Merge branch 'timecounter-next'
[cascardo/linux.git] / drivers / net / wireless / iwlwifi / iwl-trans.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
9  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of version 2 of the GNU General Public License as
13  * published by the Free Software Foundation.
14  *
15  * This program is distributed in the hope that it will be useful, but
16  * WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
23  * USA
24  *
25  * The full GNU General Public License is included in this distribution
26  * in the file called COPYING.
27  *
28  * Contact Information:
29  *  Intel Linux Wireless <ilw@linux.intel.com>
30  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
31  *
32  * BSD LICENSE
33  *
34  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
35  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
36  * All rights reserved.
37  *
38  * Redistribution and use in source and binary forms, with or without
39  * modification, are permitted provided that the following conditions
40  * are met:
41  *
42  *  * Redistributions of source code must retain the above copyright
43  *    notice, this list of conditions and the following disclaimer.
44  *  * Redistributions in binary form must reproduce the above copyright
45  *    notice, this list of conditions and the following disclaimer in
46  *    the documentation and/or other materials provided with the
47  *    distribution.
48  *  * Neither the name Intel Corporation nor the names of its
49  *    contributors may be used to endorse or promote products derived
50  *    from this software without specific prior written permission.
51  *
52  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
53  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
54  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
55  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
56  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
57  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
58  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
59  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
60  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
61  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
62  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
63  *
64  *****************************************************************************/
65 #ifndef __iwl_trans_h__
66 #define __iwl_trans_h__
67
68 #include <linux/ieee80211.h>
69 #include <linux/mm.h> /* for page_address */
70 #include <linux/lockdep.h>
71
72 #include "iwl-debug.h"
73 #include "iwl-config.h"
74 #include "iwl-fw.h"
75 #include "iwl-op-mode.h"
76
77 /**
78  * DOC: Transport layer - what is it ?
79  *
80  * The tranport layer is the layer that deals with the HW directly. It provides
81  * an abstraction of the underlying HW to the upper layer. The transport layer
82  * doesn't provide any policy, algorithm or anything of this kind, but only
83  * mechanisms to make the HW do something.It is not completely stateless but
84  * close to it.
85  * We will have an implementation for each different supported bus.
86  */
87
88 /**
89  * DOC: Life cycle of the transport layer
90  *
91  * The transport layer has a very precise life cycle.
92  *
93  *      1) A helper function is called during the module initialization and
94  *         registers the bus driver's ops with the transport's alloc function.
95  *      2) Bus's probe calls to the transport layer's allocation functions.
96  *         Of course this function is bus specific.
97  *      3) This allocation functions will spawn the upper layer which will
98  *         register mac80211.
99  *
100  *      4) At some point (i.e. mac80211's start call), the op_mode will call
101  *         the following sequence:
102  *         start_hw
103  *         start_fw
104  *
105  *      5) Then when finished (or reset):
106  *         stop_device
107  *
108  *      6) Eventually, the free function will be called.
109  */
110
111 /**
112  * DOC: Host command section
113  *
114  * A host command is a commaned issued by the upper layer to the fw. There are
115  * several versions of fw that have several APIs. The transport layer is
116  * completely agnostic to these differences.
117  * The transport does provide helper functionnality (i.e. SYNC / ASYNC mode),
118  */
119 #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
120 #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
121 #define SEQ_TO_INDEX(s) ((s) & 0xff)
122 #define INDEX_TO_SEQ(i) ((i) & 0xff)
123 #define SEQ_RX_FRAME    cpu_to_le16(0x8000)
124
125 /**
126  * struct iwl_cmd_header
127  *
128  * This header format appears in the beginning of each command sent from the
129  * driver, and each response/notification received from uCode.
130  */
131 struct iwl_cmd_header {
132         u8 cmd;         /* Command ID:  REPLY_RXON, etc. */
133         u8 flags;       /* 0:5 reserved, 6 abort, 7 internal */
134         /*
135          * The driver sets up the sequence number to values of its choosing.
