arch/arm/boot/dts/imx7s.dtsi

   1 /*
   2  * Copyright 2015 Freescale Semiconductor, Inc.
   3  * Copyright 2016 Toradex AG
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This file is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License as
  12  *     published by the Free Software Foundation; either version 2 of the
  13  *     License, or (at your option) any later version.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43
  44 #include <dt-bindings/clock/imx7d-clock.h>
  45 #include <dt-bindings/gpio/gpio.h>
  46 #include <dt-bindings/input/input.h>
  47 #include <dt-bindings/interrupt-controller/arm-gic.h>
  48 #include "imx7d-pinfunc.h"
  49 #include "skeleton.dtsi"
  50
  51 / {
  52         aliases {
  53                 gpio0 = &gpio1;
  54                 gpio1 = &gpio2;
  55                 gpio2 = &gpio3;
  56                 gpio3 = &gpio4;
  57                 gpio4 = &gpio5;
  58                 gpio5 = &gpio6;
  59                 gpio6 = &gpio7;
  60                 i2c0 = &i2c1;
  61                 i2c1 = &i2c2;
  62                 i2c2 = &i2c3;
  63                 i2c3 = &i2c4;
  64                 mmc0 = &usdhc1;
  65                 mmc1 = &usdhc2;
  66                 mmc2 = &usdhc3;
  67                 serial0 = &uart1;
  68                 serial1 = &uart2;
  69                 serial2 = &uart3;
  70                 serial3 = &uart4;
  71                 serial4 = &uart5;
  72                 serial5 = &uart6;
  73                 serial6 = &uart7;
  74                 spi0 = &ecspi1;
  75                 spi1 = &ecspi2;
  76                 spi2 = &ecspi3;
  77                 spi3 = &ecspi4;
  78         };
  79
  80         cpus {
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83
  84                 cpu0: cpu@0 {
  85                         compatible = "arm,cortex-a7";
  86                         device_type = "cpu";
  87                         reg = <0>;
  88                         clock-frequency = <792000000>;
  89                         clock-latency = <61036>; /* two CLK32 periods */
  90                         clocks = <&clks IMX7D_CLK_ARM>;
  91                 };
  92         };
  93
  94         ckil: clock-cki {
  95                 compatible = "fixed-clock";
  96                 #clock-cells = <0>;
  97                 clock-frequency = <32768>;
  98                 clock-output-names = "ckil";
  99         };
 100
 101         osc: clock-osc {
 102                 compatible = "fixed-clock";
 103                 #clock-cells = <0>;
 104                 clock-frequency = <24000000>;
 105                 clock-output-names = "osc";
 106         };
 107
 108         soc {
 109                 #address-cells = <1>;
 110                 #size-cells = <1>;
 111                 compatible = "simple-bus";
 112                 interrupt-parent = <&intc>;
 113                 ranges;
 114
 115                 funnel@30041000 {
 116                         compatible = "arm,coresight-funnel", "arm,primecell";
 117                         reg = <0x30041000 0x1000>;
 118                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 119                         clock-names = "apb_pclk";
 120
 121                         ca_funnel_ports: ports {
 122                                 #address-cells = <1>;
 123                                 #size-cells = <0>;
 124
 125                                 /* funnel input ports */
 126                                 port@0 {
 127                                         reg = <0>;
 128                                         ca_funnel_in_port0: endpoint {
 129                                                 slave-mode;
 130                                                 remote-endpoint = <&etm0_out_port>;
 131                                         };
 132                                 };
 133
 134                                 /* funnel output port */
 135                                 port@2 {
 136                                         reg = <0>;
 137                                         ca_funnel_out_port0: endpoint {
 138                                                 remote-endpoint = <&hugo_funnel_in_port0>;
 139                                         };
 140                                 };
 141
 142                                 /* the other input ports are not connect to anything */
 143                         };
 144                 };
 145
 146                 etm@3007c000 {
 147                         compatible = "arm,coresight-etm3x", "arm,primecell";
 148                         reg = <0x3007c000 0x1000>;
 149                         cpu = <&cpu0>;
 150                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 151                         clock-names = "apb_pclk";
 152
 153                         port {
 154                                 etm0_out_port: endpoint {
 155                                         remote-endpoint = <&ca_funnel_in_port0>;
 156                                 };
 157                         };
 158                 };
 159
 160                 funnel@30083000 {
 161                         compatible = "arm,coresight-funnel", "arm,primecell";
 162                         reg = <0x30083000 0x1000>;
 163                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 164                         clock-names = "apb_pclk";
 165
 166                         ports {
 167                                 #address-cells = <1>;
 168                                 #size-cells = <0>;
 169
 170                                 /* funnel input ports */
 171                                 port@0 {
 172                                         reg = <0>;
 173                                         hugo_funnel_in_port0: endpoint {
 174                                                 slave-mode;
 175                                                 remote-endpoint = <&ca_funnel_out_port0>;
 176                                         };
 177                                 };
 178
 179                                 port@1 {
 180                                         reg = <1>;
 181                                         hugo_funnel_in_port1: endpoint {
 182                                                 slave-mode; /* M4 input */
 183                                         };
 184                                 };
 185
 186                                 port@2 {
 187                                         reg = <0>;
 188                                         hugo_funnel_out_port0: endpoint {
