math()) {
- clear_fpu(me);
- clear_used_math();
- }
- }
+ err |= restore_i387_xstate(buf);
}
err |= __get_user(*pax, &sc->ax);
return err;
-
-badframe:
- return 1;
}
asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
* Set up a signal frame.
*/
static int
-setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
+setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
struct pt_regs *regs, unsigned long mask)
{
int tmp, err = 0;
err |= __put_user(regs->sp, &sc->sp_at_signal);
err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss);
- tmp = save_i387(fpstate);
+ tmp = save_i387_xstate(fpstate);
if (tmp < 0)
err = 1;
else
* Determine which stack to use..
*/
static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size,
+ void **fpstate)
{
unsigned long sp;
sp = (unsigned long) ka->sa.sa_restorer;
}
+ if (used_math()) {
+ sp = sp - sig_xstate_size;
+ *fpstate = (struct _fpstate *) sp;
+ }
+
sp -= frame_size;
/*
* Align the stack pointer according to the i386 ABI,
void __user *restorer;
int err = 0;
int usig;
+ void __user *fpstate = NULL;
- frame = get_sigframe(ka, regs, sizeof(*frame));
+ frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
if (err)
goto give_sigsegv;
- err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]);
+ err = setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]);
if (err)
goto give_sigsegv;
void __user *restorer;
int err = 0;
int usig;
+ void __user *fpstate = NULL;
- frame = get_sigframe(ka, regs, sizeof(*frame));
+ frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
goto give_sigsegv;
/* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
+ if (cpu_has_xsave)
+ err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+ else
+ err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->sp),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
return do_sigaltstack(uss, uoss, regs->sp);
}
-/*
- * Signal frame handlers.
- */
-
-static inline int save_i387(struct _fpstate __user *buf)
-{
- struct task_struct *tsk = current;
- int err = 0;
-
- BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
- sizeof(tsk->thread.xstate->fxsave));
-
- if ((unsigned long)buf % 16)
- printk("save_i387: bad fpstate %p\n", buf);
-
- if (!used_math())
- return 0;
- clear_used_math(); /* trigger finit */
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- err = save_i387_checking((struct i387_fxsave_struct __user *)
- buf);
- if (err)
- return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
- } else {
- if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
- sizeof(struct i387_fxsave_struct)))
- return -1;
- }
- return 1;
-}
-
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-static inline int restore_i387(struct _fpstate __user *buf)
-{
- struct task_struct *tsk = current;
- int err;
-
- if (!used_math()) {
- err = init_fpu(tsk);
- if (err)
- return err;
- }
-
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
- err = restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
- if (unlikely(err)) {
- /*
- * Encountered an error while doing the restore from the
- * user buffer, clear the fpu state.
- */
- clear_fpu(tsk);
- clear_used_math();
- }
- return err;
-}
-
/*
* Do a signal return; undo the signal stack.
*/
{
struct _fpstate __user *buf;
err |= __get_user(buf, &sc->fpstate);
-
- if (buf) {
- if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
- goto badframe;
- err |= restore_i387(buf);
- } else {
- struct task_struct *me = current;
- if (used_math()) {
- clear_fpu(me);
- clear_used_math();
- }
- }
+ err |= restore_i387_xstate(buf);
}
err |= __get_user(*pax, &sc->ax);
return err;
-
-badframe:
- return 1;
}
asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
sp = current->sas_ss_sp + current->sas_ss_size;
}
- return (void __user *)round_down(sp - size, 16);
+ return (void __user *)round_down(sp - size, 64);
}
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
- struct _fpstate __user *fp = NULL;
+ void __user *fp = NULL;
int err = 0;
struct task_struct *me = current;
if (used_math()) {
- fp = get_stack(ka, regs, sizeof(struct _fpstate));
+ fp = get_stack(ka, regs, sig_xstate_size);
frame = (void __user *)round_down(
(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
- if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
- goto give_sigsegv;
-
- if (save_i387(fp) < 0)
+ if (save_i387_xstate(fp) < 0)
err |= -1;
} else
frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
}
/* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
+ if (cpu_has_xsave)
+ err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags);
+ else
+ err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->sp),
static atomic_t init_deasserted;
-static int boot_cpu_logical_apicid;
/* representing cpus for which sibling maps can be computed */
static cpumask_t cpu_sibling_setup_map;
#endif
#ifdef CONFIG_X86_32
+static int boot_cpu_logical_apicid;
+
u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly =
{ [0 ... NR_CPUS-1] = BAD_APICID };
/*
* (This works even if the APIC is not enabled.)
*/
- phys_id = GET_APIC_ID(read_apic_id());
+ phys_id = read_apic_id();
cpuid = smp_processor_id();
if (cpu_isset(cpuid, cpu_callin_map)) {
panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
printk(KERN_CONT
"a previous APIC delivery may have failed\n");
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
- apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
+ apic_icr_write(APIC_DM_REMRD | regs[i], apicid);
timeout = 0;
do {
int maxlvt;
/* Target chip */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
-
/* Boot on the stack */
/* Kick the second */
- apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+ apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid);
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
/*
* Turn INIT on target chip
*/
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
/*
* Send IPI
*/
- apic_write(APIC_ICR,
- APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
+ apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT,
+ phys_apicid);
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
pr_debug("Deasserting INIT.\n");
/* Target chip */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
/* Send IPI */
- apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+ apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid);
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
*/
/* Target chip */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
/* Boot on the stack */
/* Kick the second */
- apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12));
+ apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12),
+ phys_apicid);
/*
* Give the other CPU some time to accept the IPI.
* Setup boot CPU information
*/
smp_store_cpu_info(0); /* Final full version of the data */
+#ifdef CONFIG_X86_32
boot_cpu_logical_apicid = logical_smp_processor_id();
+#endif
current_thread_info()->cpu = 0; /* needed? */
set_cpu_sibling_map(0);
+#ifdef CONFIG_X86_64
+ enable_IR_x2apic();
+ setup_apic_routing();
+#endif
+
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
}
preempt_disable();
- if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) {
+ if (read_apic_id() != boot_cpu_physical_apicid) {
panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
- GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid);
+ read_apic_id(), boot_cpu_physical_apicid);
/* Or can we switch back to PIC here? */
}
preempt_enable();
#include <linux/init.h>
#include <asm/io.h>
#include <asm/bios_ebda.h>
-#include <asm/mach-summit/mach_mpparse.h>
+#include <asm/summit/mpparse.h>
static struct rio_table_hdr *rio_table_hdr __initdata;
static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
set_bit(SYSCALL_VECTOR, used_vectors);
- init_thread_xstate();
/*
* Should be a barrier for any external CPU state:
*/
/*
* Paranoid restore. send a SIGSEGV if we fail to restore the state.
*/
- if (unlikely(restore_fpu_checking(&me->thread.xstate->fxsave))) {
+ if (unlikely(restore_fpu_checking(me))) {
stts();
force_sig(SIGSEGV, me);
return;
#ifdef CONFIG_IA32_EMULATION
set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
#endif
- /*
- * initialize the per thread extended state:
- */
- init_thread_xstate();
/*
* Should be a barrier for any external CPU state:
*/
#endif
#ifdef CONFIG_X86_LOCAL_APIC
- para_fill(pv_apic_ops.apic_read, APICRead);
- para_fill(pv_apic_ops.apic_write, APICWrite);
+ para_fill(apic_ops->read, APICRead);
+ para_fill(apic_ops->write, APICWrite);
#endif
/*
*(.con_initcall.init)
__con_initcall_end = .;
}
- .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
- __x86cpuvendor_start = .;
- *(.x86cpuvendor.init)
- __x86cpuvendor_end = .;
+ .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+ __x86_cpu_dev_start = .;
+ *(.x86_cpu_dev.init)
+ __x86_cpu_dev_end = .;
}
SECURITY_INIT
. = ALIGN(4);
. = ALIGN(PAGE_SIZE);
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
__per_cpu_start = .;
+ *(.data.percpu.page_aligned)
*(.data.percpu)
*(.data.percpu.shared_aligned)
__per_cpu_end = .;
*(.con_initcall.init)
}
__con_initcall_end = .;
- . = ALIGN(16);
- __x86cpuvendor_start = .;
- .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
- *(.x86cpuvendor.init)
+ __x86_cpu_dev_start = .;
+ .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+ *(.x86_cpu_dev.init)
}
- __x86cpuvendor_end = .;
SECURITY_INIT
+ __x86_cpu_dev_end = .;
. = ALIGN(8);
.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
--- /dev/null
+/*
+ * xsave/xrstor support.
+ *
+ * Author: Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+#include <linux/bootmem.h>
+#include <linux/compat.h>
+#include <asm/i387.h>
+#ifdef CONFIG_IA32_EMULATION
+#include <asm/sigcontext32.h>
+#endif
+#include <asm/xcr.h>
+
+/*
+ * Supported feature mask by the CPU and the kernel.
+ */
+u64 pcntxt_mask;
+
+struct _fpx_sw_bytes fx_sw_reserved;
+#ifdef CONFIG_IA32_EMULATION
+struct _fpx_sw_bytes fx_sw_reserved_ia32;
+#endif
+
+/*
+ * Check for the presence of extended state information in the
+ * user fpstate pointer in the sigcontext.
+ */
+int check_for_xstate(struct i387_fxsave_struct __user *buf,
+ void __user *fpstate,
+ struct _fpx_sw_bytes *fx_sw_user)
+{
+ int min_xstate_size = sizeof(struct i387_fxsave_struct) +
+ sizeof(struct xsave_hdr_struct);
+ unsigned int magic2;
+ int err;
+
+ err = __copy_from_user(fx_sw_user, &buf->sw_reserved[0],
+ sizeof(struct _fpx_sw_bytes));
+
+ if (err)
+ return err;
+
+ /*
+ * First Magic check failed.
+ */
+ if (fx_sw_user->magic1 != FP_XSTATE_MAGIC1)
+ return -1;
+
+ /*
+ * Check for error scenarios.
+ */
+ if (fx_sw_user->xstate_size < min_xstate_size ||
+ fx_sw_user->xstate_size > xstate_size ||
+ fx_sw_user->xstate_size > fx_sw_user->extended_size)
+ return -1;
+
+ err = __get_user(magic2, (__u32 *) (((void *)fpstate) +
+ fx_sw_user->extended_size -
+ FP_XSTATE_MAGIC2_SIZE));
+ /*
+ * Check for the presence of second magic word at the end of memory
+ * layout. This detects the case where the user just copied the legacy
+ * fpstate layout with out copying the extended state information
+ * in the memory layout.
+ */
+ if (err || magic2 != FP_XSTATE_MAGIC2)
+ return -1;
+
+ return 0;
+}
+
+#ifdef CONFIG_X86_64
+/*
+ * Signal frame handlers.
+ */
+
+int save_i387_xstate(void __user *buf)
+{
+ struct task_struct *tsk = current;
+ int err = 0;
+
+ if (!access_ok(VERIFY_WRITE, buf, sig_xstate_size))
+ return -EACCES;
+
+ BUG_ON(sig_xstate_size < xstate_size);
+
+ if ((unsigned long)buf % 64)
+ printk("save_i387_xstate: bad fpstate %p\n", buf);
+
+ if (!used_math())
+ return 0;
+ clear_used_math(); /* trigger finit */
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ /*
+ * Start with clearing the user buffer. This will present a
+ * clean context for the bytes not touched by the fxsave/xsave.
+ */
+ __clear_user(buf, sig_xstate_size);
+
+ if (task_thread_info(tsk)->status & TS_XSAVE)
+ err = xsave_user(buf);
+ else
+ err = fxsave_user(buf);
+
+ if (err)
+ return err;
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ stts();
+ } else {
+ if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+ xstate_size))
+ return -1;
+ }
+
+ if (task_thread_info(tsk)->status & TS_XSAVE) {
+ struct _fpstate __user *fx = buf;
+
+ err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved,
+ sizeof(struct _fpx_sw_bytes));
+
+ err |= __put_user(FP_XSTATE_MAGIC2,
+ (__u32 __user *) (buf + sig_xstate_size
+ - FP_XSTATE_MAGIC2_SIZE));
+ }
+
+ return 1;
+}
+
+/*
+ * Restore the extended state if present. Otherwise, restore the FP/SSE
+ * state.
+ */
+int restore_user_xstate(void __user *buf)
+{
+ struct _fpx_sw_bytes fx_sw_user;
+ u64 mask;
+ int err;
+
+ if (((unsigned long)buf % 64) ||
+ check_for_xstate(buf, buf, &fx_sw_user))
+ goto fx_only;
+
+ mask = fx_sw_user.xstate_bv;
+
+ /*
+ * restore the state passed by the user.
+ */
+ err = xrestore_user(buf, mask);
+ if (err)
+ return err;
+
+ /*
+ * init the state skipped by the user.
+ */
+ mask = pcntxt_mask & ~mask;
+
+ xrstor_state(init_xstate_buf, mask);
+
+ return 0;
+
+fx_only:
+ /*
+ * couldn't find the extended state information in the
+ * memory layout. Restore just the FP/SSE and init all
+ * the other extended state.
+ */
+ xrstor_state(init_xstate_buf, pcntxt_mask & ~XSTATE_FPSSE);
+ return fxrstor_checking((__force struct i387_fxsave_struct *)buf);
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+int restore_i387_xstate(void __user *buf)
+{
+ struct task_struct *tsk = current;
+ int err = 0;
+
+ if (!buf) {
+ if (used_math())
+ goto clear;
+ return 0;
+ } else
+ if (!access_ok(VERIFY_READ, buf, sig_xstate_size))
+ return -EACCES;
+
+ if (!used_math()) {
+ err = init_fpu(tsk);
+ if (err)
+ return err;
+ }
+
+ if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+ clts();
+ task_thread_info(current)->status |= TS_USEDFPU;
+ }
+ if (task_thread_info(tsk)->status & TS_XSAVE)
+ err = restore_user_xstate(buf);
+ else
+ err = fxrstor_checking((__force struct i387_fxsave_struct *)
+ buf);
+ if (unlikely(err)) {
+ /*
+ * Encountered an error while doing the restore from the
+ * user buffer, clear the fpu state.
+ */
+clear:
+ clear_fpu(tsk);
+ clear_used_math();
+ }
+ return err;
+}
+#endif
+
+/*
+ * Prepare the SW reserved portion of the fxsave memory layout, indicating
+ * the presence of the extended state information in the memory layout
+ * pointed by the fpstate pointer in the sigcontext.
+ * This will be saved when ever the FP and extended state context is
+ * saved on the user stack during the signal handler delivery to the user.
+ */
+void prepare_fx_sw_frame(void)
+{
+ int size_extended = (xstate_size - sizeof(struct i387_fxsave_struct)) +
+ FP_XSTATE_MAGIC2_SIZE;
+
+ sig_xstate_size = sizeof(struct _fpstate) + size_extended;
+
+#ifdef CONFIG_IA32_EMULATION
+ sig_xstate_ia32_size = sizeof(struct _fpstate_ia32) + size_extended;
+#endif
+
+ memset(&fx_sw_reserved, 0, sizeof(fx_sw_reserved));
+
+ fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1;
+ fx_sw_reserved.extended_size = sig_xstate_size;
+ fx_sw_reserved.xstate_bv = pcntxt_mask;
+ fx_sw_reserved.xstate_size = xstate_size;
+#ifdef CONFIG_IA32_EMULATION
+ memcpy(&fx_sw_reserved_ia32, &fx_sw_reserved,
+ sizeof(struct _fpx_sw_bytes));
+ fx_sw_reserved_ia32.extended_size = sig_xstate_ia32_size;
+#endif
+}
+
+/*
+ * Represents init state for the supported extended state.
+ */
+struct xsave_struct *init_xstate_buf;
+
+#ifdef CONFIG_X86_64
+unsigned int sig_xstate_size = sizeof(struct _fpstate);
+#endif
+
+/*
+ * Enable the extended processor state save/restore feature
+ */
+void __cpuinit xsave_init(void)
+{
+ if (!cpu_has_xsave)
+ return;
+
+ set_in_cr4(X86_CR4_OSXSAVE);
+
+ /*
+ * Enable all the features that the HW is capable of
+ * and the Linux kernel is aware of.
+ */
+ xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+}
+
+/*
+ * setup the xstate image representing the init state
+ */
+void setup_xstate_init(void)
+{
+ init_xstate_buf = alloc_bootmem(xstate_size);
+ init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
+}
+
+/*
+ * Enable and initialize the xsave feature.
+ */
+void __init xsave_cntxt_init(void)
+{
+ unsigned int eax, ebx, ecx, edx;
+
+ cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
+ pcntxt_mask = eax + ((u64)edx << 32);
+
+ if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) {
+ printk(KERN_ERR "FP/SSE not shown under xsave features 0x%llx\n",
+ pcntxt_mask);
+ BUG();
+ }
+
+ /*
+ * for now OS knows only about FP/SSE
+ */
+ pcntxt_mask = pcntxt_mask & XCNTXT_MASK;
+ xsave_init();
+
+ /*
+ * Recompute the context size for enabled features
+ */
+ cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
+ xstate_size = ebx;
+
+ prepare_fx_sw_frame();
+
+ setup_xstate_init();
+
+ printk(KERN_INFO "xsave/xrstor: enabled xstate_bv 0x%llx, "
+ "cntxt size 0x%x\n",
+ pcntxt_mask, xstate_size);
+}
#define AR_RESERVD_MASK 0xfffe0f00
-#define MSR_IA32_VMX_BASIC 0x480
-#define MSR_IA32_VMX_PINBASED_CTLS 0x481
-#define MSR_IA32_VMX_PROCBASED_CTLS 0x482
-#define MSR_IA32_VMX_EXIT_CTLS 0x483
-#define MSR_IA32_VMX_ENTRY_CTLS 0x484
-#define MSR_IA32_VMX_MISC 0x485
-#define MSR_IA32_VMX_CR0_FIXED0 0x486
-#define MSR_IA32_VMX_CR0_FIXED1 0x487
-#define MSR_IA32_VMX_CR4_FIXED0 0x488
-#define MSR_IA32_VMX_CR4_FIXED1 0x489
-#define MSR_IA32_VMX_VMCS_ENUM 0x48a
-#define MSR_IA32_VMX_PROCBASED_CTLS2 0x48b
-#define MSR_IA32_VMX_EPT_VPID_CAP 0x48c
-
-#define MSR_IA32_FEATURE_CONTROL 0x3a
#define MSR_IA32_FEATURE_CONTROL_LOCKED 0x1
#define MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED 0x4
#include <linux/lguest_launcher.h>
#include <linux/virtio_console.h>
#include <linux/pm.h>
+#include <asm/apic.h>
#include <asm/lguest.h>
#include <asm/paravirt.h>
#include <asm/param.h>
* code qualifies for Advanced. It will also never interrupt anything. It
* does, however, allow us to get through the Linux boot code. */
#ifdef CONFIG_X86_LOCAL_APIC
-static void lguest_apic_write(unsigned long reg, u32 v)
+static void lguest_apic_write(u32 reg, u32 v)
{
}
-static u32 lguest_apic_read(unsigned long reg)
+static u32 lguest_apic_read(u32 reg)
{
return 0;
}
+
+static u64 lguest_apic_icr_read(void)
+{
+ return 0;
+}
+
+static void lguest_apic_icr_write(u32 low, u32 id)
+{
+ /* Warn to see if there's any stray references */
+ WARN_ON(1);
+}
+
+static void lguest_apic_wait_icr_idle(void)
+{
+ return;
+}
+
+static u32 lguest_apic_safe_wait_icr_idle(void)
+{
+ return 0;
+}
+
+static struct apic_ops lguest_basic_apic_ops = {
+ .read = lguest_apic_read,
+ .write = lguest_apic_write,
+ .icr_read = lguest_apic_icr_read,
+ .icr_write = lguest_apic_icr_write,
+ .wait_icr_idle = lguest_apic_wait_icr_idle,
+ .safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle,
+};
#endif
/* STOP! Until an interrupt comes in. */
#ifdef CONFIG_X86_LOCAL_APIC
/* apic read/write intercepts */
- pv_apic_ops.apic_write = lguest_apic_write;
- pv_apic_ops.apic_read = lguest_apic_read;
+ apic_ops = &lguest_basic_apic_ops;
#endif
/* time operations */
lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
else
obj-y += io_64.o iomap_copy_64.o
-
- CFLAGS_csum-partial_64.o := -funroll-loops
-
lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o
lib-y += thunk_64.o clear_page_64.o copy_page_64.o
lib-y += memmove_64.o memset_64.o
#include <asm/uaccess.h>
#include <asm/mmx.h>
+#ifdef CONFIG_X86_INTEL_USERCOPY
+/*
+ * Alignment at which movsl is preferred for bulk memory copies.
+ */
+struct movsl_mask movsl_mask __read_mostly;
+#endif
+
static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned long n)
{
#ifdef CONFIG_X86_INTEL_USERCOPY
init_ISA_irqs();
}
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
- .handler = no_action,
- .mask = CPU_MASK_NONE,
- .name = "cascade",
-};
-
/**
* intr_init_hook - post gate setup interrupt initialisation
*
if (x86_quirks->arch_intr_init())
return;
}
-#ifdef CONFIG_X86_LOCAL_APIC
- apic_intr_init();
-#endif
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
}
/**
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_X86_ES7000) := es7000plat.o
+++ /dev/null
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- * Natalie Protasevich, Unisys Corporation
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-/*
- * ES7000 chipsets
- */
-
-#define NON_UNISYS 0
-#define ES7000_CLASSIC 1
-#define ES7000_ZORRO 2
-
-
-#define MIP_REG 1
-#define MIP_PSAI_REG 4
-
-#define MIP_BUSY 1
-#define MIP_SPIN 0xf0000
-#define MIP_VALID 0x0100000000000000ULL
-#define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff)
-
-#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff)
-
-struct mip_reg_info {
- unsigned long long mip_info;
- unsigned long long delivery_info;
- unsigned long long host_reg;
- unsigned long long mip_reg;
-};
-
-struct part_info {
- unsigned char type;
- unsigned char length;
- unsigned char part_id;
- unsigned char apic_mode;
- unsigned long snum;
- char ptype[16];
- char sname[64];
- char pname[64];
-};
-
-struct psai {
- unsigned long long entry_type;
- unsigned long long addr;
- unsigned long long bep_addr;
-};
-
-struct es7000_mem_info {
- unsigned char type;
- unsigned char length;
- unsigned char resv[6];
- unsigned long long start;
- unsigned long long size;
-};
-
-struct es7000_oem_table {
- unsigned long long hdr;
- struct mip_reg_info mip;
- struct part_info pif;
- struct es7000_mem_info shm;
- struct psai psai;
-};
-
-#ifdef CONFIG_ACPI
-
-struct oem_table {
- struct acpi_table_header Header;
- u32 OEMTableAddr;
- u32 OEMTableSize;
-};
-
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-#endif
-
-struct mip_reg {
- unsigned long long off_0;
- unsigned long long off_8;
- unsigned long long off_10;
- unsigned long long off_18;
- unsigned long long off_20;
- unsigned long long off_28;
- unsigned long long off_30;
- unsigned long long off_38;
-};
-
-#define MIP_SW_APIC 0x1020b
-#define MIP_FUNC(VALUE) (VALUE & 0xff)
-
-extern int parse_unisys_oem (char *oemptr);
-extern void setup_unisys(void);
-extern int es7000_start_cpu(int cpu, unsigned long eip);
-extern void es7000_sw_apic(void);
+++ /dev/null
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- * Natalie Protasevich, Unisys Corporation
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <asm/io.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/apicdef.h>
-#include "es7000.h"
-#include <mach_mpparse.h>
-
-/*
- * ES7000 Globals
- */
-
-static volatile unsigned long *psai = NULL;
-static struct mip_reg *mip_reg;
-static struct mip_reg *host_reg;
-static int mip_port;
-static unsigned long mip_addr, host_addr;
-
-int es7000_plat;
-
-/*
- * GSI override for ES7000 platforms.
