mfd: max8998: Add support for Device Tree
authorTomasz Figa <t.figa@samsung.com>
Tue, 25 Jun 2013 14:08:10 +0000 (16:08 +0200)
committerSamuel Ortiz <sameo@linux.intel.com>
Sun, 30 Jun 2013 21:30:04 +0000 (23:30 +0200)
This patch adds Device Tree support to max8998 driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Documentation/devicetree/bindings/mfd/max8998.txt [new file with mode: 0644]
drivers/mfd/max8998.c
drivers/regulator/max8998.c
drivers/rtc/rtc-max8998.c
include/linux/mfd/max8998-private.h
include/linux/mfd/max8998.h

diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
new file mode 100644 (file)
index 0000000..23a3650
--- /dev/null
@@ -0,0 +1,119 @@
+* Maxim MAX8998, National/TI LP3974 multi-function device
+
+The Maxim MAX8998 is a multi-function device which includes voltage/current
+regulators, real time clock, battery charging controller and several
+other sub-blocks. It is interfaced using an I2C interface. Each sub-block
+is addressed by the host system using different i2c slave address.
+
+PMIC sub-block
+--------------
+
+The PMIC sub-block contains a number of voltage and current regulators,
+with controllable parameters and dynamic voltage scaling capability.
+In addition, it includes a real time clock and battery charging controller
+as well. It is accessible at I2C address 0x66.
+
+Required properties:
+- compatible: Should be one of the following:
+    - "maxim,max8998" for Maxim MAX8998
+    - "national,lp3974" or "ti,lp3974" for National/TI LP3974.
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from MAX8998 are routed to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+  - First interrupt specifier is for main interrupt.
+  - Second interrupt specifier is for power-on/-off interrupt.
+- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used
+  for buck 1 dvs. The format of the gpio specifier depends on the gpio
+  controller.
+- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used
+  for buck 2 dvs. The format of the gpio specifier depends on the gpio
+  controller.
+- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from
+  the possible 4 options selectable by the dvs gpios. The value of this
+  property should be 0, 1, 2 or 3. If not specified or out of range,
+  a default value of 0 is taken.
+- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from
+  the possible 2 options selectable by the dvs gpios. The value of this
+  property should be 0 or 1. If not specified or out of range, a default
+  value of 0 is taken.
+- max8998,pmic-buck-voltage-lock: If present, disallows changing of
+  preprogrammed buck dvfs voltages.
+
+Additional properties required if max8998,pmic-buck1-dvs-gpios is defined:
+- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts
+  for buck1 regulator that can be selected using dvs gpio.
+
+Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
+- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
+  for buck2 regulator that can be selected using dvs gpio.
+
+Regulators: All the regulators of MAX8998 to be instantiated shall be
+listed in a child node named 'regulators'. Each regulator is represented
+by a child node of the 'regulators' node.
+
+       regulator-name {
+               /* standard regulator bindings here */
+       };
+
+Following regulators of the MAX8998 PMIC block are supported. Note that
+the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK
+number as described in MAX8998 datasheet.
+
+       - LDOn
+                 - valid values for n are 2 to 17
+                 - Example: LDO2, LDO10, LDO17
+       - BUCKn
+                 - valid values for n are 1 to 4.
+                 - Example: BUCK1, BUCK2, BUCK3, BUCK4
+
+       - ENVICHG: Battery Charging Current Monitor Output. This is a fixed
+                  voltage type regulator
+
+       - ESAFEOUT1: (ldo19)
+       - ESAFEOUT2: (ld020)
+
+Standard regulator bindings are used inside regulator subnodes. Check
+  Documentation/devicetree/bindings/regulator/regulator.txt
+for more details.
+
+Example:
+
+       pmic@66 {
+               compatible = "maxim,max8998-pmic";
+               reg = <0x66>;
+               interrupt-parent = <&wakeup_eint>;
+               interrupts = <4 0>, <3 0>;
+
+               /* Buck 1 DVS settings */
+               max8998,pmic-buck1-default-dvs-idx = <0>;
+               max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
+                                              <&gpx0 1 1 0 0>; /* SET2 */
+               max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+                                                <1000000>, <950000>;
+
+               /* Buck 2 DVS settings */
+               max8998,pmic-buck2-default-dvs-idx = <0>;
+               max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
+               max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
+
+               /* Regulators to instantiate */
+               regulators {
+                       ldo2_reg: LDO2 {
+                               regulator-name = "VDD_ALIVE_1.1V";
+                               regulator-min-microvolt = <1100000>;
+                               regulator-max-microvolt = <1100000>;
+                               regulator-always-on;
+                       };
+
+                       buck1_reg: BUCK1 {
+                               regulator-name = "VDD_ARM_1.2V";
+                               regulator-min-microvolt = <950000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
+               };
+       };
index d7218cc..21af51a 100644 (file)
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
 #include <linux/mfd/core.h>
@@ -128,6 +131,56 @@ int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
 }
 EXPORT_SYMBOL(max8998_update_reg);
 
