Documentation/devicetree/bindings/net/stm32-dwmac.txt

   1 STMicroelectronics STM32 / MCU DWMAC glue layer controller
   2
   3 This file documents platform glue layer for stmmac.
   4 Please see stmmac.txt for the other unchanged properties.
   5
   6 The device node has following properties.
   7
   8 Required properties:
   9 - compatible:  Should be "st,stm32-dwmac" to select glue, and
  10                "snps,dwmac-3.50a" to select IP version.
  11 - clocks: Must contain a phandle for each entry in clock-names.
  12 - clock-names: Should be "stmmaceth" for the host clock.
  13                Should be "mac-clk-tx" for the MAC TX clock.
  14                Should be "mac-clk-rx" for the MAC RX clock.
  15 - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
  16               encompases the glue register, and the offset of the control register.
  17 Example:
  18
  19         ethernet@40028000 {
  20                 compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
  21                 status = "disabled";
  22                 reg = <0x40028000 0x8000>;
  23                 reg-names = "stmmaceth";
  24                 interrupts = <0 61 0>, <0 62 0>;
  25                 interrupt-names = "macirq", "eth_wake_irq";
  26                 clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
  27                 clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
  28                 st,syscon = <&syscfg 0x4>;
  29                 snps,pbl = <8>;
  30                 snps,mixed-burst;
  31                 dma-ranges;
  32         };