Davidlohr Bueso [Thu, 21 Apr 2016 03:14:07 +0000 (20:14 -0700)]
perf bench futex: Simplify wrapper for LOCK_PI
Given that the 'val' parameter is ignored for FUTEX_LOCK_PI, get rid of
the bogus deadlock detection flag in the wrapper code and avoid the
extra argument, making it resemble its unlock counterpart. And if
nothing else, we already only pass 0 anyway.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Link: http://lkml.kernel.org/r/1461208447-29328-1-git-send-email-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Colin Ian King [Sat, 23 Apr 2016 13:45:54 +0000 (14:45 +0100)]
perf tests: Replace assignment with comparison on assert check
The current assert check is checking an assignment, which will always be
true. Instead, the assert should be checking if scale is equal to 0.122
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461419154-16918-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eric Engestrom [Mon, 25 Apr 2016 09:47:54 +0000 (10:47 +0100)]
perf tools: Remove duplicate const qualifier
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461577678-29517-1-git-send-email-eric.engestrom@imgtec.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 25 Apr 2016 20:17:18 +0000 (22:17 +0200)]
tools build: Fix perf_clean target
Fix perf_clean target to follow the same logic as perf target.
Fixes the following make invokation:
$ cd <kernelsrc> && make tools/perf_clean
Reported-by: TJ <linux@iam.tj>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116411
Link: http://lkml.kernel.org/r/1461615438-27894-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 25 Apr 2016 20:17:17 +0000 (22:17 +0200)]
perf tools: Make the x86 clean quiet
Turn current clean output:
$ make clean
rm -f arch/x86/include/generated/asm/syscalls_64.c
CLEAN libbpf
CLEAN libapi
into:
$ make clean
CLEAN x86
CLEAN libapi
CLEAN libbpf
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: TJ <linux@iam.tj>
Link: http://lkml.kernel.org/r/1461615438-27894-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 25 Apr 2016 19:45:29 +0000 (16:45 -0300)]
perf evlist: Decode perf_event_attr->branch_sample_type
While trying to use --call-graph lbr in 'perf trace', since we only are
interested in the callchain for userspace, up to the callchain, I found
that 'perf evlist' is not decoding the branch_sample_type field, fix it.
Before:
# perf record --call-graph lbr usleep 1
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000,
sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK,
disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1,
precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1,
comm_exec: 1, branch_sample_type: 51201
^^^^^^^^^^^^^^^^^^^^^^^^^
After:
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000,
sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK,
disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1,
precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1,
comm_exec: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-hozai7974u0ulgx13k96fcaw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 20 Apr 2016 23:06:02 +0000 (20:06 -0300)]
perf trace: Make --pf honour --min-stack too
To check deeply nested page fault callchains.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wuji34xx003kr88nmqt6jkgf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 20 Apr 2016 22:55:48 +0000 (19:55 -0300)]
perf trace: Make --event honour --min-stack too
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-shj0fazntmskhjild5i6x73l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Chris Phlipot [Wed, 20 Apr 2016 02:32:11 +0000 (19:32 -0700)]
perf script: Fix segfault when printing callchains
This fixes a bug caused by an unitialized callchain cursor. The crash
frist appeared in:
6f736735e30f ("perf evsel: Require that callchains be resolved before
calling fprintf_{sym,callchain}")
The callchain cursor is a struct that contains pointers, that when
uninitialized will cause unpredictable behavior (usually a crash)
when trying to append to the callchain.
The existing implementation has the following issues:
1. The callchain cursor used is not initialized, resulting in
unpredictable behavior when used.
2. The cursor is declared on the stack. Even if it is properly initalized,
the implmentation will leak memory when the function returns,
since all the references to the callchain_nodes allocated by
callchain_cursor_append will be lost when the cursor goes out of
scope.
3. Storing the cursor on the stack is inefficient. Even if memory is
properly freed when it goes out of scope, a performance penalty
will be incurred due to reallocation of callchain nodes.
callchain_cursor_append is designed to avoid these reallocations
when an existing cursor is reused.
This patch fixes the crash by replacing cursor_callchain with a reference
to the global callchain_cursor which also resolves all 3 issues mentioned
above.
How to reproduce the crash:
$ perf record --call-graph=dwarf stress -t 1 -c 1
$ perf script > /dev/null
Segfault
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
6f736735e30f ("perf evsel: Require that callchains be resolved before calling fprintf_{sym,callchain}")
Link: http://lkml.kernel.org/r/1461119531-2529-1-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Apr 2016 19:31:12 +0000 (16:31 -0300)]
perf trace: Make --pf maj/min/all use callchains too
Forgot about page faults, a software event, when adding support for callchains,
fix it:
# trace --no-syscalls --pf maj --call dwarf
0.000 ( 0.000 ms): Xorg/2068 majfault [sfbSegment1+0x0] => /usr/lib64/xorg/modules/drivers/intel_drv.so@0x11b490 (x.)
sfbSegment1+0x0 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
fbPolySegment32+0x361 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
sna_poly_segment+0x743 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
damagePolySegment+0x77 (/usr/libexec/Xorg)
ProcPolySegment+0xe7 (/usr/libexec/Xorg)
Dispatch+0x25f (/usr/libexec/Xorg)
dix_main+0x3c3 (/usr/libexec/Xorg)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/libexec/Xorg)
0.257 ( 0.000 ms): Xorg/2068 majfault [miZeroClipLine+0x0] => /usr/libexec/Xorg@0x18e830 (x.)
miZeroClipLine+0x0 (/usr/libexec/Xorg)
_fbSegment+0x2c0 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
sfbSegment1+0x67 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
fbPolySegment32+0x361 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
sna_poly_segment+0x743 (/usr/lib64/xorg/modules/drivers/intel_drv.so)
damagePolySegment+0x77 (/usr/libexec/Xorg)
ProcPolySegment+0xe7 (/usr/libexec/Xorg)
Dispatch+0x25f (/usr/libexec/Xorg)
dix_main+0x3c3 (/usr/libexec/Xorg)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
_start+0x29 (/usr/libexec/Xorg)
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8h6ssirw5z15qyhy2lwd6f89@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Apr 2016 19:00:01 +0000 (16:00 -0300)]
perf trace: Extract evsel contructor from perf_evlist__add_pgfault
Prep work for next patches, where we'll need access to the created
evsels, to possibly configure callchains.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2pcgsgnkgellhlcao4aub8tu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrey Ryabinin [Tue, 19 Apr 2016 08:17:27 +0000 (11:17 +0300)]
perf buildid: Fix off-by-one in write_buildid()
write_buildid() increments 'name_len' with intention to take into
account trailing zero byte. However, 'name_len' was already incremented
in machine__write_buildid_table() before. So this leads to
out-of-bounds read in do_write():
$ ./perf record sleep 0
[ perf record: Woken up 1 times to write data ]
=================================================================
==15899==ERROR: AddressSanitizer: global-buffer-overflow on address 0x00000099fc92 at pc 0x7f1aa9c7eab5 bp 0x7fff940f84d0 sp 0x7fff940f7c78
READ of size 19 at 0x00000099fc92 thread T0
#0 0x7f1aa9c7eab4 (/usr/lib/gcc/x86_64-pc-linux-gnu/5.3.0/libasan.so.2+0x44ab4)
#1 0x649c5b in do_write util/header.c:67
#2 0x649c5b in write_padded util/header.c:82
#3 0x57e8bc in write_buildid util/build-id.c:239
#4 0x57e8bc in machine__write_buildid_table util/build-id.c:278
...
0x00000099fc92 is located 0 bytes to the right of global variable '*.LC99' defined in 'util/symbol.c' (0x99fc80) of size 18
'*.LC99' is ascii string '[kernel.kallsyms]'
...
Shadow bytes around the buggy address:
0x00008012bf80: f9 f9 f9 f9 00 00 00 00 00 00 03 f9 f9 f9 f9 f9
=>0x00008012bf90: 00 00[02]f9 f9 f9 f9 f9 00 00 00 00 00 05 f9 f9
0x00008012bfa0: f9 f9 f9 f9 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461053847-5633-1-git-send-email-aryabinin@virtuozzo.com
[ Remove the off-by one at the origin, to keep len(s) == strlen(s) assumption ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Tue, 19 Apr 2016 18:58:22 +0000 (20:58 +0200)]
Merge tag 'perf-core-for-mingo-
20160419' of git://git./linux/kernel/git/acme/linux
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Build fixes:
- Fix 'perf trace' build when DWARF unwind isn't available (Arnaldo Carvalho de Melo)
- Remove x86 references from arch-neutral Build, fixing it in !x86 arches,
reported as breaking the build for powerpc64le in linux-next (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Do memset() variable 'st' using the correct size in the jit code (Colin Ian King)
- Fix postgresql ubuntu 'perf script' install instructions (Chris Phlipot)
- Use callchain_param more thoroughly when checking how callchains were
configured, eventually will be the only way to look for callchain parameters
(Arnaldo Carvalho de Melo)
- Fix some issues in the 'perf test kallsyms' entry (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 21 Apr 2016 13:15:47 +0000 (15:15 +0200)]
x86/perf/rapl: Add missing Broadwell model
With the array aligned as per events/intel/core.c it was fairly
obvious we missed one, add it in.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 21 Apr 2016 13:14:17 +0000 (15:14 +0200)]
x86/perf/rapl: Reorder model numbers
Re-order the model array to match the order in events/intel/core.c,
to easier spot gaps and such.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Srinivas Pandruvada [Sun, 17 Apr 2016 22:03:00 +0000 (15:03 -0700)]
perf/x86/intel/rapl: Support Skylake RAPL domains
Add Skylake client support for RAPL domains. In addition to RAPL domains
in Broadwell clients, it has support for platform domain (aka PSys). The
PSys domain controls the entire SoC instead of just a CPU package. Unlike
package domain, PSys support requires more than just processor level
implementation. The other parts in the system need additional HW level
signaling, which OEMs need to support. When not supported, the energy
counter register in PSys domain returns 0.
