arch/arm/boot/dts/stih407-pinctrl.dtsi

   1 /*
   2  * Copyright (C) 2014 STMicroelectronics Limited.
   3  * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * publishhed by the Free Software Foundation.
   8  */
   9 #include "st-pincfg.h"
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 / {
  12
  13         aliases {
  14                 /* 0-5: PIO_SBC */
  15                 gpio0 = &pio0;
  16                 gpio1 = &pio1;
  17                 gpio2 = &pio2;
  18                 gpio3 = &pio3;
  19                 gpio4 = &pio4;
  20                 gpio5 = &pio5;
  21                 /* 10-19: PIO_FRONT0 */
  22                 gpio6 = &pio10;
  23                 gpio7 = &pio11;
  24                 gpio8 = &pio12;
  25                 gpio9 = &pio13;
  26                 gpio10 = &pio14;
  27                 gpio11 = &pio15;
  28                 gpio12 = &pio16;
  29                 gpio13 = &pio17;
  30                 gpio14 = &pio18;
  31                 gpio15 = &pio19;
  32                 /* 20: PIO_FRONT1 */
  33                 gpio16 = &pio20;
  34                 /* 30-35: PIO_REAR */
  35                 gpio17 = &pio30;
  36                 gpio18 = &pio31;
  37                 gpio19 = &pio32;
  38                 gpio20 = &pio33;
  39                 gpio21 = &pio34;
  40                 gpio22 = &pio35;
  41                 /* 40-42: PIO_FLASH */
  42                 gpio23 = &pio40;
  43                 gpio24 = &pio41;
  44                 gpio25 = &pio42;
  45         };
  46
  47         soc {
  48                 pin-controller-sbc {
  49                         #address-cells = <1>;
  50                         #size-cells = <1>;
  51                         compatible = "st,stih407-sbc-pinctrl";
  52                         st,syscfg = <&syscfg_sbc>;
  53                         reg = <0x0961f080 0x4>;
  54                         reg-names = "irqmux";
  55                         interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
  56                         interrupt-names = "irqmux";
  57                         ranges = <0 0x09610000 0x6000>;
  58
  59                         pio0: gpio@09610000 {
  60                                 gpio-controller;
  61                                 #gpio-cells = <2>;
  62                                 interrupt-controller;
  63                                 #interrupt-cells = <2>;
  64                                 reg = <0x0 0x100>;
  65                                 st,bank-name = "PIO0";
  66                         };
  67                         pio1: gpio@09611000 {
  68                                 gpio-controller;
  69                                 #gpio-cells = <2>;
  70                                 interrupt-controller;
  71                                 #interrupt-cells = <2>;
  72                                 reg = <0x1000 0x100>;
  73                                 st,bank-name = "PIO1";
  74                         };
  75                         pio2: gpio@09612000 {
  76                                 gpio-controller;
  77                                 #gpio-cells = <2>;
  78                                 interrupt-controller;
  79                                 #interrupt-cells = <2>;
  80                                 reg = <0x2000 0x100>;
  81                                 st,bank-name = "PIO2";
  82                         };
  83                         pio3: gpio@09613000 {
  84                                 gpio-controller;
  85                                 #gpio-cells = <2>;
  86                                 interrupt-controller;
  87                                 #interrupt-cells = <2>;
  88                                 reg = <0x3000 0x100>;
  89                                 st,bank-name = "PIO3";
  90                         };
  91                         pio4: gpio@09614000 {
  92                                 gpio-controller;
  93                                 #gpio-cells = <2>;
  94                                 interrupt-controller;
  95                                 #interrupt-cells = <2>;
  96                                 reg = <0x4000 0x100>;
  97                                 st,bank-name = "PIO4";
  98                         };
  99
 100                         pio5: gpio@09615000 {
 101                                 gpio-controller;
 102                                 #gpio-cells = <2>;
 103                                 interrupt-controller;
 104                                 #interrupt-cells = <2>;
 105                                 reg = <0x5000 0x100>;
 106                                 st,bank-name = "PIO5";
 107                                 st,retime-pin-mask = <0x3f>;
 108                         };
 109
 110                         cec0 {
 111                                 pinctrl_cec0_default: cec0-default {
 112                                         st,pins {
 113                                                 hdmi_cec = <&pio2 4 ALT1 BIDIR>;
 114                                         };
 115                                 };
 116                         };
 117
 118                         rc {
 119                                 pinctrl_ir: ir0 {
 120                                         st,pins {
 121                                                 ir = <&pio4 0 ALT2 IN>;
 122                                         };
 123                                 };
 124
 125                                 pinctrl_uhf: uhf0 {
 126                                         st,pins {
 127                                                 ir = <&pio4 1 ALT2 IN>;
 128                                         };
 129                                 };
 130
 131                                 pinctrl_tx: tx0 {
 132                                         st,pins {
 133                                                 tx = <&pio4 2 ALT2 OUT>;
 134                                         };
 135                                 };
 136
 137                                 pinctrl_tx_od: tx_od0 {
 138                                         st,pins {
 139                                                 tx_od = <&pio4 3 ALT2 OUT>;
 140                                         };
 141                                 };
 142                         };
 143
 144                         /* SBC_ASC0 - UART10 */
 145                         sbc_serial0 {
 146                                 pinctrl_sbc_serial0: sbc_serial0-0 {
 147                                         st,pins {
 148                                                 tx = <&pio3 4 ALT1 OUT>;
 149                                                 rx = <&pio3 5 ALT1 IN>;
 150                                         };
 151                                 };
 152                         };
 153                         /* SBC_ASC1 - UART11 */
 154                         sbc_serial1 {
 155                                 pinctrl_sbc_serial1: sbc_serial1-0 {
 156                                         st,pins {
 157                                                 tx = <&pio2 6 ALT3 OUT>;
 158                                                 rx = <&pio2 7 ALT3 IN>;
 159                                         };
 160                                 };
 161                         };
 162
 163                         i2c10 {
 164                                 pinctrl_i2c10_default: i2c10-default {
 165                                         st,pins {
 166                                                 sda = <&pio4 6 ALT1 BIDIR>;
 167                                                 scl = <&pio4 5 ALT1 BIDIR>;
 168                                         };
 169                                 };
 170                         };
 171
 172                         i2c11 {
 173                                 pinctrl_i2c11_default: i2c11-default {
 174                                         st,pins {
 175                                                 sda = <&pio5 1 ALT1 BIDIR>;
 176                                                 scl = <&pio5 0 ALT1 BIDIR>;
 177                                         };
 178                                 };
 179                         };
 180
 181                         keyscan {
 182                                 pinctrl_keyscan: keyscan {
 183                                         st,pins {
 184                                                 keyin0 = <&pio4 0 ALT6 IN>;
 185                                                 keyin1 = <&pio4 5 ALT4 IN>;
 186                                                 keyin2 = <&pio0 4 ALT2 IN>;
 187                                                 keyin3 = <&pio2 6 ALT2 IN>;
 188
 189                                                 keyout0 = <&pio4 6 ALT4 OUT>;
 190                                                 keyout1 = <&pio1 7 ALT2 OUT>;
 191                                                 keyout2 = <&pio0 6 ALT2 OUT>;
 192                                                 keyout3 = <&pio2 7 ALT2 OUT>;
 193                                         };
 194                                 };
 195                         };
 196
 197                         gmac1 {
 198                                 /*
 199                                  * Almost all the boards based on STiH407 SoC have an embedded
 200                                  * switch where the mdio/mdc have been used for managing the SMI
