preferred request size for workloads where sustained
throughput is desired. If no optimal I/O size is
reported this file contains 0.
+
+What: /sys/block/<disk>/queue/nomerges
+Date: January 2010
+Contact:
+Description:
+ Standard I/O elevator operations include attempts to
+ merge contiguous I/Os. For known random I/O loads these
+ attempts will always fail and result in extra cycles
+ being spent in the kernel. This allows one to turn off
+ this behavior on one of two ways: When set to 1, complex
+ merge checks are disabled, but the simple one-shot merges
+ with the previous I/O request are enabled. When set to 2,
+ all merge tries are disabled. The default value is 0 -
+ which enables all types of merge tries.
nomerges (RW)
-------------
-This enables the user to disable the lookup logic involved with IO merging
-requests in the block layer. Merging may still occur through a direct
-1-hit cache, since that comes for (almost) free. The IO scheduler will not
-waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults
-to 0, enabling all merges.
+This enables the user to disable the lookup logic involved with IO
+merging requests in the block layer. By default (0) all merges are
+enabled. When set to 1 only simple one-hit merges will be tried. When
+set to 2 no merge algorithms will be tried (including one-hit or more
+complex tree/hash lookups).
nr_requests (RW)
----------------
* blk_stack_limits - adjust queue_limits for stacked devices
* @t: the stacking driver limits (top device)
* @b: the underlying queue limits (bottom, component device)
- * @offset: offset to beginning of data within component device
+ * @start: first data sector within component device
*
* Description:
* This function is used by stacking drivers like MD and DM to ensure
* the alignment_offset is undefined.
*/
int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
- sector_t offset)
+ sector_t start)
{
- sector_t alignment;
- unsigned int top, bottom, ret = 0;
+ unsigned int top, bottom, alignment, ret = 0;
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
t->misaligned |= b->misaligned;
- alignment = queue_limit_alignment_offset(b, offset);
+ alignment = queue_limit_alignment_offset(b, start);
/* Bottom device has different alignment. Check that it is
* compatible with the current top alignment.
/* Discard alignment and granularity */
if (b->discard_granularity) {
- unsigned int granularity = b->discard_granularity;
- offset &= granularity - 1;
-
- alignment = (granularity + b->discard_alignment - offset)
- & (granularity - 1);
+ alignment = queue_limit_discard_alignment(b, start);
if (t->discard_granularity != 0 &&
t->discard_alignment != alignment) {
start += get_start_sect(bdev);
- return blk_stack_limits(t, &bq->limits, start << 9);
+ return blk_stack_limits(t, &bq->limits, start);
}
EXPORT_SYMBOL(bdev_stack_limits);
* @offset: offset to beginning of data within component device
*
* Description:
- * Merges the limits for two queues. Returns 0 if alignment
- * didn't change. Returns -1 if adding the bottom device caused
- * misalignment.
+ * Merges the limits for a top level gendisk and a bottom level
+ * block_device.
*/
void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
sector_t offset)
struct request_queue *t = disk->queue;
struct request_queue *b = bdev_get_queue(bdev);
- offset += get_start_sect(bdev) << 9;
-
- if (blk_stack_limits(&t->limits, &b->limits, offset) < 0) {
+ if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
disk_name(disk, 0, top);
static ssize_t queue_nomerges_show(struct request_queue *q, char *page)
{
- return queue_var_show(blk_queue_nomerges(q), page);
+ return queue_var_show((blk_queue_nomerges(q) << 1) |
+ blk_queue_noxmerges(q), page);
}
static ssize_t queue_nomerges_store(struct request_queue *q, const char *page,
ssize_t ret = queue_var_store(&nm, page, count);
spin_lock_irq(q->queue_lock);
- if (nm)
+ queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
+ queue_flag_clear(QUEUE_FLAG_NOXMERGES, q);
+ if (nm == 2)
queue_flag_set(QUEUE_FLAG_NOMERGES, q);
- else
- queue_flag_clear(QUEUE_FLAG_NOMERGES, q);
+ else if (nm)
+ queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
spin_unlock_irq(q->queue_lock);
return ret;
struct request *__rq;
int ret;
+ /*
+ * Levels of merges:
+ * nomerges: No merges at all attempted
+ * noxmerges: Only simple one-hit cache try
+ * merges: All merge tries attempted
+ */
+ if (blk_queue_nomerges(q))
+ return ELEVATOR_NO_MERGE;
+
/*
* First try one-hit cache.
