drivers/net/wireless/iwlwifi/pcie/rx.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
   4  * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
   5  *
   6  * Portions of this file are derived from the ipw3945 project, as well
   7  * as portions of the ieee80211 subsystem header files.
   8  *
   9  * This program is free software; you can redistribute it and/or modify it
  10  * under the terms of version 2 of the GNU General Public License as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but WITHOUT
  14  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  15  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  16  * more details.
  17  *
  18  * You should have received a copy of the GNU General Public License along with
  19  * this program; if not, write to the Free Software Foundation, Inc.,
  20  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  21  *
  22  * The full GNU General Public License is included in this distribution in the
  23  * file called LICENSE.
  24  *
  25  * Contact Information:
  26  *  Intel Linux Wireless <ilw@linux.intel.com>
  27  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  28  *
  29  *****************************************************************************/
  30 #include <linux/sched.h>
  31 #include <linux/wait.h>
  32 #include <linux/gfp.h>
  33
  34 #include "iwl-prph.h"
  35 #include "iwl-io.h"
  36 #include "internal.h"
  37 #include "iwl-op-mode.h"
  38
  39 /******************************************************************************
  40  *
  41  * RX path functions
  42  *
  43  ******************************************************************************/
  44
  45 /*
  46  * Rx theory of operation
  47  *
  48  * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
  49  * each of which point to Receive Buffers to be filled by the NIC.  These get
  50  * used not only for Rx frames, but for any command response or notification
  51  * from the NIC.  The driver and NIC manage the Rx buffers by means
  52  * of indexes into the circular buffer.
  53  *
  54  * Rx Queue Indexes
  55  * The host/firmware share two index registers for managing the Rx buffers.
  56  *
  57  * The READ index maps to the first position that the firmware may be writing
  58  * to -- the driver can read up to (but not including) this position and get
  59  * good data.
  60  * The READ index is managed by the firmware once the card is enabled.
  61  *
  62  * The WRITE index maps to the last position the driver has read from -- the
  63  * position preceding WRITE is the last slot the firmware can place a packet.
  64  *
  65  * The queue is empty (no good data) if WRITE = READ - 1, and is full if
  66  * WRITE = READ.
  67  *
  68  * During initialization, the host sets up the READ queue position to the first
  69  * INDEX position, and WRITE to the last (READ - 1 wrapped)
  70  *
  71  * When the firmware places a packet in a buffer, it will advance the READ index
  72  * and fire the RX interrupt.  The driver can then query the READ index and
  73  * process as many packets as possible, moving the WRITE index forward as it
  74  * resets the Rx queue buffers with new memory.
  75  *
  76  * The management in the driver is as follows:
  77  * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
  78  *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
  79  *   to replenish the iwl->rxq->rx_free.
  80  * + In iwl_pcie_rx_replenish (scheduled) if 'processed' != 'read' then the
  81  *   iwl->rxq is replenished and the READ INDEX is updated (updating the
  82  *   'processed' and 'read' driver indexes as well)
  83  * + A received packet is processed and handed to the kernel network stack,
  84  *   detached from the iwl->rxq.  The driver 'processed' index is updated.
  85  * + The Host/Firmware iwl->rxq is replenished at irq thread time from the
  86  *   rx_free list. If there are no allocated buffers in iwl->rxq->rx_free,
  87  *   the READ INDEX is not incremented and iwl->status(RX_STALLED) is set.
  88  *   If there were enough free buffers and RX_STALLED is set it is cleared.
  89  *
  90  *
  91  * Driver sequence:
  92  *
  93  * iwl_rxq_alloc()            Allocates rx_free
  94  * iwl_pcie_rx_replenish()    Replenishes rx_free list from rx_used, and calls
  95  *                            iwl_pcie_rxq_restock
  96  * iwl_pcie_rxq_restock()     Moves available buffers from rx_free into Rx
  97  *                            queue, updates firmware pointers, and updates
  98  *                            the WRITE index.  If insufficient rx_free buffers
  99  *                            are available, schedules iwl_pcie_rx_replenish
 100  *
 101  * -- enable interrupts --
 102  * ISR - iwl_rx()             Detach iwl_rx_mem_buffers from pool up to the
 103  *                            READ INDEX, detaching the SKB from the pool.
 104  *                            Moves the packet buffer from queue to rx_used.
 105  *                            Calls iwl_pcie_rxq_restock to refill any empty
 106  *                            slots.
 107  * ...
 108  *
 109  */
 110
 111 /*
 112  * iwl_rxq_space - Return number of free slots available in queue.
 113  */
 114 static int iwl_rxq_space(const struct iwl_rxq *rxq)
 115 {
 116         /* Make sure RX_QUEUE_SIZE is a power of 2 */
 117         BUILD_BUG_ON(RX_QUEUE_SIZE & (RX_QUEUE_SIZE - 1));
 118
 119         /*
 120          * There can be up to (RX_QUEUE_SIZE - 1) free slots, to avoid ambiguity
 121          * between empty and completely full queues.
 122          * The following is equivalent to modulo by RX_QUEUE_SIZE and is well
 123          * defined for negative dividends.