 189                                                 remote-endpoint = <&etf_in_port>;
 190                                         };
 191                                 };
 192
 193                                 /* the other input ports are not connect to anything */
 194                         };
 195                 };
 196
 197                 etf@30084000 {
 198                         compatible = "arm,coresight-tmc", "arm,primecell";
 199                         reg = <0x30084000 0x1000>;
 200                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 201                         clock-names = "apb_pclk";
 202
 203                         ports {
 204                                 #address-cells = <1>;
 205                                 #size-cells = <0>;
 206
 207                                 port@0 {
 208                                         reg = <0>;
 209                                         etf_in_port: endpoint {
 210                                                 slave-mode;
 211                                                 remote-endpoint = <&hugo_funnel_out_port0>;
 212                                         };
 213                                 };
 214
 215                                 port@1 {
 216                                         reg = <0>;
 217                                         etf_out_port: endpoint {
 218                                                 remote-endpoint = <&replicator_in_port0>;
 219                                         };
 220                                 };
 221                         };
 222                 };
 223
 224                 etr@30086000 {
 225                         compatible = "arm,coresight-tmc", "arm,primecell";
 226                         reg = <0x30086000 0x1000>;
 227                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 228                         clock-names = "apb_pclk";
 229
 230                         port {
 231                                 etr_in_port: endpoint {
 232                                         slave-mode;
 233                                         remote-endpoint = <&replicator_out_port1>;
 234                                 };
 235                         };
 236                 };
 237
 238                 tpiu@30087000 {
 239                         compatible = "arm,coresight-tpiu", "arm,primecell";
 240                         reg = <0x30087000 0x1000>;
 241                         clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
 242                         clock-names = "apb_pclk";
 243
 244                         port {
 245                                 tpiu_in_port: endpoint {
 246                                         slave-mode;
 247                                         remote-endpoint = <&replicator_out_port1>;
 248                                 };
 249                         };
 250                 };
 251
 252                 replicator {
 253                         /*
 254                          * non-configurable replicators don't show up on the
 255                          * AMBA bus.  As such no need to add "arm,primecell"
 256                          */
 257                         compatible = "arm,coresight-replicator";
 258
 259                         ports {
 260                                 #address-cells = <1>;
 261                                 #size-cells = <0>;
 262
 263                                 /* replicator output ports */
 264                                 port@0 {
 265                                         reg = <0>;
 266                                         replicator_out_port0: endpoint {
 267                                                 remote-endpoint = <&tpiu_in_port>;
 268                                         };
 269                                 };
 270
 271                                 port@1 {
 272                                         reg = <1>;
 273                                         replicator_out_port1: endpoint {
 274                                                 remote-endpoint = <&etr_in_port>;
 275                                         };
 276                                 };
 277
 278                                 /* replicator input port */
 279                                 port@2 {
 280                                         reg = <0>;
 281                                         replicator_in_port0: endpoint {
 282                                                 slave-mode;
 283                                                 remote-endpoint = <&etf_out_port>;
 284                                         };
 285                                 };
 286                         };
 287                 };
 288
 289                 intc: interrupt-controller@31001000 {
 290                         compatible = "arm,cortex-a7-gic";
 291                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 292                         #interrupt-cells = <3>;
 293                         interrupt-controller;
 294                         reg = <0x31001000 0x1000>,
 295                               <0x31002000 0x2000>,
 296                               <0x31004000 0x2000>,
 297                               <0x31006000 0x2000>;
 298                 };
 299
 300                 timer {
 301                         compatible = "arm,armv7-timer";
 302                         interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 303                                      <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 304                                      <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 305                                      <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 306                 };
 307
 308                 aips1: aips-bus@30000000 {
 309                         compatible = "fsl,aips-bus", "simple-bus";
 310                         #address-cells = <1>;
 311                         #size-cells = <1>;
 312                         reg = <0x30000000 0x400000>;
 313                         ranges;
 314
 315                         gpio1: gpio@30200000 {
 316                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 317                                 reg = <0x30200000 0x10000>;
 318                                 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
 319                                              <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