- */
-
-static unsigned int base;
-
-static int
-es7000_rename_gsi(int ioapic, int gsi)
-{
- if (es7000_plat == ES7000_ZORRO)
- return gsi;
-
- if (!base) {
- int i;
- for (i = 0; i < nr_ioapics; i++)
- base += nr_ioapic_registers[i];
- }
-
- if (!ioapic && (gsi < 16))
- gsi += base;
- return gsi;
-}
-
-void __init
-setup_unisys(void)
-{
- /*
- * Determine the generation of the ES7000 currently running.
- *
- * es7000_plat = 1 if the machine is a 5xx ES7000 box
- * es7000_plat = 2 if the machine is a x86_64 ES7000 box
- *
- */
- if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
- es7000_plat = ES7000_ZORRO;
- else
- es7000_plat = ES7000_CLASSIC;
- ioapic_renumber_irq = es7000_rename_gsi;
-}
-
-/*
- * Parse the OEM Table
- */
-
-int __init
-parse_unisys_oem (char *oemptr)
-{
- int i;
- int success = 0;
- unsigned char type, size;
- unsigned long val;
- char *tp = NULL;
- struct psai *psaip = NULL;
- struct mip_reg_info *mi;
- struct mip_reg *host, *mip;
-
- tp = oemptr;
-
- tp += 8;
-
- for (i=0; i <= 6; i++) {
- type = *tp++;
- size = *tp++;
- tp -= 2;
- switch (type) {
- case MIP_REG:
- mi = (struct mip_reg_info *)tp;
- val = MIP_RD_LO(mi->host_reg);
- host_addr = val;
- host = (struct mip_reg *)val;
- host_reg = __va(host);
- val = MIP_RD_LO(mi->mip_reg);
- mip_port = MIP_PORT(mi->mip_info);
- mip_addr = val;
- mip = (struct mip_reg *)val;
- mip_reg = __va(mip);
- pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
- (unsigned long)host_reg);
- pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
- (unsigned long)mip_reg);
- success++;
- break;
- case MIP_PSAI_REG:
- psaip = (struct psai *)tp;
- if (tp != NULL) {
- if (psaip->addr)
- psai = __va(psaip->addr);
- else
- psai = NULL;
- success++;
- }
- break;
- default:
- break;
- }
- tp += size;
- }
-
- if (success < 2) {
- es7000_plat = NON_UNISYS;
- } else
- setup_unisys();
- return es7000_plat;
-}
-
-#ifdef CONFIG_ACPI
-int __init
-find_unisys_acpi_oem_table(unsigned long *oem_addr)
-{
- struct acpi_table_header *header = NULL;
- int i = 0;
- while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
- if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
- struct oem_table *t = (struct oem_table *)header;
- *oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
- t->OEMTableSize);
- return 0;
- }
- }
- return -1;
-}
-#endif
-
-static void
-es7000_spin(int n)
-{
- int i = 0;
-
- while (i++ < n)
- rep_nop();
-}
-
-static int __init
-es7000_mip_write(struct mip_reg *mip_reg)
-{
- int status = 0;
- int spin;
-
- spin = MIP_SPIN;
- while (((unsigned long long)host_reg->off_38 &
- (unsigned long long)MIP_VALID) != 0) {
- if (--spin <= 0) {
- printk("es7000_mip_write: Timeout waiting for Host Valid Flag");
- return -1;
- }
- es7000_spin(MIP_SPIN);
- }
-
- memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
- outb(1, mip_port);
-
- spin = MIP_SPIN;
-
- while (((unsigned long long)mip_reg->off_38 &
- (unsigned long long)MIP_VALID) == 0) {
- if (--spin <= 0) {
- printk("es7000_mip_write: Timeout waiting for MIP Valid Flag");
- return -1;
- }
- es7000_spin(MIP_SPIN);
- }
-
- status = ((unsigned long long)mip_reg->off_0 &
- (unsigned long long)0xffff0000000000ULL) >> 48;
- mip_reg->off_38 = ((unsigned long long)mip_reg->off_38 &
- (unsigned long long)~MIP_VALID);
- return status;
-}
-
-int
-es7000_start_cpu(int cpu, unsigned long eip)
-{
- unsigned long vect = 0, psaival = 0;
-
- if (psai == NULL)
- return -1;
-
- vect = ((unsigned long)__pa(eip)/0x1000) << 16;
- psaival = (0x1000000 | vect | cpu);
-
- while (*psai & 0x1000000)
- ;
-
- *psai = psaival;
-
- return 0;
-
-}
-
-void __init
-es7000_sw_apic(void)
-{
- if (es7000_plat) {
- int mip_status;
- struct mip_reg es7000_mip_reg;
-
- printk("ES7000: Enabling APIC mode.\n");
- memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
- es7000_mip_reg.off_0 = MIP_SW_APIC;
- es7000_mip_reg.off_38 = (MIP_VALID);
- while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
- printk("es7000_sw_apic: command failed, status = %x\n",
- mip_status);
- return;
- }
-}
obj-$(CONFIG_X86_SUMMIT) += summit.o
obj-$(CONFIG_X86_BIGSMP) += bigsmp.o
obj-$(CONFIG_X86_ES7000) += es7000.o
-obj-$(CONFIG_X86_ES7000) += ../../x86/mach-es7000/
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
-#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <linux/kernel.h>
-#include <linux/smp.h>
#include <linux/init.h>
#include <linux/dmi.h>
-#include <asm/mach-bigsmp/mach_apic.h>
-#include <asm/mach-bigsmp/mach_apicdef.h>
-#include <asm/mach-bigsmp/mach_ipi.h>
+#include <asm/bigsmp/apicdef.h>
+#include <linux/smp.h>
+#include <asm/bigsmp/apic.h>
+#include <asm/bigsmp/ipi.h>
#include <asm/mach-default/mach_mpparse.h>
static int dmi_bigsmp; /* can be set by dmi scanners */
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
-#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/smp.h>
#include <linux/init.h>
-#include <asm/mach-es7000/mach_apicdef.h>
-#include <asm/mach-es7000/mach_apic.h>
-#include <asm/mach-es7000/mach_ipi.h>
-#include <asm/mach-es7000/mach_mpparse.h>
-#include <asm/mach-es7000/mach_wakecpu.h>
+#include <asm/es7000/apicdef.h>
+#include <linux/smp.h>
+#include <asm/es7000/apic.h>
+#include <asm/es7000/ipi.h>
+#include <asm/es7000/mpparse.h>
+#include <asm/es7000/wakecpu.h>
static int probe_es7000(void)
{
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
-#include <linux/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <asm/mach-numaq/mach_apic.h>
-#include <asm/mach-numaq/mach_apicdef.h>
-#include <asm/mach-numaq/mach_ipi.h>
-#include <asm/mach-numaq/mach_mpparse.h>
-#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq/apicdef.h>
+#include <linux/smp.h>
+#include <asm/numaq/apic.h>
+#include <asm/numaq/ipi.h>
+#include <asm/numaq/mpparse.h>
+#include <asm/numaq/wakecpu.h>
#include <asm/numaq.h>
static int mps_oem_check(struct mp_config_table *mpc, char *oem,
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
-#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/smp.h>
#include <linux/init.h>
-#include <asm/mach-summit/mach_apic.h>
-#include <asm/mach-summit/mach_apicdef.h>
-#include <asm/mach-summit/mach_ipi.h>
-#include <asm/mach-summit/mach_mpparse.h>
+#include <asm/summit/apicdef.h>
+#include <linux/smp.h>
+#include <asm/summit/apic.h>
+#include <asm/summit/ipi.h>
+#include <asm/summit/mpparse.h>
static int probe_summit(void)
{
int after_bootmem;
+unsigned long __supported_pte_mask __read_mostly = ~0UL;
+EXPORT_SYMBOL_GPL(__supported_pte_mask);
+
+static int do_not_nx __cpuinitdata;
+
+/*
+ * noexec=on|off
+ * Control non-executable mappings for 64-bit processes.
+ *
+ * on Enable (default)
+ * off Disable
+ */
+static int __init nonx_setup(char *str)
+{
+ if (!str)
+ return -EINVAL;
+ if (!strncmp(str, "on", 2)) {
+ __supported_pte_mask |= _PAGE_NX;
+ do_not_nx = 0;
+ } else if (!strncmp(str, "off", 3)) {
+ do_not_nx = 1;
+ __supported_pte_mask &= ~_PAGE_NX;
+ }
+ return 0;
+}
+early_param("noexec", nonx_setup);
+
+void __cpuinit check_efer(void)
+{
+ unsigned long efer;
+
+ rdmsrl(MSR_EFER, efer);
+ if (!(efer & EFER_NX) || do_not_nx)
+ __supported_pte_mask &= ~_PAGE_NX;
+}
+
+int force_personality32;
+
+/*
+ * noexec32=on|off
+ * Control non executable heap for 32bit processes.
+ * To control the stack too use noexec=off
+ *
+ * on PROT_READ does not imply PROT_EXEC for 32-bit processes (default)
+ * off PROT_READ implies PROT_EXEC
+ */
+static int __init nonx32_setup(char *str)
+{
+ if (!strcmp(str, "on"))
+ force_personality32 &= ~READ_IMPLIES_EXEC;
+ else if (!strcmp(str, "off"))
+ force_personality32 |= READ_IMPLIES_EXEC;
+ return 1;
+}
+__setup("noexec32=", nonx32_setup);
+
/*
* NOTE: This function is marked __ref because it calls __init function
* (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
acpi_pci_irq_enable(dev);
}
-#ifdef CONFIG_X86_IO_APIC
- if (acpi_ioapic)
- print_IO_APIC();
-#endif
-
return 0;
}
#include <linux/bootmem.h>
#include <asm/pat.h>
+#include <asm/e820.h>
#include "pci.h"
pcibios_allocate_bus_resources(&pci_root_buses);
pcibios_allocate_resources(0);
pcibios_allocate_resources(1);
+
+ e820_reserve_resources_late();
}
/**
return name != NULL;
}
-static void __init pci_mmcfg_insert_resources(unsigned long resource_flags)
+static void __init pci_mmcfg_insert_resources(void)
{
#define PCI_MMCFG_RESOURCE_NAME_LEN 19
int i;
cfg->pci_segment);
res->start = cfg->address;
res->end = res->start + (num_buses << 20) - 1;
- res->flags = IORESOURCE_MEM | resource_flags;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
insert_resource(&iomem_resource, res);
names += PCI_MMCFG_RESOURCE_NAME_LEN;
}
(pci_mmcfg_config[0].address == 0))
return;
- if (pci_mmcfg_arch_init()) {
- if (known_bridge)
- pci_mmcfg_insert_resources(IORESOURCE_BUSY);
+ if (pci_mmcfg_arch_init())
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
- } else {
+ else {
/*
* Signal not to attempt to insert mmcfg resources because
* the architecture mmcfg setup could not initialize.
* marked so it won't cause request errors when __request_region is
* called.
*/
- pci_mmcfg_insert_resources(0);
+ pci_mmcfg_insert_resources();
return 0;
}
#include <linux/suspend.h>
#include <asm/mtrr.h>
#include <asm/mce.h>
+#include <asm/xcr.h>
static struct saved_context saved_context;
if (boot_cpu_has(X86_FEATURE_SEP))
enable_sep_cpu();
+ /*
+ * restore XCR0 for xsave capable cpu's.
+ */
+ if (cpu_has_xsave)
+ xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+
fix_processor_context();
do_fpu_end();
mtrr_ap_init();
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/mtrr.h>
+#include <asm/xcr.h>
static void fix_processor_context(void);
wrmsrl(MSR_GS_BASE, ctxt->gs_base);
wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+ /*
+ * restore XCR0 for xsave capable cpu's.
+ */
+ if (cpu_has_xsave)
+ xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
+
fix_processor_context();
do_fpu_end();
#include <xen/hvc-console.h>
#include <asm/paravirt.h>
+#include <asm/apic.h>
#include <asm/page.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
}
#ifdef CONFIG_X86_LOCAL_APIC
-static u32 xen_apic_read(unsigned long reg)
+static u32 xen_apic_read(u32 reg)
{
return 0;
}
-static void xen_apic_write(unsigned long reg, u32 val)
+static void xen_apic_write(u32 reg, u32 val)
{
/* Warn to see if there's any stray references */
WARN_ON(1);
}
+
+static u64 xen_apic_icr_read(void)
+{
+ return 0;
+}
+
+static void xen_apic_icr_write(u32 low, u32 id)
+{
+ /* Warn to see if there's any stray references */
+ WARN_ON(1);
+}
+
+static void xen_apic_wait_icr_idle(void)
+{
+ return;
+}
+
+static u32 xen_safe_apic_wait_icr_idle(void)
+{
+ return 0;
+}
+
+static struct apic_ops xen_basic_apic_ops = {
+ .read = xen_apic_read,
+ .write = xen_apic_write,
+ .icr_read = xen_apic_icr_read,
+ .icr_write = xen_apic_icr_write,
+ .wait_icr_idle = xen_apic_wait_icr_idle,
+ .safe_wait_icr_idle = xen_safe_apic_wait_icr_idle,
+};
+
#endif
static void xen_flush_tlb(void)
static const struct pv_apic_ops xen_apic_ops __initdata = {
#ifdef CONFIG_X86_LOCAL_APIC
- .apic_write = xen_apic_write,
- .apic_read = xen_apic_read,
.setup_boot_clock = paravirt_nop,
.setup_secondary_clock = paravirt_nop,
.startup_ipi_hook = paravirt_nop,
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
+#ifdef CONFIG_X86_LOCAL_APIC
+ /*
+ * set up the basic apic ops.
+ */
+ apic_ops = &xen_basic_apic_ops;
+#endif
+
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
# Build Intel IOMMU support
obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
+obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
+
#
# Some architectures use the generic PCI setup functions
#
--- /dev/null
+#ifndef _DMA_REMAPPING_H
+#define _DMA_REMAPPING_H
+
+/*
+ * We need a fixed PAGE_SIZE of 4K irrespective of
+ * arch PAGE_SIZE for IOMMU page tables.
+ */
+#define PAGE_SHIFT_4K (12)
+#define PAGE_SIZE_4K (1UL << PAGE_SHIFT_4K)
+#define PAGE_MASK_4K (((u64)-1) << PAGE_SHIFT_4K)
+#define PAGE_ALIGN_4K(addr) (((addr) + PAGE_SIZE_4K - 1) & PAGE_MASK_4K)
+
+#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT_4K)
+#define DMA_32BIT_PFN IOVA_PFN(DMA_32BIT_MASK)
+#define DMA_64BIT_PFN IOVA_PFN(DMA_64BIT_MASK)
+
+
+/*
+ * 0: Present
+ * 1-11: Reserved
+ * 12-63: Context Ptr (12 - (haw-1))
+ * 64-127: Reserved
+ */
+struct root_entry {
+ u64 val;
+ u64 rsvd1;
+};
+#define ROOT_ENTRY_NR (PAGE_SIZE_4K/sizeof(struct root_entry))
+static inline bool root_present(struct root_entry *root)
+{
+ return (root->val & 1);
+}
+static inline void set_root_present(struct root_entry *root)
+{
+ root->val |= 1;
+}
+static inline void set_root_value(struct root_entry *root, unsigned long value)
+{
+ root->val |= value & PAGE_MASK_4K;
+}
+
+struct context_entry;
+static inline struct context_entry *
+get_context_addr_from_root(struct root_entry *root)
+{
+ return (struct context_entry *)
+ (root_present(root)?phys_to_virt(
+ root->val & PAGE_MASK_4K):
+ NULL);
+}
+
+/*
+ * low 64 bits:
+ * 0: present
+ * 1: fault processing disable
+ * 2-3: translation type
+ * 12-63: address space root
+ * high 64 bits:
+ * 0-2: address width
+ * 3-6: aval
+ * 8-23: domain id
+ */
+struct context_entry {
+ u64 lo;
+ u64 hi;
+};
+#define context_present(c) ((c).lo & 1)
+#define context_fault_disable(c) (((c).lo >> 1) & 1)
+#define context_translation_type(c) (((c).lo >> 2) & 3)
+#define context_address_root(c) ((c).lo & PAGE_MASK_4K)
+#define context_address_width(c) ((c).hi & 7)
+#define context_domain_id(c) (((c).hi >> 8) & ((1 << 16) - 1))
+
+#define context_set_present(c) do {(c).lo |= 1;} while (0)
+#define context_set_fault_enable(c) \
+ do {(c).lo &= (((u64)-1) << 2) | 1;} while (0)
+#define context_set_translation_type(c, val) \
+ do { \
+ (c).lo &= (((u64)-1) << 4) | 3; \
+ (c).lo |= ((val) & 3) << 2; \
+ } while (0)
+#define CONTEXT_TT_MULTI_LEVEL 0
+#define context_set_address_root(c, val) \
+ do {(c).lo |= (val) & PAGE_MASK_4K;} while (0)
+#define context_set_address_width(c, val) do {(c).hi |= (val) & 7;} while (0)
+#define context_set_domain_id(c, val) \
+ do {(c).hi |= ((val) & ((1 << 16) - 1)) << 8;} while (0)
+#define context_clear_entry(c) do {(c).lo = 0; (c).hi = 0;} while (0)
+
+/*
+ * 0: readable
+ * 1: writable
+ * 2-6: reserved
+ * 7: super page
+ * 8-11: available
+ * 12-63: Host physcial address
+ */
+struct dma_pte {
+ u64 val;
+};
+#define dma_clear_pte(p) do {(p).val = 0;} while (0)
+
+#define DMA_PTE_READ (1)
+#define DMA_PTE_WRITE (2)
+
+#define dma_set_pte_readable(p) do {(p).val |= DMA_PTE_READ;} while (0)
+#define dma_set_pte_writable(p) do {(p).val |= DMA_PTE_WRITE;} while (0)
+#define dma_set_pte_prot(p, prot) \
+ do {(p).val = ((p).val & ~3) | ((prot) & 3); } while (0)
+#define dma_pte_addr(p) ((p).val & PAGE_MASK_4K)
+#define dma_set_pte_addr(p, addr) do {\
+ (p).val |= ((addr) & PAGE_MASK_4K); } while (0)
+#define dma_pte_present(p) (((p).val & 3) != 0)
+
+struct intel_iommu;
+
+struct dmar_domain {
+ int id; /* domain id */
+ struct intel_iommu *iommu; /* back pointer to owning iommu */
+
+ struct list_head devices; /* all devices' list */
+ struct iova_domain iovad; /* iova's that belong to this domain */
+
+ struct dma_pte *pgd; /* virtual address */
+ spinlock_t mapping_lock; /* page table lock */
+ int gaw; /* max guest address width */
+
+ /* adjusted guest address width, 0 is level 2 30-bit */
+ int agaw;
+
+#define DOMAIN_FLAG_MULTIPLE_DEVICES 1
+ int flags;
+};
+
+/* PCI domain-device relationship */
+struct device_domain_info {
+ struct list_head link; /* link to domain siblings */
+ struct list_head global; /* link to global list */
+ u8 bus; /* PCI bus numer */
+ u8 devfn; /* PCI devfn number */
+ struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
+ struct dmar_domain *domain; /* pointer to domain */
+};
+
+extern int init_dmars(void);
+extern void free_dmar_iommu(struct intel_iommu *iommu);
+
+extern int dmar_disabled;
+
+#ifndef CONFIG_DMAR_GFX_WA
+static inline void iommu_prepare_gfx_mapping(void)
+{
+ return;
+}
+#endif /* !CONFIG_DMAR_GFX_WA */
+
+#endif
* Author: Shaohua Li <shaohua.li@intel.com>
* Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
*
- * This file implements early detection/parsing of DMA Remapping Devices
+ * This file implements early detection/parsing of Remapping Devices
* reported to OS through BIOS via DMA remapping reporting (DMAR) ACPI
* tables.
+ *
+ * These routines are used by both DMA-remapping and Interrupt-remapping
*/
#include <linux/pci.h>
#include <linux/dmar.h>
+#include <linux/timer.h>
#include "iova.h"
#include "intel-iommu.h"
* these units are not supported by the architecture.
