arch/arm/boot/dts/omap5-board-common.dtsi

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 #include "omap5.dtsi"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11
  12 / {
  13         aliases {
  14                 display0 = &hdmi0;
  15         };
  16
  17         vmain: fixedregulator-vmain {
  18                 compatible = "regulator-fixed";
  19                 regulator-name = "vmain";
  20                 regulator-min-microvolt = <5000000>;
  21                 regulator-max-microvolt = <5000000>;
  22         };
  23
  24         vsys_cobra: fixedregulator-vsys_cobra {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "vsys_cobra";
  27                 vin-supply = <&vmain>;
  28                 regulator-min-microvolt = <5000000>;
  29                 regulator-max-microvolt = <5000000>;
  30         };
  31
  32         vdds_1v8_main: fixedregulator-vdds_1v8_main {
  33                 compatible = "regulator-fixed";
  34                 regulator-name = "vdds_1v8_main";
  35                 vin-supply = <&smps7_reg>;
  36                 regulator-min-microvolt = <1800000>;
  37                 regulator-max-microvolt = <1800000>;
  38         };
  39
  40         vmmcsd_fixed: fixedregulator-mmcsd {
  41                 compatible = "regulator-fixed";
  42                 regulator-name = "vmmcsd_fixed";
  43                 regulator-min-microvolt = <3000000>;
  44                 regulator-max-microvolt = <3000000>;
  45         };
  46
  47         mmc3_pwrseq: sdhci0_pwrseq {
  48                 compatible = "mmc-pwrseq-simple";
  49                 clocks = <&clk32kgaudio>;
  50                 clock-names = "ext_clock";
  51         };
  52
  53         vmmcsdio_fixed: fixedregulator-mmcsdio {
  54                 compatible = "regulator-fixed";
  55                 regulator-name = "vmmcsdio_fixed";
  56                 regulator-min-microvolt = <1800000>;
  57                 regulator-max-microvolt = <1800000>;
  58                 gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;    /* gpio140 WLAN_EN */
  59                 enable-active-high;
  60                 startup-delay-us = <70000>;
  61                 pinctrl-names = "default";
  62                 pinctrl-0 = <&wlan_pins>;
  63         };
  64
  65         /* HS USB Host PHY on PORT 2 */
  66         hsusb2_phy: hsusb2_phy {
  67                 compatible = "usb-nop-xceiv";
  68                 reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
  69                 clocks = <&auxclk1_ck>;
  70                 clock-names = "main_clk";
  71                 clock-frequency = <19200000>;
  72         };
  73
  74         /* HS USB Host PHY on PORT 3 */
  75         hsusb3_phy: hsusb3_phy {
  76                 compatible = "usb-nop-xceiv";
  77                 reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
  78         };
  79
  80         tpd12s015: encoder {
  81                 compatible = "ti,tpd12s015";
  82
  83                 pinctrl-names = "default";
  84                 pinctrl-0 = <&tpd12s015_pins>;
  85
  86                 /* gpios defined in the board specific dts */
  87
  88                 ports {
  89                         #address-cells = <1>;
  90                         #size-cells = <0>;
  91
  92                         port@0 {
  93                                 reg = <0>;
  94
  95                                 tpd12s015_in: endpoint {
  96                                         remote-endpoint = <&hdmi_out>;
  97                                 };
  98                         };
  99
 100                         port@1 {
 101                                 reg = <1>;
 102
 103                                 tpd12s015_out: endpoint {
 104                                         remote-endpoint = <&hdmi_connector_in>;
 105                                 };
 106                         };
 107                 };
 108         };
 109
 110         hdmi0: connector {
 111                 compatible = "hdmi-connector";
 112                 label = "hdmi";
 113
 114                 type = "b";
 115
 116                 port {
 117                         hdmi_connector_in: endpoint {
 118                                 remote-endpoint = <&tpd12s015_out>;
 119                         };
 120                 };
 121         };
 122
 123         sound: sound {
 124                 compatible = "ti,abe-twl6040";
 125                 ti,model = "omap5-uevm";
 126
 127                 ti,mclk-freq = <19200000>;
 128
 129                 ti,mcpdm = <&mcpdm>;
 130
 131                 ti,twl6040 = <&twl6040>;
 132
 133                 /* Audio routing */
 134                 ti,audio-routing =
 135                         "Headset Stereophone", "HSOL",
 136                         "Headset Stereophone", "HSOR",
 137                         "Line Out", "AUXL",
 138                         "Line Out", "AUXR",
 139                         "HSMIC", "Headset Mic",
 140                         "Headset Mic", "Headset Mic Bias",
 141                         "AFML", "Line In",
 142                         "AFMR", "Line In";
 143         };
 144 };
 145
 146 &gpio8 {
 147         /* TI trees use GPIO instead of msecure, see also muxing */
 148         p234 {
 149                 gpio-hog;
 150                 gpios = <10 GPIO_ACTIVE_HIGH>;
 151                 output-high;
 152                 line-name = "gpio8_234/msecure";
 153         };
 154 };
 155