Also corrected error in comment for GPU counter, which previously was
DRAM counter.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com
[ Cnverted to model_match stuff. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: jacob.jun.pan@linux.intel.com
Cc: rjw@rjwysocki.net
Link: http://lkml.kernel.org/r/1460930581-29748-2-git-send-email-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wang Nan [Tue, 5 Apr 2016 14:11:18 +0000 (14:11 +0000)]
perf/core: Add ::write_backward attribute to perf event
This patch introduces 'write_backward' bit to perf_event_attr, which
controls the direction of a ring buffer. After set, the corresponding
ring buffer is written from end to beginning. This feature is design to
support reading from overwritable ring buffer.
Ring buffer can be created by mapping a perf event fd. Kernel puts event
records into ring buffer, user tooling like perf fetch them from
address returned by mmap(). To prevent racing between kernel and tooling,
they communicate to each other through 'head' and 'tail' pointers.
Kernel maintains 'head' pointer, points it to the next free area (tail
of the last record). Tooling maintains 'tail' pointer, points it to the
tail of last consumed record (record has already been fetched). Kernel
determines the available space in a ring buffer using these two
pointers to avoid overwrite unfetched records.
By mapping without 'PROT_WRITE', an overwritable ring buffer is created.
Different from normal ring buffer, tooling is unable to maintain 'tail'
pointer because writing is forbidden. Therefore, for this type of ring
buffers, kernel overwrite old records unconditionally, works like flight
recorder. This feature would be useful if reading from overwritable ring
buffer were as easy as reading from normal ring buffer. However,
there's an obscure problem.
The following figure demonstrates a full overwritable ring buffer. In
this figure, the 'head' pointer points to the end of last record, and a
long record 'E' is pending. For a normal ring buffer, a 'tail' pointer
would have pointed to position (X), so kernel knows there's no more
space in the ring buffer. However, for an overwritable ring buffer,
kernel ignore the 'tail' pointer.
(X) head
. |
. V
+------+-------+----------+------+---+
|A....A|B.....B|C........C|D....D| |
+------+-------+----------+------+---+
Record 'A' is overwritten by event 'E':
head
|
V
+--+---+-------+----------+------+---+
|.E|..A|B.....B|C........C|D....D|E..|
+--+---+-------+----------+------+---+
Now tooling decides to read from this ring buffer. However, none of these
two natural positions, 'head' and the start of this ring buffer, are
pointing to the head of a record. Even the full ring buffer can be
accessed by tooling, it is unable to find a position to start decoding.
The first attempt tries to solve this problem AFAIK can be found from
[1]. It makes kernel to maintain 'tail' pointer: updates it when ring
buffer is half full. However, this approach introduces overhead to
fast path. Test result shows a 1% overhead [2]. In addition, this method
utilizes no more tham 50% records.
Another attempt can be found from [3], which allows putting the size of
an event at the end of each record. This approach allows tooling to find
records in a backward manner from 'head' pointer by reading size of a
record from its tail. However, because of alignment requirement, it
needs 8 bytes to record the size of a record, which is a huge waste. Its
performance is also not good, because more data need to be written.
This approach also introduces some extra branch instructions to fast
path.
'write_backward' is a better solution to this problem.
Following figure demonstrates the state of the overwritable ring buffer
when 'write_backward' is set before overwriting:
head
|
V
+---+------+----------+-------+------+
| |D....D|C........C|B.....B|A....A|
+---+------+----------+-------+------+
and after overwriting:
head
|
V
+---+------+----------+-------+---+--+
|..E|D....D|C........C|B.....B|A..|E.|
+---+------+----------+-------+---+--+
In each situation, 'head' points to the beginning of the newest record.
From this record, tooling can iterate over the full ring buffer and fetch
records one by one.
The only limitation that needs to be considered is back-to-back reading.
Due to the non-deterministic of user programs, it is impossible to ensure
the ring buffer keeps stable during reading. Consider an extreme situation:
tooling is scheduled out after reading record 'D', then a burst of events
come, eat up the whole ring buffer (one or multiple rounds). When the
tooling process comes back, reading after 'D' is incorrect now.
To prevent this problem, we need to find a way to ensure the ring buffer
is stable during reading. ioctl(PERF_EVENT_IOC_PAUSE_OUTPUT) is
suggested because its overhead is lower than
ioctl(PERF_EVENT_IOC_ENABLE).
By carefully verifying 'header' pointer, reader can avoid pausing the
ring-buffer. For example:
/* A union of all possible events */
union perf_event event;
p = head = perf_mmap__read_head();
while (true) {
/* copy header of next event */
fetch(&event.header, p, sizeof(event.header));
/* read 'head' pointer */
head = perf_mmap__read_head();
/* check overwritten: is the header good? */
if (!verify(sizeof(event.header), p, head))
break;
/* copy the whole event */
fetch(&event, p, event.header.size);
/* read 'head' pointer again */
head = perf_mmap__read_head();
/* is the whole event good? */
if (!verify(event.header.size, p, head))
break;
p += event.header.size;
}
However, the overhead is high because:
a) In-place decoding is not safe.
Copying-verifying-decoding is required.
b) Fetching 'head' pointer requires additional synchronization.
(From Alexei Starovoitov:
Even when this trick works, pause is needed for more than stability of
reading. When we collect the events into overwrite buffer we're waiting
for some other trigger (like all cpu utilization spike or just one cpu
running and all others are idle) and when it happens the buffer has
valuable info from the past. At this point new events are no longer
interesting and buffer should be paused, events read and unpaused until
next trigger comes.)
This patch utilizes event's default overflow_handler introduced
previously. perf_event_output_backward() is created as the default
overflow handler for backward ring buffers. To avoid extra overhead to
fast path, original perf_event_output() becomes __perf_event_output()
and marked '__always_inline'. In theory, there's no extra overhead
introduced to fast path.
Performance testing:
Calling
3000000 times of 'close(-1)', use gettimeofday() to check
duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture
system calls. In ns.
Testing environment:
CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz
Kernel : v4.5.0
MEAN STDVAR
BASE 800214.950 2853.083
PRE1
2253846.700 9997.014
PRE2
2257495.540 8516.293
POST
2250896.100 8933.921
Where 'BASE' is pure performance without capturing. 'PRE1' is test
result of pure 'v4.5.0' kernel. 'PRE2' is test result before this
patch. 'POST' is test result after this patch. See [4] for the detailed
experimental setup.
Considering the stdvar, this patch doesn't introduce performance
overhead to the fast path.
[1] http://lkml.iu.edu/hypermail/linux/kernel/1304.1/04584.html
[2] http://lkml.iu.edu/hypermail/linux/kernel/1307.1/00535.html
[3] http://lkml.iu.edu/hypermail/linux/kernel/1512.0/01265.html
[4] http://lkml.kernel.org/g/
56F89DCD.
1040202@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: <acme@kernel.org>
Cc: <pi3orama@163.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1459865478-53413-1-git-send-email-wangnan0@huawei.com
[ Fixed the changelog some more. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Fri, 15 Apr 2016 07:53:45 +0000 (00:53 -0700)]
perf/x86/intel: Add LBR filter support for Silvermont and Airmont CPUs
LBR filtering is also supported on the Silvermont and Airmont
microarchitectures. The layout of MSR_LBR_SELECT is the same as Nehalem.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1460706825-46163-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Fri, 15 Apr 2016 07:42:47 +0000 (00:42 -0700)]
perf/x86/intel: Add Goldmont CPU support
Add perf core PMU support for Intel Goldmont CPU cores:
- The init code is based on Silvermont.
- There is a new cache event list, based on the Silvermont cache event list.
- Goldmont has 32 LBR entries. It also uses new LBRv6 format, which
report the cycle information using upper 16-bit of the LBR_TO.
- It's recommended to use CPU_CLK_UNHALTED.CORE_P + NPEBS for precise cycles.