 201                                  * iface via I2C. For this reason these lines can be allocated
 202                                  * by using dedicated configuration (in case of there will be a
 203                                  * standard PHY transceiver on-board).
 204                                  */
 205                                 pinctrl_rgmii1: rgmii1-0 {
 206                                         st,pins {
 207
 208                                                 txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
 209                                                 txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
 210                                                 txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
 211                                                 txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
 212                                                 txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
 213                                                 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
 214                                                 rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
 215                                                 rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
 216                                                 rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
 217                                                 rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
 218                                                 rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
 219                                                 rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
 220                                                 clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
 221                                                 phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
 222                                         };
 223                                 };
 224
 225                                 pinctrl_rgmii1_mdio: rgmii1-mdio {
 226                                         st,pins {
 227                                                 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
 228                                                 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
 229                                                 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
 230                                         };
 231                                 };
 232
 233                                 pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
 234                                         st,pins {
 235                                                 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
 236                                                 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
 237                                         };
 238                                 };
 239
 240                                 pinctrl_mii1: mii1 {
 241                                         st,pins {
 242                                                 txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 243                                                 txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 244                                                 txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 245                                                 txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 246                                                 txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 247                                                 txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 248                                                 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
 249                                                 col = <&pio0 7 ALT1 IN BYPASS 1000>;
 250
 251                                                 mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
 252                                                 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
 253                                                 crs = <&pio1 2 ALT1 IN BYPASS 1000>;
 254                                                 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
 255                                                 rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 256                                                 rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 257                                                 rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 258                                                 rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 259
 260                                                 rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 261                                                 rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 262                                                 rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
 263                                                 phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
 264                                         };
 265                                 };
 266
 267                                 pinctrl_rmii1: rmii1-0 {
 268                                         st,pins {
 269                                                 txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 270                                                 txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 271                                                 txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 272                                                 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
 273                                                 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
 274                                                 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
 275                                                 rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
 276                                                 rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
 277                                                 rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
 278                                                 rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 279                                         };
 280                                 };
 281
 282                                 pinctrl_rmii1_phyclk: rmii1_phyclk {
 283                                         st,pins {
 284                                                 phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
 285                                         };
 286                                 };
 287
 288                                 pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
 289                                         st,pins {
 290                                                 phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
 291                                         };
 292                                 };
 293                         };
 294
 295                         pwm1 {
 296                                 pinctrl_pwm1_chan0_default: pwm1-0-default {
 297                                         st,pins {
 298                                                 pwm-out = <&pio3 0 ALT1 OUT>;
 299                                                 pwm-capturein = <&pio3 2 ALT1 IN>;
 300                                         };
 301                                 };
 302                                 pinctrl_pwm1_chan1_default: pwm1-1-default {
 303                                         st,pins {
 304                                                 pwm-capturein = <&pio4 3 ALT1 IN>;
 305                                                 pwm-out = <&pio4 4 ALT1 OUT>;
 306                                         };
 307                                 };
 308                                 pinctrl_pwm1_chan2_default: pwm1-2-default {
 309                                         st,pins {
 310                                                 pwm-out = <&pio4 6 ALT3 OUT>;
 311                                         };
 312                                 };
 313                                 pinctrl_pwm1_chan3_default: pwm1-3-default {
 314                                         st,pins {
 315                                                 pwm-out = <&pio4 7 ALT3 OUT>;
 316                                         };
 317                                 };
 318                         };
 319
 320                         spi10 {
 321                                 pinctrl_spi10_default: spi10-4w-alt1-0 {
 322                                         st,pins {
 323                                                 mtsr = <&pio4 6 ALT1 OUT>;
 324                                                 mrst = <&pio4 7 ALT1 IN>;
 325                                                 scl = <&pio4 5 ALT1 OUT>;
 326                                         };
 327                                 };
 328
 329                                 pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
 330                                         st,pins {