*/
LIST_HEAD(dmar_drhd_units);
-LIST_HEAD(dmar_rmrr_units);
static struct acpi_table_header * __initdata dmar_tbl;
list_add(&drhd->list, &dmar_drhd_units);
}
-static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
-{
- list_add(&rmrr->list, &dmar_rmrr_units);
-}
-
static int __init dmar_parse_one_dev_scope(struct acpi_dmar_device_scope *scope,
struct pci_dev **dev, u16 segment)
{
struct acpi_dmar_hardware_unit *drhd;
struct dmar_drhd_unit *dmaru;
int ret = 0;
- static int include_all;
dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
if (!dmaru)
return -ENOMEM;
+ dmaru->hdr = header;
drhd = (struct acpi_dmar_hardware_unit *)header;
dmaru->reg_base_addr = drhd->address;
dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */
+ ret = alloc_iommu(dmaru);
+ if (ret) {
+ kfree(dmaru);
+ return ret;
+ }
+ dmar_register_drhd_unit(dmaru);
+ return 0;
+}
+
+static int __init
+dmar_parse_dev(struct dmar_drhd_unit *dmaru)
+{
+ struct acpi_dmar_hardware_unit *drhd;
+ static int include_all;
+ int ret;
+
+ drhd = (struct acpi_dmar_hardware_unit *) dmaru->hdr;
+
if (!dmaru->include_all)
ret = dmar_parse_dev_scope((void *)(drhd + 1),
- ((void *)drhd) + header->length,
+ ((void *)drhd) + drhd->header.length,
&dmaru->devices_cnt, &dmaru->devices,
drhd->segment);
else {
include_all = 1;
}
- if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all))
+ if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all)) {
+ list_del(&dmaru->list);
kfree(dmaru);
- else
- dmar_register_drhd_unit(dmaru);
+ }
return ret;
}
+#ifdef CONFIG_DMAR
+LIST_HEAD(dmar_rmrr_units);
+
+static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
+{
+ list_add(&rmrr->list, &dmar_rmrr_units);
+}
+
+
static int __init
dmar_parse_one_rmrr(struct acpi_dmar_header *header)
{
struct acpi_dmar_reserved_memory *rmrr;
struct dmar_rmrr_unit *rmrru;
- int ret = 0;
rmrru = kzalloc(sizeof(*rmrru), GFP_KERNEL);
if (!rmrru)
return -ENOMEM;
+ rmrru->hdr = header;
rmrr = (struct acpi_dmar_reserved_memory *)header;
rmrru->base_address = rmrr->base_address;
rmrru->end_address = rmrr->end_address;
+
+ dmar_register_rmrr_unit(rmrru);
+ return 0;
+}
+
+static int __init
+rmrr_parse_dev(struct dmar_rmrr_unit *rmrru)
+{
+ struct acpi_dmar_reserved_memory *rmrr;
+ int ret;
+
+ rmrr = (struct acpi_dmar_reserved_memory *) rmrru->hdr;
ret = dmar_parse_dev_scope((void *)(rmrr + 1),
- ((void *)rmrr) + header->length,
+ ((void *)rmrr) + rmrr->header.length,
&rmrru->devices_cnt, &rmrru->devices, rmrr->segment);
- if (ret || (rmrru->devices_cnt == 0))
+ if (ret || (rmrru->devices_cnt == 0)) {
+ list_del(&rmrru->list);
kfree(rmrru);
- else
- dmar_register_rmrr_unit(rmrru);
+ }
return ret;
}
+#endif
static void __init
dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
}
}
+
/**
* parse_dmar_table - parses the DMA reporting table
*/
ret = dmar_parse_one_drhd(entry_header);
break;
case ACPI_DMAR_TYPE_RESERVED_MEMORY:
+#ifdef CONFIG_DMAR
ret = dmar_parse_one_rmrr(entry_header);
+#endif
break;
default:
printk(KERN_WARNING PREFIX
return ret;
}
+int dmar_pci_device_match(struct pci_dev *devices[], int cnt,
+ struct pci_dev *dev)
+{
+ int index;
+
+ while (dev) {
+ for (index = 0; index < cnt; index++)
+ if (dev == devices[index])
+ return 1;
-int __init dmar_table_init(void)
+ /* Check our parent */
+ dev = dev->bus->self;
+ }
+
+ return 0;
+}
+
+struct dmar_drhd_unit *
+dmar_find_matched_drhd_unit(struct pci_dev *dev)
{
+ struct dmar_drhd_unit *drhd = NULL;
+
+ list_for_each_entry(drhd, &dmar_drhd_units, list) {
+ if (drhd->include_all || dmar_pci_device_match(drhd->devices,
+ drhd->devices_cnt, dev))
+ return drhd;
+ }
+
+ return NULL;
+}
+
+int __init dmar_dev_scope_init(void)
+{
+ struct dmar_drhd_unit *drhd;
+ int ret = -ENODEV;
+
+ for_each_drhd_unit(drhd) {
+ ret = dmar_parse_dev(drhd);
+ if (ret)
+ return ret;
+ }
+
+#ifdef CONFIG_DMAR
+ {
+ struct dmar_rmrr_unit *rmrr;
+ for_each_rmrr_units(rmrr) {
+ ret = rmrr_parse_dev(rmrr);
+ if (ret)
+ return ret;
+ }
+ }
+#endif
+
+ return ret;
+}
+
+int __init dmar_table_init(void)
+{
+ static int dmar_table_initialized;
int ret;
+ if (dmar_table_initialized)
+ return 0;
+
+ dmar_table_initialized = 1;
+
ret = parse_dmar_table();
if (ret) {
- printk(KERN_INFO PREFIX "parse DMAR table failure.\n");
+ if (ret != -ENODEV)
+ printk(KERN_INFO PREFIX "parse DMAR table failure.\n");
return ret;
}
return -ENODEV;
}
+#ifdef CONFIG_DMAR
if (list_empty(&dmar_rmrr_units))
printk(KERN_INFO PREFIX "No RMRR found\n");
+#endif
+#ifdef CONFIG_INTR_REMAP
+ parse_ioapics_under_ir();
+#endif
return 0;
}
return (ACPI_SUCCESS(status) ? 1 : 0);
}
+
+void __init detect_intel_iommu(void)
+{
+ int ret;
+
+ ret = early_dmar_detect();
+
+#ifdef CONFIG_DMAR
+ {
+ struct acpi_table_dmar *dmar;
+ /*
+ * for now we will disable dma-remapping when interrupt
+ * remapping is enabled.
+ * When support for queued invalidation for IOTLB invalidation
+ * is added, we will not need this any more.
+ */
+ dmar = (struct acpi_table_dmar *) dmar_tbl;
+ if (ret && cpu_has_x2apic && dmar->flags & 0x1) {
+ printk(KERN_INFO
+ "Queued invalidation will be enabled to support "
+ "x2apic and Intr-remapping.\n");
+ printk(KERN_INFO
+ "Disabling IOMMU detection, because of missing "
+ "queued invalidation support for IOTLB "
+ "invalidation\n");
+ printk(KERN_INFO
+ "Use \"nox2apic\", if you want to use Intel "
+ " IOMMU for DMA-remapping and don't care about "
+ " x2apic support\n");
+
+ dmar_disabled = 1;
+ return;
+ }
+
+ if (ret && !no_iommu && !iommu_detected && !swiotlb &&
+ !dmar_disabled)
+ iommu_detected = 1;
+ }
+#endif
+}
+
+
+int alloc_iommu(struct dmar_drhd_unit *drhd)
+{
+ struct intel_iommu *iommu;
+ int map_size;
+ u32 ver;
+ static int iommu_allocated = 0;
+
+ iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
+ if (!iommu)
+ return -ENOMEM;
+
+ iommu->seq_id = iommu_allocated++;
+
+ iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K);
+ if (!iommu->reg) {
+ printk(KERN_ERR "IOMMU: can't map the region\n");
+ goto error;
+ }
+ iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
+ iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
+
+ /* the registers might be more than one page */
+ map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
+ cap_max_fault_reg_offset(iommu->cap));
+ map_size = PAGE_ALIGN_4K(map_size);
+ if (map_size > PAGE_SIZE_4K) {
+ iounmap(iommu->reg);
+ iommu->reg = ioremap(drhd->reg_base_addr, map_size);
+ if (!iommu->reg) {
+ printk(KERN_ERR "IOMMU: can't map the region\n");
+ goto error;
+ }
+ }
+
+ ver = readl(iommu->reg + DMAR_VER_REG);
+ pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n",
+ drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
+ iommu->cap, iommu->ecap);
+
+ spin_lock_init(&iommu->register_lock);
+
+ drhd->iommu = iommu;
+ return 0;
+error:
+ kfree(iommu);
+ return -1;
+}
+
+void free_iommu(struct intel_iommu *iommu)
+{
+ if (!iommu)
+ return;
+
+#ifdef CONFIG_DMAR
+ free_dmar_iommu(iommu);
+#endif
+
+ if (iommu->reg)
+ iounmap(iommu->reg);
+ kfree(iommu);
+}
+
+/*
+ * Reclaim all the submitted descriptors which have completed its work.
+ */
+static inline void reclaim_free_desc(struct q_inval *qi)
+{
+ while (qi->desc_status[qi->free_tail] == QI_DONE) {
+ qi->desc_status[qi->free_tail] = QI_FREE;
+ qi->free_tail = (qi->free_tail + 1) % QI_LENGTH;
+ qi->free_cnt++;
+ }
+}
+
+/*
+ * Submit the queued invalidation descriptor to the remapping
+ * hardware unit and wait for its completion.
+ */
+void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
+{
+ struct q_inval *qi = iommu->qi;
+ struct qi_desc *hw, wait_desc;
+ int wait_index, index;
+ unsigned long flags;
+
+ if (!qi)
+ return;
+
+ hw = qi->desc;
+
+ spin_lock(&qi->q_lock);
+ while (qi->free_cnt < 3) {
+ spin_unlock(&qi->q_lock);
+ cpu_relax();
+ spin_lock(&qi->q_lock);
+ }
+
+ index = qi->free_head;
+ wait_index = (index + 1) % QI_LENGTH;
+
+ qi->desc_status[index] = qi->desc_status[wait_index] = QI_IN_USE;
+
+ hw[index] = *desc;
+
+ wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
+ wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]);
+
+ hw[wait_index] = wait_desc;
+
+ __iommu_flush_cache(iommu, &hw[index], sizeof(struct qi_desc));
+ __iommu_flush_cache(iommu, &hw[wait_index], sizeof(struct qi_desc));
+
+ qi->free_head = (qi->free_head + 2) % QI_LENGTH;
+ qi->free_cnt -= 2;
+
+ spin_lock_irqsave(&iommu->register_lock, flags);
+ /*
+ * update the HW tail register indicating the presence of
+ * new descriptors.
+ */
+ writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
+ spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+ while (qi->desc_status[wait_index] != QI_DONE) {
+ spin_unlock(&qi->q_lock);
+ cpu_relax();
+ spin_lock(&qi->q_lock);
+ }
+
+ qi->desc_status[index] = QI_DONE;
+
+ reclaim_free_desc(qi);
+ spin_unlock(&qi->q_lock);
+}
+
+/*
+ * Flush the global interrupt entry cache.
+ */
+void qi_global_iec(struct intel_iommu *iommu)
+{
+ struct qi_desc desc;
+
+ desc.low = QI_IEC_TYPE;
+ desc.high = 0;
+
+ qi_submit_sync(&desc, iommu);
+}
+
+/*
+ * Enable Queued Invalidation interface. This is a must to support
+ * interrupt-remapping. Also used by DMA-remapping, which replaces
+ * register based IOTLB invalidation.
+ */
+int dmar_enable_qi(struct intel_iommu *iommu)
+{
+ u32 cmd, sts;
+ unsigned long flags;
+ struct q_inval *qi;
+
+ if (!ecap_qis(iommu->ecap))
+ return -ENOENT;
+
+ /*
+ * queued invalidation is already setup and enabled.
+ */
+ if (iommu->qi)
+ return 0;
+
+ iommu->qi = kmalloc(sizeof(*qi), GFP_KERNEL);
+ if (!iommu->qi)
+ return -ENOMEM;
+
+ qi = iommu->qi;
+
+ qi->desc = (void *)(get_zeroed_page(GFP_KERNEL));
+ if (!qi->desc) {
+ kfree(qi);
+ iommu->qi = 0;
+ return -ENOMEM;
+ }
+
+ qi->desc_status = kmalloc(QI_LENGTH * sizeof(int), GFP_KERNEL);
+ if (!qi->desc_status) {
+ free_page((unsigned long) qi->desc);
+ kfree(qi);
+ iommu->qi = 0;
+ return -ENOMEM;
+ }
+
+ qi->free_head = qi->free_tail = 0;
+ qi->free_cnt = QI_LENGTH;
+
+ spin_lock_init(&qi->q_lock);
+
+ spin_lock_irqsave(&iommu->register_lock, flags);
+ /* write zero to the tail reg */
+ writel(0, iommu->reg + DMAR_IQT_REG);
+
+ dmar_writeq(iommu->reg + DMAR_IQA_REG, virt_to_phys(qi->desc));
+
+ cmd = iommu->gcmd | DMA_GCMD_QIE;
+ iommu->gcmd |= DMA_GCMD_QIE;
+ writel(cmd, iommu->reg + DMAR_GCMD_REG);
+
+ /* Make sure hardware complete it */
+ IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, readl, (sts & DMA_GSTS_QIES), sts);
+ spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+ return 0;
+}
#define DEFAULT_DOMAIN_ADDRESS_WIDTH 48
-#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
-
#define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
DEFINE_TIMER(unmap_timer, flush_unmaps_timeout, 0, 0);
-static struct intel_iommu *g_iommus;
-
#define HIGH_WATER_MARK 250
struct deferred_flush_tables {
int next;
kmem_cache_free(iommu_iova_cache, iova);
}
-static inline void __iommu_flush_cache(
- struct intel_iommu *iommu, void *addr, int size)
-{
- if (!ecap_coherent(iommu->ecap))
- clflush_cache_range(addr, size);
-}
-
/* Gets context entry for a given bus and devfn */
static struct context_entry * device_to_context_entry(struct intel_iommu *iommu,
u8 bus, u8 devfn)
return 0;
}
-#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
-{\
- cycles_t start_time = get_cycles();\
- while (1) {\
- sts = op (iommu->reg + offset);\
- if (cond)\
- break;\
- if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
- panic("DMAR hardware is malfunctioning\n");\
- cpu_relax();\
- }\
-}
-
static void iommu_set_root_entry(struct intel_iommu *iommu)
{
void *addr;
return -ENOMEM;
}
+ spin_lock_init(&iommu->lock);
+
/*
* if Caching mode is set, then invalid translations are tagged
* with domainid 0. Hence we need to pre-allocate it.
set_bit(0, iommu->domain_ids);
return 0;
}
-static struct intel_iommu *alloc_iommu(struct intel_iommu *iommu,
- struct dmar_drhd_unit *drhd)
-{
- int ret;
- int map_size;
- u32 ver;
-
- iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K);
- if (!iommu->reg) {
- printk(KERN_ERR "IOMMU: can't map the region\n");
- goto error;
- }
- iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
- iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
-
- /* the registers might be more than one page */
- map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
- cap_max_fault_reg_offset(iommu->cap));
- map_size = PAGE_ALIGN_4K(map_size);
- if (map_size > PAGE_SIZE_4K) {
- iounmap(iommu->reg);
- iommu->reg = ioremap(drhd->reg_base_addr, map_size);
- if (!iommu->reg) {
- printk(KERN_ERR "IOMMU: can't map the region\n");
- goto error;
- }
- }
-
- ver = readl(iommu->reg + DMAR_VER_REG);
- pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n",
- drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
- iommu->cap, iommu->ecap);
- ret = iommu_init_domains(iommu);
- if (ret)
- goto error_unmap;
- spin_lock_init(&iommu->lock);
- spin_lock_init(&iommu->register_lock);
- drhd->iommu = iommu;
- return iommu;
-error_unmap:
- iounmap(iommu->reg);
-error:
- kfree(iommu);
- return NULL;
-}
static void domain_exit(struct dmar_domain *domain);
-static void free_iommu(struct intel_iommu *iommu)
+
+void free_dmar_iommu(struct intel_iommu *iommu)
{
struct dmar_domain *domain;
int i;
- if (!iommu)
- return;
-
i = find_first_bit(iommu->domain_ids, cap_ndoms(iommu->cap));
for (; i < cap_ndoms(iommu->cap); ) {
domain = iommu->domains[i];
/* free context mapping */
free_context_table(iommu);
-
- if (iommu->reg)
- iounmap(iommu->reg);
- kfree(iommu);
}
static struct dmar_domain * iommu_alloc_domain(struct intel_iommu *iommu)
return NULL;
}
-static int dmar_pci_device_match(struct pci_dev *devices[], int cnt,
- struct pci_dev *dev)
-{
- int index;
-
- while (dev) {
- for (index = 0; index < cnt; index++)
- if (dev == devices[index])
- return 1;
-
- /* Check our parent */
- dev = dev->bus->self;
- }
-
- return 0;
-}
-
-static struct dmar_drhd_unit *
-dmar_find_matched_drhd_unit(struct pci_dev *dev)
-{
- struct dmar_drhd_unit *drhd = NULL;
-
- list_for_each_entry(drhd, &dmar_drhd_units, list) {
- if (drhd->include_all || dmar_pci_device_match(drhd->devices,
- drhd->devices_cnt, dev))
- return drhd;
- }
-
- return NULL;
-}
-
/* domain is initialized */
static struct dmar_domain *get_domain_for_dev(struct pci_dev *pdev, int gaw)
{
* endfor
*/
for_each_drhd_unit(drhd) {
- if (drhd->ignored)
- continue;
g_num_of_iommus++;
/*
* lock not needed as this is only incremented in the single
*/
}
- g_iommus = kzalloc(g_num_of_iommus * sizeof(*iommu), GFP_KERNEL);
- if (!g_iommus) {
- ret = -ENOMEM;
- goto error;
- }
-
deferred_flush = kzalloc(g_num_of_iommus *
sizeof(struct deferred_flush_tables), GFP_KERNEL);
if (!deferred_flush) {
goto error;
}
- i = 0;
for_each_drhd_unit(drhd) {
if (drhd->ignored)
continue;
- iommu = alloc_iommu(&g_iommus[i], drhd);
- i++;
- if (!iommu) {
- ret = -ENOMEM;
+
+ iommu = drhd->iommu;
+
+ ret = iommu_init_domains(iommu);
+ if (ret)
goto error;
- }
/*
* TBD:
iommu = drhd->iommu;
free_iommu(iommu);
}
- kfree(g_iommus);
return ret;
}
/* just flush them all */
for (i = 0; i < g_num_of_iommus; i++) {
if (deferred_flush[i].next) {
- iommu_flush_iotlb_global(&g_iommus[i], 0);
+ struct intel_iommu *iommu =
+ deferred_flush[i].domain[0]->iommu;
+
+ iommu_flush_iotlb_global(iommu, 0);
for (j = 0; j < deferred_flush[i].next; j++) {
__free_iova(&deferred_flush[i].domain[j]->iovad,
deferred_flush[i].iova[j]);
if (list_size == HIGH_WATER_MARK)
flush_unmaps();
- iommu_id = dom->iommu - g_iommus;
+ iommu_id = dom->iommu->seq_id;
+
next = deferred_flush[iommu_id].next;
deferred_flush[iommu_id].domain[next] = dom;
deferred_flush[iommu_id].iova[next] = iova;
}
-static int blacklist_iommu(const struct dmi_system_id *id)
-{
- printk(KERN_INFO "%s detected; disabling IOMMU\n",
- id->ident);
- dmar_disabled = 1;
- return 0;
-}
-
-static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
- { /* Some DG33BU BIOS revisions advertised non-existent VT-d */
- .callback = blacklist_iommu,
- .ident = "Intel DG33BU",
- { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
- DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
- }
- },
- { }
-};
-
-
-void __init detect_intel_iommu(void)
-{
- if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
- return;
- if (early_dmar_detect()) {
- dmi_check_system(intel_iommu_dmi_table);
- if (dmar_disabled)
- return;
- iommu_detected = 1;
- }
-}
-
static void __init init_no_remapping_devices(void)
{
struct dmar_drhd_unit *drhd;
{
int ret = 0;
- if (no_iommu || swiotlb || dmar_disabled)
- return -ENODEV;
-
if (dmar_table_init())
return -ENODEV;
+ if (dmar_dev_scope_init())
+ return -ENODEV;
+
+ /*
+ * Check the need for DMA-remapping initialization now.
+ * Above initialization will also be used by Interrupt-remapping.
+ */
+ if (no_iommu || swiotlb || dmar_disabled)
+ return -ENODEV;
+
iommu_init_mempool();
dmar_init_reserved_ranges();
#include <linux/sysdev.h>
#include "iova.h"
#include <linux/io.h>
-
-/*
- * We need a fixed PAGE_SIZE of 4K irrespective of
- * arch PAGE_SIZE for IOMMU page tables.
- */
-#define PAGE_SHIFT_4K (12)
-#define PAGE_SIZE_4K (1UL << PAGE_SHIFT_4K)
-#define PAGE_MASK_4K (((u64)-1) << PAGE_SHIFT_4K)
-#define PAGE_ALIGN_4K(addr) (((addr) + PAGE_SIZE_4K - 1) & PAGE_MASK_4K)
-
-#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT_4K)
-#define DMA_32BIT_PFN IOVA_PFN(DMA_32BIT_MASK)
-#define DMA_64BIT_PFN IOVA_PFN(DMA_64BIT_MASK)
+#include <asm/cacheflush.h>
+#include "dma_remapping.h"
/*
* Intel IOMMU register specification per version 1.0 public spec.