For details, please refer to the latest SDM058:
http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-vol-3b-part-2-manual.pdf
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1460706167-45320-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sat, 23 Apr 2016 12:12:10 +0000 (14:12 +0200)]
Merge branch 'perf/urgent' into perf/core, to resolve conflict
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Mon, 4 Apr 2016 07:57:40 +0000 (09:57 +0200)]
perf/core: Make sysctl_perf_cpu_time_max_percent conform to documentation
Markus reported that 0 should also disable the throttling we per
Documentation/sysctl/kernel.txt.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes:
91a612eea9a3 ("perf/core: Fix dynamic interrupt throttle")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Srinivas Pandruvada [Sun, 17 Apr 2016 15:43:29 +0000 (08:43 -0700)]
perf/x86/intel/rapl: Add missing Haswell model
Added one missing Haswell model.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@alien8.de
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1460907809-11897-1-git-send-email-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi Kleen [Fri, 15 Apr 2016 20:25:33 +0000 (13:25 -0700)]
perf/x86/intel: Add model number for Skylake Server to perf
Everything the same as base Skylake, just a new model number.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1460751933-2264-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Tue, 19 Apr 2016 15:22:25 +0000 (12:22 -0300)]
perf test: Add missing verbose output explaining the reason for failure
One of the branches leading to an error had no debug message emitted,
fix it, the new lines are:
# perf test -v kallsyms
<SNIP>
0xffffffff81001000: diff name v: xen_hypercall_set_trap_table k: hypercall_page
0xffffffff810691f0: diff name v: try_to_free_pud_page k: try_to_free_pmd_page
<SNIP>
0xffffffff8150bb20: diff name v: wakeup_expire_count_show.part.5 k: wakeup_active_count_show.part.7
0xffffffff816bc7f0: diff name v: phys_switch_id_show.part.11 k: phys_port_name_show.part.12
0xffffffff817bbb90: diff name v: __do_softirq k: __softirqentry_text_start
<SNIP>
This in turn exercises another bug, still under investigation, because those
aliases _are_ in kallsyms, with the same name...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
ab414dcda8fa ("perf test: Fixup aliases checking in the 'vmlinux matches kallsyms' test")
Link: http://lkml.kernel.org/n/tip-5fhea7a54a54gsmagu9obpr4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Apr 2016 15:16:55 +0000 (12:16 -0300)]
perf test: Ignore kcore files in the "vmlinux matches kallsyms" test
Before:
# perf test -v kallsyms
<SNIP>
Maps only in vmlinux:
ffffffff81d5e000-
ffffffff81ec3ac8 115e000 [kernel].init.text
ffffffff81ec3ac8-
ffffffffa0000000 12c3ac8 [kernel].exit.text
ffffffffa0000000-
ffffffffa000c000 0 [fjes]
ffffffffa000c000-
ffffffffa0017000 0 [video]
ffffffffa0017000-
ffffffffa001c000 0 [grace]
<SNIP>
ffffffffa0a7f000-
ffffffffa0ba5000 0 [xfs]
ffffffffa0ba5000-
ffffffffffffffff 0 [veth]
Maps in vmlinux with a different name in kallsyms:
Maps only in kallsyms:
ffff880000100000-
ffff88001000b000 80000103000 [kernel.kallsyms]
ffff88001000b000-
ffff880100000000 8001000e000 [kernel.kallsyms]
ffff880100000000-
ffffc90000000000 80100003000 [kernel.kallsyms]
<SNIP>
ffffffffa0000000-
ffffffffff600000 7fffa0003000 [kernel.kallsyms]
ffffffffff600000-
ffffffffffffffff 7fffff603000 [kernel.kallsyms]
test child finished with -1
---- end ----
vmlinux symtab matches kallsyms: FAILED!
#
After:
# perf test -v 1
1: vmlinux symtab matches kallsyms :
--- start ---
test child forked, pid 7058
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.6.0-rc1+/build/vmlinux for symbols
0xffffffff81076870: diff end addr for aesni_gcm_dec v: 0xffffffff810791f2 k: 0xffffffff81076902
0xffffffff81079200: diff end addr for aesni_gcm_enc v: 0xffffffff8107bb03 k: 0xffffffff81079292
0xffffffff8107e8d0: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffff81083e76 k: 0xffffffff8107e943
0xffffffff81083e80: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffff81089611 k: 0xffffffff81083ef3
0xffffffff81089990: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffff8108e7c4 k: 0xffffffff81089a03
0xffffffff8108e7d0: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffff810937ef k: 0xffffffff8108e843
Maps only in vmlinux:
ffffffff81d5e000-
ffffffff81ec3ac8 115e000 [kernel].init.text
ffffffff81ec3ac8-
ffffffffa0000000 12c3ac8 [kernel].exit.text
Maps in vmlinux with a different name in kallsyms:
Maps only in kallsyms:
test child finished with -1
---- end ----
vmlinux symtab matches kallsyms: FAILED!
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
8e0cf965f95e ("perf symbols: Add support for reading from /proc/kcore")
Link: http://lkml.kernel.org/n/tip-n6vrwt9t89w8k769y349govx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Apr 2016 15:12:49 +0000 (12:12 -0300)]
perf symbols: Allow loading kallsyms without considering kcore files
Before the support for using /proc/kcore was introduced, the kallsyms
routines used /proc/modules and the first 'perf test' entry expected
finding maps for each module in the system, which is not the case with
the kcore code. Provide a way to ignore kcore files so that the test can
have its expectations met.
Improving the test to cover kcore files as well needs to be done.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ek5urnu103dlhfk4l6pcw041@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Apr 2016 15:01:51 +0000 (12:01 -0300)]
perf build: Remove x86 references from arch-neutral Build
It will already be dealt with generating the syscalltbl.c file in the
x86 arch specific Build files, namely via 'archheaders'.
This fixes the build on !x86 arches, as reported for powerpcle
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
1b700c997500 ("perf tools: Build syscall table .c header from kernel's syscall_64.tbl")
Link: http://lkml.kernel.org/r/20160415212831.GT9056@kernel.org
[ Removed the syscalltbl.o altogether, as per Jiri's suggestion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Colin Ian King [Mon, 18 Apr 2016 23:07:18 +0000 (00:07 +0100)]
perf jit: memset() variable 'st' using the correct size
The current code is memsetting the 'struct stat' variable 'st' with the size of
'stat' (which turns out to be 1 byte) rather than the size of variable 'sz'.
Committer notes:
sizeof(function) isn't valid, the result depends on the compiler used, with
gcc, enabling pedantic warnings we get:
$ cat sizeof_function.c
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <stdio.h>
int main(void)
{
printf("sizeof(stat)=%zd, stat=%p\n", sizeof(stat), stat);
return 0;
}
$ readelf -sW sizeof_function | grep -w stat
49:
0000000000400630 16 FUNC WEAK HIDDEN 13 stat
$ cc -pedantic sizeof_function.c -o sizeof_function
sizeof_function.c: In function ‘main’:
sizeof_function.c:8:46: warning: invalid application of ‘sizeof’ to a function type [-Wpointer-arith]
printf("sizeof(stat)=%zd, stat=%p\n", sizeof(stat), stat);
^
$ ./sizeof_function
sizeof(stat)=1, stat=0x400630
$
Standard C, section 6.5.3.4:
"The sizeof operator shall not be applied to an expression that has function
type or an incomplete type, to the parenthesized name of such a type,
or to an expression that designates a bit-field member."
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes:
9b07e27f88b9 ("perf inject: Add jitdump mmap injection support")
Link: http://lkml.kernel.org/r/1461020838-9260-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Chris Phlipot [Tue, 19 Apr 2016 08:56:02 +0000 (01:56 -0700)]
perf script: Fix postgresql ubuntu install instructions
The current instructions for setting up an Ubuntu system for using the
export-to-postgresql.py script are incorrect.
The instructions in the script have been updated to work on newer
versions of ubuntu.
-Add missing dependencies to apt-get command:
python-pyside.qtsql, libqt4-sql-psql
-Add '-s' option to createuser command to force the user to be a
superuser since the command doesn't prompt as indicated in the
current instructions.
Tested on: Ubuntu 14.04, Ubuntu 16.04(beta)
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461056164-14914-3-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Tue, 19 Apr 2016 06:41:59 +0000 (08:41 +0200)]
Merge tag 'perf-urgent-for-mingo-
20160418' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull a perf/urgent fix from Arnaldo Carvalho de Melo:
- Fix segfault tracing transactions in Intel PT (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Mon, 18 Apr 2016 15:30:16 +0000 (12:30 -0300)]
perf top: Use callchain_param.enabled instead of symbol_conf.use_callchain
One more step in the direction of using just callchain_param for
callchain parameters.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3b1o9kb2dc94zldz0klckti6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 18 Apr 2016 15:24:41 +0000 (12:24 -0300)]
perf hists browser: Fold two consecutive symbol_conf.use_callchain ifs
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-u701i6qpecgm9jiat52i8l98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 18 Apr 2016 15:09:08 +0000 (12:09 -0300)]
perf tools: Ditch record_opts.callgraph_set
We have callchain_param.enabled for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-silwqjc2t25ls42dsvg28pp5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 18 Apr 2016 14:54:31 +0000 (11:54 -0300)]
perf report: Use callchain_param.enabled instead of tool specific knob
We have callchain_param.enabled, so no need to have something just for
'perf report' to do the same thing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wbeisubpualwogwi5u8utnt1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 18 Apr 2016 14:53:07 +0000 (11:53 -0300)]
perf callchain: Set callchain_param.enabled when parsing --call-graph
Trying to move in the direction of using callchain_param for all
callchain parameters, eventually ditching them from symbol_conf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kixllia6r26mz45ng056zq7z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 18 Apr 2016 14:31:46 +0000 (11:31 -0300)]
perf script: Check sample->callchain before using it
Found by code inspection, while looking at thread__resolve_callchain()
callsites, one had it, the other didn't.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-6r8i2afd3523thuuaxl39yhk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 18 Apr 2016 13:35:03 +0000 (10:35 -0300)]
perf evsel: Add missign class prefix to has_branch_stack method
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5i07ivw1yjsweb7gztr255jd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 18 Apr 2016 10:57:48 +0000 (13:57 +0300)]
perf intel-pt: Fix segfault tracing transactions
Tracing a workload that uses transactions gave a seg fault as follows:
perf record -e intel_pt// workload
perf report
Program received signal SIGSEGV, Segmentation fault.
