2 * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
3 * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
4 * Copyright (C) 2006 Michael Buesch <m@bues.ch>
5 * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
6 * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
15 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
16 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
19 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
20 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24 * You should have received a copy of the GNU General Public License along
25 * with this program; if not, write to the Free Software Foundation, Inc.,
26 * 675 Mass Ave, Cambridge, MA 02139, USA.
29 #include "bcm47xx_private.h"
31 #include <linux/export.h>
32 #include <linux/types.h>
33 #include <linux/ethtool.h>
34 #include <linux/phy.h>
35 #include <linux/phy_fixed.h>
36 #include <linux/ssb/ssb.h>
37 #include <linux/ssb/ssb_embedded.h>
38 #include <linux/bcma/bcma_soc.h>
39 #include <asm/bootinfo.h>
42 #include <asm/reboot.h>
45 #include <bcm47xx_nvram.h>
46 #include <bcm47xx_board.h>
48 union bcm47xx_bus bcm47xx_bus;
49 EXPORT_SYMBOL(bcm47xx_bus);
51 enum bcm47xx_bus_type bcm47xx_bus_type;
52 EXPORT_SYMBOL(bcm47xx_bus_type);
54 static void bcm47xx_machine_restart(char *command)
56 printk(KERN_ALERT "Please stand by while rebooting the system...\n");
58 /* Set the watchdog timer to reset immediately */
59 switch (bcm47xx_bus_type) {
60 #ifdef CONFIG_BCM47XX_SSB
61 case BCM47XX_BUS_TYPE_SSB:
62 if (bcm47xx_bus.ssb.chip_id == 0x4785)
63 write_c0_diag4(1 << 22);
64 ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
65 if (bcm47xx_bus.ssb.chip_id == 0x4785) {
74 #ifdef CONFIG_BCM47XX_BCMA
75 case BCM47XX_BUS_TYPE_BCMA:
76 bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
84 static void bcm47xx_machine_halt(void)
86 /* Disable interrupts and watchdog and spin forever */
88 switch (bcm47xx_bus_type) {
89 #ifdef CONFIG_BCM47XX_SSB
90 case BCM47XX_BUS_TYPE_SSB:
91 ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
94 #ifdef CONFIG_BCM47XX_BCMA
95 case BCM47XX_BUS_TYPE_BCMA:
96 bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
104 #ifdef CONFIG_BCM47XX_SSB
105 static int bcm47xx_get_invariants(struct ssb_bus *bus,
106 struct ssb_init_invariants *iv)
110 /* Fill boardinfo structure */
111 memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
113 bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
115 memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
116 bcm47xx_fill_sprom(&iv->sprom, NULL, false);
118 if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
119 iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
124 static void __init bcm47xx_register_ssb(void)
128 struct ssb_mipscore *mcore;
130 err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
131 bcm47xx_get_invariants);
133 panic("Failed to initialize SSB bus (err %d)", err);
135 mcore = &bcm47xx_bus.ssb.mipscore;
136 if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
137 if (strstr(buf, "console=ttyS1")) {
138 struct ssb_serial_port port;
140 printk(KERN_DEBUG "Swapping serial ports!\n");
141 /* swap serial ports */
142 memcpy(&port, &mcore->serial_ports[0], sizeof(port));
143 memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
145 memcpy(&mcore->serial_ports[1], &port, sizeof(port));
151 #ifdef CONFIG_BCM47XX_BCMA
152 static void __init bcm47xx_register_bcma(void)
156 err = bcma_host_soc_register(&bcm47xx_bus.bcma);
158 panic("Failed to register BCMA bus (err %d)", err);
163 * Memory setup is done in the early part of MIPS's arch_mem_init. It's supposed
164 * to detect memory and record it with add_memory_region.
165 * Any extra initializaion performed here must not use kmalloc or bootmem.
167 void __init plat_mem_setup(void)
169 struct cpuinfo_mips *c = ¤t_cpu_data;
171 if ((c->cputype == CPU_74K) || (c->cputype == CPU_1074K)) {
172 printk(KERN_INFO "bcm47xx: using bcma bus\n");
173 #ifdef CONFIG_BCM47XX_BCMA
174 bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
175 bcm47xx_sprom_register_fallbacks();
176 bcm47xx_register_bcma();
177 bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
178 #ifdef CONFIG_HIGHMEM
179 bcm47xx_prom_highmem_init();
183 printk(KERN_INFO "bcm47xx: using ssb bus\n");
184 #ifdef CONFIG_BCM47XX_SSB
185 bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
186 bcm47xx_sprom_register_fallbacks();
187 bcm47xx_register_ssb();
188 bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
192 _machine_restart = bcm47xx_machine_restart;
193 _machine_halt = bcm47xx_machine_halt;
194 pm_power_off = bcm47xx_machine_halt;
198 * This finishes bus initialization doing things that were not possible without
199 * kmalloc. Make sure to call it late enough (after mm_init).
201 void __init bcm47xx_bus_setup(void)
203 #ifdef CONFIG_BCM47XX_BCMA
204 if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) {
207 err = bcma_host_soc_init(&bcm47xx_bus.bcma);
209 panic("Failed to initialize BCMA bus (err %d)", err);
211 bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo,
216 /* With bus initialized we can access NVRAM and detect the board */
217 bcm47xx_board_detect();
218 mips_set_machine_name(bcm47xx_board_get_name());
221 static int __init bcm47xx_cpu_fixes(void)
223 switch (bcm47xx_bus_type) {
224 #ifdef CONFIG_BCM47XX_SSB
225 case BCM47XX_BUS_TYPE_SSB:
229 #ifdef CONFIG_BCM47XX_BCMA
230 case BCM47XX_BUS_TYPE_BCMA:
231 /* The BCM4706 has a problem with the CPU wait instruction.
232 * When r4k_wait or r4k_wait_irqoff is used will just hang and
233 * not return from a msleep(). Removing the cpu_wait
234 * functionality is a workaround for this problem. The BCM4716
235 * does not have this problem.
237 if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
244 arch_initcall(bcm47xx_cpu_fixes);
246 static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
249 .duplex = DUPLEX_FULL,
252 static int __init bcm47xx_register_bus_complete(void)
254 switch (bcm47xx_bus_type) {
255 #ifdef CONFIG_BCM47XX_SSB
256 case BCM47XX_BUS_TYPE_SSB:
260 #ifdef CONFIG_BCM47XX_BCMA
261 case BCM47XX_BUS_TYPE_BCMA:
262 bcma_bus_register(&bcm47xx_bus.bcma.bus);
266 bcm47xx_buttons_register();
267 bcm47xx_leds_register();
268 bcm47xx_workarounds();
270 fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
273 device_initcall(bcm47xx_register_bus_complete);