arch/arm/boot/dts/am335x-evm.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "am33xx.dtsi"
  11 #include <dt-bindings/interrupt-controller/irq.h>
  12
  13 / {
  14         model = "TI AM335x EVM";
  15         compatible = "ti,am335x-evm", "ti,am33xx";
  16
  17         cpus {
  18                 cpu@0 {
  19                         cpu0-supply = <&vdd1_reg>;
  20                 };
  21         };
  22
  23         memory@80000000 {
  24                 device_type = "memory";
  25                 reg = <0x80000000 0x10000000>; /* 256 MB */
  26         };
  27
  28         vbat: fixedregulator0 {
  29                 compatible = "regulator-fixed";
  30                 regulator-name = "vbat";
  31                 regulator-min-microvolt = <5000000>;
  32                 regulator-max-microvolt = <5000000>;
  33                 regulator-boot-on;
  34         };
  35
  36         lis3_reg: fixedregulator1 {
  37                 compatible = "regulator-fixed";
  38                 regulator-name = "lis3_reg";
  39                 regulator-boot-on;
  40         };
  41
  42         wlan_en_reg: fixedregulator2 {
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "wlan-en-regulator";
  45                 regulator-min-microvolt = <1800000>;
  46                 regulator-max-microvolt = <1800000>;
  47
  48                 /* WLAN_EN GPIO for this board - Bank1, pin16 */
  49                 gpio = <&gpio1 16 0>;
  50
  51                 /* WLAN card specific delay */
  52                 startup-delay-us = <70000>;
  53                 enable-active-high;
  54         };
  55
  56         matrix_keypad: matrix_keypad0 {
  57                 compatible = "gpio-matrix-keypad";
  58                 debounce-delay-ms = <5>;
  59                 col-scan-delay-us = <2>;
  60
  61                 row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH         /* Bank1, pin25 */
  62                              &gpio1 26 GPIO_ACTIVE_HIGH         /* Bank1, pin26 */
  63                              &gpio1 27 GPIO_ACTIVE_HIGH>;       /* Bank1, pin27 */
  64
  65                 col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH         /* Bank1, pin21 */
  66                              &gpio1 22 GPIO_ACTIVE_HIGH>;       /* Bank1, pin22 */
  67
  68                 linux,keymap = <0x0000008b      /* MENU */
  69                                 0x0100009e      /* BACK */
  70                                 0x02000069      /* LEFT */
  71                                 0x0001006a      /* RIGHT */
  72                                 0x0101001c      /* ENTER */
  73                                 0x0201006c>;    /* DOWN */
  74         };
  75
  76         gpio_keys: volume_keys0 {
  77                 compatible = "gpio-keys";
  78                 #address-cells = <1>;
  79                 #size-cells = <0>;
  80                 autorepeat;
  81
  82                 switch9 {
  83                         label = "volume-up";
  84                         linux,code = <115>;
  85                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  86                         wakeup-source;
  87                 };
  88
  89                 switch10 {
  90                         label = "volume-down";
  91                         linux,code = <114>;
  92                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  93                         wakeup-source;
  94                 };
  95         };
  96
  97         backlight {
  98                 compatible = "pwm-backlight";
  99                 pwms = <&ecap0 0 50000 0>;
 100                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
 101                 default-brightness-level = <8>;
 102         };
 103
 104         panel {
 105                 compatible = "ti,tilcdc,panel";
 106                 status = "okay";
 107                 pinctrl-names = "default";
 108                 pinctrl-0 = <&lcd_pins_s0>;
 109                 panel-info {
 110                         ac-bias           = <255>;
 111                         ac-bias-intrpt    = <0>;
 112                         dma-burst-sz      = <16>;
 113                         bpp               = <32>;
 114                         fdd               = <0x80>;
 115                         sync-edge         = <0>;
 116                         sync-ctrl         = <1>;
 117                         raster-order      = <0>;
 118                         fifo-th           = <0>;
 119                 };
 120
 121                 display-timings {
 122                         800x480p62 {
 123                                 clock-frequency = <30000000>;
 124                                 hactive = <800>;
 125                                 vactive = <480>;
 126                                 hfront-porch = <39>;
 127                                 hback-porch = <39>;