0x000000000054b58c in intel_pt_reset_last_branch_rb (ptq=0x1a36110)
at util/intel-pt.c:929
929 ptq->last_branch_rb->nr = 0;
(gdb) p ptq->last_branch_rb
$1 = (struct branch_stack *) 0x0
(gdb) up
1148 intel_pt_reset_last_branch_rb(ptq);
(gdb) l
1143 if (ret)
1144 pr_err("Intel Processor Trace: failed to deliver transaction event
1145 ret);
1146
1147 if (pt->synth_opts.callchain)
1148 intel_pt_reset_last_branch_rb(ptq);
1149
1150 return ret;
1151 }
1152
(gdb) p pt->synth_opts.callchain
$2 = true
(gdb)
(gdb) bt
#0 0x000000000054b58c in intel_pt_reset_last_branch_rb (ptq=0x1a36110)
#1 0x000000000054c1e0 in intel_pt_synth_transaction_sample (ptq=0x1a36110)
#2 0x000000000054c5b2 in intel_pt_sample (ptq=0x1a36110)
Caused by checking the 'callchain' flag when it should have been the
'last_branch' flag. Fix that.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes:
f14445ee72c5 ("perf intel-pt: Support generating branch stack")
Link: http://lkml.kernel.org/r/1460977068-11566-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Mon, 18 Apr 2016 02:13:32 +0000 (19:13 -0700)]
Linux 4.6-rc4
Linus Torvalds [Sun, 17 Apr 2016 19:30:06 +0000 (12:30 -0700)]
Merge tag 'dm-4.6-fix-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Fix for earlier 4.6-rc4 stable@ commit that introduced improper use of
write lock in cmd_read_lock() -- due to cut-n-paste gone awry (and
sparse didn't catch it)"
* tag 'dm-4.6-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache metadata: fix cmd_read_lock() acquiring write lock
Ahmed Samy [Sun, 17 Apr 2016 05:37:09 +0000 (05:37 +0000)]
dm cache metadata: fix cmd_read_lock() acquiring write lock
Commit
9567366fefdd ("dm cache metadata: fix READ_LOCK macros and
cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in
cmd_read_lock(), yet up_read() is used to release the lock in
READ_UNLOCK(). Fix it.
Fixes:
9567366fefdd ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Samy <f.fallen45@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Linus Torvalds [Sun, 17 Apr 2016 03:59:06 +0000 (20:59 -0700)]
Merge tag 'char-misc-4.6-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc driver fixes for 4.6-rc4. Full details
are in the shortlog, nothing major here.
These have all been in linux-next for a while with no reported issues"
* tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: do not leak free page on kmalloc failure
lkdtm: fix memory leak of base
lkdtm: fix memory leak of val
extcon: palmas: Drop stray IRQF_EARLY_RESUME flag
Linus Torvalds [Sun, 17 Apr 2016 03:53:50 +0000 (20:53 -0700)]
Merge tag 'driver-core-4.6-rc4' of git://git./linux/kernel/git/gregkh/driver-core
Pull misc fixes from Greg KH:
"Here are three small fixes for 4.6-rc4.
Two fix up some lz4 issues with big endian systems, and the remaining
one resolves a minor debugfs issue that was reported.
All have been in linux-next with no reported issues"
* tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
lib: lz4: cleanup unaligned access efficiency detection
lib: lz4: fixed zram with lz4 on big endian machines
debugfs: Make automount point inodes permanently empty
Linus Torvalds [Sun, 17 Apr 2016 03:48:14 +0000 (20:48 -0700)]
Merge tag 'usb-4.6-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB fixes for 4.6-rc4.
Mostly xhci fixes for reported issues, a UAS bug that has hit a number
of people, including stable tree users, and a few other minor things.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: hcd: out of bounds access in for_each_companion
USB: uas: Add a new NO_REPORT_LUNS quirk
USB: uas: Limit qdepth at the scsi-host level
doc: usb: Fix typo in gadget_multi documentation
usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
usb: xhci: fix wild pointers in xhci_mem_cleanup
usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys
usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT
xhci: resume USB 3 roothub first
usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
cdc-acm: fix crash if flushed with nothing buffered
Linus Torvalds [Sat, 16 Apr 2016 22:52:38 +0000 (15:52 -0700)]
Merge tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This time we have some odd fixes in hsu, edma, omap and xilinx.
Usual fixes and nothing special"
* tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: fix master selection
dmaengine: edma: special case slot limit workaround
dmaengine: edma: Remove dynamic TPTC power management feature
dmaengine: vdma: don't crash when bad channel is requested
dmaengine: omap-dma: Do not suppress interrupts for memcpy
dmaengine: omap-dma: Fix polled channel completion detection and handling
dmaengine: hsu: correct use of channel status register
dmaengine: hsu: correct residue calculation of active descriptor
dmaengine: hsu: set HSU_CH_MTSR to memory width
Linus Torvalds [Sat, 16 Apr 2016 22:43:19 +0000 (15:43 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixlet from Ingo Molnar:
"Fixes a build warning on certain Kconfig combinations"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix print_collision() unused warning
Linus Torvalds [Sat, 16 Apr 2016 22:37:05 +0000 (15:37 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI fix from Ingo Molnar:
"An arm64 boot crash fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping
Vinod Koul [Sat, 16 Apr 2016 17:22:03 +0000 (22:52 +0530)]
Merge branch 'fix/edma' into fixes
Vinod Koul [Sat, 16 Apr 2016 17:15:26 +0000 (22:45 +0530)]
Merge branch 'fix/xilinx' into fixes
Vinod Koul [Sat, 16 Apr 2016 17:15:17 +0000 (22:45 +0530)]
Merge branch 'fix/omap' into fixes
Vinod Koul [Sat, 16 Apr 2016 17:14:32 +0000 (22:44 +0530)]
Merge branch 'fix/hsu' into fixes
Arnaldo Carvalho de Melo [Sat, 16 Apr 2016 12:36:32 +0000 (09:36 -0300)]
perf trace: Fix build when DWARF unwind isn't available
The variable is initialized and then conditionally set to a different
value, but not used when DWARF unwinding is not available, bummer, write
1000 times: "Run make -C tools/perf build-test"...
builtin-trace.c: In function ‘cmd_trace’:
builtin-trace.c:3112:6: error: variable ‘max_stack_user_set’ set but not
used [-Werror=unused-but-set-variable]
bool max_stack_user_set = true;
^
cc1: all warnings being treated as err
Fix it by marking it as __maybe_unused.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
056149932602 ("perf trace: Make --(min,max}-stack imply "--call-graph dwarf"")
Link: http://lkml.kernel.org/n/tip-85r40c5hhv6jnmph77l1hgsr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 16 Apr 2016 09:09:57 +0000 (11:09 +0200)]
Merge tag 'perf-core-for-mingo-
20160415' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Wire the callchain unwinding "max-stack" now to 'perf script --max-stack',
allowing to limit the depth of callchains, possibly reducing processing
time (Arnaldo Carvalho de Melo)
- Ditto for 'perf trace --max-stack' (Arnaldo Carvalho de Melo)
- Introduce a --min-stack filter for 'perf trace', to show syscalls that
had a userspace callchain leading to it at least min-stack deep (Arnaldo Carvalho de Melo)
- Make 'perf trace' work with multiple threads and the --duration filter,
i.e. do not print the start of an interrupted syscall followed by ...
to print interrupts from other threads, as we need to wait the sys_exit
syscall tracepoint to calculate the duration, duh. (Arnaldo Carvalho de Melo)
System wide --duration now works as expected:
[root@jouet ~]# trace --duration 100
152.393 (145.147 ms): Timer/24358 futex(uaddr: 0x7f5ed98e56cc, op: WAIT_BITSET|PRIV|CLKRT, val:
7055125, utime: 0x7f5ecdbfec30, val3:
4294967295) = -1 ETIMEDOUT Connection timed out
152.438 (145.040 ms): firefox/24321 poll(ufds: 0x7f5ec388b460, nfds: 6, timeout_msecs:
4294967295) = 1
358.580 (158.279 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x7ffdcbb63610) = 0 Timeout
358.687 (148.285 ms): gnome-terminal/2711 poll(ufds: 0x55b7e6811ad0, nfds: 15, timeout_msecs: 249) = 1
370.150 (169.569 ms): gnome-shell/2287 poll(ufds: 0x55e623d65490, nfds: 86, timeout_msecs:
4294967295) = 1
- Now 'perf trace's --max-stack and --min-stack will automatically set
"--call-graph dwarf", if --call-graph is not present on the command line:
[root@jouet ~]# perf trace -e nanosleep --max-stack 3 usleep 1
0.299 ( 0.057 ms): usleep/29658 nanosleep(rqtp: 0x7fff80f3b230) = 0
__nanosleep+0x10 (/usr/lib64/libc-2.22.so)
usleep+0x34 (/usr/lib64/libc-2.22.so)
main+0x1eb (/usr/bin/usleep)
[root@jouet ~]#
- Bump 'perf trace --mmap-pages' for root when using callchains and not
specifying --mmap-pages explicitely (Arnaldo Carvalho de Melo)
Build fixes:
- The python binding object had missing symbols, to some refactoring
to fix that (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Fri, 15 Apr 2016 22:44:10 +0000 (15:44 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes for the current series. This contains:
- Two fixes for NVMe:
One fixes a reset race that can be triggered by repeated
insert/removal of the module.
The other fixes an issue on some platforms, where we get probe
timeouts since legacy interrupts isn't working. This used not to
be a problem since we had the worker thread poll for completions,
but since that was killed off, it means those poor souls can't
successfully probe their NVMe device. Use a proper IRQ check and
probe (msi-x -> msi ->legacy), like most other drivers to work
around this. Both from Keith.
- A loop corruption issue with offset in iters, from Ming Lei.
- A fix for not having the partition stat per cpu ref count
initialized before sending out the KOBJ_ADD, which could cause user
space to access the counter prior to initialization. Also from
Ming Lei.
