ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi

Copy sun8i-q8-common.dtsi to sun8i-reference-design-tablet.dtsi. This
is part of renaming all the sun?i-q8-common.dtsi files to
sun?i-reference-design-tablet.dtsi since most of the hw-config in there
is shared by all sunxi tablets.

Note that in this case we keep sun5i-q8-common.dtsi as it is shared
between a23 / a33 q8 tablets. Also we leave the usb-wifi config in
there (rather then in sun8i-reference-design-tablet.dtsi) as most
sun8i tablets use sdio wifi rather then usb wifi.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 0b85ea4..60fa958 100644 (file)
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -40,181 +40,12 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include "sunxi-reference-design-tablet.dtsi"
-
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-       aliases {
-               serial0 = &r_uart;
-       };
-
-       backlight: backlight {
-               compatible = "pwm-backlight";
-               pinctrl-names = "default";
-               pinctrl-0 = <&bl_en_pin_q8>;
-               pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-               brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-               default-brightness-level = <8>;
-               enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
+#include "sun8i-reference-design-tablet.dtsi"
 
 &ehci0 {
        status  = "okay";
 };
 
-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
-       vmmc-supply = <&reg_dcdc1>;
-       bus-width = <4>;
-       cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-       cd-inverted;
-       status = "okay";
-};
-
-&pio {
-       bl_en_pin_q8: bl_en_pin@0 {
-               allwinner,pins = "PH6";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-       };
-
-       mmc0_cd_pin_q8: mmc0_cd_pin@0 {
-               allwinner,pins = "PB4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PH8";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-};
-
-&r_rsb {
-       status = "okay";
-
-       axp22x: pmic@3a3 {
-               compatible = "x-powers,axp223";
-               reg = <0x3a3>;
-               interrupt-parent = <&nmi_intc>;
-               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-               eldoin-supply = <&reg_dcdc1>;
-               x-powers,drive-vbus-en;
-       };
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo1 {
-       regulator-always-on;
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
-       regulator-name = "vcc-io";
-};
-
-&reg_aldo2 {
-       regulator-always-on;
-       regulator-min-microvolt = <2350000>;
-       regulator-max-microvolt = <2650000>;
-       regulator-name = "vdd-dll";
-};
-
-&reg_aldo3 {
-       regulator-always-on;
-       regulator-min-microvolt = <2700000>;
-       regulator-max-microvolt = <3300000>;
-       regulator-name = "vcc-pll-avcc";
-};
-
-&reg_dc1sw {
-       regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-       regulator-always-on;
-       regulator-min-microvolt = <900000>;
-       regulator-max-microvolt = <1400000>;
-       regulator-name = "vdd-cpus";
-};
-
-&reg_dcdc1 {
-       regulator-always-on;
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
-       regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-       regulator-always-on;
-       regulator-min-microvolt = <900000>;
-       regulator-max-microvolt = <1400000>;
-       regulator-name = "vdd-sys";
-};
-
-&reg_dcdc3 {
-       regulator-always-on;
-       regulator-min-microvolt = <900000>;
-       regulator-max-microvolt = <1400000>;
-       regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc5 {
-       regulator-always-on;
-       regulator-min-microvolt = <1500000>;
-       regulator-max-microvolt = <1500000>;
-       regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-       regulator-min-microvolt = <3300000>;
-       regulator-max-microvolt = <3300000>;
-       regulator-name = "vcc-wifi";
-};
-
-&reg_drivevbus {
-       regulator-name = "usb0-vbus";
-       status = "okay";
-};
-
-&reg_rtc_ldo {
-       regulator-name = "vcc-rtc";
-};
-
-&r_uart {
-       pinctrl-names = "default";
-       pinctrl-0 = <&r_uart_pins_a>;
-       status = "okay";
-};
-
-&simplefb_lcd {
-       vcc-lcd-supply = <&reg_dc1sw>;
-};
-
-&usb_otg {
-       dr_mode = "otg";
-       status = "okay";
-};
-
-&usb_power_supply {
-       status = "okay";
-};
-
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
-       usb0_vbus_power-supply = <&usb_power_supply>;
-       usb0_vbus-supply = <&reg_drivevbus>;
        usb1_vbus-supply = <&reg_dldo1>;
-       status = "okay";
 };

diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
new file mode 100644 (file)
index 0000000..b8546ef
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -0,0 +1,215 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+       aliases {
+               serial0 = &r_uart;
+       };
+
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pinctrl-names = "default";
+               pinctrl-0 = <&bl_en_pin>;
+               pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+               brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+               default-brightness-level = <8>;
+               enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+       vmmc-supply = <&reg_dcdc1>;
+       bus-width = <4>;
+       cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+       cd-inverted;
+       status = "okay";
+};
+
+&pio {
+       bl_en_pin: bl_en_pin@0 {
+               allwinner,pins = "PH6";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       mmc0_cd_pin: mmc0_cd_pin@0 {
+               allwinner,pins = "PB4";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PH8";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+};
+
+&r_rsb {
+       status = "okay";
+
+       axp22x: pmic@3a3 {
+               compatible = "x-powers,axp223";
+               reg = <0x3a3>;
+               interrupt-parent = <&nmi_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+               eldoin-supply = <&reg_dcdc1>;
+               x-powers,drive-vbus-en;
+       };
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <2350000>;
+       regulator-max-microvolt = <2650000>;
+       regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <2700000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+       regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+       regulator-always-on;
+       regulator-min-microvolt = <900000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <900000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <900000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+       regulator-always-on;
+       regulator-min-microvolt = <1500000>;
+       regulator-max-microvolt = <1500000>;
+       regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+       regulator-name = "usb0-vbus";
+       status = "okay";
+};
+
+&reg_rtc_ldo {
+       regulator-name = "vcc-rtc";
+};
+
+&r_uart {
+       pinctrl-names = "default";
+       pinctrl-0 = <&r_uart_pins_a>;
+       status = "okay";
+};
+
+&simplefb_lcd {
+       vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb_power_supply {
+       status = "okay";
+};
+
+&usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>;
+       usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
+       usb0_vbus-supply = <&reg_drivevbus>;
+       status = "okay";
+};