 128                                 hsync-len = <47>;
 129                                 vback-porch = <29>;
 130                                 vfront-porch = <13>;
 131                                 vsync-len = <2>;
 132                                 hsync-active = <1>;
 133                                 vsync-active = <1>;
 134                         };
 135                 };
 136         };
 137
 138         sound {
 139                 compatible = "simple-audio-card";
 140                 simple-audio-card,name = "AM335x-EVM";
 141                 simple-audio-card,widgets =
 142                         "Headphone", "Headphone Jack",
 143                         "Line", "Line In";
 144                 simple-audio-card,routing =
 145                         "Headphone Jack",       "HPLOUT",
 146                         "Headphone Jack",       "HPROUT",
 147                         "LINE1L",               "Line In",
 148                         "LINE1R",               "Line In";
 149                 simple-audio-card,format = "dsp_b";
 150                 simple-audio-card,bitclock-master = <&sound_master>;
 151                 simple-audio-card,frame-master = <&sound_master>;
 152                 simple-audio-card,bitclock-inversion;
 153
 154                 simple-audio-card,cpu {
 155                         sound-dai = <&mcasp1>;
 156                 };
 157
 158                 sound_master: simple-audio-card,codec {
 159                         sound-dai = <&tlv320aic3106>;
 160                         system-clock-frequency = <12000000>;
 161                 };
 162         };
 163 };
 164
 165 &am33xx_pinmux {
 166         pinctrl-names = "default";
 167         pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
 168
 169         matrix_keypad_s0: matrix_keypad_s0 {
 170                 pinctrl-single,pins = <
 171                         AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_a5.gpio1_21 */
 172                         AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_a6.gpio1_22 */
 173                         AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_a9.gpio1_25 */
 174                         AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_a10.gpio1_26 */
 175                         AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_a11.gpio1_27 */
 176                 >;
 177         };
 178
 179         volume_keys_s0: volume_keys_s0 {
 180                 pinctrl-single,pins = <
 181                         AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* spi0_sclk.gpio0_2 */
 182                         AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* spi0_d0.gpio0_3 */
 183                 >;
 184         };
 185
 186         i2c0_pins: pinmux_i2c0_pins {
 187                 pinctrl-single,pins = <
 188                         AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)       /* i2c0_sda.i2c0_sda */
 189                         AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)       /* i2c0_scl.i2c0_scl */
 190                 >;
 191         };
 192
 193         i2c1_pins: pinmux_i2c1_pins {
 194                 pinctrl-single,pins = <
 195                         AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2)       /* spi0_d1.i2c1_sda */
 196                         AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2)       /* spi0_cs0.i2c1_scl */
 197                 >;
 198         };
 199
 200         uart0_pins: pinmux_uart0_pins {
 201                 pinctrl-single,pins = <
 202                         AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart0_rxd.uart0_rxd */
 203                         AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart0_txd.uart0_txd */
 204                 >;
 205         };
 206
 207         uart1_pins: pinmux_uart1_pins {
 208                 pinctrl-single,pins = <
 209                         AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)              /* uart1_ctsn.uart1_ctsn */
 210                         AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart1_rtsn.uart1_rtsn */
 211                         AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart1_rxd.uart1_rxd */
 212                         AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* uart1_txd.uart1_txd */
 213                 >;
 214         };
 215
 216         clkout2_pin: pinmux_clkout2_pin {
 217                 pinctrl-single,pins = <
 218                         AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)    /* xdma_event_intr1.clkout2 */
 219                 >;
 220         };
 221
 222         nandflash_pins_s0: nandflash_pins_s0 {
 223                 pinctrl-single,pins = <
 224                         AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad0.gpmc_ad0 */
 225                         AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad1.gpmc_ad1 */