 331                                                 mtsr = <&pio4 6 ALT1 BIDIR_PU>;
 332                                                 scl = <&pio4 5 ALT1 OUT>;
 333                                         };
 334                                 };
 335                         };
 336
 337                         spi11 {
 338                                 pinctrl_spi11_default: spi11-4w-alt2-0 {
 339                                         st,pins {
 340                                                 mtsr = <&pio3 1 ALT2 OUT>;
 341                                                 mrst = <&pio3 0 ALT2 IN>;
 342                                                 scl = <&pio3 2 ALT2 OUT>;
 343                                         };
 344                                 };
 345
 346                                 pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
 347                                         st,pins {
 348                                                 mtsr = <&pio3 1 ALT2 BIDIR_PU>;
 349                                                 scl = <&pio3 2 ALT2 OUT>;
 350                                         };
 351                                 };
 352                         };
 353
 354                         spi12 {
 355                                 pinctrl_spi12_default: spi12-4w-alt2-0 {
 356                                         st,pins {
 357                                                 mtsr = <&pio3 6 ALT2 OUT>;
 358                                                 mrst = <&pio3 4 ALT2 IN>;
 359                                                 scl = <&pio3 7 ALT2 OUT>;
 360                                         };
 361                                 };
 362
 363                                 pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
 364                                         st,pins {
 365                                                 mtsr = <&pio3 6 ALT2 BIDIR_PU>;
 366                                                 scl = <&pio3 7 ALT2 OUT>;
 367                                         };
 368                                 };
 369                         };
 370                 };
 371
 372                 pin-controller-front0 {
 373                         #address-cells = <1>;
 374                         #size-cells = <1>;
 375                         compatible = "st,stih407-front-pinctrl";
 376                         st,syscfg = <&syscfg_front>;
 377                         reg = <0x0920f080 0x4>;
 378                         reg-names = "irqmux";
 379                         interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
 380                         interrupt-names = "irqmux";
 381                         ranges = <0 0x09200000 0x10000>;
 382
 383                         pio10: pio@09200000 {
 384                                 gpio-controller;
 385                                 #gpio-cells = <2>;
 386                                 interrupt-controller;
 387                                 #interrupt-cells = <2>;
 388                                 reg = <0x0 0x100>;
 389                                 st,bank-name = "PIO10";
 390                         };
 391                         pio11: pio@09201000 {
 392                                 gpio-controller;
 393                                 #gpio-cells = <2>;
 394                                 interrupt-controller;
 395                                 #interrupt-cells = <2>;
 396                                 reg = <0x1000 0x100>;
 397                                 st,bank-name = "PIO11";
 398                         };
 399                         pio12: pio@09202000 {
 400                                 gpio-controller;
 401                                 #gpio-cells = <2>;
 402                                 interrupt-controller;
 403                                 #interrupt-cells = <2>;
 404                                 reg = <0x2000 0x100>;
 405                                 st,bank-name = "PIO12";
 406                         };
 407                         pio13: pio@09203000 {
 408                                 gpio-controller;
 409                                 #gpio-cells = <2>;
 410                                 interrupt-controller;
 411                                 #interrupt-cells = <2>;
 412                                 reg = <0x3000 0x100>;
 413                                 st,bank-name = "PIO13";
 414                         };
 415                         pio14: pio@09204000 {
 416                                 gpio-controller;
 417                                 #gpio-cells = <2>;
 418                                 interrupt-controller;
 419                                 #interrupt-cells = <2>;
 420                                 reg = <0x4000 0x100>;
 421                                 st,bank-name = "PIO14";
 422                         };
 423                         pio15: pio@09205000 {
 424                                 gpio-controller;
 425                                 #gpio-cells = <2>;
 426                                 interrupt-controller;
 427                                 #interrupt-cells = <2>;
 428                                 reg = <0x5000 0x100>;
 429                                 st,bank-name = "PIO15";
 430                         };
 431                         pio16: pio@09206000 {
 432                                 gpio-controller;
 433                                 #gpio-cells = <2>;
 434                                 interrupt-controller;
 435                                 #interrupt-cells = <2>;
 436                                 reg = <0x6000 0x100>;
 437                                 st,bank-name = "PIO16";
 438                         };
 439                         pio17: pio@09207000 {
 440                                 gpio-controller;
 441                                 #gpio-cells = <2>;
 442                                 interrupt-controller;
 443                                 #interrupt-cells = <2>;
 444                                 reg = <0x7000 0x100>;
 445                                 st,bank-name = "PIO17";
 446                         };
 447                         pio18: pio@09208000 {
 448                                 gpio-controller;
 449                                 #gpio-cells = <2>;
 450                                 interrupt-controller;
 451                                 #interrupt-cells = <2>;
 452                                 reg = <0x8000 0x100>;
 453                                 st,bank-name = "PIO18";
 454                         };
 455                         pio19: pio@09209000 {
 456                                 gpio-controller;
 457                                 #gpio-cells = <2>;
 458                                 interrupt-controller;
 459                                 #interrupt-cells = <2>;
 460                                 reg = <0x9000 0x100>;
 461                                 st,bank-name = "PIO19";
 462                         };
 463
 464                         /* Comms */
 465                         serial0 {
 466                                 pinctrl_serial0: serial0-0 {
 467                                         st,pins {
 468                                                 tx = <&pio17 0 ALT1 OUT>;
 469                                                 rx = <&pio17 1 ALT1 IN>;
 470                                         };
 471                                 };
 472                         };
 473
 474                         serial1 {
 475                                 pinctrl_serial1: serial1-0 {
 476                                         st,pins {
 477                                                 tx = <&pio16 0 ALT1 OUT>;
 478                                                 rx = <&pio16 1 ALT1 IN>;
 479                                         };
 480                                 };
 481                         };
 482
 483                         serial2 {
 484                                 pinctrl_serial2: serial2-0 {
 485                                         st,pins {
 486                                                 tx = <&pio15 0 ALT1 OUT>;
 487                                                 rx = <&pio15 1 ALT1 IN>;
 488                                         };
 489                                 };
 490                         };
 491
 492                         mmc1 {
 493                                 pinctrl_sd1: sd1-0 {
 494                                         st,pins {
 495                                                 sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
 496                                                 sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
 497                                                 sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
 498                                                 sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
 499                                                 sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
 500                                                 sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
 501                                                 sd_led = <&pio16 6 ALT6 OUT>;
 502                                                 sd_pwren = <&pio16 7 ALT6 OUT>;
 503                                                 sd_cd = <&pio19 0 ALT6 IN>;
 504                                                 sd_wp = <&pio19 1 ALT6 IN>;