 156 &omap5_pmx_core {
 157         pinctrl-names = "default";
 158         pinctrl-0 = <
 159                         &usbhost_pins
 160                         &led_gpio_pins
 161         >;
 162
 163         twl6040_pins: pinmux_twl6040_pins {
 164                 pinctrl-single,pins = <
 165                         OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)      /* mcspi1_somi.gpio5_141 */
 166                 >;
 167         };
 168
 169         mcpdm_pins: pinmux_mcpdm_pins {
 170                 pinctrl-single,pins = <
 171                         OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_clks.abe_clks */
 172                         OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_ul_data.abemcpdm_ul_data */
 173                         OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_dl_data.abemcpdm_dl_data */
 174                         OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)        /* abemcpdm_frame.abemcpdm_frame */
 175                         OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_lb_clk.abemcpdm_lb_clk */
 176                 >;
 177         };
 178
 179         mcbsp1_pins: pinmux_mcbsp1_pins {
 180                 pinctrl-single,pins = <
 181                         OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)               /* abedmic_clk2.abemcbsp1_fsx */
 182                         OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)     /* abedmic_clk3.abemcbsp1_dx */
 183                         OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)               /* abeslimbus1_clock.abemcbsp1_clkx */
 184                         OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* abeslimbus1_data.abemcbsp1_dr */
 185                 >;
 186         };
 187
 188         mcbsp2_pins: pinmux_mcbsp2_pins {
 189                 pinctrl-single,pins = <
 190                         OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcbsp2_dr.abemcbsp2_dr */
 191                         OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)     /* abemcbsp2_dx.abemcbsp2_dx */
 192                         OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)               /* abemcbsp2_fsx.abemcbsp2_fsx */
 193                         OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)               /* abemcbsp2_clkx.abemcbsp2_clkx */
 194                 >;
 195         };
 196
 197         i2c1_pins: pinmux_i2c1_pins {
 198                 pinctrl-single,pins = <
 199                         OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_scl */
 200                         OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_sda */
 201                 >;
 202         };
 203
 204         mcspi2_pins: pinmux_mcspi2_pins {
 205                 pinctrl-single,pins = <
 206                         OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)               /*  mcspi2_clk */
 207                         OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)               /*  mcspi2_simo */
 208                         OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)        /*  mcspi2_somi */
 209                         OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)              /*  mcspi2_cs0 */
 210                 >;
 211         };
 212
 213         mcspi3_pins: pinmux_mcspi3_pins {
 214                 pinctrl-single,pins = <
 215                         OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)               /*  mcspi3_somi */
 216                         OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)               /*  mcspi3_cs0 */
 217                         OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)               /*  mcspi3_simo */
 218                         OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)               /*  mcspi3_clk */
 219                 >;
 220         };
 221
 222         mmc3_pins: pinmux_mmc3_pins {
 223                 pinctrl-single,pins = <
 224                         OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
 225                         OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
 226                         OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
 227                         OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
 228                         OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
 229                         OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
 230                 >;
 231         };
 232
 233         wlan_pins: pinmux_wlan_pins {
 234                 pinctrl-single,pins = <
 235                         OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
 236                 >;
 237         };
 238
 239         /* TI trees use GPIO mode; msecure mode does not work reliably? */
 240         palmas_msecure_pins: palmas_msecure_pins {
 241                 pinctrl-single,pins = <
 242                         OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
 243                 >;
 244         };
 245
 246         usbhost_pins: pinmux_usbhost_pins {
 247                 pinctrl-single,pins = <
 248                         OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
 249                         OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
 250
 251                         OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
