drivers/acpi/acpica/evrgnini.c

   1 /******************************************************************************
   2  *
   3  * Module Name: evrgnini- ACPI address_space (op_region) init
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2016, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acevents.h"
  47 #include "acnamesp.h"
  48 #include "acinterp.h"
  49
  50 #define _COMPONENT          ACPI_EVENTS
  51 ACPI_MODULE_NAME("evrgnini")
  52
  53 /* Local prototypes */
  54 static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
  55
  56 /*******************************************************************************
  57  *
  58  * FUNCTION:    acpi_ev_system_memory_region_setup
  59  *
  60  * PARAMETERS:  handle              - Region we are interested in
  61  *              function            - Start or stop
  62  *              handler_context     - Address space handler context
  63  *              region_context      - Region specific context
  64  *
  65  * RETURN:      Status
  66  *
  67  * DESCRIPTION: Setup a system_memory operation region
  68  *
  69  ******************************************************************************/
  70
  71 acpi_status
  72 acpi_ev_system_memory_region_setup(acpi_handle handle,
  73                                    u32 function,
  74                                    void *handler_context, void **region_context)
  75 {
  76         union acpi_operand_object *region_desc =
  77             (union acpi_operand_object *)handle;
  78         struct acpi_mem_space_context *local_region_context;
  79
  80         ACPI_FUNCTION_TRACE(ev_system_memory_region_setup);
  81
  82         if (function == ACPI_REGION_DEACTIVATE) {
  83                 if (*region_context) {
  84                         local_region_context =
  85                             (struct acpi_mem_space_context *)*region_context;
  86
  87                         /* Delete a cached mapping if present */
  88
  89                         if (local_region_context->mapped_length) {
  90                                 acpi_os_unmap_memory(local_region_context->
  91                                                      mapped_logical_address,
  92                                                      local_region_context->
  93                                                      mapped_length);
  94                         }
  95                         ACPI_FREE(local_region_context);
  96                         *region_context = NULL;
  97                 }
  98                 return_ACPI_STATUS(AE_OK);
  99         }
 100
 101         /* Create a new context */
 102
 103         local_region_context =
 104             ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_mem_space_context));
 105         if (!(local_region_context)) {
 106                 return_ACPI_STATUS(AE_NO_MEMORY);
 107         }
 108
 109         /* Save the region length and address for use in the handler */
 110
 111         local_region_context->length = region_desc->region.length;
 112         local_region_context->address = region_desc->region.address;
 113
 114         *region_context = local_region_context;
 115         return_ACPI_STATUS(AE_OK);
 116 }
 117
 118 /*******************************************************************************
 119  *
 120  * FUNCTION:    acpi_ev_io_space_region_setup
 121  *
 122  * PARAMETERS:  handle              - Region we are interested in
 123  *              function            - Start or stop
 124  *              handler_context     - Address space handler context
 125  *              region_context      - Region specific context
 126  *
 127  * RETURN:      Status
 128  *
 129  * DESCRIPTION: Setup a IO operation region
 130  *
 131  ******************************************************************************/
 132
 133 acpi_status
 134 acpi_ev_io_space_region_setup(acpi_handle handle,
 135                               u32 function,
 136                               void *handler_context, void **region_context)
 137 {
 138         ACPI_FUNCTION_TRACE(ev_io_space_region_setup);
 139
 140         if (function == ACPI_REGION_DEACTIVATE) {
 141                 *region_context = NULL;
 142         } else {
 143                 *region_context = handler_context;
 144         }
 145
 146         return_ACPI_STATUS(AE_OK);
 147 }
 148
 149 /*******************************************************************************
 150  *
 151  * FUNCTION:    acpi_ev_pci_config_region_setup
 152  *
 153  * PARAMETERS:  handle              - Region we are interested in
 154  *              function            - Start or stop
 155  *              handler_context     - Address space handler context
 156  *              region_context      - Region specific context
 157  *
 158  * RETURN:      Status
 159  *
 160  * DESCRIPTION: Setup a PCI_Config operation region
 161  *
 162  * MUTEX:       Assumes namespace is not locked
 163  *
 164  ******************************************************************************/
 165
 166 acpi_status
 167 acpi_ev_pci_config_region_setup(acpi_handle handle,
 168                                 u32 function,
 169                                 void *handler_context, void **region_context)
 170 {
 171         acpi_status status = AE_OK;
 172         u64 pci_value;
 173         struct acpi_pci_id *pci_id = *region_context;
 174         union acpi_operand_object *handler_obj;
 175         struct acpi_namespace_node *parent_node;
 176         struct acpi_namespace_node *pci_root_node;
 177         struct acpi_namespace_node *pci_device_node;
 178         union acpi_operand_object *region_obj =
 179             (union acpi_operand_object *)handle;
 180
 181         ACPI_FUNCTION_TRACE(ev_pci_config_region_setup);
 182
 183         handler_obj = region_obj->region.handler;
 184         if (!handler_obj) {
 185                 /*
 186                  * No installed handler. This shouldn't happen because the dispatch
 187                  * routine checks before we get here, but we check again just in case.
