0x80020000 | 0xf0020000 | UART8
0x80024000 | 0xf0024000 | UART9
- config DEBUG_AT91_UART
- bool "Kernel low-level debugging on Atmel SoCs"
- depends on ARCH_AT91
+ config DEBUG_AT91_RM9200_DBGU
+ bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+ select DEBUG_AT91_UART
+ depends on SOC_AT91RM9200 || SOC_AT91SAM9
help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on atmel devices.
+ Say Y here if you want kernel low-level debugging support
+ on the DBGU port of:
+ at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+ at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
- SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT
- rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU
- 9261/9g10, 9rl
- 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU
- sama5d4 0xfc00c000 0xfb00c000 USART3
- sama5d4 0xfc069000 0xfb069000 DBGU
- sama5d2 0xf8020000 0xf7020000 UART1
+ config DEBUG_AT91_SAM9263_DBGU
+ bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+ select DEBUG_AT91_UART
+ depends on SOC_AT91SAM9 || SOC_SAMA5D3
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the DBGU port of:
+ at91sam9263, at91sam9g45, at91sam9m10,
+ sama5d3
- Please adjust DEBUG_UART_PHYS configuration options based on
- your needs.
+ config DEBUG_AT91_SAMA5D2_UART1
+ bool "Kernel low-level debugging on SAMA5D2 UART1"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMA5D2
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the UART1 port of sama5d2.
+
+ config DEBUG_AT91_SAMA5D4_USART3
+ bool "Kernel low-level debugging on SAMA5D4 USART3"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMA5D4
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the USART3 port of sama5d4.
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
select DEBUG_UART_PL01X
config DEBUG_BCM_5301X
- bool "Kernel low-level debugging on BCM5301X UART1"
- depends on ARCH_BCM_5301X
+ bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+ depends on ARCH_BCM_5301X || ARCH_BCM_NSP
select DEBUG_UART_8250
config DEBUG_BCM_KONA_UART
config DEBUG_BRCMSTB_UART
bool "Use BRCMSTB UART for low-level debug"
depends on ARCH_BRCMSTB
- select DEBUG_UART_8250
help
Say Y here if you want the debug print routines to direct
- their output to the first serial port on these devices.
+ their output to the first serial port on these devices. The
+ UART physical and virtual address is automatically provided
+ based on the chip identification register value.
If you have a Broadcom STB chip and would like early print
messages to appear over the UART, select this option.
via SCIF2 on Renesas R-Car H1 (R8A7779).
config DEBUG_RCAR_GEN2_SCIF0
- bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793"
- depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
+ bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793"
+ depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
help
Say Y here if you want kernel low-level debugging support
- via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
- M2-N (R8A7793).
+ via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H
+ (R8A7792), or M2-N (R8A7793).
config DEBUG_RCAR_GEN2_SCIF2
bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
endchoice
+config DEBUG_AT91_UART
+ bool
+ depends on ARCH_AT91
+
config DEBUG_EXYNOS_UART
bool
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
+ default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
default "mach/debug-macro.S"
# Compatibility options for PL01x
default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
default 0xe8008000 if DEBUG_R7S72100_SCIF2
default 0xf0000be0 if ARCH_EBSA110
- default 0xf040ab00 if DEBUG_BRCMSTB_UART
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
+ default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
default 0xf8b00000 if DEBUG_HIX5HD2_UART
default 0xf991e000 if DEBUG_QCOM_UARTDM
+ default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe800000 if ARCH_IOP32X
default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
default 0xfffe8600 if DEBUG_BCM63XX_UART
+ default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+ default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
default 0xfffff700 if ARCH_IOP33X
depends on ARCH_EP93XX || \
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_S3C2410_UART1)
default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
DEBUG_S3C2410_UART2)
+ default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8007000 if DEBUG_HIP04_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+ default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+ default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
default 0xfa71e000 if DEBUG_QCOM_UARTDM
default 0xfb002000 if DEBUG_CNS3XXX
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+ default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
- default 0xfc40ab00 if DEBUG_BRCMSTB_UART
default 0xfc705000 if DEBUG_ZTE_ZX
default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_S3C64XX_UART || \
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
- DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+ DEBUG_AT91_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
- DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
- DEBUG_BRCMSTB_UART
+ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
config DEBUG_UART_8250_PALMCHIP
bool "8250 UART is Palmchip BK-310x"
bool
depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
- (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
+ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
+ !DEBUG_BRCMSTB_UART
help
This option influences the normal decompressor output for
multiplatform kernels. Normally, multiplatform kernels disable