- A fix for using the wrong congestion state, from Kaixu Xia"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: loop: fix filesystem corruption in case of aio/dio
NVMe: Always use MSI/MSI-x interrupts
NVMe: Fix reset/remove race
writeback: fix the wrong congested state variable definition
block: partition: initialize percpuref before sending out KOBJ_ADD
Linus Torvalds [Fri, 15 Apr 2016 22:34:27 +0000 (15:34 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Ross Zwisler:
"Two fixes:
- Fix memcpy_from_pmem() to fallback to memcpy() for architectures
where CONFIG_ARCH_HAS_PMEM_API=n.
- Add a comment explaining why we write data twice when clearing
poison in pmem_do_bvec().
This has passed a boot test on an X86_32 config, which was the
architecture where issue #1 above was first noticed"
Dan Williams adds:
"We're giving this multi-maintainer setup a shot, so expect libnvdimm
pull requests from either Ross or I going forward"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, pmem: clarify the write+clear_poison+write flow
pmem: fix BUG() error in pmem.h:48 on X86_32
Linus Torvalds [Fri, 15 Apr 2016 22:25:09 +0000 (15:25 -0700)]
Merge tag 'for-linus-
20160415' of git://git.infradead.org/linux-mtd
Pull MTD fix from Brian Norris:
"One MTD fix for v4.6-rc4:
In the v4.4 cycle, we relaxed the requirement for assigning
mtd->owner, but we didn't remove this error case. It's hit only
by drivers that are both:
(a) using nand_scan() directly
and
(b) built as modules
We haven't seen explicit complaints about this (most use cases don't
fit one or both of the above), but we should definitely not be
BUG()'ing here"
* tag 'for-linus-
20160415' of git://git.infradead.org/linux-mtd:
mtd: nand: Drop mtd.owner requirement in nand_scan
Linus Torvalds [Fri, 15 Apr 2016 22:10:32 +0000 (15:10 -0700)]
Merge tag 'mmc-v4.6-rc3' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.6 rc4.
Regarding the fix for the regression about mmcblk device indexes. The
approach taken to solve the problem seems to be good enough. There
were some discussions around the solution, but it seems like people
were happy about it in the end.
MMC core:
- Restore similar old behaviour when assigning mmcblk device indexes
MMC host:
- tegra: Disable UHS-I modes for Tegra124 to fix regression"
* tag 'mmc-v4.6-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: tegra: Disable UHS-I modes for Tegra124
mmc: block: Use the mmc host device index as the mmcblk device index
Linus Torvalds [Fri, 15 Apr 2016 21:59:28 +0000 (14:59 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This contains fixes for exynos, amdgpu, radeon, i915 and qxl.
It also contains some fixes to the core drm edid parser.
qxl:
- fix for a cursor hotspot issue
radeon:
- some MST fixes that I've been running locally and make my monitor a
bit happier
exynos:
- fix some regressions and build fixes
amdgpu:
- a couple of small fixes
i915:
- two DP MST fixes and a couple of other regression fixes
Nothing too out of the ordinary or surprising at this point"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependency
drm/exynos: fix a warning message
drm/exynos: mic: fix an error code
drm/exynos: fimd: fix broken dp_clock control
drm/exynos: build fbdev code conditionally
drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_set
drm/exynos: fix error handling in exynos_drm_subdrv_open
drm/amd/amdgpu: fix irq domain remove for tonga ih
drm/i915: fix deadlock on lid open
drm/radeon: use helper for mst connector dpms.
drm/radeon/mst: port some MST setup code from DAL.
drm/amdgpu: add invisible pin size statistic
drm/edid: Fix DMT 1024x768@43Hz (interlaced) timings
drm/i915: Exit cherryview_irq_handler() after one pass
drm/i915: Call intel_dp_mst_resume() before resuming displays
drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
drm/edid: Fix parsing of EDID 1.4 Established Timings III descriptor
drm/edid: Fix EDID Established Timings I and II
drm/qxl: fix cursor position with non-zero hotspot
Linus Torvalds [Fri, 15 Apr 2016 21:51:45 +0000 (14:51 -0700)]
Merge branch 'parisc-4.6-4' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc ftrace fixes from Helge Deller:
"This is (most likely) the last pull request for v4.6 for the parisc
architecture.
It fixes the FTRACE feature for parisc, which is horribly broken since
quite some time and doesn't even compile. This patch just fixes the
bare minimum (it actually removes more lines than it adds), so that
the function tracer works again on 32- and 64bit kernels.
I've queued up additional patches on top of this patch which e.g. add
the syscall tracer, but those have to wait for the merge window for
v4.7."
* 'parisc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix ftrace function tracer
Dan Williams [Fri, 15 Apr 2016 02:40:47 +0000 (19:40 -0700)]
libnvdimm, pmem: clarify the write+clear_poison+write flow
The ACPI specification does not specify the state of data after a clear
poison operation. Potential future libnvdimm bus implementations for
other architectures also might not specify or disagree on the state of
data after clear poison. Clarify why we write twice.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Arnaldo Carvalho de Melo [Fri, 15 Apr 2016 20:52:34 +0000 (17:52 -0300)]
perf trace: Bump --mmap-pages when --call-graph is used by the root user
To reduce the chances we'll overflow the mmap buffer, manual fine tuning
trumps this.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wxygbxmp1v9mng1ea28wet02@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 15 Apr 2016 20:46:31 +0000 (17:46 -0300)]
perf evlist: Expose perf_event_mlock_kb_in_pages() helper
When the user doesn't set --mmap-pages, perf_evlist__mmap() will do it
by reading the maximum possible for a non-root user from the
/proc/sys/kernel/perf_event_mlock_kb file.
Expose that function so that 'perf trace' can, for root users, to bump
mmap-pages to a higher value for root, based on the contents of this
proc file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xay69plylwibpb3l4isrpl1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 15 Apr 2016 19:41:19 +0000 (16:41 -0300)]
perf trace: Make --(min,max}-stack imply "--call-graph dwarf"
If one uses:
# perf trace --min-stack 16
Then it implicitly means that callgraphs should be enabled, and the best
option in terms of widespread availability is "dwarf".
Further work needed to choose a better alternative, LBR, in capable
systems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xtjmnpkyk42npekxz3kynzmx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 15 Apr 2016 19:37:17 +0000 (16:37 -0300)]
perf record: Export record_opts based callchain parsing helper
To be able to call it outside option parsing, like when setting a
default --call-graph parameter in 'perf trace' when just --min-stack is
used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xay69plylwibpb3l4isrpl1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 15 Apr 2016 14:10:31 +0000 (11:10 -0300)]
perf trace: Introduce --min-stack filter
Counterpart to --max-stack, to help focusing on deeply nested calls. Can
be combined with --duration, etc.
E.g.:
System wide syscall tracing looking for call stacks longer than 66:
# trace --mmap-pages 32768 --filter-pid 2711 --call-graph dwarf,16384 --min-stack 66
Or more compactly:
# trace -m 32768 --filt 2711 --call dwarf,16384 --min-st 66
363.027 ( 0.002 ms): gnome-shell/2287 poll(ufds: 0x7ffc5ea24230, nfds: 1, timeout_msecs:
4294967295 ) = 1
[0xf6fdd] (/usr/lib64/libc-2.22.so)
_xcb_conn_wait+0x92 (/usr/lib64/libxcb.so.1.1.0)
_xcb_out_send+0x4d (/usr/lib64/libxcb.so.1.1.0)
xcb_writev+0x45 (/usr/lib64/libxcb.so.1.1.0)
_XSend+0x19e (/usr/lib64/libX11.so.6.3.0)
_XReply+0x82 (/usr/lib64/libX11.so.6.3.0)
XSync+0x4d (/usr/lib64/libX11.so.6.3.0)
dri3_bind_tex_image+0x42 (/usr/lib64/libGL.so.1.2.0)
_cogl_winsys_texture_pixmap_x11_update+0x117 (/usr/lib64/libcogl.so.20.4.1)
_cogl_texture_pixmap_x11_update+0x67 (/usr/lib64/libcogl.so.20.4.1)
_cogl_texture_pixmap_x11_pre_paint+0x13 (/usr/lib64/libcogl.so.20.4.1)
_cogl_pipeline_layer_pre_paint+0x5e (/usr/lib64/libcogl.so.20.4.1)
_cogl_rectangles_validate_layer_cb+0x1b (/usr/lib64/libcogl.so.20.4.1)
cogl_pipeline_foreach_layer+0xbe (/usr/lib64/libcogl.so.20.4.1)
_cogl_framebuffer_draw_multitextured_rectangles+0x77 (/usr/lib64/libcogl.so.20.4.1)
cogl_framebuffer_draw_multitextured_rectangle+0x51 (/usr/lib64/libcogl.so.20.4.1)
paint_clipped_rectangle+0xb6 (/usr/lib64/libmutter.so.0.0.0)
