Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

[cascardo/linux.git] / Documentation / media / uapi / dvb / fe_property_parameters.rst

diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst
index 304ac1a..7bb7559 100644 (file)
--- a/Documentation/media/uapi/dvb/fe_property_parameters.rst
+++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst
@@ -68,10 +68,10 @@ DTV_MODULATION
 
 Specifies the frontend modulation type for delivery systems that
 supports more than one modulation type. The modulation can be one of the
-types defined by enum :ref:`fe_modulation <fe-modulation>`.
+types defined by enum :c:type:`fe_modulation`.
 
 
-.. _fe-modulation-t:
+.. c:type:: fe_modulation
 
 Modulation property
 -------------------
@@ -82,8 +82,6 @@ enum contains the values used by the Kernel. Please note that not all
 modulations are supported by a given standard.
 
 
-.. _fe-modulation:
-
 .. flat-table:: enum fe_modulation
     :header-rows:  1
     :stub-columns: 0
@@ -251,8 +249,7 @@ DTV_INVERSION
 
 Specifies if the frontend should do spectral inversion or not.
 
-
-.. _fe-spectral-inversion-t:
+.. c:type:: fe_spectral_inversion
 
 enum fe_modulation: Frontend spectral inversion
 -----------------------------------------------
@@ -264,8 +261,6 @@ support, the DVB core will try to lock at the carrier first with
 inversion off. If it fails, it will try to enable inversion.
 
 
-.. _fe-spectral-inversion:
-
 .. flat-table:: enum fe_modulation
     :header-rows:  1
     :stub-columns: 0
@@ -327,15 +322,11 @@ DTV_INNER_FEC
 
 Used cable/satellite transmissions. The acceptable values are:
 
-
-.. _fe-code-rate-t:
+.. c:type:: fe_code_rate
 
 enum fe_code_rate: type of the Forward Error Correction.
 --------------------------------------------------------
 
-
-.. _fe-code-rate:
-
 .. flat-table:: enum fe_code_rate
     :header-rows:  1
     :stub-columns: 0
@@ -464,7 +455,7 @@ voltage has to be switched consistently to the DiSEqC commands as
 described in the DiSEqC spec.
 
 
-.. _fe-sec-voltage:
+.. c:type:: fe_sec_voltage
 
 .. flat-table:: enum fe_sec_voltage
     :header-rows:  1
@@ -519,14 +510,12 @@ DTV_PILOT
 Sets DVB-S2 pilot
 
 
-.. _fe-pilot-t:
+.. c:type:: fe_pilot
 
 fe_pilot type
 -------------
 
 
-.. _fe-pilot:
-
 .. flat-table:: enum fe_pilot
     :header-rows:  1
     :stub-columns: 0
@@ -572,14 +561,12 @@ DTV_ROLLOFF
 Sets DVB-S2 rolloff
 
 
-.. _fe-rolloff-t:
+.. c:type:: fe_rolloff
 
 fe_rolloff type
 ---------------
 
 
-.. _fe-rolloff:
-
 .. flat-table:: enum fe_rolloff
     :header-rows:  1
     :stub-columns: 0
@@ -657,7 +644,7 @@ DTV_DELIVERY_SYSTEM
 Specifies the type of Delivery system
 
 
-.. _fe-delivery-system-t:
+.. c:type:: fe_delivery_system
 
 fe_delivery_system type
 -----------------------
@@ -665,8 +652,6 @@ fe_delivery_system type
 Possible values:
 
 
-.. _fe-delivery-system:
-
 .. flat-table:: enum fe_delivery_system
     :header-rows:  1
     :stub-columns: 0
@@ -1098,7 +1083,7 @@ The values here are referring to what can be found in the
 TMCC-structure, as shown in the table below.
 
 
-.. _isdbt-layer-interleaving-table:
+.. c:type:: isdbt_layer_interleaving_table
 
 .. flat-table:: ISDB-T time interleaving modes
     :header-rows:  0
@@ -1235,7 +1220,7 @@ Possible values are:
 
 .. tabularcolumns:: |p{5.0cm}|p{12.5cm}|
 
-.. _atscmh-rs-frame-mode:
+.. c:type:: atscmh_rs_frame_mode
 
 .. flat-table:: enum atscmh_rs_frame_mode
     :header-rows:  1
@@ -1279,7 +1264,7 @@ Reed Solomon(RS) frame ensemble.
 Possible values are:
 
 
-.. _atscmh-rs-frame-ensemble:
+.. c:type:: atscmh_rs_frame_ensemble
 
 .. flat-table:: enum atscmh_rs_frame_ensemble
     :header-rows:  1
@@ -1328,7 +1313,7 @@ Reed Solomon (RS) code mode (primary).
 Possible values are:
 
 
-.. _atscmh-rs-code-mode:
+.. c:type:: atscmh_rs_code_mode
 
 .. flat-table:: enum atscmh_rs_code_mode
     :header-rows:  1
@@ -1383,7 +1368,7 @@ DTV_ATSCMH_RS_CODE_MODE_SEC
 Reed Solomon (RS) code mode (secondary).
 