#define DMAR_PLMLIMIT_REG 0x6c /* PMRR low limit */
#define DMAR_PHMBASE_REG 0x70 /* pmrr high base addr */
#define DMAR_PHMLIMIT_REG 0x78 /* pmrr high limit */
+#define DMAR_IQH_REG 0x80 /* Invalidation queue head register */
+#define DMAR_IQT_REG 0x88 /* Invalidation queue tail register */
+#define DMAR_IQA_REG 0x90 /* Invalidation queue addr register */
+#define DMAR_ICS_REG 0x98 /* Invalidation complete status register */
+#define DMAR_IRTA_REG 0xb8 /* Interrupt remapping table addr register */
#define OFFSET_STRIDE (9)
/*
#define ecap_max_iotlb_offset(e) \
(ecap_iotlb_offset(e) + ecap_niotlb_iunits(e) * 16)
#define ecap_coherent(e) ((e) & 0x1)
+#define ecap_qis(e) ((e) & 0x2)
+#define ecap_eim_support(e) ((e >> 4) & 0x1)
+#define ecap_ir_support(e) ((e >> 3) & 0x1)
+#define ecap_max_handle_mask(e) ((e >> 20) & 0xf)
/* IOTLB_REG */
#define DMA_TLB_IH_NONLEAF (((u64)1) << 6)
#define DMA_TLB_MAX_SIZE (0x3f)
+/* INVALID_DESC */
+#define DMA_ID_TLB_GLOBAL_FLUSH (((u64)1) << 3)
+#define DMA_ID_TLB_DSI_FLUSH (((u64)2) << 3)
+#define DMA_ID_TLB_PSI_FLUSH (((u64)3) << 3)
+#define DMA_ID_TLB_READ_DRAIN (((u64)1) << 7)
+#define DMA_ID_TLB_WRITE_DRAIN (((u64)1) << 6)
+#define DMA_ID_TLB_DID(id) (((u64)((id & 0xffff) << 16)))
+#define DMA_ID_TLB_IH_NONLEAF (((u64)1) << 6)
+#define DMA_ID_TLB_ADDR(addr) (addr)
+#define DMA_ID_TLB_ADDR_MASK(mask) (mask)
+
/* PMEN_REG */
#define DMA_PMEN_EPM (((u32)1)<<31)
#define DMA_PMEN_PRS (((u32)1)<<0)
#define DMA_GCMD_SFL (((u32)1) << 29)
#define DMA_GCMD_EAFL (((u32)1) << 28)
#define DMA_GCMD_WBF (((u32)1) << 27)
+#define DMA_GCMD_QIE (((u32)1) << 26)
+#define DMA_GCMD_SIRTP (((u32)1) << 24)
+#define DMA_GCMD_IRE (((u32) 1) << 25)
/* GSTS_REG */
#define DMA_GSTS_TES (((u32)1) << 31)
#define DMA_GSTS_FLS (((u32)1) << 29)
#define DMA_GSTS_AFLS (((u32)1) << 28)
#define DMA_GSTS_WBFS (((u32)1) << 27)
+#define DMA_GSTS_QIES (((u32)1) << 26)
+#define DMA_GSTS_IRTPS (((u32)1) << 24)
+#define DMA_GSTS_IRES (((u32)1) << 25)
/* CCMD_REG */
#define DMA_CCMD_ICC (((u64)1) << 63)
#define dma_frcd_source_id(c) (c & 0xffff)
#define dma_frcd_page_addr(d) (d & (((u64)-1) << 12)) /* low 64 bit */
-/*
- * 0: Present
- * 1-11: Reserved
- * 12-63: Context Ptr (12 - (haw-1))
- * 64-127: Reserved
- */
-struct root_entry {
- u64 val;
- u64 rsvd1;
-};
-#define ROOT_ENTRY_NR (PAGE_SIZE_4K/sizeof(struct root_entry))
-static inline bool root_present(struct root_entry *root)
-{
- return (root->val & 1);
-}
-static inline void set_root_present(struct root_entry *root)
-{
- root->val |= 1;
-}
-static inline void set_root_value(struct root_entry *root, unsigned long value)
-{
- root->val |= value & PAGE_MASK_4K;
+#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
+
+#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
+{\
+ cycles_t start_time = get_cycles();\
+ while (1) {\
+ sts = op (iommu->reg + offset);\
+ if (cond)\
+ break;\
+ if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
+ panic("DMAR hardware is malfunctioning\n");\
+ cpu_relax();\
+ }\
}
-struct context_entry;
-static inline struct context_entry *
-get_context_addr_from_root(struct root_entry *root)
-{
- return (struct context_entry *)
- (root_present(root)?phys_to_virt(
- root->val & PAGE_MASK_4K):
- NULL);
-}
-
-/*
- * low 64 bits:
- * 0: present
- * 1: fault processing disable
- * 2-3: translation type
- * 12-63: address space root
- * high 64 bits:
- * 0-2: address width
- * 3-6: aval
- * 8-23: domain id
- */
-struct context_entry {
- u64 lo;
- u64 hi;
-};
-#define context_present(c) ((c).lo & 1)
-#define context_fault_disable(c) (((c).lo >> 1) & 1)
-#define context_translation_type(c) (((c).lo >> 2) & 3)
-#define context_address_root(c) ((c).lo & PAGE_MASK_4K)
-#define context_address_width(c) ((c).hi & 7)
-#define context_domain_id(c) (((c).hi >> 8) & ((1 << 16) - 1))
-
-#define context_set_present(c) do {(c).lo |= 1;} while (0)
-#define context_set_fault_enable(c) \
- do {(c).lo &= (((u64)-1) << 2) | 1;} while (0)
-#define context_set_translation_type(c, val) \
- do { \
- (c).lo &= (((u64)-1) << 4) | 3; \
- (c).lo |= ((val) & 3) << 2; \
- } while (0)
-#define CONTEXT_TT_MULTI_LEVEL 0
-#define context_set_address_root(c, val) \
- do {(c).lo |= (val) & PAGE_MASK_4K;} while (0)
-#define context_set_address_width(c, val) do {(c).hi |= (val) & 7;} while (0)
-#define context_set_domain_id(c, val) \
- do {(c).hi |= ((val) & ((1 << 16) - 1)) << 8;} while (0)
-#define context_clear_entry(c) do {(c).lo = 0; (c).hi = 0;} while (0)
+#define QI_LENGTH 256 /* queue length */
-/*
- * 0: readable
- * 1: writable
- * 2-6: reserved
- * 7: super page
- * 8-11: available
- * 12-63: Host physcial address
- */
-struct dma_pte {
- u64 val;
+enum {
+ QI_FREE,
+ QI_IN_USE,
+ QI_DONE
};
-#define dma_clear_pte(p) do {(p).val = 0;} while (0)
-
-#define DMA_PTE_READ (1)
-#define DMA_PTE_WRITE (2)
-#define dma_set_pte_readable(p) do {(p).val |= DMA_PTE_READ;} while (0)
-#define dma_set_pte_writable(p) do {(p).val |= DMA_PTE_WRITE;} while (0)
-#define dma_set_pte_prot(p, prot) \
- do {(p).val = ((p).val & ~3) | ((prot) & 3); } while (0)
-#define dma_pte_addr(p) ((p).val & PAGE_MASK_4K)
-#define dma_set_pte_addr(p, addr) do {\
- (p).val |= ((addr) & PAGE_MASK_4K); } while (0)
-#define dma_pte_present(p) (((p).val & 3) != 0)
+#define QI_CC_TYPE 0x1
+#define QI_IOTLB_TYPE 0x2
+#define QI_DIOTLB_TYPE 0x3
+#define QI_IEC_TYPE 0x4
+#define QI_IWD_TYPE 0x5
-struct intel_iommu;
+#define QI_IEC_SELECTIVE (((u64)1) << 4)
+#define QI_IEC_IIDEX(idx) (((u64)(idx & 0xffff) << 32))
+#define QI_IEC_IM(m) (((u64)(m & 0x1f) << 27))
-struct dmar_domain {
- int id; /* domain id */
- struct intel_iommu *iommu; /* back pointer to owning iommu */
+#define QI_IWD_STATUS_DATA(d) (((u64)d) << 32)
+#define QI_IWD_STATUS_WRITE (((u64)1) << 5)
- struct list_head devices; /* all devices' list */
- struct iova_domain iovad; /* iova's that belong to this domain */
+struct qi_desc {
+ u64 low, high;
+};
- struct dma_pte *pgd; /* virtual address */
- spinlock_t mapping_lock; /* page table lock */
- int gaw; /* max guest address width */
+struct q_inval {
+ spinlock_t q_lock;
+ struct qi_desc *desc; /* invalidation queue */
+ int *desc_status; /* desc status */
+ int free_head; /* first free entry */
+ int free_tail; /* last free entry */
+ int free_cnt;
+};
- /* adjusted guest address width, 0 is level 2 30-bit */
- int agaw;
+#ifdef CONFIG_INTR_REMAP
+/* 1MB - maximum possible interrupt remapping table size */
+#define INTR_REMAP_PAGE_ORDER 8
+#define INTR_REMAP_TABLE_REG_SIZE 0xf
-#define DOMAIN_FLAG_MULTIPLE_DEVICES 1
- int flags;
-};
+#define INTR_REMAP_TABLE_ENTRIES 65536
-/* PCI domain-device relationship */
-struct device_domain_info {
- struct list_head link; /* link to domain siblings */
- struct list_head global; /* link to global list */
- u8 bus; /* PCI bus numer */
- u8 devfn; /* PCI devfn number */
- struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */
- struct dmar_domain *domain; /* pointer to domain */
+struct ir_table {
+ struct irte *base;
};
-
-extern int init_dmars(void);
+#endif
struct intel_iommu {
void __iomem *reg; /* Pointer to hardware regs, virtual addr */
u64 cap;
u64 ecap;
- unsigned long *domain_ids; /* bitmap of domains */
- struct dmar_domain **domains; /* ptr to domains */
int seg;
u32 gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */
- spinlock_t lock; /* protect context, domain ids */
spinlock_t register_lock; /* protect register handling */
+ int seq_id; /* sequence id of the iommu */
+
+#ifdef CONFIG_DMAR
+ unsigned long *domain_ids; /* bitmap of domains */
+ struct dmar_domain **domains; /* ptr to domains */
+ spinlock_t lock; /* protect context, domain ids */
struct root_entry *root_entry; /* virtual address */
unsigned int irq;
unsigned char name[7]; /* Device Name */
struct msi_msg saved_msg;
struct sys_device sysdev;
+#endif
+ struct q_inval *qi; /* Queued invalidation info */
+#ifdef CONFIG_INTR_REMAP
+ struct ir_table *ir_table; /* Interrupt remapping info */
+#endif
};
-#ifndef CONFIG_DMAR_GFX_WA
-static inline void iommu_prepare_gfx_mapping(void)
+static inline void __iommu_flush_cache(
+ struct intel_iommu *iommu, void *addr, int size)
{
- return;
+ if (!ecap_coherent(iommu->ecap))
+ clflush_cache_range(addr, size);
}
-#endif /* !CONFIG_DMAR_GFX_WA */
+extern struct dmar_drhd_unit * dmar_find_matched_drhd_unit(struct pci_dev *dev);
+
+extern int alloc_iommu(struct dmar_drhd_unit *drhd);
+extern void free_iommu(struct intel_iommu *iommu);
+extern int dmar_enable_qi(struct intel_iommu *iommu);
+extern void qi_global_iec(struct intel_iommu *iommu);
+
+extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
#endif
--- /dev/null
+#include <linux/dmar.h>
+#include <linux/spinlock.h>
+#include <linux/jiffies.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/io_apic.h>
+#include "intel-iommu.h"
+#include "intr_remapping.h"
+
+static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
+static int ir_ioapic_num;
+int intr_remapping_enabled;
+
+static struct {
+ struct intel_iommu *iommu;
+ u16 irte_index;
+ u16 sub_handle;
+ u8 irte_mask;
+} irq_2_iommu[NR_IRQS];
+
+static DEFINE_SPINLOCK(irq_2_ir_lock);
+
+int irq_remapped(int irq)
+{
+ if (irq > NR_IRQS)
+ return 0;
+
+ if (!irq_2_iommu[irq].iommu)
+ return 0;
+
+ return 1;
+}
+
+int get_irte(int irq, struct irte *entry)
+{
+ int index;
+
+ if (!entry || irq > NR_IRQS)
+ return -1;
+
+ spin_lock(&irq_2_ir_lock);
+ if (!irq_2_iommu[irq].iommu) {
+ spin_unlock(&irq_2_ir_lock);
+ return -1;
+ }
+
+ index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
+ *entry = *(irq_2_iommu[irq].iommu->ir_table->base + index);
+
+ spin_unlock(&irq_2_ir_lock);
+ return 0;
+}
+
+int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
+{
+ struct ir_table *table = iommu->ir_table;
+ u16 index, start_index;
+ unsigned int mask = 0;
+ int i;
+
+ if (!count)
+ return -1;
+
+ /*
+ * start the IRTE search from index 0.
+ */
+ index = start_index = 0;
+
+ if (count > 1) {
+ count = __roundup_pow_of_two(count);
+ mask = ilog2(count);
+ }
+
+ if (mask > ecap_max_handle_mask(iommu->ecap)) {
+ printk(KERN_ERR
+ "Requested mask %x exceeds the max invalidation handle"
+ " mask value %Lx\n", mask,
+ ecap_max_handle_mask(iommu->ecap));
+ return -1;
+ }
+
+ spin_lock(&irq_2_ir_lock);
+ do {
+ for (i = index; i < index + count; i++)
+ if (table->base[i].present)
+ break;
+ /* empty index found */
+ if (i == index + count)
+ break;
+
+ index = (index + count) % INTR_REMAP_TABLE_ENTRIES;
+
+ if (index == start_index) {
+ spin_unlock(&irq_2_ir_lock);
+ printk(KERN_ERR "can't allocate an IRTE\n");
+ return -1;
+ }
+ } while (1);
+
+ for (i = index; i < index + count; i++)
+ table->base[i].present = 1;
+
+ irq_2_iommu[irq].iommu = iommu;
+ irq_2_iommu[irq].irte_index = index;
+ irq_2_iommu[irq].sub_handle = 0;
+ irq_2_iommu[irq].irte_mask = mask;
+
+ spin_unlock(&irq_2_ir_lock);
+
+ return index;
+}
+
+static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
+{
+ struct qi_desc desc;
+
+ desc.low = QI_IEC_IIDEX(index) | QI_IEC_TYPE | QI_IEC_IM(mask)
+ | QI_IEC_SELECTIVE;
+ desc.high = 0;
+
+ qi_submit_sync(&desc, iommu);
+}
+
+int map_irq_to_irte_handle(int irq, u16 *sub_handle)
+{
+ int index;
+
+ spin_lock(&irq_2_ir_lock);
+ if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+ spin_unlock(&irq_2_ir_lock);
+ return -1;
+ }
+
+ *sub_handle = irq_2_iommu[irq].sub_handle;
+ index = irq_2_iommu[irq].irte_index;
+ spin_unlock(&irq_2_ir_lock);
+ return index;
+}
+
+int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
+{
+ spin_lock(&irq_2_ir_lock);
+ if (irq >= NR_IRQS || irq_2_iommu[irq].iommu) {
+ spin_unlock(&irq_2_ir_lock);
+ return -1;
+ }
+
+ irq_2_iommu[irq].iommu = iommu;
+ irq_2_iommu[irq].irte_index = index;
+ irq_2_iommu[irq].sub_handle = subhandle;
+ irq_2_iommu[irq].irte_mask = 0;
+
+ spin_unlock(&irq_2_ir_lock);
+
+ return 0;
+}
+
+int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index)
+{
+ spin_lock(&irq_2_ir_lock);
+ if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+ spin_unlock(&irq_2_ir_lock);
+ return -1;
+ }
+
+ irq_2_iommu[irq].iommu = NULL;
+ irq_2_iommu[irq].irte_index = 0;
+ irq_2_iommu[irq].sub_handle = 0;
+ irq_2_iommu[irq].irte_mask = 0;
+
+ spin_unlock(&irq_2_ir_lock);
+
+ return 0;
+}
+
+int modify_irte(int irq, struct irte *irte_modified)
+{
+ int index;
+ struct irte *irte;
+ struct intel_iommu *iommu;
+
+ spin_lock(&irq_2_ir_lock);
+ if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+ spin_unlock(&irq_2_ir_lock);
+ return -1;
+ }
+
+ iommu = irq_2_iommu[irq].iommu;
+
+ index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
+ irte = &iommu->ir_table->base[index];
+
+ set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1));
+ __iommu_flush_cache(iommu, irte, sizeof(*irte));
+
+ qi_flush_iec(iommu, index, 0);
+
+ spin_unlock(&irq_2_ir_lock);
+ return 0;
+}
+
+int flush_irte(int irq)
+{
+ int index;
+ struct intel_iommu *iommu;
+
+ spin_lock(&irq_2_ir_lock);
+ if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+ spin_unlock(&irq_2_ir_lock);
+ return -1;
+ }
+
+ iommu = irq_2_iommu[irq].iommu;
+
+ index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
+
+ qi_flush_iec(iommu, index, irq_2_iommu[irq].irte_mask);
+ spin_unlock(&irq_2_ir_lock);
+
+ return 0;
+}
+
+struct intel_iommu *map_ioapic_to_ir(int apic)
+{
+ int i;
+
+ for (i = 0; i < MAX_IO_APICS; i++)
+ if (ir_ioapic[i].id == apic)
+ return ir_ioapic[i].iommu;
+ return NULL;
+}
+
+struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
+{
+ struct dmar_drhd_unit *drhd;
+
+ drhd = dmar_find_matched_drhd_unit(dev);
+ if (!drhd)
+ return NULL;
+
+ return drhd->iommu;
+}
+
+int free_irte(int irq)
+{
+ int index, i;
+ struct irte *irte;
+ struct intel_iommu *iommu;
+
+ spin_lock(&irq_2_ir_lock);
+ if (irq >= NR_IRQS || !irq_2_iommu[irq].iommu) {
+ spin_unlock(&irq_2_ir_lock);
+ return -1;
+ }
+
+ iommu = irq_2_iommu[irq].iommu;
+
+ index = irq_2_iommu[irq].irte_index + irq_2_iommu[irq].sub_handle;
+ irte = &iommu->ir_table->base[index];
+
+ if (!irq_2_iommu[irq].sub_handle) {
+ for (i = 0; i < (1 << irq_2_iommu[irq].irte_mask); i++)
+ set_64bit((unsigned long *)irte, 0);
+ qi_flush_iec(iommu, index, irq_2_iommu[irq].irte_mask);
+ }
+
+ irq_2_iommu[irq].iommu = NULL;
+ irq_2_iommu[irq].irte_index = 0;
+ irq_2_iommu[irq].sub_handle = 0;
+ irq_2_iommu[irq].irte_mask = 0;
+
+ spin_unlock(&irq_2_ir_lock);
+
+ return 0;
+}
+
+static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
+{
+ u64 addr;
+ u32 cmd, sts;
+ unsigned long flags;
+
+ addr = virt_to_phys((void *)iommu->ir_table->base);
+
+ spin_lock_irqsave(&iommu->register_lock, flags);
+
+ dmar_writeq(iommu->reg + DMAR_IRTA_REG,
+ (addr) | IR_X2APIC_MODE(mode) | INTR_REMAP_TABLE_REG_SIZE);
+
+ /* Set interrupt-remapping table pointer */
+ cmd = iommu->gcmd | DMA_GCMD_SIRTP;
+ writel(cmd, iommu->reg + DMAR_GCMD_REG);
+
+ IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
+ readl, (sts & DMA_GSTS_IRTPS), sts);
+ spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+ /*
+ * global invalidation of interrupt entry cache before enabling
+ * interrupt-remapping.
+ */
+ qi_global_iec(iommu);
+
+ spin_lock_irqsave(&iommu->register_lock, flags);
+
+ /* Enable interrupt-remapping */
+ cmd = iommu->gcmd | DMA_GCMD_IRE;
+ iommu->gcmd |= DMA_GCMD_IRE;
+ writel(cmd, iommu->reg + DMAR_GCMD_REG);
+
+ IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
+ readl, (sts & DMA_GSTS_IRES), sts);
+
+ spin_unlock_irqrestore(&iommu->register_lock, flags);
+}
+
+
+static int setup_intr_remapping(struct intel_iommu *iommu, int mode)
+{
+ struct ir_table *ir_table;
+ struct page *pages;
+
+ ir_table = iommu->ir_table = kzalloc(sizeof(struct ir_table),
+ GFP_KERNEL);
+
+ if (!iommu->ir_table)
+ return -ENOMEM;
+
+ pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, INTR_REMAP_PAGE_ORDER);
+
+ if (!pages) {
+ printk(KERN_ERR "failed to allocate pages of order %d\n",
+ INTR_REMAP_PAGE_ORDER);
+ kfree(iommu->ir_table);
+ return -ENOMEM;
+ }
+
+ ir_table->base = page_address(pages);
+
+ iommu_set_intr_remapping(iommu, mode);
+ return 0;
+}
+
+int __init enable_intr_remapping(int eim)
+{
+ struct dmar_drhd_unit *drhd;
+ int setup = 0;
+
+ /*
+ * check for the Interrupt-remapping support
+ */
+ for_each_drhd_unit(drhd) {
+ struct intel_iommu *iommu = drhd->iommu;
+
+ if (!ecap_ir_support(iommu->ecap))
+ continue;
+
+ if (eim && !ecap_eim_support(iommu->ecap)) {
+ printk(KERN_INFO "DRHD %Lx: EIM not supported by DRHD, "
+ " ecap %Lx\n", drhd->reg_base_addr, iommu->ecap);
+ return -1;
+ }
+ }
+
+ /*
+ * Enable queued invalidation for all the DRHD's.
+ */
+ for_each_drhd_unit(drhd) {
+ int ret;
+ struct intel_iommu *iommu = drhd->iommu;
+ ret = dmar_enable_qi(iommu);
+
+ if (ret) {
+ printk(KERN_ERR "DRHD %Lx: failed to enable queued, "
+ " invalidation, ecap %Lx, ret %d\n",
+ drhd->reg_base_addr, iommu->ecap, ret);
+ return -1;
+ }
+ }
+
+ /*
+ * Setup Interrupt-remapping for all the DRHD's now.
+ */
+ for_each_drhd_unit(drhd) {
+ struct intel_iommu *iommu = drhd->iommu;
+
+ if (!ecap_ir_support(iommu->ecap))
+ continue;
+
+ if (setup_intr_remapping(iommu, eim))
+ goto error;
+
+ setup = 1;
+ }
+
+ if (!setup)
+ goto error;
+
+ intr_remapping_enabled = 1;
+
+ return 0;
+
+error:
+ /*
+ * handle error condition gracefully here!
+ */
+ return -1;
+}
+
+static int ir_parse_ioapic_scope(struct acpi_dmar_header *header,
+ struct intel_iommu *iommu)
+{
+ struct acpi_dmar_hardware_unit *drhd;
+ struct acpi_dmar_device_scope *scope;
+ void *start, *end;
+
+ drhd = (struct acpi_dmar_hardware_unit *)header;
+
+ start = (void *)(drhd + 1);
+ end = ((void *)drhd) + header->length;
+
+ while (start < end) {
+ scope = start;
+ if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) {
+ if (ir_ioapic_num == MAX_IO_APICS) {
+ printk(KERN_WARNING "Exceeded Max IO APICS\n");
+ return -1;
+ }
+
+ printk(KERN_INFO "IOAPIC id %d under DRHD base"
+ " 0x%Lx\n", scope->enumeration_id,
+ drhd->address);
+
+ ir_ioapic[ir_ioapic_num].iommu = iommu;
+ ir_ioapic[ir_ioapic_num].id = scope->enumeration_id;
+ ir_ioapic_num++;
+ }
+ start += scope->length;
+ }
+
+ return 0;
+}
+
+/*
+ * Finds the assocaition between IOAPIC's and its Interrupt-remapping
+ * hardware unit.
