Merge branch 'pm-cpufreq'
[cascardo/linux.git] / arch / arm / boot / dts / bcm958525xmc.dts
1 /*
2  *  BSD LICENSE
3  *
4  *  Copyright(c) 2016 Broadcom.  All rights reserved.
5  *
6  *  Redistribution and use in source and binary forms, with or without
7  *  modification, are permitted provided that the following conditions
8  *  are met:
9  *
10  *    * Redistributions of source code must retain the above copyright
11  *      notice, this list of conditions and the following disclaimer.
12  *    * Redistributions in binary form must reproduce the above copyright
13  *      notice, this list of conditions and the following disclaimer in
14  *      the documentation and/or other materials provided with the
15  *      distribution.
16  *    * Neither the name of Broadcom Corporation nor the names of its
17  *      contributors may be used to endorse or promote products derived
18  *      from this software without specific prior written permission.
19  *
20  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23  *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24  *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25  *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26  *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27  *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28  *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  */
32
33 /dts-v1/;
34
35 #include "bcm-nsp.dtsi"
36 #include <dt-bindings/gpio/gpio.h>
37
38 / {
39         model = "NorthStar Plus XMC (BCM958525xmc)";
40         compatible = "brcm,bcm58525", "brcm,nsp";
41
42         aliases {
43                 serial0 = &uart0;
44         };
45
46         chosen {
47                 stdout-path = "serial0:115200n8";
48         };
49
50         memory {
51                 device_type = "memory";
52                 reg = <0x60000000 0x40000000>;
53         };
54
55         gpio-restart {
56                 compatible = "gpio-restart";
57                 gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
58                 priority = <200>;
59         };
60 };
61
62 &i2c0 {
63         temperature-sensor@4c {
64                 compatible = "adi,adt7461a";
65                 reg = <0x4c>;
66         };
67
68         eeprom@52 {
69                 compatible = "atmel,24c02";
70                 reg = <0x52>;
71                 pagesize = <16>;
72         };
73
74         rtc@68 {
75                 compatible = "st,m41t81";
76                 reg = <0x68>;
77         };
78 };
79
80 &nand {
81         nandcs@0 {
82                 compatible = "brcm,nandcs";
83                 reg = <0>;
84                 nand-on-flash-bbt;
85
86                 #address-cells = <1>;
87                 #size-cells = <1>;
88
89                 nand-ecc-strength = <24>;
90                 nand-ecc-step-size = <1024>;
91
92                 brcm,nand-oob-sector-size = <27>;
93
94                 partition@0 {
95                         label = "nboot";
96                         reg = <0x00000000 0x00200000>;
97                         read-only;
98                 };
99                 partition@200000 {
100                         label = "nenv";
101                         reg = <0x00200000 0x00400000>;
102                 };
103                 partition@600000 {
104                         label = "nsystem";
105                         reg = <0x00600000 0x00a00000>;
106                 };
107                 partition@1000000 {
108                         label = "nrootfs";
109                         reg = <0x01000000 0x03000000>;
110                 };
111                 partition@4000000 {
112                         label = "ncustfs";
113                         reg = <0x04000000 0x3c000000>;
114                 };
115         };
116 };
117
118 /* XHCI, MMC, and Ethernet support needed to be complete */
119
120 &uart0 {
121         status = "okay";
122 };
123
124 &pcie0 {
125         status = "okay";
126 };
127
128 &pcie1 {
129         status = "okay";
130 };
131
132 &sata_phy0 {
133         status = "okay";
134 };
135
136 &sata_phy1 {
137         status = "okay";
138 };
139
140 &sata {
141         status = "okay";
142 };
143
144 &pinctrl {
145         pinctrl-names = "default";
146         pinctrl-0 = <&nand_sel>;
147         nand_sel: nand_sel {
148                 function = "nand";
149                 groups = "nand_grp";
150         };
151 };