 Possible values are the same as documented on enum
-:ref:`atscmh_rs_code_mode <atscmh-rs-code-mode>`:
+:c:type:`atscmh_rs_code_mode`:
 
 
 .. _DTV-ATSCMH-SCCC-BLOCK-MODE:
@@ -1397,7 +1382,7 @@ Possible values are:
 
 .. tabularcolumns:: |p{4.5cm}|p{13.0cm}|
 
-.. _atscmh-sccc-block-mode:
+.. c:type:: atscmh_sccc_block_mode
 
 .. flat-table:: enum atscmh_scc_block_mode
     :header-rows:  1
@@ -1448,7 +1433,7 @@ Series Concatenated Convolutional Code Rate.
 Possible values are:
 
 
-.. _atscmh-sccc-code-mode:
+.. c:type:: atscmh_sccc_code_mode
 
 .. flat-table:: enum atscmh_sccc_code_mode
     :header-rows:  1
@@ -1495,7 +1480,7 @@ DTV_ATSCMH_SCCC_CODE_MODE_B
 Series Concatenated Convolutional Code Rate.
 
 Possible values are the same as documented on enum
-:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`.
+:c:type:`atscmh_sccc_code_mode`.
 
 
 .. _DTV-ATSCMH-SCCC-CODE-MODE-C:
@@ -1506,7 +1491,7 @@ DTV_ATSCMH_SCCC_CODE_MODE_C
 Series Concatenated Convolutional Code Rate.
 
 Possible values are the same as documented on enum
-:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`.
+:c:type:`atscmh_sccc_code_mode`.
 
 
 .. _DTV-ATSCMH-SCCC-CODE-MODE-D:
@@ -1517,7 +1502,7 @@ DTV_ATSCMH_SCCC_CODE_MODE_D
 Series Concatenated Convolutional Code Rate.
 
 Possible values are the same as documented on enum
-:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`.
+:c:type:`atscmh_sccc_code_mode`.
 
 
 .. _DTV-API-VERSION:
@@ -1534,7 +1519,7 @@ DTV_CODE_RATE_HP
 ================
 
 Used on terrestrial transmissions. The acceptable values are the ones
-described at :ref:`fe_transmit_mode_t <fe-transmit-mode-t>`.
+described at :c:type:`fe_transmit_mode`.
 
 
 .. _DTV-CODE-RATE-LP:
@@ -1543,7 +1528,7 @@ DTV_CODE_RATE_LP
 ================
 
 Used on terrestrial transmissions. The acceptable values are the ones
-described at :ref:`fe_transmit_mode_t <fe-transmit-mode-t>`.
+described at :c:type:`fe_transmit_mode`.
 
 
 .. _DTV-GUARD-INTERVAL:
@@ -1554,14 +1539,12 @@ DTV_GUARD_INTERVAL
 Possible values are:
 
 
-.. _fe-guard-interval-t:
+.. c:type:: fe_guard_interval
 
 Modulation guard interval
 -------------------------
 
 
-.. _fe-guard-interval:
-
 .. flat-table:: enum fe_guard_interval
     :header-rows:  1
     :stub-columns: 0
@@ -1683,15 +1666,13 @@ Specifies the number of carriers used by the standard. This is used only
 on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB
 
 
-.. _fe-transmit-mode-t:
+.. c:type:: fe_transmit_mode
 
 enum fe_transmit_mode: Number of carriers per channel
 -----------------------------------------------------
 
 .. tabularcolumns:: |p{5.0cm}|p{12.5cm}|
 
-.. _fe-transmit-mode:
-
 .. flat-table:: enum fe_transmit_mode
     :header-rows:  1
     :stub-columns: 0
@@ -1801,14 +1782,12 @@ DTV_HIERARCHY
 Frontend hierarchy
 
 
-.. _fe-hierarchy-t:
+.. c:type:: fe_hierarchy
 
 Frontend hierarchy
 ------------------
 
 
-.. _fe-hierarchy:
-
 .. flat-table:: enum fe_hierarchy
     :header-rows:  1
     :stub-columns: 0
@@ -1914,7 +1893,7 @@ DTV_INTERLEAVING
 Time interleaving to be used. Currently, used only on DTMB.
 
 
-.. _fe-interleaving:
+.. c:type:: fe_interleaving
 
 .. flat-table:: enum fe_interleaving
     :header-rows:  1