MODULE_LICENSE("GPL");
MODULE_ALIAS("iwl4965");
+void il4965_check_abort_status(struct il_priv *il,
+ u8 frame_count, u32 status)
+{
+ if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
+ IL_ERR("Tx flush command to flush out all frames\n");
+ if (!test_bit(STATUS_EXIT_PENDING, &il->status))
+ queue_work(il->workqueue, &il->tx_flush);
+ }
+}
+
+/*
+ * EEPROM
+ */
+struct il_mod_params il4965_mod_params = {
+ .amsdu_size_8K = 1,
+ .restart_fw = 1,
+ /* the rest are 0 by default */
+};
+
+void il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ unsigned long flags;
+ int i;
+ spin_lock_irqsave(&rxq->lock, flags);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+ /* In the reset function, these buffers may have been allocated
+ * to an SKB, so we need to unmap and free potential storage */
+ if (rxq->pool[i].page != NULL) {
+ pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __il_free_pages(il, rxq->pool[i].page);
+ rxq->pool[i].page = NULL;
+ }
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+ }
+
+ for (i = 0; i < RX_QUEUE_SIZE; i++)
+ rxq->queue[i] = NULL;
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->write_actual = 0;
+ rxq->free_count = 0;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
+int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ u32 rb_size;
+ const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
+ u32 rb_timeout = 0;
+
+ if (il->cfg->mod_params->amsdu_size_8K)
+ rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
+ else
+ rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
+
+ /* Stop Rx DMA */
+ il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
+
+ /* Reset driver's Rx queue write idx */
+ il_wr(il, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
+
+ /* Tell device where to find RBD circular buffer in DRAM */
+ il_wr(il, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
+ (u32)(rxq->bd_dma >> 8));
+
+ /* Tell device where in DRAM to update its Rx status */
+ il_wr(il, FH_RSCSR_CHNL0_STTS_WPTR_REG,
+ rxq->rb_stts_dma >> 4);
+
+ /* Enable Rx DMA
+ * Direct rx interrupts to hosts
+ * Rx buffer size 4 or 8k
+ * RB timeout 0x10
+ * 256 RBDs
+ */
+ il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG,
+ FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
+ FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
+ FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
+ rb_size|
+ (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
+ (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
+
+ /* Set interrupt coalescing timer to default (2048 usecs) */
+ il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF);
+
+ return 0;
+}
+
+static void il4965_set_pwr_vmain(struct il_priv *il)
+{
+/*
+ * (for documentation purposes)
+ * to set power to V_AUX, do:
+
+ if (pci_pme_capable(il->pci_dev, PCI_D3cold))
+ il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+ */
+
+ il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+}
+
+int il4965_hw_nic_init(struct il_priv *il)
+{
+ unsigned long flags;
+ struct il_rx_queue *rxq = &il->rxq;
+ int ret;
+
+ /* nic_init */
+ spin_lock_irqsave(&il->lock, flags);
+ il->cfg->ops->lib->apm_ops.init(il);
+
+ /* Set interrupt coalescing calibration timer to default (512 usecs) */
+ il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF);
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ il4965_set_pwr_vmain(il);
+
+ il->cfg->ops->lib->apm_ops.config(il);
+
+ /* Allocate the RX queue, or reset if it is already allocated */
+ if (!rxq->bd) {
+ ret = il_rx_queue_alloc(il);
+ if (ret) {
+ IL_ERR("Unable to initialize Rx queue\n");
+ return -ENOMEM;
+ }
+ } else
+ il4965_rx_queue_reset(il, rxq);
+
+ il4965_rx_replenish(il);
+
+ il4965_rx_init(il, rxq);
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ rxq->need_update = 1;
+ il_rx_queue_update_write_ptr(il, rxq);
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ /* Allocate or reset and init all Tx and Command queues */
+ if (!il->txq) {
+ ret = il4965_txq_ctx_alloc(il);
+ if (ret)
+ return ret;
+ } else
+ il4965_txq_ctx_reset(il);
+
+ set_bit(STATUS_INIT, &il->status);
+
+ return 0;
+}
+
+/**
+ * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32 il4965_dma_addr2rbd_ptr(struct il_priv *il,
+ dma_addr_t dma_addr)
+{
+ return cpu_to_le32((u32)(dma_addr >> 8));
+}
+
+/**
+ * il4965_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' idx forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+void il4965_rx_queue_restock(struct il_priv *il)
+{
+ struct il_rx_queue *rxq = &il->rxq;
+ struct list_head *element;
+ struct il_rx_buf *rxb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
+ /* The overwritten rxb must be a used one */
+ rxb = rxq->queue[rxq->write];
+ BUG_ON(rxb && rxb->page);
+
+ /* Get next free Rx buffer, remove from free list */
+ element = rxq->rx_free.next;
+ rxb = list_entry(element, struct il_rx_buf, list);
+ list_del(element);
+
+ /* Point to Rx buffer via next RBD in circular buffer */
+ rxq->bd[rxq->write] = il4965_dma_addr2rbd_ptr(il,
+ rxb->page_dma);
+ rxq->queue[rxq->write] = rxb;
+ rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+ rxq->free_count--;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ /* If the pre-allocated buffer pool is dropping low, schedule to
+ * refill it */
+ if (rxq->free_count <= RX_LOW_WATERMARK)
+ queue_work(il->workqueue, &il->rx_replenish);
+
+
+ /* If we've added more space for the firmware to place data, tell it.
+ * Increment device's write pointer in multiples of 8. */
+ if (rxq->write_actual != (rxq->write & ~0x7)) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ rxq->need_update = 1;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ il_rx_queue_update_write_ptr(il, rxq);
+ }
+}
+
+/**
+ * il4965_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via il_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+static void il4965_rx_allocate(struct il_priv *il, gfp_t priority)
+{
+ struct il_rx_queue *rxq = &il->rxq;
+ struct list_head *element;
+ struct il_rx_buf *rxb;
+ struct page *page;
+ unsigned long flags;
+ gfp_t gfp_mask = priority;
+
+ while (1) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ gfp_mask |= __GFP_NOWARN;
+
+ if (il->hw_params.rx_page_order > 0)
+ gfp_mask |= __GFP_COMP;
+
+ /* Alloc a new receive buffer */
+ page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
+ if (!page) {
+ if (net_ratelimit())
+ D_INFO("alloc_pages failed, "
+ "order: %d\n",
+ il->hw_params.rx_page_order);
+
+ if (rxq->free_count <= RX_LOW_WATERMARK &&
+ net_ratelimit())
+ IL_ERR(
+ "Failed to alloc_pages with %s. "
+ "Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ?
+ "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
+ /* We don't reschedule replenish work here -- we will
+ * call the restock method and if it still needs
+ * more buffers it will schedule replenish */
+ return;
+ }
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ __free_pages(page, il->hw_params.rx_page_order);
+ return;
+ }
+ element = rxq->rx_used.next;
+ rxb = list_entry(element, struct il_rx_buf, list);
+ list_del(element);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ BUG_ON(rxb->page);
+ rxb->page = page;
+ /* Get physical address of the RB */
+ rxb->page_dma = pci_map_page(il->pci_dev, page, 0,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ /* dma address must be no more than 36 bits */
+ BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
+ /* and also 256 byte aligned! */
+ BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ il->alloc_rxb_page++;
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ }
+}
+
+void il4965_rx_replenish(struct il_priv *il)
+{
+ unsigned long flags;
+
+ il4965_rx_allocate(il, GFP_KERNEL);
+
+ spin_lock_irqsave(&il->lock, flags);
+ il4965_rx_queue_restock(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+}
+
+void il4965_rx_replenish_now(struct il_priv *il)
+{
+ il4965_rx_allocate(il, GFP_ATOMIC);
+
+ il4965_rx_queue_restock(il);
+}
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+void il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ int i;
+ for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+ if (rxq->pool[i].page != NULL) {
+ pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __il_free_pages(il, rxq->pool[i].page);
+ rxq->pool[i].page = NULL;
+ }
+ }
+
+ dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+ rxq->bd_dma);
+ dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
+ rxq->rb_stts, rxq->rb_stts_dma);
+ rxq->bd = NULL;
+ rxq->rb_stts = NULL;
+}
+
+int il4965_rxq_stop(struct il_priv *il)
+{
+
+ /* stop Rx DMA */
+ il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
+ il_poll_bit(il, FH_MEM_RSSR_RX_STATUS_REG,
+ FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
+
+ return 0;
+}
+
+int il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
+{
+ int idx = 0;
+ int band_offset = 0;
+
+ /* HT rate format: mac80211 wants an MCS number, which is just LSB */
+ if (rate_n_flags & RATE_MCS_HT_MSK) {
+ idx = (rate_n_flags & 0xff);
+ return idx;
+ /* Legacy rate format, search for match in table */
+ } else {
+ if (band == IEEE80211_BAND_5GHZ)
+ band_offset = IL_FIRST_OFDM_RATE;
+ for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++)
+ if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
+ return idx - band_offset;
+ }
+
+ return -1;
+}
+
+static int il4965_calc_rssi(struct il_priv *il,
+ struct il_rx_phy_res *rx_resp)
+{
+ /* data from PHY/DSP regarding signal strength, etc.,
+ * contents are always there, not configurable by host. */
+ struct il4965_rx_non_cfg_phy *ncphy =
+ (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
+ u32 agc = (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK)
+ >> IL49_AGC_DB_POS;
+
+ u32 valid_antennae =
+ (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK)
+ >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
+ u8 max_rssi = 0;
+ u32 i;
+
+ /* Find max rssi among 3 possible receivers.