 505                                         };
 506                                 };
 507                         };
 508
 509
 510                         i2c0 {
 511                                 pinctrl_i2c0_default: i2c0-default {
 512                                         st,pins {
 513                                                 sda = <&pio10 6 ALT2 BIDIR>;
 514                                                 scl = <&pio10 5 ALT2 BIDIR>;
 515                                         };
 516                                 };
 517                         };
 518
 519                         i2c1 {
 520                                 pinctrl_i2c1_default: i2c1-default {
 521                                         st,pins {
 522                                                 sda = <&pio11 1 ALT2 BIDIR>;
 523                                                 scl = <&pio11 0 ALT2 BIDIR>;
 524                                         };
 525                                 };
 526                         };
 527
 528                         i2c2 {
 529                                 pinctrl_i2c2_default: i2c2-default {
 530                                         st,pins {
 531                                                 sda = <&pio15 6 ALT2 BIDIR>;
 532                                                 scl = <&pio15 5 ALT2 BIDIR>;
 533                                         };
 534                                 };
 535
 536                                 pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
 537                                         st,pins {
 538                                                 sda = <&pio12 6 ALT2 BIDIR>;
 539                                                 scl = <&pio12 5 ALT2 BIDIR>;
 540                                         };
 541                                 };
 542                         };
 543
 544                         i2c3 {
 545                                 pinctrl_i2c3_default: i2c3-alt1-0 {
 546                                         st,pins {
 547                                                 sda = <&pio18 6 ALT1 BIDIR>;
 548                                                 scl = <&pio18 5 ALT1 BIDIR>;
 549                                         };
 550                                 };
 551                                 pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
 552                                         st,pins {
 553                                                 sda = <&pio17 7 ALT1 BIDIR>;
 554                                                 scl = <&pio17 6 ALT1 BIDIR>;
 555                                         };
 556                                 };
 557                                 pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
 558                                         st,pins {
 559                                                 sda = <&pio13 6 ALT3 BIDIR>;
 560                                                 scl = <&pio13 5 ALT3 BIDIR>;
 561                                         };
 562                                 };
 563                         };
 564
 565                         spi0 {
 566                                 pinctrl_spi0_default: spi0-4w-alt2-0 {
 567                                         st,pins {
 568                                                 mtsr = <&pio10 6 ALT2 OUT>;
 569                                                 mrst = <&pio10 7 ALT2 IN>;
 570                                                 scl = <&pio10 5 ALT2 OUT>;
 571                                         };
 572                                 };
 573
 574                                 pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
 575                                         st,pins {
 576                                                 mtsr = <&pio10 6 ALT2 BIDIR_PU>;
 577                                                 scl = <&pio10 5 ALT2 OUT>;
 578                                         };
 579                                 };
 580
 581                                 pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
 582                                         st,pins {
 583                                                 mtsr = <&pio19 7 ALT1 OUT>;
 584                                                 mrst = <&pio19 5 ALT1 IN>;
 585                                                 scl = <&pio19 6 ALT1 OUT>;
 586                                         };
 587                                 };
 588
 589                                 pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
 590                                         st,pins {
 591                                                 mtsr = <&pio19 7 ALT1 BIDIR_PU>;
 592                                                 scl = <&pio19 6 ALT1 OUT>;
 593                                         };
 594                                 };
 595                         };
 596
 597                         spi1 {
 598                                 pinctrl_spi1_default: spi1-4w-alt2-0 {
 599                                         st,pins {
 600                                                 mtsr = <&pio11 1 ALT2 OUT>;
 601                                                 mrst = <&pio11 2 ALT2 IN>;
 602                                                 scl = <&pio11 0 ALT2 OUT>;
 603                                         };
 604                                 };
 605
 606                                 pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
 607                                         st,pins {
 608                                                 mtsr = <&pio11 1 ALT2 BIDIR_PU>;
 609                                                 scl = <&pio11 0 ALT2 OUT>;
 610                                         };
 611                                 };
 612
 613                                 pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
 614                                         st,pins {
 615                                                 mtsr = <&pio14 3 ALT1 OUT>;
 616                                                 mrst = <&pio14 4 ALT1 IN>;
 617                                                 scl = <&pio14 2 ALT1 OUT>;
 618                                         };
 619                                 };
 620
 621                                 pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
 622                                         st,pins {
 623                                                 mtsr = <&pio14 3 ALT1 BIDIR_PU>;
 624                                                 scl = <&pio14 2 ALT1 OUT>;
 625                                         };
 626                                 };
 627                         };
 628
 629                         spi2 {
 630                                 pinctrl_spi2_default: spi2-4w-alt2-0 {
 631                                         st,pins {
 632                                                 mtsr = <&pio12 6 ALT2 OUT>;
 633                                                 mrst = <&pio12 7 ALT2 IN>;
 634                                                 scl = <&pio12 5 ALT2 OUT>;
 635                                         };
 636                                 };
 637
 638                                 pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
 639                                         st,pins {
 640                                                 mtsr = <&pio12 6 ALT2 BIDIR_PU>;
 641                                                 scl = <&pio12 5 ALT2 OUT>;
 642                                         };
 643                                 };
 644
 645                                 pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
 646                                         st,pins {
 647                                                 mtsr = <&pio14 6 ALT1 OUT>;
 648                                                 mrst = <&pio14 7 ALT1 IN>;
 649                                                 scl = <&pio14 5 ALT1 OUT>;
 650                                         };
 651                                 };
 652
 653                                 pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
 654                                         st,pins {
 655                                                 mtsr = <&pio14 6 ALT1 BIDIR_PU>;
 656                                                 scl = <&pio14 5 ALT1 OUT>;
 657                                         };
 658                                 };
 659
 660                                 pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
 661                                         st,pins {
 662                                                 mtsr = <&pio15 6 ALT2 OUT>;
 663                                                 mrst = <&pio15 7 ALT2 IN>;
 664                                                 scl = <&pio15 5 ALT2 OUT>;
 665                                         };
 666                                 };
 667
 668                                 pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
 669                                         st,pins {
 670                                                 mtsr = <&pio15 6 ALT2 BIDIR_PU>;
 671                                                 scl = <&pio15 5 ALT2 OUT>;
 672                                         };
 673                                 };