*/
}
}
- if (blk_queue_nomerges(q))
+ if (blk_queue_noxmerges(q))
return ELEVATOR_NO_MERGE;
/*
.MemoryWindowSize = DAC960_PD_RegisterWindowSize,
};
-static struct pci_device_id DAC960_id_table[] = {
+static const struct pci_device_id DAC960_id_table[] = {
{
.vendor = PCI_VENDOR_ID_MYLEX,
.device = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
kfree(buff);
return -ENOMEM;
}
- // Fill in the command type
+ /* Fill in the command type */
c->cmd_type = CMD_IOCTL_PEND;
- // Fill in Command Header
- c->Header.ReplyQueue = 0; // unused in simple mode
- if (iocommand.buf_size > 0) // buffer to fill
+ /* Fill in Command Header */
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ if (iocommand.buf_size > 0) /* buffer to fill */
{
c->Header.SGList = 1;
c->Header.SGTotal = 1;
- } else // no buffers to fill
+ } else /* no buffers to fill */
{
c->Header.SGList = 0;
c->Header.SGTotal = 0;
}
c->Header.LUN = iocommand.LUN_info;
- c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag
+ /* use the kernel address the cmd block for tag */
+ c->Header.Tag.lower = c->busaddr;
- // Fill in Request block
+ /* Fill in Request block */
c->Request = iocommand.Request;
- // Fill in the scatter gather information
+ /* Fill in the scatter gather information */
if (iocommand.buf_size > 0) {
temp64.val = pci_map_single(host->pdev, buff,
iocommand.buf_size,
c->SG[0].Addr.lower = temp64.val32.lower;
c->SG[0].Addr.upper = temp64.val32.upper;
c->SG[0].Len = iocommand.buf_size;
- c->SG[0].Ext = 0; // we are not chaining
+ c->SG[0].Ext = 0; /* we are not chaining */
}
c->waiting = &wait;
c->Request.Type.Direction = XFER_READ;
c->Request.Timeout = 0;
c->Request.CDB[0] = cmd;
- c->Request.CDB[6] = (size >> 24) & 0xFF; //MSB
+ c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
c->Request.CDB[7] = (size >> 16) & 0xFF;
c->Request.CDB[8] = (size >> 8) & 0xFF;
c->Request.CDB[9] = size & 0xFF;
"cciss: reading geometry failed, volume "
"does not support reading geometry\n");
drv->heads = 255;
- drv->sectors = 32; // Sectors per track
+ drv->sectors = 32; /* Sectors per track */
drv->cylinders = total_size + 1;
drv->raid_level = RAID_UNKNOWN;
} else {
/* fill in the request */
drv = creq->rq_disk->private_data;
- c->Header.ReplyQueue = 0; // unused in simple mode
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
/* got command from pool, so use the command block index instead */
/* for direct lookups. */
/* The first 2 bits are reserved for controller error reporting. */
c->Header.Tag.lower = (c->cmdindex << 3);
c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */
memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
- c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
- c->Request.Type.Type = TYPE_CMD; // It is a command.