+ * These values are measured by the digital signal processor (DSP).
+ * They should stay fairly constant even as the signal strength varies,
+ * if the radio's automatic gain control (AGC) is working right.
+ * AGC value (see below) will provide the "interesting" info. */
+ for (i = 0; i < 3; i++)
+ if (valid_antennae & (1 << i))
+ max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
+
+ D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+ ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
+ max_rssi, agc);
+
+ /* dBm = max_rssi dB - agc dB - constant.
+ * Higher AGC (higher radio gain) means lower signal. */
+ return max_rssi - agc - IL4965_RSSI_OFFSET;
+}
+
+
+static u32 il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in)
+{
+ u32 decrypt_out = 0;
+
+ if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
+ RX_RES_STATUS_STATION_FOUND)
+ decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
+ RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
+
+ decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
+
+ /* packet was not encrypted */
+ if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
+ RX_RES_STATUS_SEC_TYPE_NONE)
+ return decrypt_out;
+
+ /* packet was encrypted with unknown alg */
+ if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
+ RX_RES_STATUS_SEC_TYPE_ERR)
+ return decrypt_out;
+
+ /* decryption was not done in HW */
+ if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
+ RX_MPDU_RES_STATUS_DEC_DONE_MSK)
+ return decrypt_out;
+
+ switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
+
+ case RX_RES_STATUS_SEC_TYPE_CCMP:
+ /* alg is CCM: check MIC only */
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
+ /* Bad MIC */
+ decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
+ else
+ decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
+
+ break;
+
+ case RX_RES_STATUS_SEC_TYPE_TKIP:
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
+ /* Bad TTAK */
+ decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
+ break;
+ }
+ /* fall through if TTAK OK */
+ default:
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
+ decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
+ else
+ decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
+ break;
+ }
+
+ D_RX("decrypt_in:0x%x decrypt_out = 0x%x\n",
+ decrypt_in, decrypt_out);
+
+ return decrypt_out;
+}
+
+static void il4965_pass_packet_to_mac80211(struct il_priv *il,
+ struct ieee80211_hdr *hdr,
+ u16 len,
+ u32 ampdu_status,
+ struct il_rx_buf *rxb,
+ struct ieee80211_rx_status *stats)
+{
+ struct sk_buff *skb;
+ __le16 fc = hdr->frame_control;
+
+ /* We only process data packets if the interface is open */
+ if (unlikely(!il->is_open)) {
+ D_DROP(
+ "Dropping packet while interface is not open.\n");
+ return;
+ }
+
+ /* In case of HW accelerated crypto and bad decryption, drop */
+ if (!il->cfg->mod_params->sw_crypto &&
+ il_set_decrypted_flag(il, hdr, ampdu_status, stats))
+ return;
+
+ skb = dev_alloc_skb(128);
+ if (!skb) {
+ IL_ERR("dev_alloc_skb failed\n");
+ return;
+ }
+
+ skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
+
+ il_update_stats(il, false, fc, len);
+ memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+ ieee80211_rx(il->hw, skb);
+ il->alloc_rxb_page--;
+ rxb->page = NULL;
+}
+
+/* Called for REPLY_RX (legacy ABG frames), or
+ * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
+void il4965_rx_reply_rx(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct ieee80211_hdr *header;
+ struct ieee80211_rx_status rx_status;
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_rx_phy_res *phy_res;
+ __le32 rx_pkt_status;
+ struct il_rx_mpdu_res_start *amsdu;
+ u32 len;
+ u32 ampdu_status;
+ u32 rate_n_flags;
+
+ /**
+ * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
+ * REPLY_RX: physical layer info is in this buffer
+ * REPLY_RX_MPDU_CMD: physical layer info was sent in separate
+ * command and cached in il->last_phy_res
+ *
+ * Here we set up local variables depending on which command is
+ * received.
+ */
+ if (pkt->hdr.cmd == REPLY_RX) {
+ phy_res = (struct il_rx_phy_res *)pkt->u.raw;
+ header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
+ + phy_res->cfg_phy_cnt);
+
+ len = le16_to_cpu(phy_res->byte_count);
+ rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
+ phy_res->cfg_phy_cnt + len);
+ ampdu_status = le32_to_cpu(rx_pkt_status);
+ } else {
+ if (!il->_4965.last_phy_res_valid) {
+ IL_ERR("MPDU frame without cached PHY data\n");
+ return;
+ }
+ phy_res = &il->_4965.last_phy_res;
+ amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw;
+ header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
+ len = le16_to_cpu(amsdu->byte_count);
+ rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
+ ampdu_status = il4965_translate_rx_status(il,
+ le32_to_cpu(rx_pkt_status));
+ }
+
+ if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
+ D_DROP("dsp size out of range [0,20]: %d/n",
+ phy_res->cfg_phy_cnt);
+ return;
+ }
+
+ if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
+ !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+ D_RX("Bad CRC or FIFO: 0x%08X.\n",
+ le32_to_cpu(rx_pkt_status));
+ return;
+ }
+
+ /* This will be used in several places later */
+ rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
+
+ /* rx_status carries information about the packet to mac80211 */
+ rx_status.mactime = le64_to_cpu(phy_res->timestamp);
+ rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
+ IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+ rx_status.freq =
+ ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
+ rx_status.band);
+ rx_status.rate_idx =
+ il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
+ rx_status.flag = 0;
+
+ /* TSF isn't reliable. In order to allow smooth user experience,
+ * this W/A doesn't propagate it to the mac80211 */
+ /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/
+
+ il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
+
+ /* Find max signal strength (dBm) among 3 antenna/receiver chains */
+ rx_status.signal = il4965_calc_rssi(il, phy_res);
+
+ il_dbg_log_rx_data_frame(il, len, header);
+ D_STATS("Rssi %d, TSF %llu\n",
+ rx_status.signal, (unsigned long long)rx_status.mactime);
+
+ /*
+ * "antenna number"
+ *
+ * It seems that the antenna field in the phy flags value
+ * is actually a bit field. This is undefined by radiotap,
+ * it wants an actual antenna number but I always get "7"
+ * for most legacy frames I receive indicating that the
+ * same frame was received on all three RX chains.
+ *
+ * I think this field should be removed in favor of a
+ * new 802.11n radiotap field "RX chains" that is defined
+ * as a bitmask.
