The Rockchip Pinmux Controller, enables the IC
to share one PAD to several functional blocks. The sharing is done by
-multiplexing the PAD input/output signals. For each PAD there are up to
-4 muxing options with option 0 being the use as a GPIO.
+multiplexing the PAD input/output signals. For each PAD there are several
+muxing options with option 0 being the use as a GPIO.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
Required properties for iomux controller:
- compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
"rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
+ "rockchip,rk3288-pinctrl"
- rockchip,grf: phandle referencing a syscon providing the
"general register files"
Use rockchip,grf and rockchip,pmu described above instead.
Required properties for gpio sub nodes:
- - compatible: "rockchip,gpio-bank", "rockchip,rk3188-gpio-bank0"
+ - compatible: "rockchip,gpio-bank"
- reg: register of the gpio bank (different than the iomux registerset)
- interrupts: base interrupt of the gpio bank in the interrupt controller
- clocks: clock that drives this bank
bindings/interrupt-controller/interrupts.txt
Deprecated properties for gpio sub nodes:
+ - compatible: "rockchip,rk3188-gpio-bank0"
- reg: second element: separate pull register for rk3188 bank0, use
rockchip,pmu described above instead
Required properties for pin configuration node:
- rockchip,pins: 3 integers array, represents a group of pins mux and config
setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
- The MUX 0 means gpio and MUX 1 to 3 mean the specific device function.
+ The MUX 0 means gpio and MUX 1 to N mean the specific device function.
The phandle of a node containing the generic pinconfig options
to use, as described in pinctrl-bindings.txt in this directory.