From: Bill Pemberton Date: Fri, 27 Mar 2009 15:29:45 +0000 (-0400) Subject: Staging: comedi: remove C99 comments in pcl818.c X-Git-Tag: v2.6.31-rc1~105^2~305 X-Git-Url: http://git.cascardo.info/?a=commitdiff_plain;h=0109253dee3d211619876d3345ecc4c312d1b153;p=cascardo%2Flinux.git Staging: comedi: remove C99 comments in pcl818.c Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c index 43a9d56c6a43..b65a44bfdde9 100644 --- a/drivers/staging/comedi/drivers/pcl818.c +++ b/drivers/staging/comedi/drivers/pcl818.c @@ -107,9 +107,9 @@ A word or two about DMA. Driver support DMA operations at two ways: #include "8253.h" -// #define PCL818_MODE13_AO 1 +/* #define PCL818_MODE13_AO 1 */ -// boards constants +/* boards constants */ #define boardPCL818L 0 #define boardPCL818H 1 @@ -118,60 +118,60 @@ A word or two about DMA. Driver support DMA operations at two ways: #define boardPCL818 4 #define boardPCL718 5 -// IO space len +/* IO space len */ #define PCLx1x_RANGE 16 -// IO space len if we use FIFO +/* IO space len if we use FIFO */ #define PCLx1xFIFO_RANGE 32 -// W: clear INT request +/* W: clear INT request */ #define PCL818_CLRINT 8 -// R: return status byte +/* R: return status byte */ #define PCL818_STATUS 8 -// R: A/D high byte W: A/D range control +/* R: A/D high byte W: A/D range control */ #define PCL818_RANGE 1 -// R: next mux scan channel W: mux scan channel & range control pointer +/* R: next mux scan channel W: mux scan channel & range control pointer */ #define PCL818_MUX 2 -// R/W: operation control register +/* R/W: operation control register */ #define PCL818_CONTROL 9 -// W: counter enable +/* W: counter enable */ #define PCL818_CNTENABLE 10 -// R: low byte of A/D W: soft A/D trigger +/* R: low byte of A/D W: soft A/D trigger */ #define PCL818_AD_LO 0 -// R: high byte of A/D W: A/D range control +/* R: high byte of A/D W: A/D range control */ #define PCL818_AD_HI 1 -// W: D/A low&high byte +/* W: D/A low&high byte */ #define PCL818_DA_LO 4 #define PCL818_DA_HI 5 -// R: low&high byte of DI +/* R: low&high byte of DI */ #define PCL818_DI_LO 3 #define PCL818_DI_HI 11 -// W: low&high byte of DO +/* W: low&high byte of DO */ #define PCL818_DO_LO 3 #define PCL818_DO_HI 11 -// W: PCL718 second D/A +/* W: PCL718 second D/A */ #define PCL718_DA2_LO 6 #define PCL718_DA2_HI 7 -// counters +/* counters */ #define PCL818_CTR0 12 #define PCL818_CTR1 13 #define PCL818_CTR2 14 -// W: counter control +/* W: counter control */ #define PCL818_CTRCTL 15 -// W: fifo enable/disable +/* W: fifo enable/disable */ #define PCL818_FI_ENABLE 6 -// W: fifo interrupt clear +/* W: fifo interrupt clear */ #define PCL818_FI_INTCLR 20 -// W: fifo interrupt clear +/* W: fifo interrupt clear */ #define PCL818_FI_FLUSH 25 -// R: fifo status +/* R: fifo status */ #define PCL818_FI_STATUS 25 -// R: one record from FIFO +/* R: one record from FIFO */ #define PCL818_FI_DATALO 23 #define PCL818_FI_DATAHI 23 -// type of interrupt handler +/* type of interrupt handler */ #define INT_TYPE_AI1_INT 1 #define INT_TYPE_AI1_DMA 2 #define INT_TYPE_AI1_FIFO 3 @@ -184,7 +184,7 @@ A word or two about DMA. Driver support DMA operations at two ways: #endif #ifdef unused -// RTC stuff... +/* RTC stuff... */ #define INT_TYPE_AI1_DMA_RTC 9 #define INT_TYPE_AI3_DMA_RTC 10 @@ -254,22 +254,22 @@ static int RTC_timer_lock = 0; /* RTC int lock */ struct pcl818_board { - const char *name; // driver name - int n_ranges; // len of range list - int n_aichan_se; // num of A/D chans in single ended mode - int n_aichan_diff; // num of A/D chans in diferencial mode - unsigned int ns_min; // minimal alllowed delay between samples (in ns) - int n_aochan; // num of D/A chans - int n_dichan; // num of DI chans - int n_dochan; // num of DO chans - const struct comedi_lrange *ai_range_type; // default A/D rangelist - const struct comedi_lrange *ao_range_type; // default