arch/arm/boot/dts/sun9i-a80-cubieboard4.dts

   1 /*
   2  * Copyright 2015 Tyler Baker
   3  *
   4  * Tyler Baker <tyler.baker@linaro.org>
   5  * Chen-Yu Tsai <wens@csie.org>
   6  *
   7  * This file is dual-licensed: you can use it either under the terms
   8  * of the GPL or the X11 license, at your option. Note that this dual
   9  * licensing only applies to this file, and not this project as a
  10  * whole.
  11  *
  12  *  a) This file is free software; you can redistribute it and/or
  13  *     modify it under the terms of the GNU General Public License as
  14  *     published by the Free Software Foundation; either version 2 of the
  15  *     License, or (at your option) any later version.
  16  *
  17  *     This file is distributed in the hope that it will be useful,
  18  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  *     GNU General Public License for more details.
  21  *
  22  * Or, alternatively,
  23  *
  24  *  b) Permission is hereby granted, free of charge, to any person
  25  *     obtaining a copy of this software and associated documentation
  26  *     files (the "Software"), to deal in the Software without
  27  *     restriction, including without limitation the rights to use,
  28  *     copy, modify, merge, publish, distribute, sublicense, and/or
  29  *     sell copies of the Software, and to permit persons to whom the
  30  *     Software is furnished to do so, subject to the following
  31  *     conditions:
  32  *
  33  *     The above copyright notice and this permission notice shall be
  34  *     included in all copies or substantial portions of the Software.
  35  *
  36  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  37  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  38  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  39  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  40  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  41  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  42  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  43  *     OTHER DEALINGS IN THE SOFTWARE.
  44  */
  45
  46 /dts-v1/;
  47 #include "sun9i-a80.dtsi"
  48
  49 #include <dt-bindings/gpio/gpio.h>
  50 #include <dt-bindings/pinctrl/sun4i-a10.h>
  51
  52 / {
  53         model = "Cubietech Cubieboard4";
  54         compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
  55
  56         aliases {
  57                 serial0 = &uart0;
  58         };
  59
  60         chosen {
  61                 stdout-path = "serial0:115200n8";
  62         };
  63
  64         leds {
  65                 compatible = "gpio-leds";
  66                 pinctrl-names = "default";
  67                 pinctrl-0 = <&led_pins_cubieboard4>;
  68
  69                 green {
  70                         label = "cubieboard4:green:usr";
  71                         gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
  72                 };
  73
  74                 red {
  75                         label = "cubieboard4:red:usr";
  76                         gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
  77                 };
  78         };
  79 };
  80
  81 &mmc0 {
  82         pinctrl-names = "default";
  83         pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
  84         vmmc-supply = <&reg_dcdc1>;
  85         bus-width = <4>;
  86         cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
  87         cd-inverted;
  88         status = "okay";
  89 };
  90
  91 &mmc2 {
  92         pinctrl-names = "default";
  93         pinctrl-0 = <&mmc2_8bit_pins>;
  94         vmmc-supply = <&reg_dcdc1>;
  95         bus-width = <8>;
  96         non-removable;
  97         cap-mmc-hw-reset;
  98         status = "okay";
  99 };
 100
 101 &mmc2_8bit_pins {
 102         /* Increase drive strength for DDR modes */
 103         allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 104 };
 105
 106 &osc32k {
 107         /* osc32k input is from AC100 */
 108         clocks = <&ac100_rtc 0>;
 109 };
 110
 111 &pio {
 112         led_pins_cubieboard4: led-pins@0 {
 113                 allwinner,pins = "PH6", "PH17";
 114                 allwinner,function = "gpio_out";
 115                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 116                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 117         };
 118
 119         mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
 120                 allwinner,pins = "PH18";
 121                 allwinner,function = "gpio_in";
 122                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 123                 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 124         };
 125 };
 126
 127 &r_ir {
 128         status = "okay";
 129 };
 130
 131 &r_rsb {
 132         status = "okay";
 133
 134         axp809: pmic@3a3 {
 135                 reg = <0x3a3>;
 136                 interrupt-parent = <&nmi_intc>;
 137                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 138
 139                 regulators {
 140                         reg_aldo1: aldo1 {
 141                                 /*
 142                                  * TODO: This should be handled by the
 143                                  * USB PHY driver.