+#ifdef CONFIG_OF
+static struct of_device_id max8998_dt_match[] = {
+       { .compatible = "maxim,max8998", .data = (void *)TYPE_MAX8998 },
+       { .compatible = "national,lp3974", .data = (void *)TYPE_LP3974 },
+       { .compatible = "ti,lp3974", .data = (void *)TYPE_LP3974 },
+       {},
+};
+MODULE_DEVICE_TABLE(of, max8998_dt_match);
+#endif
+
+/*
+ * Only the common platform data elements for max8998 are parsed here from the
+ * device tree. Other sub-modules of max8998 such as pmic, rtc and others have
+ * to parse their own platform data elements from device tree.
+ *
+ * The max8998 platform data structure is instantiated here and the drivers for
+ * the sub-modules need not instantiate another instance while parsing their
+ * platform data.
+ */
+static struct max8998_platform_data *max8998_i2c_parse_dt_pdata(
+                                                       struct device *dev)
+{
+       struct max8998_platform_data *pd;
+
+       pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+       if (!pd)
+               return ERR_PTR(-ENOMEM);
+
+       pd->ono = irq_of_parse_and_map(dev->of_node, 1);
+
+       /*
+        * ToDo: the 'wakeup' member in the platform data is more of a linux
+        * specfic information. Hence, there is no binding for that yet and
+        * not parsed here.
+        */
+       return pd;
+}
+
+static inline int max8998_i2c_get_driver_data(struct i2c_client *i2c,
+                                               const struct i2c_device_id *id)
+{
+       if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) {
+               const struct of_device_id *match;
+               match = of_match_node(max8998_dt_match, i2c->dev.of_node);
+               return (int)match->data;
+       }
+
+       return (int)id->driver_data;
+}
+
 static int max8998_i2c_probe(struct i2c_client *i2c,
                            const struct i2c_device_id *id)
 {
@@ -139,11 +192,20 @@ static int max8998_i2c_probe(struct i2c_client *i2c,
        if (max8998 == NULL)
                return -ENOMEM;
 
+       if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node) {
+               pdata = max8998_i2c_parse_dt_pdata(&i2c->dev);
+               if (IS_ERR(pdata)) {
+                       ret = PTR_ERR(pdata);
+                       goto err;
+               }
+       }
+
        i2c_set_clientdata(i2c, max8998);
        max8998->dev = &i2c->dev;
        max8998->i2c = i2c;
        max8998->irq = i2c->irq;
-       max8998->type = id->driver_data;
+       max8998->type = max8998_i2c_get_driver_data(i2c, id);
+       max8998->pdata = pdata;
        if (pdata) {
                max8998->ono = pdata->ono;
                max8998->irq_base = pdata->irq_base;
@@ -158,7 +220,7 @@ static int max8998_i2c_probe(struct i2c_client *i2c,
 
        pm_runtime_set_active(max8998->dev);
 
