interrupt-parent = <&gic>;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+
+ operating-points-v2 = <&cpu0_opp_table>;
+ ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>;
+ ti,syscon-rev = <&scm_wkup 0x204>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <2>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp_nom@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1060000 850000 1150000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp_od@1176000000 {
+ opp-hz = /bits/ 64 <1176000000>;
+ opp-microvolt = <1160000 885000 1160000>;
+ opp-supported-hw = <0xFF 0x02>;
+ };
+ };
+
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
prm_clockdomains: clockdomains {
};
};
+
+ scm_wkup: scm_conf@c000 {
+ compatible = "syscon";
+ reg = <0xc000 0x1000>;
+ };
};
axi@0 {
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
status = "disabled";
- pcie@51000000 {
+ pcie@51800000 {
compatible = "ti,dra7-pcie";
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
};
};
+ ocmcram1: ocmcram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x80000>;
+ ranges = <0x0 0x40300000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * This is a placeholder for an optional reserved
+ * region for use by secure software. The size
+ * of this region is not known until runtime so it
+ * is set as zero to either be updated to reserve
+ * space or left unchanged to leave all SRAM for use.
+ * On HS parts that that require the reserved region
+ * either the bootloader can update the size to
+ * the required amount or the node can be overridden
+ * from the board dts file for the secure platform.
+ */
+ sram-hs@0 {
+ compatible = "ti,secure-ram";
+ reg = <0x0 0x0>;
+ };
+ };
+
+ /*
+ * NOTE: ocmcram2 and ocmcram3 are not available on all
+ * DRA7xx and AM57xx variants. Confirm availability in
+ * the data manual for the exact part number in use
+ * before enabling these nodes in the board dts file.
+ */
+ ocmcram2: ocmcram@40400000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40400000 0x100000>;
+ ranges = <0x0 0x40400000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ ocmcram3: ocmcram@40500000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40500000 0x100000>;
+ ranges = <0x0 0x40500000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
bandgap: bandgap@4a0021e0 {
reg = <0x4a0021e0 0xc
0x4a00232c 0xc
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma3_ccint", "emda3_mperr",
+ interrupt-names = "edma3_ccint", "edma3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
clock-names = "fck", "sys_clk";
};
};
+
+ epwmss0: epwmss@4843e000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm0: pwm@4843e200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x4843e200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap0: ecap@4843e100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss1: epwmss@48440000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48440000 0x30>;
+ ti,hwmods = "epwmss1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm1: pwm@48440200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48440200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap1: ecap@48440100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48440100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss2: epwmss@48442000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48442000 0x30>;
+ ti,hwmods = "epwmss2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm2: pwm@48442200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48442200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap2: ecap@48442100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48442100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ aes1: aes@4b500000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes1";
+ reg = <0x4b500000 0xa0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ aes2: aes@4b700000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes2";
+ reg = <0x4b700000 0xa0>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ des: des@480a5000 {
+ compatible = "ti,omap4-des";
+ ti,hwmods = "des";
+ reg = <0x480a5000 0xa0>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ sham: sham@53100000 {
+ compatible = "ti,omap5-sham";
+ ti,hwmods = "sham";
+ reg = <0x4b101000 0x300>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 119 0>;
+ dma-names = "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ rng: rng@48090000 {
+ compatible = "ti,omap4-rng";
+ ti,hwmods = "rng";
+ reg = <0x48090000 0x2000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
};
thermal_zones: thermal-zones {
projects / cascardo / linux.git / blobdiff