arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

   1 /*
   2  * Copyright 2013 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 / {
  15         /* these are used by bootloader for disabling nodes */
  16         aliases {
  17                 ethernet1 = &eth1;
  18                 led0 = &led0;
  19                 led1 = &led1;
  20                 led2 = &led2;
  21                 nand = &gpmi;
  22                 ssi0 = &ssi1;
  23                 usb0 = &usbh1;
  24                 usb1 = &usbotg;
  25         };
  26
  27         chosen {
  28                 bootargs = "console=ttymxc1,115200";
  29         };
  30
  31         backlight {
  32                 compatible = "pwm-backlight";
  33                 pwms = <&pwm4 0 5000000>;
  34                 brightness-levels = <0 4 8 16 32 64 128 255>;
  35                 default-brightness-level = <7>;
  36         };
  37
  38         leds {
  39                 compatible = "gpio-leds";
  40                 pinctrl-names = "default";
  41                 pinctrl-0 = <&pinctrl_gpio_leds>;
  42
  43                 led0: user1 {
  44                         label = "user1";
  45                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  46                         default-state = "on";
  47                         linux,default-trigger = "heartbeat";
  48                 };
  49
  50                 led1: user2 {
  51                         label = "user2";
  52                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  53                         default-state = "off";
  54                 };
  55
  56                 led2: user3 {
  57                         label = "user3";
  58                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  59                         default-state = "off";
  60                 };
  61         };
  62
  63         memory {
  64                 reg = <0x10000000 0x40000000>;
  65         };
  66
  67         pps {
  68                 compatible = "pps-gpio";
  69                 pinctrl-names = "default";
  70                 pinctrl-0 = <&pinctrl_pps>;
  71                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  72                 status = "okay";
  73         };
  74
  75         regulators {
  76                 compatible = "simple-bus";
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79
  80                 reg_1p0v: regulator@0 {
  81                         compatible = "regulator-fixed";
  82                         reg = <0>;
  83                         regulator-name = "1P0V";
  84                         regulator-min-microvolt = <1000000>;
  85                         regulator-max-microvolt = <1000000>;
  86                         regulator-always-on;
  87                 };
  88
  89                 reg_3p3v: regulator@1 {
  90                         compatible = "regulator-fixed";
  91                         reg = <1>;
  92                         regulator-name = "3P3V";
  93                         regulator-min-microvolt = <3300000>;
  94                         regulator-max-microvolt = <3300000>;
  95                         regulator-always-on;
  96                 };
  97
  98                 reg_usb_h1_vbus: regulator@2 {
  99                         compatible = "regulator-fixed";
 100                         reg = <2>;
 101                         regulator-name = "usb_h1_vbus";
 102                         regulator-min-microvolt = <5000000>;
 103                         regulator-max-microvolt = <5000000>;
 104                         regulator-always-on;
 105                 };
 106
 107                 reg_usb_otg_vbus: regulator@3 {
 108                         compatible = "regulator-fixed";
 109                         reg = <3>;
 110                         regulator-name = "usb_otg_vbus";
 111                         regulator-min-microvolt = <5000000>;
 112                         regulator-max-microvolt = <5000000>;
 113                         gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 114                         enable-active-high;
 115                 };
 116         };
 117
 118         sound {
 119                 compatible = "fsl,imx6q-ventana-sgtl5000",
 120                              "fsl,imx-audio-sgtl5000";
 121                 model = "sgtl5000-audio";
 122                 ssi-controller = <&ssi1>;
 123                 audio-codec = <&codec>;
 124                 audio-routing =
 125                         "MIC_IN", "Mic Jack",
 126                         "Mic Jack", "Mic Bias",
 127                         "Headphone Jack", "HP_OUT";
 128                 mux-int-port = <1>;
 129                 mux-ext-port = <4>;
 130         };
 131 };
 132
 133 &audmux {
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
 136         status = "okay";
 137 };
 138
 139 &can1 {
 140         pinctrl-names = "default";
 141         pinctrl-0 = <&pinctrl_flexcan1>;
 142         status = "okay";
 143 };
 144
 145 &clks {
 146         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 147                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 148         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 149                           <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 150 };
 151
 152 &fec {
 153         pinctrl-names = "default";
 154         pinctrl-0 = <&pinctrl_enet>;
 155         phy-mode = "rgmii-id";
 156         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 157         status = "okay";
 158 };
 159
 160 &gpmi {
 161         pinctrl-names = "default";
 162         pinctrl-0 = <&pinctrl_gpmi_nand>;
 163         status = "okay";
 164 };
 165
 166 &hdmi {
 167         ddc-i2c-bus = <&i2c3>;
 168         status = "okay";
 169 };
 170
 171 &i2c1 {
 172         clock-frequency = <100000>;
 173         pinctrl-names = "default";
 174         pinctrl-0 = <&pinctrl_i2c1>;
 175         status = "okay";
 176
 177         eeprom1: eeprom@50 {
 178                 compatible = "atmel,24c02";
 179                 reg = <0x50>;
 180                 pagesize = <16>;
 181         };
 182
 183         eeprom2: eeprom@51 {
 184                 compatible = "atmel,24c02";
 185                 reg = <0x51>;
 186                 pagesize = <16>;
 187         };
 188
 189         eeprom3: eeprom@52 {
 190                 compatible = "atmel,24c02";
 191                 reg = <0x52>;
 192                 pagesize = <16>;
 193         };
 194
 195         eeprom4: eeprom@53 {
 196                 compatible = "atmel,24c02";
 197                 reg = <0x53>;
 198                 pagesize = <16>;
 199         };
 200
 201         gpio: pca9555@23 {
 202                 compatible = "nxp,pca9555";
 203                 reg = <0x23>;
 204                 gpio-controller;