+ c->Request.CDBLen = 10; /* 12 byte commands not in FW yet; */
+ c->Request.Type.Type = TYPE_CMD; /* It is a command. */
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction =
(rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
- c->Request.Timeout = 0; // Don't time out
+ c->Request.Timeout = 0; /* Don't time out */
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
start_blk = blk_rq_pos(creq);
if (likely(blk_fs_request(creq))) {
if(h->cciss_read == CCISS_READ_10) {
c->Request.CDB[1] = 0;
- c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB
+ c->Request.CDB[2] = (start_blk >> 24) & 0xff; /* MSB */
c->Request.CDB[3] = (start_blk >> 16) & 0xff;
c->Request.CDB[4] = (start_blk >> 8) & 0xff;
c->Request.CDB[5] = start_blk & 0xff;
- c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
+ c->Request.CDB[6] = 0; /* (sect >> 24) & 0xff; MSB */
c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
c->Request.CDBLen = 16;
c->Request.CDB[1]= 0;
- c->Request.CDB[2]= (upper32 >> 24) & 0xff; //MSB
+ c->Request.CDB[2]= (upper32 >> 24) & 0xff; /* MSB */
c->Request.CDB[3]= (upper32 >> 16) & 0xff;
c->Request.CDB[4]= (upper32 >> 8) & 0xff;
c->Request.CDB[5]= upper32 & 0xff;
int ctlr;
char devname[8];
char *product_name;
- char firm_ver[4]; // Firmware version
+ char firm_ver[4]; /* Firmware version */
struct pci_dev *pdev;
__u32 board_id;
void __iomem *vaddr;
BYTE cciss_write;
BYTE cciss_read_capacity;
- // information about each logical volume
+ /* information about each logical volume */
drive_info_struct *drv[CISS_MAX_LUN];
struct access_method access;
unsigned int maxSG;
spinlock_t lock;
- //* pointers to command and error info pool */
+ /* pointers to command and error info pool */
CommandList_struct *cmd_pool;
dma_addr_t cmd_pool_dhandle;
ErrorInfo_struct *errinfo_pool;
*/
int next_to_run;
- // Disk structures we need to pass back
+ /* Disk structures we need to pass back */
struct gendisk *gendisk[CISS_MAX_LUN];
#ifdef CONFIG_CISS_SCSI_TAPE
void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
#define CCISS_LOCK(i) (&hba[i]->lock)
#endif /* CCISS_H */
-
#ifndef CCISS_CMD_H
#define CCISS_CMD_H
-//###########################################################################
-//DEFINES
-//###########################################################################
+
+#include <linux/cciss_defs.h>
+
+/* DEFINES */
#define CISS_VERSION "1.00"
-//general boundary definitions
-#define SENSEINFOBYTES 32//note that this value may vary between host implementations
+/* general boundary definitions */
#define MAXSGENTRIES 32
#define CCISS_SG_CHAIN 0x80000000
#define MAXREPLYQS 256
-//Command Status value
-#define CMD_SUCCESS 0x0000
-#define CMD_TARGET_STATUS 0x0001
-#define CMD_DATA_UNDERRUN 0x0002
-#define CMD_DATA_OVERRUN 0x0003
-#define CMD_INVALID 0x0004
-#define CMD_PROTOCOL_ERR 0x0005
-#define CMD_HARDWARE_ERR 0x0006
-#define CMD_CONNECTION_LOST 0x0007
-#define CMD_ABORTED 0x0008
-#define CMD_ABORT_FAILED 0x0009
-#define CMD_UNSOLICITED_ABORT 0x000A
-#define CMD_TIMEOUT 0x000B
-#define CMD_UNABORTABLE 0x000C
-
/* Unit Attentions ASC's as defined for the MSA2012sa */
#define POWER_OR_RESET 0x29
#define STATE_CHANGED 0x2a
#define ASYM_ACCESS_CHANGED 0x06
#define LUN_CAPACITY_CHANGED 0x09
-//transfer direction
-#define XFER_NONE 0x00
-#define XFER_WRITE 0x01
-#define XFER_READ 0x02
-#define XFER_RSVD 0x03
-
-//task attribute
-#define ATTR_UNTAGGED 0x00
-#define ATTR_SIMPLE 0x04
-#define ATTR_HEADOFQUEUE 0x05
-#define ATTR_ORDERED 0x06
-#define ATTR_ACA 0x07
-
-//cdb type
-#define TYPE_CMD 0x00
-#define TYPE_MSG 0x01
-
-//config space register offsets
+/* config space register offsets */
#define CFG_VENDORID 0x00
#define CFG_DEVICEID 0x02
#define CFG_I2OBAR 0x10
#define CFG_MEM1BAR 0x14
-//i2o space register offsets
+/* i2o space register offsets */
#define I2O_IBDB_SET 0x20
#define I2O_IBDB_CLEAR 0x70