+ */
+ rx_status.antenna =
+ (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
+ >> RX_RES_PHY_FLAGS_ANTENNA_POS;
+
+ /* set the preamble flag if appropriate */
+ if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+
+ /* Set up the HT phy flags */
+ if (rate_n_flags & RATE_MCS_HT_MSK)
+ rx_status.flag |= RX_FLAG_HT;
+ if (rate_n_flags & RATE_MCS_HT40_MSK)
+ rx_status.flag |= RX_FLAG_40MHZ;
+ if (rate_n_flags & RATE_MCS_SGI_MSK)
+ rx_status.flag |= RX_FLAG_SHORT_GI;
+
+ il4965_pass_packet_to_mac80211(il, header, len, ampdu_status,
+ rxb, &rx_status);
+}
+
+/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
+ * This will be used later in il_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
+void il4965_rx_reply_rx_phy(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ il->_4965.last_phy_res_valid = true;
+ memcpy(&il->_4965.last_phy_res, pkt->u.raw,
+ sizeof(struct il_rx_phy_res));
+}
+
+static int il4965_get_channels_for_scan(struct il_priv *il,
+ struct ieee80211_vif *vif,
+ enum ieee80211_band band,
+ u8 is_active, u8 n_probes,
+ struct il_scan_channel *scan_ch)
+{
+ struct ieee80211_channel *chan;
+ const struct ieee80211_supported_band *sband;
+ const struct il_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added, i;
+ u16 channel;
+
+ sband = il_get_hw_mode(il, band);
+ if (!sband)
+ return 0;
+
+ active_dwell = il_get_active_dwell_time(il, band, n_probes);
+ passive_dwell = il_get_passive_dwell_time(il, band, vif);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+ for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
+ chan = il->scan_request->channels[i];
+
+ if (chan->band != band)
+ continue;
+
+ channel = chan->hw_value;
+ scan_ch->channel = cpu_to_le16(channel);
+
+ ch_info = il_get_channel_info(il, band, channel);
+ if (!il_is_channel_valid(ch_info)) {
+ D_SCAN(
+ "Channel %d is INVALID for this band.\n",
+ channel);
+ continue;
+ }
+
+ if (!is_active || il_is_channel_passive(ch_info) ||
+ (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+ else
+ scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
+
+ if (n_probes)
+ scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes);
+
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+
+ /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+ * power level:
+ * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ */
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+ D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n",
+ channel, le32_to_cpu(scan_ch->type),
+ (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+ "ACTIVE" : "PASSIVE",
+ (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+ active_dwell : passive_dwell);
+
+ scan_ch++;
+ added++;
+ }
+
+ D_SCAN("total channels to scan %d\n", added);
+ return added;
+}
+
+int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
+{
+ struct il_host_cmd cmd = {
+ .id = REPLY_SCAN_CMD,
+ .len = sizeof(struct il_scan_cmd),
+ .flags = CMD_SIZE_HUGE,
+ };
+ struct il_scan_cmd *scan;
+ struct il_rxon_context *ctx = &il->ctx;
+ u32 rate_flags = 0;
+ u16 cmd_len;
+ u16 rx_chain = 0;
+ enum ieee80211_band band;
+ u8 n_probes = 0;
+ u8 rx_ant = il->hw_params.valid_rx_ant;
+ u8 rate;
+ bool is_active = false;
+ int chan_mod;
+ u8 active_chains;
+ u8 scan_tx_antennas = il->hw_params.valid_tx_ant;
+ int ret;
+
+ lockdep_assert_held(&il->mutex);
+
+ if (vif)
+ ctx = il_rxon_ctx_from_vif(vif);
+
+ if (!il->scan_cmd) {
+ il->scan_cmd = kmalloc(sizeof(struct il_scan_cmd) +
+ IL_MAX_SCAN_SIZE, GFP_KERNEL);
+ if (!il->scan_cmd) {
+ D_SCAN(
+ "fail to allocate memory for scan\n");
+ return -ENOMEM;
+ }
+ }
+ scan = il->scan_cmd;
+ memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE);
+
+ scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
+ scan->quiet_time = IL_ACTIVE_QUIET_TIME;
+
+ if (il_is_any_associated(il)) {
+ u16 interval;
+ u32 extra;
+ u32 suspend_time = 100;
+ u32 scan_suspend_time = 100;
+
+ D_INFO("Scanning while associated...\n");
+ interval = vif->bss_conf.beacon_int;
+
+ scan->suspend_time = 0;
+ scan->max_out_time = cpu_to_le32(200 * 1024);
+ if (!interval)
+ interval = suspend_time;
+
+ extra = (suspend_time / interval) << 22;
+ scan_suspend_time = (extra |
+ ((suspend_time % interval) * 1024));
+ scan->suspend_time = cpu_to_le32(scan_suspend_time);
+ D_SCAN("suspend_time 0x%X beacon interval %d\n",
+ scan_suspend_time, interval);
+ }
+
+ if (il->scan_request->n_ssids) {
+ int i, p = 0;
+ D_SCAN("Kicking off active scan\n");
+ for (i = 0; i < il->scan_request->n_ssids; i++) {
+ /* always does wildcard anyway */
+ if (!il->scan_request->ssids[i].ssid_len)
+ continue;
+ scan->direct_scan[p].id = WLAN_EID_SSID;
+ scan->direct_scan[p].len =
+ il->scan_request->ssids[i].ssid_len;
+ memcpy(scan->direct_scan[p].ssid,
+ il->scan_request->ssids[i].ssid,
+ il->scan_request->ssids[i].ssid_len);
+ n_probes++;
+ p++;
+ }
+ is_active = true;
+ } else
+ D_SCAN("Start passive scan.\n");
+
+ scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+ scan->tx_cmd.sta_id = ctx->bcast_sta_id;
+ scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ switch (il->scan_band) {
+ case IEEE80211_BAND_2GHZ:
+ scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+ chan_mod = le32_to_cpu(
+ il->ctx.active.flags &
+ RXON_FLG_CHANNEL_MODE_MSK)
+ >> RXON_FLG_CHANNEL_MODE_POS;
+ if (chan_mod == CHANNEL_MODE_PURE_40) {
+ rate = RATE_6M_PLCP;
+ } else {
+ rate = RATE_1M_PLCP;
+ rate_flags = RATE_MCS_CCK_MSK;
+ }
+ break;
+ case IEEE80211_BAND_5GHZ:
+ rate = RATE_6M_PLCP;
+ break;
+ default:
+ IL_WARN("Invalid scan band\n");
+ return -EIO;
+ }
+
+ /*
+ * If active scanning is requested but a certain channel is
+ * marked passive, we can do active scanning if we detect
+ * transmissions.
+ *
+ * There is an issue with some firmware versions that triggers
+ * a sysassert on a "good CRC threshold" of zero (== disabled),
+ * on a radar channel even though this means that we should NOT
+ * send probes.
+ *
+ * The "good CRC threshold" is the number of frames that we
+ * need to receive during our dwell time on a channel before
+ * sending out probes -- setting this to a huge value will
+ * mean we never reach it, but at the same time work around
+ * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER
+ * here instead of IL_GOOD_CRC_TH_DISABLED.
+ */
+ scan->good_CRC_th = is_active ? IL_GOOD_CRC_TH_DEFAULT :
+ IL_GOOD_CRC_TH_NEVER;
+
+ band = il->scan_band;
+
+ if (il->cfg->scan_rx_antennas[band])
+ rx_ant = il->cfg->scan_rx_antennas[band];
+
+ il->scan_tx_ant[band] = il4965_toggle_tx_ant(il,
+ il->scan_tx_ant[band],
+ scan_tx_antennas);
+ rate_flags |= il4965_ant_idx_to_flags(il->scan_tx_ant[band]);
+ scan->tx_cmd.rate_n_flags = il4965_hw_set_rate_n_flags(rate, rate_flags);
+
+ /* In power save mode use one chain, otherwise use all chains */
+ if (test_bit(STATUS_POWER_PMI, &il->status)) {
+ /* rx_ant has been set to all valid chains previously */
+ active_chains = rx_ant &
+ ((u8)(il->chain_noise_data.active_chains));
+ if (!active_chains)
+ active_chains = rx_ant;
+
+ D_SCAN("chain_noise_data.active_chains: %u\n",
+ il->chain_noise_data.active_chains);
+
+ rx_ant = il4965_first_antenna(active_chains);
+ }
+
+ /* MIMO is not used here, but value is required */
+ rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+ rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+ scan->rx_chain = cpu_to_le16(rx_chain);
+
+ cmd_len = il_fill_probe_req(il,
+ (struct ieee80211_mgmt *)scan->data,
+ vif->addr,
+ il->scan_request->ie,
+ il->scan_request->ie_len,
+ IL_MAX_SCAN_SIZE - sizeof(*scan));
+ scan->tx_cmd.len = cpu_to_le16(cmd_len);
+
+ scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+ RXON_FILTER_BCON_AWARE_MSK);
+
+ scan->channel_count = il4965_get_channels_for_scan(il, vif, band,
+ is_active, n_probes,
+ (void *)&scan->data[cmd_len]);
+ if (scan->channel_count == 0) {
+ D_SCAN("channel count %d\n", scan->channel_count);
+ return -EIO;
+ }
+
+ cmd.len += le16_to_cpu(scan->tx_cmd.len) +
+ scan->channel_count * sizeof(struct il_scan_channel);
+ cmd.data = scan;
+ scan->len = cpu_to_le16(cmd.len);
+
+ set_bit(STATUS_SCAN_HW, &il->status);
+
+ ret = il_send_cmd_sync(il, &cmd);
+ if (ret)
+ clear_bit(STATUS_SCAN_HW, &il->status);
+
+ return ret;
+}
+
+int il4965_manage_ibss_station(struct il_priv *il,
+ struct ieee80211_vif *vif, bool add)
+{
+ struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+ if (add)
+ return il4965_add_bssid_station(il, vif_priv->ctx,
+ vif->bss_conf.bssid,
+ &vif_priv->ibss_bssid_sta_id);
+ return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
+ vif->bss_conf.bssid);
+}
+
+void il4965_free_tfds_in_queue(struct il_priv *il,
+ int sta_id, int tid, int freed)
+{
+ lockdep_assert_held(&il->sta_lock);
+
+ if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed)
+ il->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ else {
+ D_TX("free more than tfds_in_queue (%u:%d)\n",
+ il->stations[sta_id].tid[tid].tfds_in_queue,
+ freed);
+ il->stations[sta_id].tid[tid].tfds_in_queue = 0;
+ }
+}
+
+#define IL_TX_QUEUE_MSK 0xfffff
+
+static bool il4965_is_single_rx_stream(struct il_priv *il)
+{
+ return il->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
+ il->current_ht_config.single_chain_sufficient;
+}
+
+#define IL_NUM_RX_CHAINS_MULTIPLE 3
+#define IL_NUM_RX_CHAINS_SINGLE 2
+#define IL_NUM_IDLE_CHAINS_DUAL 2
+#define IL_NUM_IDLE_CHAINS_SINGLE 1
+
+/*
+ * Determine how many receiver/antenna chains to use.