 226                         AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad2.gpmc_ad2 */
 227                         AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad3.gpmc_ad3 */
 228                         AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad4.gpmc_ad4 */
 229                         AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad5.gpmc_ad5 */
 230                         AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad6.gpmc_ad6 */
 231                         AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_ad7.gpmc_ad7 */
 232                         AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_wait0.gpmc_wait0 */
 233                         AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)       /* gpmc_wpn.gpio0_30 */
 234                         AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_csn0.gpmc_csn0  */
 235                         AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)             /* gpmc_advn_ale.gpmc_advn_ale */
 236                         AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)             /* gpmc_oen_ren.gpmc_oen_ren */
 237                         AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)             /* gpmc_wen.gpmc_wen */
 238                         AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_be0n_cle.gpmc_be0n_cle */
 239                 >;
 240         };
 241
 242         ecap0_pins: backlight_pins {
 243                 pinctrl-single,pins = <
 244                         AM33XX_IOPAD(0x964, MUX_MODE0)  /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 245                 >;
 246         };
 247
 248         cpsw_default: cpsw_default {
 249                 pinctrl-single,pins = <
 250                         /* Slave 1 */
 251                         AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txen.rgmii1_tctl */
 252                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxdv.rgmii1_rctl */
 253                         AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd3.rgmii1_td3 */
 254                         AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd2.rgmii1_td2 */
 255                         AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd1.rgmii1_td1 */
 256                         AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd0.rgmii1_td0 */
 257                         AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txclk.rgmii1_tclk */
 258                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxclk.rgmii1_rclk */
 259                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd3.rgmii1_rd3 */
 260                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd2.rgmii1_rd2 */
 261                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd1.rgmii1_rd1 */
 262                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd0.rgmii1_rd0 */
 263                 >;
 264         };
 265
 266         cpsw_sleep: cpsw_sleep {
 267                 pinctrl-single,pins = <
 268                         /* Slave 1 reset value */
 269                         AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 270                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 271                         AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 272                         AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
 273                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 274                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 275                         AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 276                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
 277                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 278                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
 279                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 280                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 281                 >;
 282         };
 283
 284         davinci_mdio_default: davinci_mdio_default {
 285                 pinctrl-single,pins = <
 286                         /* MDIO */
 287                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* mdio_data.mdio_data */
 288                         AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)                      /* mdio_clk.mdio_clk */
 289                 >;
 290         };
 291
 292         davinci_mdio_sleep: davinci_mdio_sleep {
 293                 pinctrl-single,pins = <
 294                         /* MDIO reset value */
 295                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 296                         AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 297                 >;