 188                  */
 189                 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 190                                   "Attempting to init a region %p, with no handler\n",
 191                                   region_obj));
 192                 return_ACPI_STATUS(AE_NOT_EXIST);
 193         }
 194
 195         *region_context = NULL;
 196         if (function == ACPI_REGION_DEACTIVATE) {
 197                 if (pci_id) {
 198                         ACPI_FREE(pci_id);
 199                 }
 200                 return_ACPI_STATUS(status);
 201         }
 202
 203         parent_node = region_obj->region.node->parent;
 204
 205         /*
 206          * Get the _SEG and _BBN values from the device upon which the handler
 207          * is installed.
 208          *
 209          * We need to get the _SEG and _BBN objects relative to the PCI BUS device.
 210          * This is the device the handler has been registered to handle.
 211          */
 212
 213         /*
 214          * If the address_space.Node is still pointing to the root, we need
 215          * to scan upward for a PCI Root bridge and re-associate the op_region
 216          * handlers with that device.
 217          */
 218         if (handler_obj->address_space.node == acpi_gbl_root_node) {
 219
 220                 /* Start search from the parent object */
 221
 222                 pci_root_node = parent_node;
 223                 while (pci_root_node != acpi_gbl_root_node) {
 224
 225                         /* Get the _HID/_CID in order to detect a root_bridge */
 226
 227                         if (acpi_ev_is_pci_root_bridge(pci_root_node)) {
 228
 229                                 /* Install a handler for this PCI root bridge */
 230
 231                                 status = acpi_install_address_space_handler((acpi_handle)pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
 232                                 if (ACPI_FAILURE(status)) {
 233                                         if (status == AE_SAME_HANDLER) {
 234                                                 /*
 235                                                  * It is OK if the handler is already installed on the
 236                                                  * root bridge. Still need to return a context object
 237                                                  * for the new PCI_Config operation region, however.
 238                                                  */
 239                                                 status = AE_OK;
 240                                         } else {
 241                                                 ACPI_EXCEPTION((AE_INFO, status,
 242                                                                 "Could not install PciConfig handler "
 243                                                                 "for Root Bridge %4.4s",
 244                                                                 acpi_ut_get_node_name
 245                                                                 (pci_root_node)));
 246                                         }
 247                                 }
 248                                 break;
 249                         }
 250
 251                         pci_root_node = pci_root_node->parent;
 252                 }
 253
 254                 /* PCI root bridge not found, use namespace root node */
 255         } else {
 256                 pci_root_node = handler_obj->address_space.node;
 257         }
 258
 259         /*
 260          * If this region is now initialized, we are done.
 261          * (install_address_space_handler could have initialized it)
 262          */
 263         if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
 264                 return_ACPI_STATUS(AE_OK);
 265         }
 266
 267         /* Region is still not initialized. Create a new context */
 268
 269         pci_id = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pci_id));
 270         if (!pci_id) {
 271                 return_ACPI_STATUS(AE_NO_MEMORY);
 272         }
 273
 274         /*
 275          * For PCI_Config space access, we need the segment, bus, device and
 276          * function numbers. Acquire them here.
