arch/arm/boot/dts/am335x-shc.dts

   1 /*
   2  * support for the bosch am335x based shc c3 board
   3  *
   4  * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 /dts-v1/;
  11
  12 #include "am33xx.dtsi"
  13 #include <dt-bindings/input/input.h>
  14
  15 / {
  16         model = "Bosch SHC";
  17         compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
  18
  19         aliases {
  20                 mmcblk0 = &mmc1;
  21                 mmcblk1 = &mmc2;
  22         };
  23
  24         cpus {
  25                 cpu@0 {
  26                         /*
  27                          * To consider voltage drop between PMIC and SoC,
  28                          * tolerance value is reduced to 2% from 4% and
  29                          * voltage value is increased as a precaution.
  30                          */
  31                         operating-points = <
  32                                 /* kHz    uV */
  33                                 594000  1225000
  34                                 294000  1125000
  35                         >;
  36                         voltage-tolerance = <2>; /* 2 percentage */
  37                         cpu0-supply = <&dcdc2_reg>;
  38                 };
  39         };
  40
  41         gpio_keys {
  42                 compatible = "gpio-keys";
  43
  44                 back_button {
  45                         label = "Back Button";
  46                         gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
  47                         linux,code = <KEY_BACK>;
  48                         debounce-interval = <1000>;
  49                         wakeup-source;
  50                 };
  51
  52                 front_button {
  53                         label = "Front Button";
  54                         gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
  55                         linux,code = <KEY_FRONT>;
  56                         debounce-interval = <1000>;
  57                         wakeup-source;
  58                 };
  59         };
  60
  61         leds {
  62                 pinctrl-names = "default";
  63                 pinctrl-0 = <&user_leds_s0>;
  64
  65                 compatible = "gpio-leds";
  66
  67                 led1 {
  68                         label = "shc:power:red";
  69                         gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
  70                         default-state = "off";
  71                 };
  72
  73                 led2 {
  74                         label = "shc:power:bl";
  75                         gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
  76                         linux,default-trigger = "timer";
  77                         default-state = "on";
  78                 };
  79
  80                 led3 {
  81                         label = "shc:lan:red";
  82                         gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
  83                         default-state = "off";
  84                 };
  85
  86                 led4 {
  87                         label = "shc:lan:bl";
  88                         gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
  89                         default-state = "off";
  90                 };
  91
  92                 led5 {
  93                         label = "shc:cloud:red";
  94                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
  95                         default-state = "off";
  96                 };
  97
  98                 led6 {
  99                         label = "shc:cloud:bl";
 100                         gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 101                         default-state = "off";
 102                 };
 103         };
 104
 105         memory@80000000 {
 106                 device_type = "memory";
 107                 reg = <0x80000000 0x20000000>; /* 512 MB */
 108         };
 109
 110         vmmcsd_fixed: fixedregulator0 {
 111                 compatible = "regulator-fixed";
 112                 regulator-name = "vmmcsd_fixed";
 113                 regulator-min-microvolt = <3300000>;
 114                 regulator-max-microvolt = <3300000>;
 115         };
 116 };
 117
 118 &aes {
 119         status = "okay";
 120 };
 121
 122 &cppi41dma  {
 123         status = "okay";
 124 };
 125
 126 &davinci_mdio {
 127         pinctrl-names = "default", "sleep";
 128         pinctrl-0 = <&davinci_mdio_default>;
 129         pinctrl-1 = <&davinci_mdio_sleep>;
 130         status = "okay";
 131
 132         ethernetphy0: ethernet-phy@0 {
 133                 reg = <0>;
 134                 smsc,disable-energy-detect;
 135         };
 136 };
 137
 138 &epwmss1 {
 139         status = "okay";
 140
 141         ehrpwm1: pwm@48302200 {
 142                 pinctrl-names = "default";
 143                 pinctrl-0 = <&ehrpwm1_pins>;
 144                 status = "okay";
 145         };
 146 };
 147
 148 &gpio1 {
 149         hmtc_rst {
 150                 gpio-hog;
 151                 gpios = <24 GPIO_ACTIVE_LOW>;
 152                 output-high;
 153                 line-name = "homematic_reset";
 154         };
 155
 156         hmtc_prog {
 157                 gpio-hog;
 158                 gpios = <27 GPIO_ACTIVE_LOW>;
 159                 output-high;
 160                 line-name = "homematic_program";
 161         };
 162 };
 163
 164 &gpio3 {
 165         zgb_rst {
 166                 gpio-hog;
 167                 gpios = <18 GPIO_ACTIVE_LOW>;
 168                 output-low;
 169                 line-name = "zigbee_reset";
 170         };
 171
 172         zgb_boot {
 173                 gpio-hog;
 174                 gpios = <19 GPIO_ACTIVE_HIGH>;
 175                 output-high;
 176                 line-name = "zigbee_boot";
 177         };
 178 };
 179
 180 &i2c0 {
 181         pinctrl-names = "default";
 182         pinctrl-0 = <&i2c0_pins>;
 183         status = "okay";
 184         clock-frequency = <400000>;
 185