 298         };
 299
 300         mmc1_pins: pinmux_mmc1_pins {
 301                 pinctrl-single,pins = <
 302                         AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 303                 >;
 304         };
 305
 306         mmc3_pins: pinmux_mmc3_pins {
 307                 pinctrl-single,pins = <
 308                         AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)       /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
 309                         AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)       /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
 310                         AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)       /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
 311                         AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)       /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
 312                         AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)       /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
 313                         AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)       /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
 314                 >;
 315         };
 316
 317         wlan_pins: pinmux_wlan_pins {
 318                 pinctrl-single,pins = <
 319                         AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* gpmc_a0.gpio1_16 */
 320                         AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7)              /* mcasp0_ahclkr.gpio3_17 */
 321                         AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7)    /* mcasp0_ahclkx.gpio3_21 */
 322                 >;
 323         };
 324
 325         lcd_pins_s0: lcd_pins_s0 {
 326                 pinctrl-single,pins = <
 327                         AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)             /* gpmc_ad8.lcd_data23 */
 328                         AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)             /* gpmc_ad9.lcd_data22 */
 329                         AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)             /* gpmc_ad10.lcd_data21 */
 330                         AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)             /* gpmc_ad11.lcd_data20 */
 331                         AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)             /* gpmc_ad12.lcd_data19 */
 332                         AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)             /* gpmc_ad13.lcd_data18 */
 333                         AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)             /* gpmc_ad14.lcd_data17 */
 334                         AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)             /* gpmc_ad15.lcd_data16 */
 335                         AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)             /* lcd_data0.lcd_data0 */
 336                         AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)             /* lcd_data1.lcd_data1 */
 337                         AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)             /* lcd_data2.lcd_data2 */
 338                         AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)             /* lcd_data3.lcd_data3 */
 339                         AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)             /* lcd_data4.lcd_data4 */
 340                         AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)             /* lcd_data5.lcd_data5 */
 341                         AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)             /* lcd_data6.lcd_data6 */
 342                         AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)             /* lcd_data7.lcd_data7 */
 343                         AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)             /* lcd_data8.lcd_data8 */
 344                         AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)             /* lcd_data9.lcd_data9 */
 345                         AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)             /* lcd_data10.lcd_data10 */
 346                         AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)             /* lcd_data11.lcd_data11 */
 347                         AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)             /* lcd_data12.lcd_data12 */
 348                         AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)             /* lcd_data13.lcd_data13 */
 349                         AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)             /* lcd_data14.lcd_data14 */
 350                         AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)             /* lcd_data15.lcd_data15 */
 351                         AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)             /* lcd_vsync.lcd_vsync */