meta_shaped_texture_paint+0x3e3 (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_window_actor_paint+0x14b (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_window_group_paint+0x19f (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
[0x3d970] (/usr/lib64/gnome-shell/libgnome-shell.so)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_stage_paint+0x3a (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_stage_paint+0x45 (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0x164 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
_clutter_stage_do_paint+0x17b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_stage_cogl_redraw+0x496 (/usr/lib64/libclutter-1.0.so.0.2400.2)
_clutter_stage_do_update+0x117 (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_clock_dispatch+0x169 (/usr/lib64/libclutter-1.0.so.0.2400.2)
g_main_context_dispatch+0x15a (/usr/lib64/libglib-2.0.so.0.4600.2)
g_main_context_iterate.isra.29+0x1e0 (/usr/lib64/libglib-2.0.so.0.4600.2)
g_main_loop_run+0xc2 (/usr/lib64/libglib-2.0.so.0.4600.2)
meta_run+0x2c (/usr/lib64/libmutter.so.0.0.0)
main+0x3f7 (/usr/bin/gnome-shell)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
[0x2909] (/usr/bin/gnome-shell)
363.038 ( 0.006 ms): gnome-shell/2287 writev(fd: 5<socket:[32540]>, vec: 0x7ffc5ea243a0, vlen: 3 ) = 4
__GI___writev+0x2d (/usr/lib64/libc-2.22.so)
_xcb_conn_wait+0x359 (/usr/lib64/libxcb.so.1.1.0)
_xcb_out_send+0x4d (/usr/lib64/libxcb.so.1.1.0)
xcb_writev+0x45 (/usr/lib64/libxcb.so.1.1.0)
_XSend+0x19e (/usr/lib64/libX11.so.6.3.0)
_XReply+0x82 (/usr/lib64/libX11.so.6.3.0)
XSync+0x4d (/usr/lib64/libX11.so.6.3.0)
dri3_bind_tex_image+0x42 (/usr/lib64/libGL.so.1.2.0)
_cogl_winsys_texture_pixmap_x11_update+0x117 (/usr/lib64/libcogl.so.20.4.1)
_cogl_texture_pixmap_x11_update+0x67 (/usr/lib64/libcogl.so.20.4.1)
_cogl_texture_pixmap_x11_pre_paint+0x13 (/usr/lib64/libcogl.so.20.4.1)
_cogl_pipeline_layer_pre_paint+0x5e (/usr/lib64/libcogl.so.20.4.1)
_cogl_rectangles_validate_layer_cb+0x1b (/usr/lib64/libcogl.so.20.4.1)
cogl_pipeline_foreach_layer+0xbe (/usr/lib64/libcogl.so.20.4.1)
_cogl_framebuffer_draw_multitextured_rectangles+0x77 (/usr/lib64/libcogl.so.20.4.1)
cogl_framebuffer_draw_multitextured_rectangle+0x51 (/usr/lib64/libcogl.so.20.4.1)
paint_clipped_rectangle+0xb6 (/usr/lib64/libmutter.so.0.0.0)
meta_shaped_texture_paint+0x3e3 (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_window_actor_paint+0x14b (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_window_group_paint+0x19f (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
[0x3d970] (/usr/lib64/gnome-shell/libgnome-shell.so)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_stage_paint+0x3a (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_stage_paint+0x45 (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0x164 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
_clutter_stage_do_paint+0x17b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_stage_cogl_redraw+0x496 (/usr/lib64/libclutter-1.0.so.0.2400.2)
_clutter_stage_do_update+0x117 (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_clock_dispatch+0x169 (/usr/lib64/libclutter-1.0.so.0.2400.2)
g_main_context_dispatch+0x15a (/usr/lib64/libglib-2.0.so.0.4600.2)
g_main_context_iterate.isra.29+0x1e0 (/usr/lib64/libglib-2.0.so.0.4600.2)
g_main_loop_run+0xc2 (/usr/lib64/libglib-2.0.so.0.4600.2)
meta_run+0x2c (/usr/lib64/libmutter.so.0.0.0)
main+0x3f7 (/usr/bin/gnome-shell)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
[0x2909] (/usr/bin/gnome-shell)
363.086 ( 0.042 ms): gnome-shell/2287 poll(ufds: 0x7ffc5ea24250, nfds: 1, timeout_msecs:
4294967295 ) = 1
[0xf6fdd] (/usr/lib64/libc-2.22.so)
_xcb_conn_wait+0x92 (/usr/lib64/libxcb.so.1.1.0)
wait_for_reply+0xb7 (/usr/lib64/libxcb.so.1.1.0)
xcb_wait_for_reply+0x61 (/usr/lib64/libxcb.so.1.1.0)
_XReply+0x127 (/usr/lib64/libX11.so.6.3.0)
XSync+0x4d (/usr/lib64/libX11.so.6.3.0)
dri3_bind_tex_image+0x42 (/usr/lib64/libGL.so.1.2.0)
_cogl_winsys_texture_pixmap_x11_update+0x117 (/usr/lib64/libcogl.so.20.4.1)
_cogl_texture_pixmap_x11_update+0x67 (/usr/lib64/libcogl.so.20.4.1)
_cogl_texture_pixmap_x11_pre_paint+0x13 (/usr/lib64/libcogl.so.20.4.1)
_cogl_pipeline_layer_pre_paint+0x5e (/usr/lib64/libcogl.so.20.4.1)
_cogl_rectangles_validate_layer_cb+0x1b (/usr/lib64/libcogl.so.20.4.1)
cogl_pipeline_foreach_layer+0xbe (/usr/lib64/libcogl.so.20.4.1)
_cogl_framebuffer_draw_multitextured_rectangles+0x77 (/usr/lib64/libcogl.so.20.4.1)
cogl_framebuffer_draw_multitextured_rectangle+0x51 (/usr/lib64/libcogl.so.20.4.1)
paint_clipped_rectangle+0xb6 (/usr/lib64/libmutter.so.0.0.0)
meta_shaped_texture_paint+0x3e3 (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_window_actor_paint+0x14b (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_real_paint+0x20 (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_window_group_paint+0x19f (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
[0x3d970] (/usr/lib64/gnome-shell/libgnome-shell.so)
_g_closure_invoke_va+0xb2 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_stage_paint+0x3a (/usr/lib64/libclutter-1.0.so.0.2400.2)
meta_stage_paint+0x45 (/usr/lib64/libmutter.so.0.0.0)
_g_closure_invoke_va+0x164 (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit_valist+0xc0d (/usr/lib64/libgobject-2.0.so.0.4600.2)
g_signal_emit+0x8f (/usr/lib64/libgobject-2.0.so.0.4600.2)
clutter_actor_continue_paint+0x2bb (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_actor_paint.part.41+0x47b (/usr/lib64/libclutter-1.0.so.0.2400.2)
_clutter_stage_do_paint+0x17b (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_stage_cogl_redraw+0x496 (/usr/lib64/libclutter-1.0.so.0.2400.2)
_clutter_stage_do_update+0x117 (/usr/lib64/libclutter-1.0.so.0.2400.2)
clutter_clock_dispatch+0x169 (/usr/lib64/libclutter-1.0.so.0.2400.2)
g_main_context_dispatch+0x15a (/usr/lib64/libglib-2.0.so.0.4600.2)
g_main_context_iterate.isra.29+0x1e0 (/usr/lib64/libglib-2.0.so.0.4600.2)
g_main_loop_run+0xc2 (/usr/lib64/libglib-2.0.so.0.4600.2)
meta_run+0x2c (/usr/lib64/libmutter.so.0.0.0)
main+0x3f7 (/usr/bin/gnome-shell)
__libc_start_main+0xf0 (/usr/lib64/libc-2.22.so)
[0x2909] (/usr/bin/gnome-shell)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jncuxju9fibq2rl6olhqwjw6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 15 Apr 2016 13:20:10 +0000 (10:20 -0300)]
perf trace: Do not print interrupted syscalls when using --duration
With multiple threads, e.g. a system wide trace session, and one syscall is
midway in a thread and another thread starts another syscall we must print the
start of the interrupted syscall followed by ..., but that can't be done that
way when we use the --duration filter, as we have to wait for the syscall exit
to calculate the duration and decide if it should be filtered, so we have to
disable the interrupted logic and only print at syscall exit, duh.
Before:
# trace --duration 100
<SNIP>
9.248 (0.023 ms): gnome-shell/2287 poll(ufds: 0x7ffc5ea26580, nfds: 1, timeout_msecs:
4294967295) ...
9.296 (0.001 ms): gnome-shell/2287 recvmsg(fd: 11<socket:[35818]>, msg: 0x7ffc5ea264a0 ) ...
9.311 (0.008 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x8316a0 ) ...
9.859 (0.023 ms): gnome-shell/2287 poll(ufds: 0x7ffc5ea24250, nfds: 1, timeout_msecs:
4294967295) ...
9.942 (0.051 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x8316a0 ) ...
10.467 (0.003 ms): gnome-shell/2287 poll(ufds: 0x55e623431220, nfds: 50, timeout_msecs:
4294967295) ...
11.136 (0.382 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x8316a0 ) ...
11.223 (0.023 ms): SoftwareVsyncT/24369 futex(uaddr: 0x7f5ec5df8c14, op: WAIT_BITSET|PRIV, val: 1, utime: 0x7f5ec5df8b68, val3:
4294967295) ...
16.865 (5.501 ms): firefox/24321 poll(ufds: 0x7f5ec388b460, nfds: 6, timeout_msecs:
4294967295 ) ...
22.571 (0.006 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x8316a0 ) ...
26.793 (4.063 ms): gnome-shell/2287 poll(ufds: 0x55e623431220, nfds: 50, timeout_msecs:
4294967295) ...
26.917 (0.080 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x8316a0 ) ...
27.291 (0.355 ms): qemu-system-x8/10065 ppoll(ufds: 0x55c98b39e400, nfds: 72, tsp: 0x7fffe4e4fe60, sigsetsize: 8) ...
27.336 (0.012 ms): SoftwareVsyncT/24369 futex(uaddr: 0x7f5ec5df8c14, op: WAIT_BITSET|PRIV, val: 1, utime: 0x7f5ec5df8b68, val3:
4294967295) ...
33.370 (5.958 ms): firefox/24321 poll(ufds: 0x7f5ec388b460, nfds: 6, timeout_msecs:
4294967295) ...
33.866 (0.021 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x8316a0 ) ...
35.762 (1.611 ms): gnome-shell/2287 poll(ufds: 0x55e623431220, nfds: 50, timeout_msecs: 8 ) ...
