* Allwinner sunxi MMC controller The highspeed MMC host controller on Allwinner SoCs provides an interface for MMC, SD and SDIO types of memory cards. Supported maximum speeds are the ones of the eMMC standard 4.5 as well as the speed of SD standard 3.0. Absolute maximum transfer rate is 200MB/s Required properties: - compatible : should be one of: * "allwinner,sun4i-a10-mmc" * "allwinner,sun5i-a13-mmc" * "allwinner,sun7i-a20-mmc" * "allwinner,sun9i-a80-mmc" - reg : mmc controller base registers - clocks : a list with 4 phandle + clock specifier pairs - clock-names : must contain "ahb", "mmc", "output" and "sample" - interrupts : mmc controller interrupt Optional properties: - resets : phandle + reset specifier pair - reset-names : must contain "ahb" - for cd, bus-width and additional generic mmc parameters please refer to mmc.txt within this directory Examples: - Within .dtsi: mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; clock-names = "ahb", "mod", "output", "sample"; interrupts = <0 32 4>; status = "disabled"; }; - Within dts: mmc0: mmc@01c0f000 { pinctrl-names = "default", "default"; pinctrl-0 = <&mmc0_pins_a>; pinctrl-1 = <&mmc0_cd_pin_reference_design>; bus-width = <4>; cd-gpios = <&pio 7 1 0>; /* PH1 */ cd-inverted; status = "okay"; };