 320                                 gpio-controller;
 321                                 #gpio-cells = <2>;
 322                                 interrupt-controller;
 323                                 #interrupt-cells = <2>;
 324                                 gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
 325                         };
 326
 327                         gpio2: gpio@30210000 {
 328                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 329                                 reg = <0x30210000 0x10000>;
 330                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 331                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 332                                 gpio-controller;
 333                                 #gpio-cells = <2>;
 334                                 interrupt-controller;
 335                                 #interrupt-cells = <2>;
 336                                 gpio-ranges = <&iomuxc 0 13 32>;
 337                         };
 338
 339                         gpio3: gpio@30220000 {
 340                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 341                                 reg = <0x30220000 0x10000>;
 342                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 343                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 344                                 gpio-controller;
 345                                 #gpio-cells = <2>;
 346                                 interrupt-controller;
 347                                 #interrupt-cells = <2>;
 348                                 gpio-ranges = <&iomuxc 0 45 29>;
 349                         };
 350
 351                         gpio4: gpio@30230000 {
 352                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 353                                 reg = <0x30230000 0x10000>;
 354                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 355                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 356                                 gpio-controller;
 357                                 #gpio-cells = <2>;
 358                                 interrupt-controller;
 359                                 #interrupt-cells = <2>;
 360                                 gpio-ranges = <&iomuxc 0 74 24>;
 361                         };
 362
 363                         gpio5: gpio@30240000 {
 364                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 365                                 reg = <0x30240000 0x10000>;
 366                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 367                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 368                                 gpio-controller;
 369                                 #gpio-cells = <2>;
 370                                 interrupt-controller;
 371                                 #interrupt-cells = <2>;
 372                                 gpio-ranges = <&iomuxc 0 98 18>;
 373                         };
 374
 375                         gpio6: gpio@30250000 {
 376                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 377                                 reg = <0x30250000 0x10000>;
 378                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 379                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 380                                 gpio-controller;
 381                                 #gpio-cells = <2>;
 382                                 interrupt-controller;
 383                                 #interrupt-cells = <2>;
 384                                 gpio-ranges = <&iomuxc 0 116 23>;
 385                         };
 386
 387                         gpio7: gpio@30260000 {
 388                                 compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
 389                                 reg = <0x30260000 0x10000>;
 390                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 391                                              <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 392                                 gpio-controller;
 393                                 #gpio-cells = <2>;
 394                                 interrupt-controller;
 395                                 #interrupt-cells = <2>;
 396                                 gpio-ranges = <&iomuxc 0 139 16>;
 397                         };
 398
 399                         wdog1: wdog@30280000 {
 400                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 401                                 reg = <0x30280000 0x10000>;
 402                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 403                                 clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
 404                         };
 405
 406                         wdog2: wdog@30290000 {
 407                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 408                                 reg = <0x30290000 0x10000>;
 409                                 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 410                                 clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
 411                                 status = "disabled";
 412                         };
 413
 414                         wdog3: wdog@302a0000 {
 415                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 416                                 reg = <0x302a0000 0x10000>;
 417                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 418                                 clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
 419                                 status = "disabled";
 420                         };
 421
 422                         wdog4: wdog@302b0000 {
 423                                 compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
 424                                 reg = <0x302b0000 0x10000>;
 425                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 426                                 clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
 427                                 status = "disabled";
 428                         };
 429
 430                         iomuxc_lpsr: iomuxc-lpsr@302c0000 {
 431                                 compatible = "fsl,imx7d-iomuxc-lpsr";
 432                                 reg = <0x302c0000 0x10000>;
 433                                 fsl,input-sel = <&iomuxc>;
 434                         };
 435
