def_bool y
select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_MIGHT_HAVE_PC_SERIO
select HAVE_AOUT if X86_32
select HAVE_UNSTABLE_SCHED_CLOCK
select ARCH_SUPPORTS_NUMA_BALANCING
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if !SWIOTLB
select HAVE_KRETPROBES
+ select GENERIC_EARLY_IOREMAP
select HAVE_OPTPROBES
select HAVE_KPROBES_ON_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_ARCH_SOFT_DIRTY
select CLOCKSOURCE_WATCHDOG
select GENERIC_CLOCKEVENTS
- select ARCH_CLOCKSOURCE_DATA if X86_64
+ select ARCH_CLOCKSOURCE_DATA
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
- select GENERIC_TIME_VSYSCALL if X86_64
+ select GENERIC_TIME_VSYSCALL
select KTIME_SCALAR if X86_32
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select RTC_LIB
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
+ select HAVE_CC_STACKPROTECTOR
+ select GENERIC_CPU_AUTOPROBE
select HAVE_ARCH_AUDITSYSCALL
config INSTRUCTION_DECODER
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
-config ARCH_HAS_CPU_AUTOPROBE
- def_bool y
-
config HAVE_SETUP_PER_CPU_AREA
def_bool y
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
- you have a system with more than one CPU, say Y.
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
- If you say N here, the kernel will run on single and multiprocessor
+ If you say N here, the kernel will run on uni- and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
- singleprocessor machines. On a singleprocessor machine, the kernel
+ uniprocessor machines. On a uniprocessor machine, the kernel
will run faster if you say N here.
Note that if you say Y here and choose architecture "586" or
for the following (non-PC) 32 bit x86 platforms:
Goldfish (Android emulator)
AMD Elan
- NUMAQ (IBM/Sequent)
RDC R-321x SoC
SGI 320/540 (Visual Workstation)
STA2X11-based (e.g. Northville)
- Summit/EXA (IBM x440)
- Unisys ES7000 IA32 series
Moorestown MID devices
If you have one of these systems, or if you want to build a
This option compiles in support for the CE4100 SOC for settop
boxes and media devices.
-config X86_WANT_INTEL_MID
+config X86_INTEL_MID
bool "Intel MID platform support"
depends on X86_32
depends on X86_EXTENDED_PLATFORM
- ---help---
- Select to build a kernel capable of supporting Intel MID platform
- systems which do not have the PCI legacy interfaces (Moorestown,
- Medfield). If you are building for a PC class system say N here.
-
-if X86_WANT_INTEL_MID
-
-config X86_INTEL_MID
- bool
-
-config X86_MDFLD
- bool "Medfield MID platform"
+ depends on X86_PLATFORM_DEVICES
depends on PCI
depends on PCI_GOANY
depends on X86_IO_APIC
- select X86_INTEL_MID
select SFI
+ select I2C
select DW_APB_TIMER
select APB_TIMER
- select I2C
- select SPI
select INTEL_SCU_IPC
- select X86_PLATFORM_DEVICES
select MFD_INTEL_MSIC
---help---
- Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin
- Internet Device(MID) platform.
- Unlike standard x86 PCs, Medfield does not have many legacy devices
- nor standard legacy replacement devices/features. e.g. Medfield does
- not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
+ Select to build a kernel capable of supporting Intel MID (Mobile
+ Internet Device) platform systems which do not have the PCI legacy
+ interfaces. If you are building for a PC class system say N here.
-endif
+ Intel MID platforms are based on an Intel processor and chipset which
+ consume less power than most of the x86 derivatives.
config X86_INTEL_LPSS
bool "Intel Low Power Subsystem Support"
depends on X86_32 && SMP
depends on X86_EXTENDED_PLATFORM
---help---
- This option compiles in the NUMAQ, Summit, bigsmp, ES7000,
- STA2X11, default subarchitectures. It is intended for a generic
- binary kernel. If you select them all, kernel will probe it
- one by one and will fallback to default.