#define I2O_INT_STATUS 0x30
#define I2O_OBPOST_Q 0x44
#define I2O_DMA1_CFG 0x214
-//Configuration Table
+/* Configuration Table */
#define CFGTBL_ChangeReq 0x00000001l
#define CFGTBL_AccCmds 0x00000001l
__u64 val;
} u64bit;
-// Type defs used in the following structs
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
+/* Type defs used in the following structs */
#define QWORD vals32
-//###########################################################################
-//STRUCTURES
-//###########################################################################
-#define CISS_MAX_LUN 1024
+/* STRUCTURES */
#define CISS_MAX_PHYS_LUN 1024
-// SCSI-3 Cmmands
+/* SCSI-3 Cmmands */
#pragma pack(1)
#define CISS_INQUIRY 0x12
-//Date returned
+/* Date returned */
typedef struct _InquiryData_struct
{
BYTE data_byte[36];
#define CISS_REPORT_LOG 0xc2 /* Report Logical LUNs */
#define CISS_REPORT_PHYS 0xc3 /* Report Physical LUNs */
-// Data returned
+/* Data returned */
typedef struct _ReportLUNdata_struct
{
BYTE LUNListLength[4];
#define CCISS_READ_CAPACITY 0x25 /* Read Capacity */
typedef struct _ReadCapdata_struct
{
- BYTE total_size[4]; // Total size in blocks
- BYTE block_size[4]; // Size of blocks in bytes
+ BYTE total_size[4]; /* Total size in blocks */
+ BYTE block_size[4]; /* Size of blocks in bytes */
} ReadCapdata_struct;
#define CCISS_READ_CAPACITY_16 0x9e /* Read Capacity 16 */
#define CDB_LEN10 10
#define CDB_LEN16 16
-// BMIC commands
+/* BMIC commands */
#define BMIC_READ 0x26
#define BMIC_WRITE 0x27
#define BMIC_CACHE_FLUSH 0xc2
-#define CCISS_CACHE_FLUSH 0x01 //C2 was already being used by CCISS
-
-//Command List Structure
-typedef union _SCSI3Addr_struct {
- struct {
- BYTE Dev;
- BYTE Bus:6;
- BYTE Mode:2; // b00
- } PeripDev;
- struct {
- BYTE DevLSB;
- BYTE DevMSB:6;
- BYTE Mode:2; // b01
- } LogDev;
- struct {
- BYTE Dev:5;
- BYTE Bus:3;
- BYTE Targ:6;
- BYTE Mode:2; // b10
- } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
- DWORD TargetId:24;
- DWORD Bus:6;
- DWORD Mode:2;
- SCSI3Addr_struct Target[2]; //2 level target device addr
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
- DWORD VolId:30;
- DWORD Mode:2;
- BYTE reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
- BYTE LunAddrBytes[8];
- SCSI3Addr_struct SCSI3Lun[4];
- PhysDevAddr_struct PhysDev;
- LogDevAddr_struct LogDev;
-} LUNAddr_struct;
+#define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */
+/* Command List Structure */
#define CTLR_LUNID "\0\0\0\0\0\0\0\0"
typedef struct _CommandListHeader_struct {
QWORD Tag;
LUNAddr_struct LUN;
} CommandListHeader_struct;
-typedef struct _RequestBlock_struct {
- BYTE CDBLen;
- struct {
- BYTE Type:3;
- BYTE Attribute:3;
- BYTE Direction:2;
- } Type;
- HWORD Timeout;
- BYTE CDB[16];
-} RequestBlock_struct;
typedef struct _ErrDescriptor_struct {
QWORD Addr;
DWORD Len;
DWORD Ext;
} SGDescriptor_struct;
-typedef union _MoreErrInfo_struct{
- struct {
- BYTE Reserved[3];
- BYTE Type;
- DWORD ErrorInfo;
- }Common_Info;
- struct{
- BYTE Reserved[2];
- BYTE offense_size;//size of offending entry
- BYTE offense_num; //byte # of offense 0-base
- DWORD offense_value;
- }Invalid_Cmd;
-}MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
- BYTE ScsiStatus;
- BYTE SenseLen;
- HWORD CommandStatus;
- DWORD ResidualCnt;
- MoreErrInfo_struct MoreErrInfo;
- BYTE SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
/* Command types */
#define CMD_RWREQ 0x00
#define CMD_IOCTL_PEND 0x01
char pad[PADSIZE];
} CommandList_struct;
-//Configuration Table Structure
+/* Configuration Table Structure */
typedef struct _HostWrite_struct {
DWORD TransportRequest;
DWORD Reserved;
DWORD MaxPhysicalDrivesPerLogicalUnit;
} CfgTable_struct;
#pragma pack()
-#endif // CCISS_CMD_H
+#endif /* CCISS_CMD_H */
#include <scsi/scsicam.h> /* possibly irrelevant, since we don't show disks */
- // the scsi id of the adapter...