 124          */
 125         return (rxq->read - rxq->write - 1) & (RX_QUEUE_SIZE - 1);
 126 }
 127
 128 /*
 129  * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
 130  */
 131 static inline __le32 iwl_pcie_dma_addr2rbd_ptr(dma_addr_t dma_addr)
 132 {
 133         return cpu_to_le32((u32)(dma_addr >> 8));
 134 }
 135
 136 /*
 137  * iwl_pcie_rx_stop - stops the Rx DMA
 138  */
 139 int iwl_pcie_rx_stop(struct iwl_trans *trans)
 140 {
 141         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 142         return iwl_poll_direct_bit(trans, FH_MEM_RSSR_RX_STATUS_REG,
 143                                    FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
 144 }
 145
 146 /*
 147  * iwl_pcie_rxq_inc_wr_ptr - Update the write pointer for the RX queue
 148  */
 149 static void iwl_pcie_rxq_inc_wr_ptr(struct iwl_trans *trans)
 150 {
 151         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 152         struct iwl_rxq *rxq = &trans_pcie->rxq;
 153         u32 reg;
 154
 155         lockdep_assert_held(&rxq->lock);
 156
 157         /*
 158          * explicitly wake up the NIC if:
 159          * 1. shadow registers aren't enabled
 160          * 2. there is a chance that the NIC is asleep
 161          */
 162         if (!trans->cfg->base_params->shadow_reg_enable &&
 163             test_bit(STATUS_TPOWER_PMI, &trans->status)) {
 164                 reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
 165
 166                 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
 167                         IWL_DEBUG_INFO(trans, "Rx queue requesting wakeup, GP1 = 0x%x\n",
 168                                        reg);
 169                         iwl_set_bit(trans, CSR_GP_CNTRL,
 170                                     CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 171                         rxq->need_update = true;
 172                         return;
 173                 }
 174         }
 175
 176         rxq->write_actual = round_down(rxq->write, 8);
 177         iwl_write32(trans, FH_RSCSR_CHNL0_WPTR, rxq->write_actual);
 178 }
 179
 180 static void iwl_pcie_rxq_check_wrptr(struct iwl_trans *trans)
 181 {
 182         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 183         struct iwl_rxq *rxq = &trans_pcie->rxq;
 184
 185         spin_lock(&rxq->lock);
 186
 187         if (!rxq->need_update)
 188                 goto exit_unlock;
 189
 190         iwl_pcie_rxq_inc_wr_ptr(trans);
 191         rxq->need_update = false;
 192
 193  exit_unlock:
 194         spin_unlock(&rxq->lock);
 195 }
 196
 197 /*
 198  * iwl_pcie_rxq_restock - refill RX queue from pre-allocated pool
 199  *
 200  * If there are slots in the RX queue that need to be restocked,
 201  * and we have free pre-allocated buffers, fill the ranks as much
 202  * as we can, pulling from rx_free.
 203  *
 204  * This moves the 'write' index forward to catch up with 'processed', and
 205  * also updates the memory address in the firmware to reference the new
 206  * target buffer.
 207  */
 208 static void iwl_pcie_rxq_restock(struct iwl_trans *trans)
 209 {
 210         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 211         struct iwl_rxq *rxq = &trans_pcie->rxq;
 212         struct iwl_rx_mem_buffer *rxb;
 213
 214         /*
 215          * If the device isn't enabled - not need to try to add buffers...
 216          * This can happen when we stop the device and still have an interrupt
 217          * pending. We stop the APM before we sync the interrupts because we
 218          * have to (see comment there). On the other hand, since the APM is
 219          * stopped, we cannot access the HW (in particular not prph).
 220          * So don't try to restock if the APM has been already stopped.
 221          */
 222         if (!test_bit(STATUS_DEVICE_ENABLED, &trans->status))
 223                 return;
 224
 225         spin_lock(&rxq->lock);
 226         while ((iwl_rxq_space(rxq) > 0) && (rxq->free_count)) {
 227                 /* The overwritten rxb must be a used one */
 228                 rxb = rxq->queue[rxq->write];
 229                 BUG_ON(rxb && rxb->page);
 230
 231                 /* Get next free Rx buffer, remove from free list */
 232                 rxb = list_first_entry(&rxq->rx_free, struct iwl_rx_mem_buffer,
 233                                        list);
 234                 list_del(&rxb->list);
 235
 236                 /* Point to Rx buffer via next RBD in circular buffer */
 237                 rxq->bd[rxq->write] = iwl_pcie_dma_addr2rbd_ptr(rxb->page_dma);
 238                 rxq->queue[rxq->write] = rxb;
 239                 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 240                 rxq->free_count--;
 241         }
 242         spin_unlock(&rxq->lock);
 243         /* If the pre-allocated buffer pool is dropping low, schedule to
 244          * refill it */
 245         if (rxq->free_count <= RX_LOW_WATERMARK)
 246                 schedule_work(&trans_pcie->rx_replenish);
 247
 248         /* If we've added more space for the firmware to place data, tell it.
 249          * Increment device's write pointer in multiples of 8. */
 250         if (rxq->write_actual != (rxq->write & ~0x7)) {
 251                 spin_lock(&rxq->lock);
 252                 iwl_pcie_rxq_inc_wr_ptr(trans);
 253                 spin_unlock(&rxq->lock);
 254         }
 255 }
 256
 257 /*
 258  * iwl_pcie_rxq_alloc_rbs - allocate a page for each used RBD
 259  *
 260  * A used RBD is an Rx buffer that has been given to the stack. To use it again
 261  * a page must be allocated and the RBD must point to the page. This function
 262  * doesn't change the HW pointer but handles the list of pages that is used by
 263  * iwl_pcie_rxq_restock. The latter function will update the HW to use the newly
 264  * allocated buffers.
 265  */
 266 static void iwl_pcie_rxq_alloc_rbs(struct iwl_trans *trans, gfp_t priority)
 267 {
 268         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 269         struct iwl_rxq *rxq = &trans_pcie->rxq;
 270         struct iwl_rx_mem_buffer *rxb;
 271         struct page *page;
 272         gfp_t gfp_mask = priority;
 273
 274         while (1) {
 275                 spin_lock(&rxq->lock);
 276                 if (list_empty(&rxq->rx_used)) {
 277                         spin_unlock(&rxq->lock);
 278                         return;
 279                 }
 280                 spin_unlock(&rxq->lock);
 281
 282                 if (rxq->free_count > RX_LOW_WATERMARK)
 283                         gfp_mask |= __GFP_NOWARN;
 284
 285                 if (trans_pcie->rx_page_order > 0)
 286                         gfp_mask |= __GFP_COMP;
 287
 288                 /* Alloc a new receive buffer */
 289                 page = alloc_pages(gfp_mask, trans_pcie->rx_page_order);
 290                 if (!page) {
 291                         if (net_ratelimit())
 292                                 IWL_DEBUG_INFO(trans, "alloc_pages failed, "
 293                                            "order: %d\n",
 294                                            trans_pcie->rx_page_order);
 295
 296                         if ((rxq->free_count <= RX_LOW_WATERMARK) &&
 297                             net_ratelimit())
 298                                 IWL_CRIT(trans, "Failed to alloc_pages with %s."
 299                                          "Only %u free buffers remaining.\n",
 300                                          priority == GFP_ATOMIC ?