136          * uCode does not use this value, but passes it back to the driver
137          * when sending the response to each driver-originated command, so
138          * the driver can match the response to the command.  Since the values
139          * don't get used by uCode, the driver may set up an arbitrary format.
140          *
141          * There is one exception:  uCode sets bit 15 when it originates
142          * the response/notification, i.e. when the response/notification
143          * is not a direct response to a command sent by the driver.  For
144          * example, uCode issues REPLY_RX when it sends a received frame
145          * to the driver; it is not a direct response to any driver command.
146          *
147          * The Linux driver uses the following format:
148          *
149          *  0:7         tfd index - position within TX queue
150          *  8:12        TX queue id
151          *  13:14       reserved
152          *  15          unsolicited RX or uCode-originated notification
153          */
154         __le16 sequence;
155 } __packed;
156
157 /* iwl_cmd_header flags value */
158 #define IWL_CMD_FAILED_MSK 0x40
159
160
161 #define FH_RSCSR_FRAME_SIZE_MSK         0x00003FFF      /* bits 0-13 */
162 #define FH_RSCSR_FRAME_INVALID          0x55550000
163 #define FH_RSCSR_FRAME_ALIGN            0x40
164
165 struct iwl_rx_packet {
166         /*
167          * The first 4 bytes of the RX frame header contain both the RX frame
168          * size and some flags.
169          * Bit fields:
170          * 31:    flag flush RB request
171          * 30:    flag ignore TC (terminal counter) request
172          * 29:    flag fast IRQ request
173          * 28-14: Reserved
174          * 13-00: RX frame size
175          */
176         __le32 len_n_flags;
177         struct iwl_cmd_header hdr;
178         u8 data[];
179 } __packed;
180
181 static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt)
182 {
183         return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
184 }
185
186 static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
187 {
188         return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr);
189 }
190
191 /**
192  * enum CMD_MODE - how to send the host commands ?
193  *
194  * @CMD_ASYNC: Return right away and don't wait for the response
195  * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
196  *      the response. The caller needs to call iwl_free_resp when done.
197  * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
198  *      command queue, but after other high priority commands. valid only
199  *      with CMD_ASYNC.
200  * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
201  * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
202  * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
203  *      (i.e. mark it as non-idle).
204  */
205 enum CMD_MODE {
206         CMD_ASYNC               = BIT(0),
207         CMD_WANT_SKB            = BIT(1),
208         CMD_SEND_IN_RFKILL      = BIT(2),
209         CMD_HIGH_PRIO           = BIT(3),
210         CMD_SEND_IN_IDLE        = BIT(4),
211         CMD_MAKE_TRANS_IDLE     = BIT(5),
212         CMD_WAKE_UP_TRANS       = BIT(6),
213 };
214
215 #define DEF_CMD_PAYLOAD_SIZE 320
216
217 /**
218  * struct iwl_device_cmd
219  *
220  * For allocation of the command and tx queues, this establishes the overall
221  * size of the largest command we send to uCode, except for commands that
222  * aren't fully copied and use other TFD space.
223  */
224 struct iwl_device_cmd {
225         struct iwl_cmd_header hdr;      /* uCode API */
226         u8 payload[DEF_CMD_PAYLOAD_SIZE];
227 } __packed;
228
229 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
230
231 /*
232  * number of transfer buffers (fragments) per transmit frame descriptor;
233  * this is just the driver's idea, the hardware supports 20
234  */
235 #define IWL_MAX_CMD_TBS_PER_TFD 2
236
237 /**
238  * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
239  *
240  * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
241  *      ring. The transport layer doesn't map the command's buffer to DMA, but
242  *      rather copies it to a previously allocated DMA buffer. This flag tells
243  *      the transport layer not to copy the command, but to map the existing
244  *      buffer (that is passed in) instead. This saves the memcpy and allows
245  *      commands that are bigger than the fixed buffer to be submitted.
