i2c: core: Add support for 'i2c-bus' subnode

[cascardo/linux.git] / Documentation / dvb / avermedia.txt

diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt
index 2dc260b..e44c009 100644 (file)
--- a/Documentation/dvb/avermedia.txt
+++ b/Documentation/dvb/avermedia.txt
@@ -1,4 +1,3 @@
-

 HOWTO: Get An Avermedia DVB-T working under Linux
           ______________________________________________
 
 HOWTO: Get An Avermedia DVB-T working under Linux
           ______________________________________________
 


@@ -46,9 +45,9 @@ Assumptions and Introduction
    by  circuitry on the card and is often presented uncompressed.
    For  a PAL TV signal encoded at a resolution of 768x576 24-bit
    color pixels over 25 frames per second - a fair amount of data
    by  circuitry on the card and is often presented uncompressed.
    For  a PAL TV signal encoded at a resolution of 768x576 24-bit
    color pixels over 25 frames per second - a fair amount of data

-   is  generated and must be proceesed by the PC before it can be
+   is  generated and must be processed by the PC before it can be

    displayed  on the video monitor screen. Some Analogue TV cards
    displayed  on the video monitor screen. Some Analogue TV cards

-   for  PC's  have  onboard  MPEG2  encoders which permit the raw
+   for  PCs  have  onboard  MPEG2  encoders  which permit the raw

    digital  data  stream  to be presented to the PC in an encoded
    and  compressed  form  -  similar  to the form that is used in
    Digital TV.
    digital  data  stream  to be presented to the PC in an encoded
    and  compressed  form  -  similar  to the form that is used in
    Digital TV.


@@ -137,11 +136,8 @@ Getting the card going
    To  power  up  the  card,  load  the  following modules in the
    following order:
 
    To  power  up  the  card,  load  the  following modules in the
    following order:
 

-     * insmod dvb-core.o
-     * modprobe bttv.o
-     * insmod bt878.o
-     * insmod dvb-bt8xx.o
-     * insmod sp887x.o
+     * modprobe bttv (normally loaded automatically)
+     * modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)

 
    Insertion  of  these  modules  into  the  running  kernel will
    activate the appropriate DVB device nodes. It is then possible
 
    Insertion  of  these  modules  into  the  running  kernel will
    activate the appropriate DVB device nodes. It is then possible


@@ -150,7 +146,8 @@ Getting the card going
 
    The frontend module sp887x.o, requires an external   firmware.
    Please use  the  command "get_dvb_firmware sp887x" to download
 
    The frontend module sp887x.o, requires an external   firmware.
    Please use  the  command "get_dvb_firmware sp887x" to download

-   it. Then copy it to /usr/lib/hotplug/firmware.
+   it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/
+   (depending on configuration of firmware hotplug).

 
 Receiving DVB-T in Australia
 
 
 Receiving DVB-T in Australia
 


@@ -301,4 +298,4 @@ Further Update
    Many  thanks to Nigel Pearson for the updates to this document
    since the recent revision of the driver.
 
    Many  thanks to Nigel Pearson for the updates to this document
    since the recent revision of the driver.
 

-   January 29th 2004
+   February 14th 2006