 301                                          "GFP_ATOMIC" : "GFP_KERNEL",
 302                                          rxq->free_count);
 303                         /* We don't reschedule replenish work here -- we will
 304                          * call the restock method and if it still needs
 305                          * more buffers it will schedule replenish */
 306                         return;
 307                 }
 308
 309                 spin_lock(&rxq->lock);
 310
 311                 if (list_empty(&rxq->rx_used)) {
 312                         spin_unlock(&rxq->lock);
 313                         __free_pages(page, trans_pcie->rx_page_order);
 314                         return;
 315                 }
 316                 rxb = list_first_entry(&rxq->rx_used, struct iwl_rx_mem_buffer,
 317                                        list);
 318                 list_del(&rxb->list);
 319                 spin_unlock(&rxq->lock);
 320
 321                 BUG_ON(rxb->page);
 322                 rxb->page = page;
 323                 /* Get physical address of the RB */
 324                 rxb->page_dma =
 325                         dma_map_page(trans->dev, page, 0,
 326                                      PAGE_SIZE << trans_pcie->rx_page_order,
 327                                      DMA_FROM_DEVICE);
 328                 if (dma_mapping_error(trans->dev, rxb->page_dma)) {
 329                         rxb->page = NULL;
 330                         spin_lock(&rxq->lock);
 331                         list_add(&rxb->list, &rxq->rx_used);
 332                         spin_unlock(&rxq->lock);
 333                         __free_pages(page, trans_pcie->rx_page_order);
 334                         return;
 335                 }
 336                 /* dma address must be no more than 36 bits */
 337                 BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
 338                 /* and also 256 byte aligned! */
 339                 BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
 340
 341                 spin_lock(&rxq->lock);
 342
 343                 list_add_tail(&rxb->list, &rxq->rx_free);
 344                 rxq->free_count++;
 345
 346                 spin_unlock(&rxq->lock);
 347         }
 348 }
 349
 350 static void iwl_pcie_rxq_free_rbs(struct iwl_trans *trans)
 351 {
 352         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 353         struct iwl_rxq *rxq = &trans_pcie->rxq;
 354         int i;
 355
 356         lockdep_assert_held(&rxq->lock);
 357
 358         for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
 359                 if (!rxq->pool[i].page)
 360                         continue;
 361                 dma_unmap_page(trans->dev, rxq->pool[i].page_dma,
 362                                PAGE_SIZE << trans_pcie->rx_page_order,
 363                                DMA_FROM_DEVICE);
 364                 __free_pages(rxq->pool[i].page, trans_pcie->rx_page_order);
 365                 rxq->pool[i].page = NULL;
 366         }
 367 }
 368
 369 /*
 370  * iwl_pcie_rx_replenish - Move all used buffers from rx_used to rx_free
 371  *
 372  * When moving to rx_free an page is allocated for the slot.
 373  *
 374  * Also restock the Rx queue via iwl_pcie_rxq_restock.
 375  * This is called as a scheduled work item (except for during initialization)
 376  */
 377 static void iwl_pcie_rx_replenish(struct iwl_trans *trans, gfp_t gfp)
 378 {
 379         iwl_pcie_rxq_alloc_rbs(trans, gfp);
 380
 381         iwl_pcie_rxq_restock(trans);
 382 }
 383
 384 static void iwl_pcie_rx_replenish_work(struct work_struct *data)
 385 {
 386         struct iwl_trans_pcie *trans_pcie =
 387             container_of(data, struct iwl_trans_pcie, rx_replenish);
 388
 389         iwl_pcie_rx_replenish(trans_pcie->trans, GFP_KERNEL);
 390 }
 391
 392 static int iwl_pcie_rx_alloc(struct iwl_trans *trans)
 393 {
 394         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 395         struct iwl_rxq *rxq = &trans_pcie->rxq;
 396         struct device *dev = trans->dev;
 397
 398         memset(&trans_pcie->rxq, 0, sizeof(trans_pcie->rxq));
 399
 400         spin_lock_init(&rxq->lock);
 401
 402         if (WARN_ON(rxq->bd || rxq->rb_stts))
 403                 return -EINVAL;
 404
 405         /* Allocate the circular buffer of Read Buffer Descriptors (RBDs) */
 406         rxq->bd = dma_zalloc_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE,
 407                                       &rxq->bd_dma, GFP_KERNEL);
 408         if (!rxq->bd)
 409                 goto err_bd;
 410
 411         /*Allocate the driver's pointer to receive buffer status */
 412         rxq->rb_stts = dma_zalloc_coherent(dev, sizeof(*rxq->rb_stts),
 413                                            &rxq->rb_stts_dma, GFP_KERNEL);
 414         if (!rxq->rb_stts)
 415                 goto err_rb_stts;
 416
 417         return 0;
 418
 419 err_rb_stts:
 420         dma_free_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE,
 421                           rxq->bd, rxq->bd_dma);
 422         rxq->bd_dma = 0;
 423         rxq->bd = NULL;
 424 err_bd:
 425         return -ENOMEM;
 426 }
 427
 428 static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq)
 429 {
 430         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 431         u32 rb_size;
 432         const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
 433
 434         if (trans_pcie->rx_buf_size_8k)
 435                 rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
 436         else
 437                 rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
 438
 439         /* Stop Rx DMA */
 440         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
 441         /* reset and flush pointers */
 442         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_RBDCB_WPTR, 0);
 443         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ, 0);
 444         iwl_write_direct32(trans, FH_RSCSR_CHNL0_RDPTR, 0);
 445
 446         /* Reset driver's Rx queue write index */
 447         iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
 448
 449         /* Tell device where to find RBD circular buffer in DRAM */
 450         iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
 451                            (u32)(rxq->bd_dma >> 8));
 452
 453         /* Tell device where in DRAM to update its Rx status */
 454         iwl_write_direct32(trans, FH_RSCSR_CHNL0_STTS_WPTR_REG,
 455                            rxq->rb_stts_dma >> 4);