 252                         OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
 253
 254                         OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
 255                         OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
 256                 >;
 257         };
 258
 259         led_gpio_pins: pinmux_led_gpio_pins {
 260                 pinctrl-single,pins = <
 261                         OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
 262                 >;
 263         };
 264
 265         uart1_pins: pinmux_uart1_pins {
 266                 pinctrl-single,pins = <
 267                         OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
 268                         OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
 269                         OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
 270                         OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
 271                 >;
 272         };
 273
 274         uart3_pins: pinmux_uart3_pins {
 275                 pinctrl-single,pins = <
 276                         OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
 277                         OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
 278                 >;
 279         };
 280
 281         uart5_pins: pinmux_uart5_pins {
 282                 pinctrl-single,pins = <
 283                         OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
 284                         OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
 285                         OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
 286                         OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
 287                 >;
 288         };
 289
 290         dss_hdmi_pins: pinmux_dss_hdmi_pins {
 291                 pinctrl-single,pins = <
 292                         OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0)        /* hdmi_cec.hdmi_cec */
 293                         OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)       /* hdmi_ddc_scl.hdmi_ddc_scl */
 294                         OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)       /* hdmi_ddc_sda.hdmi_ddc_sda */
 295                 >;
 296         };
 297
 298         tpd12s015_pins: pinmux_tpd12s015_pins {
 299                 pinctrl-single,pins = <
 300                         OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)      /* hdmi_hpd.gpio7_193 */
 301                 >;
 302         };
 303 };
 304
 305 &omap5_pmx_wkup {
 306         pinctrl-names = "default";
 307         pinctrl-0 = <
 308                         &usbhost_wkup_pins
 309         >;
 310
 311         palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
 312                 pinctrl-single,pins = <
 313                         OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
 314                 >;
 315         };
 316
 317         usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 318                 pinctrl-single,pins = <
 319                         OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
 320                 >;
 321         };
 322
 323         wlcore_irq_pin: pinmux_wlcore_irq_pin {
 324                 pinctrl-single,pins = <
 325                         OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)        /* llia_wakereqin.gpio1_wk14 */
 326                 >;
 327         };
 328 };
 329
 330 &mmc1 {
 331         vmmc-supply = <&ldo9_reg>;
 332         bus-width = <4>;
 333 };
 334
 335 &mmc2 {
 336         vmmc-supply = <&vmmcsd_fixed>;
 337         bus-width = <8>;
 338         ti,non-removable;
 339 };
 340
 341 &mmc3 {
 342         vmmc-supply = <&vmmcsdio_fixed>;
 343         mmc-pwrseq = <&mmc3_pwrseq>;
 344         bus-width = <4>;
 345         non-removable;
 346         cap-power-off-card;
 347         pinctrl-names = "default";
 348         pinctrl-0 = <&mmc3_pins>;
 349         interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 350                                &omap5_pmx_core 0x16a>;
 351
 352         #address-cells = <1>;
 353         #size-cells = <0>;
 354         wlcore: wlcore@2 {
 355                 compatible = "ti,wl1271";
 356                 reg = <2>;
 357                 pinctrl-names = "default";
 358                 pinctrl-0 = <&wlcore_irq_pin>;
 359                 interrupt-parent = <&gpio1>;
 360                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;  /* gpio 14 */
 361                 ref-clock-frequency = <26000000>;
 362         };
 363 };
 364
 365 &mmc4 {
 366         status = "disabled";
 367 };
 368
 369 &mmc5 {
 370         status = "disabled";
 371 };
 372
 373 &i2c1 {
 374         pinctrl-names = "default";
 375         pinctrl-0 = <&i2c1_pins>;
 376
 377         clock-frequency = <400000>;
 378
 379         palmas: palmas@48 {
 380                 compatible = "ti,palmas";
 381                 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
 382                 reg = <0x48>;
 383                 interrupt-controller;
 384                 #interrupt-cells = <2>;
 385                 ti,system-power-controller;
 386                 ti,mux-pad1 = <0xa1>;
 387                 ti,mux-pad2 = <0x1b>;
 388                 pinctrl-names = "default";
 389                 pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 390
 391                 palmas_gpio: gpio {
 392                         compatible = "ti,palmas-gpio";
 393                         gpio-controller;
