arch/arm/boot/dts/stih415-pinctrl.dtsi

   1 /*
   2  * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
   3  * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * publishhed by the Free Software Foundation.
   8  */
   9 #include "st-pincfg.h"
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 / {
  12
  13         aliases {
  14                 gpio0   = &pio0;
  15                 gpio1   = &pio1;
  16                 gpio2   = &pio2;
  17                 gpio3   = &pio3;
  18                 gpio4   = &pio4;
  19                 gpio5   = &pio5;
  20                 gpio6   = &pio6;
  21                 gpio7   = &pio7;
  22                 gpio8   = &pio8;
  23                 gpio9   = &pio9;
  24                 gpio10  = &pio10;
  25                 gpio11  = &pio11;
  26                 gpio12  = &pio12;
  27                 gpio13  = &pio13;
  28                 gpio14  = &pio14;
  29                 gpio15  = &pio15;
  30                 gpio16  = &pio16;
  31                 gpio17  = &pio17;
  32                 gpio18  = &pio18;
  33                 gpio19  = &pio100;
  34                 gpio20  = &pio101;
  35                 gpio21  = &pio102;
  36                 gpio22  = &pio103;
  37                 gpio23  = &pio104;
  38                 gpio24  = &pio105;
  39                 gpio25  = &pio106;
  40                 gpio26  = &pio107;
  41         };
  42
  43         soc {
  44                 pin-controller-sbc {
  45                         #address-cells  = <1>;
  46                         #size-cells     = <1>;
  47                         compatible      = "st,stih415-sbc-pinctrl";
  48                         st,syscfg       = <&syscfg_sbc>;
  49                         reg             = <0xfe61f080 0x4>;
  50                         reg-names       = "irqmux";
  51                         interrupts      = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
  52                         interrupt-names = "irqmux";
  53                         ranges          = <0 0xfe610000 0x5000>;
  54
  55                         pio0: gpio@fe610000 {
  56                                 gpio-controller;
  57                                 #gpio-cells     = <2>;
  58                                 interrupt-controller;
  59                                 #interrupt-cells = <2>;
  60                                 reg             = <0 0x100>;
  61                                 st,bank-name    = "PIO0";
  62                         };
  63                         pio1: gpio@fe611000 {
  64                                 gpio-controller;
  65                                 #gpio-cells     = <2>;
  66                                 interrupt-controller;
  67                                 #interrupt-cells = <2>;
  68                                 reg             = <0x1000 0x100>;
  69                                 st,bank-name    = "PIO1";
  70                         };
  71                         pio2: gpio@fe612000 {
  72                                 gpio-controller;
  73                                 #gpio-cells     = <2>;
  74                                 interrupt-controller;
  75                                 #interrupt-cells = <2>;
  76                                 reg             = <0x2000 0x100>;
  77                                 st,bank-name    = "PIO2";
  78                         };
  79                         pio3: gpio@fe613000 {
  80                                 gpio-controller;
  81                                 #gpio-cells     = <2>;
  82                                 interrupt-controller;
  83                                 #interrupt-cells = <2>;
  84                                 reg             = <0x3000 0x100>;
  85                                 st,bank-name    = "PIO3";
  86                         };
  87                         pio4: gpio@fe614000 {
  88                                 gpio-controller;
  89                                 #gpio-cells     = <2>;
  90                                 interrupt-controller;
  91                                 #interrupt-cells = <2>;
  92                                 reg             = <0x4000 0x100>;
  93                                 st,bank-name    = "PIO4";
  94                         };
  95
  96                         sbc_serial1 {
  97                                 pinctrl_sbc_serial1:sbc_serial1 {
  98                                         st,pins {
  99                                                 tx      = <&pio2 6 ALT3 OUT>;
 100                                                 rx      = <&pio2 7 ALT3 IN>;
 101                                         };
 102                                 };
 103                         };
 104
 105                         keyscan {
 106                                 pinctrl_keyscan: keyscan {
 107                                         st,pins {
 108                                                 keyin0 = <&pio0 2 ALT2 IN>;
 109                                                 keyin1 = <&pio0 3 ALT2 IN>;
 110                                                 keyin2 = <&pio0 4 ALT2 IN>;
 111                                                 keyin3 = <&pio2 6 ALT2 IN>;
 112
 113                                                 keyout0 = <&pio1 6 ALT2 OUT>;
 114                                                 keyout1 = <&pio1 7 ALT2 OUT>;
 115                                                 keyout2 = <&pio0 6 ALT2 OUT>;
 116                                                 keyout3 = <&pio2 7 ALT2 OUT>;
 117                                         };