 436                         gpt1: gpt@302d0000 {
 437                                 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 438                                 reg = <0x302d0000 0x10000>;
 439                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 440                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 441                                          <&clks IMX7D_GPT1_ROOT_CLK>;
 442                                 clock-names = "ipg", "per";
 443                         };
 444
 445                         gpt2: gpt@302e0000 {
 446                                 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 447                                 reg = <0x302e0000 0x10000>;
 448                                 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 449                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 450                                          <&clks IMX7D_GPT2_ROOT_CLK>;
 451                                 clock-names = "ipg", "per";
 452                                 status = "disabled";
 453                         };
 454
 455                         gpt3: gpt@302f0000 {
 456                                 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 457                                 reg = <0x302f0000 0x10000>;
 458                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 459                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 460                                          <&clks IMX7D_GPT3_ROOT_CLK>;
 461                                 clock-names = "ipg", "per";
 462                                 status = "disabled";
 463                         };
 464
 465                         gpt4: gpt@30300000 {
 466                                 compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 467                                 reg = <0x30300000 0x10000>;
 468                                 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 469                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 470                                          <&clks IMX7D_GPT4_ROOT_CLK>;
 471                                 clock-names = "ipg", "per";
 472                                 status = "disabled";
 473                         };
 474
 475                         iomuxc: iomuxc@30330000 {
 476                                 compatible = "fsl,imx7d-iomuxc";
 477                                 reg = <0x30330000 0x10000>;
 478                         };
 479
 480                         gpr: iomuxc-gpr@30340000 {
 481                                 compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
 482                                 reg = <0x30340000 0x10000>;
 483                         };
 484
 485                         ocotp: ocotp-ctrl@30350000 {
 486                                 compatible = "syscon";
 487                                 reg = <0x30350000 0x10000>;
 488                                 clocks = <&clks IMX7D_CLK_DUMMY>;
 489                                 status = "disabled";
 490                         };
 491
 492                         anatop: anatop@30360000 {
 493                                 compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
 494                                         "syscon", "simple-bus";
 495                                 reg = <0x30360000 0x10000>;
 496                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 497                                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 498
 499                                 reg_1p0d: regulator-vdd1p0d {
 500                                         compatible = "fsl,anatop-regulator";
 501                                         regulator-name = "vdd1p0d";
 502                                         regulator-min-microvolt = <800000>;
 503                                         regulator-max-microvolt = <1200000>;
 504                                         anatop-reg-offset = <0x210>;
 505                                         anatop-vol-bit-shift = <8>;
 506                                         anatop-vol-bit-width = <5>;
 507                                         anatop-min-bit-val = <8>;
 508                                         anatop-min-voltage = <800000>;
 509                                         anatop-max-voltage = <1200000>;
 510                                         anatop-enable-bit = <31>;
 511                                 };
 512                         };
 513
 514                         snvs: snvs@30370000 {
 515                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 516                                 reg = <0x30370000 0x10000>;
 517
 518                                 snvs_rtc: snvs-rtc-lp {
 519                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 520                                         regmap = <&snvs>;
 521                                         offset = <0x34>;
 522                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 523                                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 524                                 };
 525
 526                                 snvs_poweroff: snvs-poweroff {
 527                                         compatible = "syscon-poweroff";
 528                                         regmap = <&snvs>;
 529                                         offset = <0x38>;
 530                                         mask = <0x60>;
 531                                 };
 532
 533                                 snvs_pwrkey: snvs-powerkey {
 534                                         compatible = "fsl,sec-v4.0-pwrkey";
 535                                         regmap = <&snvs>;
 536                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 537                                         linux,keycode = <KEY_POWER>;
 538                                         wakeup-source;
 539                                 };
 540                         };
 541
 542                         clks: ccm@30380000 {
 543                                 compatible = "fsl,imx7d-ccm";
 544                                 reg = <0x30380000 0x10000>;
 545                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 546                                              <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 547                                 #clock-cells = <1>;
 548                                 clocks = <&ckil>, <&osc>;
