dt-bindings: consolidate display related bindings

[cascardo/linux.git] / Documentation / devicetree / bindings / video / exynos_dp.txt

diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
deleted file mode 100644 (file)
index 7a3a9cd..0000000
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ /dev/null
@@ -1,120 +0,0 @@
-The Exynos display port interface should be configured based on
-the type of panel connected to it.
-
-We use two nodes:
-       -dp-controller node
-       -dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy: deprecated, use phys and phy-names
-       -reg: deprecated
-               Base address of DP PHY register.
-       -samsung,enable-mask: deprecated
-               The bit-mask used to enable/disable DP PHY.
-
-For the Panel initialization, we read data from dp-controller node.
-Required properties for dp-controller:
-       -compatible:
-               should be "samsung,exynos5-dp".
-       -reg:
-               physical base address of the controller and length
-               of memory mapped region.
-       -interrupts:
-               interrupt combiner values.
-       -clocks:
-               from common clock binding: handle to dp clock.
-       -clock-names:
-               from common clock binding: Shall be "dp".
-       -interrupt-parent:
-               phandle to Interrupt combiner node.
-       -phys:
-               from general PHY binding: the phandle for the PHY device.
-       -phy-names:
-               from general PHY binding: Should be "dp".
-       -samsung,color-space:
-               input video data format.
-                       COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
-       -samsung,dynamic-range:
-               dynamic range for input video data.
-                       VESA = 0, CEA = 1
-       -samsung,ycbcr-coeff:
-               YCbCr co-efficients for input video.
-                       COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
-       -samsung,color-depth:
-               number of bits per colour component.
-                       COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
-       -samsung,link-rate:
-               link rate supported by the panel.
-                       LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
-       -samsung,lane-count:
-               number of lanes supported by the panel.
-                       LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
-       - display-timings: timings for the connected panel as described by
-               Documentation/devicetree/bindings/video/display-timing.txt
-
-Optional properties for dp-controller:
-       -interlaced:
-               interlace scan mode.
-                       Progressive if defined, Interlaced if not defined
-       -vsync-active-high:
-               VSYNC polarity configuration.
-                       High if defined, Low if not defined
-       -hsync-active-high:
-               HSYNC polarity configuration.
-                       High if defined, Low if not defined
-       -samsung,hpd-gpio:
-               Hotplug detect GPIO.
-                       Indicates which GPIO should be used for hotplug
-                       detection
-       -video interfaces: Device node can contain video interface port
-                           nodes according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-SOC specific portion:
-       dp-controller {
-               compatible = "samsung,exynos5-dp";
-               reg = <0x145b0000 0x10000>;
-               interrupts = <10 3>;
-               interrupt-parent = <&combiner>;
-               clocks = <&clock 342>;
-               clock-names = "dp";
-
-               phys = <&dp_phy>;
-               phy-names = "dp";
-       };
-
-Board Specific portion:
-       dp-controller {
-               samsung,color-space = <0>;
-               samsung,dynamic-range = <0>;
-               samsung,ycbcr-coeff = <0>;
-               samsung,color-depth = <1>;
-               samsung,link-rate = <0x0a>;
-               samsung,lane-count = <4>;
-
-               display-timings {
-                       native-mode = <&lcd_timing>;
-                       lcd_timing: 1366x768 {
-                               clock-frequency = <70589280>;
-                               hactive = <1366>;
-                               vactive = <768>;
-                               hfront-porch = <40>;
-                               hback-porch = <40>;
-                               hsync-len = <32>;
-                               vback-porch = <10>;
-                               vfront-porch = <12>;
-                               vsync-len = <6>;
-                       };
-               };
-
-               ports {
-                       port@0 {
-                               dp_out: endpoint {
-                                       remote-endpoint = <&bridge_in>;
-                               };
-                       };
-               };
-       };