 674                         };
 675
 676                         spi3 {
 677                                 pinctrl_spi3_default: spi3-4w-alt3-0 {
 678                                         st,pins {
 679                                                 mtsr = <&pio13 6 ALT3 OUT>;
 680                                                 mrst = <&pio13 7 ALT3 IN>;
 681                                                 scl = <&pio13 5 ALT3 OUT>;
 682                                         };
 683                                 };
 684
 685                                 pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
 686                                         st,pins {
 687                                                 mtsr = <&pio13 6 ALT3 BIDIR_PU>;
 688                                                 scl = <&pio13 5 ALT3 OUT>;
 689                                         };
 690                                 };
 691
 692                                 pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
 693                                         st,pins {
 694                                                 mtsr = <&pio17 7 ALT1 OUT>;
 695                                                 mrst = <&pio17 5 ALT1 IN>;
 696                                                 scl = <&pio17 6 ALT1 OUT>;
 697                                         };
 698                                 };
 699
 700                                 pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
 701                                         st,pins {
 702                                                 mtsr = <&pio17 7 ALT1 BIDIR_PU>;
 703                                                 scl = <&pio17 6 ALT1 OUT>;
 704                                         };
 705                                 };
 706
 707                                 pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
 708                                         st,pins {
 709                                                 mtsr = <&pio18 6 ALT1 OUT>;
 710                                                 mrst = <&pio18 7 ALT1 IN>;
 711                                                 scl = <&pio18 5 ALT1 OUT>;
 712                                         };
 713                                 };
 714
 715                                 pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
 716                                         st,pins {
 717                                                 mtsr = <&pio18 6 ALT1 BIDIR_PU>;
 718                                                 scl = <&pio18 5 ALT1 OUT>;
 719                                         };
 720                                 };
 721                         };
 722
 723                         tsin0 {
 724                                 pinctrl_tsin0_parallel: tsin0_parallel {
 725                                         st,pins {
 726                                                 DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 727                                                 DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 728                                                 DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 729                                                 DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 730                                                 DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 731                                                 DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 732                                                 DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 733                                                 DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 734                                                 CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 735                                                 VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 736                                                 ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 737                                                 PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 738                                         };
 739                                 };
 740                                 pinctrl_tsin0_serial: tsin0_serial {
 741                                         st,pins {
 742                                                 DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 743                                                 CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 744                                                 VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 745                                                 ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 746                                                 PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 747                                         };
 748                                 };
 749                         };
 750
 751                         tsin1 {
 752                                 pinctrl_tsin1_parallel: tsin1_parallel {
 753                                         st,pins {
 754                                                 DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 755                                                 DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 756                                                 DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 757                                                 DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 758                                                 DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 759                                                 DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 760                                                 DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 761                                                 DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 762                                                 CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
 763                                                 VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 764                                                 ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 765                                                 PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 766                                         };
 767                                 };
 768                                 pinctrl_tsin1_serial: tsin1_serial {
 769                                         st,pins {
 770                                                 DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 771                                                 CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
 772                                                 VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 773                                                 ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 774                                                 PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 775                                         };
 776                                 };
 777                         };
 778
 779                         tsin2 {
 780                                 pinctrl_tsin2_parallel: tsin2_parallel {
 781                                         st,pins {
 782                                                 DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 783                                                 DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
 784                                                 DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
 785                                                 DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
 786                                                 DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 787                                                 DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
 788                                                 DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 789                                                 DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 790                                                 CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 791                                                 VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 792                                                 ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 793                                                 PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 794                                         };
 795                                 };
 796                                 pinctrl_tsin2_serial: tsin2_serial {
 797                                         st,pins {
 798                                                 DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 799                                                 CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 800                                                 VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 801                                                 ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 802                                                 PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 803                                         };
