Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

   1 * Renesas R-Car (RZ/G) DMA Controller Device Tree bindings
   2
   3 Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA
   4 controller instances named DMAC capable of serving multiple clients. Channels
   5 can be dedicated to specific clients or shared between a large number of
   6 clients.
   7
   8 Each DMA client is connected to one dedicated port of the DMAC, identified by
   9 an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
  10 256 clients in total. When the number of hardware channels is lower than the
  11 number of clients to be served, channels must be shared between multiple DMA
  12 clients. The association of DMA clients to DMAC channels is fully dynamic and
  13 not described in these device tree bindings.
  14
  15 Required Properties:
  16
  17 - compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback.
  18               Examples with soctypes are:
  19                 - "renesas,dmac-r8a7743" (RZ/G1M)
  20                 - "renesas,dmac-r8a7745" (RZ/G1E)
  21                 - "renesas,dmac-r8a7790" (R-Car H2)
  22                 - "renesas,dmac-r8a7791" (R-Car M2-W)
  23                 - "renesas,dmac-r8a7792" (R-Car V2H)
  24                 - "renesas,dmac-r8a7793" (R-Car M2-N)
  25                 - "renesas,dmac-r8a7794" (R-Car E2)
  26                 - "renesas,dmac-r8a7795" (R-Car H3)
  27
  28 - reg: base address and length of the registers block for the DMAC
  29
  30 - interrupts: interrupt specifiers for the DMAC, one for each entry in
  31   interrupt-names.
  32 - interrupt-names: one entry per channel, named "ch%u", where %u is the
  33   channel number ranging from zero to the number of channels minus one.
  34
  35 - clock-names: "fck" for the functional clock
  36 - clocks: a list of phandle + clock-specifier pairs, one for each entry
  37   in clock-names.
  38 - clock-names: must contain "fck" for the functional clock.
  39
  40 - #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
  41   connected to the DMA client
  42 - dma-channels: number of DMA channels
  43
  44 Example: R8A7790 (R-Car H2) SYS-DMACs
  45
  46         dmac0: dma-controller@e6700000 {
  47                 compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
  48                 reg = <0 0xe6700000 0 0x20000>;
  49                 interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
  50                               0 200 IRQ_TYPE_LEVEL_HIGH
  51                               0 201 IRQ_TYPE_LEVEL_HIGH
  52                               0 202 IRQ_TYPE_LEVEL_HIGH
  53                               0 203 IRQ_TYPE_LEVEL_HIGH
  54                               0 204 IRQ_TYPE_LEVEL_HIGH
  55                               0 205 IRQ_TYPE_LEVEL_HIGH
  56                               0 206 IRQ_TYPE_LEVEL_HIGH
  57                               0 207 IRQ_TYPE_LEVEL_HIGH
  58                               0 208 IRQ_TYPE_LEVEL_HIGH
  59                               0 209 IRQ_TYPE_LEVEL_HIGH
  60                               0 210 IRQ_TYPE_LEVEL_HIGH
  61                               0 211 IRQ_TYPE_LEVEL_HIGH
  62                               0 212 IRQ_TYPE_LEVEL_HIGH
  63                               0 213 IRQ_TYPE_LEVEL_HIGH
  64                               0 214 IRQ_TYPE_LEVEL_HIGH>;
  65                 interrupt-names = "error",
  66                                 "ch0", "ch1", "ch2", "ch3",
  67                                 "ch4", "ch5", "ch6", "ch7",
  68                                 "ch8", "ch9", "ch10", "ch11",
  69                                 "ch12", "ch13", "ch14";
  70                 clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
  71                 clock-names = "fck";
  72                 #dma-cells = <1>;
  73                 dma-channels = <15>;
  74         };
  75
  76         dmac1: dma-controller@e6720000 {
  77                 compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
  78                 reg = <0 0xe6720000 0 0x20000>;
  79                 interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
  80                               0 216 IRQ_TYPE_LEVEL_HIGH
  81                               0 217 IRQ_TYPE_LEVEL_HIGH
  82                               0 218 IRQ_TYPE_LEVEL_HIGH
  83                               0 219 IRQ_TYPE_LEVEL_HIGH
  84                               0 308 IRQ_TYPE_LEVEL_HIGH
  85                               0 309 IRQ_TYPE_LEVEL_HIGH
  86                               0 310 IRQ_TYPE_LEVEL_HIGH
  87                               0 311 IRQ_TYPE_LEVEL_HIGH
  88                               0 312 IRQ_TYPE_LEVEL_HIGH
  89                               0 313 IRQ_TYPE_LEVEL_HIGH
  90                               0 314 IRQ_TYPE_LEVEL_HIGH
  91                               0 315 IRQ_TYPE_LEVEL_HIGH
  92                               0 316 IRQ_TYPE_LEVEL_HIGH
  93                               0 317 IRQ_TYPE_LEVEL_HIGH
  94                               0 318 IRQ_TYPE_LEVEL_HIGH>;
  95                 interrupt-names = "error",
  96                                 "ch0", "ch1", "ch2", "ch3",
  97                                 "ch4", "ch5", "ch6", "ch7",
  98                                 "ch8", "ch9", "ch10", "ch11",
  99                                 "ch12", "ch13", "ch14";
 100                 clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
 101                 clock-names = "fck";
 102                 #dma-cells = <1>;
 103                 dma-channels = <15>;
 104         };