 352                         AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)             /* lcd_hsync.lcd_hsync */
 353                         AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)             /* lcd_pclk.lcd_pclk */
 354                         AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)             /* lcd_ac_bias_en.lcd_ac_bias_en */
 355                 >;
 356         };
 357
 358         mcasp1_pins: mcasp1_pins {
 359                 pinctrl-single,pins = <
 360                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 361                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 362                         AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 363                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 364                 >;
 365         };
 366
 367         mcasp1_pins_sleep: mcasp1_pins_sleep {
 368                 pinctrl-single,pins = <
 369                         AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 370                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 371                         AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
 372                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 373                 >;
 374         };
 375
 376         dcan1_pins_default: dcan1_pins_default {
 377                 pinctrl-single,pins = <
 378                         AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
 379                         AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
 380                 >;
 381         };
 382 };
 383
 384 &uart0 {
 385         pinctrl-names = "default";
 386         pinctrl-0 = <&uart0_pins>;
 387
 388         status = "okay";
 389 };
 390
 391 &uart1 {
 392         pinctrl-names = "default";
 393         pinctrl-0 = <&uart1_pins>;
 394
 395         status = "okay";
 396 };
 397
 398 &i2c0 {
 399         pinctrl-names = "default";
 400         pinctrl-0 = <&i2c0_pins>;
 401
 402         status = "okay";
 403         clock-frequency = <400000>;
 404
 405         tps: tps@2d {
 406                 reg = <0x2d>;
 407         };
 408 };
 409
 410 &usb {
 411         status = "okay";
 412 };
 413
 414 &usb_ctrl_mod {
 415         status = "okay";
 416 };
 417
 418 &usb0_phy {
 419         status = "okay";
 420 };
 421
 422 &usb1_phy {
 423         status = "okay";
 424 };
 425
 426 &usb0 {
 427         status = "okay";
 428 };
 429
 430 &usb1 {
 431         status = "okay";
 432         dr_mode = "host";
 433 };
 434
 435 &cppi41dma  {
 436         status = "okay";
 437 };
 438
 439 &i2c1 {
 440         pinctrl-names = "default";
 441         pinctrl-0 = <&i2c1_pins>;
 442
 443         status = "okay";
 444         clock-frequency = <100000>;
 445
 446         lis331dlh: lis331dlh@18 {
 447                 compatible = "st,lis331dlh", "st,lis3lv02d";
 448                 reg = <0x18>;
 449                 Vdd-supply = <&lis3_reg>;
 450                 Vdd_IO-supply = <&lis3_reg>;
 451
 452                 st,click-single-x;
 453                 st,click-single-y;
 454                 st,click-single-z;
 455                 st,click-thresh-x = <10>;
 456                 st,click-thresh-y = <10>;
 457                 st,click-thresh-z = <10>;
 458                 st,irq1-click;
 459                 st,irq2-click;
 460                 st,wakeup-x-lo;
 461                 st,wakeup-x-hi;
 462                 st,wakeup-y-lo;
 463                 st,wakeup-y-hi;
 464                 st,wakeup-z-lo;
 465                 st,wakeup-z-hi;
 466                 st,min-limit-x = <120>;
 467                 st,min-limit-y = <120>;
 468                 st,min-limit-z = <140>;
 469                 st,max-limit-x = <550>;
 470                 st,max-limit-y = <550>;
 471                 st,max-limit-z = <750>;
 472         };
 473
 474         tsl2550: tsl2550@39 {
 475                 compatible = "taos,tsl2550";
 476                 reg = <0x39>;
 477         };
 478
 479         tmp275: tmp275@48 {
 480                 compatible = "ti,tmp275";
 481                 reg = <0x48>;
 482         };
 483
 484         tlv320aic3106: tlv320aic3106@1b {
 485                 #sound-dai-cells = <0>;
 486                 compatible = "ti,tlv320aic3106";
 487                 reg = <0x1b>;
 488                 status = "okay";
 489
 490                 /* Regulators */
 491                 AVDD-supply = <&vaux2_reg>;
 492                 IOVDD-supply = <&vaux2_reg>;
 493                 DRVDD-supply = <&vaux2_reg>;
 494                 DVDD-supply = <&vbat>;
 495         };
 496 };
 497
 498 &lcdc {
 499         status = "okay";
 500
 501         blue-and-red-wiring = "crossed";
 502 };
 503
 504 &elm {
 505         status = "okay";
 506 };
 507
 508 &epwmss0 {
 509         status = "okay";
 510
 511         ecap0: ecap@48300100 {