38.765 (2.910 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x8316a0 ) ...
After:
# trace --duration 100
238.292 (153.226 ms): hexchat/2786 poll(ufds: 0x559ea372f370, nfds: 6, timeout_msecs: 153) = 0 Timeout
249.634 (199.433 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x7ffdcbb63610 ) = 1
385.583 (147.257 ms): hexchat/2786 poll(ufds: 0x559ea372f370, nfds: 6, timeout_msecs: 147) = 0 Timeout
397.166 (110.779 ms): gnome-shell/2287 poll(ufds: 0x55e623431220, nfds: 50, timeout_msecs:
4294967295) = 1
601.839 (132.066 ms): Xorg/2025 select(n: 512, inp: 0x83a8e0, tvp: 0x8316a0 ) = 1
602.445 (132.679 ms): gnome-shell/2287 poll(ufds: 0x55e623431220, nfds: 50, timeout_msecs:
4294967295) = 1
686.122 (300.418 ms): hexchat/2786 poll(ufds: 0x559ea372f370, nfds: 6, timeout_msecs: 300) = 0 Timeout
815.033 (184.641 ms): JS Helper/24352 futex(uaddr: 0x7f5ed98e584c, op: WAIT|PRIV, val:
1149859) = 0
825.868 (195.469 ms): JS Helper/24351 futex(uaddr: 0x7f5ed98e584c, op: WAIT|PRIV, val:
1149860) = 0
840.738 (210.335 ms): JS Helper/24350 futex(uaddr: 0x7f5ed98e584c, op: WAIT|PRIV, val:
1149861) = 0
914.898 (158.692 ms): Compositor/24363 futex(uaddr: 0x7f5ec8dfebf4, op: WAIT|PRIV, val: 1) = 0
915.199 (100.747 ms): Timer/24358 futex(uaddr: 0x7f5ed98e56cc, op: WAIT_BITSET|PRIV|CLKRT, val:
2545397, utime: 0x7f5ecdbfec30, val3:
4294967295) = 0
986.639 (247.325 ms): hexchat/2786 poll(ufds: 0x559ea372f370, nfds: 6, timeout_msecs: 247) = 0 Timeout
996.239 (500.591 ms): chrome/16237 poll(ufds: 0x3ecd739bd0, nfds: 5, timeout_msecs: 500) = 0 Timeout
1042.890 (120.076 ms): Timer/24358 futex(uaddr: 0x7f5ed98e56cc, op: WAIT_BITSET|PRIV|CLKRT, val:
2545403, utime: 0x7f5ecdbfec30, val3:
4294967295) = -1 ETIMEDOUT Connection timed out
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d2nay6kjax5ro991c9kelvi5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ming Lei [Fri, 15 Apr 2016 10:51:28 +0000 (18:51 +0800)]
block: loop: fix filesystem corruption in case of aio/dio
Starting from commit
e36f620428(block: split bios to max possible length),
block core starts to split bio in the middle of bvec.
Unfortunately loop dio/aio doesn't consider this situation, and
always treat 'iter.iov_offset' as zero. Then filesystem corruption
is observed.
This patch figures out the offset of the base bvevc via
'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset
to iov iterator.
Fixes:
e36f6204288088f (block: split bios to max possible length)
Cc: Keith Busch <keith.busch@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org (4.5)
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Fri, 15 Apr 2016 02:53:46 +0000 (19:53 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a binutils fix, an lguest fix, an mcelog fix and a missing
documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid using object after free in genpool
lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
x86/build: Build compressed x86 kernels as PIE
x86/mm/pkeys: Add missing Documentation
Linus Torvalds [Fri, 15 Apr 2016 02:31:34 +0000 (19:31 -0700)]
Merge branch 'mm-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull mm gup cleanup from Ingo Molnar:
"This removes the ugly get-user-pages API hack, now that all upstream
code has been migrated to it"
("ugly" is putting it mildly. But it worked.. - Linus)
* 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm/gup: Remove the macro overload API migration helpers from the get_user*() APIs
Linus Torvalds [Fri, 15 Apr 2016 02:07:45 +0000 (19:07 -0700)]
Merge tag 'dm-4.6-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- fix a 4.6-rc1 bio-based DM 'struct dm_target_io' leak in an error
path
- stable@ fix for DM cache metadata's READ_LOCK macros that were
incorrectly returning error if the block manager was in read-only
mode; also cleanup multi-statement macros to use do {} while(0)
* tag 'dm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
dm: fix dm_target_io leak if clone_bio() returns an error
Linus Torvalds [Fri, 15 Apr 2016 02:02:06 +0000 (19:02 -0700)]
Merge tag 'pwm/for-4.6-rc4' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"A single one-line fix to turn the regmap cache from an RB-tree to a
flat cache to avoid lockdep and abort issues"
* tag 'pwm/for-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: fsl-ftm: Use flat regmap cache
Linus Torvalds [Fri, 15 Apr 2016 01:47:51 +0000 (18:47 -0700)]
Merge tag 'sound-4.6-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We've had a very calm development cycle, so far. Here are the few
fixes for HD-audio and USB-audio, all of which are small and easy"
* tag 'sound-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix inconsistent monitor_present state until repoll
ALSA: hda - Fix regression of monitor_present flag in eld proc file
ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
ALSA: sscape: Use correct format identifier for size_t
ALSA: usb-audio: Add a quirk for Plantronics BT300
ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
ALSA: hda - Bind with i915 only when Intel graphics is present
Linus Torvalds [Fri, 15 Apr 2016 01:40:47 +0000 (18:40 -0700)]
Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox fixes from Jussi Brar:
"Misc fixes:
mailbox-test driver:
- prevent memory leak and another cosmetic change
mailbox:
- change the returned error code
Xgene driver:
- return -ENOMEM instead of PTR_ERR for failed devm_kzalloc"
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: Stop using ENOSYS for anything other than unimplemented syscalls
mailbox: mailbox-test: Prevent memory leak
mailbox: mailbox-test: Use more consistent format for calling copy_from_user()
mailbox: xgene-slimpro: Fix wrong test for devm_kzalloc
Linus Torvalds [Fri, 15 Apr 2016 01:22:42 +0000 (18:22 -0700)]
Merge tag 'for-linus-4.6-rc4' of git://git./linux/kernel/git/jaegeuk/f2fs
Pull f2fs/fscrypto fixes from Jaegeuk Kim:
"In addition to f2fs/fscrypto fixes, I've added one patch which
prevents RCU mode lookup in d_revalidate, as Al mentioned.
These patches fix f2fs and fscrypto based on -rc3 bug fixes in ext4
crypto, which have not yet been fully propagated as follows.
- use of dget_parent and file_dentry to avoid crashes
- disallow RCU-mode lookup in d_invalidate
- disallow -ENOMEM in the core data encryption path"
* tag 'for-linus-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
ext4/fscrypto: avoid RCU lookup in d_revalidate
fscrypto: don't let data integrity writebacks fail with ENOMEM
f2fs: use dget_parent and file_dentry in f2fs_file_open
fscrypto: use dget_parent() in fscrypt_d_revalidate()
Linus Torvalds [Fri, 15 Apr 2016 01:15:40 +0000 (18:15 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes an NFS regression caused by the skcipher/hash conversion in
sunrpc. It also fixes a build problem in certain configurations with
bcm63xx"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: bcm63xx - fix device tree compilation
sunrpc: Fix skcipher/shash conversion
Linus Torvalds [Fri, 15 Apr 2016 01:03:29 +0000 (18:03 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security
Pull keys bugfixes from James Morris:
"Two bugfixes for Keys related code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ASN.1: fix open failure check on headername
assoc_array: don't call compare_object() on a node
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 22:45:01 +0000 (19:45 -0300)]
perf evsel: Move fprintf methods to separate source file
They still use functions that would drag more stuff to the python
binding, where these fprintf methods are not used, so separate it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xfp0mgq3hh3px61di6ixi1jk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 21:29:08 +0000 (18:29 -0300)]
perf trace: Add --max-stack knob
Similar to the one in the other tools (report, script, top).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lh7kk5a5t3erwxw31ah0cgar@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 21:15:18 +0000 (18:15 -0300)]
perf script: Add --max-stack knob
Works just like with 'perf report'. In some cases we may want to have
more than 127 entries, the default maximum.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mqkz2p5ok2978gztb0vsnocc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 20:53:49 +0000 (17:53 -0300)]
perf tools: Remove addr_location argument to sample__fprintf_callchain
Not used at all, nuke it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jf2w8ce8nl3wso3vuodg5jci@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 20:45:51 +0000 (17:45 -0300)]
perf evsel: Require that callchains be resolved before calling fprintf_{sym,callchain}
This way the print routine merely does printing, not requiring access to
the resolving machinery, which helps disentangling the object files and
easing creating subsets with a limited functionality set.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2ti2jbra8fypdfawwwm3aee3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 18:54:36 +0000 (15:54 -0300)]
perf symbols: Move fprintf routines to separate object file
To disentangle symbol printing from all the code related to symbol
tables, resolution of addresses to symbols, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eik9g3hbtdc7ddv57f1d4v3p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mike Snitzer [Tue, 12 Apr 2016 16:14:46 +0000 (12:14 -0400)]
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
The READ_LOCK macro was incorrectly returning -EINVAL if
dm_bm_is_read_only() was true -- it will always be true once the cache
metadata transitions to read-only by dm_cache_metadata_set_read_only().
Wrap READ_LOCK and WRITE_LOCK multi-statement macros in do {} while(0).
Also, all accesses of the 'cmd' argument passed to these related macros
are now encapsulated in parenthesis.