 394                         #gpio-cells = <2>;
 395                 };
 396
 397                 extcon_usb3: palmas_usb {
 398                         compatible = "ti,palmas-usb-vid";
 399                         ti,enable-vbus-detection;
 400                         ti,enable-id-detection;
 401                         ti,wakeup;
 402                         id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
 403                 };
 404
 405                 clk32kgaudio: palmas_clk32k@1 {
 406                         compatible = "ti,palmas-clk32kgaudio";
 407                         #clock-cells = <0>;
 408                 };
 409
 410                 rtc {
 411                         compatible = "ti,palmas-rtc";
 412                         interrupt-parent = <&palmas>;
 413                         interrupts = <8 IRQ_TYPE_NONE>;
 414                         ti,backup-battery-chargeable;
 415                         ti,backup-battery-charge-high-current;
 416                 };
 417
 418                 gpadc {
 419                         compatible = "ti,palmas-gpadc";
 420                         interrupts = <18 0
 421                                       16 0
 422                                       17 0>;
 423                         #io-channel-cells = <1>;
 424                         ti,channel0-current-microamp = <5>;
 425                         ti,channel3-current-microamp = <10>;
 426                 };
 427
 428                 palmas_pmic {
 429                         compatible = "ti,palmas-pmic";
 430                         interrupt-parent = <&palmas>;
 431                         interrupts = <14 IRQ_TYPE_NONE>;
 432                         interrupt-names = "short-irq";
 433
 434                         ti,ldo6-vibrator;
 435
 436                         smps123-in-supply = <&vsys_cobra>;
 437                         smps45-in-supply = <&vsys_cobra>;
 438                         smps6-in-supply = <&vsys_cobra>;
 439                         smps7-in-supply = <&vsys_cobra>;
 440                         smps8-in-supply = <&vsys_cobra>;
 441                         smps9-in-supply = <&vsys_cobra>;
 442                         smps10_out2-in-supply = <&vsys_cobra>;
 443                         smps10_out1-in-supply = <&vsys_cobra>;
 444                         ldo1-in-supply = <&vsys_cobra>;
 445                         ldo2-in-supply = <&vsys_cobra>;
 446                         ldo3-in-supply = <&vdds_1v8_main>;
 447                         ldo4-in-supply = <&vdds_1v8_main>;
 448                         ldo5-in-supply = <&vsys_cobra>;
 449                         ldo6-in-supply = <&vdds_1v8_main>;
 450                         ldo7-in-supply = <&vsys_cobra>;
 451                         ldo8-in-supply = <&vsys_cobra>;
 452                         ldo9-in-supply = <&vmmcsd_fixed>;
 453                         ldoln-in-supply = <&vsys_cobra>;
 454                         ldousb-in-supply = <&vsys_cobra>;
 455
 456                         regulators {
 457                                 smps123_reg: smps123 {
 458                                         /* VDD_OPP_MPU */
 459                                         regulator-name = "smps123";
 460                                         regulator-min-microvolt = < 600000>;
 461                                         regulator-max-microvolt = <1500000>;
 462                                         regulator-always-on;
 463                                         regulator-boot-on;
 464                                 };
 465
 466                                 smps45_reg: smps45 {
 467                                         /* VDD_OPP_MM */
 468                                         regulator-name = "smps45";
 469                                         regulator-min-microvolt = < 600000>;
 470                                         regulator-max-microvolt = <1310000>;
 471                                         regulator-always-on;
 472                                         regulator-boot-on;
 473                                 };
 474
 475                                 smps6_reg: smps6 {
 476                                         /* VDD_DDR3 - over VDD_SMPS6 */
 477                                         regulator-name = "smps6";
 478                                         regulator-min-microvolt = <1200000>;
 479                                         regulator-max-microvolt = <1200000>;
 480                                         regulator-always-on;
 481                                         regulator-boot-on;
 482                                 };
 483
 484                                 smps7_reg: smps7 {
 485                                         /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 486                                         regulator-name = "smps7";
 487                                         regulator-min-microvolt = <1800000>;
 488                                         regulator-max-microvolt = <1800000>;
 489                                         regulator-always-on;
 490                                         regulator-boot-on;
 491                                 };
 492
 493                                 smps8_reg: smps8 {
 494                                         /* VDD_OPP_CORE */
 495                                         regulator-name = "smps8";
 496                                         regulator-min-microvolt = < 600000>;