 186         tps: tps@24 {
 187                 reg = <0x24>;
 188         };
 189
 190         at24@50 {
 191                 compatible = "at24,24c32";
 192                 pagesize = <32>;
 193                 reg = <0x50>;
 194         };
 195
 196         pcf8563@51 {
 197                 compatible = "nxp,pcf8563";
 198                 reg = <0x51>;
 199         };
 200 };
 201
 202 &mac {
 203         pinctrl-names = "default", "sleep";
 204         pinctrl-0 = <&cpsw_default>;
 205         pinctrl-1 = <&cpsw_sleep>;
 206         status = "okay";
 207         slaves = <1>;
 208         cpsw_emac0: slave@4a100200  {
 209                 phy_id = <&davinci_mdio>, <0>;
 210                 phy-mode = "mii";
 211                 phy-handle = <&ethernetphy0>;
 212         };
 213 };
 214
 215 &mmc1 {
 216         pinctrl-names = "default";
 217         pinctrl-0 = <&mmc1_pins>;
 218         bus-width = <0x4>;
 219         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 220         cd-inverted;
 221         max-frequency = <26000000>;
 222         vmmc-supply = <&vmmcsd_fixed>;
 223         status = "okay";
 224 };
 225
 226 &mmc2 {
 227         pinctrl-names = "default";
 228         pinctrl-0 = <&emmc_pins>;
 229         bus-width = <8>;
 230         max-frequency = <26000000>;
 231         sd-uhs-sdr25;
 232         vmmc-supply = <&vmmcsd_fixed>;
 233         status = "okay";
 234 };
 235
 236 &mmc3 {
 237         pinctrl-names = "default";
 238         pinctrl-0 = <&mmc3_pins>;
 239         bus-width = <4>;
 240         cap-power-off-card;
 241         max-frequency = <26000000>;
 242         sd-uhs-sdr25;
 243         vmmc-supply = <&vmmcsd_fixed>;
 244         status = "okay";
 245 };
 246
 247 &rtc {
 248         ti,no-init;
 249 };
 250
 251 &sham {
 252         status = "okay";
 253 };
 254
 255 &tps {
 256         compatible = "ti,tps65217";
 257         ti,pmic-shutdown-controller;
 258
 259         regulators {
 260                 #address-cells = <1>;
 261                 #size-cells = <0>;
 262
 263                 dcdc1_reg: regulator@0 {
 264                         reg = <0>;
 265                         regulator-name = "vdds_dpr";
 266                         regulator-compatible = "dcdc1";
 267                         regulator-min-microvolt = <1300000>;
 268                         regulator-max-microvolt = <1450000>;
 269                         regulator-boot-on;
 270                         regulator-always-on;
 271                 };
 272
 273                 dcdc2_reg: regulator@1 {
 274                         reg = <1>;
 275                         /*
 276                          * VDD_MPU voltage limits 0.95V - 1.26V with
 277                          * +/-4% tolerance
 278                          */
 279                         regulator-compatible = "dcdc2";
 280                         regulator-name = "vdd_mpu";
 281                         regulator-min-microvolt = <925000>;
 282                         regulator-max-microvolt = <1375000>;
 283                         regulator-boot-on;
 284                         regulator-always-on;
 285                         regulator-ramp-delay = <70000>;
 286                 };
 287
 288                 dcdc3_reg: regulator@2 {
 289                         reg = <2>;
 290                         /*
 291                          * VDD_CORE voltage limits 0.95V - 1.1V with
 292                          * +/-4% tolerance
 293                          */
 294                         regulator-name = "vdd_core";
 295                         regulator-compatible = "dcdc3";
 296                         regulator-min-microvolt = <925000>;
 297                         regulator-max-microvolt = <1125000>;
 298                         regulator-boot-on;
 299                         regulator-always-on;
 300                 };
 301
 302                 ldo1_reg: regulator@3 {
 303                         reg = <3>;
 304                         regulator-name = "vio,vrtc,vdds";
 305                         regulator-compatible = "ldo1";
 306                         regulator-min-microvolt = <1000000>;
 307                         regulator-max-microvolt = <1800000>;
 308                         regulator-always-on;
 309                 };
 310
 311                 ldo2_reg: regulator@4 {
 312                         reg = <4>;
 313                         regulator-name = "vdd_3v3aux";
 314                         regulator-compatible = "ldo2";
 315                         regulator-min-microvolt = <900000>;
 316                         regulator-max-microvolt = <3300000>;
 317                         regulator-always-on;
 318                 };
 319
 320                 ldo3_reg: regulator@5 {
 321                         reg = <5>;
 322                         regulator-name = "vdd_1v8";
 323                         regulator-compatible = "ldo3";
 324                         regulator-min-microvolt = <900000>;
 325                         regulator-max-microvolt = <1800000>;
 326                         regulator-always-on;
 327                 };
 328
 329                 ldo4_reg: regulator@6 {
 330                         reg = <6>;
 331                         regulator-name = "vdd_3v3a";
 332                         regulator-compatible = "ldo4";
 333                         regulator-min-microvolt = <1800000>;
 334                         regulator-max-microvolt = <3300000>;
 335                         regulator-always-on;
 336                 };
 337         };
 338 };
 339
 340 &uart0 {
 341         pinctrl-names = "default";
 342         pinctrl-0 = <&uart0_pins>;
 343         status = "okay";
 344 };
 345
 346 &uart1 {
 347         pinctrl-names = "default";
 348         pinctrl-0 = <&uart1_pins>;
 349         status = "okay";
 350 };
 351
 352 &uart2 {
 353         pinctrl-names = "default";
 354         pinctrl-0 = <&uart2_pins>;
 355         status = "okay";
 356 };
 357
 358 &uart4 {
 359         pinctrl-names = "default";
 360         pinctrl-0 = <&uart4_pins>;