-       switch (id->driver_data) {
+       switch (max8998->type) {
        case TYPE_LP3974:
                ret = mfd_add_devices(max8998->dev, -1,
                                      lp3974_devs, ARRAY_SIZE(lp3974_devs),
@@ -314,6 +376,7 @@ static struct i2c_driver max8998_i2c_driver = {
                   .name = "max8998",
                   .owner = THIS_MODULE,
                   .pm = &max8998_pm,
+                  .of_match_table = of_match_ptr(max8998_dt_match),
        },
        .probe = max8998_i2c_probe,
        .remove = max8998_i2c_remove,
index 8c45b93..a4c53b2 100644 (file)
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/mfd/max8998.h>
 #include <linux/mfd/max8998-private.h>
 
@@ -589,13 +592,13 @@ static struct regulator_desc regulators[] = {
                .type           = REGULATOR_VOLTAGE,
                .owner          = THIS_MODULE,
        }, {
-               .name           = "EN32KHz AP",
+               .name           = "EN32KHz-AP",
                .id             = MAX8998_EN32KHZ_AP,
                .ops            = &max8998_others_ops,
                .type           = REGULATOR_VOLTAGE,
                .owner          = THIS_MODULE,
        }, {
-               .name           = "EN32KHz CP",
+               .name           = "EN32KHz-CP",
                .id             = MAX8998_EN32KHZ_CP,
                .ops            = &max8998_others_ops,
                .type           = REGULATOR_VOLTAGE,
@@ -621,10 +624,122 @@ static struct regulator_desc regulators[] = {
        }
 };
 
+static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev,
+                       struct max8998_platform_data *pdata,
+                       struct device_node *pmic_np)
+{
+       int gpio;
+
+       gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 0);
+       if (!gpio_is_valid(gpio)) {
+               dev_err(iodev->dev, "invalid buck1 gpio[0]: %d\n", gpio);
+               return -EINVAL;
+       }
+       pdata->buck1_set1 = gpio;
+
+       gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 1);
+       if (!gpio_is_valid(gpio)) {
+               dev_err(iodev->dev, "invalid buck1 gpio[1]: %d\n", gpio);
+               return -EINVAL;
+       }
+       pdata->buck1_set2 = gpio;
+
+       gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck2-dvs-gpio", 0);
+       if (!gpio_is_valid(gpio)) {
+               dev_err(iodev->dev, "invalid buck 2 gpio: %d\n", gpio);
+               return -EINVAL;
+       }
+       pdata->buck2_set3 = gpio;
+
+       return 0;
+}
+
+static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev,
+                                       struct max8998_platform_data *pdata)
+{
+       struct device_node *pmic_np = iodev->dev->of_node;
+       struct device_node *regulators_np, *reg_np;
+       struct max8998_regulator_data *rdata;
+       unsigned int i;
+       int ret;
+
+       regulators_np = of_get_child_by_name(pmic_np, "regulators");
+       if (!regulators_np) {
+               dev_err(iodev->dev, "could not find regulators sub-node\n");
+               return -EINVAL;
+       }
+
+       /* count the number of regulators to be supported in pmic */
+       pdata->num_regulators = of_get_child_count(regulators_np);
+
+       rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
+                               pdata->num_regulators, GFP_KERNEL);
+       if (!rdata)
+               return -ENOMEM;
+
+       pdata->regulators = rdata;
+       for (i = 0; i < ARRAY_SIZE(regulators); ++i) {
+               reg_np = of_get_child_by_name(regulators_np,
+                                                       regulators[i].name);
+               if (!reg_np)
+                       continue;
+
+               rdata->id = regulators[i].id;
+               rdata->initdata = of_get_regulator_init_data(
+                                                       iodev->dev, reg_np);
+               rdata->reg_node = reg_np;
+               ++rdata;
+       }
+       pdata->num_regulators = rdata - pdata->regulators;
+
+       ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
+       if (ret)
+               return -EINVAL;
+
+       if (of_find_property(pmic_np, "max8998,pmic-buck-voltage-lock", NULL))
+               pdata->buck_voltage_lock = true;
+
+       ret = of_property_read_u32(pmic_np,
+                                       "max8998,pmic-buck1-default-dvs-idx",
+                                       &pdata->buck1_default_idx);
+       if (!ret && pdata->buck1_default_idx >= 4) {
+               pdata->buck1_default_idx = 0;
+               dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n");
+       }
+
+       ret = of_property_read_u32(pmic_np,
+                                       "max8998,pmic-buck2-default-dvs-idx",
+                                       &pdata->buck2_default_idx);
+       if (!ret && pdata->buck2_default_idx >= 2) {
+               pdata->buck2_default_idx = 0;
+               dev_warn(iodev->dev, "invalid value for default dvs index, using 0 instead\n");
+       }
+
+       ret = of_property_read_u32_array(pmic_np,
+                                       "max8998,pmic-buck1-dvs-voltage",
+                                       pdata->buck1_voltage,
+                                       ARRAY_SIZE(pdata->buck1_voltage));
+       if (ret) {
+               dev_err(iodev->dev, "buck1 voltages not specified\n");
+               return -EINVAL;
+       }
+
+       ret = of_property_read_u32_array(pmic_np,
+                                       "max8998,pmic-buck2-dvs-voltage",
+                                       pdata->buck2_voltage,
+                                       ARRAY_SIZE(pdata->buck2_voltage));
+       if (ret) {
+               dev_err(iodev->dev, "buck2 voltages not specified\n");
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
 static int max8998_pmic_probe(struct platform_device *pdev)
 {
        struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-       struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
+       struct max8998_platform_data *pdata = iodev->pdata;
        struct regulator_config config = { };
        struct regulator_dev **rdev;
        struct max8998_data *max8998;
@@ -637,6 +752,12 @@ static int max8998_pmic_probe(struct platform_device *pdev)
                return -ENODEV;
        }
 
