Merge tag 'ceph-for-4.9-rc1' of git://github.com/ceph/ceph-client
[cascardo/linux.git] / arch / arm / boot / dts / sun8i-h3-orangepi-pc.dts
1 /*
2  * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
3  *
4  * This file is dual-licensed: you can use it either under the terms
5  * of the GPL or the X11 license, at your option. Note that this dual
6  * licensing only applies to this file, and not this project as a
7  * whole.
8  *
9  *  a) This file is free software; you can redistribute it and/or
10  *     modify it under the terms of the GNU General Public License as
11  *     published by the Free Software Foundation; either version 2 of the
12  *     License, or (at your option) any later version.
13  *
14  *     This file is distributed in the hope that it will be useful,
15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *     GNU General Public License for more details.
18  *
19  * Or, alternatively,
20  *
21  *  b) Permission is hereby granted, free of charge, to any person
22  *     obtaining a copy of this software and associated documentation
23  *     files (the "Software"), to deal in the Software without
24  *     restriction, including without limitation the rights to use,
25  *     copy, modify, merge, publish, distribute, sublicense, and/or
26  *     sell copies of the Software, and to permit persons to whom the
27  *     Software is furnished to do so, subject to the following
28  *     conditions:
29  *
30  *     The above copyright notice and this permission notice shall be
31  *     included in all copies or substantial portions of the Software.
32  *
33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40  *     OTHER DEALINGS IN THE SOFTWARE.
41  */
42
43 /dts-v1/;
44 #include "sun8i-h3.dtsi"
45 #include "sunxi-common-regulators.dtsi"
46
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/input/input.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
50
51 / {
52         model = "Xunlong Orange Pi PC";
53         compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
54
55         aliases {
56                 serial0 = &uart0;
57         };
58
59         chosen {
60                 stdout-path = "serial0:115200n8";
61         };
62
63         leds {
64                 compatible = "gpio-leds";
65                 pinctrl-names = "default";
66                 pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
67
68                 pwr_led {
69                         label = "orangepi:green:pwr";
70                         gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
71                         default-state = "on";
72                 };
73
74                 status_led {
75                         label = "orangepi:red:status";
76                         gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
77                 };
78         };
79
80         r_gpio_keys {
81                 compatible = "gpio-keys";
82                 pinctrl-names = "default";
83                 pinctrl-0 = <&sw_r_opc>;
84
85                 sw4 {
86                         label = "sw4";
87                         linux,code = <BTN_0>;
88                         gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
89                 };
90         };
91 };
92
93 &ehci1 {
94         status = "okay";
95 };
96
97 &ehci2 {
98         status = "okay";
99 };
100
101 &ehci3 {
102         status = "okay";
103 };
104
105 &ir {
106         pinctrl-names = "default";
107         pinctrl-0 = <&ir_pins_a>;
108         status = "okay";
109 };
110
111 &mmc0 {
112         pinctrl-names = "default";
113         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
114         vmmc-supply = <&reg_vcc3v3>;
115         bus-width = <4>;
116         cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
117         cd-inverted;
118         status = "okay";
119 };
120
121 &ohci1 {
122         status = "okay";
123 };
124
125 &ohci2 {
126         status = "okay";
127 };
128
129 &ohci3 {
130         status = "okay";
131 };
132
133 &pio {
134         leds_opc: led_pins@0 {
135                 allwinner,pins = "PA15";
136                 allwinner,function = "gpio_out";
137                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
138                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
139         };
140 };
141
142 &r_pio {
143         leds_r_opc: led_pins@0 {
144                 allwinner,pins = "PL10";
145                 allwinner,function = "gpio_out";
146                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
147                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
148         };
149
150         sw_r_opc: key_pins@0 {
151                 allwinner,pins = "PL3";
152                 allwinner,function = "gpio_in";
153                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
154                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
155         };
156 };
157
158 &uart0 {
159         pinctrl-names = "default";
160         pinctrl-0 = <&uart0_pins_a>;
161         status = "okay";
162 };
163
164 &uart1 {
165         pinctrl-names = "default";
166         pinctrl-0 = <&uart1_pins>;
167         status = "disabled";
168 };
169
170 &uart2 {
171         pinctrl-names = "default";
172         pinctrl-0 = <&uart2_pins>;
173         status = "disabled";
174 };
175
176 &uart3 {
177         pinctrl-names = "default";
178         pinctrl-0 = <&uart3_pins>;
179         status = "disabled";
180 };
181
182 &usbphy {
183         /* USB VBUS is always on */
184         status = "okay";
185 };