 456
 457         /* Enable Rx DMA
 458          * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
 459          *      the credit mechanism in 5000 HW RX FIFO
 460          * Direct rx interrupts to hosts
 461          * Rx buffer size 4 or 8k
 462          * RB timeout 0x10
 463          * 256 RBDs
 464          */
 465         iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG,
 466                            FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
 467                            FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
 468                            FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
 469                            rb_size|
 470                            (RX_RB_TIMEOUT << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
 471                            (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
 472
 473         /* Set interrupt coalescing timer to default (2048 usecs) */
 474         iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
 475
 476         /* W/A for interrupt coalescing bug in 7260 and 3160 */
 477         if (trans->cfg->host_interrupt_operation_mode)
 478                 iwl_set_bit(trans, CSR_INT_COALESCING, IWL_HOST_INT_OPER_MODE);
 479 }
 480
 481 static void iwl_pcie_rx_init_rxb_lists(struct iwl_rxq *rxq)
 482 {
 483         int i;
 484
 485         lockdep_assert_held(&rxq->lock);
 486
 487         INIT_LIST_HEAD(&rxq->rx_free);
 488         INIT_LIST_HEAD(&rxq->rx_used);
 489         rxq->free_count = 0;
 490
 491         for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
 492                 list_add(&rxq->pool[i].list, &rxq->rx_used);
 493 }
 494
 495 int iwl_pcie_rx_init(struct iwl_trans *trans)
 496 {
 497         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 498         struct iwl_rxq *rxq = &trans_pcie->rxq;
 499         int i, err;
 500
 501         if (!rxq->bd) {
 502                 err = iwl_pcie_rx_alloc(trans);
 503                 if (err)
 504                         return err;
 505         }
 506
 507         spin_lock(&rxq->lock);
 508
 509         INIT_WORK(&trans_pcie->rx_replenish, iwl_pcie_rx_replenish_work);
 510
 511         /* free all first - we might be reconfigured for a different size */
 512         iwl_pcie_rxq_free_rbs(trans);
 513         iwl_pcie_rx_init_rxb_lists(rxq);
 514
 515         for (i = 0; i < RX_QUEUE_SIZE; i++)
 516                 rxq->queue[i] = NULL;
 517
 518         /* Set us so that we have processed and used all buffers, but have
 519          * not restocked the Rx queue with fresh buffers */
 520         rxq->read = rxq->write = 0;
 521         rxq->write_actual = 0;
 522         memset(rxq->rb_stts, 0, sizeof(*rxq->rb_stts));
 523         spin_unlock(&rxq->lock);
 524
 525         iwl_pcie_rx_replenish(trans, GFP_KERNEL);
 526
 527         iwl_pcie_rx_hw_init(trans, rxq);
 528
 529         spin_lock(&rxq->lock);
 530         iwl_pcie_rxq_inc_wr_ptr(trans);
 531         spin_unlock(&rxq->lock);
 532
 533         return 0;
 534 }
 535
 536 void iwl_pcie_rx_free(struct iwl_trans *trans)
 537 {
 538         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 539         struct iwl_rxq *rxq = &trans_pcie->rxq;
 540
 541         /*if rxq->bd is NULL, it means that nothing has been allocated,
 542          * exit now */
 543         if (!rxq->bd) {
 544                 IWL_DEBUG_INFO(trans, "Free NULL rx context\n");
 545                 return;
 546         }
 547
 548         cancel_work_sync(&trans_pcie->rx_replenish);
 549
 550         spin_lock(&rxq->lock);
 551         iwl_pcie_rxq_free_rbs(trans);
 552         spin_unlock(&rxq->lock);
 553
 554         dma_free_coherent(trans->dev, sizeof(__le32) * RX_QUEUE_SIZE,
 555                           rxq->bd, rxq->bd_dma);
 556         rxq->bd_dma = 0;
 557         rxq->bd = NULL;
 558
 559         if (rxq->rb_stts)
 560                 dma_free_coherent(trans->dev,
 561                                   sizeof(struct iwl_rb_status),
 562                                   rxq->rb_stts, rxq->rb_stts_dma);
 563         else
 564                 IWL_DEBUG_INFO(trans, "Free rxq->rb_stts which is NULL\n");
 565         rxq->rb_stts_dma = 0;
 566         rxq->rb_stts = NULL;
 567 }
 568
 569 static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
 570                                 struct iwl_rx_mem_buffer *rxb)
 571 {
 572         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 573         struct iwl_rxq *rxq = &trans_pcie->rxq;
 574         struct iwl_txq *txq = &trans_pcie->txq[trans_pcie->cmd_queue];
 575         bool page_stolen = false;
 576         int max_len = PAGE_SIZE << trans_pcie->rx_page_order;
 577         u32 offset = 0;
 578
 579         if (WARN_ON(!rxb))
 580                 return;
 581
 582         dma_unmap_page(trans->dev, rxb->page_dma, max_len, DMA_FROM_DEVICE);
 583
 584         while (offset + sizeof(u32) + sizeof(struct iwl_cmd_header) < max_len) {
 585                 struct iwl_rx_packet *pkt;
 586                 struct iwl_device_cmd *cmd;
 587                 u16 sequence;
 588                 bool reclaim;
 589                 int index, cmd_index, err, len;
 590                 struct iwl_rx_cmd_buffer rxcb = {
 591                         ._offset = offset,
 592                         ._rx_page_order = trans_pcie->rx_page_order,
 593                         ._page = rxb->page,
 594                         ._page_stolen = false,
 595                         .truesize = max_len,
 596                 };
 597
 598                 pkt = rxb_addr(&rxcb);
 599
 600                 if (pkt->len_n_flags == cpu_to_le32(FH_RSCSR_FRAME_INVALID))
 601                         break;
 602
 603                 IWL_DEBUG_RX(trans, "cmd at offset %d: %s (0x%.2x)\n",
 604                         rxcb._offset, get_cmd_string(trans_pcie, pkt->hdr.cmd),
 605                         pkt->hdr.cmd);
 606
 607                 len = iwl_rx_packet_len(pkt);
 608                 len += sizeof(u32); /* account for status word */
 609                 trace_iwlwifi_dev_rx(trans->dev, trans, pkt, len);
 610                 trace_iwlwifi_dev_rx_data(trans->dev, trans, pkt, len);
 611
 612                 /* Reclaim a command buffer only if this packet is a response
 613                  *   to a (driver-originated) command.
 614                  * If the packet (e.g. Rx frame) originated from uCode,
 615                  *   there is no command buffer to reclaim.