 549                                 clock-names = "ckil", "osc";
 550                         };
 551
 552                         src: src@30390000 {
 553                                 compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
 554                                 reg = <0x30390000 0x10000>;
 555                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 556                                 #reset-cells = <1>;
 557                         };
 558                 };
 559
 560                 aips2: aips-bus@30400000 {
 561                         compatible = "fsl,aips-bus", "simple-bus";
 562                         #address-cells = <1>;
 563                         #size-cells = <1>;
 564                         reg = <0x30400000 0x400000>;
 565                         ranges;
 566
 567                         adc1: adc@30610000 {
 568                                 compatible = "fsl,imx7d-adc";
 569                                 reg = <0x30610000 0x10000>;
 570                                 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 571                                 clocks = <&clks IMX7D_ADC_ROOT_CLK>;
 572                                 clock-names = "adc";
 573                                 status = "disabled";
 574                         };
 575
 576                         adc2: adc@30620000 {
 577                                 compatible = "fsl,imx7d-adc";
 578                                 reg = <0x30620000 0x10000>;
 579                                 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 580                                 clocks = <&clks IMX7D_ADC_ROOT_CLK>;
 581                                 clock-names = "adc";
 582                                 status = "disabled";
 583                         };
 584
 585                         ecspi4: ecspi@30630000 {
 586                                 #address-cells = <1>;
 587                                 #size-cells = <0>;
 588                                 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
 589                                 reg = <0x30630000 0x10000>;
 590                                 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 591                                 clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
 592                                         <&clks IMX7D_ECSPI4_ROOT_CLK>;
 593                                 clock-names = "ipg", "per";
 594                                 status = "disabled";
 595                         };
 596
 597                         pwm1: pwm@30660000 {
 598                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 599                                 reg = <0x30660000 0x10000>;
 600                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 601                                 clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
 602                                          <&clks IMX7D_PWM1_ROOT_CLK>;
 603                                 clock-names = "ipg", "per";
 604                                 #pwm-cells = <2>;
 605                                 status = "disabled";
 606                         };
 607
 608                         pwm2: pwm@30670000 {
 609                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 610                                 reg = <0x30670000 0x10000>;
 611                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 612                                 clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
 613                                          <&clks IMX7D_PWM2_ROOT_CLK>;
 614                                 clock-names = "ipg", "per";
 615                                 #pwm-cells = <2>;
 616                                 status = "disabled";
 617                         };
 618
 619                         pwm3: pwm@30680000 {
 620                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 621                                 reg = <0x30680000 0x10000>;
 622                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 623                                 clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
 624                                          <&clks IMX7D_PWM3_ROOT_CLK>;
 625                                 clock-names = "ipg", "per";
 626                                 #pwm-cells = <2>;
 627                                 status = "disabled";
 628                         };
 629
 630                         pwm4: pwm@30690000 {
 631                                 compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 632                                 reg = <0x30690000 0x10000>;
 633                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 634                                 clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
 635                                          <&clks IMX7D_PWM4_ROOT_CLK>;
 636                                 clock-names = "ipg", "per";
 637                                 #pwm-cells = <2>;
 638                                 status = "disabled";
 639                         };
 640
 641                         lcdif: lcdif@30730000 {
 642                                 compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
 643                                 reg = <0x30730000 0x10000>;
 644                                 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 645                                 clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
 646                                         <&clks IMX7D_CLK_DUMMY>,
 647                                         <&clks IMX7D_CLK_DUMMY>;
 648                                 clock-names = "pix", "axi", "disp_axi";
 649                                 status = "disabled";
 650                         };
 651                 };
 652
 653                 aips3: aips-bus@30800000 {
 654                         compatible = "fsl,aips-bus", "simple-bus";
 655                         #address-cells = <1>;
 656                         #size-cells = <1>;
 657                         reg = <0x30800000 0x400000>;
 658                         ranges;
 659
 660                         ecspi1: ecspi@30820000 {
 661                                 #address-cells = <1>;
 662                                 #size-cells = <0>;
 663                                 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
 664                                 reg = <0x30820000 0x10000>;