 205                 #gpio-cells = <2>;
 206         };
 207
 208         rtc: ds1672@68 {
 209                 compatible = "dallas,ds1672";
 210                 reg = <0x68>;
 211         };
 212 };
 213
 214 &i2c2 {
 215         clock-frequency = <100000>;
 216         pinctrl-names = "default";
 217         pinctrl-0 = <&pinctrl_i2c2>;
 218         status = "okay";
 219
 220         pmic: pfuze100@08 {
 221                 compatible = "fsl,pfuze100";
 222                 reg = <0x08>;
 223
 224                 regulators {
 225                         sw1a_reg: sw1ab {
 226                                 regulator-min-microvolt = <300000>;
 227                                 regulator-max-microvolt = <1875000>;
 228                                 regulator-boot-on;
 229                                 regulator-always-on;
 230                                 regulator-ramp-delay = <6250>;
 231                         };
 232
 233                         sw1c_reg: sw1c {
 234                                 regulator-min-microvolt = <300000>;
 235                                 regulator-max-microvolt = <1875000>;
 236                                 regulator-boot-on;
 237                                 regulator-always-on;
 238                                 regulator-ramp-delay = <6250>;
 239                         };
 240
 241                         sw2_reg: sw2 {
 242                                 regulator-min-microvolt = <800000>;
 243                                 regulator-max-microvolt = <3950000>;
 244                                 regulator-boot-on;
 245                                 regulator-always-on;
 246                         };
 247
 248                         sw3a_reg: sw3a {
 249                                 regulator-min-microvolt = <400000>;
 250                                 regulator-max-microvolt = <1975000>;
 251                                 regulator-boot-on;
 252                                 regulator-always-on;
 253                         };
 254
 255                         sw3b_reg: sw3b {
 256                                 regulator-min-microvolt = <400000>;
 257                                 regulator-max-microvolt = <1975000>;
 258                                 regulator-boot-on;
 259                                 regulator-always-on;
 260                         };
 261
 262                         sw4_reg: sw4 {
 263                                 regulator-min-microvolt = <800000>;
 264                                 regulator-max-microvolt = <3300000>;
 265                         };
 266
 267                         swbst_reg: swbst {
 268                                 regulator-min-microvolt = <5000000>;
 269                                 regulator-max-microvolt = <5150000>;
 270                                 regulator-boot-on;
 271                                 regulator-always-on;
 272                         };
 273
 274                         snvs_reg: vsnvs {
 275                                 regulator-min-microvolt = <1000000>;
 276                                 regulator-max-microvolt = <3000000>;
 277                                 regulator-boot-on;
 278                                 regulator-always-on;
 279                         };
 280
 281                         vref_reg: vrefddr {
 282                                 regulator-boot-on;
 283                                 regulator-always-on;
 284                         };
 285
 286                         vgen1_reg: vgen1 {
 287                                 regulator-min-microvolt = <800000>;
 288                                 regulator-max-microvolt = <1550000>;
 289                         };
 290
 291                         vgen2_reg: vgen2 {
 292                                 regulator-min-microvolt = <800000>;
 293                                 regulator-max-microvolt = <1550000>;
 294                         };
 295
 296                         vgen3_reg: vgen3 {
 297                                 regulator-min-microvolt = <1800000>;
 298                                 regulator-max-microvolt = <3300000>;
 299                         };
 300
 301                         vgen4_reg: vgen4 {
 302                                 regulator-min-microvolt = <1800000>;
 303                                 regulator-max-microvolt = <3300000>;
 304                                 regulator-always-on;
 305                         };
 306
 307                         vgen5_reg: vgen5 {
 308                                 regulator-min-microvolt = <1800000>;
 309                                 regulator-max-microvolt = <3300000>;
 310                                 regulator-always-on;
 311                         };
 312
 313                         vgen6_reg: vgen6 {
 314                                 regulator-min-microvolt = <1800000>;
 315                                 regulator-max-microvolt = <3300000>;
 316                                 regulator-always-on;
 317                         };
 318                 };
 319         };
 320 };
 321
 322 &i2c3 {
 323         clock-frequency = <100000>;
 324         pinctrl-names = "default";
 325         pinctrl-0 = <&pinctrl_i2c3>;
 326         status = "okay";
 327
 328         codec: sgtl5000@0a {
 329                 compatible = "fsl,sgtl5000";
 330                 reg = <0x0a>;
 331                 clocks = <&clks IMX6QDL_CLK_CKO>;
 332                 VDDA-supply = <&sw4_reg>;
 333                 VDDIO-supply = <&reg_3p3v>;
 334         };
 335
 336         touchscreen: egalax_ts@04 {
 337                 compatible = "eeti,egalax_ts";
 338                 reg = <0x04>;
 339                 interrupt-parent = <&gpio7>;
 340                 interrupts = <12 2>;
 341                 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 342         };
 343 };
 344
 345 &ldb {
 346         status = "okay";
 347
 348         lvds-channel@0 {
 349                 fsl,data-mapping = "spwg";
 350                 fsl,data-width = <18>;
 351                 status = "okay";
 352
 353                 display-timings {
 354                         native-mode = <&timing0>;
 355                         timing0: hsd100pxn1 {
 356                                 clock-frequency = <65000000>;
 357                                 hactive = <1024>;
 358                                 vactive = <768>;
 359                                 hback-porch = <220>;
 360                                 hfront-porch = <40>;
 361                                 vback-porch = <21>;
 362                                 vfront-porch = <7>;
 363                                 hsync-len = <60>;
 364                                 vsync-len = <10>;
 365                         };
 366                 };
 367         };
