r->start < (phb->ioda.m64_base + phb->ioda.m64_size));
}
+static inline bool pnv_pci_is_m64_flags(unsigned long resource_flags)
+{
+ unsigned long flags = (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH);
+
+ return (resource_flags & flags) == flags;
+}
+
static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
{
+ s64 rc;
+
phb->ioda.pe_array[pe_no].phb = phb;
phb->ioda.pe_array[pe_no].pe_number = pe_no;
+ /*
+ * Clear the PE frozen state as it might be put into frozen state
+ * in the last PCI remove path. It's not harmful to do so when the
+ * PE is already in unfrozen state.
+ */
+ rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ if (rc != OPAL_SUCCESS)
+ pr_warn("%s: Error %lld unfreezing PHB#%d-PE#%d\n",
+ __func__, rc, phb->hose->global_number, pe_no);
+
return &phb->ioda.pe_array[pe_no];
}
static struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb)
{
- unsigned long pe = phb->ioda.total_pe_num - 1;
+ long pe;
for (pe = phb->ioda.total_pe_num - 1; pe >= 0; pe--) {
if (!test_and_set_bit(pe, phb->ioda.pe_alloc))
static void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
{
struct pnv_phb *phb = pe->phb;
+ unsigned int pe_num = pe->pe_number;
WARN_ON(pe->pdev);
memset(pe, 0, sizeof(struct pnv_ioda_pe));
- clear_bit(pe->pe_number, phb->ioda.pe_alloc);
+ clear_bit(pe_num, phb->ioda.pe_alloc);
}
/* The default M64 BAR is shared by all PEs */
struct device_node *dn = hose->dn;
struct resource *res;
u32 m64_range[2], i;
- const u32 *r;
+ const __be32 *r;
u64 pci_addr;
if (phb->type != PNV_PHB_IODA1 && phb->type != PNV_PHB_IODA2) {
pnv_pci_link_table_and_group(phb->hose->node, num,
tbl, &pe->table_group);
- pnv_pci_phb3_tce_invalidate_pe(pe);
+ pnv_pci_ioda2_tce_invalidate_pe(pe);
return 0;
}
if (ret)
pe_warn(pe, "Unmapping failed, ret = %ld\n", ret);
else
- pnv_pci_phb3_tce_invalidate_pe(pe);
+ pnv_pci_ioda2_tce_invalidate_pe(pe);
pnv_pci_unlink_table_and_group(table_group->tables[num], table_group);
}
#ifdef CONFIG_PCI_MSI
-static void pnv_ioda2_msi_eoi(struct irq_data *d)
+int64_t pnv_opal_pci_msi_eoi(struct irq_chip *chip, unsigned int hw_irq)
{
- unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
- struct irq_chip *chip = irq_data_get_irq_chip(d);
struct pnv_phb *phb = container_of(chip, struct pnv_phb,
ioda.irq_chip);
+
+ return opal_pci_msi_eoi(phb->opal_id, hw_irq);
+}
+
+static void pnv_ioda2_msi_eoi(struct irq_data *d)
+{
int64_t rc;
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ struct irq_chip *chip = irq_data_get_irq_chip(d);
- rc = opal_pci_msi_eoi(phb->opal_id, hw_irq);
+ rc = pnv_opal_pci_msi_eoi(chip, hw_irq);
WARN_ON_ONCE(rc);
icp_native_eoi(d);
irq_set_chip(virq, &phb->ioda.irq_chip);
}
+/*
+ * Returns true iff chip is something that we could call
+ * pnv_opal_pci_msi_eoi for.
