i2c: core: Add support for 'i2c-bus' subnode

[cascardo/linux.git] / Documentation / dvb / avermedia.txt

diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt
index 068070f..e44c009 100644 (file)
--- a/Documentation/dvb/avermedia.txt
+++ b/Documentation/dvb/avermedia.txt
@@ -1,4 +1,3 @@
-
 HOWTO: Get An Avermedia DVB-T working under Linux
           ______________________________________________
 
@@ -46,9 +45,9 @@ Assumptions and Introduction
    by  circuitry on the card and is often presented uncompressed.
    For  a PAL TV signal encoded at a resolution of 768x576 24-bit
    color pixels over 25 frames per second - a fair amount of data
-   is  generated and must be proceesed by the PC before it can be
+   is  generated and must be processed by the PC before it can be
    displayed  on the video monitor screen. Some Analogue TV cards
-   for  PC's  have  onboard  MPEG2  encoders which permit the raw
+   for  PCs  have  onboard  MPEG2  encoders  which permit the raw
    digital  data  stream  to be presented to the PC in an encoded
    and  compressed  form  -  similar  to the form that is used in
    Digital TV.
@@ -137,11 +136,8 @@ Getting the card going
    To  power  up  the  card,  load  the  following modules in the
    following order:
 
-     * insmod dvb-core.o
-     * modprobe bttv.o
-     * insmod bt878.o
-     * insmod dvb-bt8xx.o
-     * insmod sp887x.o
+     * modprobe bttv (normally loaded automatically)
+     * modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
 
    Insertion  of  these  modules  into  the  running  kernel will
    activate the appropriate DVB device nodes. It is then possible
@@ -302,4 +298,4 @@ Further Update
    Many  thanks to Nigel Pearson for the updates to this document
    since the recent revision of the driver.
 
-   January 29th 2004
+   February 14th 2006