 368 };
 369
 370 &pcie {
 371         pinctrl-names = "default";
 372         pinctrl-0 = <&pinctrl_pcie>;
 373         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 374         status = "okay";
 375
 376         eth1: sky2@8 { /* MAC/PHY on bus 8 */
 377                 compatible = "marvell,sky2";
 378         };
 379 };
 380
 381 &pwm1 {
 382         pinctrl-names = "default";
 383         pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
 384         status = "disabled";
 385 };
 386
 387 &pwm2 {
 388         pinctrl-names = "default";
 389         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 390         status = "disabled";
 391 };
 392
 393 &pwm3 {
 394         pinctrl-names = "default";
 395         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 396         status = "disabled";
 397 };
 398
 399 &pwm4 {
 400         pinctrl-names = "default", "state_dio";
 401         pinctrl-0 = <&pinctrl_pwm4_backlight>;
 402         pinctrl-1 = <&pinctrl_pwm4_dio>;
 403         status = "okay";
 404 };
 405
 406 &ssi1 {
 407         status = "okay";
 408 };
 409
 410 &ssi2 {
 411         status = "okay";
 412 };
 413
 414 &uart1 {
 415         pinctrl-names = "default";
 416         pinctrl-0 = <&pinctrl_uart1>;
 417         uart-has-rtscts;
 418         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 419         status = "okay";
 420 };
 421
 422 &uart2 {
 423         pinctrl-names = "default";
 424         pinctrl-0 = <&pinctrl_uart2>;
 425         status = "okay";
 426 };
 427
 428 &uart5 {
 429         pinctrl-names = "default";
 430         pinctrl-0 = <&pinctrl_uart5>;
 431         status = "okay";
 432 };
 433
 434 &usbotg {
 435         vbus-supply = <&reg_usb_otg_vbus>;
 436         pinctrl-names = "default";
 437         pinctrl-0 = <&pinctrl_usbotg>;
 438         disable-over-current;
 439         status = "okay";
 440 };
 441
 442 &usbh1 {
 443         vbus-supply = <&reg_usb_h1_vbus>;
 444         status = "okay";
 445 };
 446
 447 &usdhc3 {
 448         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 449         pinctrl-0 = <&pinctrl_usdhc3>;
 450         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 451         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 452         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 453         vmmc-supply = <&reg_3p3v>;
 454         no-1-8-v; /* firmware will remove if board revision supports */
 455         status = "okay";
 456 };
 457
 458 &wdog1 {
 459         status = "disabled";
 460 };
 461
 462 &wdog2 {
 463         pinctrl-names = "default";
 464         pinctrl-0 = <&pinctrl_wdog>;
 465         fsl,ext-reset-output;
 466         status = "okay";
 467 };
 468
 469 &iomuxc {
 470         imx6qdl-gw54xx {
 471                 pinctrl_audmux: audmuxgrp {
 472                         fsl,pins = <
 473                                 MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
 474                                 MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
 475                                 MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
 476                                 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
 477                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
 478                         >;
 479                 };
 480
 481                 pinctrl_enet: enetgrp {
 482                         fsl,pins = <
 483                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 484                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 485                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 486                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 487                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 488                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 489                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 490                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 491                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 492                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 493                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 494                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 495                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 496                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 497                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 498                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 499                         >;
 500                 };
 501
 502                 pinctrl_flexcan1: flexcan1grp {
 503                         fsl,pins = <
 504                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
 505                                 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
 506                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x4001b0b0 /* CAN_STBY */
 507                         >;
 508                 };
 509
 510                 pinctrl_gpio_leds: gpioledsgrp {
 511                         fsl,pins = <
 512                                 MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
 513                                 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
 514                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
 515                         >;
 516                 };
 517
 518                 pinctrl_gpmi_nand: gpminandgrp {
 519                         fsl,pins = <
 520                                 MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 521                                 MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 522                                 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 523                                 MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 524                                 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 525                                 MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 526                                 MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 527                                 MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 528                                 MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 529                                 MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 530                                 MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 531                                 MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 532                                 MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 533                                 MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 534                                 MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 535                         >;