+ /* the scsi id of the adapter... */
#define SELF_SCSI_ID 15
- // 15 is somewhat arbitrary, since the scsi-2 bus
- // that's presented by the driver to the OS is
- // fabricated. The "real" scsi-3 bus the
- // hardware presents is fabricated too.
- // The actual, honest-to-goodness physical
- // bus that the devices are attached to is not
- // addressible natively, and may in fact turn
- // out to be not scsi at all.
+ /* 15 is somewhat arbitrary, since the scsi-2 bus
+ that's presented by the driver to the OS is
+ fabricated. The "real" scsi-3 bus the
+ hardware presents is fabricated too.
+ The actual, honest-to-goodness physical
+ bus that the devices are attached to is not
+ addressible natively, and may in fact turn
+ out to be not scsi at all. */
#define SCSI_CCISS_CAN_QUEUE 2
static void carm_remove_one (struct pci_dev *pdev);
static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-static struct pci_device_id carm_pci_tbl[] = {
+static const struct pci_device_id carm_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x8000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
{ PCI_VENDOR_ID_PROMISE, 0x8002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
{ } /* terminate list */
#define ub_usb_ids usb_storage_usb_ids
#else
-static struct usb_device_id ub_usb_ids[] = {
+static const struct usb_device_id ub_usb_ids[] = {
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
{ }
};
kfree(vblk);
}
-static struct virtio_device_id id_table[] = {
+static const struct virtio_device_id id_table[] = {
{ VIRTIO_ID_BLOCK, VIRTIO_DEV_ANY_ID },
{ 0 },
};
};
-static struct xenbus_device_id blkfront_ids[] = {
+static const struct xenbus_device_id blkfront_ids[] = {
{ "vbd" },
{ "" }
};
}
/* Match table for of_platform binding */
-static struct of_device_id ace_of_match[] __devinitdata = {
+static const struct of_device_id ace_of_match[] __devinitconst = {
{ .compatible = "xlnx,opb-sysace-1.00.b", },
{ .compatible = "xlnx,opb-sysace-1.00.c", },
{ .compatible = "xlnx,xps-sysace-1.00.a", },
pdev = part_to_dev(p);
p->start_sect = start;
- p->alignment_offset = queue_sector_alignment_offset(disk->queue, start);
- p->discard_alignment = queue_sector_discard_alignment(disk->queue,
- start);
+ p->alignment_offset =
+ queue_limit_alignment_offset(&disk->queue->limits, start);
+ p->discard_alignment =
+ queue_limit_discard_alignment(&disk->queue->limits, start);
p->nr_sects = len;
p->partno = partno;
p->policy = get_disk_ro(disk);
#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */
#define QUEUE_FLAG_CQ 16 /* hardware does queuing */
#define QUEUE_FLAG_DISCARD 17 /* supports DISCARD */
+#define QUEUE_FLAG_NOXMERGES 18 /* No extended merges */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_CLUSTER) | \
#define blk_queue_queuing(q) test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags)
#define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
#define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
+#define blk_queue_noxmerges(q) \
+ test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
#define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
#define blk_queue_flushing(q) ((q)->ordseq)
return q->limits.alignment_offset;
}
-static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t offset)
+static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t sector)
{