+ */
+int __init parse_ioapics_under_ir(void)
+{
+ struct dmar_drhd_unit *drhd;
+ int ir_supported = 0;
+
+ for_each_drhd_unit(drhd) {
+ struct intel_iommu *iommu = drhd->iommu;
+
+ if (ecap_ir_support(iommu->ecap)) {
+ if (ir_parse_ioapic_scope(drhd->hdr, iommu))
+ return -1;
+
+ ir_supported = 1;
+ }
+ }
+
+ if (ir_supported && ir_ioapic_num != nr_ioapics) {
+ printk(KERN_WARNING
+ "Not all IO-APIC's listed under remapping hardware\n");
+ return -1;
+ }
+
+ return ir_supported;
+}
--- /dev/null
+#include "intel-iommu.h"
+
+struct ioapic_scope {
+ struct intel_iommu *iommu;
+ unsigned int id;
+};
+
+#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
. = ALIGN(align); \
VMLINUX_SYMBOL(__per_cpu_start) = .; \
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \
+ *(.data.percpu.page_aligned) \
*(.data.percpu) \
*(.data.percpu.shared_aligned) \
} \
#include <asm/apicdef.h>
#include <asm/processor.h>
#include <asm/system.h>
+#include <asm/cpufeature.h>
+#include <asm/msr.h>
#define ARCH_APICTIMER_STOPS_ON_C3 1
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
-#define apic_write native_apic_write
-#define apic_read native_apic_read
#define setup_boot_clock setup_boot_APIC_clock
#define setup_secondary_clock setup_secondary_APIC_clock
#endif
extern void xapic_icr_write(u32, u32);
extern int setup_profiling_timer(unsigned int);
-static inline void native_apic_write(unsigned long reg, u32 v)
+static inline void native_apic_mem_write(u32 reg, u32 v)
{
volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg);
ASM_OUTPUT2("0" (v), "m" (*addr)));
}
-static inline u32 native_apic_read(unsigned long reg)
+static inline u32 native_apic_mem_read(u32 reg)
{
return *((volatile u32 *)(APIC_BASE + reg));
}
-extern void apic_wait_icr_idle(void);
-extern u32 safe_apic_wait_icr_idle(void);
+static inline void native_apic_msr_write(u32 reg, u32 v)
+{
+ if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR ||
+ reg == APIC_LVR)
+ return;
+
+ wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0);
+}
+
+static inline u32 native_apic_msr_read(u32 reg)
+{
+ u32 low, high;
+
+ if (reg == APIC_DFR)
+ return -1;
+
+ rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
+ return low;
+}
+
+#ifndef CONFIG_X86_32
+extern int x2apic, x2apic_preenabled;
+extern void check_x2apic(void);
+extern void enable_x2apic(void);
+extern void enable_IR_x2apic(void);
+extern void x2apic_icr_write(u32 low, u32 id);
+#endif
+
+struct apic_ops {
+ u32 (*read)(u32 reg);
+ void (*write)(u32 reg, u32 v);
+ u64 (*icr_read)(void);
+ void (*icr_write)(u32 low, u32 high);
+ void (*wait_icr_idle)(void);
+ u32 (*safe_wait_icr_idle)(void);
+};
+
+extern struct apic_ops *apic_ops;
+
+#define apic_read (apic_ops->read)
+#define apic_write (apic_ops->write)
+#define apic_icr_read (apic_ops->icr_read)
+#define apic_icr_write (apic_ops->icr_write)
+#define apic_wait_icr_idle (apic_ops->wait_icr_idle)
+#define safe_apic_wait_icr_idle (apic_ops->safe_wait_icr_idle)
+
extern int get_physical_broadcast(void);
+#ifdef CONFIG_X86_64
+static inline void ack_x2APIC_irq(void)
+{
+ /* Docs say use 0 for future compatibility */
+ native_apic_msr_write(APIC_EOI, 0);
+}
+#endif
+
+
static inline void ack_APIC_irq(void)
{
/*
#define APIC_TMICT 0x380
#define APIC_TMCCT 0x390
#define APIC_TDCR 0x3E0
+#define APIC_SELF_IPI 0x3F0
#define APIC_TDR_DIV_TMBASE (1 << 2)
#define APIC_TDR_DIV_1 0xB
#define APIC_TDR_DIV_2 0x0
#define APIC_EILVT3 0x530
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
+#define APIC_BASE_MSR 0x800
+#define X2APIC_ENABLE (1UL << 10)
#ifdef CONFIG_X86_32
# define MAX_IO_APICS 64
/* these aren't arch hooks, they are generic routines
* that can be used by the hooks */
extern void init_ISA_irqs(void);
-extern void apic_intr_init(void);
-extern void smp_intr_init(void);
extern irqreturn_t timer_interrupt(int irq, void *dev_id);
/* these are the defined hooks */
--- /dev/null
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+ return (1);
+}
+
+/* Round robin the irqs amoung the online cpus */
+static inline cpumask_t target_cpus(void)
+{
+ static unsigned long cpu = NR_CPUS;
+ do {
+ if (cpu >= NR_CPUS)
+ cpu = first_cpu(cpu_online_map);
+ else
+ cpu = next_cpu(cpu, cpu_online_map);
+ } while (cpu >= NR_CPUS);
+ return cpumask_of_cpu(cpu);
+}
+
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL 0
+#define TARGET_CPUS (target_cpus())
+#define APIC_DFR_VALUE (APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE (dest_Fixed)
+#define INT_DEST_MODE (0) /* phys delivery to target proc */
+#define NO_BALANCE_IRQ (0)
+#define WAKE_SECONDARY_VIA_INIT
+
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return (0);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+ return (1);
+}
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+ unsigned long val, id;
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ id = xapic_phys_to_log_apicid(cpu);
+ val |= SET_APIC_LOGICAL_ID(id);
+ return val;
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116). So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+ unsigned long val;
+ int cpu = smp_processor_id();
+
+ apic_write(APIC_DFR, APIC_DFR_VALUE);
+ val = calculate_ldr(cpu);
+ apic_write(APIC_LDR, val);
+}
+
+static inline void setup_apic_routing(void)
+{
+ printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
+ "Physflat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return (0);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+ return apicid_2_node[hard_smp_processor_id()];
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (mps_cpu < NR_CPUS)
+ return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+
+ return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+ return physid_mask_of_physid(phys_apicid);
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+ if (cpu >= NR_CPUS)
+ return BAD_APICID;
+ return cpu_physical_id(cpu);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+ /* For clustered we don't have a good way to do this yet - hack */
+ return physids_promote(0xFFL);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return (1);
+}
+
+/* As we are using single CPU as destination, pick only one CPU here */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int cpu;
+ int apicid;
+
+ cpu = first_cpu(cpumask);
+ apicid = cpu_to_logical_apicid(cpu);
+ return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
--- /dev/null
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define APIC_ID_MASK (0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+ return (((x)>>24)&0xFF);
+}
+
+#define GET_APIC_ID(x) get_apic_id(x)
+
+#endif
--- /dev/null
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+ send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+ cpu_clear(smp_processor_id(), mask);
+
+ if (!cpus_empty(mask))
+ send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+ send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
#define ASM_X86__BUGS_H
extern void check_bugs(void);
+
+#if defined(CONFIG_CPU_SUP_INTEL) && defined(CONFIG_X86_32)
int ppro_with_ram_bug(void);
+#else
+static inline int ppro_with_ram_bug(void) { return 0; }
+#endif
#endif /* ASM_X86__BUGS_H */
#include <asm/required-features.h>
-#define NCAPINTS 8 /* N 32-bit words worth of info */
+#define NCAPINTS 9 /* N 32-bit words worth of info */
+
+/*
+ * Note: If the comment begins with a quoted string, that string is used
+ * in /proc/cpuinfo instead of the macro name. If the string is "",
+ * this feature bit is not displayed in /proc/cpuinfo at all.
+ */
/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */
#define X86_FEATURE_DE (0*32+ 2) /* Debugging Extensions */
#define X86_FEATURE_PSE (0*32+ 3) /* Page Size Extensions */
#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */
-#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
+#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers */
#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */
#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */
#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */
#define X86_FEATURE_MTRR (0*32+12) /* Memory Type Range Registers */
#define X86_FEATURE_PGE (0*32+13) /* Page Global Enable */
#define X86_FEATURE_MCA (0*32+14) /* Machine Check Architecture */
-#define X86_FEATURE_CMOV (0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
+#define X86_FEATURE_CMOV (0*32+15) /* CMOV instructions */
+ /* (plus FCMOVcc, FCOMI with FPU) */
#define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */
#define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */
#define X86_FEATURE_PN (0*32+18) /* Processor serial number */
-#define X86_FEATURE_CLFLSH (0*32+19) /* Supports the CLFLUSH instruction */
-#define X86_FEATURE_DS (0*32+21) /* Debug Store */
+#define X86_FEATURE_CLFLSH (0*32+19) /* "clflush" CLFLUSH instruction */
+#define X86_FEATURE_DS (0*32+21) /* "dts" Debug Store */
#define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */
#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
- /* of FPU context), and CR4.OSFXSR available */
-#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */
-#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */
-#define X86_FEATURE_SELFSNOOP (0*32+27) /* CPU self snoop */
+#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
+#define X86_FEATURE_XMM (0*32+25) /* "sse" */
+#define X86_FEATURE_XMM2 (0*32+26) /* "sse2" */
+#define X86_FEATURE_SELFSNOOP (0*32+27) /* "ss" CPU self snoop */
#define X86_FEATURE_HT (0*32+28) /* Hyper-Threading */
-#define X86_FEATURE_ACC (0*32+29) /* Automatic clock control */
+#define X86_FEATURE_ACC (0*32+29) /* "tm" Automatic clock control */
#define X86_FEATURE_IA64 (0*32+30) /* IA-64 processor */
+#define X86_FEATURE_PBE (0*32+31) /* Pending Break Enable */
/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
/* Don't duplicate feature flags which are redundant with Intel! */
#define X86_FEATURE_MP (1*32+19) /* MP Capable. */
#define X86_FEATURE_NX (1*32+20) /* Execute Disable */
#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
-#define X86_FEATURE_GBPAGES (1*32+26) /* GB pages */
+#define X86_FEATURE_FXSR_OPT (1*32+25) /* FXSAVE/FXRSTOR optimizations */
+#define X86_FEATURE_GBPAGES (1*32+26) /* "pdpe1gb" GB pages */
#define X86_FEATURE_RDTSCP (1*32+27) /* RDTSCP */
#define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */
#define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */
#define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */
#define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */
/* cpu types for specific tunings: */
-#define X86_FEATURE_K8 (3*32+ 4) /* Opteron, Athlon64 */
-#define X86_FEATURE_K7 (3*32+ 5) /* Athlon */
-#define X86_FEATURE_P3 (3*32+ 6) /* P3 */
-#define X86_FEATURE_P4 (3*32+ 7) /* P4 */
+#define X86_FEATURE_K8 (3*32+ 4) /* "" Opteron, Athlon64 */
+#define X86_FEATURE_K7 (3*32+ 5) /* "" Athlon */
+#define X86_FEATURE_P3 (3*32+ 6) /* "" P3 */
+#define X86_FEATURE_P4 (3*32+ 7) /* "" P4 */
#define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
#define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */
-#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */
+#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* "" FXSAVE leaks FOP/FIP/FOP */
#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
+#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */
#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */
-#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
-#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
-#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
-#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */
+#define X86_FEATURE_SYSCALL32 (3*32+14) /* "" syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32 (3*32+15) /* "" sysenter in ia32 userspace */
+#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well */
+#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* "" Mfence synchronizes RDTSC */
+#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
+#define X86_FEATURE_11AP (3*32+19) /* "" Bad local APIC aka 11AP */
#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */
#define X86_FEATURE_AMDC1E (3*32+21) /* AMD C1E detected */
+#define X86_FEATURE_XTOPOLOGY (3*32+21) /* cpu topology enum extensions */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
-#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
-#define X86_FEATURE_MWAIT (4*32+ 3) /* Monitor/Mwait support */
-#define X86_FEATURE_DSCPL (4*32+ 4) /* CPL Qualified Debug Store */
+#define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */
+#define X86_FEATURE_PCLMULQDQ (4*32+ 1) /* PCLMULQDQ instruction */
+#define X86_FEATURE_DTES64 (4*32+ 2) /* 64-bit Debug Store */
+#define X86_FEATURE_MWAIT (4*32+ 3) /* "monitor" Monitor/Mwait support */
+#define X86_FEATURE_DSCPL (4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
+#define X86_FEATURE_VMX (4*32+ 5) /* Hardware virtualization */
+#define X86_FEATURE_SMX (4*32+ 6) /* Safer mode */
#define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */
#define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_SSSE3 (4*32+ 9) /* Supplemental SSE-3 */
#define X86_FEATURE_CID (4*32+10) /* Context ID */
+#define X86_FEATURE_FMA (4*32+12) /* Fused multiply-add */
#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */
#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */
+#define X86_FEATURE_PDCM (4*32+15) /* Performance Capabilities */
#define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */
-#define X86_FEATURE_XMM4_2 (4*32+20) /* Streaming SIMD Extensions-4.2 */
+#define X86_FEATURE_XMM4_1 (4*32+19) /* "sse4_1" SSE-4.1 */
+#define X86_FEATURE_XMM4_2 (4*32+20) /* "sse4_2" SSE-4.2 */
+#define X86_FEATURE_X2APIC (4*32+21) /* x2APIC */
+#define X86_FEATURE_AES (4*32+25) /* AES instructions */
+#define X86_FEATURE_XSAVE (4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
+#define X86_FEATURE_OSXSAVE (4*32+27) /* "" XSAVE enabled in the OS */
+#define X86_FEATURE_AVX (4*32+28) /* Advanced Vector Extensions */
/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
-#define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */
-#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* on-CPU RNG enabled */
-#define X86_FEATURE_XCRYPT (5*32+ 6) /* on-CPU crypto (xcrypt insn) */
-#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* on-CPU crypto enabled */
+#define X86_FEATURE_XSTORE (5*32+ 2) /* "rng" RNG present (xstore) */
+#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* "rng_en" RNG enabled */
+#define X86_FEATURE_XCRYPT (5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
+#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* "ace_en" on-CPU crypto enabled */
#define X86_FEATURE_ACE2 (5*32+ 8) /* Advanced Cryptography Engine v2 */
#define X86_FEATURE_ACE2_EN (5*32+ 9) /* ACE v2 enabled */
-#define X86_FEATURE_PHE (5*32+ 10) /* PadLock Hash Engine */
-#define X86_FEATURE_PHE_EN (5*32+ 11) /* PHE enabled */
-#define X86_FEATURE_PMM (5*32+ 12) /* PadLock Montgomery Multiplier */
-#define X86_FEATURE_PMM_EN (5*32+ 13) /* PMM enabled */
+#define X86_FEATURE_PHE (5*32+10) /* PadLock Hash Engine */
+#define X86_FEATURE_PHE_EN (5*32+11) /* PHE enabled */
+#define X86_FEATURE_PMM (5*32+12) /* PadLock Montgomery Multiplier */
+#define X86_FEATURE_PMM_EN (5*32+13) /* PMM enabled */
/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
-#define X86_FEATURE_IBS (6*32+ 10) /* Instruction Based Sampling */
+#define X86_FEATURE_SVM (6*32+ 2) /* Secure virtual machine */
+#define X86_FEATURE_EXTAPIC (6*32+ 3) /* Extended APIC space */
+#define X86_FEATURE_CR8_LEGACY (6*32+ 4) /* CR8 in 32-bit mode */
+#define X86_FEATURE_ABM (6*32+ 5) /* Advanced bit manipulation */
+#define X86_FEATURE_SSE4A (6*32+ 6) /* SSE-4A */
+#define X86_FEATURE_MISALIGNSSE (6*32+ 7) /* Misaligned SSE mode */
+#define X86_FEATURE_3DNOWPREFETCH (6*32+ 8) /* 3DNow prefetch instructions */
+#define X86_FEATURE_OSVW (6*32+ 9) /* OS Visible Workaround */
+#define X86_FEATURE_IBS (6*32+10) /* Instruction Based Sampling */
+#define X86_FEATURE_SSE5 (6*32+11) /* SSE-5 */
+#define X86_FEATURE_SKINIT (6*32+12) /* SKINIT/STGI instructions */
+#define X86_FEATURE_WDT (6*32+13) /* Watchdog timer */
/*
* Auxiliary flags: Linux defined - For features scattered in various
*/
#define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */
+/* Virtualization flags: Linux defined */
+#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */
+#define X86_FEATURE_VNMI (8*32+ 1) /* Intel Virtual NMI */
+#define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */
+#define X86_FEATURE_EPT (8*32+ 3) /* Intel Extended Page Table */
+#define X86_FEATURE_VPID (8*32+ 4) /* Intel Virtual Processor ID */
+
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
#include <linux/bitops.h>
} while (0)
#define setup_force_cpu_cap(bit) do { \
set_cpu_cap(&boot_cpu_data, bit); \
- clear_bit(bit, (unsigned long *)cleared_cpu_caps); \
+ clear_bit(bit, (unsigned long *)cleared_cpu_caps); \
} while (0)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
#define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES)
#define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
#define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT)
+#define cpu_has_xmm4_1 boot_cpu_has(X86_FEATURE_XMM4_1)
#define cpu_has_xmm4_2 boot_cpu_has(X86_FEATURE_XMM4_2)
+#define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC)
+#define cpu_has_xsave boot_cpu_has(X86_FEATURE_XSAVE)
#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
# define cpu_has_invlpg 1
#define E820_RESERVED 2
#define E820_ACPI 3
#define E820_NVS 4
+#define E820_UNUSABLE 5
/* reserved RAM used by kernel itself */
#define E820_RESERVED_KERN 128
extern u64 e820_hole_size(u64 start, u64 end);
extern void finish_e820_parsing(void);
extern void e820_reserve_resources(void);
+extern void e820_reserve_resources_late(void);
extern void setup_memory_map(void);
extern char *default_machine_specific_memory_setup(void);
extern char *machine_specific_memory_setup(void);
--- /dev/null
+#ifndef __ASM_ES7000_APIC_H
+#define __ASM_ES7000_APIC_H
+
+#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+ return (1);
+}
+
+static inline cpumask_t target_cpus(void)
+{
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+ return CPU_MASK_ALL;
+#else
+ return cpumask_of_cpu(smp_processor_id());
+#endif
+}
+#define TARGET_CPUS (target_cpus())
+
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
+#define INT_DELIVERY_MODE (dest_LowestPrio)
+#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */
+#define NO_BALANCE_IRQ (1)
+#undef WAKE_SECONDARY_VIA_INIT
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define APIC_DFR_VALUE (APIC_DFR_FLAT)
+#define INT_DELIVERY_MODE (dest_Fixed)
+#define INT_DEST_MODE (0) /* phys delivery to target procs */
+#define NO_BALANCE_IRQ (0)
+#undef APIC_DEST_LOGICAL
+#define APIC_DEST_LOGICAL 0x0
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return 0;
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
+
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline unsigned long calculate_ldr(int cpu)
+{
+ unsigned long id;
+ id = xapic_phys_to_log_apicid(cpu);
+ return (SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LdR and TPR before enabling
+ * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116). So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+ unsigned long val;
+ int cpu = smp_processor_id();
+
+ apic_write(APIC_DFR, APIC_DFR_VALUE);
+ val = calculate_ldr(cpu);
+ apic_write(APIC_LDR, val);
+}
+
+#ifndef CONFIG_X86_GENERICARCH
+extern void enable_apic_mode(void);
+#endif
+
+extern int apic_version [MAX_APICS];
+static inline void setup_apic_routing(void)
+{
+ int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
+ printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
+ (apic_version[apic] == 0x14) ?
+ "Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+ return 0;
+}
+
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (!mps_cpu)
+ return boot_cpu_physical_apicid;
+ else if (mps_cpu < NR_CPUS)
+ return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
+ else
+ return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+ static int id = 0;
+ physid_mask_t mask;
+ mask = physid_mask_of_physid(id);
+ ++id;
+ return mask;
+}
+
+extern u8 cpu_2_logical_apicid[];
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+ if (cpu >= NR_CPUS)
+ return BAD_APICID;
+ return (int)cpu_2_logical_apicid[cpu];
+#else
+ return logical_smp_processor_id();
+#endif
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+ /* For clustered we don't have a good way to do this yet - hack */
+ return physids_promote(0xff);
+}
+
+
+static inline void setup_portio_remap(void)
+{
+}
+
+extern unsigned int boot_cpu_physical_apicid;
+static inline int check_phys_apicid_present(int cpu_physical_apicid)
+{
+ boot_cpu_physical_apicid = read_apic_id();
+ return (1);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int num_bits_set;
+ int cpus_found = 0;
+ int cpu;
+ int apicid;
+
+ num_bits_set = cpus_weight(cpumask);
+ /* Return id to all */
+ if (num_bits_set == NR_CPUS)
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+ return 0xFF;
+#else
+ return cpu_to_logical_apicid(0);
+#endif
+ /*
+ * The cpus in the mask must all be on the apic cluster. If are not
+ * on the same apicid cluster return default value of TARGET_CPUS.
