-
- - .. row 1
-
- - __u32
-
- - ``index``
-
- - Identifies the output, set by the application.
-
- - .. row 2
-
- - __u8
-
- - ``name``\ [32]
-
- - Name of the video output, a NUL-terminated ASCII string, for
- example: "Vout". This information is intended for the user,
- preferably the connector label on the device itself.
-
- - .. row 3
-
- - __u32
-
- - ``type``
-
- - Type of the output, see :ref:`output-type`.
-
- - .. row 4
-
- - __u32
-
- - ``audioset``
-
- - Drivers can enumerate up to 32 video and audio outputs. This field
- shows which audio outputs were selectable as the current output if
- this was the currently selected video output. It is a bit mask.
- The LSB corresponds to audio output 0, the MSB to output 31. Any
- number of bits can be set, or none.
-
- When the driver does not enumerate audio outputs no bits must be
- set. Applications shall not interpret this as lack of audio
- support. Drivers may automatically select audio outputs without
- enumerating them.
-
- For details on audio outputs and how to select the current output
- see :ref:`audio`.
-
- - .. row 5
-
- - __u32
-
- - ``modulator``
-
- - Output devices can have zero or more RF modulators. When the
- ``type`` is ``V4L2_OUTPUT_TYPE_MODULATOR`` this is an RF connector
- and this field identifies the modulator. It corresponds to struct
- :ref:`v4l2_modulator <v4l2-modulator>` field ``index``. For
- details on modulators see :ref:`tuner`.
-
- - .. row 6
-
- - :ref:`v4l2_std_id <v4l2-std-id>`
-
- - ``std``
-
- - Every video output supports one or more different video standards.
- This field is a set of all supported standards. For details on
- video standards and how to switch see :ref:`standard`.
-
- - .. row 7
-
- - __u32
-
- - ``capabilities``
-
- - This field provides capabilities for the output. See
- :ref:`output-capabilities` for flags.
-
- - .. row 8
-
- - __u32
-
- - ``reserved``\ [3]
-
- - Reserved for future extensions. Drivers must set the array to
- zero.
-
-
+ * - __u32
+ - ``index``
+ - Identifies the output, set by the application.
+ * - __u8
+ - ``name``\ [32]
+ - Name of the video output, a NUL-terminated ASCII string, for
+ example: "Vout". This information is intended for the user,
+ preferably the connector label on the device itself.
+ * - __u32
+ - ``type``
+ - Type of the output, see :ref:`output-type`.
+ * - __u32
+ - ``audioset``
+ - Drivers can enumerate up to 32 video and audio outputs. This field
+ shows which audio outputs were selectable as the current output if
+ this was the currently selected video output. It is a bit mask.
+ The LSB corresponds to audio output 0, the MSB to output 31. Any
+ number of bits can be set, or none.
+
+ When the driver does not enumerate audio outputs no bits must be
+ set. Applications shall not interpret this as lack of audio
+ support. Drivers may automatically select audio outputs without
+ enumerating them.
+
+ For details on audio outputs and how to select the current output
+ see :ref:`audio`.
+ * - __u32
+ - ``modulator``
+ - Output devices can have zero or more RF modulators. When the
+ ``type`` is ``V4L2_OUTPUT_TYPE_MODULATOR`` this is an RF connector
+ and this field identifies the modulator. It corresponds to struct
+ :c:type:`v4l2_modulator` field ``index``. For
+ details on modulators see :ref:`tuner`.
+ * - :ref:`v4l2_std_id <v4l2-std-id>`
+ - ``std``
+ - Every video output supports one or more different video standards.
+ This field is a set of all supported standards. For details on
+ video standards and how to switch see :ref:`standard`.
+ * - __u32
+ - ``capabilities``
+ - This field provides capabilities for the output. See
+ :ref:`output-capabilities` for flags.
+ * - __u32
+ - ``reserved``\ [3]
+ - Reserved for future extensions. Drivers must set the array to
+ zero.
+
+
+
+.. tabularcolumns:: |p{7.0cm}|p{1.8cm}|p{8.7cm}|