 144                                  */
 145                                 regulator-always-on;
 146                                 regulator-min-microvolt = <3000000>;
 147                                 regulator-max-microvolt = <3000000>;
 148                                 regulator-name = "vcc33-usbh";
 149                         };
 150
 151                         reg_aldo2: aldo2 {
 152                                 regulator-min-microvolt = <1800000>;
 153                                 regulator-max-microvolt = <1800000>;
 154                                 regulator-name = "vcc-pb-io-cam";
 155                         };
 156
 157                         aldo3 {
 158                                 /* unused */
 159                         };
 160
 161                         reg_dc5ldo: dc5ldo {
 162                                 regulator-always-on;
 163                                 regulator-min-microvolt = <800000>;
 164                                 regulator-max-microvolt = <1100000>;
 165                                 regulator-name = "vdd-cpus-09-usbh";
 166                         };
 167
 168                         reg_dcdc1: dcdc1 {
 169                                 regulator-always-on;
 170                                 regulator-min-microvolt = <3000000>;
 171                                 regulator-max-microvolt = <3000000>;
 172                                 regulator-name = "vcc-3v";
 173                         };
 174
 175                         reg_dcdc2: dcdc2 {
 176                                 regulator-min-microvolt = <800000>;
 177                                 regulator-max-microvolt = <1100000>;
 178                                 regulator-name = "vdd-gpu";
 179                         };
 180
 181                         reg_dcdc3: dcdc3 {
 182                                 regulator-always-on;
 183                                 regulator-min-microvolt = <800000>;
 184                                 regulator-max-microvolt = <1100000>;
 185                                 regulator-name = "vdd-cpua";
 186                         };
 187
 188                         reg_dcdc4: dcdc4 {
 189                                 regulator-always-on;
 190                                 regulator-min-microvolt = <800000>;
 191                                 regulator-max-microvolt = <1100000>;
 192                                 regulator-name = "vdd-sys-usb0-hdmi";
 193                         };
 194
 195                         reg_dcdc5: dcdc5 {
 196                                 regulator-always-on;
 197                                 regulator-min-microvolt = <1425000>;
 198                                 regulator-max-microvolt = <1575000>;
 199                                 regulator-name = "vcc-dram";
 200                         };
 201
 202                         reg_dldo1: dldo1 {
 203                                 /*
 204                                  * The WiFi chip supports a wide range
 205                                  * (3.0 ~ 4.8V) of voltages, and so does
 206                                  * this regulator (3.0 ~ 4.2V), but
 207                                  * Allwinner SDK always sets it to 3.3V.
 208                                  */
 209                                 regulator-min-microvolt = <3300000>;
 210                                 regulator-max-microvolt = <3300000>;
 211                                 regulator-name = "vcc-wifi";
 212                         };
 213
 214                         reg_dldo2: dldo2 {
 215                                 regulator-always-on;
 216                                 regulator-min-microvolt = <3000000>;
 217                                 regulator-max-microvolt = <3000000>;
 218                                 regulator-name = "vcc-pl";
 219                         };
 220
 221                         reg_eldo1: eldo1 {
 222                                 regulator-min-microvolt = <1200000>;
 223                                 regulator-max-microvolt = <1200000>;
 224                                 regulator-name = "vcc-dvdd-cam";
 225                         };
 226
 227                         reg_eldo2: eldo2 {
 228                                 regulator-min-microvolt = <1800000>;
 229                                 regulator-max-microvolt = <1800000>;
 230                                 regulator-name = "vcc-pe";
 231                         };
 232
 233                         reg_eldo3: eldo3 {
 234                                 regulator-always-on;
 235                                 regulator-min-microvolt = <3000000>;
 236                                 regulator-max-microvolt = <3000000>;
 237                                 regulator-name = "vcc-pm-codec-io1";
 238                         };
 239
 240                         reg_ldo_io0: ldo_io0 {
 241                                 regulator-always-on;
 242                                 regulator-min-microvolt = <3000000>;
 243                                 regulator-max-microvolt = <3000000>;
 244                                 regulator-name = "vcc-pg";
 245                         };
 246
 247                         reg_ldo_io1: ldo_io1 {
 248                                 regulator-min-microvolt = <2500000>;
 249                                 regulator-max-microvolt = <2500000>;
 250                                 regulator-name = "vcc-pa-gmac-2v5";
 251                         };
 252
 253                         reg_rtc_ldo: rtc_ldo {
 254                                 regulator-name = "vcc-rtc-vdd1v8-io";
 255                         };
 256
 257                         sw {
 258                                 /* unused */
 259                         };
 260                 };
 261         };
 262
 263         axp806: pmic@745 {
 264                 compatible = "x-powers,axp806";
 265                 reg = <0x745>;
 266                 interrupt-parent = <&nmi_intc>;
 267                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 268                 interrupt-controller;
 269                 #interrupt-cells = <1>;
 270                 bldoin-supply = <&reg_dcdce>;
 271
 272                 regulators {