 118                                 };
 119                         };
 120
 121                         sbc_i2c0 {
 122                                 pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 123                                         st,pins {
 124                                                 sda = <&pio4 6 ALT1 BIDIR>;
 125                                                 scl = <&pio4 5 ALT1 BIDIR>;
 126                                         };
 127                                 };
 128                         };
 129
 130                         sbc_i2c1 {
 131                                 pinctrl_sbc_i2c1_default: sbc_i2c1-default {
 132                                         st,pins {
 133                                                 sda = <&pio3 2 ALT2 BIDIR>;
 134                                                 scl = <&pio3 1 ALT2 BIDIR>;
 135                                         };
 136                                 };
 137                         };
 138
 139                         rc{
 140                                 pinctrl_ir: ir0 {
 141                                         st,pins {
 142                                                 ir = <&pio4 0 ALT2 IN>;
 143                                         };
 144                                 };
 145                         };
 146
 147                         gmac1 {
 148                                 pinctrl_mii1: mii1 {
 149                                                 st,pins {
 150                                                  txd0   = <&pio0 0 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 151                                                  txd1   = <&pio0 1 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 152                                                  txd2   = <&pio0 2 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 153                                                  txd3   = <&pio0 3 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 154                                                  txer   = <&pio0 4 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 155                                                  txen   = <&pio0 5 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
 156                                                  txclk  = <&pio0 6 ALT1 IN   NICLK      0       CLK_A>;
 157                                                  col    = <&pio0 7 ALT1 IN   BYPASS     1000>;
 158                                                  mdio   = <&pio1 0 ALT1 OUT  BYPASS     0>;
 159                                                  mdc    = <&pio1 1 ALT1 OUT  NICLK      0       CLK_A>;
 160                                                  crs    = <&pio1 2 ALT1 IN   BYPASS     1000>;
 161                                                  mdint  = <&pio1 3 ALT1 IN   BYPASS     0>;
 162                                                  rxd0   = <&pio1 4 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 163                                                  rxd1   = <&pio1 5 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 164                                                  rxd2   = <&pio1 6 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 165                                                  rxd3   = <&pio1 7 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 166                                                  rxdv   = <&pio2 0 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 167                                                  rx_er  = <&pio2 1 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
 168                                                  rxclk  = <&pio2 2 ALT1 IN   NICLK      0       CLK_A>;
 169                                                  phyclk = <&pio2 3 ALT1 IN   NICLK      1000    CLK_A>;
 170                                         };
 171                                 };
 172
 173                                 pinctrl_rgmii1: rgmii1-0 {
 174                                         st,pins {
 175                                                  txd0 =  <&pio0 0 ALT1 OUT DE_IO        1000    CLK_A>;
 176                                                  txd1 =  <&pio0 1 ALT1 OUT DE_IO        1000    CLK_A>;
 177                                                  txd2 =  <&pio0 2 ALT1 OUT DE_IO        1000    CLK_A>;
 178                                                  txd3 =  <&pio0 3 ALT1 OUT DE_IO        1000    CLK_A>;
 179                                                  txen =  <&pio0 5 ALT1 OUT DE_IO        0       CLK_A>;
 180                                                  txclk = <&pio0 6 ALT1 IN       NICLK   0       CLK_A>;
 181                                                  mdio =  <&pio1 0 ALT1 OUT      BYPASS  0>;
 182                                                  mdc =   <&pio1 1 ALT1 OUT      NICLK   0       CLK_A>;
 183                                                  rxd0 =  <&pio1 4 ALT1 IN DE_IO 0       CLK_A>;
 184                                                  rxd1 =  <&pio1 5 ALT1 IN DE_IO 0       CLK_A>;
 185                                                  rxd2 =  <&pio1 6 ALT1 IN DE_IO 0       CLK_A>;
 186                                                  rxd3 =  <&pio1 7 ALT1 IN DE_IO 0       CLK_A>;
 187
 188                                                  rxdv =   <&pio2 0 ALT1 IN DE_IO        500     CLK_A>;
 189                                                  rxclk =  <&pio2 2 ALT1 IN      NICLK   0       CLK_A>;
 190                                                  phyclk = <&pio2 3 ALT4 OUT     NICLK   0       CLK_B>;