+       if (IS_ENABLED(CONFIG_OF) && iodev->dev->of_node) {
+               ret = max8998_pmic_dt_parse_pdata(iodev, pdata);
+               if (ret)
+                       return ret;
+       }
+
        max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_data),
                               GFP_KERNEL);
        if (!max8998)
@@ -750,13 +871,15 @@ static int max8998_pmic_probe(struct platform_device *pdev)
                }
 
                config.dev = max8998->dev;
+               config.of_node = pdata->regulators[i].reg_node;
                config.init_data = pdata->regulators[i].initdata;
                config.driver_data = max8998;
 
                rdev[i] = regulator_register(&regulators[index], &config);
                if (IS_ERR(rdev[i])) {
                        ret = PTR_ERR(rdev[i]);
-                       dev_err(max8998->dev, "regulator init failed\n");
+                       dev_err(max8998->dev, "regulator %s init failed (%d)\n",
+                                               regulators[index].name, ret);
                        rdev[i] = NULL;
                        goto err;
                }
index 46f2301..042a873 100644 (file)
@@ -253,7 +253,7 @@ static const struct rtc_class_ops max8998_rtc_ops = {
 static int max8998_rtc_probe(struct platform_device *pdev)
 {
        struct max8998_dev *max8998 = dev_get_drvdata(pdev->dev.parent);
-       struct max8998_platform_data *pdata = dev_get_platdata(max8998->dev);
+       struct max8998_platform_data *pdata = max8998->pdata;
        struct max8998_rtc_info *info;
        int ret;
 
index bfb48b6..84844e0 100644 (file)
@@ -137,6 +137,7 @@ struct irq_domain;
 /**
  * struct max8998_dev - max8998 master device for sub-drivers
  * @dev: master device of the chip (can be used to access platform data)
+ * @pdata: platform data for the driver and subdrivers
  * @i2c: i2c client private data for regulator
  * @rtc: i2c client private data for rtc
  * @iolock: mutex for serializing io access
@@ -150,6 +151,7 @@ struct irq_domain;
  */
 struct max8998_dev {
        struct device *dev;
+       struct max8998_platform_data *pdata;
        struct i2c_client *i2c;
        struct i2c_client *rtc;
        struct mutex iolock;
index ca56bb0..e3956a6 100644 (file)
@@ -58,10 +58,12 @@ enum {
  * max8998_regulator_data - regulator data
  * @id: regulator id
  * @initdata: regulator init data (contraints, supplies, ...)
+ * @reg_node: DT node of regulator (unused on non-DT platforms)
  */
 struct max8998_regulator_data {
        int                             id;
        struct regulator_init_data      *initdata;
+       struct device_node              *reg_node;
 };
 
 /**