unsigned int granularity = max(lim->physical_block_size, lim->io_min);
+ unsigned int alignment = (sector << 9) & (granularity - 1);
- offset &= granularity - 1;
- return (granularity + lim->alignment_offset - offset) & (granularity - 1);
-}
-
-static inline int queue_sector_alignment_offset(struct request_queue *q,
- sector_t sector)
-{
- return queue_limit_alignment_offset(&q->limits, sector << 9);
+ return (granularity + lim->alignment_offset - alignment)
+ & (granularity - 1);
}
static inline int bdev_alignment_offset(struct block_device *bdev)
return q->limits.discard_alignment;
}
-static inline int queue_sector_discard_alignment(struct request_queue *q,
- sector_t sector)
+static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector_t sector)
{
- struct queue_limits *lim = &q->limits;
unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1);
return (lim->discard_granularity + lim->discard_alignment - alignment)
--- /dev/null
+#ifndef CCISS_DEFS_H
+#define CCISS_DEFS_H
+
+#include <linux/types.h>
+
+/* general boundary definitions */
+#define SENSEINFOBYTES 32 /* note that this value may vary
+ between host implementations */
+
+/* Command Status value */
+#define CMD_SUCCESS 0x0000
+#define CMD_TARGET_STATUS 0x0001
+#define CMD_DATA_UNDERRUN 0x0002
+#define CMD_DATA_OVERRUN 0x0003
+#define CMD_INVALID 0x0004
+#define CMD_PROTOCOL_ERR 0x0005
+#define CMD_HARDWARE_ERR 0x0006
+#define CMD_CONNECTION_LOST 0x0007
+#define CMD_ABORTED 0x0008
+#define CMD_ABORT_FAILED 0x0009
+#define CMD_UNSOLICITED_ABORT 0x000A
+#define CMD_TIMEOUT 0x000B
+#define CMD_UNABORTABLE 0x000C
+
+/* transfer direction */
+#define XFER_NONE 0x00
+#define XFER_WRITE 0x01
+#define XFER_READ 0x02
+#define XFER_RSVD 0x03
+
+/* task attribute */
+#define ATTR_UNTAGGED 0x00
+#define ATTR_SIMPLE 0x04
+#define ATTR_HEADOFQUEUE 0x05
+#define ATTR_ORDERED 0x06
+#define ATTR_ACA 0x07
+
+/* cdb type */
+#define TYPE_CMD 0x00
+#define TYPE_MSG 0x01
+
+/* Type defs used in the following structs */
+#define BYTE __u8
+#define WORD __u16
+#define HWORD __u16
+#define DWORD __u32
+
+#define CISS_MAX_LUN 1024
+
+#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */
+#define LEVEL3LUN 0
+
+#pragma pack(1)
+
+/* Command List Structure */
+typedef union _SCSI3Addr_struct {
+ struct {
+ BYTE Dev;
+ BYTE Bus:6;
+ BYTE Mode:2; /* b00 */
+ } PeripDev;
+ struct {
+ BYTE DevLSB;
+ BYTE DevMSB:6;
+ BYTE Mode:2; /* b01 */
+ } LogDev;
+ struct {
+ BYTE Dev:5;
+ BYTE Bus:3;
+ BYTE Targ:6;
+ BYTE Mode:2; /* b10 */
+ } LogUnit;
+} SCSI3Addr_struct;
+
+typedef struct _PhysDevAddr_struct {
+ DWORD TargetId:24;
+ DWORD Bus:6;
+ DWORD Mode:2;
+ SCSI3Addr_struct Target[2]; /* 2 level target device addr */
+} PhysDevAddr_struct;
+
+typedef struct _LogDevAddr_struct {
+ DWORD VolId:30;
+ DWORD Mode:2;
+ BYTE reserved[4];
+} LogDevAddr_struct;
+
+typedef union _LUNAddr_struct {
+ BYTE LunAddrBytes[8];
+ SCSI3Addr_struct SCSI3Lun[4];
+ PhysDevAddr_struct PhysDev;
+ LogDevAddr_struct LogDev;
+} LUNAddr_struct;
+
+typedef struct _RequestBlock_struct {
+ BYTE CDBLen;
+ struct {
+ BYTE Type:3;
+ BYTE Attribute:3;
+ BYTE Direction:2;
+ } Type;
+ HWORD Timeout;
+ BYTE CDB[16];
+} RequestBlock_struct;
+
+typedef union _MoreErrInfo_struct{
+ struct {
+ BYTE Reserved[3];
+ BYTE Type;
+ DWORD ErrorInfo;
+ } Common_Info;
+ struct{
+ BYTE Reserved[2];
+ BYTE offense_size; /* size of offending entry */