 497                                         regulator-max-microvolt = <1310000>;
 498                                         regulator-always-on;
 499                                         regulator-boot-on;
 500                                 };
 501
 502                                 smps9_reg: smps9 {
 503                                         /* VDDA_2v1_AUD over VDD_2v1 */
 504                                         regulator-name = "smps9";
 505                                         regulator-min-microvolt = <2100000>;
 506                                         regulator-max-microvolt = <2100000>;
 507                                         ti,smps-range = <0x80>;
 508                                 };
 509
 510                                 smps10_out2_reg: smps10_out2 {
 511                                         /* VBUS_5V_OTG */
 512                                         regulator-name = "smps10_out2";
 513                                         regulator-min-microvolt = <5000000>;
 514                                         regulator-max-microvolt = <5000000>;
 515                                         regulator-always-on;
 516                                         regulator-boot-on;
 517                                 };
 518
 519                                 smps10_out1_reg: smps10_out1 {
 520                                         /* VBUS_5V_OTG */
 521                                         regulator-name = "smps10_out1";
 522                                         regulator-min-microvolt = <5000000>;
 523                                         regulator-max-microvolt = <5000000>;
 524                                 };
 525
 526                                 ldo1_reg: ldo1 {
 527                                         /* VDDAPHY_CAM: vdda_csiport */
 528                                         regulator-name = "ldo1";
 529                                         regulator-min-microvolt = <1800000>;
 530                                         regulator-max-microvolt = <1800000>;
 531                                 };
 532
 533                                 ldo2_reg: ldo2 {
 534                                         /* VCC_2V8_DISP: Does not go anywhere */
 535                                         regulator-name = "ldo2";
 536                                         regulator-min-microvolt = <2800000>;
 537                                         regulator-max-microvolt = <2800000>;
 538                                         /* Unused */
 539                                         status = "disabled";
 540                                 };
 541
 542                                 ldo3_reg: ldo3 {
 543                                         /* VDDAPHY_MDM: vdda_lli */
 544                                         regulator-name = "ldo3";
 545                                         regulator-min-microvolt = <1500000>;
 546                                         regulator-max-microvolt = <1500000>;
 547                                         regulator-boot-on;
 548                                         /* Only if Modem is used */
 549                                         status = "disabled";
 550                                 };
 551
 552                                 ldo4_reg: ldo4 {
 553                                         /* VDDAPHY_DISP: vdda_dsiport/hdmi */
 554                                         regulator-name = "ldo4";
 555                                         regulator-min-microvolt = <1800000>;
 556                                         regulator-max-microvolt = <1800000>;
 557                                 };
 558
 559                                 ldo5_reg: ldo5 {
 560                                         /* VDDA_1V8_PHY: usb/sata/hdmi.. */
 561                                         regulator-name = "ldo5";
 562                                         regulator-min-microvolt = <1800000>;
 563                                         regulator-max-microvolt = <1800000>;
 564                                         regulator-always-on;
 565                                         regulator-boot-on;
 566                                 };
 567
 568                                 ldo6_reg: ldo6 {
 569                                         /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 570                                         regulator-name = "ldo6";
 571                                         regulator-min-microvolt = <1200000>;
 572                                         regulator-max-microvolt = <1200000>;
 573                                         regulator-always-on;
 574                                         regulator-boot-on;
 575                                 };
 576
 577                                 ldo7_reg: ldo7 {
 578                                         /* VDD_VPP: vpp1 */
 579                                         regulator-name = "ldo7";
 580                                         regulator-min-microvolt = <2000000>;
 581                                         regulator-max-microvolt = <2000000>;
 582                                         /* Only for efuse reprograming! */
 583                                         status = "disabled";
 584                                 };
 585
 586                                 ldo8_reg: ldo8 {
 587                                         /* VDD_3v0: Does not go anywhere */
