IMG Serial Control Bus (SCB) I2C Controller Required Properties: - compatible: "img,scb-i2c" - reg: Physical base address and length of controller registers - interrupts: Interrupt number used by the controller - clocks : Should contain a clock specifier for each entry in clock-names - clock-names : Should contain the following entries: "scb", for the SCB core clock. "sys", for the system clock. - clock-frequency: The I2C bus frequency in Hz - #address-cells: Should be <1> - #size-cells: Should be <0> Example: i2c@18100000 { compatible = "img,scb-i2c"; reg = <0x18100000 0x200>; interrupts = ; clocks = <&i2c0_clk>, <&system_clk>; clock-names = "scb", "sys"; clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; };