D/A rangelist - unsigned int io_range; // len of IO space - unsigned int IRQbits; // allowed interrupts - unsigned int DMAbits; // allowed DMA chans - int ai_maxdata; // maxdata for A/D - int ao_maxdata; // maxdata for D/A - unsigned char fifo; // 1=board has FIFO + const char *name; /* driver name */ + int n_ranges; /* len of range list */ + int n_aichan_se; /* num of A/D chans in single ended mode */ + int n_aichan_diff; /* num of A/D chans in diferencial mode */ + unsigned int ns_min; /* minimal alllowed delay between samples (in ns) */ + int n_aochan; /* num of D/A chans */ + int n_dichan; /* num of DI chans */ + int n_dochan; /* num of DO chans */ + const struct comedi_lrange *ai_range_type; /* default A/D rangelist */ + const struct comedi_lrange *ao_range_type; /* default D/A rangelist */ + unsigned int io_range; /* len of IO space */ + unsigned int IRQbits; /* allowed interrupts */ + unsigned int DMAbits; /* allowed DMA chans */ + int ai_maxdata; /* maxdata for A/D */ + int ao_maxdata; /* maxdata for D/A */ + unsigned char fifo; /* 1=board has FIFO */ int is_818; }; @@ -315,54 +315,54 @@ COMEDI_INITCLEANUP(driver_pcl818); struct pcl818_private { - unsigned int dma; // used DMA, 0=don't use DMA - int dma_rtc; // 1=RTC used with DMA, 0=no RTC alloc + unsigned int dma; /* used DMA, 0=don't use DMA */ + int dma_rtc; /* 1=RTC used with DMA, 0=no RTC alloc */ unsigned int io_range; #ifdef unused - unsigned long rtc_iobase; // RTC port region + unsigned long rtc_iobase; /* RTC port region */ unsigned int rtc_iosize; unsigned int rtc_irq; - struct timer_list rtc_irq_timer; // timer for RTC sanity check - unsigned long rtc_freq; // RTC int freq - int rtc_irq_blocked; // 1=we now do AI with DMA&RTC + struct timer_list rtc_irq_timer; /* timer for RTC sanity check */ + unsigned long rtc_freq; /* RTC int freq */ + int rtc_irq_blocked; /* 1=we now do AI with DMA&RTC */ #endif - unsigned long dmabuf[2]; // pointers to begin of DMA buffers - unsigned int dmapages[2]; // len of DMA buffers in PAGE_SIZEs - unsigned int hwdmaptr[2]; // hardware address of DMA buffers - unsigned int hwdmasize[2]; // len of DMA buffers in Bytes - unsigned int dmasamplsize; // size in samples hwdmasize[0]/2 - unsigned int last_top_dma; // DMA pointer in last RTC int - int next_dma_buf; // which DMA buffer will be used next round - long dma_runs_to_end; // how many we must permorm DMA transfer to end of record - unsigned long last_dma_run; // how many bytes we must transfer on last DMA page - unsigned char neverending_ai; // if=1, then we do neverending record (you must use cancel()) - unsigned int ns_min; // manimal alllowed delay between samples (in us) for actual card - int i8253_osc_base; // 1/frequency of on board oscilator in ns - int irq_free; // 1=have allocated IRQ - int irq_blocked; // 1=IRQ now uses any subdev - int irq_was_now_closed; // when IRQ finish, there's stored int818_mode for last interrupt - int ai_mode; // who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma - struct comedi_subdevice *last_int_sub; // ptr to subdevice which now finish - int ai_act_scan; // how many scans we finished - int ai_act_chan; // actual position in actual scan - unsigned int act_chanlist[16]; // MUX setting for actual AI operations - unsigned int act_chanlist_len; // how long is actual MUX list - unsigned int act_chanlist_pos; // actual position in MUX list - unsigned int ai_scans; // len of scanlist - unsigned int ai_n_chan; // how many channels is measured - unsigned int *ai_chanlist; // actaul chanlist - unsigned int ai_flags; // flaglist - unsigned int ai_data_len; // len of data buffer - short *ai_data; // data buffer - unsigned int ai_timer1; // timers + unsigned long dmabuf[2]; /* pointers to begin of DMA buffers */ + unsigned int dmapages[2]; /* len of DMA buffers in PAGE_SIZEs */ + unsigned int hwdmaptr[2]; /* hardware address