 616                  * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
 617                  *   but apparently a few don't get set; catch them here. */
 618                 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME);
 619                 if (reclaim) {
 620                         int i;
 621
 622                         for (i = 0; i < trans_pcie->n_no_reclaim_cmds; i++) {
 623                                 if (trans_pcie->no_reclaim_cmds[i] ==
 624                                                         pkt->hdr.cmd) {
 625                                         reclaim = false;
 626                                         break;
 627                                 }
 628                         }
 629                 }
 630
 631                 sequence = le16_to_cpu(pkt->hdr.sequence);
 632                 index = SEQ_TO_INDEX(sequence);
 633                 cmd_index = get_cmd_index(&txq->q, index);
 634
 635                 if (reclaim)
 636                         cmd = txq->entries[cmd_index].cmd;
 637                 else
 638                         cmd = NULL;
 639
 640                 err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd);
 641
 642                 if (reclaim) {
 643                         kzfree(txq->entries[cmd_index].free_buf);
 644                         txq->entries[cmd_index].free_buf = NULL;
 645                 }
 646
 647                 /*
 648                  * After here, we should always check rxcb._page_stolen,
 649                  * if it is true then one of the handlers took the page.
 650                  */
 651
 652                 if (reclaim) {
 653                         /* Invoke any callbacks, transfer the buffer to caller,
 654                          * and fire off the (possibly) blocking
 655                          * iwl_trans_send_cmd()
 656                          * as we reclaim the driver command queue */
 657                         if (!rxcb._page_stolen)
 658                                 iwl_pcie_hcmd_complete(trans, &rxcb, err);
 659                         else
 660                                 IWL_WARN(trans, "Claim null rxb?\n");
 661                 }
 662
 663                 page_stolen |= rxcb._page_stolen;
 664                 offset += ALIGN(len, FH_RSCSR_FRAME_ALIGN);
 665         }
 666
 667         /* page was stolen from us -- free our reference */
 668         if (page_stolen) {
 669                 __free_pages(rxb->page, trans_pcie->rx_page_order);
 670                 rxb->page = NULL;
 671         }
 672
 673         /* Reuse the page if possible. For notification packets and
 674          * SKBs that fail to Rx correctly, add them back into the
 675          * rx_free list for reuse later. */
 676         if (rxb->page != NULL) {
 677                 rxb->page_dma =
 678                         dma_map_page(trans->dev, rxb->page, 0,
 679                                      PAGE_SIZE << trans_pcie->rx_page_order,
 680                                      DMA_FROM_DEVICE);
 681                 if (dma_mapping_error(trans->dev, rxb->page_dma)) {
 682                         /*
 683                          * free the page(s) as well to not break
 684                          * the invariant that the items on the used
 685                          * list have no page(s)
 686                          */
 687                         __free_pages(rxb->page, trans_pcie->rx_page_order);
 688                         rxb->page = NULL;
 689                         list_add_tail(&rxb->list, &rxq->rx_used);
 690                 } else {
 691                         list_add_tail(&rxb->list, &rxq->rx_free);
 692                         rxq->free_count++;
 693                 }
 694         } else
 695                 list_add_tail(&rxb->list, &rxq->rx_used);
 696 }
 697
 698 /*
 699  * iwl_pcie_rx_handle - Main entry function for receiving responses from fw
 700  */
 701 static void iwl_pcie_rx_handle(struct iwl_trans *trans)
 702 {
 703         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 704         struct iwl_rxq *rxq = &trans_pcie->rxq;
 705         u32 r, i;
 706         u8 fill_rx = 0;
 707         u32 count = 8;
 708         int total_empty;
 709
 710 restart:
 711         spin_lock(&rxq->lock);
 712         /* uCode's read index (stored in shared DRAM) indicates the last Rx
 713          * buffer that the driver may process (last buffer filled by ucode). */
 714         r = le16_to_cpu(ACCESS_ONCE(rxq->rb_stts->closed_rb_num)) & 0x0FFF;
 715         i = rxq->read;
 716
 717         /* Rx interrupt, but nothing sent from uCode */
 718         if (i == r)
 719                 IWL_DEBUG_RX(trans, "HW = SW = %d\n", r);
 720
 721         /* calculate total frames need to be restock after handling RX */
 722         total_empty = r - rxq->write_actual;
 723         if (total_empty < 0)
 724                 total_empty += RX_QUEUE_SIZE;
 725
 726         if (total_empty > (RX_QUEUE_SIZE / 2))
 727                 fill_rx = 1;
 728
 729         while (i != r) {
 730                 struct iwl_rx_mem_buffer *rxb;
 731
 732                 rxb = rxq->queue[i];
 733                 rxq->queue[i] = NULL;
 734
 735                 IWL_DEBUG_RX(trans, "rxbuf: HW = %d, SW = %d (%p)\n",
 736                              r, i, rxb);
 737                 iwl_pcie_rx_handle_rb(trans, rxb);
 738
 739                 i = (i + 1) & RX_QUEUE_MASK;
 740                 /* If there are a lot of unused frames,
 741                  * restock the Rx queue so ucode wont assert. */
 742                 if (fill_rx) {
 743                         count++;
 744                         if (count >= 8) {
 745                                 rxq->read = i;
 746                                 spin_unlock(&rxq->lock);
 747                                 iwl_pcie_rx_replenish(trans, GFP_ATOMIC);
 748                                 count = 0;
 749                                 goto restart;
 750                         }
 751                 }
 752         }
 753
 754         /* Backtrack one entry */
 755         rxq->read = i;
 756         spin_unlock(&rxq->lock);
 757
 758         if (fill_rx)
 759                 iwl_pcie_rx_replenish(trans, GFP_ATOMIC);
 760         else
 761                 iwl_pcie_rxq_restock(trans);
 762
 763         if (trans_pcie->napi.poll)
 764                 napi_gro_flush(&trans_pcie->napi, false);
 765 }
 766
 767 /*
 768  * iwl_pcie_irq_handle_error - called for HW or SW error interrupt from card
 769  */
 770 static void iwl_pcie_irq_handle_error(struct iwl_trans *trans)
 771 {
 772         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 773
 774         /* W/A for WiFi/WiMAX coex and WiMAX own the RF */
 775         if (trans->cfg->internal_wimax_coex &&
 776             (!(iwl_read_prph(trans, APMG_CLK_CTRL_REG) &