 665                                 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 666                                 clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
 667                                         <&clks IMX7D_ECSPI1_ROOT_CLK>;
 668                                 clock-names = "ipg", "per";
 669                                 status = "disabled";
 670                         };
 671
 672                         ecspi2: ecspi@30830000 {
 673                                 #address-cells = <1>;
 674                                 #size-cells = <0>;
 675                                 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
 676                                 reg = <0x30830000 0x10000>;
 677                                 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 678                                 clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
 679                                         <&clks IMX7D_ECSPI2_ROOT_CLK>;
 680                                 clock-names = "ipg", "per";
 681                                 status = "disabled";
 682                         };
 683
 684                         ecspi3: ecspi@30840000 {
 685                                 #address-cells = <1>;
 686                                 #size-cells = <0>;
 687                                 compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
 688                                 reg = <0x30840000 0x10000>;
 689                                 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 690                                 clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
 691                                         <&clks IMX7D_ECSPI3_ROOT_CLK>;
 692                                 clock-names = "ipg", "per";
 693                                 status = "disabled";
 694                         };
 695
 696                         uart1: serial@30860000 {
 697                                 compatible = "fsl,imx7d-uart",
 698                                              "fsl,imx6q-uart";
 699                                 reg = <0x30860000 0x10000>;
 700                                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 701                                 clocks = <&clks IMX7D_UART1_ROOT_CLK>,
 702                                         <&clks IMX7D_UART1_ROOT_CLK>;
 703                                 clock-names = "ipg", "per";
 704                                 status = "disabled";
 705                         };
 706
 707                         uart2: serial@30890000 {
 708                                 compatible = "fsl,imx7d-uart",
 709                                              "fsl,imx6q-uart";
 710                                 reg = <0x30890000 0x10000>;
 711                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 712                                 clocks = <&clks IMX7D_UART2_ROOT_CLK>,
 713                                         <&clks IMX7D_UART2_ROOT_CLK>;
 714                                 clock-names = "ipg", "per";
 715                                 status = "disabled";
 716                         };
 717
 718                         uart3: serial@30880000 {
 719                                 compatible = "fsl,imx7d-uart",
 720                                              "fsl,imx6q-uart";
 721                                 reg = <0x30880000 0x10000>;
 722                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 723                                 clocks = <&clks IMX7D_UART3_ROOT_CLK>,
 724                                         <&clks IMX7D_UART3_ROOT_CLK>;
 725                                 clock-names = "ipg", "per";
 726                                 status = "disabled";
 727                         };
 728
 729                         sai1: sai@308a0000 {
 730                                 #sound-dai-cells = <0>;
 731                                 compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
 732                                 reg = <0x308a0000 0x10000>;
 733                                 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 734                                 clocks = <&clks IMX7D_SAI1_IPG_CLK>,
 735                                          <&clks IMX7D_SAI1_ROOT_CLK>,
 736                                          <&clks IMX7D_CLK_DUMMY>,
 737                                          <&clks IMX7D_CLK_DUMMY>;
 738                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 739                                 dma-names = "rx", "tx";
 740                                 dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
 741                                 status = "disabled";
 742                         };
 743
 744                         sai2: sai@308b0000 {
 745                                 #sound-dai-cells = <0>;
 746                                 compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
 747                                 reg = <0x308b0000 0x10000>;
 748                                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 749                                 clocks = <&clks IMX7D_SAI2_IPG_CLK>,
 750                                          <&clks IMX7D_SAI2_ROOT_CLK>,
 751                                          <&clks IMX7D_CLK_DUMMY>,
 752                                          <&clks IMX7D_CLK_DUMMY>;
 753                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 754                                 dma-names = "rx", "tx";
 755                                 dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
 756                                 status = "disabled";
 757                         };
 758
 759                         sai3: sai@308c0000 {
 760                                 #sound-dai-cells = <0>;
 761                                 compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
 762                                 reg = <0x308c0000 0x10000>;
 763                                 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 764                                 clocks = <&clks IMX7D_SAI3_IPG_CLK>,
 765                                          <&clks IMX7D_SAI3_ROOT_CLK>,
 766                                          <&clks IMX7D_CLK_DUMMY>,
 767                                          <&clks IMX7D_CLK_DUMMY>;
 768                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 769                                 dma-names = "rx", "tx";
