ARM: dts: mxs: add enet_out clock to devicetree

Put the clock to the devicetree, so the driver can take care of it
later. Then, we don't have to do the enabling as a workaround in board
init.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
[shawn.guo: add enet_out into imx28.dtsi and overwrite it for m28evk]
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 6ce3d17..3d2e1a4 100644 (file)
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -221,6 +221,8 @@
                        phy-mode = "rmii";
                        pinctrl-names = "default";
                        pinctrl-0 = <&mac0_pins_a>;
+                       clocks = <&clks 57>, <&clks 57>;
+                       clock-names = "ipg", "ahb";
                        status = "okay";
                };
 

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 64af238..9a7adaa 100644 (file)
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -943,8 +943,8 @@
                        compatible = "fsl,imx28-fec";
                        reg = <0x800f0000 0x4000>;
                        interrupts = <101>;
-                       clocks = <&clks 57>, <&clks 57>;
-                       clock-names = "ipg", "ahb";
+                       clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+                       clock-names = "ipg", "ahb", "enet_out";
                        status = "disabled";
                };