 277          *
 278          * Find the parent device object. (This allows the operation region to be
 279          * within a subscope under the device, such as a control method.)
 280          */
 281         pci_device_node = region_obj->region.node;
 282         while (pci_device_node && (pci_device_node->type != ACPI_TYPE_DEVICE)) {
 283                 pci_device_node = pci_device_node->parent;
 284         }
 285
 286         if (!pci_device_node) {
 287                 ACPI_FREE(pci_id);
 288                 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 289         }
 290
 291         /*
 292          * Get the PCI device and function numbers from the _ADR object
 293          * contained in the parent's scope.
 294          */
 295         status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR,
 296                                                  pci_device_node, &pci_value);
 297
 298         /*
 299          * The default is zero, and since the allocation above zeroed the data,
 300          * just do nothing on failure.
 301          */
 302         if (ACPI_SUCCESS(status)) {
 303                 pci_id->device = ACPI_HIWORD(ACPI_LODWORD(pci_value));
 304                 pci_id->function = ACPI_LOWORD(ACPI_LODWORD(pci_value));
 305         }
 306
 307         /* The PCI segment number comes from the _SEG method */
 308
 309         status = acpi_ut_evaluate_numeric_object(METHOD_NAME__SEG,
 310                                                  pci_root_node, &pci_value);
 311         if (ACPI_SUCCESS(status)) {
 312                 pci_id->segment = ACPI_LOWORD(pci_value);
 313         }
 314
 315         /* The PCI bus number comes from the _BBN method */
 316
 317         status = acpi_ut_evaluate_numeric_object(METHOD_NAME__BBN,
 318                                                  pci_root_node, &pci_value);
 319         if (ACPI_SUCCESS(status)) {
 320                 pci_id->bus = ACPI_LOWORD(pci_value);
 321         }
 322
 323         /* Complete/update the PCI ID for this device */
 324
 325         status =
 326             acpi_hw_derive_pci_id(pci_id, pci_root_node,
 327                                   region_obj->region.node);
 328         if (ACPI_FAILURE(status)) {
 329                 ACPI_FREE(pci_id);
 330                 return_ACPI_STATUS(status);
 331         }
 332
 333         *region_context = pci_id;
 334         return_ACPI_STATUS(AE_OK);
 335 }
 336
 337 /*******************************************************************************
 338  *
 339  * FUNCTION:    acpi_ev_is_pci_root_bridge
 340  *
 341  * PARAMETERS:  node            - Device node being examined
 342  *
 343  * RETURN:      TRUE if device is a PCI/PCI-Express Root Bridge
 344  *
 345  * DESCRIPTION: Determine if the input device represents a PCI Root Bridge by
 346  *              examining the _HID and _CID for the device.
 347  *
 348  ******************************************************************************/
 349
 350 static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
 351 {
 352         acpi_status status;
 353         struct acpi_pnp_device_id *hid;
 354         struct acpi_pnp_device_id_list *cid;
 355         u32 i;
 356         u8 match;
 357
 358         /* Get the _HID and check for a PCI Root Bridge */
 359
 360         status = acpi_ut_execute_HID(node, &hid);
 361         if (ACPI_FAILURE(status)) {
 362                 return (FALSE);
 363         }
 364
 365         match = acpi_ut_is_pci_root_bridge(hid->string);
 366         ACPI_FREE(hid);
 367
 368         if (match) {
 369                 return (TRUE);
 370         }
 371
 372         /* The _HID did not match. Get the _CID and check for a PCI Root Bridge */
 373
 374         status = acpi_ut_execute_CID(node, &cid);
 375         if (ACPI_FAILURE(status)) {
 376                 return (FALSE);
 377         }
 378
 379         /* Check all _CIDs in the returned list */
 380
 381         for (i = 0; i < cid->count; i++) {
 382                 if (acpi_ut_is_pci_root_bridge(cid->ids[i].string)) {
 383                         ACPI_FREE(cid);
 384                         return (TRUE);
 385                 }
 386         }
 387