 191
 192                                                  clk125= <&pio3 7 ALT4 IN       NICLK   0       CLK_A>;
 193                                         };
 194                                 };
 195                         };
 196                 };
 197
 198                 pin-controller-front {
 199                         #address-cells  = <1>;
 200                         #size-cells     = <1>;
 201                         compatible      = "st,stih415-front-pinctrl";
 202                         st,syscfg       = <&syscfg_front>;
 203                         reg             = <0xfee0f080 0x4>;
 204                         reg-names       = "irqmux";
 205                         interrupts      = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
 206                         interrupt-names = "irqmux";
 207                         ranges          = <0 0xfee00000 0x8000>;
 208
 209                         pio5: gpio@fee00000 {
 210                                 gpio-controller;
 211                                 #gpio-cells     = <2>;
 212                                 interrupt-controller;
 213                                 #interrupt-cells = <2>;
 214                                 reg             = <0 0x100>;
 215                                 st,bank-name    = "PIO5";
 216                         };
 217                         pio6: gpio@fee01000 {
 218                                 gpio-controller;
 219                                 #gpio-cells     = <2>;
 220                                 interrupt-controller;
 221                                 #interrupt-cells = <2>;
 222                                 reg             = <0x1000 0x100>;
 223                                 st,bank-name    = "PIO6";
 224                         };
 225                         pio7: gpio@fee02000 {
 226                                 gpio-controller;
 227                                 #gpio-cells     = <2>;
 228                                 interrupt-controller;
 229                                 #interrupt-cells = <2>;
 230                                 reg             = <0x2000 0x100>;
 231                                 st,bank-name    = "PIO7";
 232                         };
 233                         pio8: gpio@fee03000 {
 234                                 gpio-controller;
 235                                 #gpio-cells     = <2>;
 236                                 interrupt-controller;
 237                                 #interrupt-cells = <2>;
 238                                 reg             = <0x3000 0x100>;
 239                                 st,bank-name    = "PIO8";
 240                         };
 241                         pio9: gpio@fee04000 {
 242                                 gpio-controller;
 243                                 #gpio-cells     = <2>;
 244                                 interrupt-controller;
 245                                 #interrupt-cells = <2>;
 246                                 reg             = <0x4000 0x100>;
 247                                 st,bank-name    = "PIO9";
 248                         };
 249                         pio10: gpio@fee05000 {
 250                                 gpio-controller;
 251                                 #gpio-cells     = <2>;
 252                                 interrupt-controller;
 253                                 #interrupt-cells = <2>;
 254                                 reg             = <0x5000 0x100>;
 255                                 st,bank-name    = "PIO10";
 256                         };
 257                         pio11: gpio@fee06000 {
 258                                 gpio-controller;
 259                                 #gpio-cells     = <2>;
 260                                 interrupt-controller;
 261                                 #interrupt-cells = <2>;
 262                                 reg             = <0x6000 0x100>;
 263                                 st,bank-name    = "PIO11";
 264                         };
 265                         pio12: gpio@fee07000 {
 266                                 gpio-controller;
 267                                 #gpio-cells     = <2>;
 268                                 interrupt-controller;
 269                                 #interrupt-cells = <2>;
 270                                 reg             = <0x7000 0x100>;
 271                                 st,bank-name    = "PIO12";
 272                         };
 273
 274                         i2c0 {
 275                                 pinctrl_i2c0_default: i2c0-default {
 276                                         st,pins {
 277                                                 sda = <&pio9 3 ALT1 BIDIR>;
 278                                                 scl = <&pio9 2 ALT1 BIDIR>;
 279                                         };
 280                                 };
 281                         };
 282
 283                         i2c1 {
 284                                 pinctrl_i2c1_default: i2c1-default {
 285                                         st,pins {
 286                                                 sda = <&pio12 1 ALT1 BIDIR>;
 287                                                 scl = <&pio12 0 ALT1 BIDIR>;
 288                                         };
 289                                 };
 290                         };
 291                 };
 292
 293                 pin-controller-rear {
 294                         #address-cells  = <1>;
 295                         #size-cells     = <1>;