+ *
+ * More provides better reception via diversity. Fewer saves power
+ * at the expense of throughput, but only when not in powersave to
+ * start with.
+ *
+ * MIMO (dual stream) requires at least 2, but works better with 3.
+ * This does not determine *which* chains to use, just how many.
+ */
+static int il4965_get_active_rx_chain_count(struct il_priv *il)
+{
+ /* # of Rx chains to use when expecting MIMO. */
+ if (il4965_is_single_rx_stream(il))
+ return IL_NUM_RX_CHAINS_SINGLE;
+ else
+ return IL_NUM_RX_CHAINS_MULTIPLE;
+}
+
+/*
+ * When we are in power saving mode, unless device support spatial
+ * multiplexing power save, use the active count for rx chain count.
+ */
+static int
+il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt)
+{
+ /* # Rx chains when idling, depending on SMPS mode */
+ switch (il->current_ht_config.smps) {
+ case IEEE80211_SMPS_STATIC:
+ case IEEE80211_SMPS_DYNAMIC:
+ return IL_NUM_IDLE_CHAINS_SINGLE;
+ case IEEE80211_SMPS_OFF:
+ return active_cnt;
+ default:
+ WARN(1, "invalid SMPS mode %d",
+ il->current_ht_config.smps);
+ return active_cnt;
+ }
+}
+
+/* up to 4 chains */
+static u8 il4965_count_chain_bitmap(u32 chain_bitmap)
+{
+ u8 res;
+ res = (chain_bitmap & BIT(0)) >> 0;
+ res += (chain_bitmap & BIT(1)) >> 1;
+ res += (chain_bitmap & BIT(2)) >> 2;
+ res += (chain_bitmap & BIT(3)) >> 3;
+ return res;
+}
+
+/**
+ * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
+ *
+ * Selects how many and which Rx receivers/antennas/chains to use.
+ * This should not be used for scan command ... it puts data in wrong place.
+ */
+void il4965_set_rxon_chain(struct il_priv *il, struct il_rxon_context *ctx)
+{
+ bool is_single = il4965_is_single_rx_stream(il);
+ bool is_cam = !test_bit(STATUS_POWER_PMI, &il->status);
+ u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
+ u32 active_chains;
+ u16 rx_chain;
+
+ /* Tell uCode which antennas are actually connected.
+ * Before first association, we assume all antennas are connected.
+ * Just after first association, il4965_chain_noise_calibration()
+ * checks which antennas actually *are* connected. */
+ if (il->chain_noise_data.active_chains)
+ active_chains = il->chain_noise_data.active_chains;
+ else
+ active_chains = il->hw_params.valid_rx_ant;
+
+ rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
+
+ /* How many receivers should we use? */
+ active_rx_cnt = il4965_get_active_rx_chain_count(il);
+ idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt);
+
+
+ /* correct rx chain count according hw settings
+ * and chain noise calibration
+ */
+ valid_rx_cnt = il4965_count_chain_bitmap(active_chains);
+ if (valid_rx_cnt < active_rx_cnt)
+ active_rx_cnt = valid_rx_cnt;
+
+ if (valid_rx_cnt < idle_rx_cnt)
+ idle_rx_cnt = valid_rx_cnt;
+
+ rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+ rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
+
+ ctx->staging.rx_chain = cpu_to_le16(rx_chain);
+
+ if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam)
+ ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
+ else
+ ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
+
+ D_ASSOC("rx_chain=0x%X active=%d idle=%d\n",
+ ctx->staging.rx_chain,
+ active_rx_cnt, idle_rx_cnt);
+
+ WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+ active_rx_cnt < idle_rx_cnt);
+}
+
+u8 il4965_toggle_tx_ant(struct il_priv *il, u8 ant, u8 valid)
+{
+ int i;
+ u8 ind = ant;
+
+ for (i = 0; i < RATE_ANT_NUM - 1; i++) {
+ ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
+ if (valid & BIT(ind))
+ return ind;
+ }
+ return ant;
+}
+
+static const char *il4965_get_fh_string(int cmd)
+{
+ switch (cmd) {
+ IL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG);
+ IL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG);
+ IL_CMD(FH_RSCSR_CHNL0_WPTR);
+ IL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG);
+ IL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG);
+ IL_CMD(FH_MEM_RSSR_RX_STATUS_REG);
+ IL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
+ IL_CMD(FH_TSSR_TX_STATUS_REG);
+ IL_CMD(FH_TSSR_TX_ERROR_REG);
+ default:
+ return "UNKNOWN";
+ }
+}
+
+int il4965_dump_fh(struct il_priv *il, char **buf, bool display)
+{
+ int i;
+#ifdef CONFIG_IWLEGACY_DEBUG
+ int pos = 0;
+ size_t bufsz = 0;
+#endif
+ static const u32 fh_tbl[] = {
+ FH_RSCSR_CHNL0_STTS_WPTR_REG,
+ FH_RSCSR_CHNL0_RBDCB_BASE_REG,
+ FH_RSCSR_CHNL0_WPTR,
+ FH_MEM_RCSR_CHNL0_CONFIG_REG,
+ FH_MEM_RSSR_SHARED_CTRL_REG,
+ FH_MEM_RSSR_RX_STATUS_REG,
+ FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
+ FH_TSSR_TX_STATUS_REG,
+ FH_TSSR_TX_ERROR_REG
+ };
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (display) {
+ bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+ *buf = kmalloc(bufsz, GFP_KERNEL);
+ if (!*buf)
+ return -ENOMEM;
+ pos += scnprintf(*buf + pos, bufsz - pos,
+ "FH register values:\n");
+ for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+ pos += scnprintf(*buf + pos, bufsz - pos,
+ " %34s: 0X%08x\n",
+ il4965_get_fh_string(fh_tbl[i]),
+ il_rd(il, fh_tbl[i]));
+ }
+ return pos;
+ }
+#endif
+ IL_ERR("FH register values:\n");
+ for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+ IL_ERR(" %34s: 0X%08x\n",
+ il4965_get_fh_string(fh_tbl[i]),
+ il_rd(il, fh_tbl[i]));
+ }
+ return 0;
+}
void il4965_rx_missed_beacon_notif(struct il_priv *il,
struct il_rx_buf *rxb)
+++ /dev/null
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-#include <linux/etherdevice.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-#include "iwl-4965-hw.h"
-#include "iwl-4965.h"
-#include "iwl-sta.h"
-
-void il4965_check_abort_status(struct il_priv *il,
- u8 frame_count, u32 status)
-{
- if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
- IL_ERR("Tx flush command to flush out all frames\n");
- if (!test_bit(STATUS_EXIT_PENDING, &il->status))
- queue_work(il->workqueue, &il->tx_flush);
- }
-}
-
-/*
- * EEPROM
- */
-struct il_mod_params il4965_mod_params = {
- .amsdu_size_8K = 1,
- .restart_fw = 1,
- /* the rest are 0 by default */
-};
-
-void il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
-{
- unsigned long flags;
- int i;
- spin_lock_irqsave(&rxq->lock, flags);
- INIT_LIST_HEAD(&rxq->rx_free);
- INIT_LIST_HEAD(&rxq->rx_used);
- /* Fill the rx_used queue with _all_ of the Rx buffers */
- for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
- /* In the reset function, these buffers may have been allocated
- * to an SKB, so we need to unmap and free potential storage */
- if (rxq->pool[i].page != NULL) {
- pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
- PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- __il_free_pages(il, rxq->pool[i].page);
- rxq->pool[i].page = NULL;
- }
- list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
- }
-
- for (i = 0; i < RX_QUEUE_SIZE; i++)
- rxq->queue[i] = NULL;
-
- /* Set us so that we have processed and used all buffers, but have
- * not restocked the Rx queue with fresh buffers */
- rxq->read = rxq->write = 0;
- rxq->write_actual = 0;
- rxq->free_count = 0;
- spin_unlock_irqrestore(&rxq->lock, flags);
-}
-
-int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
-{
- u32 rb_size;
- const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
- u32 rb_timeout = 0;
-
- if (il->cfg->mod_params->amsdu_size_8K)
- rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
- else
- rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
-
- /* Stop Rx DMA */
- il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
-
- /* Reset driver's Rx queue write idx */
- il_wr(il, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
-
- /* Tell device where to find RBD circular buffer in DRAM */
- il_wr(il, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
- (u32)(rxq->bd_dma >> 8));
-
- /* Tell device where in DRAM to update its Rx status */
- il_wr(il, FH_RSCSR_CHNL0_STTS_WPTR_REG,
- rxq->rb_stts_dma >> 4);
-
- /* Enable Rx DMA
- * Direct rx interrupts to hosts
- * Rx buffer size 4 or 8k
- * RB timeout 0x10
- * 256 RBDs
- */
- il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG,
- FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
- FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
- FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
- rb_size|
- (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
- (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
-
- /* Set interrupt coalescing timer to default (2048 usecs) */
- il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF);
-
- return 0;
-}
-
-static void il4965_set_pwr_vmain(struct il_priv *il)
-{
-/*
- * (for documentation purposes)
- * to set power to V_AUX, do:
-
- if (pci_pme_capable(il->pci_dev, PCI_D3cold))
- il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
- */
-
- il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
-}
-
-int il4965_hw_nic_init(struct il_priv *il)
-{
- unsigned long flags;
- struct il_rx_queue *rxq = &il->rxq;
- int ret;
-
- /* nic_init */
- spin_lock_irqsave(&il->lock, flags);
- il->cfg->ops->lib->apm_ops.init(il);
-
- /* Set interrupt coalescing calibration timer to default (512 usecs) */
- il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF);
-
- spin_unlock_irqrestore(&il->lock, flags);
-
- il4965_set_pwr_vmain(il);
-
- il->cfg->ops->lib->apm_ops.config(il);
-
- /* Allocate the RX queue, or reset if it is already allocated */
- if (!rxq->bd) {
- ret = il_rx_queue_alloc(il);
- if (ret) {
- IL_ERR("Unable to initialize Rx queue\n");
- return -ENOMEM;
- }
- } else
- il4965_rx_queue_reset(il, rxq);
-
- il4965_rx_replenish(il);
-
- il4965_rx_init(il, rxq);
-
- spin_lock_irqsave(&il->lock, flags);
-
- rxq->need_update = 1;
- il_rx_queue_update_write_ptr(il, rxq);
-
- spin_unlock_irqrestore(&il->lock, flags);
-
- /* Allocate or reset and init all Tx and Command queues */
- if (!il->txq) {
- ret = il4965_txq_ctx_alloc(il);
- if (ret)
- return ret;
- } else
- il4965_txq_ctx_reset(il);
-
- set_bit(STATUS_INIT, &il->status);
-
- return 0;
-}
-
-/**
- * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
- */
-static inline __le32 il4965_dma_addr2rbd_ptr(struct il_priv *il,
- dma_addr_t dma_addr)
-{
- return cpu_to_le32((u32)(dma_addr >> 8));
-}
-
-/**
- * il4965_rx_queue_restock - refill RX queue from pre-allocated pool
- *
- * If there are slots in the RX queue that need to be restocked,
- * and we have free pre-allocated buffers, fill the ranks as much
- * as we can, pulling from rx_free.
- *
- * This moves the 'write' idx forward to catch up with 'processed', and
- * also updates the memory address in the firmware to reference the new
- * target buffer.
- */
-void il4965_rx_queue_restock(struct il_priv *il)
-{
- struct il_rx_queue *rxq = &il->rxq;
- struct list_head *element;
- struct il_rx_buf *rxb;
- unsigned long flags;
-
- spin_lock_irqsave(&rxq->lock, flags);
- while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
- /* The overwritten rxb must be a used one */
- rxb = rxq->queue[rxq->write];
- BUG_ON(rxb && rxb->page);
-
- /* Get next free Rx buffer, remove from free list */
- element = rxq->rx_free.next;
- rxb = list_entry(element, struct il_rx_buf, list);
- list_del(element);
-
- /* Point to Rx buffer via next RBD in circular buffer */
- rxq->bd[rxq->write] = il4965_dma_addr2rbd_ptr(il,
- rxb->page_dma);
- rxq->queue[rxq->write] = rxb;
- rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
- rxq->free_count--;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
- /* If the pre-allocated buffer pool is dropping low, schedule to
- * refill it */
- if (rxq->free_count <= RX_LOW_WATERMARK)
- queue_work(il->workqueue, &il->rx_replenish);
-
-
- /* If we've added more space for the firmware to place data, tell it.
- * Increment device's write pointer in multiples of 8. */
- if (rxq->write_actual != (rxq->write & ~0x7)) {
- spin_lock_irqsave(&rxq->lock, flags);
- rxq->need_update = 1;
- spin_unlock_irqrestore(&rxq->lock, flags);
- il_rx_queue_update_write_ptr(il, rxq);
- }
-}
-
-/**
- * il4965_rx_replenish - Move all used packet from rx_used to rx_free
- *
- * When moving to rx_free an SKB is allocated for the slot.
- *
- * Also restock the Rx queue via il_rx_queue_restock.
- * This is called as a scheduled work item (except for during initialization)
- */
-static void il4965_rx_allocate(struct il_priv *il, gfp_t priority)
-{
- struct il_rx_queue *rxq = &il->rxq;
- struct list_head *element;
- struct il_rx_buf *rxb;
- struct page *page;
- unsigned long flags;
- gfp_t gfp_mask = priority;
-
- while (1) {
- spin_lock_irqsave(&rxq->lock, flags);
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- return;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- if (rxq->free_count > RX_LOW_WATERMARK)
- gfp_mask |= __GFP_NOWARN;
-
- if (il->hw_params.rx_page_order > 0)
- gfp_mask |= __GFP_COMP;
-
- /* Alloc a new receive buffer */
- page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
- if (!page) {
- if (net_ratelimit())
- D_INFO("alloc_pages failed, "
- "order: %d\n",
- il->hw_params.rx_page_order);
-
- if (rxq->free_count <= RX_LOW_WATERMARK &&
- net_ratelimit())
- IL_ERR(
- "Failed to alloc_pages with %s. "
- "Only %u free buffers remaining.\n",
- priority == GFP_ATOMIC ?