of DMA buffers */ + unsigned int hwdmasize[2]; /* len of DMA buffers in Bytes */ + unsigned int dmasamplsize; /* size in samples hwdmasize[0]/2 */ + unsigned int last_top_dma; /* DMA pointer in last RTC int */ + int next_dma_buf; /* which DMA buffer will be used next round */ + long dma_runs_to_end; /* how many we must permorm DMA transfer to end of record */ + unsigned long last_dma_run; /* how many bytes we must transfer on last DMA page */ + unsigned char neverending_ai; /* if=1, then we do neverending record (you must use cancel()) */ + unsigned int ns_min; /* manimal alllowed delay between samples (in us) for actual card */ + int i8253_osc_base; /* 1/frequency of on board oscilator in ns */ + int irq_free; /* 1=have allocated IRQ */ + int irq_blocked; /* 1=IRQ now uses any subdev */ + int irq_was_now_closed; /* when IRQ finish, there's stored int818_mode for last interrupt */ + int ai_mode; /* who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma */ + struct comedi_subdevice *last_int_sub; /* ptr to subdevice which now finish */ + int ai_act_scan; /* how many scans we finished */ + int ai_act_chan; /* actual position in actual scan */ + unsigned int act_chanlist[16]; /* MUX setting for actual AI operations */ + unsigned int act_chanlist_len; /* how long is actual MUX list */ + unsigned int act_chanlist_pos; /* actual position in MUX list */ + unsigned int ai_scans; /* len of scanlist */ + unsigned int ai_n_chan; /* how many channels is measured */ + unsigned int *ai_chanlist; /* actaul chanlist */ + unsigned int ai_flags; /* flaglist */ + unsigned int ai_data_len; /* len of data buffer */ + short *ai_data; /* data buffer */ + unsigned int ai_timer1; /* timers */ unsigned int ai_timer2; - struct comedi_subdevice *sub_ai; // ptr to AI subdevice - unsigned char usefifo; // 1=use fifo + struct comedi_subdevice *sub_ai; /* ptr to AI subdevice */ + unsigned char usefifo; /* 1=use fifo */ unsigned int ao_readback[2]; }; -static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, // used for gain list programming +static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, /* used for gain list programming */ 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }; @@ -535,10 +535,10 @@ static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d) conv_finish: low = inb(dev->iobase + PCL818_AD_LO); - comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4) | (low >> 4))); // get one sample + comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4) | (low >> 4))); /* get one sample */ outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ - if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout! + if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */ rt_printk ("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n", (low & 0xf), @@ -549,7 +549,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d) return IRQ_HANDLED; } if (s->async->cur_chan == 0) { - // rt_printk("E"); + /* rt_printk("E"); */ devpriv->ai_act_scan--; } @@ -577,7 +577,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) disable_dma(devpriv->dma); devpriv->next_dma_buf = 1 - devpriv->next_dma_buf; - if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) { // switch dma bufs + if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) { /* switch dma bufs */ set_dma_mode(devpriv->dma, DMA_MODE_READ); flags = claim_dma_lock(); set_dma_addr(devpriv->dma, @@ -601,7 +601,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) bufptr = 0; for (i = 0; i < len; i++) { - if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout! + if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */ rt_printk ("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n", (ptr[bufptr] & 0xf), @@ -614,7 +614,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) return IRQ_HANDLED; } - comedi_buf_put(s->async, ptr[bufptr++] >> 4); // get one