tf->hob_lbah = buf[10];
tf->nsect = buf[12];
tf->hob_nsect = buf[13];
+ if (ata_id_has_ncq_autosense(dev->id))
+ tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
return 0;
}
return err_mask;
}
+/**
+ * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
+ * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
+ * @cmd: scsi command for which the sense code should be set
+ *
+ * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
+ * SENSE. This function is an EH helper.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+static void ata_eh_request_sense(struct ata_queued_cmd *qc,
+ struct scsi_cmnd *cmd)
+{
+ struct ata_device *dev = qc->dev;
+ struct ata_taskfile tf;
+ unsigned int err_mask;
+
+ if (qc->ap->pflags & ATA_PFLAG_FROZEN) {
+ ata_dev_warn(dev, "sense data available but port frozen\n");
+ return;
+ }
+
+ if (!cmd || qc->flags & ATA_QCFLAG_SENSE_VALID)
+ return;
+
+ if (!ata_id_sense_reporting_enabled(dev->id)) {
+ ata_dev_warn(qc->dev, "sense data reporting disabled\n");
+ return;
+ }
+
+ DPRINTK("ATA request sense\n");
+
+ ata_tf_init(dev, &tf);
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
+ tf.command = ATA_CMD_REQ_SENSE_DATA;
+ tf.protocol = ATA_PROT_NODATA;
+
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+ /* Ignore err_mask; ATA_ERR might be set */
+ if (tf.command & ATA_SENSE) {
+ ata_scsi_set_sense(dev, cmd, tf.lbah, tf.lbam, tf.lbal);
+ qc->flags |= ATA_QCFLAG_SENSE_VALID;
+ } else {
+ ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
+ tf.command, err_mask);
+ }
+}
+
/**
* atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
* @dev: device to perform REQUEST_SENSE to
memcpy(&qc->result_tf, &tf, sizeof(tf));
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
+ if ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary) {
+ char sense_key, asc, ascq;
+
+ sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
+ asc = (qc->result_tf.auxiliary >> 8) & 0xff;
+ ascq = qc->result_tf.auxiliary & 0xff;
+ ata_scsi_set_sense(dev, qc->scsicmd, sense_key, asc, ascq);
+ ata_scsi_set_sense_information(dev, qc->scsicmd,
+ &qc->result_tf);
+ qc->flags |= ATA_QCFLAG_SENSE_VALID;
+ }
+
ehc->i.err_mask &= ~AC_ERR_DEV;
}
return ATA_EH_RESET;
}
- if (stat & (ATA_ERR | ATA_DF))
+ if (stat & (ATA_ERR | ATA_DF)) {
qc->err_mask |= AC_ERR_DEV;
- else
+ /*
+ * Sense data reporting does not work if the
+ * device fault bit is set.
+ */
+ if (stat & ATA_DF)
+ stat &= ~ATA_SENSE;
+ } else {
return 0;
+ }
switch (qc->dev->class) {
case ATA_DEV_ATA:
case ATA_DEV_ZAC:
+ if (stat & ATA_SENSE)
+ ata_eh_request_sense(qc, qc->scsicmd);
if (err & ATA_ICRC)
qc->err_mask |= AC_ERR_ATA_BUS;
if (err & (ATA_UNC | ATA_AMNF))
tmp = atapi_eh_request_sense(qc->dev,
qc->scsicmd->sense_buffer,
qc->result_tf.feature >> 4);
- if (!tmp) {
- /* ATA_QCFLAG_SENSE_VALID is used to
- * tell atapi_qc_complete() that sense
- * data is already valid.
- *
- * TODO: interpret sense data and set
- * appropriate err_mask.
- */
+ if (!tmp)
qc->flags |= ATA_QCFLAG_SENSE_VALID;
- } else
+ else
qc->err_mask |= tmp;
}
}
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+ int ret = scsi_check_sense(qc->scsicmd);
+ /*
+ * SUCCESS here means that the sense code could
+ * evaluated and should be passed to the upper layers
+ * for correct evaluation.
+ * FAILED means the sense code could not interpreted
+ * and the device would need to be reset.
+ * NEEDS_RETRY and ADD_TO_MLQUEUE means that the
+ * command would need to be retried.
+ */
+ if (ret == NEEDS_RETRY || ret == ADD_TO_MLQUEUE) {
+ qc->flags |= ATA_QCFLAG_RETRY;
+ qc->err_mask |= AC_ERR_OTHER;
+ } else if (ret != SUCCESS) {
+ qc->err_mask |= AC_ERR_HSM;
+ }
+ }
if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
action |= ATA_EH_RESET;
{ ATA_CMD_CFA_WRITE_MULT_NE, "CFA WRITE MULTIPLE WITHOUT ERASE" },
{ ATA_CMD_REQ_SENSE_DATA, "REQUEST SENSE DATA EXT" },
{ ATA_CMD_SANITIZE_DEVICE, "SANITIZE DEVICE" },
+ { ATA_CMD_ZAC_MGMT_IN, "ZAC MANAGEMENT IN" },
+ { ATA_CMD_ZAC_MGMT_OUT, "ZAC MANAGEMENT OUT" },
{ ATA_CMD_READ_LONG, "READ LONG (with retries)" },
{ ATA_CMD_READ_LONG_ONCE, "READ LONG (without retries)" },
{ ATA_CMD_WRITE_LONG, "WRITE LONG (with retries)" },
#ifdef CONFIG_ATA_VERBOSE_ERROR
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
- ATA_ERR)) {
+ ATA_SENSE | ATA_ERR)) {
if (res->command & ATA_BUSY)
ata_dev_err(qc->dev, "status: { Busy }\n");
else
- ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
+ ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
res->command & ATA_DRDY ? "DRDY " : "",
res->command & ATA_DF ? "DF " : "",
res->command & ATA_DRQ ? "DRQ " : "",
+ res->command & ATA_SENSE ? "SENSE " : "",
res->command & ATA_ERR ? "ERR " : "");
}
projects / cascardo / linux.git / blobdiff