+ */
+ cpu = first_cpu(cpumask);
+ apicid = cpu_to_logical_apicid(cpu);
+ while (cpus_found < num_bits_set) {
+ if (cpu_isset(cpu, cpumask)) {
+ int new_apicid = cpu_to_logical_apicid(cpu);
+ if (apicid_cluster(apicid) !=
+ apicid_cluster(new_apicid)){
+ printk ("%s: Not a valid mask!\n",__FUNCTION__);
+#if defined CONFIG_ES7000_CLUSTERED_APIC
+ return 0xFF;
+#else
+ return cpu_to_logical_apicid(0);
+#endif
+ }
+ apicid = new_apicid;
+ cpus_found++;
+ }
+ cpu++;
+ }
+ return apicid;
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_ES7000_APIC_H */
--- /dev/null
+#ifndef __ASM_ES7000_APICDEF_H
+#define __ASM_ES7000_APICDEF_H
+
+#define APIC_ID_MASK (0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+ return (((x)>>24)&0xFF);
+}
+
+#define GET_APIC_ID(x) get_apic_id(x)
+
+#endif
--- /dev/null
+#ifndef __ASM_ES7000_IPI_H
+#define __ASM_ES7000_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+ send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+ cpu_clear(smp_processor_id(), mask);
+ if (!cpus_empty(mask))
+ send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+ send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_ES7000_IPI_H */
--- /dev/null
+#ifndef __ASM_ES7000_MPPARSE_H
+#define __ASM_ES7000_MPPARSE_H
+
+#include <linux/acpi.h>
+
+extern int parse_unisys_oem (char *oemptr);
+extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
+extern void setup_unisys(void);
+
+#ifndef CONFIG_X86_GENERICARCH
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
+#endif
+
+#ifdef CONFIG_ACPI
+
+static inline int es7000_check_dsdt(void)
+{
+ struct acpi_table_header header;
+
+ if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
+ !strncmp(header.oem_id, "UNISYS", 6))
+ return 1;
+ return 0;
+}
+#endif
+
+#endif /* __ASM_MACH_MPPARSE_H */
--- /dev/null
+#ifndef __ASM_ES7000_WAKECPU_H
+#define __ASM_ES7000_WAKECPU_H
+
+/*
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#ifdef CONFIG_ES7000_CLUSTERED_APIC
+#define WAKE_SECONDARY_VIA_MIP
+#else
+#define WAKE_SECONDARY_VIA_INIT
+#endif
+
+#ifdef WAKE_SECONDARY_VIA_MIP
+extern int es7000_start_cpu(int cpu, unsigned long eip);
+static inline int
+wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
+{
+ int boot_error = 0;
+ boot_error = es7000_start_cpu(phys_apicid, start_eip);
+ return boot_error;
+}
+#endif
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+#ifdef WAKE_SECONDARY_VIA_INIT
+ while (!atomic_read(deassert))
+ cpu_relax();
+#endif
+ return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
struct genapic {
char *name;
+ int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
u32 int_delivery_mode;
u32 int_dest_mode;
int (*apic_id_registered)(void);
void (*send_IPI_mask)(cpumask_t mask, int vector);
void (*send_IPI_allbutself)(int vector);
void (*send_IPI_all)(int vector);
+ void (*send_IPI_self)(int vector);
/* */
unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
unsigned int (*phys_pkg_id)(int index_msb);
+ unsigned int (*get_apic_id)(unsigned long x);
+ unsigned long (*set_apic_id)(unsigned int id);
+ unsigned long apic_id_mask;
};
extern struct genapic *genapic;
extern struct genapic apic_flat;
extern struct genapic apic_physflat;
+extern struct genapic apic_x2apic_cluster;
+extern struct genapic apic_x2apic_phys;
extern int acpi_madt_oem_check(char *, char *);
+extern void apic_send_IPI_self(int vector);
enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
extern enum uv_system_type get_uv_system_type(void);
extern int is_uv_system(void);
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
-extern void print_IO_APIC(void);
extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
extern void setup_ioapic_dest(void);
#endif
/* IPI functions */
+#ifdef CONFIG_X86_32
extern void send_IPI_self(int vector);
+#endif
extern void send_IPI(int dest, int vector);
/* Statistics */
#include <asm/sigcontext.h>
#include <asm/user.h>
#include <asm/uaccess.h>
+#include <asm/xsave.h>
+extern unsigned int sig_xstate_size;
extern void fpu_init(void);
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
+extern struct _fpx_sw_bytes fx_sw_reserved;
#ifdef CONFIG_IA32_EMULATION
+extern unsigned int sig_xstate_ia32_size;
+extern struct _fpx_sw_bytes fx_sw_reserved_ia32;
struct _fpstate_ia32;
-extern int save_i387_ia32(struct _fpstate_ia32 __user *buf);
-extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf);
+struct _xstate_ia32;
+extern int save_i387_xstate_ia32(void __user *buf);
+extern int restore_i387_xstate_ia32(void __user *buf);
#endif
+#define X87_FSW_ES (1 << 7) /* Exception Summary */
+
#ifdef CONFIG_X86_64
/* Ignore delayed exceptions from user space */
_ASM_EXTABLE(1b, 2b));
}
-static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
+static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
{
int err;
return err;
}
-#define X87_FSW_ES (1 << 7) /* Exception Summary */
+static inline int restore_fpu_checking(struct task_struct *tsk)
+{
+ if (task_thread_info(tsk)->status & TS_XSAVE)
+ return xrstor_checking(&tsk->thread.xstate->xsave);
+ else
+ return fxrstor_checking(&tsk->thread.xstate->fxsave);
+}
/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
is pending. Clear the x87 state here by setting it to fixed
values. The kernel data segment can be sometimes 0 and sometimes
new user value. Both should be ok.
Use the PDA as safe address because it should be already in L1. */
-static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
+static inline void clear_fpu_state(struct task_struct *tsk)
{
+ struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
+ struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+ /*
+ * xsave header may indicate the init state of the FP.
+ */
+ if ((task_thread_info(tsk)->status & TS_XSAVE) &&
+ !(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
+ return;
+
if (unlikely(fx->swd & X87_FSW_ES))
asm volatile("fnclex");
alternative_input(ASM_NOP8 ASM_NOP2,
X86_FEATURE_FXSAVE_LEAK);
}
-static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
+static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
{
int err;
return err;
}
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline void fxsave(struct task_struct *tsk)
{
/* Using "rex64; fxsave %0" is broken because, if the memory operand
uses any extended registers for addressing, a second REX prefix
: "=m" (tsk->thread.xstate->fxsave)
: "cdaSDb" (&tsk->thread.xstate->fxsave));
#endif
- clear_fpu_state(&tsk->thread.xstate->fxsave);
+}
+
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+ if (task_thread_info(tsk)->status & TS_XSAVE)
+ xsave(tsk);
+ else
+ fxsave(tsk);
+
+ clear_fpu_state(tsk);
task_thread_info(tsk)->status &= ~TS_USEDFPU;
}
static inline void restore_fpu(struct task_struct *tsk)
{
+ if (task_thread_info(tsk)->status & TS_XSAVE) {
+ xrstor_checking(&tsk->thread.xstate->xsave);
+ return;
+ }
/*
* The "nop" is needed to make the instructions the same
* length.
*/
static inline void __save_init_fpu(struct task_struct *tsk)
{
+ if (task_thread_info(tsk)->status & TS_XSAVE) {
+ struct xsave_struct *xstate = &tsk->thread.xstate->xsave;
+ struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+ xsave(tsk);
+
+ /*
+ * xsave header may indicate the init state of the FP.
+ */
+ if (!(xstate->xsave_hdr.xstate_bv & XSTATE_FP))
+ goto end;
+
+ if (unlikely(fx->swd & X87_FSW_ES))
+ asm volatile("fnclex");
+
+ /*
+ * we can do a simple return here or be paranoid :)
+ */
+ goto clear_state;
+ }
+
/* Use more nops than strictly needed in case the compiler
varies code */
alternative_input(
X86_FEATURE_FXSR,
[fx] "m" (tsk->thread.xstate->fxsave),
[fsw] "m" (tsk->thread.xstate->fxsave.swd) : "memory");
+clear_state:
/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
is pending. Clear the x87 state here by setting it to fixed
values. safe_address is a random variable that should be in L1 */
"fildl %[addr]", /* set F?P to defined value */
X86_FEATURE_FXSAVE_LEAK,
[addr] "m" (safe_address));
+end:
task_thread_info(tsk)->status &= ~TS_USEDFPU;
}
+#endif /* CONFIG_X86_64 */
+
/*
* Signal frame handlers...
*/
-extern int save_i387(struct _fpstate __user *buf);
-extern int restore_i387(struct _fpstate __user *buf);
-
-#endif /* CONFIG_X86_64 */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
static inline void __unlazy_fpu(struct task_struct *tsk)
{
extern struct irq_chip i8259A_chip;
+extern void mask_8259A(void);
+extern void unmask_8259A(void);
+
#endif /* ASM_X86__I8259_H */
} __attribute__ ((packed));
+struct IR_IO_APIC_route_entry {
+ __u64 vector : 8,
+ zero : 3,
+ index2 : 1,
+ delivery_status : 1,
+ polarity : 1,
+ irr : 1,
+ trigger : 1,
+ mask : 1,
+ reserved : 31,
+ format : 1,
+ index : 15;
+} __attribute__ ((packed));
+
#ifdef CONFIG_X86_IO_APIC
/*
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
+#ifdef CONFIG_X86_64
+extern int save_mask_IO_APIC_setup(void);
+extern void restore_IO_APIC_setup(void);
+extern void reinit_intr_remapped_IO_APIC(int);
+#endif
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
static const int timer_through_8259 = 0;
return SET_APIC_DEST_FIELD(mask);
}
+static inline void __xapic_wait_icr_idle(void)
+{
+ while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
+ cpu_relax();
+}
+
static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
unsigned int dest)
{
/*
* Wait for idle.
*/
- apic_wait_icr_idle();
+ __xapic_wait_icr_idle();
/*
* No need to touch the target chip field
/*
* Send the IPI. The write to APIC_ICR fires this off.
*/
- apic_write(APIC_ICR, cfg);
+ native_apic_mem_write(APIC_ICR, cfg);
}
/*
if (unlikely(vector == NMI_VECTOR))
safe_apic_wait_icr_idle();
else
- apic_wait_icr_idle();
+ __xapic_wait_icr_idle();
/*
* prepare target chip field
*/
cfg = __prepare_ICR2(mask);
- apic_write(APIC_ICR2, cfg);
+ native_apic_mem_write(APIC_ICR2, cfg);
/*
* program the ICR
/*
* Send the IPI. The write to APIC_ICR fires this off.
*/
- apic_write(APIC_ICR, cfg);
+ native_apic_mem_write(APIC_ICR, cfg);
}
static inline void send_IPI_mask_sequence(cpumask_t mask, int vector)
--- /dev/null
+#ifndef _ASM_IRQ_REMAPPING_H
+#define _ASM_IRQ_REMAPPING_H
+
+extern int x2apic;
+
+#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
+
+#endif
+++ /dev/null
-#ifndef ASM_X86__MACH_BIGSMP__MACH_APIC_H
-#define ASM_X86__MACH_BIGSMP__MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
-#define esr_disable (1)
-
-static inline int apic_id_registered(void)
-{
- return (1);
-}
-
-/* Round robin the irqs amoung the online cpus */
-static inline cpumask_t target_cpus(void)
-{
- static unsigned long cpu = NR_CPUS;
- do {
- if (cpu >= NR_CPUS)
- cpu = first_cpu(cpu_online_map);
- else
- cpu = next_cpu(cpu, cpu_online_map);
- } while (cpu >= NR_CPUS);
- return cpumask_of_cpu(cpu);
-}
-
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL 0
-#define TARGET_CPUS (target_cpus())
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE (dest_Fixed)
-#define INT_DEST_MODE (0) /* phys delivery to target proc */
-#define NO_BALANCE_IRQ (0)
-#define WAKE_SECONDARY_VIA_INIT
-
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return (0);
-}
-
-static inline unsigned long check_apicid_present(int bit)
-{
- return (1);
-}
-
-static inline unsigned long calculate_ldr(int cpu)
-{
- unsigned long val, id;
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- id = xapic_phys_to_log_apicid(cpu);
- val |= SET_APIC_LOGICAL_ID(id);
- return val;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
- unsigned long val;
- int cpu = smp_processor_id();
-
- apic_write(APIC_DFR, APIC_DFR_VALUE);
- val = calculate_ldr(cpu);
- apic_write(APIC_LDR, val);
-}
-
-static inline void setup_apic_routing(void)
-{
- printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
- "Physflat", nr_ioapics);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
- return (0);
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
- return apicid_2_node[hard_smp_processor_id()];
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < NR_CPUS)
- return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-
- return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
- return physid_mask_of_physid(phys_apicid);
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
- if (cpu >= NR_CPUS)
- return BAD_APICID;
- return cpu_physical_id(cpu);
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
- /* For clustered we don't have a good way to do this yet - hack */
- return physids_promote(0xFFL);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
- return (1);
-}
-
-/* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- int cpu;
- int apicid;
-
- cpu = first_cpu(cpumask);
- apicid = cpu_to_logical_apicid(cpu);
- return apicid;
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-#endif /* ASM_X86__MACH_BIGSMP__MACH_APIC_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_BIGSMP__MACH_APICDEF_H
-#define ASM_X86__MACH_BIGSMP__MACH_APICDEF_H
-
-#define APIC_ID_MASK (0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
- return (((x)>>24)&0xFF);
-}
-
-#define GET_APIC_ID(x) get_apic_id(x)
-
-#endif /* ASM_X86__MACH_BIGSMP__MACH_APICDEF_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_BIGSMP__MACH_IPI_H
-#define ASM_X86__MACH_BIGSMP__MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
- send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
-
- if (!cpus_empty(mask))
- send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
- send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* ASM_X86__MACH_BIGSMP__MACH_IPI_H */
#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
#define phys_pkg_id (genapic->phys_pkg_id)
#define vector_allocation_domain (genapic->vector_allocation_domain)
+#define read_apic_id() (GET_APIC_ID(apic_read(APIC_ID)))
+#define send_IPI_self (genapic->send_IPI_self)
extern void setup_apic_routing(void);
#else
#define INT_DELIVERY_MODE dest_LowestPrio
static inline int apic_id_registered(void)
{
- return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
+ return physid_isset(read_apic_id(), phys_cpu_present_map);
}
static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
#include <asm/apic.h>
#ifdef CONFIG_X86_64
-#define APIC_ID_MASK (0xFFu<<24)
-#define GET_APIC_ID(x) (((x)>>24)&0xFFu)
-#define SET_APIC_ID(x) (((x)<<24))
+#define APIC_ID_MASK (genapic->apic_id_mask)
+#define GET_APIC_ID(x) (genapic->get_apic_id(x))
+#define SET_APIC_ID(x) (genapic->set_apic_id(x))
#else
#define APIC_ID_MASK (0xF<<24)
static inline unsigned get_apic_id(unsigned long x)
+++ /dev/null
-#ifndef ASM_X86__MACH_ES7000__MACH_APIC_H
-#define ASM_X86__MACH_ES7000__MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
-#define esr_disable (1)
-
-static inline int apic_id_registered(void)
-{
- return (1);
-}
-
-static inline cpumask_t target_cpus(void)
-{
-#if defined CONFIG_ES7000_CLUSTERED_APIC
- return CPU_MASK_ALL;
-#else
- return cpumask_of_cpu(smp_processor_id());
-#endif
-}
-#define TARGET_CPUS (target_cpus())
-
-#if defined CONFIG_ES7000_CLUSTERED_APIC
-#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
-#define INT_DELIVERY_MODE (dest_LowestPrio)
-#define INT_DEST_MODE (1) /* logical delivery broadcast to all procs */
-#define NO_BALANCE_IRQ (1)
-#undef WAKE_SECONDARY_VIA_INIT
-#define WAKE_SECONDARY_VIA_MIP
-#else
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-#define INT_DELIVERY_MODE (dest_Fixed)
-#define INT_DEST_MODE (0) /* phys delivery to target procs */
-#define NO_BALANCE_IRQ (0)
-#undef APIC_DEST_LOGICAL
-#define APIC_DEST_LOGICAL 0x0
-#define WAKE_SECONDARY_VIA_INIT
-#endif
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return 0;
-}
-static inline unsigned long check_apicid_present(int bit)
-{
- return physid_isset(bit, phys_cpu_present_map);
-}
-
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline unsigned long calculate_ldr(int cpu)
-{
- unsigned long id;
- id = xapic_phys_to_log_apicid(cpu);
- return (SET_APIC_LOGICAL_ID(id));
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
- unsigned long val;
- int cpu = smp_processor_id();
-
- apic_write(APIC_DFR, APIC_DFR_VALUE);
- val = calculate_ldr(cpu);
- apic_write(APIC_LDR, val);
-}
-
-#ifndef CONFIG_X86_GENERICARCH
-extern void enable_apic_mode(void);
-#endif
-
-extern int apic_version [MAX_APICS];
-static inline void setup_apic_routing(void)
-{
- int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
- printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
- (apic_version[apic] == 0x14) ?
- "Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
- return 0;
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
- return 0;
-}
-
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (!mps_cpu)
- return boot_cpu_physical_apicid;
- else if (mps_cpu < NR_CPUS)
- return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
- else
- return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
- static int id = 0;
- physid_mask_t mask;
- mask = physid_mask_of_physid(id);
- ++id;
- return mask;
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
- if (cpu >= NR_CPUS)
- return BAD_APICID;
- return (int)cpu_2_logical_apicid[cpu];
-#else
- return logical_smp_processor_id();
-#endif
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
- /* For clustered we don't have a good way to do this yet - hack */
- return physids_promote(0xff);
-}
-
-
-static inline void setup_portio_remap(void)
-{
-}
-
-extern unsigned int boot_cpu_physical_apicid;
-static inline int check_phys_apicid_present(int cpu_physical_apicid)
-{
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
- return (1);
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- int num_bits_set;
- int cpus_found = 0;
- int cpu;
- int apicid;
-
- num_bits_set = cpus_weight(cpumask);
- /* Return id to all */
- if (num_bits_set == NR_CPUS)
-#if defined CONFIG_ES7000_CLUSTERED_APIC
- return 0xFF;
-#else
- return cpu_to_logical_apicid(0);
-#endif
- /*
- * The cpus in the mask must all be on the apic cluster. If are not
- * on the same apicid cluster return default value of TARGET_CPUS.
- */
- cpu = first_cpu(cpumask);
- apicid = cpu_to_logical_apicid(cpu);
- while (cpus_found < num_bits_set) {
- if (cpu_isset(cpu, cpumask)) {
- int new_apicid = cpu_to_logical_apicid(cpu);
- if (apicid_cluster(apicid) !=
- apicid_cluster(new_apicid)){
- printk ("%s: Not a valid mask!\n",__FUNCTION__);
-#if defined CONFIG_ES7000_CLUSTERED_APIC
- return 0xFF;
-#else
- return cpu_to_logical_apicid(0);
-#endif
- }
- apicid = new_apicid;
- cpus_found++;
- }
- cpu++;
- }
- return apicid;
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-#endif /* ASM_X86__MACH_ES7000__MACH_APIC_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_ES7000__MACH_APICDEF_H
-#define ASM_X86__MACH_ES7000__MACH_APICDEF_H
-
-#define APIC_ID_MASK (0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
- return (((x)>>24)&0xFF);
-}
-
-#define GET_APIC_ID(x) get_apic_id(x)
-
-#endif /* ASM_X86__MACH_ES7000__MACH_APICDEF_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_ES7000__MACH_IPI_H
-#define ASM_X86__MACH_ES7000__MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
- send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
- if (!cpus_empty(mask))
- send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
- send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* ASM_X86__MACH_ES7000__MACH_IPI_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_ES7000__MACH_MPPARSE_H
-#define ASM_X86__MACH_ES7000__MACH_MPPARSE_H
-
-#include <linux/acpi.h>
-
-extern int parse_unisys_oem (char *oemptr);
-extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void setup_unisys(void);
-
-#ifndef CONFIG_X86_GENERICARCH
-extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
-extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid);
-#endif
-
-#ifdef CONFIG_ACPI
-
-static inline int es7000_check_dsdt(void)
-{
- struct acpi_table_header header;
-
- if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
- !strncmp(header.oem_id, "UNISYS", 6))
- return 1;
- return 0;
-}
-#endif
-
-#endif /* ASM_X86__MACH_ES7000__MACH_MPPARSE_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_ES7000__MACH_WAKECPU_H
-#define ASM_X86__MACH_ES7000__MACH_WAKECPU_H
-
-/*
- * This file copes with machines that wakeup secondary CPUs by the
- * INIT, INIT, STARTUP sequence.
- */
-
-#ifdef CONFIG_ES7000_CLUSTERED_APIC
-#define WAKE_SECONDARY_VIA_MIP
-#else
-#define WAKE_SECONDARY_VIA_INIT
-#endif
-
-#ifdef WAKE_SECONDARY_VIA_MIP
-extern int es7000_start_cpu(int cpu, unsigned long eip);
-static inline int
-wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
-{
- int boot_error = 0;
- boot_error = es7000_start_cpu(phys_apicid, start_eip);
- return boot_error;
-}
-#endif
-
-#define TRAMPOLINE_LOW phys_to_virt(0x467)
-#define TRAMPOLINE_HIGH phys_to_virt(0x469)
-
-#define boot_cpu_apicid boot_cpu_physical_apicid
-
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-#ifdef WAKE_SECONDARY_VIA_INIT
- while (!atomic_read(deassert))
- cpu_relax();
-#endif
- return;
-}
-
-/* Nothing to do for most platforms, since cleared by the INIT cycle */
-static inline void smp_callin_clear_local_apic(void)
-{
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
-}
-
-#if APIC_DEBUG
- #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
-#else
- #define inquire_remote_apic(apicid) {}
-#endif
-
-#endif /* ASM_X86__MACH_ES7000__MACH_WAKECPU_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_NUMAQ__MACH_APIC_H
-#define ASM_X86__MACH_NUMAQ__MACH_APIC_H
-
-#include <asm/io.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-
-#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
-
-static inline cpumask_t target_cpus(void)
-{
- return CPU_MASK_ALL;
-}
-
-#define TARGET_CPUS (target_cpus())
-
-#define NO_BALANCE_IRQ (1)
-#define esr_disable (1)
-
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return physid_isset(apicid, bitmap);
-}
-static inline unsigned long check_apicid_present(int bit)
-{
- return physid_isset(bit, phys_cpu_present_map);
-}
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline int apic_id_registered(void)
-{
- return 1;
-}
-
-static inline void init_apic_ldr(void)
-{
- /* Already done in NUMA-Q firmware */
-}
-
-static inline void setup_apic_routing(void)
-{
- printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
- "NUMA-Q", nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int multi_timer_check(int apic, int irq)
-{
- return apic != 0 && irq == 0;
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
- /* We don't have a good way to do this yet - hack */
- return physids_promote(0xFUL);
-}
-
-/* Mapping from cpu number to logical apicid */
-extern u8 cpu_2_logical_apicid[];
-static inline int cpu_to_logical_apicid(int cpu)
-{
- if (cpu >= NR_CPUS)
- return BAD_APICID;
- return (int)cpu_2_logical_apicid[cpu];
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < 60)
- return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
- else
- return BAD_APICID;
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
- return logical_apicid >> 4;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
-{
- int node = apicid_to_node(logical_apicid);
- int cpu = __ffs(logical_apicid & 0xf);
-
- return physid_mask_of_physid(cpu + 4*node);
-}
-
-extern void *xquad_portio;
-
-static inline void setup_portio_remap(void)
-{
- int num_quads = num_online_nodes();
-
- if (num_quads <= 1)
- return;
-
- printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
- xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
- printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
- (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
- return (1);
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- return (int) 0xF;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-#endif /* ASM_X86__MACH_NUMAQ__MACH_APIC_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_NUMAQ__MACH_APICDEF_H
-#define ASM_X86__MACH_NUMAQ__MACH_APICDEF_H
-
-
-#define APIC_ID_MASK (0xF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
- return (((x)>>24)&0x0F);
-}
-
-#define GET_APIC_ID(x) get_apic_id(x)
-
-#endif /* ASM_X86__MACH_NUMAQ__MACH_APICDEF_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_NUMAQ__MACH_IPI_H
-#define ASM_X86__MACH_NUMAQ__MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
- send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
-
- if (!cpus_empty(mask))
- send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
- send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* ASM_X86__MACH_NUMAQ__MACH_IPI_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H
-#define ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H
-
-extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid);
-
-#endif /* ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H
-#define ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H
-
-/* This file copes with machines that wakeup secondary CPUs by NMIs */
-
-#define WAKE_SECONDARY_VIA_NMI
-
-#define TRAMPOLINE_LOW phys_to_virt(0x8)
-#define TRAMPOLINE_HIGH phys_to_virt(0xa)
-
-#define boot_cpu_apicid boot_cpu_logical_apicid
-
-/* We don't do anything here because we use NMI's to boot instead */
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-}
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
- */
-static inline void smp_callin_clear_local_apic(void)
-{
- clear_local_APIC();
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
- printk("Storing NMI vector\n");
- *high = *((volatile unsigned short *) TRAMPOLINE_HIGH);
- *low = *((volatile unsigned short *) TRAMPOLINE_LOW);
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
- printk("Restoring NMI vector\n");
- *((volatile unsigned short *) TRAMPOLINE_HIGH) = *high;
- *((volatile unsigned short *) TRAMPOLINE_LOW) = *low;
-}
-
-#define inquire_remote_apic(apicid) {}
-
-#endif /* ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H
-#define ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H
-
-/*
- * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs,
- * even with uni-proc kernels, so use a big array.