+ BYTE offense_num; /* byte # of offense 0-base */
+ DWORD offense_value;
+ } Invalid_Cmd;
+} MoreErrInfo_struct;
+typedef struct _ErrorInfo_struct {
+ BYTE ScsiStatus;
+ BYTE SenseLen;
+ HWORD CommandStatus;
+ DWORD ResidualCnt;
+ MoreErrInfo_struct MoreErrInfo;
+ BYTE SenseInfo[SENSEINFOBYTES];
+} ErrorInfo_struct;
+
+#pragma pack()
+
+#endif /* CCISS_DEFS_H */
#include <linux/types.h>
#include <linux/ioctl.h>
+#include <linux/cciss_defs.h>
#define CCISS_IOC_MAGIC 'B'
#define MAX_KMALLOC_SIZE 128000
-#ifndef CCISS_CMD_H
-// This defines are duplicated in cciss_cmd.h in the driver directory
-
-//general boundary definitions
-#define SENSEINFOBYTES 32//note that this value may vary between host implementations
-
-//Command Status value
-#define CMD_SUCCESS 0x0000
-#define CMD_TARGET_STATUS 0x0001
-#define CMD_DATA_UNDERRUN 0x0002
-#define CMD_DATA_OVERRUN 0x0003
-#define CMD_INVALID 0x0004
-#define CMD_PROTOCOL_ERR 0x0005
-#define CMD_HARDWARE_ERR 0x0006
-#define CMD_CONNECTION_LOST 0x0007
-#define CMD_ABORTED 0x0008
-#define CMD_ABORT_FAILED 0x0009
-#define CMD_UNSOLICITED_ABORT 0x000A
-#define CMD_TIMEOUT 0x000B
-#define CMD_UNABORTABLE 0x000C
-
-//transfer direction
-#define XFER_NONE 0x00
-#define XFER_WRITE 0x01
-#define XFER_READ 0x02
-#define XFER_RSVD 0x03
-
-//task attribute
-#define ATTR_UNTAGGED 0x00
-#define ATTR_SIMPLE 0x04
-#define ATTR_HEADOFQUEUE 0x05
-#define ATTR_ORDERED 0x06
-#define ATTR_ACA 0x07
-
-//cdb type
-#define TYPE_CMD 0x00
-#define TYPE_MSG 0x01
-
-// Type defs used in the following structs
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
-
-#define CISS_MAX_LUN 1024
-
-#define LEVEL2LUN 1 // index into Target(x) structure, due to byte swapping
-#define LEVEL3LUN 0
-
-#pragma pack(1)
-
-//Command List Structure
-typedef union _SCSI3Addr_struct {
- struct {
- BYTE Dev;
- BYTE Bus:6;
- BYTE Mode:2; // b00
- } PeripDev;
- struct {
- BYTE DevLSB;
- BYTE DevMSB:6;
- BYTE Mode:2; // b01
- } LogDev;
- struct {
- BYTE Dev:5;
- BYTE Bus:3;
- BYTE Targ:6;
- BYTE Mode:2; // b10
- } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
- DWORD TargetId:24;
- DWORD Bus:6;
- DWORD Mode:2;
- SCSI3Addr_struct Target[2]; //2 level target device addr
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
- DWORD VolId:30;
- DWORD Mode:2;
- BYTE reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
- BYTE LunAddrBytes[8];
- SCSI3Addr_struct SCSI3Lun[4];
- PhysDevAddr_struct PhysDev;
- LogDevAddr_struct LogDev;
-} LUNAddr_struct;
-
-typedef struct _RequestBlock_struct {
- BYTE CDBLen;
- struct {
- BYTE Type:3;
- BYTE Attribute:3;
- BYTE Direction:2;
- } Type;
- HWORD Timeout;
- BYTE CDB[16];
-} RequestBlock_struct;
-
-typedef union _MoreErrInfo_struct{
- struct {
- BYTE Reserved[3];
- BYTE Type;
- DWORD ErrorInfo;
- }Common_Info;
- struct{
- BYTE Reserved[2];
- BYTE offense_size;//size of offending entry
- BYTE offense_num; //byte # of offense 0-base
- DWORD offense_value;
- }Invalid_Cmd;
-}MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
- BYTE ScsiStatus;
- BYTE SenseLen;
- HWORD CommandStatus;
- DWORD ResidualCnt;
- MoreErrInfo_struct MoreErrInfo;
- BYTE SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
-#pragma pack()
-#endif /* CCISS_CMD_H */
-
typedef struct _IOCTL_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
projects / cascardo / linux.git / commitdiff