+ This option compiles in the bigsmp and STA2X11 default
+ subarchitectures. It is intended for a generic binary
+ kernel. If you select them all, kernel will probe it one by
+ one and will fallback to default.
# Alphabetically sorted list of Non standard 32 bit platforms
-config X86_NUMAQ
- bool "NUMAQ (IBM/Sequent)"
- depends on X86_32_NON_STANDARD
- depends on PCI
- select NUMA
- select X86_MPPARSE
- ---help---
- This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
- NUMA multiquad box. This changes the way that processors are
- bootstrapped, and uses Clustered Logical APIC addressing mode instead
- of Flat Logical. You will need a new lynxer.elf file to flash your
- firmware with - send email to <Martin.Bligh@us.ibm.com>.
-
config X86_SUPPORTS_MEMORY_FAILURE
def_bool y
# MCE code calls memory_failure():
depends on X86_MCE
# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
- depends on !X86_NUMAQ
# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
depends on X86_64 || !SPARSEMEM
select ARCH_SUPPORTS_MEMORY_FAILURE
-config X86_VISWS
- bool "SGI 320/540 (Visual Workstation)"
- depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
- depends on X86_32_NON_STANDARD
- ---help---
- The SGI Visual Workstation series is an IA32-based workstation
- based on SGI systems chips with some legacy PC hardware attached.
-
- Say Y here to create a kernel to run on the SGI 320 or 540.
-
- A kernel compiled for the Visual Workstation will run on general
- PCs as well. See <file:Documentation/sgi-visws.txt> for details.
-
config STA2X11
bool "STA2X11 Companion Chip Support"
depends on X86_32_NON_STANDARD && PCI
option is selected the kernel will still be able to boot on
standard PC machines.
-config X86_SUMMIT
- bool "Summit/EXA (IBM x440)"
- depends on X86_32_NON_STANDARD
- ---help---
- This option is needed for IBM systems that use the Summit/EXA chipset.
- In particular, it is needed for the x440.
-
-config X86_ES7000
- bool "Unisys ES7000 IA32 series"
- depends on X86_32_NON_STANDARD && X86_BIGSMP
- ---help---
- Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
- supposed to run on an IA32-based Unisys ES7000 system.
-
config X86_32_IRIS
tristate "Eurobraille/Iris poweroff module"
depends on X86_32
memtest=4, mean do 4 test patterns.
If you are unsure how to answer this question, answer N.
-config X86_SUMMIT_NUMA
- def_bool y
- depends on X86_32 && NUMA && X86_32_NON_STANDARD
-
-config X86_CYCLONE_TIMER
- def_bool y
- depends on X86_SUMMIT
-
source "arch/x86/Kconfig.cpu"
config HPET_TIMER
# The code disables itself when not needed.
config DMI
default y
+ select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
bool "Enable DMI scanning" if EXPERT
---help---
Enabled scanning of DMI to identify machine quirks. Say Y
range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
default "1" if !SMP
default "8192" if MAXSMP
- default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
+ default "32" if SMP && X86_BIGSMP
default "8" if SMP
---help---
This allows you to specify the maximum number of CPUs which this
def_bool y
depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
-config X86_VISWS_APIC
- def_bool y
- depends on X86_32 && X86_VISWS
-
config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
bool "Reroute for broken boot IRQs"
depends on X86_IO_APIC
depends on X86_32 && X86_MCE
---help---
Include support for machine check handling on old Pentium 5 or WinChip
- systems. These typically need to be enabled explicitely on the command
+ systems. These typically need to be enabled explicitly on the command
line.
config X86_MCE_THRESHOLD
This options enables microcode patch loading support for Intel
processors.