 361         status = "okay";
 362 };
 363
 364 &usb {
 365         status = "okay";
 366 };
 367
 368 &usb_ctrl_mod {
 369         status = "okay";
 370 };
 371
 372 &usb1_phy {
 373         status = "okay";
 374 };
 375
 376 &usb1 {
 377         status = "okay";
 378         dr_mode = "host";
 379 };
 380
 381 &am33xx_pinmux {
 382         pinctrl-names = "default";
 383         pinctrl-0 = <&clkout2_pin>;
 384
 385         clkout2_pin: pinmux_clkout2_pin {
 386                 pinctrl-single,pins = <
 387                         /* xdma_event_intr1.clkout2 */
 388                         AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
 389                 >;
 390         };
 391
 392         cpsw_default: cpsw_default {
 393                 pinctrl-single,pins = <
 394                         /* Slave 1 */
 395                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
 396                         AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
 397                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
 398                         AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
 399                         AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
 400                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
 401                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
 402                         AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
 403                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
 404                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
 405                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
 406                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
 407                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
 408                 >;
 409         };
 410
 411         cpsw_sleep: cpsw_sleep {
 412                 pinctrl-single,pins = <
 413                         /* Slave 1 reset value */
 414                         AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 415                         AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 416                         AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 417                         AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 418                         AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
 419                         AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 420                         AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 421                         AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 422                         AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
 423                         AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 424                         AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
 425                         AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 426                         AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 427                 >;
 428         };
 429
 430         davinci_mdio_default: davinci_mdio_default {
 431                 pinctrl-single,pins = <
 432                         /* mdio_data.mdio_data */
 433                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
 434                         /* mdio_clk.mdio_clk */
 435                         AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
 436                 >;
 437         };
 438
 439         davinci_mdio_sleep: davinci_mdio_sleep {
 440                 pinctrl-single,pins = <
 441                         /* MDIO reset value */
 442                         AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 443                         AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 444                 >;
 445         };
 446
 447         ehrpwm1_pins: pinmux_ehrpwm1 {
 448                 pinctrl-single,pins = <
 449                         AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
 450                 >;
 451         };
 452
 453         emmc_pins: pinmux_emmc_pins {
 454                 pinctrl-single,pins = <
 455                         AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
 456                         AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
 457                         AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
 458                         AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
 459                         AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
 460                         AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
 461                         AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
 462                         AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
 463                         AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
 464                         AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
 465                 >;
 466         };
 467
 468         i2c0_pins: pinmux_i2c0_pins {
 469                 pinctrl-single,pins = <
 470                         AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
 471                         AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
 472                 >;
 473         };
 474
 475         mmc1_pins: pinmux_mmc1_pins {
 476                 pinctrl-single,pins = <
 477                         AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
 478                 >;
 479         };
 480
 481         mmc3_pins: pinmux_mmc3_pins {
 482                 pinctrl-single,pins = <
 483                         AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
 484                         AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
 485                         AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
 486                         AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
