[ARM] pxa/ezx: fix pin configuration for low power mode

Fix LPM configuration on ezx.c

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 92ba16e..7db966d 100644 (file)
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
        GPIO25_SSP1_TXD,
        GPIO26_SSP1_RXD,
        GPIO24_GPIO,                            /* pcap chip select */
-       GPIO1_GPIO,                             /* pcap interrupt */
-       GPIO4_GPIO,                             /* WDI_AP */
-       GPIO55_GPIO,                            /* SYS_RESTART */
+       GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,       /* pcap interrupt */
+       GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,        /* WDI_AP */
+       GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,       /* SYS_RESTART */
 
        /* MMC */
        GPIO32_MMC_CLK,
@@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
 static unsigned long gen1_pin_config[] __initdata = {
        /* flip / lockswitch */
-       GPIO12_GPIO,
+       GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
 
        /* bluetooth (bcm2035) */
-       GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,     /* HOSTWAKE */
+       GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,      /* HOSTWAKE */
        GPIO48_GPIO,                            /* RESET */
        GPIO28_GPIO,                            /* WAKEUP */
 
        /* Neptune handshake */
-       GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,      /* BP_RDY */
-       GPIO57_GPIO,                            /* AP_RDY */
-       GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,     /* WDI */
-       GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,      /* WDI2 */
-       GPIO82_GPIO,                            /* RESET */
-       GPIO99_GPIO,                            /* TC_MM_EN */
+       GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,       /* BP_RDY */
+       GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,       /* AP_RDY */
+       GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,      /* WDI */
+       GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,       /* WDI2 */
+       GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,       /* RESET */
+       GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,       /* TC_MM_EN */
 
        /* sound */
        GPIO52_SSP3_SCLK,
@@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
        defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
 static unsigned long gen2_pin_config[] __initdata = {
        /* flip / lockswitch */
-       GPIO15_GPIO,
+       GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
 
        /* EOC */
-       GPIO10_GPIO,
+       GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
 
        /* bluetooth (bcm2045) */
-       GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,     /* HOSTWAKE */
+       GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,      /* HOSTWAKE */
        GPIO37_GPIO,                            /* RESET */
        GPIO57_GPIO,                            /* WAKEUP */
 
        /* Neptune handshake */
-       GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,      /* BP_RDY */
-       GPIO96_GPIO,                            /* AP_RDY */
-       GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,      /* WDI */
-       GPIO116_GPIO,                           /* RESET */
+       GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,       /* BP_RDY */
+       GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,       /* AP_RDY */
+       GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,       /* WDI */
+       GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,      /* RESET */
        GPIO41_GPIO,                            /* BP_FLASH */
 
        /* sound */