From cb84f6c0a25eb76b1f838eb63e212705c0c06b5f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 11 May 2016 13:23:13 +0800 Subject: [PATCH] ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator This is the same issue fixed in commit dcf5341f0150 ("ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator"). Commit message copied: dc1sw is an on/off only regulator and as such it cannot have constraints. This is a limitation of the kernel regulator implementation which resolves supplies on the first regulator_get(), which is done after applying constraints, and applying the constrains will fail because it calls _regulator_get_voltage() and _regulator_do_set_voltage() both of which will fail on a switch regulator when there is no supply (yet). This causes registering of all axp22x regulators to fail with the following errors: [ 1.395249] vcc-lcd: failed to get the current voltage(-22) [ 1.405131] axp20x-regulator axp20x-regulator: Failed to register dc1sw [ 1.412436] axp20x-regulator: probe of axp20x-regulator failed with error -22 This commit removes the constrains on dc1sw / vcc-lcd fixing this problem. Note that dcdc1 itself is contrained to the exact same values, so this does not change anything. Cc: Hans de Goede Signed-off-by: Chen-Yu Tsai Cc: # 4.6 Acked-by: Maxime Ripard Signed-off-by: Olof Johansson --- arch/arm/boot/dts/sun6i-a31s-primo81.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 68b479b8772c..73c133f5e79c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -176,8 +176,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; -- 2.20.1