 487                         AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
 488                         AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
 489                 >;
 490         };
 491
 492         uart0_pins: pinmux_uart0_pins {
 493                 pinctrl-single,pins = <
 494                         AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
 495                         AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
 496                         AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
 497                         AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
 498                 >;
 499         };
 500
 501         uart1_pins: pinmux_uart1 {
 502                 pinctrl-single,pins = <
 503                         AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
 504                         AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
 505                         AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
 506                         AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
 507                 >;
 508         };
 509
 510         uart2_pins: pinmux_uart2_pins {
 511                 pinctrl-single,pins = <
 512                         AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
 513                         AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
 514                 >;
 515         };
 516
 517         uart4_pins: pinmux_uart4_pins {
 518                 pinctrl-single,pins = <
 519                         AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
 520                         AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
 521                 >;
 522         };
 523
 524         user_leds_s0: user_leds_s0 {
 525                 pinctrl-single,pins = <
 526                         AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
 527                         AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
 528                         AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
 529                         AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
 530                         AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
 531                         AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
 532                         AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
 533                         AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 534                         AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
 535                         AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
 536                         AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
 537                         AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
 538                         AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
 539                         AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
 540                         AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
 541                         AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
 542                         AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
 543                         AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
 544                         AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
 545                         AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
 546                         AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
 547                         AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
 548                         AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
 549                         AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
 550                         AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
 551                         AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
 552                         AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
 553                         AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
 554                         AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
 555                         AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
 556                         AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
 557                         AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
 558                         AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
 559                         AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
 560                         AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
 561                         AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
 562                         AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
 563                         AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
 564                         AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
 565                         AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
 566                         AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
 567                         AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 568                         AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
 569                         AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
 570                         AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
 571                         AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 572                         AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 573                         AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
 574                         AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
 575                 >;
 576         };
 577 };