 296                         compatible      = "st,stih415-rear-pinctrl";
 297                         st,syscfg       = <&syscfg_rear>;
 298                         reg             = <0xfe82f080 0x4>;
 299                         reg-names       = "irqmux";
 300                         interrupts      = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
 301                         interrupt-names = "irqmux";
 302                         ranges          = <0 0xfe820000 0x8000>;
 303
 304                         pio13: gpio@fe820000 {
 305                                 gpio-controller;
 306                                 #gpio-cells     = <2>;
 307                                 interrupt-controller;
 308                                 #interrupt-cells = <2>;
 309                                 reg             = <0 0x100>;
 310                                 st,bank-name    = "PIO13";
 311                         };
 312                         pio14: gpio@fe821000 {
 313                                 gpio-controller;
 314                                 #gpio-cells     = <2>;
 315                                 interrupt-controller;
 316                                 #interrupt-cells = <2>;
 317                                 reg             = <0x1000 0x100>;
 318                                 st,bank-name    = "PIO14";
 319                         };
 320                         pio15: gpio@fe822000 {
 321                                 gpio-controller;
 322                                 #gpio-cells     = <2>;
 323                                 interrupt-controller;
 324                                 #interrupt-cells = <2>;
 325                                 reg             = <0x2000 0x100>;
 326                                 st,bank-name    = "PIO15";
 327                         };
 328                         pio16: gpio@fe823000 {
 329                                 gpio-controller;
 330                                 #gpio-cells     = <2>;
 331                                 interrupt-controller;
 332                                 #interrupt-cells = <2>;
 333                                 reg             = <0x3000 0x100>;
 334                                 st,bank-name    = "PIO16";
 335                         };
 336                         pio17: gpio@fe824000 {
 337                                 gpio-controller;
 338                                 #gpio-cells     = <2>;
 339                                 interrupt-controller;
 340                                 #interrupt-cells = <2>;
 341                                 reg             = <0x4000 0x100>;
 342                                 st,bank-name    = "PIO17";
 343                         };
 344                         pio18: gpio@fe825000 {
 345                                 gpio-controller;
 346                                 #gpio-cells     = <2>;
 347                                 interrupt-controller;
 348                                 #interrupt-cells = <2>;
 349                                 reg             = <0x5000 0x100>;
 350                                 st,bank-name    = "PIO18";
 351                         };
 352
 353                         serial2 {
 354                                 pinctrl_serial2: serial2-0 {
 355                                         st,pins {
 356                                                 tx      = <&pio17 4 ALT2 OUT>;
 357                                                 rx      = <&pio17 5 ALT2 IN>;
 358                                         };
 359                                 };
 360                         };
 361
 362                         gmac0{
 363                                 pinctrl_mii0: mii0 {
 364                                         st,pins {
 365                                          mdint =        <&pio13 6 ALT2  IN      BYPASS          0>;
 366                                          txen =         <&pio13 7 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
 367
 368                                          txd0 =         <&pio14 0 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
 369                                          txd1 =         <&pio14 1 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
 370                                          txd2 =         <&pio14 2 ALT2  OUT     SE_NICLK_IO     0       CLK_B>;
 371                                          txd3 =         <&pio14 3 ALT2  OUT     SE_NICLK_IO     0       CLK_B>;
 372
 373                                          txclk =        <&pio15 0 ALT2  IN      NICLK           0       CLK_A>;
 374                                          txer =         <&pio15 1 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
 375                                          crs =          <&pio15 2 ALT2  IN      BYPASS          1000>;
 376                                          col =          <&pio15 3 ALT2  IN      BYPASS          1000>;
 377                                          mdio  =        <&pio15 4 ALT2  OUT     BYPASS  3000>;
 378                                          mdc   =        <&pio15 5 ALT2  OUT     NICLK   0       CLK_B>;
 379
 380                                          rxd0 =         <&pio16 0 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 381                                          rxd1 =         <&pio16 1 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 382                                          rxd2 =         <&pio16 2 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 383                                          rxd3 =         <&pio16 3 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 384                                          rxdv =         <&pio15 6 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 385                                          rx_er =        <&pio15 7 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