- "GFP_ATOMIC" : "GFP_KERNEL",
- rxq->free_count);
- /* We don't reschedule replenish work here -- we will
- * call the restock method and if it still needs
- * more buffers it will schedule replenish */
- return;
- }
-
- spin_lock_irqsave(&rxq->lock, flags);
-
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- __free_pages(page, il->hw_params.rx_page_order);
- return;
- }
- element = rxq->rx_used.next;
- rxb = list_entry(element, struct il_rx_buf, list);
- list_del(element);
-
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- BUG_ON(rxb->page);
- rxb->page = page;
- /* Get physical address of the RB */
- rxb->page_dma = pci_map_page(il->pci_dev, page, 0,
- PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- /* dma address must be no more than 36 bits */
- BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
- /* and also 256 byte aligned! */
- BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
-
- spin_lock_irqsave(&rxq->lock, flags);
-
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- il->alloc_rxb_page++;
-
- spin_unlock_irqrestore(&rxq->lock, flags);
- }
-}
-
-void il4965_rx_replenish(struct il_priv *il)
-{
- unsigned long flags;
-
- il4965_rx_allocate(il, GFP_KERNEL);
-
- spin_lock_irqsave(&il->lock, flags);
- il4965_rx_queue_restock(il);
- spin_unlock_irqrestore(&il->lock, flags);
-}
-
-void il4965_rx_replenish_now(struct il_priv *il)
-{
- il4965_rx_allocate(il, GFP_ATOMIC);
-
- il4965_rx_queue_restock(il);
-}
-
-/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have its SKB set to NULL
- * This free routine walks the list of POOL entries and if SKB is set to
- * non NULL it is unmapped and freed
- */
-void il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
-{
- int i;
- for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
- if (rxq->pool[i].page != NULL) {
- pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
- PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- __il_free_pages(il, rxq->pool[i].page);
- rxq->pool[i].page = NULL;
- }
- }
-
- dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
- rxq->bd_dma);
- dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
- rxq->rb_stts, rxq->rb_stts_dma);
- rxq->bd = NULL;
- rxq->rb_stts = NULL;
-}
-
-int il4965_rxq_stop(struct il_priv *il)
-{
-
- /* stop Rx DMA */
- il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
- il_poll_bit(il, FH_MEM_RSSR_RX_STATUS_REG,
- FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
-
- return 0;
-}
-
-int il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
-{
- int idx = 0;
- int band_offset = 0;
-
- /* HT rate format: mac80211 wants an MCS number, which is just LSB */
- if (rate_n_flags & RATE_MCS_HT_MSK) {
- idx = (rate_n_flags & 0xff);
- return idx;
- /* Legacy rate format, search for match in table */
- } else {
- if (band == IEEE80211_BAND_5GHZ)
- band_offset = IL_FIRST_OFDM_RATE;
- for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++)
- if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
- return idx - band_offset;
- }
-
- return -1;
-}
-
-static int il4965_calc_rssi(struct il_priv *il,
- struct il_rx_phy_res *rx_resp)
-{
- /* data from PHY/DSP regarding signal strength, etc.,
- * contents are always there, not configurable by host. */
- struct il4965_rx_non_cfg_phy *ncphy =
- (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
- u32 agc = (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK)
- >> IL49_AGC_DB_POS;
-
- u32 valid_antennae =
- (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK)
- >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
- u8 max_rssi = 0;
- u32 i;
-
- /* Find max rssi among 3 possible receivers.
- * These values are measured by the digital signal processor (DSP).
- * They should stay fairly constant even as the signal strength varies,
- * if the radio's automatic gain control (AGC) is working right.
- * AGC value (see below) will provide the "interesting" info. */
- for (i = 0; i < 3; i++)
- if (valid_antennae & (1 << i))
- max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
-
- D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
- ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
- max_rssi, agc);
-
- /* dBm = max_rssi dB - agc dB - constant.
- * Higher AGC (higher radio gain) means lower signal. */
- return max_rssi - agc - IL4965_RSSI_OFFSET;
-}
-
-
-static u32 il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in)
-{
- u32 decrypt_out = 0;
-
- if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
- RX_RES_STATUS_STATION_FOUND)
- decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
- RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
-
- decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
-
- /* packet was not encrypted */
- if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
- RX_RES_STATUS_SEC_TYPE_NONE)
- return decrypt_out;
-
- /* packet was encrypted with unknown alg */
- if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
- RX_RES_STATUS_SEC_TYPE_ERR)
- return decrypt_out;
-
- /* decryption was not done in HW */
- if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
- RX_MPDU_RES_STATUS_DEC_DONE_MSK)
- return decrypt_out;
-
- switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
-
- case RX_RES_STATUS_SEC_TYPE_CCMP:
- /* alg is CCM: check MIC only */
- if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
- /* Bad MIC */
- decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
- else
- decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
-
- break;
-
- case RX_RES_STATUS_SEC_TYPE_TKIP:
- if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
- /* Bad TTAK */
- decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
- break;
- }
- /* fall through if TTAK OK */
- default:
- if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
- decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
- else
- decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
- break;
- }
-
- D_RX("decrypt_in:0x%x decrypt_out = 0x%x\n",
- decrypt_in, decrypt_out);
-
- return decrypt_out;
-}
-
-static void il4965_pass_packet_to_mac80211(struct il_priv *il,
- struct ieee80211_hdr *hdr,
- u16 len,
- u32 ampdu_status,
- struct il_rx_buf *rxb,
- struct ieee80211_rx_status *stats)
-{
- struct sk_buff *skb;
- __le16 fc = hdr->frame_control;
-
- /* We only process data packets if the interface is open */
- if (unlikely(!il->is_open)) {
- D_DROP(
- "Dropping packet while interface is not open.\n");
- return;
- }
-
- /* In case of HW accelerated crypto and bad decryption, drop */
- if (!il->cfg->mod_params->sw_crypto &&
- il_set_decrypted_flag(il, hdr, ampdu_status, stats))
- return;
-
- skb = dev_alloc_skb(128);
- if (!skb) {
- IL_ERR("dev_alloc_skb failed\n");
- return;
- }
-
- skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
-
- il_update_stats(il, false, fc, len);
- memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
-
- ieee80211_rx(il->hw, skb);
- il->alloc_rxb_page--;
- rxb->page = NULL;
-}
-
-/* Called for REPLY_RX (legacy ABG frames), or
- * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
-void il4965_rx_reply_rx(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct ieee80211_hdr *header;
- struct ieee80211_rx_status rx_status;
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il_rx_phy_res *phy_res;
- __le32 rx_pkt_status;
- struct il_rx_mpdu_res_start *amsdu;
- u32 len;
- u32 ampdu_status;
- u32 rate_n_flags;
-
- /**
- * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
- * REPLY_RX: physical layer info is in this buffer
- * REPLY_RX_MPDU_CMD: physical layer info was sent in separate
- * command and cached in il->last_phy_res
- *
- * Here we set up local variables depending on which command is
- * received.
- */
- if (pkt->hdr.cmd == REPLY_RX) {
- phy_res = (struct il_rx_phy_res *)pkt->u.raw;
- header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
- + phy_res->cfg_phy_cnt);
-
- len = le16_to_cpu(phy_res->byte_count);
- rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
- phy_res->cfg_phy_cnt + len);
- ampdu_status = le32_to_cpu(rx_pkt_status);
- } else {
- if (!il->_4965.last_phy_res_valid) {
- IL_ERR("MPDU frame without cached PHY data\n");
- return;
- }
- phy_res = &il->_4965.last_phy_res;
- amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw;
- header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
- len = le16_to_cpu(amsdu->byte_count);
- rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
- ampdu_status = il4965_translate_rx_status(il,
- le32_to_cpu(rx_pkt_status));
- }
-
- if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
- D_DROP("dsp size out of range [0,20]: %d/n",
- phy_res->cfg_phy_cnt);
- return;
- }
-
- if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
- !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
- D_RX("Bad CRC or FIFO: 0x%08X.\n",
- le32_to_cpu(rx_pkt_status));
- return;
- }
-
- /* This will be used in several places later */
- rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
-
- /* rx_status carries information about the packet to mac80211 */
- rx_status.mactime = le64_to_cpu(phy_res->timestamp);
- rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
- IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
- rx_status.freq =
- ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
- rx_status.band);
- rx_status.rate_idx =
- il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
- rx_status.flag = 0;
-
- /* TSF isn't reliable. In order to allow smooth user experience,
- * this W/A doesn't propagate it to the mac80211 */
- /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/
-
- il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
-
- /* Find max signal strength (dBm) among 3 antenna/receiver chains */
- rx_status.signal = il4965_calc_rssi(il, phy_res);
-
- il_dbg_log_rx_data_frame(il, len, header);
- D_STATS("Rssi %d, TSF %llu\n",
- rx_status.signal, (unsigned long long)rx_status.mactime);
-
- /*
- * "antenna number"
- *
- * It seems that the antenna field in the phy flags value
- * is actually a bit field. This is undefined by radiotap,
- * it wants an actual antenna number but I always get "7"
- * for most legacy frames I receive indicating that the
- * same frame was received on all three RX chains.