- *
- * This value should be the same in both the generic and summit subarches.
- * Change one, change 'em both.
- */
-#define NR_IRQS 224
-#define NR_IRQ_VECTORS 1024
-
-#endif /* ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_SUMMIT__MACH_APIC_H
-#define ASM_X86__MACH_SUMMIT__MACH_APIC_H
-
-#include <asm/smp.h>
-
-#define esr_disable (1)
-#define NO_BALANCE_IRQ (0)
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT 4
-#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
-#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
-
-static inline cpumask_t target_cpus(void)
-{
- /* CPU_MASK_ALL (0xff) has undefined behaviour with
- * dest_LowestPrio mode logical clustered apic interrupt routing
- * Just start on cpu 0. IRQ balancing will spread load
- */
- return cpumask_of_cpu(0);
-}
-#define TARGET_CPUS (target_cpus())
-
-#define INT_DELIVERY_MODE (dest_LowestPrio)
-#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return 0;
-}
-
-/* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long check_apicid_present(int bit)
-{
- return 1;
-}
-
-#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
-
-extern u8 cpu_2_logical_apicid[];
-
-static inline void init_apic_ldr(void)
-{
- unsigned long val, id;
- int count = 0;
- u8 my_id = (u8)hard_smp_processor_id();
- u8 my_cluster = (u8)apicid_cluster(my_id);
-#ifdef CONFIG_SMP
- u8 lid;
- int i;
-
- /* Create logical APIC IDs by counting CPUs already in cluster. */
- for (count = 0, i = NR_CPUS; --i >= 0; ) {
- lid = cpu_2_logical_apicid[i];
- if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
- ++count;
- }
-#endif
- /* We only have a 4 wide bitmap in cluster mode. If a deranged
- * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
- BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
- id = my_cluster | (1UL << count);
- apic_write(APIC_DFR, APIC_DFR_VALUE);
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- val |= SET_APIC_LOGICAL_ID(id);
- apic_write(APIC_LDR, val);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
- return 0;
-}
-
-static inline int apic_id_registered(void)
-{
- return 1;
-}
-
-static inline void setup_apic_routing(void)
-{
- printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
- nr_ioapics);
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
- return apicid_2_node[hard_smp_processor_id()];
-#else
- return 0;
-#endif
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
- if (cpu >= NR_CPUS)
- return BAD_APICID;
- return (int)cpu_2_logical_apicid[cpu];
-#else
- return logical_smp_processor_id();
-#endif
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < NR_CPUS)
- return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
- else
- return BAD_APICID;
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
-{
- /* For clustered we don't have a good way to do this yet - hack */
- return physids_promote(0x0F);
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int apicid)
-{
- return physid_mask_of_physid(apicid);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
- return 1;
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- int num_bits_set;
- int cpus_found = 0;
- int cpu;
- int apicid;
-
- num_bits_set = cpus_weight(cpumask);
- /* Return id to all */
- if (num_bits_set == NR_CPUS)
- return (int) 0xFF;
- /*
- * The cpus in the mask must all be on the apic cluster. If are not
- * on the same apicid cluster return default value of TARGET_CPUS.
- */
- cpu = first_cpu(cpumask);
- apicid = cpu_to_logical_apicid(cpu);
- while (cpus_found < num_bits_set) {
- if (cpu_isset(cpu, cpumask)) {
- int new_apicid = cpu_to_logical_apicid(cpu);
- if (apicid_cluster(apicid) !=
- apicid_cluster(new_apicid)){
- printk ("%s: Not a valid mask!\n",__FUNCTION__);
- return 0xFF;
- }
- apicid = apicid | new_apicid;
- cpus_found++;
- }
- cpu++;
- }
- return apicid;
-}
-
-/* cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value. For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return hard_smp_processor_id() >> index_msb;
-}
-
-#endif /* ASM_X86__MACH_SUMMIT__MACH_APIC_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_SUMMIT__MACH_APICDEF_H
-#define ASM_X86__MACH_SUMMIT__MACH_APICDEF_H
-
-#define APIC_ID_MASK (0xFF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
- return (((x)>>24)&0xFF);
-}
-
-#define GET_APIC_ID(x) get_apic_id(x)
-
-#endif /* ASM_X86__MACH_SUMMIT__MACH_APICDEF_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_SUMMIT__MACH_IPI_H
-#define ASM_X86__MACH_SUMMIT__MACH_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
- send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
-
- if (!cpus_empty(mask))
- send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
- send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* ASM_X86__MACH_SUMMIT__MACH_IPI_H */
+++ /dev/null
-#ifndef ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H
-#define ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H
-
-#include <mach_apic.h>
-#include <asm/tsc.h>
-
-extern int use_cyclone;
-
-#ifdef CONFIG_X86_SUMMIT_NUMA
-extern void setup_summit(void);
-#else
-#define setup_summit() {}
-#endif
-
-static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid)
-{
- if (!strncmp(oem, "IBM ENSW", 8) &&
- (!strncmp(productid, "VIGIL SMP", 9)
- || !strncmp(productid, "EXA", 3)
- || !strncmp(productid, "RUTHLESS SMP", 12))){
- mark_tsc_unstable("Summit based system");
- use_cyclone = 1; /*enable cyclone-timer*/
- setup_summit();
- return 1;
- }
- return 0;
-}
-
-/* Hook from generic ACPI tables.c */
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- if (!strncmp(oem_id, "IBM", 3) &&
- (!strncmp(oem_table_id, "SERVIGIL", 8)
- || !strncmp(oem_table_id, "EXA", 3))){
- mark_tsc_unstable("Summit based system");
- use_cyclone = 1; /*enable cyclone-timer*/
- setup_summit();
- return 1;
- }
- return 0;
-}
-
-struct rio_table_hdr {
- unsigned char version; /* Version number of this data structure */
- /* Version 3 adds chassis_num & WP_index */
- unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
- unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
-} __attribute__((packed));
-
-struct scal_detail {
- unsigned char node_id; /* Scalability Node ID */
- unsigned long CBAR; /* Address of 1MB register space */
- unsigned char port0node; /* Node ID port connected to: 0xFF=None */
- unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port1node; /* Node ID port connected to: 0xFF = None */
- unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port2node; /* Node ID port connected to: 0xFF = None */
- unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
-} __attribute__((packed));
-
-struct rio_detail {
- unsigned char node_id; /* RIO Node ID */
- unsigned long BBAR; /* Address of 1MB register space */
- unsigned char type; /* Type of device */
- unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
- /* For CYC: Node ID of Twister that owns this CYC */
- unsigned char port0node; /* Node ID port connected to: 0xFF=None */
- unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char port1node; /* Node ID port connected to: 0xFF=None */
- unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
- unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
- /* For CYC: 0 */
- unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
- /* = 0 : the XAPIC is not used, ie:*/
- /* ints fwded to another XAPIC */
- /* Bits1:7 Reserved */
- /* For CYC: Bits0:7 Reserved */
- unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
- /* lower slot numbers/PCI bus numbers */
- /* For CYC: No meaning */
- unsigned char chassis_num; /* 1 based Chassis number */
- /* For LookOut WPEGs this field indicates the */
- /* Expansion Chassis #, enumerated from Boot */
- /* Node WPEG external port, then Boot Node CYC */
- /* external port, then Next Vigil chassis WPEG */
- /* external port, etc. */
- /* Shared Lookouts have only 1 chassis number (the */
- /* first one assigned) */
-} __attribute__((packed));
-
-
-typedef enum {
- CompatTwister = 0, /* Compatibility Twister */
- AltTwister = 1, /* Alternate Twister of internal 8-way */
- CompatCyclone = 2, /* Compatibility Cyclone */
- AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
- CompatWPEG = 4, /* Compatibility WPEG */
- AltWPEG = 5, /* Second Planar WPEG */
- LookOutAWPEG = 6, /* LookOut WPEG */
- LookOutBWPEG = 7, /* LookOut WPEG */
-} node_type;
-
-static inline int is_WPEG(struct rio_detail *rio){
- return (rio->type == CompatWPEG || rio->type == AltWPEG ||
- rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
-}
-
-#endif /* ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H */
#include <asm/mpspec_def.h>
+extern int apic_version[MAX_APICS];
+
#ifdef CONFIG_X86_32
#include <mach_mpspec.h>
extern unsigned int def_to_bigsmp;
-extern int apic_version[MAX_APICS];
extern u8 apicid_2_node[];
extern int pic_mode;
#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
MSI_ADDR_DEST_ID_MASK)
+#define MSI_ADDR_IR_EXT_INT (1 << 4)
+#define MSI_ADDR_IR_SHV (1 << 3)
+#define MSI_ADDR_IR_INDEX1(index) ((index & 0x8000) >> 13)
+#define MSI_ADDR_IR_INDEX2(index) ((index & 0x7fff) << 5)
#endif /* ASM_X86__MSIDEF_H */
#define MSR_IA32_TSC 0x00000010
#define MSR_IA32_PLATFORM_ID 0x00000017
#define MSR_IA32_EBL_CR_POWERON 0x0000002a
+#define MSR_IA32_FEATURE_CONTROL 0x0000003a
#define MSR_IA32_APICBASE 0x0000001b
#define MSR_IA32_APICBASE_BSP (1<<8)
/* Geode defined MSRs */
#define MSR_GEODE_BUSCONT_CONF0 0x00001900
+/* Intel VT MSRs */
+#define MSR_IA32_VMX_BASIC 0x00000480
+#define MSR_IA32_VMX_PINBASED_CTLS 0x00000481
+#define MSR_IA32_VMX_PROCBASED_CTLS 0x00000482
+#define MSR_IA32_VMX_EXIT_CTLS 0x00000483
+#define MSR_IA32_VMX_ENTRY_CTLS 0x00000484
+#define MSR_IA32_VMX_MISC 0x00000485
+#define MSR_IA32_VMX_CR0_FIXED0 0x00000486
+#define MSR_IA32_VMX_CR0_FIXED1 0x00000487
+#define MSR_IA32_VMX_CR4_FIXED0 0x00000488
+#define MSR_IA32_VMX_CR4_FIXED1 0x00000489
+#define MSR_IA32_VMX_VMCS_ENUM 0x0000048a
+#define MSR_IA32_VMX_PROCBASED_CTLS2 0x0000048b
+#define MSR_IA32_VMX_EPT_VPID_CAP 0x0000048c
+
#endif /* ASM_X86__MSR_INDEX_H */
--- /dev/null
+#ifndef __ASM_NUMAQ_APIC_H
+#define __ASM_NUMAQ_APIC_H
+
+#include <asm/io.h>
+#include <linux/mmzone.h>
+#include <linux/nodemask.h>
+
+#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
+
+static inline cpumask_t target_cpus(void)
+{
+ return CPU_MASK_ALL;
+}
+
+#define TARGET_CPUS (target_cpus())
+
+#define NO_BALANCE_IRQ (1)
+#define esr_disable (1)
+
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
+#define apicid_cluster(apicid) (apicid & 0xF0)
+
+static inline int apic_id_registered(void)
+{
+ return 1;
+}
+
+static inline void init_apic_ldr(void)
+{
+ /* Already done in NUMA-Q firmware */
+}
+
+static inline void setup_apic_routing(void)
+{
+ printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
+ "NUMA-Q", nr_ioapics);
+}
+
+/*
+ * Skip adding the timer int on secondary nodes, which causes
+ * a small but painful rift in the time-space continuum.
+ */
+static inline int multi_timer_check(int apic, int irq)
+{
+ return apic != 0 && irq == 0;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+ /* We don't have a good way to do this yet - hack */
+ return physids_promote(0xFUL);
+}
+
+/* Mapping from cpu number to logical apicid */
+extern u8 cpu_2_logical_apicid[];
+static inline int cpu_to_logical_apicid(int cpu)
+{
+ if (cpu >= NR_CPUS)
+ return BAD_APICID;
+ return (int)cpu_2_logical_apicid[cpu];
+}
+
+/*
+ * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
+ * cpu to APIC ID relation to properly interact with the intelligent
+ * mode of the cluster controller.
+ */
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (mps_cpu < 60)
+ return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
+ else
+ return BAD_APICID;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+ return logical_apicid >> 4;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
+{
+ int node = apicid_to_node(logical_apicid);
+ int cpu = __ffs(logical_apicid & 0xf);
+
+ return physid_mask_of_physid(cpu + 4*node);
+}
+
+extern void *xquad_portio;
+
+static inline void setup_portio_remap(void)
+{
+ int num_quads = num_online_nodes();
+
+ if (num_quads <= 1)
+ return;
+
+ printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
+ xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
+ printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
+ (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return (1);
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+/*
+ * We use physical apicids here, not logical, so just return the default
+ * physical broadcast to stop people from breaking us
+ */
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ return (int) 0xF;
+}
+
+/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_NUMAQ_APIC_H */
--- /dev/null
+#ifndef __ASM_NUMAQ_APICDEF_H
+#define __ASM_NUMAQ_APICDEF_H
+
+
+#define APIC_ID_MASK (0xF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+ return (((x)>>24)&0x0F);
+}
+
+#define GET_APIC_ID(x) get_apic_id(x)
+
+#endif
--- /dev/null
+#ifndef __ASM_NUMAQ_IPI_H
+#define __ASM_NUMAQ_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+ send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+ cpu_clear(smp_processor_id(), mask);
+
+ if (!cpus_empty(mask))
+ send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+ send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_NUMAQ_IPI_H */
--- /dev/null
+#ifndef __ASM_NUMAQ_MPPARSE_H
+#define __ASM_NUMAQ_MPPARSE_H
+
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
+
+#endif /* __ASM_NUMAQ_MPPARSE_H */
--- /dev/null
+#ifndef __ASM_NUMAQ_WAKECPU_H
+#define __ASM_NUMAQ_WAKECPU_H
+
+/* This file copes with machines that wakeup secondary CPUs by NMIs */
+
+#define WAKE_SECONDARY_VIA_NMI
+
+#define TRAMPOLINE_LOW phys_to_virt(0x8)
+#define TRAMPOLINE_HIGH phys_to_virt(0xa)
+
+#define boot_cpu_apicid boot_cpu_logical_apicid
+
+/* We don't do anything here because we use NMI's to boot instead */
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+}
+
+/*
+ * Because we use NMIs rather than the INIT-STARTUP sequence to
+ * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
+ */
+static inline void smp_callin_clear_local_apic(void)
+{
+ clear_local_APIC();
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+ printk("Storing NMI vector\n");
+ *high = *((volatile unsigned short *) TRAMPOLINE_HIGH);
+ *low = *((volatile unsigned short *) TRAMPOLINE_LOW);
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+ printk("Restoring NMI vector\n");
+ *((volatile unsigned short *) TRAMPOLINE_HIGH) = *high;
+ *((volatile unsigned short *) TRAMPOLINE_LOW) = *low;
+}
+
+#define inquire_remote_apic(apicid) {}
+
+#endif /* __ASM_NUMAQ_WAKECPU_H */
struct pv_apic_ops {
#ifdef CONFIG_X86_LOCAL_APIC
- /*
- * Direct APIC operations, principally for VMI. Ideally
- * these shouldn't be in this interface.
- */
- void (*apic_write)(unsigned long reg, u32 v);
- u32 (*apic_read)(unsigned long reg);
void (*setup_boot_clock)(void);
void (*setup_secondary_clock)(void);
}
#ifdef CONFIG_X86_LOCAL_APIC
-/*
- * Basic functions accessing APICs.
- */
-static inline void apic_write(unsigned long reg, u32 v)
-{
- PVOP_VCALL2(pv_apic_ops.apic_write, reg, v);
-}
-
-static inline u32 apic_read(unsigned long reg)
-{
- return PVOP_CALL1(unsigned long, pv_apic_ops.apic_read, reg);
-}
-
static inline void setup_boot_clock(void)
{
PVOP_VCALL0(pv_apic_ops.setup_boot_clock);
outb(reg, 0x22);
outb(data, 0x23);
}
+
+#define getCx86_old(reg) ({ outb((reg), 0x22); inb(0x23); })
+
+#define setCx86_old(reg, data) do { \
+ outb((reg), 0x22); \
+ outb((data), 0x23); \
+} while (0)
+
#define X86_CR4_OSFXSR 0x00000200 /* enable fast FPU save and restore */
#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
#define X86_CR4_VMXE 0x00002000 /* enable VMX virtualization */
+#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
/*
* x86-64 Task Priority Register, CR8
int x86_tlbsize;
__u8 x86_virt_bits;
__u8 x86_phys_bits;
+#endif
/* CPUID returned core id bits: */
__u8 x86_coreid_bits;
/* Max extended CPUID function supported: */
__u32 extended_cpuid_level;
-#endif
/* Maximum supported CPUID level, -1=no CPUID: */
int cpuid_level;
__u32 x86_capability[NCAPINTS];
extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
extern unsigned short num_cache_leaves;
-#if defined(CONFIG_X86_HT) || defined(CONFIG_X86_64)
+extern void detect_extended_topology(struct cpuinfo_x86 *c);
extern void detect_ht(struct cpuinfo_x86 *c);
-#else
-static inline void detect_ht(struct cpuinfo_x86 *c) {}
-#endif
static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
unsigned int *ecx, unsigned int *edx)
/* 16*16 bytes for each XMM-reg = 256 bytes: */
u32 xmm_space[64];
- u32 padding[24];
+ u32 padding[12];
+
+ union {
+ u32 padding1[12];
+ u32 sw_reserved[12];
+ };
} __attribute__((aligned(16)));
u32 entry_eip;
};
+struct xsave_hdr_struct {
+ u64 xstate_bv;
+ u64 reserved1[2];
+ u64 reserved2[5];
+} __attribute__((packed));
+
+struct xsave_struct {
+ struct i387_fxsave_struct i387;
+ struct xsave_hdr_struct xsave_hdr;
+ /* new processor state extensions will go here */
+} __attribute__ ((packed, aligned (64)));
+
union thread_xstate {
struct i387_fsave_struct fsave;
struct i387_fxsave_struct fxsave;
struct i387_soft_struct soft;
+ struct xsave_struct xsave;
};
#ifdef CONFIG_X86_64
void (*mpc_oem_pci_bus)(struct mpc_config_bus *m);
void (*smp_read_mpc_oem)(struct mp_config_oemtable *oemtable,
unsigned short oemsize);
+ int (*setup_ioapic_ids)(void);
};
extern struct x86_quirks *x86_quirks;
#include <linux/compiler.h>
#include <asm/types.h>
+#define FP_XSTATE_MAGIC1 0x46505853U
+#define FP_XSTATE_MAGIC2 0x46505845U
+#define FP_XSTATE_MAGIC2_SIZE sizeof(FP_XSTATE_MAGIC2)
+
+/*
+ * bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame
+ * are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes
+ * are used to extended the fpstate pointer in the sigcontext, which now
+ * includes the extended state information along with fpstate information.
+ *
+ * Presence of FP_XSTATE_MAGIC1 at the beginning of this SW reserved
+ * area and FP_XSTATE_MAGIC2 at the end of memory layout
+ * (extended_size - FP_XSTATE_MAGIC2_SIZE) indicates the presence of the
+ * extended state information in the memory layout pointed by the fpstate
+ * pointer in sigcontext.
+ */
+struct _fpx_sw_bytes {
+ __u32 magic1; /* FP_XSTATE_MAGIC1 */
+ __u32 extended_size; /* total size of the layout referred by
+ * fpstate pointer in the sigcontext.
+ */
+ __u64 xstate_bv;
+ /* feature bit mask (including fp/sse/extended
+ * state) that is present in the memory
+ * layout.
+ */
+ __u32 xstate_size; /* actual xsave state size, based on the
+ * features saved in the layout.
+ * 'extended_size' will be greater than
+ * 'xstate_size'.
+ */
+ __u32 padding[7]; /* for future use. */
+};
+
#ifdef __i386__
/*
* As documented in the iBCS2 standard..
unsigned long reserved;
struct _fpxreg _fxsr_st[8]; /* FXSR FPU reg data is ignored */
struct _xmmreg _xmm[8];
- unsigned long padding[56];
+ unsigned long padding1[44];
+
+ union {
+ unsigned long padding2[12];
+ struct _fpx_sw_bytes sw_reserved; /* represents the extended
+ * state info */
+ };
};
#define X86_FXSR_MAGIC 0x0000
unsigned long flags;
unsigned long sp_at_signal;
unsigned short ss, __ssh;
- struct _fpstate __user *fpstate;
+
+ /*
+ * fpstate is really (struct _fpstate *) or (struct _xstate *)
+ * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+ * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+ * of extended memory layout. See comments at the defintion of
+ * (struct _fpx_sw_bytes)
+ */
+ void __user *fpstate; /* zero when no FPU/extended context */
unsigned long oldmask;
unsigned long cr2;
};
__u32 mxcsr_mask;
__u32 st_space[32]; /* 8*16 bytes for each FP-reg */
__u32 xmm_space[64]; /* 16*16 bytes for each XMM-reg */
- __u32 reserved2[24];
+ __u32 reserved2[12];
+ union {
+ __u32 reserved3[12];
+ struct _fpx_sw_bytes sw_reserved; /* represents the extended
+ * state information */
+ };
};
#ifdef __KERNEL__
unsigned long trapno;
unsigned long oldmask;
unsigned long cr2;
- struct _fpstate __user *fpstate; /* zero when no FPU context */
+
+ /*
+ * fpstate is really (struct _fpstate *) or (struct _xstate *)
+ * depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
+ * bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
+ * of extended memory layout. See comments at the defintion of
+ * (struct _fpx_sw_bytes)
+ */
+ void __user *fpstate; /* zero when no FPU/extended context */
unsigned long reserved1[8];
};
#else /* __KERNEL__ */
#endif /* !__i386__ */
+struct _xsave_hdr {
+ __u64 xstate_bv;
+ __u64 reserved1[2];
+ __u64 reserved2[5];
+};
+
+/*
+ * Extended state pointed by the fpstate pointer in the sigcontext.
+ * In addition to the fpstate, information encoded in the xstate_hdr
+ * indicates the presence of other extended state information
+ * supported by the processor and OS.