 388         ACPI_FREE(cid);
 389         return (FALSE);
 390 }
 391
 392 /*******************************************************************************
 393  *
 394  * FUNCTION:    acpi_ev_pci_bar_region_setup
 395  *
 396  * PARAMETERS:  handle              - Region we are interested in
 397  *              function            - Start or stop
 398  *              handler_context     - Address space handler context
 399  *              region_context      - Region specific context
 400  *
 401  * RETURN:      Status
 402  *
 403  * DESCRIPTION: Setup a pci_BAR operation region
 404  *
 405  * MUTEX:       Assumes namespace is not locked
 406  *
 407  ******************************************************************************/
 408
 409 acpi_status
 410 acpi_ev_pci_bar_region_setup(acpi_handle handle,
 411                              u32 function,
 412                              void *handler_context, void **region_context)
 413 {
 414         ACPI_FUNCTION_TRACE(ev_pci_bar_region_setup);
 415
 416         return_ACPI_STATUS(AE_OK);
 417 }
 418
 419 /*******************************************************************************
 420  *
 421  * FUNCTION:    acpi_ev_cmos_region_setup
 422  *
 423  * PARAMETERS:  handle              - Region we are interested in
 424  *              function            - Start or stop
 425  *              handler_context     - Address space handler context
 426  *              region_context      - Region specific context
 427  *
 428  * RETURN:      Status
 429  *
 430  * DESCRIPTION: Setup a CMOS operation region
 431  *
 432  * MUTEX:       Assumes namespace is not locked
 433  *
 434  ******************************************************************************/
 435
 436 acpi_status
 437 acpi_ev_cmos_region_setup(acpi_handle handle,
 438                           u32 function,
 439                           void *handler_context, void **region_context)
 440 {
 441         ACPI_FUNCTION_TRACE(ev_cmos_region_setup);
 442
 443         return_ACPI_STATUS(AE_OK);
 444 }
 445
 446 /*******************************************************************************
 447  *
 448  * FUNCTION:    acpi_ev_default_region_setup
 449  *
 450  * PARAMETERS:  handle              - Region we are interested in
 451  *              function            - Start or stop
 452  *              handler_context     - Address space handler context
 453  *              region_context      - Region specific context
 454  *
 455  * RETURN:      Status
 456  *
 457  * DESCRIPTION: Default region initialization
 458  *
 459  ******************************************************************************/
 460
 461 acpi_status
 462 acpi_ev_default_region_setup(acpi_handle handle,
 463                              u32 function,
 464                              void *handler_context, void **region_context)
 465 {
 466         ACPI_FUNCTION_TRACE(ev_default_region_setup);
 467
 468         if (function == ACPI_REGION_DEACTIVATE) {
 469                 *region_context = NULL;
 470         } else {
 471                 *region_context = handler_context;
 472         }
 473
 474         return_ACPI_STATUS(AE_OK);
 475 }
 476
 477 /*******************************************************************************
 478  *
 479  * FUNCTION:    acpi_ev_initialize_region
 480  *
 481  * PARAMETERS:  region_obj      - Region we are initializing
 482  *              acpi_ns_locked  - Is namespace locked?
 483  *
 484  * RETURN:      Status
 485  *
 486  * DESCRIPTION: Initializes the region, finds any _REG methods and saves them
 487  *              for execution at a later time
 488  *
 489  *              Get the appropriate address space handler for a newly
 490  *              created region.
 491  *
 492  *              This also performs address space specific initialization. For
 493  *              example, PCI regions must have an _ADR object that contains
 494  *              a PCI address in the scope of the definition. This address is
 495  *              required to perform an access to PCI config space.
 496  *
 497  * MUTEX:       Interpreter should be unlocked, because we may run the _REG
 498  *              method for this region.
