1 * MELFAS MIP4 Touchscreen
4 - compatible: must be "melfas,mip4_ts"
5 - reg: I2C slave address of the chip (0x48 or 0x34)
6 - interrupt-parent: interrupt controller to which the chip is connected
7 - interrupts: interrupt to which the chip is connected
10 - ce-gpios: GPIO connected to the CE (chip enable) pin of the chip
14 touchscreen: melfas_mip4@48 {
15 compatible = "melfas,mip4_ts";
17 interrupt-parent = <&gpio>;
18 interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
19 ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;