246  *      Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
247  * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
248  *      chunk internally and free it again after the command completes. This
249  *      can (currently) be used only once per command.
250  *      Note that a TFD entry after a DUP one cannot be a normal copied one.
251  */
252 enum iwl_hcmd_dataflag {
253         IWL_HCMD_DFL_NOCOPY     = BIT(0),
254         IWL_HCMD_DFL_DUP        = BIT(1),
255 };
256
257 /**
258  * struct iwl_host_cmd - Host command to the uCode
259  *
260  * @data: array of chunks that composes the data of the host command
261  * @resp_pkt: response packet, if %CMD_WANT_SKB was set
262  * @_rx_page_order: (internally used to free response packet)
263  * @_rx_page_addr: (internally used to free response packet)
264  * @handler_status: return value of the handler of the command
265  *      (put in setup_rx_handlers) - valid for SYNC mode only
266  * @flags: can be CMD_*
267  * @len: array of the lengths of the chunks in data
268  * @dataflags: IWL_HCMD_DFL_*
269  * @id: id of the host command
270  */
271 struct iwl_host_cmd {
272         const void *data[IWL_MAX_CMD_TBS_PER_TFD];
273         struct iwl_rx_packet *resp_pkt;
274         unsigned long _rx_page_addr;
275         u32 _rx_page_order;
276         int handler_status;
277
278         u32 flags;
279         u16 len[IWL_MAX_CMD_TBS_PER_TFD];
280         u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
281         u8 id;
282 };
283
284 static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
285 {
286         free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
287 }
288
289 struct iwl_rx_cmd_buffer {
290         struct page *_page;
291         int _offset;
292         bool _page_stolen;
293         u32 _rx_page_order;
294         unsigned int truesize;
295 };
296
297 static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
298 {
299         return (void *)((unsigned long)page_address(r->_page) + r->_offset);
300 }
301
302 static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
303 {
304         return r->_offset;
305 }
306
307 static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
308 {
309         r->_page_stolen = true;
310         get_page(r->_page);
311         return r->_page;
312 }
313
314 static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
315 {
316         __free_pages(r->_page, r->_rx_page_order);
317 }
318
319 #define MAX_NO_RECLAIM_CMDS     6
320
321 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
322
323 /*
324  * Maximum number of HW queues the transport layer
325  * currently supports
326  */
327 #define IWL_MAX_HW_QUEUES               32
328 #define IWL_MAX_TID_COUNT       8
329 #define IWL_FRAME_LIMIT 64
330
331 /**
332  * enum iwl_wowlan_status - WoWLAN image/device status
333  * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
334  * @IWL_D3_STATUS_RESET: device was reset while suspended
335  */
336 enum iwl_d3_status {
337         IWL_D3_STATUS_ALIVE,
338         IWL_D3_STATUS_RESET,
339 };
340
341 /**
342  * enum iwl_trans_status: transport status flags
343  * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
344  * @STATUS_DEVICE_ENABLED: APM is enabled
345  * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
346  * @STATUS_INT_ENABLED: interrupts are enabled
347  * @STATUS_RFKILL: the HW RFkill switch is in KILL position
348  * @STATUS_FW_ERROR: the fw is in error state
349  * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
350  *      are sent
351  * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
352  */
353 enum iwl_trans_status {
354         STATUS_SYNC_HCMD_ACTIVE,
355         STATUS_DEVICE_ENABLED,
356         STATUS_TPOWER_PMI,
357         STATUS_INT_ENABLED,
358         STATUS_RFKILL,
359         STATUS_FW_ERROR,
360         STATUS_TRANS_GOING_IDLE,
361         STATUS_TRANS_IDLE,
362 };
363
364 /**
365  * struct iwl_trans_config - transport configuration
366  *
367  * @op_mode: pointer to the upper layer.
368  * @cmd_queue: the index of the command queue.
369  *      Must be set before start_fw.