 386                                          rxclk =        <&pio17 0 ALT2  IN      NICLK           0       CLK_A>;
 387                                          phyclk =       <&pio13 5 ALT2  OUT     NICLK   1000    CLK_A>;
 388
 389                                         };
 390                                 };
 391
 392                         pinctrl_gmii0: gmii0 {
 393                                 st,pins {
 394                                          mdint =        <&pio13 6       ALT2 IN         BYPASS  0>;
 395                                          mdio  =        <&pio15 4       ALT2 OUT        BYPASS  3000>;
 396                                          mdc   =        <&pio15 5       ALT2 OUT        NICLK   0       CLK_B>;
 397                                          txen =         <&pio13 7       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
 398
 399                                          txd0 =         <&pio14 0       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
 400                                          txd1 =         <&pio14 1       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
 401                                          txd2 =         <&pio14 2       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 402                                          txd3 =         <&pio14 3       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 403                                          txd4 =         <&pio14 4       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 404                                          txd5 =         <&pio14 5       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 405                                          txd6 =         <&pio14 6       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 406                                          txd7 =         <&pio14 7       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
 407
 408                                          txclk =        <&pio15 0       ALT2 IN         NICLK   0       CLK_A>;
 409                                          txer =         <&pio15 1       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
 410                                          crs =          <&pio15 2       ALT2 IN         BYPASS  1000>;
 411                                          col =          <&pio15 3       ALT2 IN         BYPASS  1000>;
 412                                          rxdv =         <&pio15 6       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 413                                          rx_er =        <&pio15 7       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 414
 415                                          rxd0 =         <&pio16 0       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 416                                          rxd1 =         <&pio16 1       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 417                                          rxd2 =         <&pio16 2       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 418                                          rxd3 =         <&pio16 3       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 419                                          rxd4 =         <&pio16 4       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 420                                          rxd5 =         <&pio16 5       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 421                                          rxd6 =         <&pio16 6       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 422                                          rxd7 =         <&pio16 7       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
 423
 424                                          rxclk =        <&pio17 0       ALT2 IN NICLK   0       CLK_A>;
 425                                          clk125 =       <&pio17 6       ALT1 IN NICLK   0       CLK_A>;
 426                                          phyclk =       <&pio13 5       ALT4 OUT NICLK   0       CLK_B>;
 427
 428
 429                                         };
 430                                 };
 431                         };
 432
 433                         mmc0 {
 434                                 pinctrl_mmc0: mmc0 {
 435                                         st,pins {
 436                                                 mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
 437                                                 data0  = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
 438                                                 data1  = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
 439                                                 data2  = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
 440                                                 data3  = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
 441                                                 cmd    = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
 442                                                 wp     = <&pio15 3 ALT4 IN>;
 443                                                 data4  = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
 444                                                 data5  = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