 770                                 dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
 771                                 status = "disabled";
 772                         };
 773
 774                         flexcan1: can@30a00000 {
 775                                 compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
 776                                 reg = <0x30a00000 0x10000>;
 777                                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 778                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 779                                         <&clks IMX7D_CAN1_ROOT_CLK>;
 780                                 clock-names = "ipg", "per";
 781                                 status = "disabled";
 782                         };
 783
 784                         flexcan2: can@30a10000 {
 785                                 compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
 786                                 reg = <0x30a10000 0x10000>;
 787                                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 788                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 789                                         <&clks IMX7D_CAN2_ROOT_CLK>;
 790                                 clock-names = "ipg", "per";
 791                                 status = "disabled";
 792                         };
 793
 794                         i2c1: i2c@30a20000 {
 795                                 #address-cells = <1>;
 796                                 #size-cells = <0>;
 797                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
 798                                 reg = <0x30a20000 0x10000>;
 799                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 800                                 clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
 801                                 status = "disabled";
 802                         };
 803
 804                         i2c2: i2c@30a30000 {
 805                                 #address-cells = <1>;
 806                                 #size-cells = <0>;
 807                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
 808                                 reg = <0x30a30000 0x10000>;
 809                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 810                                 clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
 811                                 status = "disabled";
 812                         };
 813
 814                         i2c3: i2c@30a40000 {
 815                                 #address-cells = <1>;
 816                                 #size-cells = <0>;
 817                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
 818                                 reg = <0x30a40000 0x10000>;
 819                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 820                                 clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
 821                                 status = "disabled";
 822                         };
 823
 824                         i2c4: i2c@30a50000 {
 825                                 #address-cells = <1>;
 826                                 #size-cells = <0>;
 827                                 compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
 828                                 reg = <0x30a50000 0x10000>;
 829                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 830                                 clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
 831                                 status = "disabled";
 832                         };
 833
 834                         uart4: serial@30a60000 {
 835                                 compatible = "fsl,imx7d-uart",
 836                                              "fsl,imx6q-uart";
 837                                 reg = <0x30a60000 0x10000>;
 838                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 839                                 clocks = <&clks IMX7D_UART4_ROOT_CLK>,
 840                                         <&clks IMX7D_UART4_ROOT_CLK>;
 841                                 clock-names = "ipg", "per";
 842                                 status = "disabled";
 843                         };
 844
 845                         uart5: serial@30a70000 {
 846                                 compatible = "fsl,imx7d-uart",
 847                                              "fsl,imx6q-uart";
 848                                 reg = <0x30a70000 0x10000>;
 849                                 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 850                                 clocks = <&clks IMX7D_UART5_ROOT_CLK>,
 851                                         <&clks IMX7D_UART5_ROOT_CLK>;
 852                                 clock-names = "ipg", "per";
 853                                 status = "disabled";
 854                         };
 855
 856                         uart6: serial@30a80000 {
 857                                 compatible = "fsl,imx7d-uart",
 858                                              "fsl,imx6q-uart";
 859                                 reg = <0x30a80000 0x10000>;
 860                                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 861                                 clocks = <&clks IMX7D_UART6_ROOT_CLK>,
 862                                         <&clks IMX7D_UART6_ROOT_CLK>;
 863                                 clock-names = "ipg", "per";
 864                                 status = "disabled";
 865                         };
 866
 867                         uart7: serial@30a90000 {
 868                                 compatible = "fsl,imx7d-uart",
 869                                              "fsl,imx6q-uart";
 870                                 reg = <0x30a90000 0x10000>;
 871                                 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 872                                 clocks = <&clks IMX7D_UART7_ROOT_CLK>,
 873                                         <&clks IMX7D_UART7_ROOT_CLK>;
 874                                 clock-names = "ipg", "per";
 875                                 status = "disabled";
 876                         };
 877
 878                         usbotg1: usb@30b10000 {
 879                                 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 880                                 reg = <0x30b10000 0x200>;