370  * @cmd_fifo: the fifo for host commands
371  * @no_reclaim_cmds: Some devices erroneously don't set the
372  *      SEQ_RX_FRAME bit on some notifications, this is the
373  *      list of such notifications to filter. Max length is
374  *      %MAX_NO_RECLAIM_CMDS.
375  * @n_no_reclaim_cmds: # of commands in list
376  * @rx_buf_size_8k: 8 kB RX buffer size needed for A-MSDUs,
377  *      if unset 4k will be the RX buffer size
378  * @bc_table_dword: set to true if the BC table expects the byte count to be
379  *      in DWORD (as opposed to bytes)
380  * @scd_set_active: should the transport configure the SCD for HCMD queue
381  * @queue_watchdog_timeout: time (in ms) after which queues
382  *      are considered stuck and will trigger device restart
383  * @command_names: array of command names, must be 256 entries
384  *      (one for each command); for debugging only
385  */
386 struct iwl_trans_config {
387         struct iwl_op_mode *op_mode;
388
389         u8 cmd_queue;
390         u8 cmd_fifo;
391         const u8 *no_reclaim_cmds;
392         unsigned int n_no_reclaim_cmds;
393
394         bool rx_buf_size_8k;
395         bool bc_table_dword;
396         bool scd_set_active;
397         unsigned int queue_watchdog_timeout;
398         const char *const *command_names;
399 };
400
401 struct iwl_trans_dump_data {
402         u32 len;
403         u8 data[];
404 };
405
406 struct iwl_trans;
407
408 struct iwl_trans_txq_scd_cfg {
409         u8 fifo;
410         s8 sta_id;
411         u8 tid;
412         bool aggregate;
413         int frame_limit;
414 };
415
416 /**
417  * struct iwl_trans_ops - transport specific operations
418  *
419  * All the handlers MUST be implemented
420  *
421  * @start_hw: starts the HW- from that point on, the HW can send interrupts
422  *      May sleep
423  * @op_mode_leave: Turn off the HW RF kill indication if on
424  *      May sleep
425  * @start_fw: allocates and inits all the resources for the transport
426  *      layer. Also kick a fw image.
427  *      May sleep
428  * @fw_alive: called when the fw sends alive notification. If the fw provides
429  *      the SCD base address in SRAM, then provide it here, or 0 otherwise.
430  *      May sleep
431  * @stop_device: stops the whole device (embedded CPU put to reset) and stops
432  *      the HW. From that point on, the HW will be in low power but will still
433  *      issue interrupt if the HW RF kill is triggered. This callback must do
434  *      the right thing and not crash even if start_hw() was called but not
435  *      start_fw(). May sleep
436  * @d3_suspend: put the device into the correct mode for WoWLAN during
437  *      suspend. This is optional, if not implemented WoWLAN will not be
438  *      supported. This callback may sleep.
439  * @d3_resume: resume the device after WoWLAN, enabling the opmode to
440  *      talk to the WoWLAN image to get its status. This is optional, if not
441  *      implemented WoWLAN will not be supported. This callback may sleep.
442  * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
443  *      If RFkill is asserted in the middle of a SYNC host command, it must
444  *      return -ERFKILL straight away.
445  *      May sleep only if CMD_ASYNC is not set
446  * @tx: send an skb
447  *      Must be atomic
448  * @reclaim: free packet until ssn. Returns a list of freed packets.
449  *      Must be atomic
450  * @txq_enable: setup a queue. To setup an AC queue, use the
451  *      iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
452  *      this one. The op_mode must not configure the HCMD queue. The scheduler
453  *      configuration may be %NULL, in which case the hardware will not be
454  *      configured. May sleep.
455  * @txq_disable: de-configure a Tx queue to send AMPDUs
456  *      Must be atomic
457  * @wait_tx_queue_empty: wait until tx queues are empty. May sleep.
458  * @dbgfs_register: add the dbgfs files under this directory. Files will be
459  *      automatically deleted.