- For latest news and information on obtaining all the required
- Intel ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ For the current Intel microcode data package go to
+ <https://downloadcenter.intel.com> and search for
+ 'Linux Processor Microcode Data File'.
config MICROCODE_AMD
bool "AMD microcode loading support"
def_bool y
depends on MICROCODE
-config MICROCODE_INTEL_LIB
- def_bool y
- depends on MICROCODE_INTEL
-
config MICROCODE_INTEL_EARLY
def_bool n
choice
prompt "High Memory Support"
- default HIGHMEM64G if X86_NUMAQ
default HIGHMEM4G
depends on X86_32
config NOHIGHMEM
bool "off"
- depends on !X86_NUMAQ
---help---
Linux can use up to 64 Gigabytes of physical memory on x86 systems.
However, the address space of 32-bit x86 processors is only 4
config HIGHMEM4G
bool "4GB"
- depends on !X86_NUMAQ
---help---
Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM.
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI))
- default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP)
+ default y if X86_BIGSMP
---help---
Enable NUMA (Non Uniform Memory Access) support.
For 64-bit this is recommended if the system is Intel Core i7
(or later), AMD Opteron, or EM64T NUMA.
- For 32-bit this is only needed on (rare) 32-bit-only platforms
- that support NUMA topologies, such as NUMAQ / Summit, or if you
- boot a 32-bit kernel on a 64-bit NUMA platform.
+ For 32-bit this is only needed if you boot a 32-bit
+ kernel on a 64-bit NUMA platform.
Otherwise, you should say N.
-comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
- depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
-
config AMD_NUMA
def_bool y
prompt "Old style AMD Opteron NUMA detection"
range 1 10
default "10" if MAXSMP
default "6" if X86_64
- default "4" if X86_NUMAQ
default "3"
depends on NEED_MULTIPLE_NODES
---help---
See Documentation/efi-stub.txt for more information.
+config EFI_MIXED
+ bool "EFI mixed-mode support"
+ depends on EFI_STUB && X86_64
+ ---help---
+ Enabling this feature allows a 64-bit kernel to be booted
+ on a 32-bit firmware, provided that your CPU supports 64-bit
+ mode.
+
+ Note that it is not possible to boot a mixed-mode enabled
+ kernel via the EFI boot stub - a bootloader that supports
+ the EFI handover protocol must be used.
+
+ If unsure, say N.
+
config SECCOMP
def_bool y
prompt "Enable seccomp to safely compute untrusted bytecode"
If unsure, say Y. Only embedded should say N here.
-config CC_STACKPROTECTOR
- bool "Enable -fstack-protector buffer overflow detection"
- ---help---
- This option turns on the -fstack-protector GCC feature. This
- feature puts, at the beginning of functions, a canary value on
- the stack just before the return address, and validates
- the value just before actually returning. Stack based buffer
- overflows (that need to overwrite this return address) now also
- overwrite the canary, which gets detected and the attack is then
- neutralized via a kernel panic.
-
- This feature requires gcc version 4.2 or above, or a distribution
- gcc with the feature backported. Older versions are automatically
- detected and for those versions, this configuration option is
- ignored. (and a warning is printed during bootup)
-
source kernel/Kconfig.hz
config KEXEC
Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
it has been loaded at and the compile time physical address
- (CONFIG_PHYSICAL_START) is ignored.
+ (CONFIG_PHYSICAL_START) is used as the minimum location.
-# Relocation on x86-32 needs some additional build support
+config RANDOMIZE_BASE
+ bool "Randomize the address of the kernel image"
+ depends on RELOCATABLE
+ depends on !HIBERNATION
+ default n
+ ---help---
+ Randomizes the physical and virtual address at which the
+ kernel image is decompressed, as a security feature that
+ deters exploit attempts relying on knowledge of the location
+ of kernel internals.
+
+ Entropy is generated using the RDRAND instruction if it is
+ supported. If RDTSC is supported, it is used as well. If
+ neither RDRAND nor RDTSC are supported, then randomness is
+ read from the i8254 timer.