 881                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 882                                 clocks = <&clks IMX7D_USB_CTRL_CLK>;
 883                                 fsl,usbphy = <&usbphynop1>;
 884                                 fsl,usbmisc = <&usbmisc1 0>;
 885                                 phy-clkgate-delay-us = <400>;
 886                                 status = "disabled";
 887                         };
 888
 889                         usbh: usb@30b30000 {
 890                                 compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 891                                 reg = <0x30b30000 0x200>;
 892                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 893                                 clocks = <&clks IMX7D_USB_CTRL_CLK>;
 894                                 fsl,usbphy = <&usbphynop3>;
 895                                 fsl,usbmisc = <&usbmisc3 0>;
 896                                 phy_type = "hsic";
 897                                 dr_mode = "host";
 898                                 phy-clkgate-delay-us = <400>;
 899                                 status = "disabled";
 900                         };
 901
 902                         usbmisc1: usbmisc@30b10200 {
 903                                 #index-cells = <1>;
 904                                 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
 905                                 reg = <0x30b10200 0x200>;
 906                         };
 907
 908                         usbmisc3: usbmisc@30b30200 {
 909                                 #index-cells = <1>;
 910                                 compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
 911                                 reg = <0x30b30200 0x200>;
 912                         };
 913
 914                         usbphynop1: usbphynop1 {
 915                                 compatible = "usb-nop-xceiv";
 916                                 clocks = <&clks IMX7D_USB_PHY1_CLK>;
 917                                 clock-names = "main_clk";
 918                         };
 919
 920                         usbphynop3: usbphynop3 {
 921                                 compatible = "usb-nop-xceiv";
 922                                 clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 923                                 clock-names = "main_clk";
 924                         };
 925
 926                         usdhc1: usdhc@30b40000 {
 927                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 928                                 reg = <0x30b40000 0x10000>;
 929                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 930                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 931                                         <&clks IMX7D_CLK_DUMMY>,
 932                                         <&clks IMX7D_USDHC1_ROOT_CLK>;
 933                                 clock-names = "ipg", "ahb", "per";
 934                                 bus-width = <4>;
 935                                 status = "disabled";
 936                         };
 937
 938                         usdhc2: usdhc@30b50000 {
 939                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 940                                 reg = <0x30b50000 0x10000>;
 941                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 942                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 943                                         <&clks IMX7D_CLK_DUMMY>,
 944                                         <&clks IMX7D_USDHC2_ROOT_CLK>;
 945                                 clock-names = "ipg", "ahb", "per";
 946                                 bus-width = <4>;
 947                                 status = "disabled";
 948                         };
 949
 950                         usdhc3: usdhc@30b60000 {
 951                                 compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 952                                 reg = <0x30b60000 0x10000>;
 953                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 954                                 clocks = <&clks IMX7D_CLK_DUMMY>,
 955                                         <&clks IMX7D_CLK_DUMMY>,
 956                                         <&clks IMX7D_USDHC3_ROOT_CLK>;
 957                                 clock-names = "ipg", "ahb", "per";
 958                                 bus-width = <4>;
 959                                 status = "disabled";
 960                         };
 961
 962                         sdma: sdma@30bd0000 {
 963                                 compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
 964                                 reg = <0x30bd0000 0x10000>;
 965                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 966                                 clocks = <&clks IMX7D_SDMA_CORE_CLK>,
 967                                          <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
 968                                 clock-names = "ipg", "ahb";
 969                                 #dma-cells = <3>;
 970                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
 971                         };
 972
 973                         fec1: ethernet@30be0000 {
 974                                 compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
 975                                 reg = <0x30be0000 0x10000>;
 976                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 977                                         <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
 978                                         <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 979                                 clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 980                                         <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 981                                         <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
 982                                         <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
 983                                         <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
 984                                 clock-names = "ipg", "ahb", "ptp",
 985                                         "enet_clk_ref", "enet_out";
 986                                 fsl,num-tx-queues=<3>;
 987                                 fsl,num-rx-queues=<3>;
 988                                 status = "disabled";
 989                         };
 990                 };
 991         };
 992 };