460  * @write8: write a u8 to a register at offset ofs from the BAR
461  * @write32: write a u32 to a register at offset ofs from the BAR
462  * @read32: read a u32 register at offset ofs from the BAR
463  * @read_prph: read a DWORD from a periphery register
464  * @write_prph: write a DWORD to a periphery register
465  * @read_mem: read device's SRAM in DWORD
466  * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
467  *      will be zeroed.
468  * @configure: configure parameters required by the transport layer from
469  *      the op_mode. May be called several times before start_fw, can't be
470  *      called after that.
471  * @set_pmi: set the power pmi state
472  * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
473  *      Sleeping is not allowed between grab_nic_access and
474  *      release_nic_access.
475  * @release_nic_access: let the NIC go to sleep. The "flags" parameter
476  *      must be the same one that was sent before to the grab_nic_access.
477  * @set_bits_mask - set SRAM register according to value and mask.
478  * @ref: grab a reference to the transport/FW layers, disallowing
479  *      certain low power states
480  * @unref: release a reference previously taken with @ref. Note that
481  *      initially the reference count is 1, making an initial @unref
482  *      necessary to allow low power states.
483  * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last
484  *      TX'ed commands and similar. The buffer will be vfree'd by the caller.
485  *      Note that the transport must fill in the proper file headers.
486  */
487 struct iwl_trans_ops {
488
489         int (*start_hw)(struct iwl_trans *iwl_trans);
490         void (*op_mode_leave)(struct iwl_trans *iwl_trans);
491         int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
492                         bool run_in_rfkill);
493         int (*update_sf)(struct iwl_trans *trans,
494                          struct iwl_sf_region *st_fwrd_space);
495         void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
496         void (*stop_device)(struct iwl_trans *trans);
497
498         void (*d3_suspend)(struct iwl_trans *trans, bool test);
499         int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
500                          bool test);
501
502         int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
503
504         int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
505                   struct iwl_device_cmd *dev_cmd, int queue);
506         void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
507                         struct sk_buff_head *skbs);
508
509         void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
510                            const struct iwl_trans_txq_scd_cfg *cfg);
511         void (*txq_disable)(struct iwl_trans *trans, int queue,
512                             bool configure_scd);
513
514         int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir);
515         int (*wait_tx_queue_empty)(struct iwl_trans *trans, u32 txq_bm);
516
517         void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
518         void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
519         u32 (*read32)(struct iwl_trans *trans, u32 ofs);
520         u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
521         void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
522         int (*read_mem)(struct iwl_trans *trans, u32 addr,
523                         void *buf, int dwords);
524         int (*write_mem)(struct iwl_trans *trans, u32 addr,
525                          const void *buf, int dwords);
526         void (*configure)(struct iwl_trans *trans,
527                           const struct iwl_trans_config *trans_cfg);
528         void (*set_pmi)(struct iwl_trans *trans, bool state);
529         bool (*grab_nic_access)(struct iwl_trans *trans, bool silent,
530                                 unsigned long *flags);
531         void (*release_nic_access)(struct iwl_trans *trans,
532                                    unsigned long *flags);
533         void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
534                               u32 value);
535         void (*ref)(struct iwl_trans *trans);
536         void (*unref)(struct iwl_trans *trans);
537         void (*suspend)(struct iwl_trans *trans);
538         void (*resume)(struct iwl_trans *trans);
539
540         struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans);
541 };
542
543 /**
544  * enum iwl_trans_state - state of the transport layer
545  *
546  * @IWL_TRANS_NO_FW: no fw has sent an alive response
547  * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
548  */
549 enum iwl_trans_state {
550         IWL_TRANS_NO_FW = 0,
551         IWL_TRANS_FW_ALIVE      = 1,
552 };
553
554 /**
555  * struct iwl_trans - transport common data
556  *
557  * @ops - pointer to iwl_trans_ops
558  * @op_mode - pointer to the op_mode
559  * @cfg - pointer to the configuration
560  * @status: a bit-mask of transport status flags
561  * @dev - pointer to struct device * that represents the device
562  * @hw_id: a u32 with the ID of the device / subdevice.