- *
- * I think this field should be removed in favor of a
- * new 802.11n radiotap field "RX chains" that is defined
- * as a bitmask.
- */
- rx_status.antenna =
- (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
- >> RX_RES_PHY_FLAGS_ANTENNA_POS;
-
- /* set the preamble flag if appropriate */
- if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
- rx_status.flag |= RX_FLAG_SHORTPRE;
-
- /* Set up the HT phy flags */
- if (rate_n_flags & RATE_MCS_HT_MSK)
- rx_status.flag |= RX_FLAG_HT;
- if (rate_n_flags & RATE_MCS_HT40_MSK)
- rx_status.flag |= RX_FLAG_40MHZ;
- if (rate_n_flags & RATE_MCS_SGI_MSK)
- rx_status.flag |= RX_FLAG_SHORT_GI;
-
- il4965_pass_packet_to_mac80211(il, header, len, ampdu_status,
- rxb, &rx_status);
-}
-
-/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
- * This will be used later in il_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
-void il4965_rx_reply_rx_phy(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- il->_4965.last_phy_res_valid = true;
- memcpy(&il->_4965.last_phy_res, pkt->u.raw,
- sizeof(struct il_rx_phy_res));
-}
-
-static int il4965_get_channels_for_scan(struct il_priv *il,
- struct ieee80211_vif *vif,
- enum ieee80211_band band,
- u8 is_active, u8 n_probes,
- struct il_scan_channel *scan_ch)
-{
- struct ieee80211_channel *chan;
- const struct ieee80211_supported_band *sband;
- const struct il_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added, i;
- u16 channel;
-
- sband = il_get_hw_mode(il, band);
- if (!sband)
- return 0;
-
- active_dwell = il_get_active_dwell_time(il, band, n_probes);
- passive_dwell = il_get_passive_dwell_time(il, band, vif);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
- for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
- chan = il->scan_request->channels[i];
-
- if (chan->band != band)
- continue;
-
- channel = chan->hw_value;
- scan_ch->channel = cpu_to_le16(channel);
-
- ch_info = il_get_channel_info(il, band, channel);
- if (!il_is_channel_valid(ch_info)) {
- D_SCAN(
- "Channel %d is INVALID for this band.\n",
- channel);
- continue;
- }
-
- if (!is_active || il_is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
- scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
- else
- scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
-
- if (n_probes)
- scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes);
-
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-
- /* Set txpower levels to defaults */
- scan_ch->dsp_atten = 110;
-
- /* NOTE: if we were doing 6Mb OFDM for scans we'd use
- * power level:
- * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
- */
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else
- scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-
- D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n",
- channel, le32_to_cpu(scan_ch->type),
- (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
- "ACTIVE" : "PASSIVE",
- (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
- active_dwell : passive_dwell);
-
- scan_ch++;
- added++;
- }
-
- D_SCAN("total channels to scan %d\n", added);
- return added;
-}
-
-int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
-{
- struct il_host_cmd cmd = {
- .id = REPLY_SCAN_CMD,
- .len = sizeof(struct il_scan_cmd),
- .flags = CMD_SIZE_HUGE,
- };
- struct il_scan_cmd *scan;
- struct il_rxon_context *ctx = &il->ctx;
- u32 rate_flags = 0;
- u16 cmd_len;
- u16 rx_chain = 0;
- enum ieee80211_band band;
- u8 n_probes = 0;
- u8 rx_ant = il->hw_params.valid_rx_ant;
- u8 rate;
- bool is_active = false;
- int chan_mod;
- u8 active_chains;
- u8 scan_tx_antennas = il->hw_params.valid_tx_ant;
- int ret;
-
- lockdep_assert_held(&il->mutex);
-
- if (vif)
- ctx = il_rxon_ctx_from_vif(vif);
-
- if (!il->scan_cmd) {
- il->scan_cmd = kmalloc(sizeof(struct il_scan_cmd) +
- IL_MAX_SCAN_SIZE, GFP_KERNEL);
- if (!il->scan_cmd) {
- D_SCAN(
- "fail to allocate memory for scan\n");
- return -ENOMEM;
- }
- }
- scan = il->scan_cmd;
- memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE);
-
- scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
- scan->quiet_time = IL_ACTIVE_QUIET_TIME;
-
- if (il_is_any_associated(il)) {
- u16 interval;
- u32 extra;
- u32 suspend_time = 100;
- u32 scan_suspend_time = 100;
-
- D_INFO("Scanning while associated...\n");
- interval = vif->bss_conf.beacon_int;
-
- scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(200 * 1024);
- if (!interval)
- interval = suspend_time;
-
- extra = (suspend_time / interval) << 22;
- scan_suspend_time = (extra |
- ((suspend_time % interval) * 1024));
- scan->suspend_time = cpu_to_le32(scan_suspend_time);
- D_SCAN("suspend_time 0x%X beacon interval %d\n",
- scan_suspend_time, interval);
- }
-
- if (il->scan_request->n_ssids) {
- int i, p = 0;
- D_SCAN("Kicking off active scan\n");
- for (i = 0; i < il->scan_request->n_ssids; i++) {
- /* always does wildcard anyway */
- if (!il->scan_request->ssids[i].ssid_len)
- continue;
- scan->direct_scan[p].id = WLAN_EID_SSID;
- scan->direct_scan[p].len =
- il->scan_request->ssids[i].ssid_len;
- memcpy(scan->direct_scan[p].ssid,
- il->scan_request->ssids[i].ssid,
- il->scan_request->ssids[i].ssid_len);
- n_probes++;
- p++;
- }
- is_active = true;
- } else
- D_SCAN("Start passive scan.\n");
-
- scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
- scan->tx_cmd.sta_id = ctx->bcast_sta_id;
- scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
- switch (il->scan_band) {
- case IEEE80211_BAND_2GHZ:
- scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- chan_mod = le32_to_cpu(
- il->ctx.active.flags &
- RXON_FLG_CHANNEL_MODE_MSK)
- >> RXON_FLG_CHANNEL_MODE_POS;
- if (chan_mod == CHANNEL_MODE_PURE_40) {
- rate = RATE_6M_PLCP;
- } else {
- rate = RATE_1M_PLCP;
- rate_flags = RATE_MCS_CCK_MSK;
- }
- break;
- case IEEE80211_BAND_5GHZ:
- rate = RATE_6M_PLCP;
- break;
- default:
- IL_WARN("Invalid scan band\n");
- return -EIO;
- }
-
- /*
- * If active scanning is requested but a certain channel is
- * marked passive, we can do active scanning if we detect
- * transmissions.
- *
- * There is an issue with some firmware versions that triggers
- * a sysassert on a "good CRC threshold" of zero (== disabled),
- * on a radar channel even though this means that we should NOT
- * send probes.
- *
- * The "good CRC threshold" is the number of frames that we
- * need to receive during our dwell time on a channel before
- * sending out probes -- setting this to a huge value will
- * mean we never reach it, but at the same time work around
- * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER
- * here instead of IL_GOOD_CRC_TH_DISABLED.