 273                         reg_s_aldo1: aldo1 {
 274                                 regulator-always-on;
 275                                 regulator-min-microvolt = <3000000>;
 276                                 regulator-max-microvolt = <3000000>;
 277                                 regulator-name = "avcc";
 278                         };
 279
 280                         aldo2 {
 281                                 /*
 282                                  * unused, but use a different name to
 283                                  * avoid name clash with axp809's aldo's
 284                                  */
 285                                 regulator-name = "s_aldo2";
 286                         };
 287
 288                         aldo3 {
 289                                 /*
 290                                  * unused, but use a different name to
 291                                  * avoid name clash with axp809's aldo's
 292                                  */
 293                                 regulator-name = "s_aldo3";
 294                         };
 295
 296                         reg_bldo1: bldo1 {
 297                                 regulator-always-on;
 298                                 regulator-min-microvolt = <1700000>;
 299                                 regulator-max-microvolt = <1900000>;
 300                                 regulator-name = "vcc18-efuse-adc-display-csi";
 301                         };
 302
 303                         reg_bldo2: bldo2 {
 304                                 regulator-always-on;
 305                                 regulator-min-microvolt = <1700000>;
 306                                 regulator-max-microvolt = <1900000>;
 307                                 regulator-name =
 308                                         "vdd18-drampll-vcc18-pll-cpvdd";
 309                         };
 310
 311                         bldo3 {
 312                                 /* unused */
 313                         };
 314
 315                         reg_bldo4: bldo4 {
 316                                 regulator-min-microvolt = <1100000>;
 317                                 regulator-max-microvolt = <1300000>;
 318                                 regulator-name = "vcc12-hsic";
 319                         };
 320
 321                         reg_cldo1: cldo1 {
 322                                 /*
 323                                  * This was 3V in the original design, but
 324                                  * 3.3V is the recommended supply voltage
 325                                  * for the Ethernet PHY.
 326                                  */
 327                                 regulator-min-microvolt = <3300000>;
 328                                 regulator-max-microvolt = <3300000>;
 329                                 regulator-name = "vcc-gmac-phy";
 330                         };
 331
 332                         reg_cldo2: cldo2 {
 333                                 regulator-min-microvolt = <2800000>;
 334                                 regulator-max-microvolt = <2800000>;
 335                                 regulator-name = "afvcc-cam";
 336                         };
 337
 338                         reg_cldo3: cldo3 {
 339                                 regulator-min-microvolt = <3000000>;
 340                                 regulator-max-microvolt = <3000000>;
 341                                 regulator-name = "vcc-io-wifi-codec-io2";
 342                         };
 343
 344                         reg_dcdca: dcdca {
 345                                 regulator-always-on;
 346                                 regulator-min-microvolt = <800000>;
 347                                 regulator-max-microvolt = <1100000>;
 348                                 regulator-name = "vdd-cpub";
 349                         };
 350
 351                         reg_dcdcd: dcdcd {
 352                                 regulator-always-on;
 353                                 regulator-min-microvolt = <800000>;
 354                                 regulator-max-microvolt = <1100000>;
 355                                 regulator-name = "vdd-vpu";
 356                         };
 357
 358                         reg_dcdce: dcdce {
 359                                 regulator-always-on;
 360                                 regulator-min-microvolt = <2100000>;
 361                                 regulator-max-microvolt = <2100000>;
 362                                 regulator-name = "vcc-bldo-codec-ldoin";
 363                         };
 364
 365                         sw {
 366                                 /*
 367                                  * unused, but use a different name to
 368                                  * avoid name clash with axp809's sw
 369                                  */
 370                                 regulator-name = "s_sw";
 371                         };
 372                 };
 373         };
 374
 375         ac100: codec@e89 {
 376                 compatible = "x-powers,ac100";
 377                 reg = <0xe89>;
 378
 379                 ac100_codec: codec {
 380                         compatible = "x-powers,ac100-codec";
 381                         interrupt-parent = <&r_pio>;
 382                         interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
 383                         #clock-cells = <0>;
 384                         clock-output-names = "4M_adda";
 385                 };
 386
 387                 ac100_rtc: rtc {
 388                         compatible = "x-powers,ac100-rtc";
 389                         interrupt-parent = <&nmi_intc>;
 390                         interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 391                         clocks = <&ac100_codec>;
 392                         #clock-cells = <1>;
 393                         clock-output-names = "cko1_rtc",
 394                                              "cko2_rtc",
 395                                              "cko3_rtc";
 396                 };
 397         };
 398 };
 399
 400 #include "axp809.dtsi"
 401
 402 &uart0 {
 403         pinctrl-names = "default";
 404         pinctrl-0 = <&uart0_pins_a>;
 405         status = "okay";
 406 };