563  *      Set during transport allocation.
564  * @hw_id_str: a string with info about HW ID. Set during transport allocation.
565  * @pm_support: set to true in start_hw if link pm is supported
566  * @ltr_enabled: set to true if the LTR is enabled
567  * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
568  *      The user should use iwl_trans_{alloc,free}_tx_cmd.
569  * @dev_cmd_headroom: room needed for the transport's private use before the
570  *      device_cmd for Tx - for internal use only
571  *      The user should use iwl_trans_{alloc,free}_tx_cmd.
572  * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
573  *      starting the firmware, used for tracing
574  * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
575  *      start of the 802.11 header in the @rx_mpdu_cmd
576  * @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
577  * @dbg_dest_tlv: points to the destination TLV for debug
578  * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
579  * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
580  */
581 struct iwl_trans {
582         const struct iwl_trans_ops *ops;
583         struct iwl_op_mode *op_mode;
584         const struct iwl_cfg *cfg;
585         enum iwl_trans_state state;
586         unsigned long status;
587
588         struct device *dev;
589         u32 hw_rev;
590         u32 hw_id;
591         char hw_id_str[52];
592
593         u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
594
595         bool pm_support;
596         bool ltr_enabled;
597
598         /* The following fields are internal only */
599         struct kmem_cache *dev_cmd_pool;
600         size_t dev_cmd_headroom;
601         char dev_cmd_pool_name[50];
602
603         struct dentry *dbgfs_dir;
604
605 #ifdef CONFIG_LOCKDEP
606         struct lockdep_map sync_cmd_lockdep_map;
607 #endif
608
609         u64 dflt_pwr_limit;
610
611         const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv;
612         const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_MAX];
613         u8 dbg_dest_reg_num;
614
615         /* pointer to trans specific struct */
616         /*Ensure that this pointer will always be aligned to sizeof pointer */
617         char trans_specific[0] __aligned(sizeof(void *));
618 };
619
620 static inline void iwl_trans_configure(struct iwl_trans *trans,
621                                        const struct iwl_trans_config *trans_cfg)
622 {
623         trans->op_mode = trans_cfg->op_mode;
624
625         trans->ops->configure(trans, trans_cfg);
626 }
627
628 static inline int iwl_trans_start_hw(struct iwl_trans *trans)
629 {
630         might_sleep();
631
632         return trans->ops->start_hw(trans);
633 }
634
635 static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
636 {
637         might_sleep();
638
639         if (trans->ops->op_mode_leave)
640                 trans->ops->op_mode_leave(trans);
641
642         trans->op_mode = NULL;
643
644         trans->state = IWL_TRANS_NO_FW;
645 }
646
647 static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
648 {
649         might_sleep();
650
651         trans->state = IWL_TRANS_FW_ALIVE;
652
653         trans->ops->fw_alive(trans, scd_addr);
654 }
655
656 static inline int iwl_trans_start_fw(struct iwl_trans *trans,
657                                      const struct fw_img *fw,
658                                      bool run_in_rfkill)
659 {
660         might_sleep();
661
662         WARN_ON_ONCE(!trans->rx_mpdu_cmd);
663
664         clear_bit(STATUS_FW_ERROR, &trans->status);
665         return trans->ops->start_fw(trans, fw, run_in_rfkill);
666 }
667
668 static inline int iwl_trans_update_sf(struct iwl_trans *trans,
669                                       struct iwl_sf_region *st_fwrd_space)
670 {
671         might_sleep();
672
673         if (trans->ops->update_sf)
674                 return trans->ops->update_sf(trans, st_fwrd_space);
675
676         return 0;
677 }
678
679 static inline void iwl_trans_stop_device(struct iwl_trans *trans)
680 {
681         might_sleep();
682
683         trans->ops->stop_device(trans);
684
685         trans->state = IWL_TRANS_NO_FW;
686 }
687
688 static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test)
689 {
690         might_sleep();
691         trans->ops->d3_suspend(trans, test);
692 }
693
694 static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
695                                       enum iwl_d3_status *status,
696                                       bool test)
697 {
698         might_sleep();
699         return trans->ops->d3_resume(trans, status, test);
700 }
701