 536                 };
 537
 538                 pinctrl_i2c1: i2c1grp {
 539                         fsl,pins = <
 540                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 541                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 542                         >;
 543                 };
 544
 545                 pinctrl_i2c2: i2c2grp {
 546                         fsl,pins = <
 547                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 548                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 549                         >;
 550                 };
 551
 552                 pinctrl_i2c3: i2c3grp {
 553                         fsl,pins = <
 554                                 MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 555                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 556                         >;
 557                 };
 558
 559                 pinctrl_pcie: pciegrp {
 560                         fsl,pins = <
 561                                 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0 /* PCIE IRQ */
 562                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE RST */
 563                         >;
 564                 };
 565
 566                 pinctrl_pps: ppsgrp {
 567                         fsl,pins = <
 568                                 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 569                         >;
 570                 };
 571
 572                 pinctrl_pwm1: pwm1grp {
 573                         fsl,pins = <
 574                                 MX6QDL_PAD_GPIO_9__PWM1_OUT             0x1b0b1
 575                         >;
 576                 };
 577
 578                 pinctrl_pwm2: pwm2grp {
 579                         fsl,pins = <
 580                                 MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 581                         >;
 582                 };
 583
 584                 pinctrl_pwm3: pwm3grp {
 585                         fsl,pins = <
 586                                 MX6QDL_PAD_SD4_DAT1__PWM3_OUT           0x1b0b1
 587                         >;
 588                 };
 589
 590                 pinctrl_pwm4_backlight: pwm4grpbacklight {
 591                         fsl,pins = <
 592                                 /* LVDS_PWM J6.5 */
 593                                 MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 594                         >;
 595                 };
 596
 597                 pinctrl_pwm4_dio: pwm4grpdio {
 598                         fsl,pins = <
 599                                 /* DIO3 J16.4 */
 600                                 MX6QDL_PAD_SD4_DAT2__PWM4_OUT           0x1b0b1
 601                         >;
 602                 };
 603
 604                 pinctrl_uart1: uart1grp {
 605                         fsl,pins = <
 606                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 607                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 608                                 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
 609                         >;
 610                 };
 611
 612                 pinctrl_uart2: uart2grp {
 613                         fsl,pins = <
 614                                 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 615                                 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 616                         >;
 617                 };
 618
 619                 pinctrl_uart5: uart5grp {
 620                         fsl,pins = <
 621                                 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 622                                 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 623                         >;
 624                 };
 625
 626                 pinctrl_usbotg: usbotggrp {
 627                         fsl,pins = <
 628                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 629                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
 630                         >;
 631                 };
 632
 633                 pinctrl_usdhc3: usdhc3grp {
 634                         fsl,pins = <
 635                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 636                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 637                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 638                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 639                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 640                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 641                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 642                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 643                         >;
 644                 };
 645
 646                 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 647                         fsl,pins = <
 648                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 649                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100b9
 650                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 651                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 652                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 653                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 654                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 655                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 656                         >;
 657                 };
 658
 659                 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 660                         fsl,pins = <
 661                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 662                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 663                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 664                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 665                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 666                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 667                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 668                                 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 669                         >;
 670                 };
 671
 672                 pinctrl_wdog: wdoggrp {
 673                         fsl,pins = <
 674                                 MX6QDL_PAD_SD1_DAT3__WDOG2_B            0x1b0b0
 675                         >;
 676                 };
 677         };
 678 };