A follow-up patch can be developed to eliminate the use of macros in
favor of pure C code. Avoiding that now given that this needs to apply
to stable@.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes:
d14fcf3dd79 ("dm cache: make sure every metadata function checks fail_io")
Cc: stable@vger.kernel.org
Keith Busch [Fri, 8 Apr 2016 22:09:10 +0000 (16:09 -0600)]
NVMe: Always use MSI/MSI-x interrupts
Multiple users have reported device initialization failure due the driver
not receiving legacy PCI interrupts. This is not unique to any particular
controller, but has been observed on multiple platforms.
There have been no issues reported or observed when with message signaled
interrupts, so this patch attempts to use MSI-x during initialization,
falling back to MSI. If that fails, legacy would become the default.
The setup_io_queues error handling had to change as a result: the admin
queue's msix_entry used to be initialized to the legacy IRQ. The case
where nr_io_queues is 0 would fail request_irq when setting up the admin
queue's interrupt since re-enabling MSI-x fails with 0 vectors, leaving
the admin queue's msix_entry invalid. Instead, return success immediately.
Reported-by: Tim Muhlemmer <muhlemmer@gmail.com>
Reported-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Thu, 14 Apr 2016 19:05:37 +0000 (12:05 -0700)]
/proc/iomem: only expose physical resource addresses to privileged users
In commit
c4004b02f8e5b ("x86: remove the kernel code/data/bss resources
from /proc/iomem") I was hoping to remove the phyiscal kernel address
data from /proc/iomem entirely, but that had to be reverted because some
system programs actually use it.
This limits all the detailed resource information to properly
credentialed users instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Apr 2016 19:00:21 +0000 (12:00 -0700)]
pci-sysfs: use proper file capability helper function
The PCI config access checked the file capabilities correctly, but used
the itnernal security capability check rather than the helper function
that is actually meant for that.
The security_capable() has unusual return values and is not meant to be
used elsewhere (the only other use is in the capability checking
functions that we actually intend people to use, and this odd PCI usage
really stood out when looking around the capability code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Apr 2016 18:22:00 +0000 (11:22 -0700)]
Make file credentials available to the seqfile interfaces
A lot of seqfile users seem to be using things like %pK that uses the
credentials of the current process, but that is actually completely
wrong for filesystem interfaces.
The unix semantics for permission checking files is to check permissions
at _open_ time, not at read or write time, and that is not just a small
detail: passing off stdin/stdout/stderr to a suid application and making
the actual IO happen in privileged context is a classic exploit
technique.
So if we want to be able to look at permissions at read time, we need to
use the file open credentials, not the current ones. Normal file
accesses can just use "f_cred" (or any of the helper functions that do
that, like file_ns_capable()), but the seqfile interfaces do not have
any such options.
It turns out that seq_file _does_ save away the user_ns information of
the file, though. Since user_ns is just part of the full credential
information, replace that special case with saving off the cred pointer
instead, and suddenly seq_file has all the permission information it
needs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Apr 2016 18:18:57 +0000 (11:18 -0700)]
Revert "x86: remove the kernel code/data/bss resources from /proc/iomem"
This reverts commit
c4004b02f8e5b9ce357a0bb1641756cc86962664.
Sadly, my hope that nobody would actually use the special kernel entries
in /proc/iomem were dashed by kexec. Which reads /proc/iomem explicitly
to find the kernel base address. Nasty.
Anyway, that means we can't do the sane and simple thing and just remove
the entries, and we'll instead have to mask them out based on permissions.
Reported-by: Zhengyu Zhang <zhezhang@redhat.com>
Reported-by: Dave Young <dyoung@redhat.com>
Reported-by: Freeman Zhang <freeman.zhang1992@gmail.com>
Reported-by: Emrah Demir <ed@abdsec.com>
Reported-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 17:56:06 +0000 (14:56 -0300)]
perf evsel: Remove symbol_conf usage
# perf test -v python
16: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 672
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol:
symbol_conf
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
#
To fix it just pass a parameter to perf_evsel__fprintf_sym telling if
callchains should be printed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-comrsr20bsnr8bg0n6rfwv12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 17:48:07 +0000 (14:48 -0300)]
perf callchain: Start moving away from global per thread cursors
The recent perf_evsel__fprintf_callchain() move to evsel.c added several
new symbol requirements to the python binding, for instance:
# perf test -v python
16: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 18030
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol:
callchain_cursor
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
#
This would require linking against callchain.c to access to the global
callchain_cursor variables.
Since lots of functions already receive as a parameter a
callchain_cursor struct pointer, make that be the case for some more
function so that we can start phasing out usage of yet another global
variable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-djko3097eyg2rn66v2qcqfvn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Apr 2016 16:53:10 +0000 (13:53 -0300)]
perf trace: Move socket_type beautifier to tools/perf/trace/beauty/
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ao91htwxdqwlwxr47gbluou1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Helge Deller [Wed, 13 Apr 2016 20:27:22 +0000 (22:27 +0200)]
parisc: Fix ftrace function tracer
Fix the FTRACE function tracer for 32- and 64-bit kernel.
The former code was horribly broken.
Reimplement most coding in assembly and utilize optimizations, e.g. put
mcount() and ftrace_stub() into one L1 cacheline.
Signed-off-by: Helge Deller <deller@gmx.de>
Toshi Kani [Wed, 13 Apr 2016 00:10:52 +0000 (18:10 -0600)]
pmem: fix BUG() error in pmem.h:48 on X86_32
After 'commit
fc0c2028135c ("x86, pmem: use memcpy_mcsafe()
for memcpy_from_pmem()")', probing a PMEM device hits the BUG()
error below on X86_32 kernel.
kernel BUG at include/linux/pmem.h:48!
memcpy_from_pmem() calls arch_memcpy_from_pmem(), which is
unimplemented since CONFIG_ARCH_HAS_PMEM_API is undefined on
X86_32.
Fix the BUG() error by adding default_memcpy_from_pmem().
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Stefan Agner [Thu, 21 Jan 2016 02:56:22 +0000 (18:56 -0800)]
pwm: fsl-ftm: Use flat regmap cache
Use flat regmap cache to avoid lockdep warning at probe:
[ 0.697285] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x15c/0x160()
[ 0.697449] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
The RB-tree regmap cache needs to allocate new space on first writes.
However, allocations in an atomic context (e.g. when a spinlock is held)
are not allowed. The function regmap_write calls map->lock, which
acquires a spinlock in the fast_io case. Since the pwm-fsl-ftm driver
uses MMIO, the regmap bus of type regmap_mmio is being used which has
fast_io set to true.
The MMIO space of the pwm-fsl-ftm driver is reasonable condense, hence
using the much faster flat regmap cache is anyway the better choice.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Ingo Molnar [Thu, 14 Apr 2016 13:30:59 +0000 (15:30 +0200)]
Merge tag 'perf-core-for-mingo-
20160414' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Introduce 'perf record --timestamp-filename', to add a timestamp
at the end of the 'perf data' file. Will get added value when
the patch to make 'perf.data' file snapshots gets merged (Wang Nan)
- Fix display of variables present in both --config and --user in
'perf list' (Taeung Song)
Build fixes:
- Add seccomp and getradom beautifier related defines to fix
the build in older systems where those definitions are not
available (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Taeung Song [Thu, 14 Apr 2016 07:53:19 +0000 (16:53 +0900)]
perf config: Make show_config() use perf_config_set
Currently show_config() has a problem when user and system config files
have the same config variables i.e.:
# cat ~/.perfconfig
[top]
children = false
When $(sysconfdir) is /usr/local/etc
# cat /usr/local/etc/perfconfig
[top]
children = true
Before:
# perf config --user --list
top.children=false
# perf config --system --list
top.children=true
# perf config --list
top.children=true
top.children=false
Because perf_config() can call show_config() each the config file (user
and system). Fix it.
After:
# perf config --user --list
top.children=false
# perf config --system --list
top.children=true
# perf config --list
top.children=false
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1460620401-23430-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Taeung Song [Thu, 14 Apr 2016 07:53:18 +0000 (16:53 +0900)]
perf config: Introduce perf_config_set class
This infrastructure code was designed for upcoming features of
'perf config'.
That collect config key-value pairs from user and system config files
(i.e. user wide ~/.perfconfig and system wide $(sysconfdir)/perfconfig)
to manage perf's configs.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1460620401-23430-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Wed, 13 Apr 2016 08:21:07 +0000 (08:21 +0000)]
perf record: Add '--timestamp-filename' option to append timestamp to output file name
This option appends current timestamp to the output file name.
For example:
# perf record -a --timestamp-filename
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Dump perf.data.
2015122622265847 ]
[ perf record: Captured and wrote 0.742 MB perf.data.<timestamp> (90 samples) ]
# ls
perf.data.
201512262226584
The timestamp will be useful for identifying each perf.data after the
'perf record' support for generating multiple output files gets
introduced.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460535673-159866-5-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Wed, 13 Apr 2016 08:21:06 +0000 (08:21 +0000)]
perf record: Turns auxtrace_snapshot_enable into 3 states
auxtrace_snapshot_enable has only two states (0/1). Turns it into a
triple states enum so SIGUSR2 handler can safely do other works without
triggering auxtrace snapshot.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460535673-159866-4-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Wed, 13 Apr 2016 08:21:05 +0000 (08:21 +0000)]
perf data: Add perf_data_file__switch() helper
perf_data_file__switch() closes current output file, renames it, then
open a new one to continue recording. It will be used by 'perf record'
to split output into multiple perf.data files.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460535673-159866-3-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / cascardo / linux.git / log