 499  *
 500  ******************************************************************************/
 501
 502 acpi_status
 503 acpi_ev_initialize_region(union acpi_operand_object *region_obj,
 504                           u8 acpi_ns_locked)
 505 {
 506         union acpi_operand_object *handler_obj;
 507         union acpi_operand_object *obj_desc;
 508         acpi_adr_space_type space_id;
 509         struct acpi_namespace_node *node;
 510         acpi_status status;
 511
 512         ACPI_FUNCTION_TRACE_U32(ev_initialize_region, acpi_ns_locked);
 513
 514         if (!region_obj) {
 515                 return_ACPI_STATUS(AE_BAD_PARAMETER);
 516         }
 517
 518         if (region_obj->common.flags & AOPOBJ_OBJECT_INITIALIZED) {
 519                 return_ACPI_STATUS(AE_OK);
 520         }
 521
 522         region_obj->common.flags |= AOPOBJ_OBJECT_INITIALIZED;
 523
 524         node = region_obj->region.node->parent;
 525         space_id = region_obj->region.space_id;
 526
 527         /*
 528          * The following loop depends upon the root Node having no parent
 529          * ie: acpi_gbl_root_node->Parent being set to NULL
 530          */
 531         while (node) {
 532
 533                 /* Check to see if a handler exists */
 534
 535                 handler_obj = NULL;
 536                 obj_desc = acpi_ns_get_attached_object(node);
 537                 if (obj_desc) {
 538
 539                         /* Can only be a handler if the object exists */
 540
 541                         switch (node->type) {
 542                         case ACPI_TYPE_DEVICE:
 543                         case ACPI_TYPE_PROCESSOR:
 544                         case ACPI_TYPE_THERMAL:
 545
 546                                 handler_obj = obj_desc->common_notify.handler;
 547                                 break;
 548
 549                         case ACPI_TYPE_METHOD:
 550                                 /*
 551                                  * If we are executing module level code, the original
 552                                  * Node's object was replaced by this Method object and we
 553                                  * saved the handler in the method object.
 554                                  *
 555                                  * See acpi_ns_exec_module_code
 556                                  */
 557                                 if (!acpi_gbl_parse_table_as_term_list &&
 558                                     obj_desc->method.
 559                                     info_flags & ACPI_METHOD_MODULE_LEVEL) {
 560                                         handler_obj =
 561                                             obj_desc->method.dispatch.handler;
 562                                 }
 563                                 break;
 564
 565                         default:
 566
 567                                 /* Ignore other objects */
 568
 569                                 break;
 570                         }
 571
 572                         handler_obj =
 573                             acpi_ev_find_region_handler(space_id, handler_obj);
 574                         if (handler_obj) {
 575
 576                                 /* Found correct handler */
 577
 578                                 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 579                                                   "Found handler %p for region %p in obj %p\n",
 580                                                   handler_obj, region_obj,
 581                                                   obj_desc));
 582
 583                                 status =
 584                                     acpi_ev_attach_region(handler_obj,
 585                                                           region_obj,
 586                                                           acpi_ns_locked);
 587
 588                                 /*
 589                                  * Tell all users that this region is usable by
 590                                  * running the _REG method
 591                                  */
 592                                 if (acpi_ns_locked) {
 593                                         status =
 594                                             acpi_ut_release_mutex
 595                                             (ACPI_MTX_NAMESPACE);
 596                                         if (ACPI_FAILURE(status)) {
 597                                                 return_ACPI_STATUS(status);
 598                                         }
 599                                 }
 600
 601                                 acpi_ex_exit_interpreter();
 602                                 status =
 603                                     acpi_ev_execute_reg_method(region_obj,
 604                                                                ACPI_REG_CONNECT);
 605                                 acpi_ex_enter_interpreter();
 606
 607                                 if (acpi_ns_locked) {
 608                                         status =
 609                                             acpi_ut_acquire_mutex
 610                                             (ACPI_MTX_NAMESPACE);
 611                                         if (ACPI_FAILURE(status)) {
 612                                                 return_ACPI_STATUS(status);
 613                                         }
 614                                 }
 615
 616                                 return_ACPI_STATUS(AE_OK);
 617                         }
 618                 }
 619
 620                 /* This node does not have the handler we need; Pop up one level */
 621
 622                 node = node->parent;
 623         }
 624
 625         /* If we get here, there is no handler for this region */
 626
 627         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
 628                           "No handler for RegionType %s(%X) (RegionObj %p)\n",
 629                           acpi_ut_get_region_name(space_id), space_id,
 630                           region_obj));
 631
 632         return_ACPI_STATUS(AE_NOT_EXIST);
 633 }