+ */
+struct _xstate {
+ struct _fpstate fpstate;
+ struct _xsave_hdr xstate_hdr;
+ /* new processor state extensions go here */
+};
+
#endif /* ASM_X86__SIGCONTEXT_H */
__u32 reserved;
struct _fpxreg _fxsr_st[8];
struct _xmmreg _xmm[8]; /* It's actually 16 */
- __u32 padding[56];
+ __u32 padding[44];
+ union {
+ __u32 padding2[12];
+ struct _fpx_sw_bytes sw_reserved;
+ };
};
struct sigcontext_ia32 {
#ifdef CONFIG_X86_LOCAL_APIC
+#ifndef CONFIG_X86_64
static inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
}
-#ifndef CONFIG_X86_64
+#include <mach_apicdef.h>
static inline unsigned int read_apic_id(void)
{
- return *(u32 *)(APIC_BASE + APIC_ID);
+ unsigned int reg;
+
+ reg = *(u32 *)(APIC_BASE + APIC_ID);
+
+ return GET_APIC_ID(reg);
}
-#else
-extern unsigned int read_apic_id(void);
#endif
-# ifdef APIC_DEFINITION
+# if defined(APIC_DEFINITION) || defined(CONFIG_X86_64)
extern int hard_smp_processor_id(void);
# else
-# include <mach_apicdef.h>
+#include <mach_apicdef.h>
static inline int hard_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
- return GET_APIC_ID(read_apic_id());
+ return read_apic_id();
}
# endif /* APIC_DEFINITION */
--- /dev/null
+#ifndef __ASM_SUMMIT_APIC_H
+#define __ASM_SUMMIT_APIC_H
+
+#include <asm/smp.h>
+
+#define esr_disable (1)
+#define NO_BALANCE_IRQ (0)
+
+/* In clustered mode, the high nibble of APIC ID is a cluster number.
+ * The low nibble is a 4-bit bitmap. */
+#define XAPIC_DEST_CPUS_SHIFT 4
+#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
+#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
+
+#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
+
+static inline cpumask_t target_cpus(void)
+{
+ /* CPU_MASK_ALL (0xff) has undefined behaviour with
+ * dest_LowestPrio mode logical clustered apic interrupt routing
+ * Just start on cpu 0. IRQ balancing will spread load
+ */
+ return cpumask_of_cpu(0);
+}
+#define TARGET_CPUS (target_cpus())
+
+#define INT_DELIVERY_MODE (dest_LowestPrio)
+#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return 0;
+}
+
+/* we don't use the phys_cpu_present_map to indicate apicid presence */
+static inline unsigned long check_apicid_present(int bit)
+{
+ return 1;
+}
+
+#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
+
+extern u8 cpu_2_logical_apicid[];
+
+static inline void init_apic_ldr(void)
+{
+ unsigned long val, id;
+ int count = 0;
+ u8 my_id = (u8)hard_smp_processor_id();
+ u8 my_cluster = (u8)apicid_cluster(my_id);
+#ifdef CONFIG_SMP
+ u8 lid;
+ int i;
+
+ /* Create logical APIC IDs by counting CPUs already in cluster. */
+ for (count = 0, i = NR_CPUS; --i >= 0; ) {
+ lid = cpu_2_logical_apicid[i];
+ if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
+ ++count;
+ }
+#endif
+ /* We only have a 4 wide bitmap in cluster mode. If a deranged
+ * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
+ BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
+ id = my_cluster | (1UL << count);
+ apic_write(APIC_DFR, APIC_DFR_VALUE);
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ val |= SET_APIC_LOGICAL_ID(id);
+ apic_write(APIC_LDR, val);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return 0;
+}
+
+static inline int apic_id_registered(void)
+{
+ return 1;
+}
+
+static inline void setup_apic_routing(void)
+{
+ printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
+ nr_ioapics);
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+ return apicid_2_node[hard_smp_processor_id()];
+#else
+ return 0;
+#endif
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+#ifdef CONFIG_SMP
+ if (cpu >= NR_CPUS)
+ return BAD_APICID;
+ return (int)cpu_2_logical_apicid[cpu];
+#else
+ return logical_smp_processor_id();
+#endif
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (mps_cpu < NR_CPUS)
+ return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+ else
+ return BAD_APICID;
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
+{
+ /* For clustered we don't have a good way to do this yet - hack */
+ return physids_promote(0x0F);
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int apicid)
+{
+ return physid_mask_of_physid(0);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return 1;
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int num_bits_set;
+ int cpus_found = 0;
+ int cpu;
+ int apicid;
+
+ num_bits_set = cpus_weight(cpumask);
+ /* Return id to all */
+ if (num_bits_set == NR_CPUS)
+ return (int) 0xFF;
+ /*
+ * The cpus in the mask must all be on the apic cluster. If are not
+ * on the same apicid cluster return default value of TARGET_CPUS.
+ */
+ cpu = first_cpu(cpumask);
+ apicid = cpu_to_logical_apicid(cpu);
+ while (cpus_found < num_bits_set) {
+ if (cpu_isset(cpu, cpumask)) {
+ int new_apicid = cpu_to_logical_apicid(cpu);
+ if (apicid_cluster(apicid) !=
+ apicid_cluster(new_apicid)){
+ printk ("%s: Not a valid mask!\n",__FUNCTION__);
+ return 0xFF;
+ }
+ apicid = apicid | new_apicid;
+ cpus_found++;
+ }
+ cpu++;
+ }
+ return apicid;
+}
+
+/* cpuid returns the value latched in the HW at reset, not the APIC ID
+ * register's value. For any box whose BIOS changes APIC IDs, like
+ * clustered APIC systems, we must use hard_smp_processor_id.
+ *
+ * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
+ */
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return hard_smp_processor_id() >> index_msb;
+}
+
+#endif /* __ASM_SUMMIT_APIC_H */
--- /dev/null
+#ifndef __ASM_SUMMIT_APICDEF_H
+#define __ASM_SUMMIT_APICDEF_H
+
+#define APIC_ID_MASK (0xFF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+ return (x>>24)&0xFF;
+}
+
+#define GET_APIC_ID(x) get_apic_id(x)
+
+#endif
--- /dev/null
+#ifndef __ASM_SUMMIT_IPI_H
+#define __ASM_SUMMIT_IPI_H
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+ send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+ cpu_clear(smp_processor_id(), mask);
+
+ if (!cpus_empty(mask))
+ send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+ send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_SUMMIT_IPI_H */
--- /dev/null
+#ifndef _ASM_IRQ_VECTORS_LIMITS_H
+#define _ASM_IRQ_VECTORS_LIMITS_H
+
+/*
+ * For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs,
+ * even with uni-proc kernels, so use a big array.
+ *
+ * This value should be the same in both the generic and summit subarches.
+ * Change one, change 'em both.
+ */
+#define NR_IRQS 224
+#define NR_IRQ_VECTORS 1024
+
+#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
--- /dev/null
+#ifndef __ASM_SUMMIT_MPPARSE_H
+#define __ASM_SUMMIT_MPPARSE_H
+
+#include <asm/tsc.h>
+
+extern int use_cyclone;
+
+#ifdef CONFIG_X86_SUMMIT_NUMA
+extern void setup_summit(void);
+#else
+#define setup_summit() {}
+#endif
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ if (!strncmp(oem, "IBM ENSW", 8) &&
+ (!strncmp(productid, "VIGIL SMP", 9)
+ || !strncmp(productid, "EXA", 3)
+ || !strncmp(productid, "RUTHLESS SMP", 12))){
+ mark_tsc_unstable("Summit based system");
+ use_cyclone = 1; /*enable cyclone-timer*/
+ setup_summit();
+ return 1;
+ }
+ return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (!strncmp(oem_id, "IBM", 3) &&
+ (!strncmp(oem_table_id, "SERVIGIL", 8)
+ || !strncmp(oem_table_id, "EXA", 3))){
+ mark_tsc_unstable("Summit based system");
+ use_cyclone = 1; /*enable cyclone-timer*/
+ setup_summit();
+ return 1;
+ }
+ return 0;
+}
+
+struct rio_table_hdr {
+ unsigned char version; /* Version number of this data structure */
+ /* Version 3 adds chassis_num & WP_index */
+ unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */
+ unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */
+} __attribute__((packed));
+
+struct scal_detail {
+ unsigned char node_id; /* Scalability Node ID */
+ unsigned long CBAR; /* Address of 1MB register space */
+ unsigned char port0node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port1node; /* Node ID port connected to: 0xFF = None */
+ unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port2node; /* Node ID port connected to: 0xFF = None */
+ unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */
+} __attribute__((packed));
+
+struct rio_detail {
+ unsigned char node_id; /* RIO Node ID */
+ unsigned long BBAR; /* Address of 1MB register space */
+ unsigned char type; /* Type of device */
+ unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/
+ /* For CYC: Node ID of Twister that owns this CYC */
+ unsigned char port0node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char port1node; /* Node ID port connected to: 0xFF=None */
+ unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */
+ unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */
+ /* For CYC: 0 */
+ unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */
+ /* = 0 : the XAPIC is not used, ie:*/
+ /* ints fwded to another XAPIC */
+ /* Bits1:7 Reserved */
+ /* For CYC: Bits0:7 Reserved */
+ unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */
+ /* lower slot numbers/PCI bus numbers */
+ /* For CYC: No meaning */
+ unsigned char chassis_num; /* 1 based Chassis number */
+ /* For LookOut WPEGs this field indicates the */
+ /* Expansion Chassis #, enumerated from Boot */
+ /* Node WPEG external port, then Boot Node CYC */
+ /* external port, then Next Vigil chassis WPEG */
+ /* external port, etc. */
+ /* Shared Lookouts have only 1 chassis number (the */
+ /* first one assigned) */
+} __attribute__((packed));
+
+
+typedef enum {
+ CompatTwister = 0, /* Compatibility Twister */
+ AltTwister = 1, /* Alternate Twister of internal 8-way */
+ CompatCyclone = 2, /* Compatibility Cyclone */
+ AltCyclone = 3, /* Alternate Cyclone of internal 8-way */
+ CompatWPEG = 4, /* Compatibility WPEG */
+ AltWPEG = 5, /* Second Planar WPEG */
+ LookOutAWPEG = 6, /* LookOut WPEG */
+ LookOutBWPEG = 7, /* LookOut WPEG */
+} node_type;
+
+static inline int is_WPEG(struct rio_detail *rio){
+ return (rio->type == CompatWPEG || rio->type == AltWPEG ||
+ rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
+}
+
+#endif /* __ASM_SUMMIT_MPPARSE_H */
#define TS_POLLING 0x0004 /* true if in idle loop
and not sleeping */
#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */
+#define TS_XSAVE 0x0010 /* Use xsave/xrstor */
#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
#ifndef ASM_X86__UCONTEXT_H
#define ASM_X86__UCONTEXT_H
+#define UC_FP_XSTATE 0x1 /* indicates the presence of extended state
+ * information in the memory layout pointed
+ * by the fpstate pointer in the ucontext's
+ * sigcontext struct (uc_mcontext).
+ */
+
struct ucontext {
unsigned long uc_flags;
struct ucontext *uc_link;
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright 2008 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2 or (at your
+ * option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * asm-x86/xcr.h
+ *
+ * Definitions for the eXtended Control Register instructions
+ */
+
+#ifndef _ASM_X86_XCR_H
+#define _ASM_X86_XCR_H
+
+#define XCR_XFEATURE_ENABLED_MASK 0x00000000
+
+#ifdef __KERNEL__
+# ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+static inline u64 xgetbv(u32 index)
+{
+ u32 eax, edx;
+
+ asm volatile(".byte 0x0f,0x01,0xd0" /* xgetbv */
+ : "=a" (eax), "=d" (edx)
+ : "c" (index));
+ return eax + ((u64)edx << 32);
+}
+
+static inline void xsetbv(u32 index, u64 value)
+{
+ u32 eax = value;
+ u32 edx = value >> 32;
+
+ asm volatile(".byte 0x0f,0x01,0xd1" /* xsetbv */
+ : : "a" (eax), "d" (edx), "c" (index));
+}
+
+# endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_XCR_H */
--- /dev/null
+#ifndef __ASM_X86_XSAVE_H
+#define __ASM_X86_XSAVE_H
+
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+
+#define XSTATE_FP 0x1
+#define XSTATE_SSE 0x2
+
+#define XSTATE_FPSSE (XSTATE_FP | XSTATE_SSE)
+
+#define FXSAVE_SIZE 512
+
+/*
+ * These are the features that the OS can handle currently.
+ */
+#define XCNTXT_MASK (XSTATE_FP | XSTATE_SSE)
+
+#ifdef CONFIG_X86_64
+#define REX_PREFIX "0x48, "
+#else
+#define REX_PREFIX
+#endif
+
+extern unsigned int xstate_size;
+extern u64 pcntxt_mask;
+extern struct xsave_struct *init_xstate_buf;
+
+extern void xsave_cntxt_init(void);
+extern void xsave_init(void);
+extern int init_fpu(struct task_struct *child);
+extern int check_for_xstate(struct i387_fxsave_struct __user *buf,
+ void __user *fpstate,
+ struct _fpx_sw_bytes *sw);
+
+static inline int xrstor_checking(struct xsave_struct *fx)
+{
+ int err;
+
+ asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl $-1,%[err]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ _ASM_EXTABLE(1b, 3b)
+ : [err] "=r" (err)
+ : "D" (fx), "m" (*fx), "a" (-1), "d" (-1), "0" (0)
+ : "memory");
+
+ return err;
+}
+
+static inline int xsave_user(struct xsave_struct __user *buf)
+{
+ int err;
+ __asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl $-1,%[err]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ _ASM_ALIGN "\n"
+ _ASM_PTR "1b,3b\n"
+ ".previous"
+ : [err] "=r" (err)
+ : "D" (buf), "a" (-1), "d" (-1), "0" (0)
+ : "memory");
+ if (unlikely(err) && __clear_user(buf, xstate_size))
+ err = -EFAULT;
+ /* No need to clear here because the caller clears USED_MATH */
+ return err;
+}
+
+static inline int xrestore_user(struct xsave_struct __user *buf, u64 mask)
+{
+ int err;
+ struct xsave_struct *xstate = ((__force struct xsave_struct *)buf);
+ u32 lmask = mask;
+ u32 hmask = mask >> 32;
+
+ __asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl $-1,%[err]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ _ASM_ALIGN "\n"
+ _ASM_PTR "1b,3b\n"
+ ".previous"
+ : [err] "=r" (err)
+ : "D" (xstate), "a" (lmask), "d" (hmask), "0" (0)
+ : "memory"); /* memory required? */
+ return err;
+}
+
+static inline void xrstor_state(struct xsave_struct *fx, u64 mask)
+{
+ u32 lmask = mask;
+ u32 hmask = mask >> 32;
+
+ asm volatile(".byte " REX_PREFIX "0x0f,0xae,0x2f\n\t"
+ : : "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
+ : "memory");
+}
+
+static inline void xsave(struct task_struct *tsk)
+{
+ /* This, however, we can work around by forcing the compiler to select
+ an addressing mode that doesn't require extended registers. */
+ __asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27"
+ : : "D" (&(tsk->thread.xstate->xsave)),
+ "a" (-1), "d"(-1) : "memory");
+}
+#endif
#include <linux/types.h>
#include <linux/msi.h>
-#ifdef CONFIG_DMAR
+#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
struct intel_iommu;
+struct dmar_drhd_unit {
+ struct list_head list; /* list of drhd units */
+ struct acpi_dmar_header *hdr; /* ACPI header */
+ u64 reg_base_addr; /* register base address*/
+ struct pci_dev **devices; /* target device array */
+ int devices_cnt; /* target device count */
+ u8 ignored:1; /* ignore drhd */
+ u8 include_all:1;
+ struct intel_iommu *iommu;
+};
+
+extern struct list_head dmar_drhd_units;
+
+#define for_each_drhd_unit(drhd) \
+ list_for_each_entry(drhd, &dmar_drhd_units, list)
+
+extern int dmar_table_init(void);
+extern int early_dmar_detect(void);
+extern int dmar_dev_scope_init(void);
+
+/* Intel IOMMU detection */
+extern void detect_intel_iommu(void);
+
+
+extern int parse_ioapics_under_ir(void);
+extern int alloc_iommu(struct dmar_drhd_unit *);
+#else
+static inline void detect_intel_iommu(void)
+{
+ return;
+}
+
+static inline int dmar_table_init(void)
+{
+ return -ENODEV;
+}
+#endif /* !CONFIG_DMAR && !CONFIG_INTR_REMAP */
+
+#ifdef CONFIG_INTR_REMAP
+extern int intr_remapping_enabled;
+extern int enable_intr_remapping(int);
+
+struct irte {
+ union {
+ struct {
+ __u64 present : 1,
+ fpd : 1,
+ dst_mode : 1,
+ redir_hint : 1,
+ trigger_mode : 1,
+ dlvry_mode : 3,
+ avail : 4,
+ __reserved_1 : 4,
+ vector : 8,
+ __reserved_2 : 8,
+ dest_id : 32;
+ };
+ __u64 low;
+ };
+
+ union {
+ struct {
+ __u64 sid : 16,
+ sq : 2,
+ svt : 2,
+ __reserved_3 : 44;
+ };
+ __u64 high;
+ };
+};
+extern int get_irte(int irq, struct irte *entry);
+extern int modify_irte(int irq, struct irte *irte_modified);
+extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
+extern int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
+ u16 sub_handle);
+extern int map_irq_to_irte_handle(int irq, u16 *sub_handle);
+extern int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index);
+extern int flush_irte(int irq);
+extern int free_irte(int irq);
+
+extern int irq_remapped(int irq);
+extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
+extern struct intel_iommu *map_ioapic_to_ir(int apic);
+#else
+#define irq_remapped(irq) (0)
+#define enable_intr_remapping(mode) (-1)
+#define intr_remapping_enabled (0)
+#endif
+
+#ifdef CONFIG_DMAR
extern const char *dmar_get_fault_reason(u8 fault_reason);
/* Can't use the common MSI interrupt functions
extern int dmar_set_interrupt(struct intel_iommu *iommu);
extern int arch_setup_dmar_msi(unsigned int irq);
-/* Intel IOMMU detection and initialization functions */
-extern void detect_intel_iommu(void);
-extern int intel_iommu_init(void);
-
-extern int dmar_table_init(void);
-extern int early_dmar_detect(void);
-
-extern struct list_head dmar_drhd_units;
+extern int iommu_detected, no_iommu;
extern struct list_head dmar_rmrr_units;
-
-struct dmar_drhd_unit {
- struct list_head list; /* list of drhd units */
- u64 reg_base_addr; /* register base address*/
- struct pci_dev **devices; /* target device array */
- int devices_cnt; /* target device count */
- u8 ignored:1; /* ignore drhd */
- u8 include_all:1;
- struct intel_iommu *iommu;
-};
-
struct dmar_rmrr_unit {
struct list_head list; /* list of rmrr units */
+ struct acpi_dmar_header *hdr; /* ACPI header */
u64 base_address; /* reserved base address*/
u64 end_address; /* reserved end address */
struct pci_dev **devices; /* target devices */
int devices_cnt; /* target device count */
};
-#define for_each_drhd_unit(drhd) \
- list_for_each_entry(drhd, &dmar_drhd_units, list)
#define for_each_rmrr_units(rmrr) \
list_for_each_entry(rmrr, &dmar_rmrr_units, list)
+/* Intel DMAR initialization functions */
+extern int intel_iommu_init(void);
+extern int dmar_disabled;
#else
-static inline void detect_intel_iommu(void)
-{
- return;
-}
static inline int intel_iommu_init(void)
{
+#ifdef CONFIG_INTR_REMAP
+ return dmar_dev_scope_init();
+#else
return -ENODEV;
+#endif
}
-
#endif /* !CONFIG_DMAR */
#endif /* __DMAR_H__ */
extern int request_resource(struct resource *root, struct resource *new);
extern int release_resource(struct resource *new);
+extern void reserve_region_with_split(struct resource *root,
+ resource_size_t start, resource_size_t end,
+ const char *name);
extern int insert_resource(struct resource *parent, struct resource *new);
extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
extern int allocate_resource(struct resource *root, struct resource *new,
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
+#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
__attribute__((__section__(SHARED_ALIGNED_SECTION))) \
PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name \
____cacheline_aligned_in_smp
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
+ __attribute__((__section__(".data.percpu.page_aligned"))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
#else
#define DEFINE_PER_CPU(type, name) \
PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
DEFINE_PER_CPU(type, name)
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
+ DEFINE_PER_CPU(type, name)
#endif
#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
set_balance_irq_affinity(irq, cpumask);
#ifdef CONFIG_GENERIC_PENDING_IRQ
- set_pending_irq(irq, cpumask);
+ if (desc->status & IRQ_MOVE_PCNTXT) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ desc->chip->set_affinity(irq, cpumask);
+ spin_unlock_irqrestore(&desc->lock, flags);
+ } else
+ set_pending_irq(irq, cpumask);
#else
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
return result;
}
+static void __init __reserve_region_with_split(struct resource *root,
+ resource_size_t start, resource_size_t end,
+ const char *name)
+{
+ struct resource *parent = root;
+ struct resource *conflict;
+ struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL);
+
+ if (!res)
+ return;
+
+ res->name = name;
+ res->start = start;
+ res->end = end;
+ res->flags = IORESOURCE_BUSY;
+
+ for (;;) {
+ conflict = __request_resource(parent, res);
+ if (!conflict)
+ break;
+ if (conflict != parent) {
+ parent = conflict;
+ if (!(conflict->flags & IORESOURCE_BUSY))
+ continue;
+ }
+
+ /* Uhhuh, that didn't work out.. */
+ kfree(res);
+ res = NULL;
+ break;
+ }
+
+ if (!res) {
+ printk(KERN_DEBUG " __reserve_region_with_split: (%s) [%llx, %llx], res: (%s) [%llx, %llx]\n",
+ conflict->name, conflict->start, conflict->end,
+ name, start, end);
+
+ /* failed, split and try again */
+
+ /* conflict coverred whole area */
+ if (conflict->start <= start && conflict->end >= end)
+ return;
+
+ if (conflict->start > start)
+ __reserve_region_with_split(root, start, conflict->start-1, name);
+ if (!(conflict->flags & IORESOURCE_BUSY)) {
+ resource_size_t common_start, common_end;
+
+ common_start = max(conflict->start, start);
+ common_end = min(conflict->end, end);
+ if (common_start < common_end)
+ __reserve_region_with_split(root, common_start, common_end, name);
+ }
+ if (conflict->end < end)
+ __reserve_region_with_split(root, conflict->end+1, end, name);
+ }
+
+}
+
+void reserve_region_with_split(struct resource *root,
+ resource_size_t start, resource_size_t end,
+ const char *name)
+{
+ write_lock(&resource_lock);
+ __reserve_region_with_split(root, start, end, name);
+ write_unlock(&resource_lock);
+}
+
EXPORT_SYMBOL(adjust_resource);
/**
projects / cascardo / linux.git / commitdiff