 804                                 };
 805                         };
 806
 807                         tsin3 {
 808                                 pinctrl_tsin3_serial: tsin3_serial {
 809                                         st,pins {
 810                                                 DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 811                                                 CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
 812                                                 VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 813                                                 ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 814                                                 PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 815                                         };
 816                                 };
 817                         };
 818
 819                         tsin4 {
 820                                 pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
 821                                         st,pins {
 822                                                 DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 823                                                 CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
 824                                                 VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
 825                                                 ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
 826                                                 PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 827                                         };
 828                                 };
 829                         };
 830
 831                         tsin5 {
 832                                 pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
 833                                         st,pins {
 834                                                 DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 835                                                 CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 836                                                 VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 837                                                 ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 838                                                 PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 839                                         };
 840                                 };
 841                                 pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
 842                                         st,pins {
 843                                                 DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 844                                                 CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
 845                                                 VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 846                                                 ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 847                                                 PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
 848                                         };
 849                                 };
 850                         };
 851
 852                         tsout0 {
 853                                 pinctrl_tsout0_parallel: tsout0_parallel {
 854                                         st,pins {
 855                                                 DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 856                                                 DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 857                                                 DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 858                                                 DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 859                                                 DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 860                                                 DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 861                                                 DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 862                                                 DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 863                                                 CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
 864                                                 VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 865                                                 ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 866                                                 PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 867                                         };
 868                                 };
 869                                 pinctrl_tsout0_serial: tsout0_serial {
 870                                         st,pins {
 871                                                 DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 872                                                 CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
 873                                                 VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 874                                                 ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 875                                                 PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
 876                                         };
 877                                 };
 878                         };
 879
 880                         tsout1 {
 881                                 pinctrl_tsout1_serial: tsout1_serial {
 882                                         st,pins {
 883                                                 DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 884                                                 CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
 885                                                 VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 886                                                 ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 887                                                 PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
 888                                         };
 889                                 };
 890                         };
 891
 892                         mtsin0 {
 893                                 pinctrl_mtsin0_parallel: mtsin0_parallel {
 894                                         st,pins {
 895                                                 DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 896                                                 DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 897                                                 DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 898                                                 DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 899                                                 DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 900                                                 DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 901                                                 DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 902                                                 DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 903                                                 CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
 904                                                 VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 905                                                 ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 906                                                 PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
 907                                         };
 908                                 };
 909                         };
 910
 911                         systrace {
 912                                 pinctrl_systrace_default: systrace-default {
 913                                         st,pins {
 914                                                 trc_data0 = <&pio11 3 ALT5 OUT>;
 915                                                 trc_data1 = <&pio11 4 ALT5 OUT>;
 916                                                 trc_data2 = <&pio11 5 ALT5 OUT>;
 917                                                 trc_data3 = <&pio11 6 ALT5 OUT>;
 918                                                 trc_clk   = <&pio11 7 ALT5 OUT>;
 919                                         };
 920                                 };
 921                         };
 922                 };
 923
 924                 pin-controller-front1 {
 925                         #address-cells = <1>;
 926                         #size-cells = <1>;
 927                         compatible = "st,stih407-front-pinctrl";
 928                         st,syscfg = <&syscfg_front>;
 929                         reg = <0x0921f080 0x4>;
 930                         reg-names = "irqmux";
 931                         interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
 932                         interrupt-names = "irqmux";