sample + comedi_buf_put(s->async, ptr[bufptr++] >> 4); /* get one sample */ devpriv->act_chanlist_pos++; if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) { @@ -627,7 +627,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) pcl818_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA; comedi_event(dev, s); - // printk("done int ai13 dma\n"); + /* printk("done int ai13 dma\n"); */ return IRQ_HANDLED; } } @@ -651,7 +651,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d) long ofs_dats; short *dmabuf = (short *) devpriv->dmabuf[0]; - //outb(2,0x378); + /* outb(2,0x378); */ switch (devpriv->ai_mode) { case INT_TYPE_AI1_DMA_RTC: case INT_TYPE_AI3_DMA_RTC: @@ -668,31 +668,31 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d) if (top1 != top2) return IRQ_HANDLED; - top1 = devpriv->hwdmasize[0] - top1; // where is now DMA in buffer + top1 = devpriv->hwdmasize[0] - top1; /* where is now DMA in buffer */ top1 >>= 1; - ofs_dats = top1 - devpriv->last_top_dma; // new samples from last call + ofs_dats = top1 - devpriv->last_top_dma; /* new samples from last call */ if (ofs_dats < 0) ofs_dats = (devpriv->dmasamplsize) + ofs_dats; if (!ofs_dats) - return IRQ_HANDLED; // exit=no new samples from last call - // obsluz data + return IRQ_HANDLED; /* exit=no new samples from last call */ + /* obsluz data */ i = devpriv->last_top_dma - 1; i &= (devpriv->dmasamplsize - 1); - if (dmabuf[i] != MAGIC_DMA_WORD) { // DMA overflow! + if (dmabuf[i] != MAGIC_DMA_WORD) { /* DMA overflow! */ comedi_error(dev, "A/D mode1/3 DMA buffer overflow!"); - //rt_printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize); + /* rt_printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize); */ pcl818_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; comedi_event(dev, s); return IRQ_HANDLED; } - //rt_printk("r %ld ",ofs_dats); + /* rt_printk("r %ld ",ofs_dats); */ bufptr = devpriv->last_top_dma; for (i = 0; i < ofs_dats; i++) { - if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout! + if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */ rt_printk ("comedi: A/D mode1/3 DMA - channel dropout %d!=%d !\n", (dmabuf[bufptr] & 0xf), @@ -705,7 +705,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d) return IRQ_HANDLED; } - comedi_buf_put(s->async, dmabuf[bufptr++] >> 4); // get one sample + comedi_buf_put(s->async, dmabuf[bufptr++] >> 4); /* get one sample */ bufptr &= (devpriv->dmasamplsize - 1); if (s->async->cur_chan == 0) { @@ -717,7 +717,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d) pcl818_ai_cancel(dev, s); s->async->events |= COMEDI_CB_EOA; comedi_event(dev, s); - //printk("done int ai13 dma\n"); + /* printk("done int ai13 dma\n"); */ return IRQ_HANDLED; } } @@ -727,11 +727,11 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d) bufptr &= (devpriv->dmasamplsize - 1); dmabuf[bufptr] = MAGIC_DMA_WORD; comedi_event(dev, s); - //outb(0,0x378); + /* outb(0,0x378); */ return IRQ_HANDLED; } - //outb(0,0x378); + /* outb(0,0x378); */ return IRQ_HANDLED; } #endif @@ -746,7 +746,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d) struct comedi_subdevice *s = dev->subdevices + 0; int i, len, lo; - outb(0, dev->iobase + PCL818_FI_INTCLR); // clear fifo int request + outb(0, dev->iobase + PCL818_FI_INTCLR); /* clear fifo int request */ lo = inb(dev->iobase + PCL818_FI_STATUS); @@ -774,7 +774,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d) for (i = 0; i < len; i++) { lo = inb(dev->iobase + PCL818_FI_DATALO); - if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout! + if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */ rt_printk ("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n", (lo & 0xf), @@ -786,7 +786,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d) return IRQ_HANDLED; } - comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4)); // get one sample + comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4)); /* get one sample */ if (s->async->cur_chan == 0) { devpriv->ai_act_scan--; @@ -818,7 +818,7 @@ static irqreturn_t interrupt_pcl818(int irq, void *d PT_REGS_ARG) comedi_error(dev, "premature interrupt"); return IRQ_HANDLED; } - //rt_printk("I\n"); + /* rt_printk("I\n"); */ switch (devpriv->ai_mode) { case INT_TYPE_AI1_DMA: @@ -881,12 +881,12 @@ static void pcl818_ai_mode13dma_int(int mode, struct comedi_device * dev, unsigned int bytes; rt_printk("mode13dma_int, mode: %d\n", mode); - disable_dma(devpriv->dma); // disable dma + disable_dma(devpriv->dma); /* disable dma */ bytes = devpriv->hwdmasize[0]; if (!devpriv->neverending_ai) { - bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short); // how many - devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; // how many DMA pages we must fiil - devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; //on last dma transfer must be moved + bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short); /* how many */ + devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; /* how many DMA pages we must fiil */ + devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; /* on last dma transfer must be moved */ devpriv->dma_runs_to_end--; if (devpriv->dma_runs_to_end >= 0) bytes = devpriv->hwdmasize[0]; @@ -928,7 +928,7 @@ static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device * dev, set_dma_count(devpriv->dma, devpriv->hwdmasize[0]); release_dma_lock(flags); enable_dma(devpriv->dma); - devpriv->last_top_dma = 0; //devpriv->hwdmasize[0]; + devpriv->last_top_dma = 0; /* devpriv->hwdmasize[0]; */ pole = (short *) devpriv->dmabuf[0]; devpriv->dmasamplsize = devpriv->hwdmasize[0] / 2; pole[devpriv->dmasamplsize - 1] = MAGIC_DMA_WORD; @@ -972,7 +972,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev, if (devpriv->irq_blocked) return -EBUSY; - start_pacer(dev, -1, 0, 0); // stop pacer + start_pacer(dev, -1, 0, 0); /* stop pacer */ seglen = check_channel_list(dev, s, devpriv->ai_chanlist, devpriv->ai_n_chan); @@ -992,7 +992,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev, devpriv->dma_runs_to_end = 0; if ((devpriv->ai_scans == 0) || (devpriv->ai_scans == -1)) - devpriv->neverending_ai = 1; //well, user want neverending + devpriv->neverending_ai = 1; /* well, user want neverending */ if (mode == 1) { i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1, @@ -1010,7 +1010,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev, outb(0, dev->iobase + PCL818_CNTENABLE); /* enable pacer */ switch (devpriv->dma) { - case 1: // DMA + case 1: /* DMA */ case 3: if (devpriv->dma_rtc == 0) { pcl818_ai_mode13dma_int(mode, dev, s); @@ -1025,8 +1025,8 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev, } #endif break; - case 0: // IRQ - // rt_printk("IRQ\n"); + case 0: /* IRQ */ + /* rt_printk("IRQ\n"); */ if (mode == 1) { devpriv->ai_mode = INT_TYPE_AI1_INT; outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ */ @@ -1035,8 +1035,8 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device * dev, outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ */ }; break; - case -1: // FIFO - outb(1, dev->iobase + PCL818_FI_ENABLE); // enable FIFO + case -1: /* FIFO */ + outb(1, dev->iobase + PCL818_FI_ENABLE); /* enable FIFO */ if (mode == 1) { devpriv->ai_mode = INT_TYPE_AI1_FIFO; outb(0x03, dev->iobase + PCL818_CONTROL); /* Pacer */ @@ -1080,7 +1080,7 @@ static int pcl818_ao_mode13(int mode, struct comedi_device * dev, struct comedi_ if (devpriv->irq_blocked) return -EBUSY; - start_pacer(dev, -1, 0, 0); // stop pacer + start_pacer(dev, -1, 0, 0); /* stop pacer */ devpriv->int13_act_scan = it->n; devpriv->int13_act_chan = 0; @@ -1175,30 +1175,34 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic } if (n_chan > 1) { - // first channel is everytime ok + /* first channel is everytime