arch/arm/boot/dts/omap3-evm-37xx.dts

   1 /*
   2  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "omap36xx.dtsi"
  11 #include "omap3-evm-common.dtsi"
  12
  13
  14 / {
  15         model = "TI OMAP37XX EVM (TMDSEVM3730)";
  16         compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
  17
  18         memory@80000000 {
  19                 device_type = "memory";
  20                 reg = <0x80000000 0x10000000>; /* 256 MB */
  21         };
  22
  23         wl12xx_vmmc: wl12xx_vmmc {
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&wl12xx_gpio>;
  26         };
  27 };
  28
  29 &dss {
  30         pinctrl-names = "default";
  31         pinctrl-0 = <
  32                 &dss_dpi_pins1
  33                 &dss_dpi_pins2
  34         >;
  35 };
  36
  37 &omap3_pmx_core {
  38         dss_dpi_pins1: pinmux_dss_dpi_pins2 {
  39                 pinctrl-single,pins = <
  40                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
  41                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
  42                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
  43                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
  44
  45                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
  46                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
  47                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
  48                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
  49                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
  50                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
  51                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
  52                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
  53                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
  54                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
  55                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
  56                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
  57
  58                         OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
  59                         OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
  60                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
  61                         OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
  62                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
  63                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
  64                 >;
  65         };
  66
  67         mmc1_pins: pinmux_mmc1_pins {
  68                 pinctrl-single,pins = <
  69                         OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* sdmmc1_clk.sdmmc1_clk */
  70                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
  71                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat0.sdmmc1_dat0 */
  72                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat1.sdmmc1_dat1 */
  73                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat2.sdmmc1_dat2 */
  74                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat3.sdmmc1_dat3 */
  75                         OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat4.sdmmc1_dat4 */
  76                         OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat5.sdmmc1_dat5 */
  77                         OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat6.sdmmc1_dat6 */
  78                         OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat7.sdmmc1_dat7 */
  79                 >;
  80         };
  81
  82         /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
  83         mmc2_pins: pinmux_mmc2_pins {
  84                 pinctrl-single,pins = <
  85                         OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
  86                         OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
  87                         OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
  88                         OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
  89                         OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
  90                         OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
  91                 >;
  92         };
  93
  94         uart3_pins: pinmux_uart3_pins {
  95                 pinctrl-single,pins = <
  96                         OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
  97                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)               /* uart3_tx_irtx.uart3_tx_irtx */
  98                 >;
  99         };
 100
 101         wl12xx_gpio: pinmux_wl12xx_gpio {
 102                 pinctrl-single,pins = <
 103                         OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)               /* uart1_cts.gpio_150 */
 104                         OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)                /* uart1_rts.gpio_149 */
 105                 >;
 106         };
 107
 108         smsc911x_pins: pinmux_smsc911x_pins {
 109                 pinctrl-single,pins = <
 110                         OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)                /* mcspi1_cs2.gpio_176 */
 111                 >;
 112         };
 113 };
 114
 115 &omap3_pmx_wkup {
 116         dss_dpi_pins2: pinmux_dss_dpi_pins1 {
 117                 pinctrl-single,pins = <
 118                         OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
 119                         OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
 120                         OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
 121                         OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
 122                         OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
 123                         OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
 124                 >;
 125         };
 126 };
 127
 128 &mmc1 {
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&mmc1_pins>;
 131 };
 132
 133 &mmc2 {
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&mmc2_pins>;
 136 };
 137
 138 &mmc3 {
 139         status = "disabled";
 140 };
 141
 142 &uart1 {
 143         interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
 144 };
 145
 146 &uart2 {
 147         interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 148 };
 149
 150 &uart3 {
 151         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 152         pinctrl-names = "default";
 153         pinctrl-0 = <&uart3_pins>;
 154 };
 155
 156 &gpmc {
 157         ranges = <0 0 0x30000000 0x1000000>,    /* CS0: 16MB for NAND */
 158                  <5 0 0x2c000000 0x01000000>;
 159
 160         nand@0,0 {
 161                 compatible = "ti,omap2-nand";
 162                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 163                 interrupt-parent = <&gpmc>;
 164                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 165                              <1 IRQ_TYPE_NONE>; /* termcount */
 166                 linux,mtd-name= "hynix,h8kds0un0mer-4em";
 167                 nand-bus-width = <16>;
 168                 gpmc,device-width = <2>;
 169                 ti,nand-ecc-opt = "bch8";
 170
 171                 gpmc,sync-clk-ps = <0>;
 172                 gpmc,cs-on-ns = <0>;
 173                 gpmc,cs-rd-off-ns = <44>;
 174                 gpmc,cs-wr-off-ns = <44>;
 175                 gpmc,adv-on-ns = <6>;
 176                 gpmc,adv-rd-off-ns = <34>;
 177                 gpmc,adv-wr-off-ns = <44>;
 178                 gpmc,we-off-ns = <40>;
 179                 gpmc,oe-off-ns = <54>;
 180                 gpmc,access-ns = <64>;
 181                 gpmc,rd-cycle-ns = <82>;
 182                 gpmc,wr-cycle-ns = <82>;
 183                 gpmc,wr-access-ns = <40>;
 184                 gpmc,wr-data-mux-bus-ns = <0>;
 185
 186                 #address-cells = <1>;
 187                 #size-cells = <1>;
 188
 189                 partition@0 {
 190                         label = "X-Loader";
 191                         reg = <0 0x80000>;
 192                 };
 193                 partition@0x80000 {
 194                         label = "U-Boot";
 195                         reg = <0x80000 0x1c0000>;
 196                 };
 197                 partition@0x1c0000 {
 198                         label = "Environment";
 199                         reg = <0x240000 0x40000>;
 200                 };
 201                 partition@0x280000 {
 202                         label = "Kernel";
 203                         reg = <0x280000 0x500000>;
 204                 };
 205                 partition@0x780000 {
 206                         label = "Filesystem";
 207                         reg = <0x780000 0x1f880000>;
 208                 };
 209         };
 210
 211         ethernet@gpmc {
 212                 pinctrl-names = "default";
 213                 pinctrl-0 = <&smsc911x_pins>;
 214         };
 215 };