 777                              APMS_CLK_VAL_MRB_FUNC_MODE) ||
 778              (iwl_read_prph(trans, APMG_PS_CTRL_REG) &
 779                             APMG_PS_CTRL_VAL_RESET_REQ))) {
 780                 clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 781                 iwl_op_mode_wimax_active(trans->op_mode);
 782                 wake_up(&trans_pcie->wait_command_queue);
 783                 return;
 784         }
 785
 786         iwl_pcie_dump_csr(trans);
 787         iwl_dump_fh(trans, NULL);
 788
 789         local_bh_disable();
 790         /* The STATUS_FW_ERROR bit is set in this function. This must happen
 791          * before we wake up the command caller, to ensure a proper cleanup. */
 792         iwl_trans_fw_error(trans);
 793         local_bh_enable();
 794
 795         clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
 796         wake_up(&trans_pcie->wait_command_queue);
 797 }
 798
 799 static u32 iwl_pcie_int_cause_non_ict(struct iwl_trans *trans)
 800 {
 801         u32 inta;
 802
 803         lockdep_assert_held(&IWL_TRANS_GET_PCIE_TRANS(trans)->irq_lock);
 804
 805         trace_iwlwifi_dev_irq(trans->dev);
 806
 807         /* Discover which interrupts are active/pending */
 808         inta = iwl_read32(trans, CSR_INT);
 809
 810         /* the thread will service interrupts and re-enable them */
 811         return inta;
 812 }
 813
 814 /* a device (PCI-E) page is 4096 bytes long */
 815 #define ICT_SHIFT       12
 816 #define ICT_SIZE        (1 << ICT_SHIFT)
 817 #define ICT_COUNT       (ICT_SIZE / sizeof(u32))
 818
 819 /* interrupt handler using ict table, with this interrupt driver will
 820  * stop using INTA register to get device's interrupt, reading this register
 821  * is expensive, device will write interrupts in ICT dram table, increment
 822  * index then will fire interrupt to driver, driver will OR all ICT table
 823  * entries from current index up to table entry with 0 value. the result is
 824  * the interrupt we need to service, driver will set the entries back to 0 and
 825  * set index.
 826  */
 827 static u32 iwl_pcie_int_cause_ict(struct iwl_trans *trans)
 828 {
 829         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 830         u32 inta;
 831         u32 val = 0;
 832         u32 read;
 833
 834         trace_iwlwifi_dev_irq(trans->dev);
 835
 836         /* Ignore interrupt if there's nothing in NIC to service.
 837          * This may be due to IRQ shared with another device,
 838          * or due to sporadic interrupts thrown from our NIC. */
 839         read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
 840         trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read);
 841         if (!read)
 842                 return 0;
 843
 844         /*
 845          * Collect all entries up to the first 0, starting from ict_index;
 846          * note we already read at ict_index.
 847          */
 848         do {
 849                 val |= read;
 850                 IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n",
 851                                 trans_pcie->ict_index, read);
 852                 trans_pcie->ict_tbl[trans_pcie->ict_index] = 0;
 853                 trans_pcie->ict_index =
 854                         ((trans_pcie->ict_index + 1) & (ICT_COUNT - 1));
 855
 856                 read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
 857                 trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index,
 858                                            read);
 859         } while (read);
 860
 861         /* We should not get this value, just ignore it. */
 862         if (val == 0xffffffff)
 863                 val = 0;
 864
 865         /*
 866          * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit
 867          * (bit 15 before shifting it to 31) to clear when using interrupt
 868          * coalescing. fortunately, bits 18 and 19 stay set when this happens
 869          * so we use them to decide on the real state of the Rx bit.
 870          * In order words, bit 15 is set if bit 18 or bit 19 are set.
 871          */
 872         if (val & 0xC0000)
 873                 val |= 0x8000;
 874
 875         inta = (0xff & val) | ((0xff00 & val) << 16);
 876         return inta;
 877 }
 878
 879 irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
 880 {
 881         struct iwl_trans *trans = dev_id;
 882         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 883         struct isr_statistics *isr_stats = &trans_pcie->isr_stats;
 884         u32 inta = 0;
 885         u32 handled = 0;
 886
 887         lock_map_acquire(&trans->sync_cmd_lockdep_map);
 888
 889         spin_lock(&trans_pcie->irq_lock);
 890
 891         /* dram interrupt table not set yet,
 892          * use legacy interrupt.
 893          */
 894         if (likely(trans_pcie->use_ict))
 895                 inta = iwl_pcie_int_cause_ict(trans);
 896         else
 897                 inta = iwl_pcie_int_cause_non_ict(trans);
 898
 899         if (iwl_have_debug_level(IWL_DL_ISR)) {
 900                 IWL_DEBUG_ISR(trans,
 901                               "ISR inta 0x%08x, enabled 0x%08x(sw), enabled(hw) 0x%08x, fh 0x%08x\n",
 902                               inta, trans_pcie->inta_mask,
 903                               iwl_read32(trans, CSR_INT_MASK),
 904                               iwl_read32(trans, CSR_FH_INT_STATUS));
 905                 if (inta & (~trans_pcie->inta_mask))
 906                         IWL_DEBUG_ISR(trans,
 907                                       "We got a masked interrupt (0x%08x)\n",
 908                                       inta & (~trans_pcie->inta_mask));
 909         }
 910
 911         inta &= trans_pcie->inta_mask;
 912
 913         /*
 914          * Ignore interrupt if there's nothing in NIC to service.
 915          * This may be due to IRQ shared with another device,
 916          * or due to sporadic interrupts thrown from our NIC.
 917          */
 918         if (unlikely(!inta)) {
 919                 IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
 920                 /*
 921                  * Re-enable interrupts here since we don't
 922                  * have anything to service
 923                  */
 924                 if (test_bit(STATUS_INT_ENABLED, &trans->status))
 925                         iwl_enable_interrupts(trans);
 926                 spin_unlock(&trans_pcie->irq_lock);
 927                 lock_map_release(&trans->sync_cmd_lockdep_map);
 928                 return IRQ_NONE;
 929         }
 930
 931         if (unlikely(inta == 0xFFFFFFFF || (inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
 932                 /*
 933                  * Hardware disappeared. It might have
 934                  * already raised an interrupt.