 933                         ranges = <0 0x09210000 0x10000>;
 934
 935                         pio20: pio@09210000 {
 936                                 gpio-controller;
 937                                 #gpio-cells = <2>;
 938                                 interrupt-controller;
 939                                 #interrupt-cells = <2>;
 940                                 reg = <0x0 0x100>;
 941                                 st,bank-name = "PIO20";
 942                         };
 943
 944                         tsin4 {
 945                                 pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
 946                                         st,pins {
 947                                                 DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 948                                                 CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
 949                                                 VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 950                                                 ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 951                                                 PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
 952                                         };
 953                                 };
 954                         };
 955                 };
 956
 957                 pin-controller-rear {
 958                         #address-cells = <1>;
 959                         #size-cells = <1>;
 960                         compatible = "st,stih407-rear-pinctrl";
 961                         st,syscfg = <&syscfg_rear>;
 962                         reg = <0x0922f080 0x4>;
 963                         reg-names = "irqmux";
 964                         interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
 965                         interrupt-names = "irqmux";
 966                         ranges = <0 0x09220000 0x6000>;
 967
 968                         pio30: gpio@09220000 {
 969                                 gpio-controller;
 970                                 #gpio-cells = <2>;
 971                                 interrupt-controller;
 972                                 #interrupt-cells = <2>;
 973                                 reg = <0x0 0x100>;
 974                                 st,bank-name = "PIO30";
 975                         };
 976                         pio31: gpio@09221000 {
 977                                 gpio-controller;
 978                                 #gpio-cells = <2>;
 979                                 interrupt-controller;
 980                                 #interrupt-cells = <2>;
 981                                 reg = <0x1000 0x100>;
 982                                 st,bank-name = "PIO31";
 983                         };
 984                         pio32: gpio@09222000 {
 985                                 gpio-controller;
 986                                 #gpio-cells = <2>;
 987                                 interrupt-controller;
 988                                 #interrupt-cells = <2>;
 989                                 reg = <0x2000 0x100>;
 990                                 st,bank-name = "PIO32";
 991                         };
 992                         pio33: gpio@09223000 {
 993                                 gpio-controller;
 994                                 #gpio-cells = <2>;
 995                                 interrupt-controller;
 996                                 #interrupt-cells = <2>;
 997                                 reg = <0x3000 0x100>;
 998                                 st,bank-name = "PIO33";
 999                         };
1000                         pio34: gpio@09224000 {
1001                                 gpio-controller;
1002                                 #gpio-cells = <2>;
1003                                 interrupt-controller;
1004                                 #interrupt-cells = <2>;
1005                                 reg = <0x4000 0x100>;
1006                                 st,bank-name = "PIO34";
1007                         };
1008                         pio35: gpio@09225000 {
1009                                 gpio-controller;
1010                                 #gpio-cells = <2>;
1011                                 interrupt-controller;
1012                                 #interrupt-cells = <2>;
1013                                 reg = <0x5000 0x100>;
1014                                 st,bank-name = "PIO35";
1015                                 st,retime-pin-mask = <0x7f>;
1016                         };
1017
1018                         i2c4 {
1019                                 pinctrl_i2c4_default: i2c4-default {
1020                                         st,pins {
1021                                                 sda = <&pio30 1 ALT1 BIDIR>;
1022                                                 scl = <&pio30 0 ALT1 BIDIR>;
1023                                         };
1024                                 };
1025                         };
1026
1027                         i2c5 {
1028                                 pinctrl_i2c5_default: i2c5-default {
1029                                         st,pins {
1030                                                 sda = <&pio34 4 ALT1 BIDIR>;
1031                                                 scl = <&pio34 3 ALT1 BIDIR>;
1032                                         };
1033                                 };
1034                         };
1035
1036                         usb3 {
1037                                 pinctrl_usb3: usb3-2 {
1038                                         st,pins {
1039                                                 usb-oc-detect = <&pio35 4 ALT1 IN>;
1040                                                 usb-pwr-enable = <&pio35 5 ALT1 OUT>;
1041                                                 usb-vbus-valid = <&pio35 6 ALT1 IN>;
1042                                         };
1043                                 };
1044                         };
1045
1046                         pwm0 {
1047                                 pinctrl_pwm0_chan0_default: pwm0-0-default {
1048                                         st,pins {
1049                                                 pwm-capturein = <&pio31 0 ALT1 IN>;
1050                                                 pwm-out = <&pio31 1 ALT1 OUT>;
1051                                         };
1052                                 };
1053                         };
1054
1055                         spi4 {
1056                                 pinctrl_spi4_default: spi4-4w-alt1-0 {
1057                                         st,pins {
1058                                                 mtsr = <&pio30 1 ALT1 OUT>;
1059                                                 mrst = <&pio30 2 ALT1 IN>;
1060                                                 scl = <&pio30 0 ALT1 OUT>;
1061                                         };
1062                                 };
1063
1064                                 pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
1065                                         st,pins {
1066                                                 mtsr = <&pio30 1 ALT1 BIDIR_PU>;
1067                                                 scl = <&pio30 0 ALT1 OUT>;
1068                                         };
1069                                 };
1070
1071                                 pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
1072                                         st,pins {
1073                                                 mtsr = <&pio34 1 ALT3 OUT>;
1074                                                 mrst = <&pio34 2 ALT3 IN>;
1075                                                 scl = <&pio34 0 ALT3 OUT>;
1076                                         };
1077                                 };
1078
1079                                 pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
1080                                         st,pins {
1081                                                 mtsr = <&pio34 1 ALT3 BIDIR_PU>;
1082                                                 scl = <&pio34 0 ALT3 OUT>;
1083                                         };
1084                                 };
1085                         };
1086
1087                         i2s_out {
1088                                 pinctrl_i2s_8ch_out: i2s_8ch_out{
1089                                         st,pins {
1090                                                 mclk = <&pio33 5 ALT1 OUT>;
1091                                                 lrclk = <&pio33 7 ALT1 OUT>;
1092                                                 sclk = <&pio33 6 ALT1 OUT>;
1093                                                 data0 = <&pio33 4 ALT1 OUT>;
1094                                                 data1 = <&pio34 0 ALT1 OUT>;
1095                                                 data2 = <&pio34 1 ALT1 OUT>;
1096                                                 data3 = <&pio34 2 ALT1 OUT>;
1097                                         };
1098                                 };
1099
1100                                 pinctrl_i2s_2ch_out: i2s_2ch_out{
1101                                         st,pins {
1102                                                 mclk = <&pio33 5 ALT1 OUT>;
1103                                                 lrclk = <&pio33 7 ALT1 OUT>;
1104                                                 sclk = <&pio33 6 ALT1 OUT>;