ok */ chansegment[0] = chanlist[0]; - // build part of chanlist + /* build part of chanlist */ for (i = 1, seglen = 1; i < n_chan; i++, seglen++) { - // rt_printk("%d. %d %d\n",i,CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); - // we detect loop, this must by finish + + /* rt_printk("%d. %d * %d\n",i, + * CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));*/ + + /* we detect loop, this must by finish */ + if (chanlist[0] == chanlist[i]) break; nowmustbechan = (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan; - if (nowmustbechan != CR_CHAN(chanlist[i])) { // channel list isn't continous :-( + if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continous :-( */ rt_printk ("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n", dev->minor, i, CR_CHAN(chanlist[i]), nowmustbechan, CR_CHAN(chanlist[0])); return 0; } - // well, this is next correct channel in list + /* well, this is next correct channel in list */ chansegment[i] = chanlist[i]; } - // check whole chanlist + /* check whole chanlist */ for (i = 0, segpos = 0; i < n_chan; i++) { - //rt_printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); + /* rt_printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); */ if (chanlist[i] != chansegment[i % seglen]) { rt_printk ("comedi%d: pcl818: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n", @@ -1208,7 +1212,7 @@ static int check_channel_list(struct comedi_device * dev, struct comedi_subdevic CR_CHAN(chanlist[i % seglen]), CR_RANGE(chanlist[i % seglen]), CR_AREF(chansegment[i % seglen])); - return 0; // chan/gain list is strange + return 0; /* chan/gain list is strange */ } } } else { @@ -1226,7 +1230,7 @@ static void setup_channel_list(struct comedi_device * dev, struct comedi_subdevi devpriv->act_chanlist_len = seglen; devpriv->act_chanlist_pos = 0; - for (i = 0; i < seglen; i++) { // store range list to card + for (i = 0; i < seglen; i++) { /* store range list to card */ devpriv->act_chanlist[i] = CR_CHAN(chanlist[i]); outb(muxonechan[CR_CHAN(chanlist[i])], dev->iobase + PCL818_MUX); /* select channel */ outb(CR_RANGE(chanlist[i]), dev->iobase + PCL818_RANGE); /* select gain */ @@ -1391,7 +1395,7 @@ static int ai_cmdtest(struct comedi_device * dev, struct comedi_subdevice * s, if (cmd->chanlist) { if (!check_channel_list(dev, s, cmd->chanlist, cmd->chanlist_len)) - return 5; // incorrect channels list + return 5; /* incorrect channels list */ } return 0; @@ -1420,14 +1424,14 @@ static int ai_cmd(struct comedi_device * dev, struct comedi_subdevice * s) devpriv->ai_scans = 0; } - if (cmd->scan_begin_src == TRIG_FOLLOW) { // mode 1, 3 - if (cmd->convert_src == TRIG_TIMER) { // mode 1 + if (cmd->scan_begin_src == TRIG_FOLLOW) { /* mode 1, 3 */ + if (cmd->convert_src == TRIG_TIMER) { /* mode 1 */ devpriv->ai_timer1 = cmd->convert_arg; retval = pcl818_ai_cmd_mode(1, dev, s); rt_printk("pcl818_ai_cmd() end\n"); return retval; } - if (cmd->convert_src == TRIG_EXT) { // mode 3 + if (cmd->convert_src == TRIG_EXT) { /* mode 3 */ return pcl818_ai_cmd_mode(3, dev, s); } } @@ -1450,7 +1454,7 @@ static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice #ifdef unused case INT_TYPE_AI1_DMA_RTC: case INT_TYPE_AI3_DMA_RTC: - set_rtc_irq_bit(0); // stop RTC + set_rtc_irq_bit(0); /* stop RTC */ del_timer(&devpriv->rtc_irq_timer); #endif case INT_TYPE_AI1_DMA: @@ -1476,7 +1480,7 @@ static int pcl818_ai_cancel(struct comedi_device * dev, struct comedi_subdevice inb(dev->iobase + PCL818_AD_HI); outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ outb(0, dev->iobase + PCL818_CONTROL); /* Stop A/D */ - if (devpriv->usefifo) { // FIFO shutdown + if (devpriv->usefifo) { /* FIFO shutdown */ outb(0, dev->iobase + PCL818_FI_INTCLR); outb(0, dev->iobase + PCL818_FI_FLUSH); outb(0, dev->iobase + PCL818_FI_ENABLE); @@ -1502,18 +1506,18 @@ static int pcl818_check(unsigned long