Merge branch 'enable-devices' into omap-for-v4.5/fixes

[cascardo/linux.git] / arch / arm / boot / dts / omap5-board-common.dtsi

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 888412c..902657d 100644 (file)
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -130,6 +130,16 @@
        };
 };
 
+&gpio8 {
+       /* TI trees use GPIO instead of msecure, see also muxing */
+       p234 {
+               gpio-hog;
+               gpios = <10 GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "gpio8_234/msecure";
+       };
+};
+
 &omap5_pmx_core {
        pinctrl-names = "default";
        pinctrl-0 = <
@@ -213,6 +223,13 @@
                >;
        };
 
+       /* TI trees use GPIO mode; msecure mode does not work reliably? */
+       palmas_msecure_pins: palmas_msecure_pins {
+               pinctrl-single,pins = <
+                       OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+               >;
+       };
+
        usbhost_pins: pinmux_usbhost_pins {
                pinctrl-single,pins = <
                        OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
@@ -278,6 +295,12 @@
                        &usbhost_wkup_pins
        >;
 
+       palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+               pinctrl-single,pins = <
+                       OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+               >;
+       };
+
        usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
                pinctrl-single,pins = <
                        OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
@@ -345,6 +368,8 @@
                interrupt-controller;
                #interrupt-cells = <2>;
                ti,system-power-controller;
+               pinctrl-names = "default";
+               pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 
                extcon_usb3: palmas_usb {
                        compatible = "ti,palmas-usb-vid";
@@ -358,6 +383,14 @@
                        #clock-cells = <0>;
                };
 
+               rtc {
+                       compatible = "ti,palmas-rtc";
+                       interrupt-parent = <&palmas>;
+                       interrupts = <8 IRQ_TYPE_NONE>;
+                       ti,backup-battery-chargeable;
+                       ti,backup-battery-charge-high-current;
+               };
+
                palmas_pmic {
                        compatible = "ti,palmas-pmic";
                        interrupt-parent = <&palmas>;