 512                 status = "okay";
 513                 pinctrl-names = "default";
 514                 pinctrl-0 = <&ecap0_pins>;
 515         };
 516 };
 517
 518 &gpmc {
 519         status = "okay";
 520         pinctrl-names = "default";
 521         pinctrl-0 = <&nandflash_pins_s0>;
 522         ranges = <0 0 0x08000000 0x1000000>;    /* CS0: 16MB for NAND */
 523         nand@0,0 {
 524                 compatible = "ti,omap2-nand";
 525                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 526                 interrupt-parent = <&gpmc>;
 527                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 528                              <1 IRQ_TYPE_NONE>; /* termcount */
 529                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 530                 ti,nand-ecc-opt = "bch8";
 531                 ti,elm-id = <&elm>;
 532                 nand-bus-width = <8>;
 533                 gpmc,device-width = <1>;
 534                 gpmc,sync-clk-ps = <0>;
 535                 gpmc,cs-on-ns = <0>;
 536                 gpmc,cs-rd-off-ns = <44>;
 537                 gpmc,cs-wr-off-ns = <44>;
 538                 gpmc,adv-on-ns = <6>;
 539                 gpmc,adv-rd-off-ns = <34>;
 540                 gpmc,adv-wr-off-ns = <44>;
 541                 gpmc,we-on-ns = <0>;
 542                 gpmc,we-off-ns = <40>;
 543                 gpmc,oe-on-ns = <0>;
 544                 gpmc,oe-off-ns = <54>;
 545                 gpmc,access-ns = <64>;
 546                 gpmc,rd-cycle-ns = <82>;
 547                 gpmc,wr-cycle-ns = <82>;
 548                 gpmc,bus-turnaround-ns = <0>;
 549                 gpmc,cycle2cycle-delay-ns = <0>;
 550                 gpmc,clk-activation-ns = <0>;
 551                 gpmc,wr-access-ns = <40>;
 552                 gpmc,wr-data-mux-bus-ns = <0>;
 553                 /* MTD partition table */
 554                 /* All SPL-* partitions are sized to minimal length
 555                  * which can be independently programmable. For
 556                  * NAND flash this is equal to size of erase-block */
 557                 #address-cells = <1>;
 558                 #size-cells = <1>;
 559                 partition@0 {
 560                         label = "NAND.SPL";
 561                         reg = <0x00000000 0x000020000>;
 562                 };
 563                 partition@1 {
 564                         label = "NAND.SPL.backup1";
 565                         reg = <0x00020000 0x00020000>;
 566                 };
 567                 partition@2 {
 568                         label = "NAND.SPL.backup2";
 569                         reg = <0x00040000 0x00020000>;
 570                 };
 571                 partition@3 {
 572                         label = "NAND.SPL.backup3";
 573                         reg = <0x00060000 0x00020000>;
 574                 };
 575                 partition@4 {
 576                         label = "NAND.u-boot-spl-os";
 577                         reg = <0x00080000 0x00040000>;
 578                 };
 579                 partition@5 {
 580                         label = "NAND.u-boot";
 581                         reg = <0x000C0000 0x00100000>;
 582                 };
 583                 partition@6 {
 584                         label = "NAND.u-boot-env";
 585                         reg = <0x001C0000 0x00020000>;
 586                 };
 587                 partition@7 {
 588                         label = "NAND.u-boot-env.backup1";
 589                         reg = <0x001E0000 0x00020000>;
 590                 };
 591                 partition@8 {
 592                         label = "NAND.kernel";
 593                         reg = <0x00200000 0x00800000>;
 594                 };
 595                 partition@9 {
 596                         label = "NAND.file-system";
 597                         reg = <0x00A00000 0x0F600000>;
 598                 };
 599         };
 600 };
 601
 602 #include "tps65910.dtsi"
 603
 604 &mcasp1 {
 605         #sound-dai-cells = <0>;
 606         pinctrl-names = "default", "sleep";
 607         pinctrl-0 = <&mcasp1_pins>;
 608         pinctrl-1 = <&mcasp1_pins_sleep>;
 609
 610         status = "okay";
 611
 612         op-mode = <0>;          /* MCASP_IIS_MODE */
 613         tdm-slots = <2>;
 614         /* 4 serializers */
 615         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 616                 0 0 1 2
 617         >;
 618         tx-num-evt = <32>;
 619         rx-num-evt = <32>;
 620 };
 621
 622 &tps {
 623         vcc1-supply = <&vbat>;
 624         vcc2-supply = <&vbat>;
 625         vcc3-supply = <&vbat>;
 626         vcc4-supply = <&vbat>;
 627         vcc5-supply = <&vbat>;
 628         vcc6-supply = <&vbat>;
 629         vcc7-supply = <&vbat>;
 630         vccio-supply = <&vbat>;
 631
 632         regulators {
 633                 vrtc_reg: regulator@0 {