- */
- scan->good_CRC_th = is_active ? IL_GOOD_CRC_TH_DEFAULT :
- IL_GOOD_CRC_TH_NEVER;
-
- band = il->scan_band;
-
- if (il->cfg->scan_rx_antennas[band])
- rx_ant = il->cfg->scan_rx_antennas[band];
-
- il->scan_tx_ant[band] = il4965_toggle_tx_ant(il,
- il->scan_tx_ant[band],
- scan_tx_antennas);
- rate_flags |= il4965_ant_idx_to_flags(il->scan_tx_ant[band]);
- scan->tx_cmd.rate_n_flags = il4965_hw_set_rate_n_flags(rate, rate_flags);
-
- /* In power save mode use one chain, otherwise use all chains */
- if (test_bit(STATUS_POWER_PMI, &il->status)) {
- /* rx_ant has been set to all valid chains previously */
- active_chains = rx_ant &
- ((u8)(il->chain_noise_data.active_chains));
- if (!active_chains)
- active_chains = rx_ant;
-
- D_SCAN("chain_noise_data.active_chains: %u\n",
- il->chain_noise_data.active_chains);
-
- rx_ant = il4965_first_antenna(active_chains);
- }
-
- /* MIMO is not used here, but value is required */
- rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
- rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
- rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
- rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
- scan->rx_chain = cpu_to_le16(rx_chain);
-
- cmd_len = il_fill_probe_req(il,
- (struct ieee80211_mgmt *)scan->data,
- vif->addr,
- il->scan_request->ie,
- il->scan_request->ie_len,
- IL_MAX_SCAN_SIZE - sizeof(*scan));
- scan->tx_cmd.len = cpu_to_le16(cmd_len);
-
- scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
- RXON_FILTER_BCON_AWARE_MSK);
-
- scan->channel_count = il4965_get_channels_for_scan(il, vif, band,
- is_active, n_probes,
- (void *)&scan->data[cmd_len]);
- if (scan->channel_count == 0) {
- D_SCAN("channel count %d\n", scan->channel_count);
- return -EIO;
- }
-
- cmd.len += le16_to_cpu(scan->tx_cmd.len) +
- scan->channel_count * sizeof(struct il_scan_channel);
- cmd.data = scan;
- scan->len = cpu_to_le16(cmd.len);
-
- set_bit(STATUS_SCAN_HW, &il->status);
-
- ret = il_send_cmd_sync(il, &cmd);
- if (ret)
- clear_bit(STATUS_SCAN_HW, &il->status);
-
- return ret;
-}
-
-int il4965_manage_ibss_station(struct il_priv *il,
- struct ieee80211_vif *vif, bool add)
-{
- struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
-
- if (add)
- return il4965_add_bssid_station(il, vif_priv->ctx,
- vif->bss_conf.bssid,
- &vif_priv->ibss_bssid_sta_id);
- return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
- vif->bss_conf.bssid);
-}
-
-void il4965_free_tfds_in_queue(struct il_priv *il,
- int sta_id, int tid, int freed)
-{
- lockdep_assert_held(&il->sta_lock);
-
- if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed)
- il->stations[sta_id].tid[tid].tfds_in_queue -= freed;
- else {
- D_TX("free more than tfds_in_queue (%u:%d)\n",
- il->stations[sta_id].tid[tid].tfds_in_queue,
- freed);
- il->stations[sta_id].tid[tid].tfds_in_queue = 0;
- }
-}
-
-#define IL_TX_QUEUE_MSK 0xfffff
-
-static bool il4965_is_single_rx_stream(struct il_priv *il)
-{
- return il->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
- il->current_ht_config.single_chain_sufficient;
-}
-
-#define IL_NUM_RX_CHAINS_MULTIPLE 3
-#define IL_NUM_RX_CHAINS_SINGLE 2
-#define IL_NUM_IDLE_CHAINS_DUAL 2
-#define IL_NUM_IDLE_CHAINS_SINGLE 1
-
-/*
- * Determine how many receiver/antenna chains to use.
- *
- * More provides better reception via diversity. Fewer saves power
- * at the expense of throughput, but only when not in powersave to
- * start with.
- *
- * MIMO (dual stream) requires at least 2, but works better with 3.
- * This does not determine *which* chains to use, just how many.
- */
-static int il4965_get_active_rx_chain_count(struct il_priv *il)
-{
- /* # of Rx chains to use when expecting MIMO. */
- if (il4965_is_single_rx_stream(il))
- return IL_NUM_RX_CHAINS_SINGLE;
- else
- return IL_NUM_RX_CHAINS_MULTIPLE;
-}
-
-/*
- * When we are in power saving mode, unless device support spatial
- * multiplexing power save, use the active count for rx chain count.
- */
-static int
-il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt)
-{
- /* # Rx chains when idling, depending on SMPS mode */
- switch (il->current_ht_config.smps) {
- case IEEE80211_SMPS_STATIC:
- case IEEE80211_SMPS_DYNAMIC:
- return IL_NUM_IDLE_CHAINS_SINGLE;
- case IEEE80211_SMPS_OFF:
- return active_cnt;
- default:
- WARN(1, "invalid SMPS mode %d",
- il->current_ht_config.smps);
- return active_cnt;
- }
-}
-
-/* up to 4 chains */
-static u8 il4965_count_chain_bitmap(u32 chain_bitmap)
-{
- u8 res;
- res = (chain_bitmap & BIT(0)) >> 0;
- res += (chain_bitmap & BIT(1)) >> 1;
- res += (chain_bitmap & BIT(2)) >> 2;
- res += (chain_bitmap & BIT(3)) >> 3;
- return res;
-}
-
-/**
- * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
- *
- * Selects how many and which Rx receivers/antennas/chains to use.
- * This should not be used for scan command ... it puts data in wrong place.
- */
-void il4965_set_rxon_chain(struct il_priv *il, struct il_rxon_context *ctx)
-{
- bool is_single = il4965_is_single_rx_stream(il);
- bool is_cam = !test_bit(STATUS_POWER_PMI, &il->status);
- u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
- u32 active_chains;
- u16 rx_chain;
-
- /* Tell uCode which antennas are actually connected.
- * Before first association, we assume all antennas are connected.
- * Just after first association, il4965_chain_noise_calibration()
- * checks which antennas actually *are* connected. */
- if (il->chain_noise_data.active_chains)
- active_chains = il->chain_noise_data.active_chains;
- else
- active_chains = il->hw_params.valid_rx_ant;
-
- rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
-
- /* How many receivers should we use? */
- active_rx_cnt = il4965_get_active_rx_chain_count(il);
- idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt);
-
-
- /* correct rx chain count according hw settings
- * and chain noise calibration
- */
- valid_rx_cnt = il4965_count_chain_bitmap(active_chains);
- if (valid_rx_cnt < active_rx_cnt)
- active_rx_cnt = valid_rx_cnt;
-
- if (valid_rx_cnt < idle_rx_cnt)
- idle_rx_cnt = valid_rx_cnt;
-
- rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
- rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
-
- ctx->staging.rx_chain = cpu_to_le16(rx_chain);
-
- if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam)
- ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
- else
- ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
-
- D_ASSOC("rx_chain=0x%X active=%d idle=%d\n",
- ctx->staging.rx_chain,
- active_rx_cnt, idle_rx_cnt);
-
- WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
- active_rx_cnt < idle_rx_cnt);
-}
-
-u8 il4965_toggle_tx_ant(struct il_priv *il, u8 ant, u8 valid)
-{
- int i;
- u8 ind = ant;
-
- for (i = 0; i < RATE_ANT_NUM - 1; i++) {
- ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
- if (valid & BIT(ind))
- return ind;
- }
- return ant;
-}
-
-static const char *il4965_get_fh_string(int cmd)
-{
- switch (cmd) {
- IL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG);
- IL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG);
- IL_CMD(FH_RSCSR_CHNL0_WPTR);
- IL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG);
- IL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG);
- IL_CMD(FH_MEM_RSSR_RX_STATUS_REG);
- IL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
- IL_CMD(FH_TSSR_TX_STATUS_REG);
- IL_CMD(FH_TSSR_TX_ERROR_REG);
- default:
- return "UNKNOWN";
- }
-}
-
-int il4965_dump_fh(struct il_priv *il, char **buf, bool display)
-{
- int i;
-#ifdef CONFIG_IWLEGACY_DEBUG
- int pos = 0;
- size_t bufsz = 0;
-#endif
- static const u32 fh_tbl[] = {
- FH_RSCSR_CHNL0_STTS_WPTR_REG,
- FH_RSCSR_CHNL0_RBDCB_BASE_REG,
- FH_RSCSR_CHNL0_WPTR,
- FH_MEM_RCSR_CHNL0_CONFIG_REG,
- FH_MEM_RSSR_SHARED_CTRL_REG,
- FH_MEM_RSSR_RX_STATUS_REG,
- FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
- FH_TSSR_TX_STATUS_REG,
- FH_TSSR_TX_ERROR_REG
- };
-#ifdef CONFIG_IWLEGACY_DEBUG
- if (display) {
- bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
- *buf = kmalloc(bufsz, GFP_KERNEL);
- if (!*buf)
- return -ENOMEM;
- pos += scnprintf(*buf + pos, bufsz - pos,
- "FH register values:\n");
- for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
- pos += scnprintf(*buf + pos, bufsz - pos,
- " %34s: 0X%08x\n",
- il4965_get_fh_string(fh_tbl[i]),
- il_rd(il, fh_tbl[i]));
- }
- return pos;
- }
-#endif
- IL_ERR("FH register values:\n");
- for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
- IL_ERR(" %34s: 0X%08x\n",
- il4965_get_fh_string(fh_tbl[i]),
- il_rd(il, fh_tbl[i]));
- }
- return 0;
-}
projects / cascardo / linux.git / commitdiff