+
+ The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET,
+ and aligned according to PHYSICAL_ALIGN. Since the kernel is
+ built using 2GiB addressing, and PHYSICAL_ALGIN must be at a
+ minimum of 2MiB, only 10 bits of entropy is theoretically
+ possible. At best, due to page table layouts, 64-bit can use
+ 9 bits of entropy and 32-bit uses 8 bits.
+
+ If unsure, say N.
+
+config RANDOMIZE_BASE_MAX_OFFSET
+ hex "Maximum kASLR offset allowed" if EXPERT
+ depends on RANDOMIZE_BASE
+ range 0x0 0x20000000 if X86_32
+ default "0x20000000" if X86_32
+ range 0x0 0x40000000 if X86_64
+ default "0x40000000" if X86_64
+ ---help---
+ The lesser of RANDOMIZE_BASE_MAX_OFFSET and available physical
+ memory is used to determine the maximal offset in bytes that will
+ be applied to the kernel when kernel Address Space Layout
+ Randomization (kASLR) is active. This must be a multiple of
+ PHYSICAL_ALIGN.
+
+ On 32-bit this is limited to 512MiB by page table layouts. The
+ default is 512MiB.
+
+ On 64-bit this is limited by how the kernel fixmap page table is
+ positioned, so this cannot be larger than 1GiB currently. Without
+ RANDOMIZE_BASE, there is a 512MiB to 1.5GiB split between kernel
+ and modules. When RANDOMIZE_BASE_MAX_OFFSET is above 512MiB, the
+ modules area will shrink to compensate, up to the current maximum
+ 1GiB to 1GiB split. The default is 1GiB.
+
+ If unsure, leave at the default value.
+
+# Relocation on x86 needs some additional build support
config X86_NEED_RELOCS
def_bool y
- depends on X86_32 && RELOCATABLE
+ depends on RANDOMIZE_BASE || (X86_32 && RELOCATABLE)
config PHYSICAL_ALIGN
hex "Alignment value to which kernel should be aligned"
- default "0x1000000"
+ default "0x200000"
range 0x2000 0x1000000 if X86_32
range 0x200000 0x1000000 if X86_64
---help---
If unsure, say N.
config COMPAT_VDSO
- def_bool y
- prompt "Compat VDSO support"
+ def_bool n
+ prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)"
depends on X86_32 || IA32_EMULATION
---help---
- Map the 32-bit VDSO to the predictable old-style address too.
+ Certain buggy versions of glibc will crash if they are
+ presented with a 32-bit vDSO that is not mapped at the address
+ indicated in its segment table.
- Say N here if you are running a sufficiently recent glibc
- version (2.3.3 or later), to remove the high-mapped
- VDSO mapping and to exclusively use the randomized VDSO.
+ The bug was introduced by f866314b89d56845f55e6f365e18b31ec978ec3a
+ and fixed by 3b3ddb4f7db98ec9e912ccdf54d35df4aa30e04a and
+ 49ad572a70b8aeb91e57483a11dd1b77e31c4468. Glibc 2.3.3 is
+ the only released version with the bug, but OpenSUSE 9
+ contains a buggy "glibc 2.3.2".
- If unsure, say Y.
+ The symptom of the bug is that everything crashes on startup, saying:
+ dl_main: Assertion `(void *) ph->p_vaddr == _rtld_local._dl_sysinfo_dso' failed!
+
+ Saying Y here changes the default value of the vdso32 boot
+ option from 1 to 0, which turns off the 32-bit vDSO entirely.
+ This works around the glibc bug but hurts performance.
+
+ If unsure, say N: if you are compiling your own kernel, you
+ are unlikely to be using a buggy version of glibc.
config CMDLINE_BOOL
bool "Built-in kernel command line"
bool
depends on STA2X11
+config IOSF_MBI
+ bool
+ depends on PCI
+ ---help---
+ To be selected by modules requiring access to the Intel OnChip System
+ Fabric (IOSF) Sideband MailBox Interface (MBI). For MBI platforms
+ enumerable by PCI.
+
source "net/Kconfig"
source "drivers/Kconfig"