 445                                                 data6  = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
 446                                                 data7  = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
 447                                                 pwr    = <&pio17 1 ALT4 OUT>;
 448                                                 cd     = <&pio17 2 ALT4 IN>;
 449                                                 led    = <&pio17 3 ALT4 OUT>;
 450                                         };
 451                                 };
 452                         };
 453                 };
 454
 455                 pin-controller-left {
 456                         #address-cells  = <1>;
 457                         #size-cells     = <1>;
 458                         compatible      = "st,stih415-left-pinctrl";
 459                         st,syscfg       = <&syscfg_left>;
 460                         reg             = <0xfd6bf080 0x4>;
 461                         reg-names       = "irqmux";
 462                         interrupts      = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 463                         interrupt-names = "irqmux";
 464                         ranges          = <0 0xfd6b0000 0x3000>;
 465
 466                         pio100: gpio@fd6b0000 {
 467                                 gpio-controller;
 468                                 #gpio-cells     = <2>;
 469                                 interrupt-controller;
 470                                 #interrupt-cells = <2>;
 471                                 reg             = <0 0x100>;
 472                                 st,bank-name    = "PIO100";
 473                         };
 474                         pio101: gpio@fd6b1000 {
 475                                 gpio-controller;
 476                                 #gpio-cells     = <2>;
 477                                 interrupt-controller;
 478                                 #interrupt-cells = <2>;
 479                                 reg             = <0x1000 0x100>;
 480                                 st,bank-name    = "PIO101";
 481                         };
 482                         pio102: gpio@fd6b2000 {
 483                                 gpio-controller;
 484                                 #gpio-cells     = <2>;
 485                                 interrupt-controller;
 486                                 #interrupt-cells = <2>;
 487                                 reg             = <0x2000 0x100>;
 488                                 st,bank-name    = "PIO102";
 489                         };
 490                 };
 491
 492                 pin-controller-right {
 493                         #address-cells  = <1>;
 494                         #size-cells     = <1>;
 495                         compatible      = "st,stih415-right-pinctrl";
 496                         st,syscfg       = <&syscfg_right>;
 497                         reg             = <0xfd33f080 0x4>;
 498                         reg-names       = "irqmux";
 499                         interrupts      = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 500                         interrupt-names = "irqmux";
 501                         ranges          = <0 0xfd330000 0x5000>;
 502
 503                         pio103: gpio@fd330000 {
 504                                 gpio-controller;
 505                                 #gpio-cells     = <2>;
 506                                 interrupt-controller;
 507                                 #interrupt-cells = <2>;
 508                                 reg             = <0 0x100>;
 509                                 st,bank-name    = "PIO103";
 510                         };
 511                         pio104: gpio@fd331000 {
 512                                 gpio-controller;
 513                                 #gpio-cells     = <2>;
 514                                 interrupt-controller;
 515                                 #interrupt-cells = <2>;
 516                                 reg             = <0x1000 0x100>;
 517                                 st,bank-name    = "PIO104";
 518                         };
 519                         pio105: gpio@fd332000 {
 520                                 gpio-controller;
 521                                 #gpio-cells     = <2>;
 522                                 interrupt-controller;
 523                                 #interrupt-cells = <2>;
 524                                 reg             = <0x2000 0x100>;
 525                                 st,bank-name    = "PIO105";
 526                         };
 527                         pio106: gpio@fd333000 {
 528                                 gpio-controller;
 529                                 #gpio-cells     = <2>;
 530                                 interrupt-controller;
 531                                 #interrupt-cells = <2>;
 532                                 reg             = <0x3000 0x100>;
 533                                 st,bank-name    = "PIO106";
 534                         };
 535                         pio107: gpio@fd334000 {
 536                                 gpio-controller;
 537                                 #gpio-cells     = <2>;
 538                                 interrupt-controller;
 539                                 #interrupt-cells = <2>;
 540                                 reg             = <0x4000 0x100>;
 541                                 st,bank-name    = "PIO107";
 542                         };
 543                 };
 544         };
 545 };