702 static inline void iwl_trans_ref(struct iwl_trans *trans)
703 {
704         if (trans->ops->ref)
705                 trans->ops->ref(trans);
706 }
707
708 static inline void iwl_trans_unref(struct iwl_trans *trans)
709 {
710         if (trans->ops->unref)
711                 trans->ops->unref(trans);
712 }
713
714 static inline void iwl_trans_suspend(struct iwl_trans *trans)
715 {
716         if (trans->ops->suspend)
717                 trans->ops->suspend(trans);
718 }
719
720 static inline void iwl_trans_resume(struct iwl_trans *trans)
721 {
722         if (trans->ops->resume)
723                 trans->ops->resume(trans);
724 }
725
726 static inline struct iwl_trans_dump_data *
727 iwl_trans_dump_data(struct iwl_trans *trans)
728 {
729         if (!trans->ops->dump_data)
730                 return NULL;
731         return trans->ops->dump_data(trans);
732 }
733
734 static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
735                                      struct iwl_host_cmd *cmd)
736 {
737         int ret;
738
739         if (unlikely(!(cmd->flags & CMD_SEND_IN_RFKILL) &&
740                      test_bit(STATUS_RFKILL, &trans->status)))
741                 return -ERFKILL;
742
743         if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
744                 return -EIO;
745
746         if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) {
747                 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
748                 return -EIO;
749         }
750
751         if (!(cmd->flags & CMD_ASYNC))
752                 lock_map_acquire_read(&trans->sync_cmd_lockdep_map);
753
754         ret = trans->ops->send_cmd(trans, cmd);
755
756         if (!(cmd->flags & CMD_ASYNC))
757                 lock_map_release(&trans->sync_cmd_lockdep_map);
758
759         return ret;
760 }
761
762 static inline struct iwl_device_cmd *
763 iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
764 {
765         u8 *dev_cmd_ptr = kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
766
767         if (unlikely(dev_cmd_ptr == NULL))
768                 return NULL;
769
770         return (struct iwl_device_cmd *)
771                         (dev_cmd_ptr + trans->dev_cmd_headroom);
772 }
773
774 static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
775                                          struct iwl_device_cmd *dev_cmd)
776 {
777         u8 *dev_cmd_ptr = (u8 *)dev_cmd - trans->dev_cmd_headroom;
778
779         kmem_cache_free(trans->dev_cmd_pool, dev_cmd_ptr);
780 }
781
782 static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
783                                struct iwl_device_cmd *dev_cmd, int queue)
784 {
785         if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
786                 return -EIO;
787
788         if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
789                 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
790
791         return trans->ops->tx(trans, skb, dev_cmd, queue);
792 }
793
794 static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
795                                      int ssn, struct sk_buff_head *skbs)
796 {
797         if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
798                 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
799
800         trans->ops->reclaim(trans, queue, ssn, skbs);
801 }
802
803 static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
804                                          bool configure_scd)
805 {
806         trans->ops->txq_disable(trans, queue, configure_scd);
807 }
808
809 static inline void
810 iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
811                          const struct iwl_trans_txq_scd_cfg *cfg)
812 {
813         might_sleep();
814
815         if (unlikely((trans->state != IWL_TRANS_FW_ALIVE)))
816                 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
817
818         trans->ops->txq_enable(trans, queue, ssn, cfg);
819 }
820
821 static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
822                                         int fifo, int sta_id, int tid,
823                                         int frame_limit, u16 ssn)
824 {
825         struct iwl_trans_txq_scd_cfg cfg = {
826                 .fifo = fifo,
827                 .sta_id = sta_id,
828                 .tid = tid,
829                 .frame_limit = frame_limit,
830                 .aggregate = sta_id >= 0,
831         };
832
833         iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg);
834 }
835
836 static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue,
837                                            int fifo)
838 {