+ */
+bool is_pnv_opal_msi(struct irq_chip *chip)
+{
+ return chip->irq_eoi == pnv_ioda2_msi_eoi;
+}
+EXPORT_SYMBOL_GPL(is_pnv_opal_msi);
+
static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
unsigned int hwirq, unsigned int virq,
unsigned int is_64, struct msi_msg *msg)
res = &pdev->resource[i + PCI_IOV_RESOURCES];
if (!res->flags || res->parent)
continue;
- if (!pnv_pci_is_m64(phb, res)) {
+ if (!pnv_pci_is_m64_flags(res->flags)) {
dev_warn(&pdev->dev, "Don't support SR-IOV with"
" non M64 VF BAR%d: %pR. \n",
i, res);
}
}
+#ifdef CONFIG_DEBUG_FS
+static int pnv_pci_diag_data_set(void *data, u64 val)
+{
+ struct pci_controller *hose;
+ struct pnv_phb *phb;
+ s64 ret;
+
+ if (val != 1ULL)
+ return -EINVAL;
+
+ hose = (struct pci_controller *)data;
+ if (!hose || !hose->private_data)
+ return -ENODEV;
+
+ phb = hose->private_data;
+
+ /* Retrieve the diag data from firmware */
+ ret = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
+ PNV_PCI_DIAG_BUF_SIZE);
+ if (ret != OPAL_SUCCESS)
+ return -EIO;
+
+ /* Print the diag data to the kernel log */
+ pnv_pci_dump_phb_diag_data(phb->hose, phb->diag.blob);
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pnv_pci_diag_data_fops, NULL,
+ pnv_pci_diag_data_set, "%llu\n");
+
+#endif /* CONFIG_DEBUG_FS */
+
static void pnv_pci_ioda_create_dbgfs(void)
{
#ifdef CONFIG_DEBUG_FS
sprintf(name, "PCI%04x", hose->global_number);
phb->dbgfs = debugfs_create_dir(name, powerpc_debugfs_root);
- if (!phb->dbgfs)
+ if (!phb->dbgfs) {
pr_warning("%s: Error on creating debugfs on PHB#%x\n",
__func__, hose->global_number);
+ continue;
+ }
+
+ debugfs_create_file("dump_diag_regs", 0200, phb->dbgfs, hose,
+ &pnv_pci_diag_data_fops);
}
#endif /* CONFIG_DEBUG_FS */
}
* alignment for any 64-bit resource, PCIe doesn't care and
* bridges only do 64-bit prefetchable anyway.
*/
- if (phb->ioda.m64_segsize && (type & IORESOURCE_MEM_64))
+ if (phb->ioda.m64_segsize && pnv_pci_is_m64_flags(type))
return phb->ioda.m64_segsize;
if (type & IORESOURCE_MEM)
return phb->ioda.m32_segsize;
struct pnv_phb *phb = pe->phb;
struct pnv_ioda_pe *slave, *tmp;
- /* Release slave PEs in compound PE */
- if (pe->flags & PNV_IODA_PE_MASTER) {
- list_for_each_entry_safe(slave, tmp, &pe->slaves, list)
- pnv_ioda_release_pe(slave);
- }
-
list_del(&pe->list);
switch (phb->type) {
case PNV_PHB_IODA1:
pnv_ioda_release_pe_seg(pe);
pnv_ioda_deconfigure_pe(pe->phb, pe);
- pnv_ioda_free_pe(pe);
+
+ /* Release slave PEs in the compound PE */
+ if (pe->flags & PNV_IODA_PE_MASTER) {
+ list_for_each_entry_safe(slave, tmp, &pe->slaves, list) {
+ list_del(&slave->list);
+ pnv_ioda_free_pe(slave);
+ }
+ }
+
+ /*
+ * The PE for root bus can be removed because of hotplug in EEH
+ * recovery for fenced PHB error. We need to mark the PE dead so
+ * that it can be populated again in PCI hot add path. The PE
+ * shouldn't be destroyed as it's the global reserved resource.
+ */
+ if (phb->ioda.root_pe_populated &&
+ phb->ioda.root_pe_idx == pe->pe_number)
+ phb->ioda.root_pe_populated = false;
+ else
+ pnv_ioda_free_pe(pe);
}
static void pnv_pci_release_device(struct pci_dev *pdev)
if (!pdn || pdn->pe_number == IODA_INVALID_PE)
return;
+ /*
+ * PCI hotplug can happen as part of EEH error recovery. The @pdn
+ * isn't removed and added afterwards in this scenario. We should
+ * set the PE number in @pdn to an invalid one. Otherwise, the PE's
+ * device count is decreased on removing devices while failing to
+ * be increased on adding devices. It leads to unbalanced PE's device
+ * count and eventually make normal PCI hotplug path broken.
+ */
pe = &phb->ioda.pe_array[pdn->pe_number];
+ pdn->pe_number = IODA_INVALID_PE;
+
WARN_ON(--pe->device_count < 0);
if (pe->device_count == 0)
pnv_ioda_release_pe(pe);
if (rc)
pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc);
- /* If we're running in kdump kerenl, the previous kerenl never
+ /*
+ * If we're running in kdump kernel, the previous kernel never
* shutdown PCI devices correctly. We already got IODA table
* cleaned out. So we have to issue PHB reset to stop all PCI
- * transactions from previous kerenl.
+ * transactions from previous kernel.
*/
if (is_kdump_kernel()) {
pr_info(" Issue PHB reset ...\n");
projects / cascardo / linux.git / blobdiff