iobase) outb(0x00, iobase + PCL818_MUX); comedi_udelay(1); if (inb(iobase + PCL818_MUX) != 0x00) - return 1; //there isn't card + return 1; /* there isn't card */ outb(0x55, iobase + PCL818_MUX); comedi_udelay(1); if (inb(iobase + PCL818_MUX) != 0x55) - return 1; //there isn't card + return 1; /* there isn't card */ outb(0x00, iobase + PCL818_MUX); comedi_udelay(1); outb(0x18, iobase + PCL818_CONTROL); comedi_udelay(1); if (inb(iobase + PCL818_CONTROL) != 0x18) - return 1; //there isn't card - return 0; // ok, card exist + return 1; /* there isn't card */ + return 0; /* ok, card exist */ } /* @@ -1522,15 +1526,15 @@ static int pcl818_check(unsigned long iobase) */ static void pcl818_reset(struct comedi_device * dev) { - if (devpriv->usefifo) { // FIFO shutdown + if (devpriv->usefifo) { /* FIFO shutdown */ outb(0, dev->iobase + PCL818_FI_INTCLR); outb(0, dev->iobase + PCL818_FI_FLUSH); outb(0, dev->iobase + PCL818_FI_ENABLE); } - outb(0, dev->iobase + PCL818_DA_LO); // DAC=0V + outb(0, dev->iobase + PCL818_DA_LO); /* DAC=0V */ outb(0, dev->iobase + PCL818_DA_HI); comedi_udelay(1); - outb(0, dev->iobase + PCL818_DO_HI); // DO=$0000 + outb(0, dev->iobase + PCL818_DO_HI); /* DO=$0000 */ outb(0, dev->iobase + PCL818_DO_LO); comedi_udelay(1); outb(0, dev->iobase + PCL818_CONTROL); @@ -1643,7 +1647,7 @@ static int rtc_setfreq_irq(int freq) */ static void free_resources(struct comedi_device * dev) { - //rt_printk("free_resource()\n"); + /* rt_printk("free_resource()\n"); */ if (dev->private) { pcl818_ai_cancel(dev, devpriv->sub_ai); pcl818_reset(dev); @@ -1670,7 +1674,7 @@ static void free_resources(struct comedi_device * dev) free_irq(dev->irq, dev); if (dev->iobase) release_region(dev->iobase, devpriv->io_range); - //rt_printk("free_resource() end\n"); + /* rt_printk("free_resource() end\n"); */ } /* @@ -1695,7 +1699,7 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i printk("comedi%d: pcl818: board=%s, ioport=0x%03lx", dev->minor, this_board->name, iobase); devpriv->io_range = this_board->io_range; - if ((this_board->fifo) && (it->options[2] == -1)) { // we've board with FIFO and we want to use FIFO + if ((this_board->fifo) && (it->options[2] == -1)) { /* we've board with FIFO and we want to use FIFO */ devpriv->io_range = PCLx1xFIFO_RANGE; devpriv->usefifo = 1; } @@ -1750,7 +1754,7 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i #ifdef unused /* grab RTC for DMA operations */ devpriv->dma_rtc = 0; - if (it->options[2] > 0) { // we want to use DMA + if (it->options[2] > 0) { /* we want to use DMA */ if (RTC_lock == 0) { if (!request_region(RTC_PORT(0), RTC_IO_EXTENT, "pcl818 (RTC)")) @@ -1809,8 +1813,8 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i devpriv->dmapages[0] = pages; devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]); devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE; - //rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); - if (devpriv->dma_rtc == 0) { // we must do duble buff :-( + /* rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */ + if (devpriv->dma_rtc == 0) { /* we must do duble buff :-( */ devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages); if (!devpriv->dmabuf[1]) { rt_printk @@ -1858,7 +1862,7 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i } if (this_board->is_818) { if ((it->options[4] == 1) || (it->options[4] == 10)) - s->range_table = &range_pcl818l_h_ai; // secondary range list jumper selectable + s->range_table = &range_pcl818l_h_ai; /* secondary range list jumper selectable */ } else { switch (it->options[4]) { case 0: @@ -1982,7 +1986,7 @@ static int pcl818_attach(struct comedi_device * dev, struct comedi_devconfig * i */ static int pcl818_detach(struct comedi_device * dev) { - // rt_printk("comedi%d: pcl818: remove\n", dev->minor); + /* rt_printk("comedi%d: pcl818: remove\n", dev->minor); */ free_resources(dev); return 0; }