 935                  */
 936                 IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
 937                 spin_unlock(&trans_pcie->irq_lock);
 938                 goto out;
 939         }
 940
 941         /* Ack/clear/reset pending uCode interrupts.
 942          * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
 943          */
 944         /* There is a hardware bug in the interrupt mask function that some
 945          * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
 946          * they are disabled in the CSR_INT_MASK register. Furthermore the
 947          * ICT interrupt handling mechanism has another bug that might cause
 948          * these unmasked interrupts fail to be detected. We workaround the
 949          * hardware bugs here by ACKing all the possible interrupts so that
 950          * interrupt coalescing can still be achieved.
 951          */
 952         iwl_write32(trans, CSR_INT, inta | ~trans_pcie->inta_mask);
 953
 954         if (iwl_have_debug_level(IWL_DL_ISR))
 955                 IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n",
 956                               inta, iwl_read32(trans, CSR_INT_MASK));
 957
 958         spin_unlock(&trans_pcie->irq_lock);
 959
 960         /* Now service all interrupt bits discovered above. */
 961         if (inta & CSR_INT_BIT_HW_ERR) {
 962                 IWL_ERR(trans, "Hardware error detected.  Restarting.\n");
 963
 964                 /* Tell the device to stop sending interrupts */
 965                 iwl_disable_interrupts(trans);
 966
 967                 isr_stats->hw++;
 968                 iwl_pcie_irq_handle_error(trans);
 969
 970                 handled |= CSR_INT_BIT_HW_ERR;
 971
 972                 goto out;
 973         }
 974
 975         if (iwl_have_debug_level(IWL_DL_ISR)) {
 976                 /* NIC fires this, but we don't use it, redundant with WAKEUP */
 977                 if (inta & CSR_INT_BIT_SCD) {
 978                         IWL_DEBUG_ISR(trans,
 979                                       "Scheduler finished to transmit the frame/frames.\n");
 980                         isr_stats->sch++;
 981                 }
 982
 983                 /* Alive notification via Rx interrupt will do the real work */
 984                 if (inta & CSR_INT_BIT_ALIVE) {
 985                         IWL_DEBUG_ISR(trans, "Alive interrupt\n");
 986                         isr_stats->alive++;
 987                 }
 988         }
 989
 990         /* Safely ignore these bits for debug checks below */
 991         inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
 992
 993         /* HW RF KILL switch toggled */
 994         if (inta & CSR_INT_BIT_RF_KILL) {
 995                 bool hw_rfkill;
 996
 997                 hw_rfkill = iwl_is_rfkill_set(trans);
 998                 IWL_WARN(trans, "RF_KILL bit toggled to %s.\n",
 999                          hw_rfkill ? "disable radio" : "enable radio");
1000
1001                 isr_stats->rfkill++;
1002
1003                 iwl_trans_pcie_rf_kill(trans, hw_rfkill);
1004                 if (hw_rfkill) {
1005                         set_bit(STATUS_RFKILL, &trans->status);
1006                         if (test_and_clear_bit(STATUS_SYNC_HCMD_ACTIVE,
1007                                                &trans->status))
1008                                 IWL_DEBUG_RF_KILL(trans,
1009                                                   "Rfkill while SYNC HCMD in flight\n");
1010                         wake_up(&trans_pcie->wait_command_queue);
1011                 } else {
1012                         clear_bit(STATUS_RFKILL, &trans->status);
1013                 }
1014
1015                 handled |= CSR_INT_BIT_RF_KILL;
1016         }
1017
1018         /* Chip got too hot and stopped itself */
1019         if (inta & CSR_INT_BIT_CT_KILL) {
1020                 IWL_ERR(trans, "Microcode CT kill error detected.\n");
1021                 isr_stats->ctkill++;
1022                 handled |= CSR_INT_BIT_CT_KILL;
1023         }
1024
1025         /* Error detected by uCode */
1026         if (inta & CSR_INT_BIT_SW_ERR) {
1027                 IWL_ERR(trans, "Microcode SW error detected. "
1028                         " Restarting 0x%X.\n", inta);
1029                 isr_stats->sw++;
1030                 iwl_pcie_irq_handle_error(trans);
1031                 handled |= CSR_INT_BIT_SW_ERR;
1032         }
1033
1034         /* uCode wakes up after power-down sleep */
1035         if (inta & CSR_INT_BIT_WAKEUP) {
1036                 IWL_DEBUG_ISR(trans, "Wakeup interrupt\n");
1037                 iwl_pcie_rxq_check_wrptr(trans);
1038                 iwl_pcie_txq_check_wrptrs(trans);
1039
1040                 isr_stats->wakeup++;
1041
1042                 handled |= CSR_INT_BIT_WAKEUP;
1043         }
1044
1045         /* All uCode command responses, including Tx command responses,
1046          * Rx "responses" (frame-received notification), and other
1047          * notifications from uCode come through here*/
1048         if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
1049                     CSR_INT_BIT_RX_PERIODIC)) {
1050                 IWL_DEBUG_ISR(trans, "Rx interrupt\n");
1051                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1052                         handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1053                         iwl_write32(trans, CSR_FH_INT_STATUS,
1054                                         CSR_FH_INT_RX_MASK);
1055                 }
1056                 if (inta & CSR_INT_BIT_RX_PERIODIC) {
1057                         handled |= CSR_INT_BIT_RX_PERIODIC;
1058                         iwl_write32(trans,
1059                                 CSR_INT, CSR_INT_BIT_RX_PERIODIC);
1060                 }
1061                 /* Sending RX interrupt require many steps to be done in the
1062                  * the device:
1063                  * 1- write interrupt to current index in ICT table.
1064                  * 2- dma RX frame.
1065                  * 3- update RX shared data to indicate last write index.
1066                  * 4- send interrupt.
1067                  * This could lead to RX race, driver could receive RX interrupt
1068                  * but the shared data changes does not reflect this;
1069                  * periodic interrupt will detect any dangling Rx activity.