1105                                                 data0 = <&pio33 4 ALT1 OUT>;
1106                                         };
1107                                 };
1108                         };
1109
1110                         i2s_in {
1111                                 pinctrl_i2s_8ch_in: i2s_8ch_in{
1112                                         st,pins {
1113                                                 mclk = <&pio32 5 ALT1 IN>;
1114                                                 lrclk = <&pio32 7 ALT1 IN>;
1115                                                 sclk = <&pio32 6 ALT1 IN>;
1116                                                 data0 = <&pio32 4 ALT1 IN>;
1117                                                 data1 = <&pio33 0 ALT1 IN>;
1118                                                 data2 = <&pio33 1 ALT1 IN>;
1119                                                 data3 = <&pio33 2 ALT1 IN>;
1120                                                 data4 = <&pio33 3 ALT1 IN>;
1121                                         };
1122                                 };
1123
1124                                 pinctrl_i2s_2ch_in: i2s_2ch_in{
1125                                         st,pins {
1126                                                 mclk = <&pio32 5 ALT1 IN>;
1127                                                 lrclk = <&pio32 7 ALT1 IN>;
1128                                                 sclk = <&pio32 6 ALT1 IN>;
1129                                                 data0 = <&pio32 4 ALT1 IN>;
1130                                         };
1131                                 };
1132                         };
1133
1134                         spdif_out {
1135                                 pinctrl_spdif_out: spdif_out{
1136                                         st,pins {
1137                                                 spdif_out = <&pio34 7 ALT1 OUT>;
1138                                         };
1139                                 };
1140                         };
1141
1142                         serial3 {
1143                                 pinctrl_serial3: serial3-0 {
1144                                         st,pins {
1145                                                 tx = <&pio31 3 ALT1 OUT>;
1146                                                 rx = <&pio31 4 ALT1 IN>;
1147                                         };
1148                                 };
1149                         };
1150                 };
1151
1152                 pin-controller-flash {
1153                         #address-cells = <1>;
1154                         #size-cells = <1>;
1155                         compatible = "st,stih407-flash-pinctrl";
1156                         st,syscfg = <&syscfg_flash>;
1157                         reg = <0x0923f080 0x4>;
1158                         reg-names = "irqmux";
1159                         interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
1160                         interrupts-names = "irqmux";
1161                         ranges = <0 0x09230000 0x3000>;
1162
1163                         pio40: gpio@09230000 {
1164                                 gpio-controller;
1165                                 #gpio-cells = <2>;
1166                                 interrupt-controller;
1167                                 #interrupt-cells = <2>;
1168                                 reg = <0 0x100>;
1169                                 st,bank-name = "PIO40";
1170                         };
1171                         pio41: gpio@09231000 {
1172                                 gpio-controller;
1173                                 #gpio-cells = <2>;
1174                                 interrupt-controller;
1175                                 #interrupt-cells = <2>;
1176                                 reg = <0x1000 0x100>;
1177                                 st,bank-name = "PIO41";
1178                         };
1179                         pio42: gpio@09232000 {
1180                                 gpio-controller;
1181                                 #gpio-cells = <2>;
1182                                 interrupt-controller;
1183                                 #interrupt-cells = <2>;
1184                                 reg = <0x2000 0x100>;
1185                                 st,bank-name = "PIO42";
1186                         };
1187
1188                         mmc0 {
1189                                 pinctrl_mmc0: mmc0-0 {
1190                                         st,pins {
1191                                                 emmc_clk = <&pio40 6 ALT1 BIDIR>;
1192                                                 emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
1193                                                 emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
1194                                                 emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
1195                                                 emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
1196                                                 emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
1197                                                 emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
1198                                                 emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
1199                                                 emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
1200                                                 emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
1201                                         };
1202                                 };
1203                                 pinctrl_sd0: sd0-0 {
1204                                         st,pins {
1205                                                 sd_clk = <&pio40 6 ALT1 BIDIR>;
1206                                                 sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
1207                                                 sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
1208                                                 sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
1209                                                 sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
1210                                                 sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
1211                                                 sd_led = <&pio42 0 ALT2 OUT>;
1212                                                 sd_pwren = <&pio42 2 ALT2 OUT>;
1213                                                 sd_vsel = <&pio42 3 ALT2 OUT>;
1214                                                 sd_cd = <&pio42 4 ALT2 IN>;
1215                                                 sd_wp = <&pio42 5 ALT2 IN>;
1216                                         };
1217                                 };
1218                         };
1219
1220                         fsm {
1221                                 pinctrl_fsm: fsm {
1222                                         st,pins {
1223                                                 spi-fsm-clk = <&pio40 1 ALT1 OUT>;
1224                                                 spi-fsm-cs = <&pio40 0 ALT1 OUT>;
1225                                                 spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
1226                                                 spi-fsm-miso = <&pio40 3 ALT1 IN>;
1227                                                 spi-fsm-hol = <&pio40 5 ALT1 OUT>;
1228                                                 spi-fsm-wp = <&pio40 4 ALT1 OUT>;
1229                                         };
1230                                 };
1231                         };
1232
1233                         nand {
1234                                 pinctrl_nand: nand {
1235                                         st,pins {
1236                                                 nand_cs1 = <&pio40 6 ALT3 OUT>;
1237                                                 nand_cs0 = <&pio40 7 ALT3 OUT>;
1238                                                 nand_d0 = <&pio41 0 ALT3 BIDIR>;
1239                                                 nand_d1 = <&pio41 1 ALT3 BIDIR>;
1240                                                 nand_d2 = <&pio41 2 ALT3 BIDIR>;
1241                                                 nand_d3 = <&pio41 3 ALT3 BIDIR>;
1242                                                 nand_d4 = <&pio41 4 ALT3 BIDIR>;
1243                                                 nand_d5 = <&pio41 5 ALT3 BIDIR>;
1244                                                 nand_d6 = <&pio41 6 ALT3 BIDIR>;
1245                                                 nand_d7 = <&pio41 7 ALT3 BIDIR>;
1246                                                 nand_we = <&pio42 0 ALT3 OUT>;
1247                                                 nand_dqs = <&pio42 1 ALT3 OUT>;
1248                                                 nand_ale = <&pio42 2 ALT3 OUT>;
1249                                                 nand_cle = <&pio42 3 ALT3 OUT>;
1250                                                 nand_rnb = <&pio42 4 ALT3 IN>;
1251                                                 nand_oe = <&pio42 5 ALT3 OUT>;
1252                                         };
1253                                 };
1254                         };
1255                 };
1256         };
1257 };