Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

[cascardo/linux.git] / arch / arm / mach-imx / Kconfig

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index af8e109..f546560 100644 (file)
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -56,9 +56,6 @@ config MXC_USE_EPIT
          uses the same clocks as the GPT. Anyway, on some systems the GPT
          may be in use for other purposes.
 
-config MXC_ULPI
-       bool
-
 config ARCH_HAS_RNGA
        bool
 
@@ -174,6 +171,7 @@ config ARCH_MX1ADS
 config MACH_SCB9328
        bool "Synertronixx scb9328"
        select IMX_HAVE_PLATFORM_IMX_UART
+       select SOC_IMX1
        help
          Say Y here if you are using a Synertronixx scb9328 board
 
@@ -231,7 +229,7 @@ config MACH_EUKREA_CPUIMX25SD
        select IMX_HAVE_PLATFORM_MXC_EHCI
        select IMX_HAVE_PLATFORM_MXC_NAND
        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX25
 
 choice
@@ -282,7 +280,7 @@ config MACH_PCM038
        select IMX_HAVE_PLATFORM_MXC_NAND
        select IMX_HAVE_PLATFORM_MXC_W1
        select IMX_HAVE_PLATFORM_SPI_IMX
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX27
        help
          Include support for phyCORE-i.MX27 (aka pcm038) platform. This
@@ -312,7 +310,7 @@ config MACH_CPUIMX27
        select IMX_HAVE_PLATFORM_MXC_EHCI
        select IMX_HAVE_PLATFORM_MXC_NAND
        select IMX_HAVE_PLATFORM_MXC_W1
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX27
        help
          Include support for Eukrea CPUIMX27 platform. This includes
@@ -367,7 +365,7 @@ config MACH_MX27_3DS
        select IMX_HAVE_PLATFORM_MXC_MMC
        select IMX_HAVE_PLATFORM_SPI_IMX
        select MXC_DEBUG_BOARD
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX27
        help
          Include support for MX27PDK platform. This includes specific
@@ -412,7 +410,7 @@ config MACH_PCA100
        select IMX_HAVE_PLATFORM_MXC_NAND
        select IMX_HAVE_PLATFORM_MXC_W1
        select IMX_HAVE_PLATFORM_SPI_IMX
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX27
        help
          Include support for phyCARD-s (aka pca100) platform. This
@@ -479,7 +477,7 @@ config MACH_MX31LILLY
        select IMX_HAVE_PLATFORM_MXC_EHCI
        select IMX_HAVE_PLATFORM_MXC_MMC
        select IMX_HAVE_PLATFORM_SPI_IMX
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX31
        help
          Include support for mx31 based LILLY1131 modules. This includes
@@ -495,7 +493,7 @@ config MACH_MX31LITE
        select IMX_HAVE_PLATFORM_MXC_RTC
        select IMX_HAVE_PLATFORM_SPI_IMX
        select LEDS_GPIO_REGISTER
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX31
        help
          Include support for MX31 LITEKIT platform. This includes specific
@@ -512,7 +510,7 @@ config MACH_PCM037
        select IMX_HAVE_PLATFORM_MXC_MMC
        select IMX_HAVE_PLATFORM_MXC_NAND
        select IMX_HAVE_PLATFORM_MXC_W1
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX31
        help
          Include support for Phytec pcm037 platform. This includes
@@ -542,7 +540,7 @@ config MACH_MX31_3DS
        select IMX_HAVE_PLATFORM_MXC_NAND
        select IMX_HAVE_PLATFORM_SPI_IMX
        select MXC_DEBUG_BOARD
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX31
        help
          Include support for MX31PDK (3DS) platform. This includes specific
@@ -569,7 +567,7 @@ config MACH_MX31MOBOARD
        select IMX_HAVE_PLATFORM_MXC_MMC
        select IMX_HAVE_PLATFORM_SPI_IMX
        select LEDS_GPIO_REGISTER
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX31
        help
          Include support for mx31moboard platform. This includes specific
@@ -593,7 +591,7 @@ config MACH_ARMADILLO5X0
        select IMX_HAVE_PLATFORM_MXC_EHCI
        select IMX_HAVE_PLATFORM_MXC_MMC
        select IMX_HAVE_PLATFORM_MXC_NAND
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX31
        help
          Include support for Atmark Armadillo-500 platform. This includes
@@ -637,7 +635,7 @@ config MACH_PCM043
        select IMX_HAVE_PLATFORM_MXC_EHCI
        select IMX_HAVE_PLATFORM_MXC_NAND
        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX35
        help
          Include support for Phytec pcm043 platform. This includes
@@ -671,7 +669,7 @@ config MACH_EUKREA_CPUIMX35SD
        select IMX_HAVE_PLATFORM_MXC_EHCI
        select IMX_HAVE_PLATFORM_MXC_NAND
        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-       select MXC_ULPI if USB_ULPI
+       select USB_ULPI_VIEWPORT if USB_ULPI
        select SOC_IMX35
        help
          Include support for Eukrea CPUIMX35 platform. This includes
@@ -812,6 +810,41 @@ config SOC_IMX6Q
        help
          This enables support for Freescale i.MX6 Quad processor.
 
+config SOC_IMX6SL
+       bool "i.MX6 SoloLite support"
+       select ARM_ERRATA_754322
+       select ARM_ERRATA_775420
+       select ARM_GIC
+       select CPU_V7
+       select HAVE_IMX_ANATOP
+       select HAVE_IMX_GPC
+       select HAVE_IMX_MMDC
+       select HAVE_IMX_SRC
+       select MFD_SYSCON
+       select PINCTRL
+       select PINCTRL_IMX6SL
+       select PL310_ERRATA_588369 if CACHE_PL310
+       select PL310_ERRATA_727915 if CACHE_PL310
+       select PL310_ERRATA_769419 if CACHE_PL310
+
+       help
+         This enables support for Freescale i.MX6 SoloLite processor.
+
+config SOC_VF610
+       bool "Vybrid Family VF610 support"
+       select CPU_V7
+       select ARM_GIC
+       select CLKSRC_OF
+       select PINCTRL
+       select PINCTRL_VF610
+       select VF_PIT_TIMER
+       select PL310_ERRATA_588369 if CACHE_PL310
+       select PL310_ERRATA_727915 if CACHE_PL310
+       select PL310_ERRATA_769419 if CACHE_PL310
+
+       help
+         This enable support for Freescale Vybrid VF610 processor.
+
 endif
 
 source "arch/arm/mach-imx/devices/Kconfig"