 588                                         regulator-name = "ldo8";
 589                                         regulator-min-microvolt = <3000000>;
 590                                         regulator-max-microvolt = <3000000>;
 591                                         regulator-boot-on;
 592                                         /* Unused */
 593                                         status = "disabled";
 594                                 };
 595
 596                                 ldo9_reg: ldo9 {
 597                                         /* VCC_DV_SDIO: vdds_sdcard */
 598                                         regulator-name = "ldo9";
 599                                         regulator-min-microvolt = <1800000>;
 600                                         regulator-max-microvolt = <3000000>;
 601                                         regulator-boot-on;
 602                                 };
 603
 604                                 ldoln_reg: ldoln {
 605                                         /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 606                                         regulator-name = "ldoln";
 607                                         regulator-min-microvolt = <1800000>;
 608                                         regulator-max-microvolt = <1800000>;
 609                                         regulator-always-on;
 610                                         regulator-boot-on;
 611                                 };
 612
 613                                 ldousb_reg: ldousb {
 614                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 615                                         regulator-name = "ldousb";
 616                                         regulator-min-microvolt = <3250000>;
 617                                         regulator-max-microvolt = <3250000>;
 618                                         regulator-always-on;
 619                                         regulator-boot-on;
 620                                 };
 621
 622                                 regen3_reg: regen3 {
 623                                         /* REGEN3 controls LDO9 supply to card */
 624                                         regulator-name = "regen3";
 625                                         regulator-always-on;
 626                                         regulator-boot-on;
 627                                 };
 628                         };
 629                 };
 630
 631                 palmas_power_button: palmas_power_button {
 632                         compatible = "ti,palmas-pwrbutton";
 633                         interrupt-parent = <&palmas>;
 634                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 635                         wakeup-source;
 636                 };
 637         };
 638
 639         twl6040: twl@4b {
 640                 compatible = "ti,twl6040";
 641                 #clock-cells = <0>;
 642                 reg = <0x4b>;
 643
 644                 pinctrl-names = "default";
 645                 pinctrl-0 = <&twl6040_pins>;
 646
 647                 interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
 648
 649                 /* audpwron gpio defined in the board specific dts */
 650
 651                 vio-supply = <&smps7_reg>;
 652                 v2v1-supply = <&smps9_reg>;
 653                 enable-active-high;
 654
 655                 clocks = <&clk32kgaudio>;
 656                 clock-names = "clk32k";
 657         };
 658 };
 659
 660 &mcpdm {
 661         pinctrl-names = "default";
 662         pinctrl-0 = <&mcpdm_pins>;
 663
 664         clocks = <&twl6040>;
 665         clock-names = "pdmclk";
 666
 667         status = "okay";
 668 };
 669
 670 &mcbsp1 {
 671         pinctrl-names = "default";
 672         pinctrl-0 = <&mcbsp1_pins>;
 673         status = "okay";
 674 };
 675
 676 &mcbsp2 {
 677         pinctrl-names = "default";
 678         pinctrl-0 = <&mcbsp2_pins>;
 679         status = "okay";
 680 };
 681
 682 &usbhshost {
 683         port2-mode = "ehci-hsic";
 684         port3-mode = "ehci-hsic";
 685 };
 686
 687 &usbhsehci {
 688         phys = <0 &hsusb2_phy &hsusb3_phy>;
 689 };
 690
 691 &usb3 {
 692         extcon = <&extcon_usb3>;
 693         vbus-supply = <&smps10_out1_reg>;
 694 };
 695
 696 &mcspi1 {
 697
 698 };
 699
 700 &mcspi2 {
 701         pinctrl-names = "default";
 702         pinctrl-0 = <&mcspi2_pins>;
 703 };
 704
 705 &mcspi3 {
 706         pinctrl-names = "default";
 707         pinctrl-0 = <&mcspi3_pins>;
 708 };
 709
 710 &uart1 {
 711         pinctrl-names = "default";
 712         pinctrl-0 = <&uart1_pins>;
 713 };
 714
 715 &uart3 {
 716         pinctrl-names = "default";
 717         pinctrl-0 = <&uart3_pins>;
 718         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 719                               <&omap5_pmx_core 0x19c>;
 720 };
 721
 722 &uart5 {
 723         pinctrl-names = "default";
 724         pinctrl-0 = <&uart5_pins>;
 725 };
 726
 727 &cpu0 {
 728         cpu0-supply = <&smps123_reg>;
 729 };
 730
 731 &dss {
 732         status = "ok";
 733 };
 734
 735 &hdmi {
 736         status = "ok";
 737
 738         /* vdda-supply populated in board specific dts file */
 739
 740         pinctrl-names = "default";
 741         pinctrl-0 = <&dss_hdmi_pins>;
 742
 743         port {
 744                 hdmi_out: endpoint {
 745                         remote-endpoint = <&tpd12s015_in>;
 746                 };
 747         };
 748 };