I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
}
+
+ if (IS_VALLEYVIEW(dev)) {
+ struct intel_digital_port *dport =
+ enc_to_dig_port(&encoder->base);
+ int channel = vlv_dport_to_channel(dport);
+
+ vlv_wait_port_ready(dev_priv, channel);
+ }
}
static void intel_disable_hdmi(struct intel_encoder *encoder)
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+ int clock_12bpc = pipe_config->requested_mode.clock * 3 / 2;
+ int desired_bpp;
if (intel_hdmi->color_range_auto) {
/* See CEA-861-E - 5.1 Default Encoding Parameters */
/*
* HDMI is either 12 or 8, so if the display lets 10bpc sneak
* through, clamp it down. Note that g4x/vlv don't support 12bpc hdmi
- * outputs.
+ * outputs. We also need to check that the higher clock still fits
+ * within limits.
*/
- if (pipe_config->pipe_bpp > 8*3 && HAS_PCH_SPLIT(dev)) {
- DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
- pipe_config->pipe_bpp = 12*3;
+ if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= 225000
+ && HAS_PCH_SPLIT(dev)) {
+ DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
+ desired_bpp = 12*3;
+
+ /* Need to adjust the port link by 1.5x for 12bpc. */
+ adjusted_mode->clock = clock_12bpc;
+ pipe_config->pixel_target_clock =
+ pipe_config->requested_mode.clock;
} else {
- DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
- pipe_config->pipe_bpp = 8*3;
+ DRM_DEBUG_KMS("picking bpc to 8 for HDMI output\n");
+ desired_bpp = 8*3;
+ }
+
+ if (!pipe_config->bw_constrained) {
+ DRM_DEBUG_KMS("forcing pipe bpc to %i for HDMI\n", desired_bpp);
+ pipe_config->pipe_bpp = desired_bpp;
+ }
+
+ if (adjusted_mode->clock > 225000) {
+ DRM_DEBUG_KMS("too high HDMI clock, rejecting mode\n");
+ return false;
}
return true;
return 0;
}
+static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(encoder->base.crtc);
+ int port = vlv_dport_to_channel(dport);
+ int pipe = intel_crtc->pipe;
+ u32 val;
+
+ if (!IS_VALLEYVIEW(dev))
+ return;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+ /* Enable clock channels for this port */
+ val = intel_dpio_read(dev_priv, DPIO_DATA_LANE_A(port));
+ val = 0;
+ if (pipe)
+ val |= (1<<21);
+ else
+ val &= ~(1<<21);
+ val |= 0x001000c4;
+ intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL(port), val);
+
+ /* HDMI 1.0V-2dB */
+ intel_dpio_write(dev_priv, DPIO_TX_OCALINIT(port), 0);
+ intel_dpio_write(dev_priv, DPIO_TX_SWING_CTL4(port),
+ 0x2b245f5f);
+ intel_dpio_write(dev_priv, DPIO_TX_SWING_CTL2(port),
+ 0x5578b83a);
+ intel_dpio_write(dev_priv, DPIO_TX_SWING_CTL3(port),
+ 0x0c782040);
+ intel_dpio_write(dev_priv, DPIO_TX3_SWING_CTL4(port),
+ 0x2b247878);
+ intel_dpio_write(dev_priv, DPIO_PCS_STAGGER0(port), 0x00030000);
+ intel_dpio_write(dev_priv, DPIO_PCS_CTL_OVER1(port),
+ 0x00002000);
+ intel_dpio_write(dev_priv, DPIO_TX_OCALINIT(port),
+ DPIO_TX_OCALINIT_EN);
+
+ /* Program lane clock */
+ intel_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF0(port),
+ 0x00760018);
+ intel_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF8(port),
+ 0x00400888);
+}
+
+static void intel_hdmi_pre_pll_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int port = vlv_dport_to_channel(dport);
+
+ if (!IS_VALLEYVIEW(dev))
+ return;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+ /* Program Tx lane resets to default */
+ intel_dpio_write(dev_priv, DPIO_PCS_TX(port),
+ DPIO_PCS_TX_LANE2_RESET |
+ DPIO_PCS_TX_LANE1_RESET);
+ intel_dpio_write(dev_priv, DPIO_PCS_CLK(port),
+ DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
+ DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
+ (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
+ DPIO_PCS_CLK_SOFT_RESET);
+
+ /* Fix up inter-pair skew failure */
+ intel_dpio_write(dev_priv, DPIO_PCS_STAGGER1(port), 0x00750f00);
+ intel_dpio_write(dev_priv, DPIO_TX_CTL(port), 0x00001500);
+ intel_dpio_write(dev_priv, DPIO_TX_LANE(port), 0x40400000);
+
+ intel_dpio_write(dev_priv, DPIO_PCS_CTL_OVER1(port),
+ 0x00002000);
+ intel_dpio_write(dev_priv, DPIO_TX_OCALINIT(port),
+ DPIO_TX_OCALINIT_EN);
+}
+
+static void intel_hdmi_post_disable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ int port = vlv_dport_to_channel(dport);
+
+ /* Reset lanes to avoid HDMI flicker (VLV w/a) */
+ mutex_lock(&dev_priv->dpio_lock);
+ intel_dpio_write(dev_priv, DPIO_PCS_TX(port), 0x00000000);
+ intel_dpio_write(dev_priv, DPIO_PCS_CLK(port), 0x00e00060);
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
static void intel_hdmi_destroy(struct drm_connector *connector)
{
drm_sysfs_connector_remove(connector);
intel_encoder->enable = intel_enable_hdmi;
intel_encoder->disable = intel_disable_hdmi;
intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
+ if (IS_VALLEYVIEW(dev)) {
+ intel_encoder->pre_enable = intel_hdmi_pre_enable;
+ intel_encoder->pre_pll_enable = intel_hdmi_pre_pll_enable;
+ intel_encoder->post_disable = intel_hdmi_post_disable;
+ }
intel_encoder->type = INTEL_OUTPUT_HDMI;
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
projects / cascardo / linux.git / blobdiff