1070                  */
1071
1072                 /* Disable periodic interrupt; we use it as just a one-shot. */
1073                 iwl_write8(trans, CSR_INT_PERIODIC_REG,
1074                             CSR_INT_PERIODIC_DIS);
1075
1076                 /*
1077                  * Enable periodic interrupt in 8 msec only if we received
1078                  * real RX interrupt (instead of just periodic int), to catch
1079                  * any dangling Rx interrupt.  If it was just the periodic
1080                  * interrupt, there was no dangling Rx activity, and no need
1081                  * to extend the periodic interrupt; one-shot is enough.
1082                  */
1083                 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
1084                         iwl_write8(trans, CSR_INT_PERIODIC_REG,
1085                                    CSR_INT_PERIODIC_ENA);
1086
1087                 isr_stats->rx++;
1088
1089                 local_bh_disable();
1090                 iwl_pcie_rx_handle(trans);
1091                 local_bh_enable();
1092         }
1093
1094         /* This "Tx" DMA channel is used only for loading uCode */
1095         if (inta & CSR_INT_BIT_FH_TX) {
1096                 iwl_write32(trans, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
1097                 IWL_DEBUG_ISR(trans, "uCode load interrupt\n");
1098                 isr_stats->tx++;
1099                 handled |= CSR_INT_BIT_FH_TX;
1100                 /* Wake up uCode load routine, now that load is complete */
1101                 trans_pcie->ucode_write_complete = true;
1102                 wake_up(&trans_pcie->ucode_write_waitq);
1103         }
1104
1105         if (inta & ~handled) {
1106                 IWL_ERR(trans, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1107                 isr_stats->unhandled++;
1108         }
1109
1110         if (inta & ~(trans_pcie->inta_mask)) {
1111                 IWL_WARN(trans, "Disabled INTA bits 0x%08x were pending\n",
1112                          inta & ~trans_pcie->inta_mask);
1113         }
1114
1115         /* Re-enable all interrupts */
1116         /* only Re-enable if disabled by irq */
1117         if (test_bit(STATUS_INT_ENABLED, &trans->status))
1118                 iwl_enable_interrupts(trans);
1119         /* Re-enable RF_KILL if it occurred */
1120         else if (handled & CSR_INT_BIT_RF_KILL)
1121                 iwl_enable_rfkill_int(trans);
1122
1123 out:
1124         lock_map_release(&trans->sync_cmd_lockdep_map);
1125         return IRQ_HANDLED;
1126 }
1127
1128 /******************************************************************************
1129  *
1130  * ICT functions
1131  *
1132  ******************************************************************************/
1133
1134 /* Free dram table */
1135 void iwl_pcie_free_ict(struct iwl_trans *trans)
1136 {
1137         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
1138
1139         if (trans_pcie->ict_tbl) {
1140                 dma_free_coherent(trans->dev, ICT_SIZE,
1141                                   trans_pcie->ict_tbl,
1142                                   trans_pcie->ict_tbl_dma);
1143                 trans_pcie->ict_tbl = NULL;
1144                 trans_pcie->ict_tbl_dma = 0;
1145         }
1146 }
1147
1148 /*
1149  * allocate dram shared table, it is an aligned memory
1150  * block of ICT_SIZE.
1151  * also reset all data related to ICT table interrupt.
1152  */
1153 int iwl_pcie_alloc_ict(struct iwl_trans *trans)
1154 {
1155         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
1156
1157         trans_pcie->ict_tbl =
1158                 dma_zalloc_coherent(trans->dev, ICT_SIZE,
1159                                    &trans_pcie->ict_tbl_dma,
1160                                    GFP_KERNEL);
1161         if (!trans_pcie->ict_tbl)
1162                 return -ENOMEM;
1163
1164         /* just an API sanity check ... it is guaranteed to be aligned */
1165         if (WARN_ON(trans_pcie->ict_tbl_dma & (ICT_SIZE - 1))) {
1166                 iwl_pcie_free_ict(trans);
1167                 return -EINVAL;
1168         }
1169
1170         IWL_DEBUG_ISR(trans, "ict dma addr %Lx ict vir addr %p\n",
1171                       (unsigned long long)trans_pcie->ict_tbl_dma,
1172                       trans_pcie->ict_tbl);
1173
1174         return 0;
1175 }
1176
1177 /* Device is going up inform it about using ICT interrupt table,
1178  * also we need to tell the driver to start using ICT interrupt.
1179  */
1180 void iwl_pcie_reset_ict(struct iwl_trans *trans)
1181 {
1182         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
1183         u32 val;
1184
1185         if (!trans_pcie->ict_tbl)
1186                 return;
1187
1188         spin_lock(&trans_pcie->irq_lock);
1189         iwl_disable_interrupts(trans);
1190
1191         memset(trans_pcie->ict_tbl, 0, ICT_SIZE);
1192
1193         val = trans_pcie->ict_tbl_dma >> ICT_SHIFT;
1194
1195         val |= CSR_DRAM_INT_TBL_ENABLE;
1196         val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
1197
1198         IWL_DEBUG_ISR(trans, "CSR_DRAM_INT_TBL_REG =0x%x\n", val);
1199
1200         iwl_write32(trans, CSR_DRAM_INT_TBL_REG, val);
1201         trans_pcie->use_ict = true;
1202         trans_pcie->ict_index = 0;
1203         iwl_write32(trans, CSR_INT, trans_pcie->inta_mask);
1204         iwl_enable_interrupts(trans);
1205         spin_unlock(&trans_pcie->irq_lock);
1206 }
1207
1208 /* Device is going down disable ict interrupt usage */
1209 void iwl_pcie_disable_ict(struct iwl_trans *trans)
1210 {
1211         struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
1212
1213         spin_lock(&trans_pcie->irq_lock);
1214         trans_pcie->use_ict = false;
1215         spin_unlock(&trans_pcie->irq_lock);
1216 }
1217
1218 irqreturn_t iwl_pcie_isr(int irq, void *data)
1219 {
1220         struct iwl_trans *trans = data;
1221
1222         if (!trans)
1223                 return IRQ_NONE;
1224
1225         /* Disable (but don't clear!) interrupts here to avoid
1226          * back-to-back ISRs and sporadic interrupts from our NIC.
1227          * If we have something to service, the tasklet will re-enable ints.
1228          * If we *don't* have something, we'll re-enable before leaving here.
1229          */
1230         iwl_write32(trans, CSR_INT_MASK, 0x00000000);
1231
1232         return IRQ_WAKE_THREAD;
1233 }