 634                         regulator-always-on;
 635                 };
 636
 637                 vio_reg: regulator@1 {
 638                         regulator-always-on;
 639                 };
 640
 641                 vdd1_reg: regulator@2 {
 642                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 643                         regulator-name = "vdd_mpu";
 644                         regulator-min-microvolt = <912500>;
 645                         regulator-max-microvolt = <1351500>;
 646                         regulator-boot-on;
 647                         regulator-always-on;
 648                 };
 649
 650                 vdd2_reg: regulator@3 {
 651                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 652                         regulator-name = "vdd_core";
 653                         regulator-min-microvolt = <912500>;
 654                         regulator-max-microvolt = <1150000>;
 655                         regulator-boot-on;
 656                         regulator-always-on;
 657                 };
 658
 659                 vdd3_reg: regulator@4 {
 660                         regulator-always-on;
 661                 };
 662
 663                 vdig1_reg: regulator@5 {
 664                         regulator-always-on;
 665                 };
 666
 667                 vdig2_reg: regulator@6 {
 668                         regulator-always-on;
 669                 };
 670
 671                 vpll_reg: regulator@7 {
 672                         regulator-always-on;
 673                 };
 674
 675                 vdac_reg: regulator@8 {
 676                         regulator-always-on;
 677                 };
 678
 679                 vaux1_reg: regulator@9 {
 680                         regulator-always-on;
 681                 };
 682
 683                 vaux2_reg: regulator@10 {
 684                         regulator-always-on;
 685                 };
 686
 687                 vaux33_reg: regulator@11 {
 688                         regulator-always-on;
 689                 };
 690
 691                 vmmc_reg: regulator@12 {
 692                         regulator-min-microvolt = <1800000>;
 693                         regulator-max-microvolt = <3300000>;
 694                         regulator-always-on;
 695                 };
 696         };
 697 };
 698
 699 &mac {
 700         pinctrl-names = "default", "sleep";
 701         pinctrl-0 = <&cpsw_default>;
 702         pinctrl-1 = <&cpsw_sleep>;
 703         status = "okay";
 704 };
 705
 706 &davinci_mdio {
 707         pinctrl-names = "default", "sleep";
 708         pinctrl-0 = <&davinci_mdio_default>;
 709         pinctrl-1 = <&davinci_mdio_sleep>;
 710         status = "okay";
 711 };
 712
 713 &cpsw_emac0 {
 714         phy_id = <&davinci_mdio>, <0>;
 715         phy-mode = "rgmii-txid";
 716 };
 717
 718 &cpsw_emac1 {
 719         phy_id = <&davinci_mdio>, <1>;
 720         phy-mode = "rgmii-txid";
 721 };
 722
 723 &tscadc {
 724         status = "okay";
 725         tsc {
 726                 ti,wires = <4>;
 727                 ti,x-plate-resistance = <200>;
 728                 ti,coordinate-readouts = <5>;
 729                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 730                 ti,charge-delay = <0x400>;
 731         };
 732
 733         adc {
 734                 ti,adc-channels = <4 5 6 7>;
 735         };
 736 };
 737
 738 &mmc1 {
 739         status = "okay";
 740         vmmc-supply = <&vmmc_reg>;
 741         bus-width = <4>;
 742         pinctrl-names = "default";
 743         pinctrl-0 = <&mmc1_pins>;
 744         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 745 };
 746
 747 &mmc3 {
 748         /* these are on the crossbar and are outlined in the
 749            xbar-event-map element */
 750         dmas = <&edma_xbar 12 0 1
 751                 &edma_xbar 13 0 2>;
 752         dma-names = "tx", "rx";
 753         status = "okay";
 754         vmmc-supply = <&wlan_en_reg>;
 755         bus-width = <4>;
 756         pinctrl-names = "default";
 757         pinctrl-0 = <&mmc3_pins &wlan_pins>;
 758         ti,non-removable;
 759         ti,needs-special-hs-handling;
 760         cap-power-off-card;
 761         keep-power-in-suspend;
 762
 763         #address-cells = <1>;
 764         #size-cells = <0>;
 765         wlcore: wlcore@0 {
 766                 compatible = "ti,wl1835";
 767                 reg = <2>;
 768                 interrupt-parent = <&gpio3>;
 769                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 770         };
 771 };
 772
 773 &sham {
 774         status = "okay";
 775 };
 776
 777 &aes {
 778         status = "okay";
 779 };
 780
 781 &dcan1 {
 782         status = "disabled";    /* Enable only if Profile 1 is selected */
 783         pinctrl-names = "default";
 784         pinctrl-0 = <&dcan1_pins_default>;
 785 };