839         struct iwl_trans_txq_scd_cfg cfg = {
840                 .fifo = fifo,
841                 .sta_id = -1,
842                 .tid = IWL_MAX_TID_COUNT,
843                 .frame_limit = IWL_FRAME_LIMIT,
844                 .aggregate = false,
845         };
846
847         iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg);
848 }
849
850 static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans,
851                                                 u32 txq_bm)
852 {
853         if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
854                 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
855
856         return trans->ops->wait_tx_queue_empty(trans, txq_bm);
857 }
858
859 static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans,
860                                            struct dentry *dir)
861 {
862         return trans->ops->dbgfs_register(trans, dir);
863 }
864
865 static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
866 {
867         trans->ops->write8(trans, ofs, val);
868 }
869
870 static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
871 {
872         trans->ops->write32(trans, ofs, val);
873 }
874
875 static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
876 {
877         return trans->ops->read32(trans, ofs);
878 }
879
880 static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
881 {
882         return trans->ops->read_prph(trans, ofs);
883 }
884
885 static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
886                                         u32 val)
887 {
888         return trans->ops->write_prph(trans, ofs, val);
889 }
890
891 static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
892                                      void *buf, int dwords)
893 {
894         return trans->ops->read_mem(trans, addr, buf, dwords);
895 }
896
897 #define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize)                   \
898         do {                                                                  \
899                 if (__builtin_constant_p(bufsize))                            \
900                         BUILD_BUG_ON((bufsize) % sizeof(u32));                \
901                 iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
902         } while (0)
903
904 static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
905 {
906         u32 value;
907
908         if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1)))
909                 return 0xa5a5a5a5;
910
911         return value;
912 }
913
914 static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
915                                       const void *buf, int dwords)
916 {
917         return trans->ops->write_mem(trans, addr, buf, dwords);
918 }
919
920 static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
921                                         u32 val)
922 {
923         return iwl_trans_write_mem(trans, addr, &val, 1);
924 }
925
926 static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
927 {
928         if (trans->ops->set_pmi)
929                 trans->ops->set_pmi(trans, state);
930 }
931
932 static inline void
933 iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
934 {
935         trans->ops->set_bits_mask(trans, reg, mask, value);
936 }
937
938 #define iwl_trans_grab_nic_access(trans, silent, flags) \
939         __cond_lock(nic_access,                         \
940                     likely((trans)->ops->grab_nic_access(trans, silent, flags)))
941
942 static inline void __releases(nic_access)
943 iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
944 {
945         trans->ops->release_nic_access(trans, flags);
946         __release(nic_access);
947 }
948
949 static inline void iwl_trans_fw_error(struct iwl_trans *trans)
950 {
951         if (WARN_ON_ONCE(!trans->op_mode))
952                 return;
953
954         /* prevent double restarts due to the same erroneous FW */
955         if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
956                 iwl_op_mode_nic_error(trans->op_mode);
957 }
958
959 /*****************************************************
960 * driver (transport) register/unregister functions
961 ******************************************************/
962 int __must_check iwl_pci_register_driver(void);
963 void iwl_pci_unregister_driver(void);
964
965 static inline void trans_lockdep_init(struct iwl_trans *trans)
966 {
967 #ifdef CONFIG_LOCKDEP
968         static struct lock_class_key __key;
969
970         lockdep_init_map(&trans->sync_cmd_lockdep_map, "sync_cmd_lockdep_map",
971                          &__key, 0);
972 #endif
973 }
974
975 #endif /* __iwl_trans_h__ */